1 Temat przez secam7 (edytowany przez secam7 2024-04-11 15:22:01)

  • secam7
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-02-19
  • Posty: 432

Temat: Arcadyan AW1000

Pozwolę sobie założyć nowy temat związany z tym routerem i nie kontynuować już w tym wątku:  https://eko.one.pl/forum/viewtopic.php?id=23075 .

Po problemach opisanych w powyższym temacie, wgrałem snapshot openwrt i mam problem, brak /dev/cdc-wdm0 .

root@OpenWrt:~# cat /sys/kernel/debug/usb/devices 

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 6.01
S:  Manufacturer=Linux 6.1.80 xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=xhci-hcd.1.auto
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=5000 MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 3.00 Cls=09(hub  ) Sub=00 Prot=03 MxPS= 9 #Cfgs=  1
P:  Vendor=1d6b ProdID=0003 Rev= 6.01
S:  Manufacturer=Linux 6.1.80 xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=xhci-hcd.1.auto
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 6.01
S:  Manufacturer=Linux 6.1.80 xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=xhci-hcd.2.auto
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=5000 MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 3.00 Cls=09(hub  ) Sub=00 Prot=03 MxPS= 9 #Cfgs=  1
P:  Vendor=1d6b ProdID=0003 Rev= 6.01
S:  Manufacturer=Linux 6.1.80 xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=xhci-hcd.2.auto
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2c7c ProdID=0800 Rev= 4.14
S:  Manufacturer=Quectel
S:  Product=RG500Q-EA
S:  SerialNumber=8dfc4c40
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
A:  FirstIf#= 4 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=(none)
E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:* If#= 5 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=(none)
I:  If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=(none)
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
root@OpenWrt:~#

Czego może jeszcze brakować?

[EDIT]

Pacjent podczas operacji! smile

https://i.ibb.co/RQQyFkS/IMG-20240308-171219.jpg

Kupiłem kartę i mam 5G (to jeszcze na ROOTer):
https://www.speedtest.pl/wynik/398074419

https://www.speedtest.net/result/15988667814.png

To po kablu, bo mój laptop już parę lat ma i wifi ma tylko 300Mb.

Tak jest na MiFi:
https://www.speedtest.pl/wynik/398077240

2 Odpowiedź przez MiG25

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,793

Odp: Arcadyan AW1000

No bo pewnie w openwrt  obsługuje tylko qmi , a Ty masz go w mbim...

3 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Arcadyan AW1000

Kmodow od mbim i umbim

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Arcadyan AW1000

@secam7: zaraz będą nowe obrazy.

Widzicie, dlatego tak trudno robić wsparcie jak fizycznie nie ma urządzenia. Człowiek po prostu nie wie co się dzieje.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Arcadyan AW1000

Pobierz z tego samego katalogu i testuj.

Jeżeli to było to co zmieniłem to tam jest "dziwny" flash.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

6 Odpowiedź przez MiG25 (edytowany przez MiG25 2024-03-08 17:41:32)

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,793

Odp: Arcadyan AW1000

No o tym dziwnym flashu jest pisane w PR... https://github.com/openwrt/openwrt/pull/13725

7 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Arcadyan AW1000

Dokładnie tak, a ja tego nie przeniosłem z rooter'a

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

8 Odpowiedź przez MiG25

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,793

Odp: Arcadyan AW1000

A dlaczego przenosisz z ROOTera , a nie z wsparcia OpenWRT ?

9 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Arcadyan AW1000

Openwrt ma już inne dtsy które trzeba sobie przepisać.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

10 Odpowiedź przez secam7

  • secam7
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-02-19
  • Posty: 432

Odp: Arcadyan AW1000

Cezary napisał/a:

Kmodow od mbim i umbim

Dzięki, doinstalowałem interface się pokazał, ale nie potrafił się połączyć, jakieś problemy z rejestracją i z pinem (choć na simie pinu brak).

11 Odpowiedź przez frutis

  • frutis
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2009-11-10
  • Posty: 1,686

Odp: Arcadyan AW1000

Co do logów z poprzedniego wątku to chyba jest źle ustawiony NAND:

[    0.801760] nand: 1024 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 128
[    0.805975] nand: ECC (step, strength) = (512, 8) does not fit in OOB
[    0.805985] qcom-nandc 79b0000.nand-controller: No valid ECC settings possible

12 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Arcadyan AW1000

frutis napisał/a:

Co do logów z poprzedniego wątku to chyba jest źle ustawiony NAND:

[    0.801760] nand: 1024 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 128
[    0.805975] nand: ECC (step, strength) = (512, 8) does not fit in OOB
[    0.805985] qcom-nandc 79b0000.nand-controller: No valid ECC settings possible

Zobacz kilka postów wyżej...

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

13 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Arcadyan AW1000

secam7 napisał/a:
Cezary napisał/a:

Kmodow od mbim i umbim

Dzięki, doinstalowałem interface się pokazał, ale nie potrafił się połączyć, jakieś problemy z rejestracją i z pinem (choć na simie pinu brak).

Ja bym sugerował... zrestartować router, o ile ustawiłeś prawidłowo konfig. mbim jest czasami wrażliwy i jak coś pójdzie nie tak z kolejnością to wpada w dziwny tryb i najprościej go zresetować.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

14 Odpowiedź przez MiG25 (edytowany przez MiG25 2024-03-22 12:23:18)

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,793

Odp: Arcadyan AW1000

A może na razie go przełączyć na QMI ?

Komenda AT :

AT+QCFG="usbnet",0

Ma ustawić QMI , a komenda:

AT+QCFG="usbnet",2

na MBIM. ( po każdej zmianie AT=CFUN=1,1 ,czyli reboot modemu)
No a obecny stan pokaże pewnie:

AT+QCFG="usbnet"

EDIT: jest jeszcze wartość 1 na protokół ECM , i wtedy ustawia się jako karta ethernet na usb0...

15 Odpowiedź przez secam7 (edytowany przez secam7 2024-03-08 19:26:33)

  • secam7
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-02-19
  • Posty: 432

Odp: Arcadyan AW1000

Wgrałem ponownie rooter i teraz jest tak:

AT+QCFG="usbnet"

+QCFG: "usbnet",2

OK

Przestawię na qmi, jak zadziała to będzie tak jak chce openwrt.

[EDIT]

Zadziałało teraz jest qmi.

16 Odpowiedź przez MiG25

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,793

Odp: Arcadyan AW1000

Później można porównać , który tryb lepszy (szybszy)

17 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Arcadyan AW1000

@secam7: obrazy sprawdź.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

18 Odpowiedź przez secam7

  • secam7
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-02-19
  • Posty: 432

Odp: Arcadyan AW1000

Działa, wynik speedtestu w pierwszym poście.
Hmm, 2 testy i 2GB poszły z karty!

