• Zarejestrowany: 2024-06-22
  • Posty: 3

Temat: Checkpoint L-71 openwrt

Wpadł mi w ręce taki cudak wydaje się że podoła wielu zadaniom więc pytanie brzmi: Czy ktoś zainstalował na takim sprzęcie openwrt ??  A może jest ktoś w stanie pomóc ? Po necie chodzi instrukcja do L50 ale skąd  wziąć kompilację pod tego ARM

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,153

Odp: Checkpoint L-71 openwrt

Oficjalnie nie jest wspierane i chyba nie ma nawet nieoficjalnych obrazów. Z tego co pamiętam ktoś się brał za to na forum openwrt, ale chyba nie było rezultatów jego prac.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez lexmark3200 (edytowany przez lexmark3200 2024-06-22 11:33:16)

  • Zarejestrowany: 2021-11-19
  • Posty: 1,014

Odp: Checkpoint L-71 openwrt

ambroży chyba wysyłał nawet taki modeł do kogoś, kto miał coś tam z tym działać...
Ale chyba temat zdechł w zalążku ;-(

4 Odpowiedź przez mpstrong

  • Zarejestrowany: 2024-06-22
  • Posty: 3

Odp: Checkpoint L-71 openwrt

Gdzieś czytałem że trzeba napisać do checkpoint żeby coś tam wystawili i wtedy można działać. Orientujecie się howto??

5 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,153

Odp: Checkpoint L-71 openwrt

W znakomitej większości urządzenia działają na linuksie. Więc producent sprzedając taki sprzęt powinien być zobowiązany udostępnić źródła kernela oraz ew systemu które na pewno zmodyfikował, bo zobowiązuje go do tego licencja GPL. Ale w praktyce to różnie bywa i często producenci ignorują to.
Masz urządzenie, kupiłeś, jeżeli tam faktycznie działa kernel linuksowy to wysyłaj do producenta żądanie udostępnienia źródeł kernela/systemu.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

6 Odpowiedź przez ambrozy5 (edytowany przez ambrozy5 2024-06-22 15:58:43)

  • Zarejestrowany: 2015-01-27
  • Posty: 2,429

Odp: Checkpoint L-71 openwrt

lexmark3200 napisał/a:

ambroży chyba wysyłał nawet taki modeł do kogoś, kto miał coś tam z tym działać...
Ale chyba temat zdechł w zalążku ;-(


Mialem kilka szt, jeden wysłałem do Królik, mam jeszcze l72 z sfp ale nic jeszcze nie obilem. Moze wspolnymi silami cos ogarniemy

Dom : router https://i.imgur.com/IuB6Zwy.png | TP-LINK T1700G-28TQ |Zyxel XGS-1210-12 | 6x Ruckus r310 unleashed  + Ruckus icx7150-c12p | Truenas scale 124TB 25Gb| Xpenology 12TB | apc smart ups 750 lcd smile 100Mb/s - 25Gb/s
Podróżne : GL.Inet MT3000  +1TB hdd
Działka : rb260gs 1j wdm 1Gb+ ruckus r310 + nb m5 + kilka kamer ip  + panel 285Wp + lifepo4 12v 60Ah .

7 Odpowiedź przez ambrozy5

  • Zarejestrowany: 2015-01-27
  • Posty: 2,429

Odp: Checkpoint L-71 openwrt

U-Boot 2015.01-alpine_db_s2-1.65.1-HAL (Apr 03 2016 - 12:29:23)  Check Point ver                                sion: 75
 
I2C:   ready
DRAM:  2 GiB
 
 
 
   ______  __                    __        _______           _            _
 .' ___  |[  |                  [  |  _   |_   __ \         (_)          / |_
/ .'   \_| | |--.  .---.  .---.  | | / ]    | |__) | .--.   __   _ .--. `| |-'
| |        | .-. |/ /__\\/ /'`\] | '' <     |  ___// .'`\ \[  | [ `.-. | | |
\ `.___.'\ | | | || \__.,| \__.  | |`\ \   _| |_   | \__. | | |  | | | | | |,
 `.____ .'[___]|__]'.__.''.___.'[__|  \_] |_____|   '.__.' [___][___||__]\__/
 
 
power_init_board: EEPROM per device information - using defaults!
Board config ID: alpine_db (S2-L72)
NAND:  2048 MiB
  00:00.0     - 1c36:0002 - Network controller
  00:01.0     - 1c36:0001 - Network controller
  00:02.0     - 1c36:0002 - Network controller
  00:03.0     - 1c36:0001 - Network controller
  00:04.0     - 1c36:0011 - Cryptographic device
  00:05.0     - 1c36:0021 - Base system peripheral
pci_init_board_external: PCIE_0 no link found
pci_init_board_external: PCIE_1 no link found
PCIE_2: Link up. Speed 5GT/s Width x1
  01:00.0     - 1912:0014 - Serial bus controller
In:    serial
Out:   serial
Err:   serial
Net:   al_eth0, al_eth1 [PRIME], al_eth2, al_eth3
Trying to read nand: 262144 bytes from offset 3145728
ecc_read_page: corrected increased to 1
Read nand: 262144 bytes from nand
blob magic: a5a51234
blob crc: 99173cd3
Verifying CRC for settings area... Done
 
************ Hit 'Ctrl + C' for boot menu ************
 
Setting bootaddr to 0x8000200
Enabling network ports...
Done.
 
 
Welcome to Gaia Embedded Boot Menu :
 
        1. Start in normal Mode
        2. Start in debug Mode
        3. Start in maintenance Mode
        4. Restore to Factory Defaults (local)
        5. Install/Update Image from Network
        6. Restart Boot-Loader
        7. Run Hardware diagnostics
        8. Upload preset configuration file
 
        Please enter your selection (press ENTER to finish) :
Dom : router https://i.imgur.com/IuB6Zwy.png | TP-LINK T1700G-28TQ |Zyxel XGS-1210-12 | 6x Ruckus r310 unleashed  + Ruckus icx7150-c12p | Truenas scale 124TB 25Gb| Xpenology 12TB | apc smart ups 750 lcd smile 100Mb/s - 25Gb/s
Podróżne : GL.Inet MT3000  +1TB hdd
Działka : rb260gs 1j wdm 1Gb+ ruckus r310 + nb m5 + kilka kamer ip  + panel 285Wp + lifepo4 12v 60Ah .

8 Odpowiedź przez ambrozy5 (edytowany przez ambrozy5 2024-06-22 16:52:23)

  • Zarejestrowany: 2015-01-27
  • Posty: 2,429

Odp: Checkpoint L-71 openwrt

o ile z l-50 się udało, ponieważ kirkwood wspierał kwboot i dało się wgrać mu u-boot przez serial to tu już nie jest kolorowo i odrazu uruchamia się do gaia ...

        Please enter your selection (press ENTER to finish) :2

Going to boot from local image (Debug Mode)...


(getenv(cp_quiet);=<NULL>Trying to read nand: 262144 bytes from offset 3145728
ecc_read_page: corrected increased to 2
Read nand: 262144 bytes from nand
blob magic: a5a51234
blob crc: 99173cd3
Verifying CRC for settings area... Done
Erasing redundant NAND...
Erasing at 0x2c0000 -- 100% complete.
Writing to redundant NAND... OK
Saving Environment to NAND...
Erasing NAND...
Erasing at 0x280000 -- 100% complete.
Writing to NAND... OK
bootargs=boardFlavor=alpine_db_s2 console=ttyS0,115200 noExtPorts= cp_net_config=3,(00:1C:7F:73:8D:3D)(00:1C:7F:73:8D:3E)(00:1C:7F:73:8D:3F) uboot_ver=75 pci=pcie_bus_perf
device 0 offset 0x380000, size 0x7fc80000
do_nand: set partition base address to=380000

