Witam serdecznie posiadam 2 takie routery jak w temacie z czego jeden ostatnio ciągle bootuje mi do recovery , mogę od nowa postawić openwrt ale po restarcie wraca zawsze do partycji recovery.

Porównałem logi z obydwóch urządzeń i wydaje mi się że coś z alokacją pamięci się dzieje , czy ktoś bardziej doświadczony mógł by zerknąć ?

[    0.000000] Linux version 5.10.176 (builder@buildhost) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r20134-5f15225c1e) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Thu Apr 27 20:28:15 2023
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is Linksys EA7500 v2
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] VPE topology {2,2} total 4
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] On node 0 totalpages: 65536
[    0.000000]   Normal zone: 576 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65536 pages, LIFO batch:15
[    0.000000] percpu: Embedded 15 pages/cpu s30480 r8192 d22768 u61440
[    0.000000] pcpu-alloc: s30480 r8192 d22768 u61440 alloc=15*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64960
[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=000442c1
[    0.000000] Readback ErrCtl register=000442c1
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 249296K/262144K available (7064K kernel code, 631K rwdata, 832K rodata, 1252K init, 243K bss, 12848K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000]     Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 256
[    0.000000] CPU Clock: 880MHz
[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[    0.000012] sched_clock: 64 bits at 880MHz, resolution 1ns, wraps every 4398046511103ns
[    0.007947] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[    0.017000] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[    0.083161] pid_max: default: 32768 minimum: 301
[    0.087925] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.095128] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.105781] rcu: Hierarchical SRCU implementation.
[    0.110834] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.118954] smp: Bringing up secondary CPUs ...
[    0.124247] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.124258] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.124269] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.124345] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.178742] Synchronize counters for CPU 1: done.
[    0.211248] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.211258] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.211265] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.211313] CPU2 revision is: 0001992f (MIPS 1004Kc)
[    0.270187] Synchronize counters for CPU 2: done.
[    0.300796] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.300805] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.300813] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.300862] CPU3 revision is: 0001992f (MIPS 1004Kc)
[    0.355376] Synchronize counters for CPU 3: done.
[    0.385244] smp: Brought up 1 node, 4 CPUs
[    0.393417] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.403241] futex hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.410257] pinctrl core: initialized pinctrl subsystem
[    0.417923] NET: Registered protocol family 16
[    0.423522] thermal_sys: Registered thermal governor 'step_wise'
[    0.424965] cpuidle: using governor teo
[    0.443801] FPU Affinity set after 11720 emulations
[    0.470837] clocksource: Switched to clocksource GIC
[    0.477611] NET: Registered protocol family 2
[    0.482308] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.491250] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.499571] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.507229] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.514312] TCP: Hash tables configured (established 2048 bind 2048)
[    0.520820] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.527279] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.534543] NET: Registered protocol family 1
[    0.538839] PCI: CLS 0 bytes, default 32
[    0.545289] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    0.556018] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.561804] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.572410] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.581761] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.587606] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.593478] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.599928] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.610460] printk: console [ttyS0] disabled
[    0.614807] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
[    0.623814] printk: console [ttyS0] enabled
[    0.632068] printk: bootconsole [early0] disabled
[    0.644431] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
[    0.650837] nand: Macronix MX30LF1G18AC
[    0.654664] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    0.662351] mt7621-nand 1e003000.nand: ECC strength adjusted to 4 bits
[    0.669737] read_bbt: found bbt at block 1023