W dmesg jakieś dziwne coś, ale wydaje się nie przeszkadzać:

root@MiFi:~# dmesg 
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.15.148 (cezary@eko.one.pl) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r23004-7f0db09513) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Thu Mar 7 21:14:32 2024
[    0.000000] Machine model: Arcadyan AW1000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x0000000040ffffff]
[    0.000000]   node   0: [mem 0x0000000041000000-0x000000004a3fffff]
[    0.000000]   node   0: [mem 0x000000004a400000-0x00000000510fffff]
[    0.000000]   node   0: [mem 0x0000000051100000-0x000000007fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 17 pages/cpu s30808 r8192 d30632 u69632
[    0.000000] pcpu-alloc: s30808 r8192 d30632 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 258048
[    0.000000] Kernel command line: console=ttyMSM0,115200n8 pcie_dev=RG50 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait root=/dev/ubiblock0_1
[    0.000000] Unknown kernel command line parameters "pcie_dev=RG50", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 888440K/1048576K available (7808K kernel code, 860K rwdata, 1400K rodata, 1280K init, 288K bss, 160136K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000]     Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: 0xffffffc00837cb10
[    0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479]
[    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000127] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000144] pid_max: default: 32768 minimum: 301
[    0.000613] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.000632] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.002618] rcu: Hierarchical SRCU implementation.
[    0.003398] smp: Bringing up secondary CPUs ...
[    0.004030] Detected VIPT I-cache on CPU1
[    0.004098] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.004717] Detected VIPT I-cache on CPU2
[    0.004759] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.005366] Detected VIPT I-cache on CPU3
[    0.005403] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.005469] smp: Brought up 1 node, 4 CPUs
[    0.005496] SMP: Total of 4 processors activated.
[    0.005504] CPU features: detected: 32-bit EL0 Support
[    0.005512] CPU features: detected: CRC32 instructions
[    0.005559] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[    0.005568] CPU: All CPU(s) started at EL1
[    0.005590] alternatives: patching kernel code
[    0.015834] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.015870] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.016105] pinctrl core: initialized pinctrl subsystem
[    0.017535] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.018084] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[    0.018126] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.018163] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.018553] thermal_sys: Registered thermal governor 'step_wise'
[    0.020282] cpuidle: using governor menu
[    0.020546] ASID allocator initialised with 65536 entries
[    0.048684] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[    0.058680] SCSI subsystem initialized
[    0.058877] usbcore: registered new interface driver usbfs
[    0.058919] usbcore: registered new interface driver hub
[    0.058956] usbcore: registered new device driver usb
[    0.059431] qcom_scm: convention: smc arm 64
[    0.060976] clocksource: Switched to clocksource arch_sys_counter
[    0.061907] NET: Registered PF_INET protocol family
[    0.062047] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.063090] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[    0.063118] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.063133] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.063221] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.063375] TCP: Hash tables configured (established 8192 bind 8192)
[    0.063473] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.063514] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.063736] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.063781] PCI: CLS 0 bytes, default 64
[    0.065073] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    0.069724] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.069749] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.070736] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.071901] qcom-qmp-phy 58000.phy: supply vdda-phy not found, using dummy regulator
[    0.072102] qcom-qmp-phy 58000.phy: supply vdda-pll not found, using dummy regulator
[    0.072600] qcom-qmp-phy 58000.phy: Registered Qcom-QMP phy
[    0.072849] qcom-qmp-phy 78000.phy: supply vdda-phy not found, using dummy regulator
[    0.072999] qcom-qmp-phy 78000.phy: supply vdda-pll not found, using dummy regulator
[    0.073358] qcom-qmp-phy 78000.phy: Registered Qcom-QMP phy
[    0.074168] qcom-qusb2-phy 59000.phy: supply vdda-pll not found, using dummy regulator
[    0.074289] qcom-qusb2-phy 59000.phy: supply vdda-phy-dpdm not found, using dummy regulator
[    0.074501] qcom-qusb2-phy 59000.phy: Registered Qcom-QUSB2 phy
[    0.074685] qcom-qusb2-phy 79000.phy: supply vdda-pll not found, using dummy regulator
[    0.074808] qcom-qusb2-phy 79000.phy: supply vdda-phy-dpdm not found, using dummy regulator
[    0.074947] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy
[    0.076730] gpio-export gpio-export: 4 gpio(s) exported
[    0.078306] bam-dma-engine 704000.dma-controller: num-channels unspecified in dt
[    0.078334] bam-dma-engine 704000.dma-controller: num-ees unspecified in dt
[    0.082390] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.084359] msm_serial 78b3000.serial: msm_serial: detected port #0
[    0.084409] msm_serial 78b3000.serial: uartclk = 3686400
[    0.084459] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 22, base_baud = 230400) is a MSM
[    0.084493] msm_serial: console setup on port #0
[    0.774160] printk: console [ttyMSM0] enabled
[    0.779311] msm_serial: driver initialized
[    0.787742] loop: module loaded
[    0.787815] Loading iSCSI transport class v2.0-870.
[    0.791987] nand: device found, Manufacturer ID: 0x98, Chip ID: 0xa3
[    0.794974] nand: Toshiba TH58NYG3S0HBAI4 8G 1.8V 8-bit