NAND read: device 0 offset 0x380000, size 0x1000000
ecc_read_page: corrected increased to 3
ecc_read_page: corrected increased to 4
ecc_read_page: corrected increased to 5
 16777216 bytes read: OK
## Booting kernel from Legacy Image at 08001000 ...
   Image Name:   Linux-3.10.20-al-5.0-pr2
   Created:      2016-06-06  14:04:32 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    8507192 Bytes = 8.1 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 03b2c008
   Booting using the fdt blob at 0x3b2c008
   Loading Kernel Image ... OK
   reserving fdt memory region: addr=0 size=100000
   Loading Device Tree to 03b10000, end 03b17bd1 ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.10.20-al-5.0-pr2 (builder@Lnx50BccCmp8.checkpoint.com) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jun 6 17:04:00 IDT 2016
CPU: ARMv7 Processor [412fc0f4] revision 4 (ARMv7), cr=30c7387d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine: AnnapurnaLabs Alpine (Device Tree), model: Annapurna Labs Alpine Dev Board
Memory policy: ECC disabled, Data cache writealloc
PERCPU: Embedded 9 pages/cpu @c1c57000 s12800 r8192 d15872 u36864
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522768
Kernel command line: boardFlavor=alpine_db_s2 console=ttyS0,115200 noExtPorts= cp_net_config=3,(00:1C:7F:73:8D:3D)(00:1C:7F:73:8D:3E)(00:1C:7F:73:8D:3F) uboot_ver=75 pci=pcie_bus_perf
Board type ID: 2
U-boot version: 75
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2048MB = 2048MB total
Memory: 2067152k/2067152k available, 30000k reserved, 1318912K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xb0000000 - 0xbfe00000   ( 254 MB)
      .text : 0xc0008000 - 0xc06e4530   (7026 kB)
      .init : 0xc06e5000 - 0xc0b8b200   (4761 kB)
      .data : 0xc0b8c000 - 0xc0bdc990   ( 323 kB)
       .bss : 0xc0bdc990 - 0xc0c40f5c   ( 402 kB)
Hierarchical RCU implementation.
NR_IRQS:16 nr_irqs:16 16
Architected local timer running at 50.00MHz (phys).
Switching to timer-based delay loop
sched_clock: ARM arch timer >56 bits at 50000kHz, resolution 20ns
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
CPU speed: 1.7GHz
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0xc0021310 - 0xc0021368
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: Booted secondary processor
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: Booted secondary processor
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Brought up 4 CPUs
SMP: Total of 4 processors activated.
CPU: All CPU(s) started in HYP mode.
CPU: Virtualization extensions available.
devtmpfs: initialized
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
Initializing System Fabric
Enabling IO Cache Coherency.
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
Serial: AMBA PL011 UART driver
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pcf857x 0-0020: probed
pcf857x 0-0021: probed
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Switching to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
kvm [1]: gic_main@fb004000 IRQ25
kvm [1]: arch-timer IRQ27
kvm [1]: Hyp mode initialized successfully
hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
al-pcie pcie-internal.3: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfeffffff]
pci_bus 0000:00: root bus resource [bus 00]
pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
pci 0000:00:00.0: PCI-E Max Payload Size set to  128/ 256 (was  128), Max Read Rq  128
pci 0000:00:01.0: PCI-E Max Payload Size set to  128/ 256 (was  128), Max Read Rq  128
pci 0000:00:02.0: PCI-E Max Payload Size set to  128/ 256 (was  128), Max Read Rq  128
pci 0000:00:03.0: PCI-E Max Payload Size set to  128/ 256 (was  128), Max Read Rq  128
pci 0000:00:04.0: PCI-E Max Payload Size set to  128/ 256 (was  128), Max Read Rq  128
pci 0000:00:05.0: PCI-E Max Payload Size set to  128/ 256 (was  128), Max Read Rq  128
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 0: assigned [mem 0xfe000000-0xfe01ffff 64bit]
pci 0000:00:00.0: BAR 7: assigned [mem 0xfe020000-0xfe07ffff 64bit]
pci 0000:00:01.0: BAR 0: assigned [mem 0xfe080000-0xfe09ffff 64bit]
pci 0000:00:02.0: BAR 0: assigned [mem 0xfe0a0000-0xfe0bffff 64bit]
pci 0000:00:02.0: BAR 7: assigned [mem 0xfe0c0000-0xfe11ffff 64bit]
pci 0000:00:03.0: BAR 0: assigned [mem 0xfe120000-0xfe13ffff 64bit]
pci 0000:00:04.0: BAR 0: assigned [mem 0xfe140000-0xfe15ffff 64bit]
pci 0000:00:04.0: BAR 7: assigned [mem 0xfe160000-0xfe17ffff 64bit]
pci 0000:00:05.0: BAR 0: assigned [mem 0xfe180000-0xfe19ffff 64bit]
pci 0000:00:05.0: BAR 7: assigned [mem 0xfe1a0000-0xfe1bffff 64bit]
pci 0000:00:00.0: BAR 4: assigned [mem 0xfe1c0000-0xfe1c3fff 64bit]
pci 0000:00:01.0: BAR 4: assigned [mem 0xfe1c4000-0xfe1c7fff 64bit]
pci 0000:00:02.0: BAR 4: assigned [mem 0xfe1c8000-0xfe1cbfff 64bit]
pci 0000:00:03.0: BAR 4: assigned [mem 0xfe1cc000-0xfe1cffff 64bit]
pci 0000:00:04.0: BAR 4: assigned [mem 0xfe1d0000-0xfe1d1fff 64bit]
pci 0000:00:05.0: BAR 4: assigned [mem 0xfe1d2000-0xfe1d3fff 64bit]
pci 0000:00:00.0: BAR 2: assigned [mem 0xfe1d4000-0xfe1d4fff 64bit]
pci 0000:00:01.0: BAR 2: assigned [mem 0xfe1d5000-0xfe1d5fff 64bit]
pci 0000:00:02.0: BAR 2: assigned [mem 0xfe1d6000-0xfe1d6fff 64bit]
pci 0000:00:03.0: BAR 2: assigned [mem 0xfe1d7000-0xfe1d7fff 64bit]
PCIe 1: Link up. speed gen2 negotiated width 1
al-pcie fd840000.pcie-external2: link up: speed Gen 2 width x1
al-pcie fd840000.pcie-external2: al_pcie_probe: [pcie 1] use DMA for read from f0000000 to f7ffffff
al-pcie fd840000.pcie-external2: al_pcie_probe: [pcie 1] use DMA for write from f0000000 to f000ffff
Configuring PCIE for IOCC
PCIE_1: snoop mode enable
al-pcie fd840000.pcie-external2: PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [io  0x30000-0x3ffff]
pci_bus 0001:00: root bus resource [mem 0xf0010000-0xf7ffffff]
pci_bus 0001:00: root bus resource [bus 00-ff]
pci 0001:00:00.0: PCI-E Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256
PCI: bus0: Fast back to back transfers disabled
pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0001:01:00.0: PCI-E Max Payload Size set to  128/ 128 (was  128), Max Read Rq  128
PCI: bus1: Fast back to back transfers disabled
pci 0001:00:00.0: BAR 14: assigned [mem 0xf0100000-0xf01fffff]
pci 0001:00:00.0: BAR 0: assigned [mem 0xf0010000-0xf0010fff]
pci 0001:00:00.0: BAR 1: assigned [mem 0xf0011000-0xf0011fff pref]
pci 0001:01:00.0: BAR 0: assigned [mem 0xf0100000-0xf0101fff 64bit]
pci 0001:00:00.0: PCI bridge to [bus 01]
pci 0001:00:00.0:   bridge window [mem 0xf0100000-0xf01fffff]
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 1461
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
########  init_hwwatchdog_sysfs error is 0, if OK, configuraing wdt sysfs and checking if wdt thread is needed
al_dma: Annapurna Labs DMA Driver 0.01
PCI: enabling device 0000:00:05.0 (0000 -> 0002)
pci 0000:00:05.1: PCI-E Max Payload Size set to  128/ 128 (was  128), Max Read Rq  128
PCI: enabling device 0000:00:05.1 (0400 -> 0402)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
fd883000.uart0: ttyS0 at MMIO 0xfd883000 (irq = 49) is a 16550A
console [ttyS0] enabled
fd884000.uart1: ttyS1 at MMIO 0xfd884000 (irq = 50) is a 16550A
fd885000.uart2: ttyS2 at MMIO 0xfd885000 (irq = 51) is a 16550A
CP LED driver initialize
brd: module loaded
loop: module loaded
al_nand_probe: AnnapurnaLabs nand driver
ONFI param page 0 valid
ONFI flash detected
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xa5 (Micron MT29F16G08ADBCAH4), 2048MiB, page size: 4096, OOB size: 224
Scanning device for bad blocks
11 ofpart partitions found on MTD device Alpine nand flash
Creating 11 MTD partitions on "Alpine nand flash":
0x000000000000-0x000000300000 : "al_boot"
0x000000200000-0x000000300000 : "device_tree"
0x000000380000-0x000001380000 : "linux_kernel"
0x000001380000-0x00000ef80000 : "ubifs"
0x00000ef80000-0x00000ff80000 : "linux_kernel2"
0x00000ff80000-0x00001db80000 : "ubifs-2"
0x00001db80000-0x000029f80000 : "default-sw"
0x000029f80000-0x000069f80000 : "logs"
0x000069f80000-0x00006a080000 : "preset"
0x00006a080000-0x00006a180000 : "adsl"
0x00006a180000-0x000080000000 : "storage"
dw_spi_mmio fd882000.spi: master is unqueued, this is deprecated
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
al_eth_drv: AnnapurnaLabs unified 1GbE and 10GbE Ethernet Driver al_eth v0.2 (Feb 18, 2013)
al_eth 0000:00:00.0: Board info: phy exist No. phy addr 0. mdio freq 2500 Khz. SFP connected No. media 6
cp_gtw_parse_net_config=3,(00:1C:7F:73:8D:3D)(00:1C:7F:73:8D:3E)(00:1C:7F:73:8D:3F)number of interfaces in command line is 3
      o Using default MTU 1500
al_eth 0000:00:00.0 eth0: AnnapurnaLabs unified 1Gbe/10Gbe found at mem fe000000, mac addr 00:1c:7f:73:8d:3e
al_eth 0000:00:01.0: Board info: phy exist Yes. phy addr 1. mdio freq 1000 Khz. SFP connected No. media 1
al_eth 0000:00:01.0 eth1: AnnapurnaLabs unified 1Gbe/10Gbe found at mem fe080000, mac addr 00:1c:7f:73:8d:3f
al_eth 0000:00:02.0: Board info: phy exist No. phy addr 0. mdio freq 2500 Khz. SFP connected No. media 6
al_eth 0000:00:02.0 eth2: AnnapurnaLabs unified 1Gbe/10Gbe found at mem fe0a0000, mac addr 00:1c:7f:73:8d:3d
al_eth 0000:00:03.0: Board info: phy exist No. phy addr 0. mdio freq 2500 Khz. SFP connected No. media 1
al_eth 0000:00:03.0 eth3: AnnapurnaLabs unified 1Gbe/10Gbe found at mem fe120000, mac addr de:3c:9f:fd:4f:9c
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbcore: registered new interface driver cdc_ether
GobiNet: 2013-10-08/NTGR_2.21
usbcore: registered new interface driver GobiNet
usbcore: registered new interface driver sierra_net
PCI: enabling device 0001:01:00.0 (0140 -> 0142)
xhci_hcd 0001:01:00.0: xHCI Host Controller
xhci_hcd 0001:01:00.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
xhci_hcd 0001:01:00.0: xHCI Host Controller
xhci_hcd 0001:01:00.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver aircable
usbserial: USB Serial support registered for aircable
usbcore: registered new interface driver belkin_sa
usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
usbcore: registered new interface driver usb_debug
usbserial: USB Serial support registered for debug
usbcore: registered new interface driver omninet
usbserial: USB Serial support registered for ZyXEL - omni.net lcd plus usb
usbcore: registered new interface driver option
usbserial: USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver pl2303
usbserial: USB Serial support registered for pl2303
usbcore: registered new interface driver qcserial
usbserial: USB Serial support registered for Qualcomm USB modem
usbcore: registered new interface driver sierra
usbserial: USB Serial support registered for Sierra USB modem
usbcore: registered new interface driver GobiSerial
usbserial: USB Serial support registered for GobiSerial
GobiSerial: 2013-10-08/NTGR_2.12:GobiSerial
usbcore: registered new interface driver zte_ev
usbserial: USB Serial support registered for zte_ev
mousedev: PS/2 mouse device common for all mice
rtc-ds1307 0-0068: rtc core: registered ds1337 as rtc0
i2c /dev entries driver
nct7802: sensors_nct7802_init
nct7802: snct7802_probe
nct7802: snct7802_probe
i2c i2c-0: Invalid probe address 0xac54
al_thermal_probe: Thermal Sensor Loaded at: 0xf0176a00.
al_mc_edac fb080000.mc: No ECC present, or ECC disabled
cpuidle: using governor ladder
cpuidle: using governor menu
al_crypto: Annapurna Labs Crypto Driver 0.01
PCI: enabling device 0000:00:04.0 (0000 -> 0002)
pci 0000:00:04.1: PCI-E Max Payload Size set to  128/ 128 (was  128), Max Read Rq  128
PCI: enabling device 0000:00:04.1 (0400 -> 0402)
al_crypto 0000:00:04.1: al_crypto_pci_probe: Skipping alg/hash initialization, no allocated channels
al_crypto 0000:00:04.1: crc/csum algorithms registered in /proc/crypto
al_crypto 0000:00:04.0: algorithms registered in /proc/crypto
al_crypto 0000:00:04.0: hash algorithms registered in /proc/crypto
al_crypto 0000:00:04.0: al_crypto_pci_probe: Skipping crc initialization, no allocated channels
Generic LED driver initialize
oprofile: using arm/armv7-ca15
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
8021q: 802.1Q VLAN Support v1.8
NET: Registered protocol family 37
VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
Registering SWP/SWPB emulation handler
Key type encrypted registered
rtc-ds1307 0-0068: setting system clock to 2024-06-22 16:13:27 UTC (1719072807)
Freeing unused kernel memory: 4760K (c06e5000 - c0b8b000)
INIT: version 2.88 booting