[    0.674270] 11 fixed-partitions partitions found on MTD device mt7621-nand
[    0.681144] Creating 11 MTD partitions on "mt7621-nand":
[    0.686442] 0x000000000000-0x000000080000 : "boot"
[    0.697486] 0x000000080000-0x0000000c0000 : "u_env"
[    0.705893] 0x0000000c0000-0x000000100000 : "factory"
[    0.714483] 0x000000100000-0x000000140000 : "s_env"
[    0.722973] 0x000000140000-0x000000180000 : "devinfo"
[    0.731725] 0x000000180000-0x000000580000 : "kernel"
[    0.778107] 0x000000580000-0x000002980000 : "ubi"
[    1.145898] 0x000002980000-0x000002d80000 : "alt_kernel"
[    1.192721] 0x000002d80000-0x000005180000 : "alt_rootfs"
[    1.560664] 0x000005180000-0x000005280000 : "sysdiag"
[    1.576956] 0x000005280000-0x000007f80000 : "syscfg"
[    2.081958] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[    2.090915] mtk_soc_eth 1e100000.ethernet: generated random MAC address 32:10:86:ff:43:d4
[    2.099980] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
[    2.109239] i2c /dev entries driver
[    2.115265] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
[    2.122013] mt7621-pci 1e140000.pcie:   No bus range found for /pcie@1e140000, using [bus 00-ff]
[    2.130812] mt7621-pci 1e140000.pcie:      MEM 0x0060000000..0x006fffffff -> 0x0000000000
[    2.138965] mt7621-pci 1e140000.pcie:       IO 0x001e160000..0x001e16ffff -> 0x0000000000
[    2.147231] mt7621-pci 1e140000.pcie: Parsing DT failed
[    2.154933] NET: Registered protocol family 10
[    2.161255] Segment Routing with IPv6
[    2.165021] NET: Registered protocol family 17
[    2.169523] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    2.182911] 8021q: 802.1Q VLAN Support v1.8
[    2.190637] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[    2.214395] mt7530 mdio-bus:1f wan (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7530 PHY] (irq=26)
[    2.226641] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7530 PHY] (irq=27)
[    2.238849] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7530 PHY] (irq=28)
[    2.251162] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7530 PHY] (irq=29)
[    2.263392] mt7530 mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7530 PHY] (irq=30)
[    2.275893] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode
[    2.286332] DSA: tree 0 setup
[    2.289597] rt2880-pinmux pinctrl: pcie is already enabled
[    2.295167] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
[    2.301884] mt7621-pci 1e140000.pcie:   No bus range found for /pcie@1e140000, using [bus 00-ff]
[    2.310677] mt7621-pci 1e140000.pcie:      MEM 0x0060000000..0x006fffffff -> 0x0000000000
[    2.318826] mt7621-pci 1e140000.pcie:       IO 0x001e160000..0x001e16ffff -> 0x0000000000
[    2.327088] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1)
[    2.334841] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0)
[    2.342473] mt7621-pci 1e140000.pcie: failed to parse bus ranges property: -22
[    2.449868] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz
[    2.455452] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz
[    2.561179] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK)
[    2.568116] mt7621-pci 1e140000.pcie: PCIE0 enabled
[    2.572984] mt7621-pci 1e140000.pcie: PCIE1 enabled
[    2.577845] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[    2.587284] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
[    2.593650] pci_bus 0000:00: root bus resource [io  0x1e160000-0x1e16ffff]
[    2.600500] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[    2.607391] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.612872] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] (bus address [0x00000000-0x0fffffff])
[    2.623071] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[    2.629070] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    2.635330] pci 0000:00:00.0: reg 0x14: [mem 0x60200000-0x6020ffff]
[    2.641650] pci 0000:00:00.0: supports D1
[    2.645644] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    2.651810] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[    2.657832] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    2.664114] pci 0000:00:01.0: reg 0x14: [mem 0x60210000-0x6021ffff]
[    2.670419] pci 0000:00:01.0: supports D1
[    2.674427] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[    2.681747] pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280
[    2.687786] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
[    2.694834] pci 0000:01:00.0: reg 0x10: [mem size 0x00100000 64bit]
[    2.701263] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[    2.717372] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    2.722632] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
[    2.728701] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    2.735484] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    2.742328] pci 0000:02:00.0: [14c3:7615] type 00 class 0x000280
[    2.748351] pci 0000:02:00.0: reg 0x10: initial BAR value 0x00000000 invalid
[    2.755397] pci 0000:02:00.0: reg 0x10: [mem size 0x00100000 64bit]