[    0.801583] nand: 1024 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 256
[    0.807375] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
[    0.817541] s1: supplied by regulator-dummy
[    0.820354] s2: supplied by regulator-dummy
[    0.824382] vdd_s3: supplied by regulator-dummy
[    0.828619] vdd_s4: supplied by regulator-dummy
[    0.833180] s5: supplied by regulator-dummy
[    0.837523] l1: supplied by regulator-dummy
[    0.841711] l2: supplied by regulator-dummy
[    0.845857] l3: supplied by regulator-dummy
[    0.849987] l4: supplied by regulator-dummy
[    0.854244] l5: supplied by regulator-dummy
[    0.858332] l6: supplied by regulator-dummy
[    0.862511] l7: supplied by regulator-dummy
[    0.866713] l8: supplied by regulator-dummy
[    0.870855] l9: supplied by regulator-dummy
[    0.875144] l11: supplied by regulator-dummy
[    0.879205] l12: supplied by regulator-dummy
[    0.883696] l13: supplied by regulator-dummy
[    0.902909] i2c_dev: i2c /dev entries driver
[    0.907166] sdhci: Secure Digital Host Controller Interface driver
[    0.907210] sdhci: Copyright(c) Pierre Ossman
[    0.912272] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.920186] remoteproc remoteproc0: releasing cd00000.q6v5_wcss
[    0.925150] NET: Registered PF_INET6 protocol family
[    0.929046] Segment Routing with IPv6
[    0.933313] In-situ OAM (IOAM) with IPv6
[    0.936869] NET: Registered PF_PACKET protocol family
[    0.940854] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    0.945879] 8021q: 802.1Q VLAN Support v1.8
[    0.976813] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[    0.977112] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
[    0.983166] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
[    0.989539] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
[    0.997213] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
[    1.004753] cpr3_mem_acc_init: apc: not using memory accelerator regulator
[    1.013852] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      SVS: open-loop= 704000 uV
[    1.020793] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      NOM: open-loop= 832000 uV
[    1.030782] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused    TURBO: open-loop= 888000 uV
[    1.040590] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused   STURBO: open-loop= 976000 uV
[    1.050448] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      SVS: quot[ 7]= 683, quot_offset[ 7]=   0
[    1.060212] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      NOM: quot[ 7]= 935, quot_offset[ 7]= 250
[    1.071062] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused    TURBO: quot[ 7]=1031, quot_offset[ 7]=  95
[    1.082005] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused   STURBO: quot[ 7]=1194, quot_offset[ 7]= 160
[    1.093079] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
[    1.095351] nand: device found, Manufacturer ID: 0x98, Chip ID: 0xa3
[    1.110631] nand: Toshiba TH58NYG3S0HBAI4 8G 1.8V 8-bit
[    1.117060] nand: 1024 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 256
[    1.122351] 26 qcomsmem partitions found on MTD device qcom_nand.0
[    1.129989] Creating 26 MTD partitions on "qcom_nand.0":
[    1.135990] 0x000000000000-0x000000100000 : "0:sbl1"
[    1.142430] 0x000000100000-0x000000200000 : "0:mibib"
[    1.147281] 0x000000200000-0x000000280000 : "0:bootconfig"
[    1.152073] 0x000000280000-0x000000300000 : "0:bootconfig1"
[    1.157392] 0x000000300000-0x000000600000 : "0:qsee"
[    1.164015] 0x000000600000-0x000000900000 : "0:qsee_1"
[    1.169101] 0x000000900000-0x000000980000 : "0:devcfg"
[    1.173059] 0x000000980000-0x000000a00000 : "0:devcfg_1"
[    1.178119] 0x000000a00000-0x000000a80000 : "0:apdp"
[    1.183619] 0x000000a80000-0x000000b00000 : "0:apdp_1"
[    1.188546] 0x000000b00000-0x000000b80000 : "0:rpm"
[    1.193539] 0x000000b80000-0x000000c00000 : "0:rpm_1"
[    1.198288] 0x000000c00000-0x000000c80000 : "0:cdt"
[    1.203533] 0x000000c80000-0x000000d00000 : "0:cdt_1"
[    1.208166] 0x000000d00000-0x000000d80000 : "0:appsblenv"
[    1.213442] 0x000000d80000-0x000000e80000 : "0:appsbl"
[    1.218988] 0x000000e80000-0x000000f80000 : "0:appsbl_1"
[    1.224056] 0x000000f80000-0x000001000000 : "0:art"
[    1.229259] 0x000001000000-0x000007400000 : "rootfs"
[    1.277334] mtd: setting mtd18 (rootfs) as root device
[    1.277855] mtdsplit: no squashfs found in "rootfs"
[    1.281425] 0x000007400000-0x000008c80000 : "0:wififw"
[    1.297334] 0x000008c80000-0x00000f080000 : "rootfs_1"
[    1.341546] 0x00000f080000-0x000010900000 : "0:wififw_1"
[    1.352667] 0x000010900000-0x000010b40000 : "0:ethphyfw"
[    1.354154] 0x000010b40000-0x000010c40000 : "0:board_data"
[    1.357925] 0x000010c40000-0x000011440000 : "0:arc_datadump"
[    1.366339] 0x000011440000-0x00003e000000 : "0:arc_data"
[    1.689304] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 19200 KHz, changing to: 1017600 KHz
[    1.690482] remoteproc remoteproc0: cd00000.q6v5_wcss is available
[    1.699452] ubi0: attaching mtd18
[    2.118924] ubi0: scanning is finished
[    2.125001] ubi0: attached mtd18 (name "rootfs", size 100 MiB)
[    2.125037] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
[    2.129743] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
[    2.136598] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192
[    2.143449] ubi0: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0
[    2.150215] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[    2.156471] ubi0: max/mean erase counter: 7/4, WL threshold: 4096, image sequence number: 1831545825
[    2.163505] ubi0: available PEBs: 0, total reserved PEBs: 400, PEBs reserved for bad PEB handling: 80
[    2.172800] ubi0: background thread "ubi_bgt0d" started, PID 528
[    2.173653] block ubiblock0_1: created from ubi0:1(rootfs)
[    2.191327] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    2.191749] Freeing unused kernel memory: 1280K
[    2.271159] Run /sbin/init as init process
[    2.271181]   with arguments:
[    2.271184]     /sbin/init
[    2.271187]   with environment:
[    2.271189]     HOME=/
[    2.271192]     TERM=linux
[    2.271195]     pcie_dev=RG50
[    2.381002] random: crng init done
[    2.432314] init: Console is alive