Booting Check Point RD-6281-A User Space...
Linux (none) 3.10.20-al-5.0-pr2 #1 SMP Mon Jun 6 17:04:00 IDT 2016 armv7l arm
Mounting 'tmpfs, proc and devpts'... Done
Attaching active partition 1
UBI: attaching mtd3 to ubi0
UBI: scanning is finished
UBI: attached mtd3 (name "ubifs", size 220 MiB) to ubi0
UBI: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
UBI: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
UBI: VID header offset: 4096 (aligned 4096), data offset: 8192
UBI: good PEBs: 880, bad PEBs: 0, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 3/0, WL threshold: 4096, image sequence number: 817566358
UBI: available PEBs: 0, total reserved PEBs: 880, PEBs reserved for bad PEB handling: 160
UBI: background thread "ubi_bgt0d" started, PID 832
UBI device number 0, total 880 LEBs (223477760 bytes, 213.1 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB)
UBI: attaching mtd10 to ubi3
UBI: scanning is finished
UBI: attached mtd10 (name "storage", size 350 MiB) to ubi3
UBI: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
UBI: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
UBI: VID header offset: 4096 (aligned 4096), data offset: 8192
UBI: good PEBs: 1402, bad PEBs: 0, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 310973247
UBI: available PEBs: 0, total reserved PEBs: 1402, PEBs reserved for bad PEB handling: 160
UBI: background thread "ubi_bgt3d" started, PID 841
UBI device number 3, total 1402 LEBs (356040704 bytes, 339.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB)
UBI: attaching mtd7 to ubi2
UBI: scanning is finished
UBI: attached mtd7 (name "logs", size 1024 MiB) to ubi2
UBI: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
UBI: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
UBI: VID header offset: 4096 (aligned 4096), data offset: 8192
UBI: good PEBs: 4096, bad PEBs: 0, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 138/96, WL threshold: 4096, image sequence number: 1755883130
UBI: available PEBs: 0, total reserved PEBs: 4096, PEBs reserved for bad PEB handling: 160
UBI: background thread "ubi_bgt2d" started, PID 850
UBI device number 2, total 4096 LEBs (1040187392 bytes, 992.0 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB)
UBIFS: background thread "ubifs_bgt2_0" started, PID 873
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 2, volume 0, name "logs"
UBIFS: LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
UBIFS: FS size: 994983936 bytes (948 MiB, 3918 LEBs), journal size 33521664 bytes (31 MiB, 132 LEBs)
UBIFS: reserved for root: 4952683 bytes (4836 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 0D9F12F2-B797-421D-B51A-4FB6F5E69AAC, small LPT model
UBIFS: background thread "ubifs_bgt3_0" started, PID 880
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 3, volume 0, name "storage"
UBIFS: LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
UBIFS: FS size: 311599104 bytes (297 MiB, 1227 LEBs), journal size 15491072 bytes (14 MiB, 61 LEBs)
UBIFS: reserved for root: 4952683 bytes (4836 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID C3D92905-442E-4CCB-84CC-1D367C9F95E0, small LPT model
INIT: Entering runlevel: 3
Entering Full multiuser mode..... ln: /sbin/lsmod: File exists
Brining up loopback interface... Done
Setting Hostname... Done
Active Partition is 1
UBIFS: background thread "ubifs_bgt0_0" started, PID 919
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "pfrm2.0"
UBIFS: LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
UBIFS: FS size: 179290112 bytes (170 MiB, 706 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 8B19CDE0-E2FA-4DA1-89AC-D7C3E535732E, small LPT model
Active Configuration Flag is 1
Creating /data/tmp if not there.
ls: /data/tmp: No such file or directory
USB Device Installation
expert mode Installation... Done

------------- This is a first boot ---------------

Executing platform initialization script
configured MAC to SGMII_2_5G mode:
eth [al_eth_2]: set link speed to 1000Mbps. full duplex.
al_eth 0000:00:02.0 eth2: using MSI-X per Queue interrupt mode
libphy: al mdio bus: probed
configured MAC to SGMII_2_5G mode:
eth [al_eth_0]: set link speed to 1000Mbps. full duplex.
al_eth 0000:00:00.0 eth0: using MSI-X per Queue interrupt mode
libphy: al mdio bus: probed
marvellmod: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
WAN: Link Down
NET: Registered protocol family 32
kernel UMI module loaded
Waiting for event dispatcher (1)...
x509Init : UDI-INFO : ProductID=, VendorID=, SerialNo=, DeviceId=, CN_WITH_UDI=
Installing new self signed certificates with 10 years validity...cp: cannot remove '/data/tmp/https.crt': No such file or directory
cp: cannot remove '/data/tmp/https.key': No such file or directory
Done
starting ntpd Daemon...Done
Creating devices for fan controlCreating devices for WPS push buton ... Done
Creating /dev/led3 device for Security LED... Done
Creating /dev/restore_default device... Done
Creating /dev/ppp device... Done
Disabling IP forwarding