[    2.761828] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[    2.777940] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
[    2.783198] pci 0000:00:01.0:   bridge window [io  0x0000-0x0fff]
[    2.789267] pci 0000:00:01.0:   bridge window [mem 0x60100000-0x601fffff]
[    2.796050] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    2.802712] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    2.809297] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.816247] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[    2.822849] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.829784] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[    2.836561] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
[    2.843345] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
[    2.850111] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
[    2.856890] pci 0000:00:00.0: BAR 7: assigned [io  0x1e160000-0x1e160fff]
[    2.863670] pci 0000:00:01.0: BAR 7: assigned [io  0x1e161000-0x1e161fff]
[    2.870440] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
[    2.877744] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.882707] pci 0000:00:00.0:   bridge window [io  0x1e160000-0x1e160fff]
[    2.889466] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    2.896249] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
[    2.903560] pci 0000:00:01.0: PCI bridge to [bus 02]
[    2.908503] pci 0000:00:01.0:   bridge window [io  0x1e161000-0x1e161fff]
[    2.915276] pci 0000:00:01.0:   bridge window [mem 0x60100000-0x601fffff]
[    2.925525] UBI: auto-attach mtd6
[    2.928863] ubi0: attaching mtd6
[    2.932455] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control rx/tx
[    3.035232] UBI: EOF marker found, PEBs from 37 will be erased
[    3.355476] ubi0: scanning is finished
[    3.401063] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 229 LEBs
[    3.408734] ubi0: attached mtd6 (name "ubi", size 36 MiB)
[    3.414165] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    3.421024] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    3.427780] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    3.434720] ubi0: good PEBs: 288, bad PEBs: 0, corrupted PEBs: 0
[    3.440716] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    3.447906] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1682627295
[    3.457007] ubi0: available PEBs: 0, total reserved PEBs: 288, PEBs reserved for bad PEB handling: 20
[    3.466245] ubi0: background thread "ubi_bgt0d" started, PID 466
[    3.468172] block ubiblock0_0: created from ubi0:0(rootfs)
[    3.477773] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    3.520010] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    3.530759] Freeing unused kernel memory: 1252K
[    3.535295] This architecture does not have kernel memory protection.
[    3.541736] Run /sbin/init as init process
[    3.545812]   with arguments:
[    3.545817]     /sbin/init
[    3.545822]   with environment:
[    3.545827]     HOME=/
[    3.545832]     TERM=linux
[    4.259006] init: Console is alive
[    4.262904] init: - watchdog -
[    5.138883] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    5.273270] usbcore: registered new interface driver usbfs
[    5.278906] usbcore: registered new interface driver hub
[    5.284397] usbcore: registered new device driver usb
[    5.300065] xhci-mtk 1e1c0000.xhci: supply vbus not found, using dummy regulator
[    5.307758] xhci-mtk 1e1c0000.xhci: supply vusb33 not found, using dummy regulator
[    5.315564] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    5.320935] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[    5.340735] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000290010
[    5.349914] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
[    5.355888] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    5.361221] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[    5.368687] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
[    5.376103] hub 1-0:1.0: USB hub found
[    5.379994] hub 1-0:1.0: 2 ports detected
[    5.384943] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.394039] hub 2-0:1.0: USB hub found
[    5.397907] hub 2-0:1.0: 1 port detected
[    5.410033] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    5.430980] init: - preinit -
[    6.234953] random: jshn: uninitialized urandom read (4 bytes read)
[    6.314768] random: jshn: uninitialized urandom read (4 bytes read)
[    6.535190] random: jshn: uninitialized urandom read (4 bytes read)
[    6.898810] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
[    6.907212] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[    6.911087] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[    6.922630] 8021q: adding VLAN 0 to HW filter on device lan1
[    6.930925] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   11.139795] UBIFS (ubi0:1): default file-system created
[   11.146390] UBIFS (ubi0:1): Mounting in unauthenticated mode