[    2.432454] init: - watchdog -
[    3.045331] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    3.183822] ssdk_switch_device_num_init[1335]:INFO:ess-switch dts node number: 1
[    3.183929] ssdk_dt_get_switch_node[1124]:INFO:ess-switch DT exist!
[    3.190297] ssdk_dt_parse_access_mode[999]:INFO:switch_access_mode: local bus
[    3.196316] ssdk_dt_parse_access_mode[1012]:INFO:switchreg_base_addr: 0x3a000000
[    3.203580] ssdk_dt_parse_access_mode[1013]:INFO:switchreg_size: 0x1000000
[    3.211045] ssdk_dt_parse_mac_mode[327]:INFO:mac mode = 0xb
[    3.217720] ssdk_dt_parse_mac_mode[333]:INFO:mac mode1 doesn't exit!
[    3.223196] ssdk_dt_parse_mac_mode[345]:INFO:mac mode2 = 0xff
[    3.229798] ssdk_dt_parse_phy_info[716]:INFO:[PORT 6] port_mac_sel = QGMAC_PORT
[    3.235465] ssdk_dt_parse_uniphy[364]:INFO:ess-uniphy DT exist!
[    3.242649] ssdk_dt_parse_intf_mac[942]:INFO:dp1 MAC ec:6c:9a:b7:a7:97
[    3.248485] ssdk_dt_parse_intf_mac[942]:INFO:dp2 MAC ec:6c:9a:b7:a7:97
[    3.255082] ssdk_dt_parse_intf_mac[942]:INFO:dp3 MAC ec:6c:9a:b7:a7:97
[    3.261594] ssdk_dt_parse_intf_mac[942]:INFO:dp4 MAC ec:6c:9a:b7:a7:97
[    3.268178] ssdk_plat_init[1692]:INFO:ssdk_plat_init start
[    3.391945] ssdk_gcc_clock_init[1275]:INFO:SSDK gcc clock init successfully!
[    3.394548] malibu_phy_api_ops_init[2846]:INFO:qca probe malibu phy driver succeeded!
[    3.437265] hsl_phy_phydev_get[773]:ERROR:phy_addr 4 phydev is NULL
[    3.447626] regi_init[3953]:INFO:Initializing HPPE!!
[    3.680982] ssdk_ppe_reset_init[1535]:INFO:ppe reset successfully!
[    3.684466] qca_hppe_portctrl_hw_init[126]:INFO:Hawkeye PPE port initializing
[    3.696082] hsl_phy_phydev_get[773]:ERROR:phy_addr 4 phydev is NULL
[    3.699387] hsl_phy_phydev_get[773]:ERROR:phy_addr 4 phydev is NULL
[    4.028383] ------------[ cut here ]------------
[    4.028399] gcc_uniphy1_port5_rx_clk already disabled
[    4.032065] WARNING: CPU: 1 PID: 534 at 0xffffffc0083d7c70
[    4.036999] Modules linked in: qca_ssdk(+) gpio_button_hotplug ext4 mbcache jbd2 aquantia hwmon crc_ccitt mii crc32c_generic
[    4.042395] CPU: 1 PID: 534 Comm: kmodloader Not tainted 5.15.148 #0
[    4.053754] Hardware name: Arcadyan AW1000 (DT)
[    4.060089] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    4.064346] pc : 0xffffffc0083d7c70
[    4.071282] lr : 0xffffffc0083d7c70
[    4.074755] sp : ffffffc00987b710
[    4.078228] x29: ffffffc00987b710 x28: ffffffc000977050 x27: 0000000000000008
[    4.081708] x26: 0000000000000000 x25: ffffffc00091c4f4 x24: 00000000000000ff
[    4.088825] x23: 0000000000000000 x22: 000000000000000b x21: 0000000000000016
[    4.095943] x20: ffffff80024c2600 x19: ffffff80024c2600 x18: ffffffc008a77b80
[    4.103062] x17: ffffff8002768ff8 x16: ffffff8002768ff8 x15: 00000000000002e5
[    4.110179] x14: 00000000000000f7 x13: ffffffc00987b448 x12: ffffffc008acfb80
[    4.117298] x11: 0000000000000004 x10: ffffffc008acfb80 x9 : 0000000000000000
[    4.124416] x8 : ffffffc008a77b30 x7 : ffffffc008a77b80 x6 : 00000000ffffefff
[    4.131533] x5 : ffffffc008acfb80 x4 : 00000000ffffefff x3 : 0000000000000001
[    4.138652] x2 : ffffffc008a77ae0 x1 : ffffffc008a77ae0 x0 : 0000000000000029
[    4.145771] Call trace:
[    4.152879]  0xffffffc0083d7c70
[    4.155136]  0xffffffc0083da1d4
[    4.158261]  0xffffffc000921748 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.161394]  0xffffffc000922128 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.167991]  0xffffffc000882a20 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.174327]  0xffffffc0009238f8 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.180664]  0xffffffc000923ea4 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.187001]  0xffffffc000985610 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.193338]  0xffffffc008014508
[    4.199668]  0xffffffc0080c14f4
[    4.202532]  0xffffffc0080c2eac
[    4.205657]  0xffffffc0080c3520
[    4.208783]  0xffffffc0080c36bc
[    4.211907]  0xffffffc008022f4c
[    4.215032]  0xffffffc008023060
[    4.218158]  0xffffffc008793308
[    4.221282]  0xffffffc008794128
[    4.224407]  0xffffffc0080115f4
[    4.227533] ---[ end trace ee37508a532c2413 ]---
[    4.230675] ------------[ cut here ]------------
[    4.235526] gcc_uniphy1_port5_rx_clk already unprepared
[    4.240130] WARNING: CPU: 1 PID: 534 at 0xffffffc0083da084
[    4.245073] Modules linked in: qca_ssdk(+) gpio_button_hotplug ext4 mbcache jbd2 aquantia hwmon crc_ccitt mii crc32c_generic
[    4.250640] CPU: 1 PID: 534 Comm: kmodloader Tainted: G        W         5.15.148 #0
[    4.262004] Hardware name: Arcadyan AW1000 (DT)
[    4.269723] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    4.273980] pc : 0xffffffc0083da084
[    4.280918] lr : 0xffffffc0083da084
[    4.284390] sp : ffffffc00987b710
[    4.287862] x29: ffffffc00987b710 x28: ffffffc000977050 x27: 0000000000000008
[    4.291342] x26: 0000000000000000 x25: ffffffc00091c4f4 x24: 00000000000000ff
[    4.298460] x23: 0000000000000000 x22: 000000000000000b x21: 0000000000000016
[    4.305579] x20: 0000000000000000 x19: ffffff80024c2600 x18: ffffffc008a77b80
[    4.312697] x17: ffffff8002768ff8 x16: ffffff8002768ff8 x15: 000000000000035d
[    4.319816] x14: 000000000000011f x13: ffffffc00987b448 x12: ffffffc008acfb80
[    4.326933] x11: 0000000000000004 x10: ffffffc008acfb80 x9 : 0000000000000000
[    4.334051] x8 : ffffffc008a77b30 x7 : ffffffc008a77b80 x6 : 00000000ffffefff
[    4.341168] x5 : ffffffc008acfb80 x4 : 00000000ffffefff x3 : 0000000000000001
[    4.348286] x2 : ffffffc008a77ae0 x1 : ffffffc008a77ae0 x0 : 000000000000002b
[    4.355406] Call trace:
[    4.362514]  0xffffffc0083da084
[    4.364772]  0xffffffc0083da0d0
[    4.367897]  0xffffffc000921750 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.371028]  0xffffffc000922128 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.377626]  0xffffffc000882a20 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.383963]  0xffffffc0009238f8 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.390299]  0xffffffc000923ea4 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.396637]  0xffffffc000985610 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.402973]  0xffffffc008014508
[    4.409303]  0xffffffc0080c14f4
[    4.412167]  0xffffffc0080c2eac