======================
Starting Check Point Modules...
ln: /fwtmp/opt/fw1/nac/nac: File exists
ln: /flash/fw1/lib/cpsc.conf: File exists
Running Multi Portal Post Install script
Configuring Multiportal feature
ln: /opt/CPHotspotPortal/phpincs/logging/logging: File exists
ln: /opt/CPHotspotPortal/phpincs/util/exception/exception: File exists
ln: /opt/CPHotspotPortal/htdocs/hotspot/js/Blob.js: File exists
ln: /opt/CPHotspotPortal/htdocs/hotspot/images/images: File exists
ln: /opt/CPHotspotPortal/htdocs/hotspot/img/img: File exists
Inserting SXL module...
SIM: Linux kernel version 3.10.20 ()
Sim: driver installed
Done.
Inserting fw1 module...
[fw4_0];FW-1: Linux kernel version 2.6.32--1
[fw4_0];FW-1: driver installed
[fw4_0];FW-1: Linux kernel version 2.6.32--1
[fw4_1];FW-1: driver installed
[fw4_0];FW-1: Linux kernel version 2.6.32--1
[fw4_2];FW-1: driver installed
[fw4_0];FW-1: Linux kernel version 2.6.32--1
[fw4_3];FW-1: driver installed
done
Inserting VPN module...
VPN-1: driver installed
VPN-1: driver installed
VPN-1: driver installed
VPN-1: driver installed
done
Inserting VPNT module...
VPNT: IPv4 over VPN Tunnel driver installed
done
Inserting FG-1 module...
0
FG-1: driver installed
FG-1: driver installed
FG-1: driver installed
FG-1: driver installed
Done.
Fetching default filter...

Installing Security Policy...
 hostaddr(RD6281) failed: Connec[fw4_0];FW-1: ld_commit: Attempting to commit unbound or invalid ld 8115
tion refused
[fw4_1];FW-1: ld_commit: Attempting to commit unbound or invalid ld 8115
[fw4_2];FW-1: ld_commit: Attempting to commit unbound or invalid ld 8115
[fw4_3];FW-1: ld_commit: Attempting to commit unbound or invalid ld 8115

Installing Security Policy Succeeded.
Done.
Initializing Internal Certificate Authority...
 Creating Internal CA with default DN 'O=00:1C:7F:73:8D:3D..bk4jur'
 Valid until 2038
 Internal Certificate Authority created successfully
 Generating public key...
 PutPKIsignkey: nickname for cert is missing. dn will be used for cert's name
 Successfully enrolled for certificate
/opt/fw1/bin/ica_init.sh: line 40:  2125 Killed                  $FWDIR/bin/cpca
ICA and VPN Certificate were created successfully.

clear_ica_db: Failed to remove default certificate from database
clear_ica_db: Failed to remove Internal CA from database
ica_init_ica_cert: Updated database with Internal CA info
ica_init_vpn_cert: Updated database with VPN certificate info
Check Point Modules started...
=====================

Done cpInit

Saving interface info ... Done saving interfaces information.
refresh timezone
running checkRestartThttpd.sh...
running sshd...
thttpd is not running. Restarting it now.
Setting hostname to Factory Default configuration...
Host Name : Gateway-ID-7F738D3D
Setting product info...
Reading default MAC addresses...
expr: syntax error
Loading Factory Defaults ModulessetInterruptANP irq: 386
Inserting more default values to database...
Import tables from file
Importing...
no LUA variable:gaia_keyvals
Imported successfully!
mknod: /dev/swmisc: File exists
stub function bspPciFindDevReset returning MV_NOT_SUPPORTED

presteraSmi_init: Init OK!
stub function bspVirt2Phys returning MV_NOT_SUPPORTED
DMA - dma_area:   (null)(v) ,dma_base: 0x10(p), dma_len: 0x200000
test_prestera: not testing prestera
 cpwd_admin: Failed to submit request to cpWatchDog
cpwd (2558): /proc/2558/oom_adj is deprecated, please use /proc/2558/oom_score_adj instead.
 cpwd_admin: cpWatchDog is running
CPWD started...
cpwd_admin:
Process cposd started successfully (pid=2569)
Starting daemon: rtdbdcpwd_admin:
Process RTDB started successfully (pid=2580)
remap_pfn_range(phys=0x10, PAGE_SHIFT=c, 0x19000000, 0x0, 0x200000, 0x743)
stub function bspPciGetIntVec returning MV_NOT_SUPPORTED
error in line 688 IOCTL: FAULT
stub function bspPciGetIntVec returning MV_NOT_SUPPORTED
error in line 688 IOCTL: FAULT
/pfrm2.0/bin/lua: /usr/local/share/lua/5.1/sys/OSTLORM.lua:0: Failed to connect
stack traceback:
        [C]: in function 'assert'
        /usr/local/share/lua/5.1/sys/OSTLORM.lua: in function 'initialise'
        /usr/local/share/lua/5.1/sys/OSTLORM.lua: in function ''
        /usr/local/share/lua/5.1/sys/OSTLORM.lua: in function 'get'
        /usr/local/share/lua/5.1/sys/ostl/internetConnection.lua: in function 'get_records'
        /usr/local/share/lua/5.1/sys/OSTLORM.lua: in function 'get'
        /usr/local/share/lua/5.1/sys/ORM.lua: in function 'get'
        /usr/local/share/lua/5.1/sys/model.lua: in function ''
        /usr/local/share/lua/5.1/sys/model.lua: in function 'findAll'
        /usr/local/share/lua/5.1/sys/utils/modelHelper.lua: in function 'getNextSuffix'
        /usr/local/share/lua/5.1/app/model/internetConnection.lua: in function ''
        ...
        /usr/local/share/lua/5.1/sys/LCM.lua: in function 'getModel'
        /usr/local/share/lua/5.1/app/model/systemSettings.lua: in function ''
        /usr/local/share/lua/5.1/app/model/systemSettings.lua: in main chunk
        /usr/local/share/lua/5.1/sys/model.lua: in function 'callbacks'
        /usr/local/share/lua/5.1/sys/model.lua: in function 'first'
        /usr/local/share/lua/5.1/teamf1lualib/sfwUtils.lua: in function 'getLanPortNum'
        /usr/local/share/lua/5.1/clinv.lua: in main chunk
        [C]: in function 'require'
        /pfrm2.0/bin/reconfPAM:5: in main chunk
        [C]: at 0x0000bc89
Starting Firewall Components...

=======================
Starting Check Point products...
[fw4_0];FW-1: Warning: No valid license
[fw4_1];FW-1: Warning: No valid license
[fw4_2];FW-1: Warning: No valid license
[fw4_3];FW-1: Warning: No valid license
Starting VPN
VPN-1 is enabling AES-NI for SIM
sim_aesni_enable: Enabled AES-NI, but machine does not have this feature

VPN-1: AES-NI is allowed on this machine. Testing hardware support
VPN-1: AES-NI is not supported on this hardware
VPN-1: Cryptographic algorithm tests passed successfully
[fw4_0];VPN-1: connected to FW-1
VPN-1 IPv4 InstaVPN-1: AES-NI is allowed on this machine. Testing hardware supportnce 0 is started

VPN-1: AES-NI is not supported on this hardware
VPN-1: Cryptographic algorithm tests passed successfully
[fw4_1];VPN-1: connected to FW-1
VPN-1 IPv4 InstaVPN-1: AES-NI is allowed on this machine. Testing hardware supportnce 1 is started

VPN-1: AES-NI is not supported on this hardware
VPN-1: Cryptographic algorithm tests passed successfully
[fw4_2];VPN-1: connected to FW-1
VPN-1 IPv4 InstaVPN-1: AES-NI is allowed on this machine. Testing hardware supportnce 2 is started