[   11.152379] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 616
[   11.277462] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[   11.285305] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   11.295192] UBIFS (ubi0:1): FS size: 27807744 bytes (26 MiB, 219 LEBs), journal size 1396736 bytes (1 MiB, 11 LEBs)
[   11.305594] UBIFS (ubi0:1): reserved for root: 1313428 bytes (1282 KiB)
[   11.312198] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 0340C554-4638-414C-8580-EDD087CC2A9F, small LPT model
[   11.326855] mount_root: overlay filesystem has not been fully initialized yet
[   11.334827] mount_root: switching to ubifs overlay
[   11.348129] urandom-seed: Seed file not found (/etc/urandom.seed)
[   11.524179] procd: - early -
[   11.527299] procd: - watchdog -
[   12.180772] procd: - watchdog -
[   12.298821] procd: - ubus -
[   12.438760] random: ubusd: uninitialized urandom read (4 bytes read)
[   12.461472] random: ubusd: uninitialized urandom read (4 bytes read)
[   12.468324] random: ubusd: uninitialized urandom read (4 bytes read)
[   12.481296] procd: - init -
[   13.271903] kmodloader: loading kernel modules from /etc/modules.d/*
[   13.584059] Loading modules backported from Linux version v5.15.92-0-ge515b9902f5f
[   13.591658] Backport generated by backports.git v5.15.92-1-0-gdfe0f60c
[   13.835052] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=22
[   13.840478] pci 0000:00:00.0: enabling device (0006 -> 0007)
[   13.846151] mt7615e 0000:01:00.0: enabling device (0000 -> 0002)
[   13.864815] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.870300] mt7621-pci 1e140000.pcie: bus=2 slot=1 irq=23
[   13.875830] pci 0000:00:01.0: enabling device (0006 -> 0007)
[   13.881352] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
[   13.881352]
[   13.881526] mt7615e 0000:02:00.0: enabling device (0000 -> 0002)
[   13.913097] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   13.913147] ieee80211 phy1: copying sband (band 1) due to VHT EXT NSS BW flag
[   13.931894] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
[   13.931894]
[   13.984792] PPP generic driver version 2.4.2
[   13.990957] NET: Registered protocol family 24
[   14.005641] kmodloader: done loading kernel modules from /etc/modules.d/*
[   14.186732] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20200814163649
[   14.186776] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20200814163649
[   14.205750] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20190121161307
[   14.211125] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20190121161307
[   14.746705] urngd: v1.0.2 started.
[   15.284792] random: jshn: uninitialized urandom read (4 bytes read)
[   15.429806] random: jshn: uninitialized urandom read (4 bytes read)
[   15.765703] random: jshn: uninitialized urandom read (4 bytes read)
[   15.865749] random: crng init done
[   15.869183] random: 31 urandom warning(s) missed due to ratelimiting
[   45.065702] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
[   45.084124] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
[   45.092401] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   45.096688] device eth0 entered promiscuous mode
[   45.106218] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[   45.113461] 8021q: adding VLAN 0 to HW filter on device lan1
[   45.122134] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   45.129864] br-lan: port 1(lan1) entered blocking state
[   45.135266] br-lan: port 1(lan1) entered disabled state
[   45.141575] device lan1 entered promiscuous mode
[   45.175377] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode
[   45.182874] 8021q: adding VLAN 0 to HW filter on device lan2
[   45.192572] br-lan: port 2(lan2) entered blocking state
[   45.197870] br-lan: port 2(lan2) entered disabled state
[   45.204724] device lan2 entered promiscuous mode
[   45.220133] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode
[   45.227577] 8021q: adding VLAN 0 to HW filter on device lan3
[   45.238430] br-lan: port 3(lan3) entered blocking state
[   45.243868] br-lan: port 3(lan3) entered disabled state
[   45.251968] device lan3 entered promiscuous mode
[   45.267788] mt7530 mdio-bus:1f lan4: configuring for phy/gmii link mode
[   45.275162] 8021q: adding VLAN 0 to HW filter on device lan4
[   45.285006] br-lan: port 4(lan4) entered blocking state
[   45.290306] br-lan: port 4(lan4) entered disabled state
[   45.297861] device lan4 entered promiscuous mode
[   45.329837] mt7530 mdio-bus:1f wan: configuring for phy/gmii link mode
[   45.337054] 8021q: adding VLAN 0 to HW filter on device wan
[   47.827912] mt7530 mdio-bus:1f lan2: Link is Up - 1Gbps/Full - flow control off
[   47.835323] br-lan: port 2(lan2) entered blocking state
[   47.840574] br-lan: port 2(lan2) entered forwarding state
[   47.847165] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   48.384581] mt7530 mdio-bus:1f lan4: Link is Up - 1Gbps/Full - flow control rx/tx
[   48.392154] br-lan: port 4(lan4) entered blocking state
[   48.397362] br-lan: port 4(lan4) entered forwarding state