[    4.415292]  0xffffffc0080c3520
[    4.418418]  0xffffffc0080c36bc
[    4.421542]  0xffffffc008022f4c
[    4.424668]  0xffffffc008023060
[    4.427792]  0xffffffc008793308
[    4.430917]  0xffffffc008794128
[    4.434043]  0xffffffc0080115f4
[    4.437168] ---[ end trace ee37508a532c2414 ]---
[    4.440305] ------------[ cut here ]------------
[    4.445158] gcc_uniphy1_port5_tx_clk already disabled
[    4.449765] WARNING: CPU: 1 PID: 534 at 0xffffffc0083d7c70
[    4.454707] Modules linked in: qca_ssdk(+) gpio_button_hotplug ext4 mbcache jbd2 aquantia hwmon crc_ccitt mii crc32c_generic
[    4.460101] CPU: 1 PID: 534 Comm: kmodloader Tainted: G        W         5.15.148 #0
[    4.471466] Hardware name: Arcadyan AW1000 (DT)
[    4.479185] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    4.483443] pc : 0xffffffc0083d7c70
[    4.490380] lr : 0xffffffc0083d7c70
[    4.493852] sp : ffffffc00987b710
[    4.497325] x29: ffffffc00987b710 x28: ffffffc000977050 x27: 0000000000000008
[    4.500804] x26: 0000000000000000 x25: ffffffc00091c4f4 x24: 00000000000000ff
[    4.507923] x23: 0000000000000000 x22: 000000000000000b x21: 0000000000000017
[    4.515040] x20: ffffff80024c2000 x19: ffffff80024c2000 x18: ffffffc008a77b80
[    4.522158] x17: ffffff8002768ff8 x16: ffffff8002768ff8 x15: 00000000000003d5
[    4.529276] x14: 0000000000000147 x13: ffffffc00987b448 x12: ffffffc008acfb80
[    4.536395] x11: 0000000000000004 x10: ffffffc008acfb80 x9 : 0000000000000000
[    4.543512] x8 : ffffffc008a77b30 x7 : ffffffc008a77b80 x6 : 00000000ffffefff
[    4.550630] x5 : ffffffc008acfb80 x4 : 00000000ffffefff x3 : 0000000000000001
[    4.557749] x2 : ffffffc008a77ae0 x1 : ffffffc008a77ae0 x0 : 0000000000000029
[    4.564866] Call trace:
[    4.571975]  0xffffffc0083d7c70
[    4.574234]  0xffffffc0083da1d4
[    4.577359]  0xffffffc000921748 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.580490]  0xffffffc000922138 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.587087]  0xffffffc000882a20 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.593425]  0xffffffc0009238f8 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.599762]  0xffffffc000923ea4 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.606098]  0xffffffc000985610 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.612435]  0xffffffc008014508
[    4.618764]  0xffffffc0080c14f4
[    4.621629]  0xffffffc0080c2eac
[    4.624755]  0xffffffc0080c3520
[    4.627880]  0xffffffc0080c36bc
[    4.631004]  0xffffffc008022f4c
[    4.634129]  0xffffffc008023060
[    4.637254]  0xffffffc008793308
[    4.640379]  0xffffffc008794128
[    4.643504]  0xffffffc0080115f4
[    4.646629] ---[ end trace ee37508a532c2415 ]---
[    4.649765] ------------[ cut here ]------------
[    4.654624] gcc_uniphy1_port5_tx_clk already unprepared
[    4.659227] WARNING: CPU: 1 PID: 534 at 0xffffffc0083da084
[    4.664169] Modules linked in: qca_ssdk(+) gpio_button_hotplug ext4 mbcache jbd2 aquantia hwmon crc_ccitt mii crc32c_generic
[    4.669737] CPU: 1 PID: 534 Comm: kmodloader Tainted: G        W         5.15.148 #0
[    4.681100] Hardware name: Arcadyan AW1000 (DT)
[    4.688820] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    4.693078] pc : 0xffffffc0083da084
[    4.700015] lr : 0xffffffc0083da084
[    4.703488] sp : ffffffc00987b710
[    4.706959] x29: ffffffc00987b710 x28: ffffffc000977050 x27: 0000000000000008
[    4.710441] x26: 0000000000000000 x25: ffffffc00091c4f4 x24: 00000000000000ff
[    4.717558] x23: 0000000000000000 x22: 000000000000000b x21: 0000000000000017
[    4.724677] x20: 0000000000000000 x19: ffffff80024c2000 x18: ffffffc008a77b80
[    4.731793] x17: ffffff8002768ff8 x16: ffffff8002768ff8 x15: 000000000000044d
[    4.738911] x14: 000000000000016f x13: ffffffc00987b448 x12: ffffffc008acfb80
[    4.746030] x11: 0000000000000004 x10: ffffffc008acfb80 x9 : 0000000000000000
[    4.753149] x8 : ffffffc008a77b30 x7 : ffffffc008a77b80 x6 : 00000000ffffefff
[    4.760266] x5 : ffffffc008acfb80 x4 : 00000000ffffefff x3 : 0000000000000001
[    4.767385] x2 : ffffffc008a77ae0 x1 : ffffffc008a77ae0 x0 : 000000000000002b
[    4.774502] Call trace:
[    4.781610]  0xffffffc0083da084
[    4.783868]  0xffffffc0083da0d0
[    4.786995]  0xffffffc000921750 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.790127]  0xffffffc000922138 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.796723]  0xffffffc000882a20 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.803061]  0xffffffc0009238f8 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.809396]  0xffffffc000923ea4 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.815734]  0xffffffc000985610 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.822070]  0xffffffc008014508
[    4.828399]  0xffffffc0080c14f4
[    4.831264]  0xffffffc0080c2eac
[    4.834390]  0xffffffc0080c3520
[    4.837514]  0xffffffc0080c36bc
[    4.840640]  0xffffffc008022f4c
[    4.843765]  0xffffffc008023060
[    4.846889]  0xffffffc008793308
[    4.850014]  0xffffffc008794128
[    4.853139]  0xffffffc0080115f4
[    4.856265] ---[ end trace ee37508a532c2416 ]---
[    4.859404] ------------[ cut here ]------------
[    4.864254] gcc_uniphy1_port5_rx_clk already disabled
[    4.868863] WARNING: CPU: 1 PID: 534 at 0xffffffc0083d7c70
[    4.873805] Modules linked in: qca_ssdk(+) gpio_button_hotplug ext4 mbcache jbd2 aquantia hwmon crc_ccitt mii crc32c_generic
[    4.879199] CPU: 1 PID: 534 Comm: kmodloader Tainted: G        W         5.15.148 #0
[    4.890562] Hardware name: Arcadyan AW1000 (DT)
[    4.898282] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    4.902539] pc : 0xffffffc0083d7c70
[    4.909478] lr : 0xffffffc0083d7c70
[    4.912950] sp : ffffffc00987b710
[    4.916421] x29: ffffffc00987b710 x28: ffffffc000977050 x27: 0000000000000008
[    4.919901] x26: 0000000000000000 x25: ffffffc00091c4f4 x24: 00000000000000ff
[    4.927020] x23: 0000000000000000 x22: 000000000000000b x21: 0000000000000016
[    4.934138] x20: ffffff80024c2600 x19: ffffff80024c2600 x18: ffffffc008a77b80
[    4.941255] x17: ffffff8002768ff8 x16: ffffff8002768ff8 x15: 00000000000004c5
[    4.948373] x14: 0000000000000197 x13: ffffffc00987b448 x12: ffffffc008acfb80
[    4.955491] x11: 0000000000000004 x10: ffffffc008acfb80 x9 : 0000000000000000