VPN-1: AES-NI is not supported on this hardware
VPN-1: Cryptographic algorithm tests passed successfully
[fw4_3];VPN-1: connected to FW-1
VPN-1 IPv4 Instance 3 is started
/pfrm2.0/bin/lua: /usr/local/share/lua/5.1/sys/OSTLORM.lua:0: Failed to connect
stack traceback:
        [C]: in function 'assert'
        /usr/local/share/lua/5.1/sys/OSTLORM.lua: in function 'initialise'
        /usr/local/share/lua/5.1/sys/OSTLORM.lua: in function ''
        /usr/local/share/lua/5.1/sys/OSTLORM.lua: in function 'get'
        /usr/local/share/lua/5.1/sys/ostl/internetConnection.lua: in function 'get_records'
        /usr/local/share/lua/5.1/sys/OSTLORM.lua: in function 'get'
        /usr/local/share/lua/5.1/sys/ORM.lua: in function 'get'
        /usr/local/share/lua/5.1/sys/model.lua: in function ''
        /usr/local/share/lua/5.1/sys/model.lua: in function 'findAll'
        /usr/local/share/lua/5.1/sys/utils/modelHelper.lua: in function 'getNextSuffix'
        /usr/local/share/lua/5.1/app/model/internetConnection.lua: in function ''
        ...
        /usr/local/share/lua/5.1/sys/LCM.lua: in function 'getModel'
        /usr/local/share/lua/5.1/app/model/systemSettings.lua: in function ''
        /usr/local/share/lua/5.1/app/model/systemSettings.lua: in main chunk
        /usr/local/share/lua/5.1/sys/model.lua: in function 'callbacks'
        /usr/local/share/lua/5.1/sys/model.lua: in function 'first'
        /usr/local/share/lua/5.1/teamf1lualib/sfwUtils.lua: in function 'getLanPortNum'
        /usr/local/share/lua/5.1/clinv.lua: in main chunk
        [C]: in function 'require'
        /pfrm2.0/bin/reconfPAM:5: in main chunk
        [C]: at 0x0000bc89
/pfrm2.0/bin/lua: /usr/local/share/lua/5.1/sys/OSTLORM.lua:0: Failed to connect
stack traceback:
        [C]: in function 'assert'
        /usr/local/share/lua/5.1/sys/OSTLORM.lua: in function 'initialise'
        /usr/local/share/lua/5.1/sys/OSTLORM.lua: in function ''
        /usr/local/share/lua/5.1/sys/OSTLORM.lua: in function 'get'
        /usr/local/share/lua/5.1/sys/ostl/internetConnection.lua: in function 'get_records'
        /usr/local/share/lua/5.1/sys/OSTLORM.lua: in function 'get'
        /usr/local/share/lua/5.1/sys/ORM.lua: in function 'get'
        /usr/local/share/lua/5.1/sys/model.lua: in function ''
        /usr/local/share/lua/5.1/sys/model.lua: in function 'findAll'
        /usr/local/share/lua/5.1/sys/utils/modelHelper.lua: in function 'getNextSuffix'
        /usr/local/share/lua/5.1/app/model/internetConnection.lua: in function ''
        ...
        /usr/local/share/lua/5.1/sys/LCM.lua: in function 'getModel'
        /usr/local/share/lua/5.1/app/model/systemSettings.lua: in function ''
        /usr/local/share/lua/5.1/app/model/systemSettings.lua: in main chunk
        /usr/local/share/lua/5.1/sys/model.lua: in function 'callbacks'
        /usr/local/share/lua/5.1/sys/model.lua: in function 'first'
        /usr/local/share/lua/5.1/teamf1lualib/sfwUtils.lua: in function 'getLanPortNum'
        /usr/local/share/lua/5.1/clinv.lua: in main chunk
        [C]: in function 'require'
        /pfrm2.0/bin/reconfPAM:5: in main chunk
        [C]: at 0x0000bc89
 fw_ipaddr_both: Unable to resolve ipaddr for Gateway-ID-7F738D3D
 fw_ismyip: fw_ipaddrs() failed
Updating port database...
ksw_mrv_dev_do_ioctl(809)
Ports vlan
num     |VID    |port_state     |
--------------------------------------------

Vlan port Mask
VID     |Port mask      |
-----------------------

g_port_vlan_exist=0
MRVDRIVER: sw_setvlan num_of_ports(16) is different than installed(0)
ksw_mrv_dev_do_ioctl(811)
Ports vlan
num     |VID    |port_state     |
--------------------------------------------
1       |1      |Auto learning(default) |
2       |1      |Auto learning(default) |
3       |1      |Auto learning(default) |
4       |1      |Auto learning(default) |
5       |1      |Auto learning(default) |
6       |1      |Auto learning(default) |
7       |1      |Auto learning(default) |
8       |1      |Auto learning(default) |
9       |1      |Auto learning(default) |
10      |1      |Auto learning(default) |
11      |1      |Auto learning(default) |
12      |1      |Auto learning(default) |
13      |1      |Auto learning(default) |
14      |1      |Auto learning(default) |
15      |1      |Auto learning(default) |
16      |1      |Auto learning(default) |

Vlan port Mask
VID     |Port mask      |
-----------------------
1       |0xffff |

g_port_vlan_exist=1
Updating vid 1 link status
LAN1: Link Down
configured MAC to RGMII mode:
al_eth 0000:00:01.0 DMZ: using MSI-X per Queue interrupt mode
libphy: al mdio bus: probed
al_eth 0000:00:01.0 DMZ: phy[1]: device 8:01, driver Marvell 88E1514
al_eth 0000:00:01.0 DMZ: phy[1]:supported 2ff adv 2ff
al_eth 0000:00:01.0 DMZ: al_eth_down
[eth rx] warn: dma state didn't change to Disable
[eth rx] warn: failed to change state, error -110
New timeout is 12IPC started...
No local policy
defaultfilter detected - reverting to OutgoingPolicy.
Local policy not installed.
Loading Outgoing policy

Installing Security Policy...

Installing Security Policy Succeeded.
Done.
Initial policy loaded successfully.
Starting acceleration
SecureXL will be started after a policy is loaded.
cpwd_admin:
Process SFWD started successfully (pid=3359)
Enabling IP forwarding
Configuring Hotspot settings...
Configuring routing...
Configuring netflow...
Check Point products started
===================

Initializing MultiQ...
Done.

------------- First boot done ---------------


System Started...
Running predefined CLI commands
Generating key, this may take a while...
Appliance was not configured yet - Checking Zero Touch service...

Gateway-ID-7F738D3D login: Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDa3fJxZZZvEfud4wphFtqWzMHvwZ/PT/E++rkrsDkkJYA0S4PqjS9MN3GjOzcyVNYpUc2rRyG6X+xhSh+W8ApGeI3Jhzib31zH36l5u55fG7sq/1VpaiRPt5V8k09jgJcKNmC1SVUFpIW3R5+gyZKVZVgTy/I++Q7251ELkKfIu4frW/L+Yc1Z3Yb/i0SZTKsehnsws33c/GUTKYQDBYNnLX3k+Ryfwt9PG90iQsVS6G8YVqcNZyWtzfXYuInTlGYfQUFlBwtOM7gd6/4pelro1UysDkXm5YDETZsl2wNAYCmrZi5eTppz1+H0hqGamIYHm2VDS7zkoNdiGAuzyHr/ root@Gateway-ID-7F738D3D
Fingerprint: md5 24:cf:11:eb:89:1f:37:a3:3c:f0:86:fa:d0:af:68:44

Gateway-ID-7F738D3D login: admin
Password:
> Welcome to CLISH. The First Time Configuration wizard was not completed yet
> NOTE: The First Time Configuration wizard may delete or override some of the settings you set in CLISH
> To disable the First Time Configuration wizard (and USB automatic configuration) please run "set property first-time-wizard off"
Gateway-ID-7F738D3D>

edit: maintence mode 

U-Boot 2015.01-alpine_db_s2-1.65.1-HAL (Apr 03 2016 - 12:29:23)  Check Point version: 75

I2C:   ready
DRAM:  2 GiB



   ______  __                    __        _______           _            _
 .' ___  |[  |                  [  |  _   |_   __ \         (_)          / |_
/ .'   \_| | |--.  .---.  .---.  | | / ]    | |__) | .--.   __   _ .--. `| |-'
| |        | .-. |/ /__\\/ /'`\] | '' <     |  ___// .'`\ \[  | [ `.-. | | |
\ `.___.'\ | | | || \__.,| \__.  | |`\ \   _| |_   | \__. | | |  | | | | | |,
 `.____ .'[___]|__]'.__.''.___.'[__|  \_] |_____|   '.__.' [___][___||__]\__/


power_init_board: EEPROM per device information - using defaults!
Board config ID: alpine_db (S2-L72)
NAND:  2048 MiB
  00:00.0     - 1c36:0002 - Network controller
  00:01.0     - 1c36:0001 - Network controller
  00:02.0     - 1c36:0002 - Network controller
  00:03.0     - 1c36:0001 - Network controller
  00:04.0     - 1c36:0011 - Cryptographic device
  00:05.0     - 1c36:0021 - Base system peripheral
pci_init_board_external: PCIE_0 no link found
pci_init_board_external: PCIE_1 no link found
PCIE_2: Link up. Speed 5GT/s Width x1
  01:00.0     - 1912:0014 - Serial bus controller
In:    serial
Out:   serial
Err:   serial
Net:   al_eth0, al_eth1 [PRIME], al_eth2, al_eth3
Trying to read nand: 262144 bytes from offset 3145728
ecc_read_page: corrected increased to 1
Read nand: 262144 bytes from nand
blob magic: a5a51234
blob crc: 99173cd3
Verifying CRC for settings area... Done

************ Hit 'Ctrl + C' for boot menu ************

Setting bootaddr to 0x8000200
Enabling network ports...
Done.