[    4.962609] x8 : ffffffc008a77b30 x7 : ffffffc008a77b80 x6 : 00000000ffffefff
[    4.969728] x5 : ffffffc008acfb80 x4 : 00000000ffffefff x3 : 0000000000000001
[    4.976847] x2 : ffffffc008a77ae0 x1 : ffffffc008a77ae0 x0 : 0000000000000029
[    4.983965] Call trace:
[    4.991072]  0xffffffc0083d7c70
[    4.993331]  0xffffffc0083da1d4
[    4.996455]  0xffffffc000921748 [qca_ssdk@00000000d7848f78+0x12d000]
[    4.999588]  0xffffffc000922128 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.006184]  0xffffffc000882a20 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.012522]  0xffffffc0009238f8 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.018859]  0xffffffc000923ea4 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.025196]  0xffffffc000985610 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.031532]  0xffffffc008014508
[    5.037862]  0xffffffc0080c14f4
[    5.040727]  0xffffffc0080c2eac
[    5.043851]  0xffffffc0080c3520
[    5.046977]  0xffffffc0080c36bc
[    5.050101]  0xffffffc008022f4c
[    5.053226]  0xffffffc008023060
[    5.056351]  0xffffffc008793308
[    5.059477]  0xffffffc008794128
[    5.062602]  0xffffffc0080115f4
[    5.065727] ---[ end trace ee37508a532c2417 ]---
[    5.068864] ------------[ cut here ]------------
[    5.073721] gcc_uniphy1_port5_rx_clk already unprepared
[    5.078324] WARNING: CPU: 1 PID: 534 at 0xffffffc0083da084
[    5.083267] Modules linked in: qca_ssdk(+) gpio_button_hotplug ext4 mbcache jbd2 aquantia hwmon crc_ccitt mii crc32c_generic
[    5.088834] CPU: 1 PID: 534 Comm: kmodloader Tainted: G        W         5.15.148 #0
[    5.100197] Hardware name: Arcadyan AW1000 (DT)
[    5.107916] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    5.112175] pc : 0xffffffc0083da084
[    5.119113] lr : 0xffffffc0083da084
[    5.122584] sp : ffffffc00987b710
[    5.126057] x29: ffffffc00987b710 x28: ffffffc000977050 x27: 0000000000000008
[    5.129537] x26: 0000000000000000 x25: ffffffc00091c4f4 x24: 00000000000000ff
[    5.136655] x23: 0000000000000000 x22: 000000000000000b x21: 0000000000000016
[    5.143773] x20: 0000000000000000 x19: ffffff80024c2600 x18: ffffffc008a77b80
[    5.150890] x17: ffffff8002768ff8 x16: ffffff8002768ff8 x15: 000000000000053d
[    5.158009] x14: 00000000000001bf x13: ffffffc00987b448 x12: ffffffc008acfb80
[    5.165127] x11: 0000000000000004 x10: ffffffc008acfb80 x9 : 0000000000000000
[    5.172245] x8 : ffffffc008a77b30 x7 : ffffffc008a77b80 x6 : 00000000ffffefff
[    5.179363] x5 : ffffffc008acfb80 x4 : 00000000ffffefff x3 : 0000000000000001
[    5.186481] x2 : ffffffc008a77ae0 x1 : ffffffc008a77ae0 x0 : 000000000000002b
[    5.193600] Call trace:
[    5.200708]  0xffffffc0083da084
[    5.202966]  0xffffffc0083da0d0
[    5.206090]  0xffffffc000921750 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.209222]  0xffffffc000922128 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.215820]  0xffffffc000882a20 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.222157]  0xffffffc0009238f8 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.228493]  0xffffffc000923ea4 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.234830]  0xffffffc000985610 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.241167]  0xffffffc008014508
[    5.247497]  0xffffffc0080c14f4
[    5.250361]  0xffffffc0080c2eac
[    5.253486]  0xffffffc0080c3520
[    5.256611]  0xffffffc0080c36bc
[    5.259737]  0xffffffc008022f4c
[    5.262862]  0xffffffc008023060
[    5.265987]  0xffffffc008793308
[    5.269112]  0xffffffc008794128
[    5.272236]  0xffffffc0080115f4
[    5.275362] ---[ end trace ee37508a532c2418 ]---
[    5.278499] ------------[ cut here ]------------
[    5.283352] gcc_uniphy1_port5_tx_clk already disabled
[    5.287959] WARNING: CPU: 1 PID: 534 at 0xffffffc0083d7c70
[    5.292902] Modules linked in: qca_ssdk(+) gpio_button_hotplug ext4 mbcache jbd2 aquantia hwmon crc_ccitt mii crc32c_generic
[    5.298295] CPU: 1 PID: 534 Comm: kmodloader Tainted: G        W         5.15.148 #0
[    5.309660] Hardware name: Arcadyan AW1000 (DT)
[    5.317378] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    5.321637] pc : 0xffffffc0083d7c70
[    5.328574] lr : 0xffffffc0083d7c70
[    5.332046] sp : ffffffc00987b710
[    5.335519] x29: ffffffc00987b710 x28: ffffffc000977050 x27: 0000000000000008
[    5.338998] x26: 0000000000000000 x25: ffffffc00091c4f4 x24: 00000000000000ff
[    5.346117] x23: 0000000000000000 x22: 000000000000000b x21: 0000000000000017
[    5.353235] x20: ffffff80024c2000 x19: ffffff80024c2000 x18: ffffffc008a77b80
[    5.360353] x17: ffffff8002768ff8 x16: ffffff8002768ff8 x15: 00000000000005b5
[    5.367470] x14: 00000000000001e7 x13: ffffffc00987b448 x12: ffffffc008acfb80
[    5.374590] x11: 0000000000000004 x10: ffffffc008acfb80 x9 : 0000000000000000
[    5.381706] x8 : ffffffc008a77b30 x7 : ffffffc008a77b80 x6 : 00000000ffffefff
[    5.388826] x5 : ffffffc008acfb80 x4 : 00000000ffffefff x3 : 0000000000000001
[    5.395943] x2 : ffffffc008a77ae0 x1 : ffffffc008a77ae0 x0 : 0000000000000029
[    5.403062] Call trace:
[    5.410169]  0xffffffc0083d7c70
[    5.412427]  0xffffffc0083da1d4
[    5.415552]  0xffffffc000921748 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.418684]  0xffffffc000922138 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.425282]  0xffffffc000882a20 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.431619]  0xffffffc0009238f8 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.437956]  0xffffffc000923ea4 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.444292]  0xffffffc000985610 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.450629]  0xffffffc008014508
[    5.456958]  0xffffffc0080c14f4
[    5.459824]  0xffffffc0080c2eac
[    5.462949]  0xffffffc0080c3520
[    5.466073]  0xffffffc0080c36bc
[    5.469199]  0xffffffc008022f4c
[    5.472323]  0xffffffc008023060
[    5.475449]  0xffffffc008793308
[    5.478573]  0xffffffc008794128
[    5.481698]  0xffffffc0080115f4
[    5.484824] ---[ end trace ee37508a532c2419 ]---
[    5.487961] ------------[ cut here ]------------
[    5.492818] gcc_uniphy1_port5_tx_clk already unprepared
[    5.497422] WARNING: CPU: 1 PID: 534 at 0xffffffc0083da084
[    5.502364] Modules linked in: qca_ssdk(+) gpio_button_hotplug ext4 mbcache jbd2 aquantia hwmon crc_ccitt mii crc32c_generic
[    5.507932] CPU: 1 PID: 534 Comm: kmodloader Tainted: G        W         5.15.148 #0
[    5.519295] Hardware name: Arcadyan AW1000 (DT)
[    5.527014] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    5.531272] pc : 0xffffffc0083da084
[    5.538209] lr : 0xffffffc0083da084
[    5.541683] sp : ffffffc00987b710
[    5.545154] x29: ffffffc00987b710 x28: ffffffc000977050 x27: 0000000000000008
[    5.548634] x26: 0000000000000000 x25: ffffffc00091c4f4 x24: 00000000000000ff
[    5.555753] x23: 0000000000000000 x22: 000000000000000b x21: 0000000000000017
[    5.562870] x20: 0000000000000000 x19: ffffff80024c2000 x18: ffffffc008a77b80
[    5.569988] x17: ffffff8002768ff8 x16: ffffff8002768ff8 x15: 000000000000062d
[    5.577106] x14: 000000000000020f x13: ffffffc00987b448 x12: ffffffc008acfb80
[    5.584224] x11: 0000000000000004 x10: ffffffc008acfb80 x9 : 0000000000000000
[    5.591342] x8 : ffffffc008a77b30 x7 : ffffffc008a77b80 x6 : 00000000ffffefff
[    5.598461] x5 : ffffffc008acfb80 x4 : 00000000ffffefff x3 : 0000000000000001
[    5.605579] x2 : ffffffc008a77ae0 x1 : ffffffc008a77ae0 x0 : 000000000000002b
[    5.612696] Call trace:
[    5.619805]  0xffffffc0083da084
[    5.622064]  0xffffffc0083da0d0
[    5.625188]  0xffffffc000921750 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.628321]  0xffffffc000922138 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.634916]  0xffffffc000882a20 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.641254]  0xffffffc0009238f8 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.647590]  0xffffffc000923ea4 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.653928]  0xffffffc000985610 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.660264]  0xffffffc008014508
[    5.666594]  0xffffffc0080c14f4
[    5.669459]  0xffffffc0080c2eac
[    5.672584]  0xffffffc0080c3520
[    5.675710]  0xffffffc0080c36bc
[    5.678834]  0xffffffc008022f4c
[    5.681959]  0xffffffc008023060
[    5.685085]  0xffffffc008793308
[    5.688209]  0xffffffc008794128
[    5.691334]  0xffffffc0080115f4
[    5.694459] ---[ end trace ee37508a532c241a ]---
[    5.697596] ------------[ cut here ]------------
[    5.702449] gcc_uniphy1_port5_rx_clk already disabled
[    5.707056] WARNING: CPU: 1 PID: 534 at 0xffffffc0083d7c70
[    5.711999] Modules linked in: qca_ssdk(+) gpio_button_hotplug ext4 mbcache jbd2 aquantia hwmon crc_ccitt mii crc32c_generic
[    5.717392] CPU: 1 PID: 534 Comm: kmodloader Tainted: G        W         5.15.148 #0
[    5.728757] Hardware name: Arcadyan AW1000 (DT)
[    5.736476] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    5.740734] pc : 0xffffffc0083d7c70
[    5.747671] lr : 0xffffffc0083d7c70
[    5.751143] sp : ffffffc00987b710
[    5.754616] x29: ffffffc00987b710 x28: ffffffc000977050 x27: 0000000000000008
[    5.758096] x26: 0000000000000000 x25: ffffffc00091c4f4 x24: 00000000000000ff
[    5.765214] x23: 0000000000000000 x22: 000000000000000b x21: 0000000000000016
[    5.772332] x20: ffffff80024c2600 x19: ffffff80024c2600 x18: ffffffc008a77b80
[    5.779449] x17: ffffff8002768ff8 x16: ffffff8002768ff8 x15: 00000000000006a5
[    5.786567] x14: 0000000000000237 x13: ffffffc00987b448 x12: ffffffc008acfb80
[    5.793685] x11: 0000000000000004 x10: ffffffc008acfb80 x9 : 0000000000000000
[    5.800803] x8 : ffffffc008a77b30 x7 : ffffffc008a77b80 x6 : 00000000ffffefff
[    5.807922] x5 : ffffffc008acfb80 x4 : 00000000ffffefff x3 : 0000000000000001
[    5.815041] x2 : ffffffc008a77ae0 x1 : ffffffc008a77ae0 x0 : 0000000000000029
[    5.822158] Call trace:
[    5.829266]  0xffffffc0083d7c70
[    5.831525]  0xffffffc0083da1d4
[    5.834650]  0xffffffc000921748 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.837782]  0xffffffc000922128 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.844380]  0xffffffc000882a20 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.850715]  0xffffffc0009238f8 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.857052]  0xffffffc000923ea4 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.863390]  0xffffffc000985610 [qca_ssdk@00000000d7848f78+0x12d000]
[    5.869726]  0xffffffc008014508
[    5.876056]  0xffffffc0080c14f4
[    5.878921]  0xffffffc0080c2eac
[    5.882045]  0xffffffc0080c3520
[    5.885171]  0xffffffc0080c36bc
[    5.888296]  0xffffffc008022f4c
[    5.891421]  0xffffffc008023060
[    5.894546]  0xffffffc008793308
[    5.897671]  0xffffffc008794128
[    5.900795]  0xffffffc0080115f4
[    5.903920] ---[ end trace ee37508a532c241b ]---
[    5.907057] ------------[ cut here ]------------
[    5.911914] gcc_uniphy1_port5_rx_clk already unprepared
[    5.916518] WARNING: CPU: 1 PID: 534 at 0xffffffc0083da084
[    5.921461] Modules linked in: qca_ssdk(+) gpio_button_hotplug ext4 mbcache jbd2 aquantia hwmon crc_ccitt mii crc32c_generic
[    5.927027] CPU: 1 PID: 534 Comm: kmodloader Tainted: G        W         5.15.148 #0
[    5.938393] Hardware name: Arcadyan AW1000 (DT)
[    5.946111] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    5.950369] pc : 0xffffffc0083da084
[    5.957308] lr : 0xffffffc0083da084
[    5.960779] sp : ffffffc00987b710
[    5.964251] x29: ffffffc00987b710 x28: ffffffc000977050 x27: 0000000000000008
[    5.967732] x26: 0000000000000000 x25: ffffffc00091c4f4 x24: 00000000000000ff
[    5.974849] x23: 0000000000000000 x22: 000000000000000b x21: 0000000000000016
[    5.981967] x20: 0000000000000000 x19: ffffff80024c2600 x18: ffffffc008a77b80
[    5.989086] x17: ffffff8002768ff8 x16: ffffff8002768ff8 x15: 000000000000071d
[    5.996204] x14: 000000000000025f x13: ffffffc00987b448 x12: ffffffc008acfb80
[    6.003322] x11: 0000000000000004 x10: ffffffc008acfb80 x9 : 0000000000000000
[    6.010439] x8 : ffffffc008a77b30 x7 : ffffffc008a77b80 x6 : 00000000ffffefff
[    6.017557] x5 : ffffffc008acfb80 x4 : 00000000ffffefff x3 : 0000000000000001
[    6.024675] x2 : ffffffc008a77ae0 x1 : ffffffc008a77ae0 x0 : 000000000000002b
[    6.031794] Call trace:
[    6.038903]  0xffffffc0083da084
[    6.041160]  0xffffffc0083da0d0