Welcome to Gaia Embedded Boot Menu :

        1. Start in normal Mode
        2. Start in debug Mode
        3. Start in maintenance Mode
        4. Restore to Factory Defaults (local)
        5. Install/Update Image from Network
        6. Restart Boot-Loader
        7. Run Hardware diagnostics
        8. Upload preset configuration file

        Please enter your selection (press ENTER to finish) :3

Going to boot from local image (Maintenance Mode)...

Trying to read nand: 262144 bytes from offset 3145728
ecc_read_page: corrected increased to 2
Read nand: 262144 bytes from nand
blob magic: a5a51234
blob crc: 99173cd3
Verifying CRC for settings area... Done
Erasing NAND...
Erasing at 0x280000 -- 100% complete.
Writing to NAND... OK
Saving Environment to NAND...
Erasing redundant NAND...
Erasing at 0x2c0000 -- 100% complete.
Writing to redundant NAND... OK
bootargs=boardFlavor=alpine_db_s2 maintenance console=ttyS0,115200 noExtPorts= cp_net_config=3,(00:1C:7F:73:8D:3                D)(00:1C:7F:73:8D:3E)(00:1C:7F:73:8D:3F) uboot_ver=75 pci=pcie_bus_perf
device 0 offset 0x380000, size 0x7fc80000
do_nand: set partition base address to=380000

NAND read: device 0 offset 0x380000, size 0x1000000
ecc_read_page: corrected increased to 3
ecc_read_page: corrected increased to 4
ecc_read_page: corrected increased to 5
ecc_read_page: corrected increased to 6
 16777216 bytes read: OK
## Booting kernel from Legacy Image at 08001000 ...
   Image Name:   Linux-3.10.20-al-5.0-pr2
   Created:      2016-06-06  14:04:32 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    8507192 Bytes = 8.1 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 03b2c008
   Booting using the fdt blob at 0x3b2c008
   Loading Kernel Image ... OK
   reserving fdt memory region: addr=0 size=100000
   Loading Device Tree to 03b10000, end 03b17bd1 ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.10.20-al-5.0-pr2 (builder@Lnx50BccCmp8.checkpoint.com) (gcc version 4.7.3 20130328 (prerelease)                 (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jun 6 17:04:00 IDT 2016
CPU: ARMv7 Processor [412fc0f4] revision 4 (ARMv7), cr=30c7387d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine: AnnapurnaLabs Alpine (Device Tree), model: Annapurna Labs Alpine Dev Board
Memory policy: ECC disabled, Data cache writealloc
PERCPU: Embedded 9 pages/cpu @c1c57000 s12800 r8192 d15872 u36864
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522768
Kernel command line: boardFlavor=alpine_db_s2 maintenance console=ttyS0,115200 noExtPorts= cp_net_config=3,(00:1                C:7F:73:8D:3D)(00:1C:7F:73:8D:3E)(00:1C:7F:73:8D:3F) uboot_ver=75 pci=pcie_bus_perf
Board type ID: 2
U-boot version: 75
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2048MB = 2048MB total
Memory: 2067152k/2067152k available, 30000k reserved, 1318912K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xb0000000 - 0xbfe00000   ( 254 MB)
      .text : 0xc0008000 - 0xc06e4530   (7026 kB)
      .init : 0xc06e5000 - 0xc0b8b200   (4761 kB)
      .data : 0xc0b8c000 - 0xc0bdc990   ( 323 kB)
       .bss : 0xc0bdc990 - 0xc0c40f5c   ( 402 kB)
Hierarchical RCU implementation.
NR_IRQS:16 nr_irqs:16 16
Architected local timer running at 50.00MHz (phys).
Switching to timer-based delay loop
sched_clock: ARM arch timer >56 bits at 50000kHz, resolution 20ns
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
CPU speed: 1.7GHz
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0xc0021310 - 0xc0021368
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: Booted secondary processor
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: Booted secondary processor
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Brought up 4 CPUs
SMP: Total of 4 processors activated.
CPU: All CPU(s) started in HYP mode.
CPU: Virtualization extensions available.
devtmpfs: initialized
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
Initializing System Fabric
Enabling IO Cache Coherency.
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
Serial: AMBA PL011 UART driver
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pcf857x 0-0020: probed
pcf857x 0-0021: probed
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Switching to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
kvm [1]: gic_main@fb004000 IRQ25
kvm [1]: arch-timer IRQ27
kvm [1]: Hyp mode initialized successfully
hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
al-pcie pcie-internal.3: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfeffffff]
pci_bus 0000:00: root bus resource [bus 00]
pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
pci 0000:00:00.0: PCI-E Max Payload Size set to  128/ 256 (was  128), Max Read Rq  128
pci 0000:00:01.0: PCI-E Max Payload Size set to  128/ 256 (was  128), Max Read Rq  128
pci 0000:00:02.0: PCI-E Max Payload Size set to  128/ 256 (was  128), Max Read Rq  128
pci 0000:00:03.0: PCI-E Max Payload Size set to  128/ 256 (was  128), Max Read Rq  128
pci 0000:00:04.0: PCI-E Max Payload Size set to  128/ 256 (was  128), Max Read Rq  128
pci 0000:00:05.0: PCI-E Max Payload Size set to  128/ 256 (was  128), Max Read Rq  128
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 0: assigned [mem 0xfe000000-0xfe01ffff 64bit]
pci 0000:00:00.0: BAR 7: assigned [mem 0xfe020000-0xfe07ffff 64bit]
pci 0000:00:01.0: BAR 0: assigned [mem 0xfe080000-0xfe09ffff 64bit]
pci 0000:00:02.0: BAR 0: assigned [mem 0xfe0a0000-0xfe0bffff 64bit]
pci 0000:00:02.0: BAR 7: assigned [mem 0xfe0c0000-0xfe11ffff 64bit]
pci 0000:00:03.0: BAR 0: assigned [mem 0xfe120000-0xfe13ffff 64bit]
pci 0000:00:04.0: BAR 0: assigned [mem 0xfe140000-0xfe15ffff 64bit]
pci 0000:00:04.0: BAR 7: assigned [mem 0xfe160000-0xfe17ffff 64bit]
pci 0000:00:05.0: BAR 0: assigned [mem 0xfe180000-0xfe19ffff 64bit]
pci 0000:00:05.0: BAR 7: assigned [mem 0xfe1a0000-0xfe1bffff 64bit]
pci 0000:00:00.0: BAR 4: assigned [mem 0xfe1c0000-0xfe1c3fff 64bit]
pci 0000:00:01.0: BAR 4: assigned [mem 0xfe1c4000-0xfe1c7fff 64bit]
pci 0000:00:02.0: BAR 4: assigned [mem 0xfe1c8000-0xfe1cbfff 64bit]
pci 0000:00:03.0: BAR 4: assigned [mem 0xfe1cc000-0xfe1cffff 64bit]
pci 0000:00:04.0: BAR 4: assigned [mem 0xfe1d0000-0xfe1d1fff 64bit]
pci 0000:00:05.0: BAR 4: assigned [mem 0xfe1d2000-0xfe1d3fff 64bit]
pci 0000:00:00.0: BAR 2: assigned [mem 0xfe1d4000-0xfe1d4fff 64bit]
pci 0000:00:01.0: BAR 2: assigned [mem 0xfe1d5000-0xfe1d5fff 64bit]
pci 0000:00:02.0: BAR 2: assigned [mem 0xfe1d6000-0xfe1d6fff 64bit]
pci 0000:00:03.0: BAR 2: assigned [mem 0xfe1d7000-0xfe1d7fff 64bit]
PCIe 1: Link up. speed gen2 negotiated width 1
al-pcie fd840000.pcie-external2: link up: speed Gen 2 width x1
al-pcie fd840000.pcie-external2: al_pcie_probe: [pcie 1] use DMA for read from f0000000 to f7ffffff
al-pcie fd840000.pcie-external2: al_pcie_probe: [pcie 1] use DMA for write from f0000000 to f000ffff
Configuring PCIE for IOCC
PCIE_1: snoop mode enable
al-pcie fd840000.pcie-external2: PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [io  0x30000-0x3ffff]
pci_bus 0001:00: root bus resource [mem 0xf0010000-0xf7ffffff]
pci_bus 0001:00: root bus resource [bus 00-ff]
pci 0001:00:00.0: PCI-E Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256
PCI: bus0: Fast back to back transfers disabled
pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0001:01:00.0: PCI-E Max Payload Size set to  128/ 128 (was  128), Max Read Rq  128
PCI: bus1: Fast back to back transfers disabled
pci 0001:00:00.0: BAR 14: assigned [mem 0xf0100000-0xf01fffff]
pci 0001:00:00.0: BAR 0: assigned [mem 0xf0010000-0xf0010fff]
pci 0001:00:00.0: BAR 1: assigned [mem 0xf0011000-0xf0011fff pref]
pci 0001:01:00.0: BAR 0: assigned [mem 0xf0100000-0xf0101fff 64bit]
pci 0001:00:00.0: PCI bridge to [bus 01]
pci 0001:00:00.0:   bridge window [mem 0xf0100000-0xf01fffff]
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 1461
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
########  init_hwwatchdog_sysfs error is 0, if OK, configuraing wdt sysfs and checking if wdt thread is needed
al_dma: Annapurna Labs DMA Driver 0.01
PCI: enabling device 0000:00:05.0 (0000 -> 0002)
pci 0000:00:05.1: PCI-E Max Payload Size set to  128/ 128 (was  128), Max Read Rq  128
PCI: enabling device 0000:00:05.1 (0400 -> 0402)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
fd883000.uart0: ttyS0 at MMIO 0xfd883000 (irq = 49) is a 16550A
console [ttyS0] enabled
fd884000.uart1: ttyS1 at MMIO 0xfd884000 (irq = 50) is a 16550A
fd885000.uart2: ttyS2 at MMIO 0xfd885000 (irq = 51) is a 16550A
CP LED driver initialize
brd: module loaded
loop: module loaded
al_nand_probe: AnnapurnaLabs nand driver
ONFI param page 0 valid
ONFI flash detected
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xa5 (Micron MT29F16G08ADBCAH4), 2048MiB, page size: 4096, OOB size                : 224
Scanning device for bad blocks
11 ofpart partitions found on MTD device Alpine nand flash
Creating 11 MTD partitions on "Alpine nand flash":
0x000000000000-0x000000300000 : "al_boot"
0x000000200000-0x000000300000 : "device_tree"
0x000000380000-0x000001380000 : "linux_kernel"
0x000001380000-0x00000ef80000 : "ubifs"
0x00000ef80000-0x00000ff80000 : "linux_kernel2"
0x00000ff80000-0x00001db80000 : "ubifs-2"
0x00001db80000-0x000029f80000 : "default-sw"
0x000029f80000-0x000069f80000 : "logs"
0x000069f80000-0x00006a080000 : "preset"
0x00006a080000-0x00006a180000 : "adsl"
0x00006a180000-0x000080000000 : "storage"
dw_spi_mmio fd882000.spi: master is unqueued, this is deprecated
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
al_eth_drv: AnnapurnaLabs unified 1GbE and 10GbE Ethernet Driver al_eth v0.2 (Feb 18, 2013)
al_eth 0000:00:00.0: Board info: phy exist No. phy addr 0. mdio freq 2500 Khz. SFP connected No. media 6
cp_gtw_parse_net_config=3,(00:1C:7F:73:8D:3D)(00:1C:7F:73:8D:3E)(00:1C:7F:73:8D:3F)number of interfaces in comma                nd line is 3
      o Using default MTU 1500
al_eth 0000:00:00.0 eth0: AnnapurnaLabs unified 1Gbe/10Gbe found at mem fe000000, mac addr 00:1c:7f:73:8d:3e
al_eth 0000:00:01.0: Board info: phy exist Yes. phy addr 1. mdio freq 1000 Khz. SFP connected No. media 1
al_eth 0000:00:01.0 eth1: AnnapurnaLabs unified 1Gbe/10Gbe found at mem fe080000, mac addr 00:1c:7f:73:8d:3f
al_eth 0000:00:02.0: Board info: phy exist No. phy addr 0. mdio freq 2500 Khz. SFP connected No. media 6
al_eth 0000:00:02.0 eth2: AnnapurnaLabs unified 1Gbe/10Gbe found at mem fe0a0000, mac addr 00:1c:7f:73:8d:3d
al_eth 0000:00:03.0: Board info: phy exist No. phy addr 0. mdio freq 2500 Khz. SFP connected No. media 1
al_eth 0000:00:03.0 eth3: AnnapurnaLabs unified 1Gbe/10Gbe found at mem fe120000, mac addr de:3c:9f:fd:4f:9c
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbcore: registered new interface driver cdc_ether
GobiNet: 2013-10-08/NTGR_2.21
usbcore: registered new interface driver GobiNet
usbcore: registered new interface driver sierra_net
PCI: enabling device 0001:01:00.0 (0140 -> 0142)
xhci_hcd 0001:01:00.0: xHCI Host Controller
xhci_hcd 0001:01:00.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
xhci_hcd 0001:01:00.0: xHCI Host Controller
xhci_hcd 0001:01:00.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver aircable
usbserial: USB Serial support registered for aircable
usbcore: registered new interface driver belkin_sa
usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
usbcore: registered new interface driver usb_debug
usbserial: USB Serial support registered for debug
usbcore: registered new interface driver omninet
usbserial: USB Serial support registered for ZyXEL - omni.net lcd plus usb
usbcore: registered new interface driver option
usbserial: USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver pl2303
usbserial: USB Serial support registered for pl2303
usbcore: registered new interface driver qcserial
usbserial: USB Serial support registered for Qualcomm USB modem
usbcore: registered new interface driver sierra
usbserial: USB Serial support registered for Sierra USB modem
usbcore: registered new interface driver GobiSerial
usbserial: USB Serial support registered for GobiSerial
GobiSerial: 2013-10-08/NTGR_2.12:GobiSerial
usbcore: registered new interface driver zte_ev
usbserial: USB Serial support registered for zte_ev
mousedev: PS/2 mouse device common for all mice
rtc-ds1307 0-0068: rtc core: registered ds1337 as rtc0
i2c /dev entries driver
nct7802: sensors_nct7802_init
nct7802: snct7802_probe
nct7802: snct7802_probe
i2c i2c-0: Invalid probe address 0xac54
al_thermal_probe: Thermal Sensor Loaded at: 0xf0176a00.
al_mc_edac fb080000.mc: No ECC present, or ECC disabled
cpuidle: using governor ladder
cpuidle: using governor menu
al_crypto: Annapurna Labs Crypto Driver 0.01
PCI: enabling device 0000:00:04.0 (0000 -> 0002)
pci 0000:00:04.1: PCI-E Max Payload Size set to  128/ 128 (was  128), Max Read Rq  128
PCI: enabling device 0000:00:04.1 (0400 -> 0402)
al_crypto 0000:00:04.1: al_crypto_pci_probe: Skipping alg/hash initialization, no allocated channels
al_crypto 0000:00:04.1: crc/csum algorithms registered in /proc/crypto
al_crypto 0000:00:04.0: algorithms registered in /proc/crypto
al_crypto 0000:00:04.0: hash algorithms registered in /proc/crypto
al_crypto 0000:00:04.0: al_crypto_pci_probe: Skipping crc initialization, no allocated channels
Generic LED driver initialize
oprofile: using arm/armv7-ca15
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
8021q: 802.1Q VLAN Support v1.8
NET: Registered protocol family 37
VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
Registering SWP/SWPB emulation handler
Key type encrypted registered
rtc-ds1307 0-0068: setting system clock to 2024-06-22 16:36:11 UTC (1719074171)
Freeing unused kernel memory: 4760K (c06e5000 - c0b8b000)
INIT: version 2.88 booting

Booting Check Point RD-6281-A User Space...
Linux (none) 3.10.20-al-5.0-pr2 #1 SMP Mon Jun 6 17:04:00 IDT 2016 armv7l arm
Mounting 'tmpfs, proc and devpts'... Done
Attaching active partition 1
UBI: attaching mtd3 to ubi0
UBI: scanning is finished
UBI: attached mtd3 (name "ubifs", size 220 MiB) to ubi0
UBI: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
UBI: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
UBI: VID header offset: 4096 (aligned 4096), data offset: 8192
UBI: good PEBs: 880, bad PEBs: 0, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 817566358
UBI: available PEBs: 0, total reserved PEBs: 880, PEBs reserved for bad PEB handling: 160
UBI: background thread "ubi_bgt0d" started, PID 832
UBI device number 0, total 880 LEBs (223477760 bytes, 213.1 MiB), available 0 LEBs (0 bytes), LEB size 253952 by                tes (248.0 KiB)
UBI: attaching mtd10 to ubi3
UBI: scanning is finished
UBI: attached mtd10 (name "storage", size 350 MiB) to ubi3
UBI: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
UBI: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
UBI: VID header offset: 4096 (aligned 4096), data offset: 8192
UBI: good PEBs: 1402, bad PEBs: 0, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 310973247
UBI: available PEBs: 0, total reserved PEBs: 1402, PEBs reserved for bad PEB handling: 160
UBI: background thread "ubi_bgt3d" started, PID 841
UBI device number 3, total 1402 LEBs (356040704 bytes, 339.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 b                ytes (248.0 KiB)
UBI: attaching mtd7 to ubi2
UBI: scanning is finished
UBI: attached mtd7 (name "logs", size 1024 MiB) to ubi2
UBI: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
UBI: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
UBI: VID header offset: 4096 (aligned 4096), data offset: 8192
UBI: good PEBs: 4096, bad PEBs: 0, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 138/96, WL threshold: 4096, image sequence number: 1755883130
UBI: available PEBs: 0, total reserved PEBs: 4096, PEBs reserved for bad PEB handling: 160
UBI: background thread "ubi_bgt2d" started, PID 850
UBI device number 2, total 4096 LEBs (1040187392 bytes, 992.0 MiB), available 0 LEBs (0 bytes), LEB size 253952                 bytes (248.0 KiB)
UBIFS: background thread "ubifs_bgt2_0" started, PID 873
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 2, volume 0, name "logs"
UBIFS: LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
UBIFS: FS size: 994983936 bytes (948 MiB, 3918 LEBs), journal size 33521664 bytes (31 MiB, 132 LEBs)
UBIFS: reserved for root: 4952683 bytes (4836 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 0D9F12F2-B797-421D-B51A-4FB6F5E69AAC, small LPT model
UBIFS: background thread "ubifs_bgt3_0" started, PID 880
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 3, volume 0, name "storage"
UBIFS: LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
UBIFS: FS size: 311599104 bytes (297 MiB, 1227 LEBs), journal size 15491072 bytes (14 MiB, 61 LEBs)
UBIFS: reserved for root: 4952683 bytes (4836 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID C3D92905-442E-4CCB-84CC-1D367C9F95E0, small LPT model
INIT: Entering runlevel: 3
Entering Full multiuser mode..... ln: /sbin/lsmod: File exists
Brining up loopback interface... Done
Setting Hostname... Done
Active Partition is 1
UBIFS: background thread "ubifs_bgt0_0" started, PID 919
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "pfrm2.0"
UBIFS: LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
UBIFS: FS size: 179290112 bytes (170 MiB, 706 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 8B19CDE0-E2FA-4DA1-89AC-D7C3E535732E, small LPT model
Active Configuration Flag is 1
Creating /data/tmp if not there.
https.crt  https.key
USB Device Installation
expert mode Installation... Done
Maintenance mode detected

System Started...
Going into maintenance mode


This is the first time you enter the expert mode.
Expert password must be changed.

Enter new expert password:
Illegal password choice: it is too short, try again.
Enter new expert password:
Illegal password choice: it is too short, try again.
Enter new expert password:
Enter new expert password (again):
[Expert@MAINTENANCE_MODE]# free
              total         used         free       shared      buffers
  Mem:      2071912        47856      2024056            0            0
 Swap:            0            0            0
Total:      2071912        47856      2024056
[Expert@MAINTENANCE_MODE]# cat /proc/cpuinfo
processor       : 0
model name      : ARMv7 Processor rev 4 (v7l)
Speed           : 1.7GHz
Features        : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x2
CPU part        : 0xc0f
CPU revision    : 4

processor       : 1
model name      : ARMv7 Processor rev 4 (v7l)
Speed           : 1.7GHz
Features        : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x2
CPU part        : 0xc0f
CPU revision    : 4

processor       : 2
model name      : ARMv7 Processor rev 4 (v7l)
Speed           : 1.7GHz
Features        : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x2
CPU part        : 0xc0f
CPU revision    : 4

processor       : 3
model name      : ARMv7 Processor rev 4 (v7l)
Speed           : 1.7GHz
Features        : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x2
CPU part        : 0xc0f
CPU revision    : 4

Hardware        : AnnapurnaLabs Alpine (Device Tree)
Revision        : 0000
Serial          : 0000000000000000
[Expert@MAINTENANCE_MODE]#  cat/mtd_info
bash: cat/mtd_info: No such file or directory
[Expert@MAINTENANCE_MODE]# cat /mtd
cat: can't open '/mtd': No such file or directory
[Expert@MAINTENANCE_MODE]# df -h
Filesystem                Size      Used Available Use% Mounted on
tmpfs                    20.0M      4.0k     20.0M   0% /tmp
tmpfs                    40.0M      4.0k     40.0M   0% /fwtmp
ubi2_0                  890.9M     40.0k    886.1M   0% /logs
ubi3_0                  278.1M      8.0M    265.3M   3% /storage
ubi0_0                  159.4M     86.1M     73.3M  54% /pfrm2.0
[Expert@MAINTENANCE_MODE]# dd

[Expert@MAINTENANCE_MODE]# mount
rootfs on / type rootfs (rw)
proc on /proc type proc (rw,relatime)
tmpfs on /tmp type tmpfs (rw,relatime,size=20480k)
tmpfs on /fwtmp type tmpfs (rw,relatime,size=40960k)
devpts on /dev/pts type devpts (rw,relatime,gid=4,mode=620)
none on /sys type sysfs (rw,relatime)
ubi2_0 on /logs type ubifs (rw,sync,relatime)
ubi3_0 on /storage type ubifs (rw,sync,relatime)
ubi0_0 on /pfrm2.0 type ubifs (rw,sync,relatime)

tu juz jest obiecujaco

Dom : router https://i.imgur.com/IuB6Zwy.png | TP-LINK T1700G-28TQ |Zyxel XGS-1210-12 | 6x Ruckus r310 unleashed  + Ruckus icx7150-c12p | Truenas scale 124TB 25Gb| Xpenology 12TB | apc smart ups 750 lcd smile 100Mb/s - 25Gb/s
Podróżne : GL.Inet MT3000  +1TB hdd
Działka : rb260gs 1j wdm 1Gb+ ruckus r310 + nb m5 + kilka kamer ip  + panel 285Wp + lifepo4 12v 60Ah .

9 Odpowiedź przez mpstrong (edytowany przez mpstrong 2024-06-22 17:34:32)

  • Zarejestrowany: 2024-06-22
  • Posty: 3

Odp: Checkpoint L-71 openwrt

Będę szukać tych źródełek u producenta.

Warto ogarnąć ten sprzęt bo kończy mu się subskrypcja producenta więc będzie go dużo na rynku a bebechy ma nie najgorsze

10 Odpowiedź przez ambrozy5

  • Zarejestrowany: 2015-01-27
  • Posty: 2,429

Odp: Checkpoint L-71 openwrt

Jakiś czas temu dobra dusza podzieliła się źródełkami producenta do tego modelu, ktoś może ma ten model i działał w tym temacie?
https://github.com/juliakittlinger/chec … 71-sources . ja mam L-72 ale może jak by się udało L-71 dodać to i ten też .

Dom : router https://i.imgur.com/IuB6Zwy.png | TP-LINK T1700G-28TQ |Zyxel XGS-1210-12 | 6x Ruckus r310 unleashed  + Ruckus icx7150-c12p | Truenas scale 124TB 25Gb| Xpenology 12TB | apc smart ups 750 lcd smile 100Mb/s - 25Gb/s
Podróżne : GL.Inet MT3000  +1TB hdd
Działka : rb260gs 1j wdm 1Gb+ ruckus r310 + nb m5 + kilka kamer ip  + panel 285Wp + lifepo4 12v 60Ah .

11 Odpowiedź przez tmn505 (edytowany przez tmn505 2026-03-16 19:45:01)

  • tmn505
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2020-05-16
  • Posty: 23

Odp: Checkpoint L-71 openwrt

To musiałby być ktoś z dość dużą dozą samozaparcia. Zajrzyj na dtsi[1] dla tego SoC jaki ubogi. Jak przeszukasz listę mailingową kernela może znajdziesz jakieś stare patche rozszerzające wsparcie, ale nie licz na to żeby dało się je zaaplikować i działały od ręki.

1. https://git.kernel.org/pub/scm/linux/ke … lpine.dtsi

12 Odpowiedź przez ambrozy5 (edytowany przez ambrozy5 2026-03-20 10:34:55)

  • Zarejestrowany: 2015-01-27
  • Posty: 2,429

Odp: Checkpoint L-71 openwrt

Z jednym routerem na tym chipie dali sobie rady https://forum.openwrt.org/t/netgear-x10-r9000/3913/823 choć oficjalne wsparcie to nieco odległe osiagniecie. Jest też trzeci zawodnik od mikrotika https://forum.openwrt.org/t/successfull … hx4/247207 . Napisałem maila do centrum gpl check pointa o źródłą do l-72, zobaczymy czy dadzą .

Dom : router https://i.imgur.com/IuB6Zwy.png | TP-LINK T1700G-28TQ |Zyxel XGS-1210-12 | 6x Ruckus r310 unleashed  + Ruckus icx7150-c12p | Truenas scale 124TB 25Gb| Xpenology 12TB | apc smart ups 750 lcd smile 100Mb/s - 25Gb/s
Podróżne : GL.Inet MT3000  +1TB hdd
Działka : rb260gs 1j wdm 1Gb+ ruckus r310 + nb m5 + kilka kamer ip  + panel 285Wp + lifepo4 12v 60Ah .