[    6.044286]  0xffffffc000921750 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.047418]  0xffffffc000922128 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.054014]  0xffffffc000882a20 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.060352]  0xffffffc0009238f8 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.066688]  0xffffffc000923ea4 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.073025]  0xffffffc000985610 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.079362]  0xffffffc008014508
[    6.085692]  0xffffffc0080c14f4
[    6.088556]  0xffffffc0080c2eac
[    6.091681]  0xffffffc0080c3520
[    6.094806]  0xffffffc0080c36bc
[    6.097931]  0xffffffc008022f4c
[    6.101056]  0xffffffc008023060
[    6.104181]  0xffffffc008793308
[    6.107307]  0xffffffc008794128
[    6.110431]  0xffffffc0080115f4
[    6.113556] ---[ end trace ee37508a532c241c ]---
[    6.116693] ------------[ cut here ]------------
[    6.121545] gcc_uniphy1_port5_tx_clk already disabled
[    6.126153] WARNING: CPU: 1 PID: 534 at 0xffffffc0083d7c70
[    6.131095] Modules linked in: qca_ssdk(+) gpio_button_hotplug ext4 mbcache jbd2 aquantia hwmon crc_ccitt mii crc32c_generic
[    6.136490] CPU: 1 PID: 534 Comm: kmodloader Tainted: G        W         5.15.148 #0
[    6.147855] Hardware name: Arcadyan AW1000 (DT)
[    6.155574] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.159831] pc : 0xffffffc0083d7c70
[    6.166768] lr : 0xffffffc0083d7c70
[    6.170240] sp : ffffffc00987b710
[    6.173712] x29: ffffffc00987b710 x28: ffffffc000977050 x27: 0000000000000008
[    6.177193] x26: 0000000000000000 x25: ffffffc00091c4f4 x24: 00000000000000ff
[    6.184310] x23: 0000000000000000 x22: 000000000000000b x21: 0000000000000017
[    6.191429] x20: ffffff80024c2000 x19: ffffff80024c2000 x18: ffffffc008a77b80
[    6.198548] x17: ffffff8002768ff8 x16: ffffff8002768ff8 x15: 0000000000000795
[    6.205665] x14: 0000000000000287 x13: ffffffc00987b448 x12: ffffffc008acfb80
[    6.212784] x11: 0000000000000004 x10: ffffffc008acfb80 x9 : 0000000000000000
[    6.219901] x8 : ffffffc008a77b30 x7 : ffffffc008a77b80 x6 : 00000000ffffefff
[    6.227020] x5 : ffffffc008acfb80 x4 : 00000000ffffefff x3 : 0000000000000001
[    6.234138] x2 : ffffffc008a77ae0 x1 : ffffffc008a77ae0 x0 : 0000000000000029
[    6.241255] Call trace:
[    6.248364]  0xffffffc0083d7c70
[    6.250622]  0xffffffc0083da1d4
[    6.253747]  0xffffffc000921748 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.256878]  0xffffffc000922138 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.263477]  0xffffffc000882a20 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.269812]  0xffffffc0009238f8 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.276151]  0xffffffc000923ea4 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.282487]  0xffffffc000985610 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.288823]  0xffffffc008014508
[    6.295153]  0xffffffc0080c14f4
[    6.298018]  0xffffffc0080c2eac
[    6.301143]  0xffffffc0080c3520
[    6.304269]  0xffffffc0080c36bc
[    6.307393]  0xffffffc008022f4c
[    6.310517]  0xffffffc008023060
[    6.313644]  0xffffffc008793308
[    6.316768]  0xffffffc008794128
[    6.319893]  0xffffffc0080115f4
[    6.323018] ---[ end trace ee37508a532c241d ]---
[    6.326154] ------------[ cut here ]------------
[    6.331013] gcc_uniphy1_port5_tx_clk already unprepared
[    6.335615] WARNING: CPU: 1 PID: 534 at 0xffffffc0083da084
[    6.340557] Modules linked in: qca_ssdk(+) gpio_button_hotplug ext4 mbcache jbd2 aquantia hwmon crc_ccitt mii crc32c_generic
[    6.346125] CPU: 1 PID: 534 Comm: kmodloader Tainted: G        W         5.15.148 #0
[    6.357489] Hardware name: Arcadyan AW1000 (DT)
[    6.365208] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.369466] pc : 0xffffffc0083da084
[    6.376404] lr : 0xffffffc0083da084
[    6.379876] sp : ffffffc00987b710
[    6.383348] x29: ffffffc00987b710 x28: ffffffc000977050 x27: 0000000000000008
[    6.386828] x26: 0000000000000000 x25: ffffffc00091c4f4 x24: 00000000000000ff
[    6.393947] x23: 0000000000000000 x22: 000000000000000b x21: 0000000000000017
[    6.401065] x20: 0000000000000000 x19: ffffff80024c2000 x18: ffffffc008a77b80
[    6.408183] x17: ffffff8002768ff8 x16: ffffff8002768ff8 x15: 000000000000080d
[    6.415301] x14: 00000000000002af x13: ffffffc00987b448 x12: ffffffc008acfb80
[    6.422419] x11: 0000000000000004 x10: ffffffc008acfb80 x9 : 0000000000000000
[    6.429536] x8 : ffffffc008a77b30 x7 : ffffffc008a77b80 x6 : 00000000ffffefff
[    6.436655] x5 : ffffffc008acfb80 x4 : 00000000ffffefff x3 : 0000000000000001
[    6.443772] x2 : ffffffc008a77ae0 x1 : ffffffc008a77ae0 x0 : 000000000000002b
[    6.450890] Call trace:
[    6.458000]  0xffffffc0083da084
[    6.460258]  0xffffffc0083da0d0
[    6.463382]  0xffffffc000921750 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.466514]  0xffffffc000922138 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.473112]  0xffffffc000882a20 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.479449]  0xffffffc0009238f8 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.485786]  0xffffffc000923ea4 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.492123]  0xffffffc000985610 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.498459]  0xffffffc008014508
[    6.504789]  0xffffffc0080c14f4
[    6.507654]  0xffffffc0080c2eac
[    6.510779]  0xffffffc0080c3520
[    6.513902]  0xffffffc0080c36bc
[    6.517029]  0xffffffc008022f4c
[    6.520153]  0xffffffc008023060
[    6.523278]  0xffffffc008793308
[    6.526404]  0xffffffc008794128
[    6.529528]  0xffffffc0080115f4
[    6.532653] ---[ end trace ee37508a532c241e ]---
[    6.535791] ------------[ cut here ]------------
[    6.540643] gcc_uniphy1_port5_rx_clk already disabled
[    6.545251] WARNING: CPU: 1 PID: 534 at 0xffffffc0083d7c70
[    6.550193] Modules linked in: qca_ssdk(+) gpio_button_hotplug ext4 mbcache jbd2 aquantia hwmon crc_ccitt mii crc32c_generic
[    6.555587] CPU: 1 PID: 534 Comm: kmodloader Tainted: G        W         5.15.148 #0
[    6.566951] Hardware name: Arcadyan AW1000 (DT)
[    6.574671] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.578929] pc : 0xffffffc0083d7c70
[    6.585866] lr : 0xffffffc0083d7c70
[    6.589338] sp : ffffffc00987b710
[    6.592810] x29: ffffffc00987b710 x28: ffffffc000977050 x27: 0000000000000008
[    6.596290] x26: 0000000000000000 x25: ffffffc00091c4f4 x24: 00000000000000ff
[    6.603409] x23: 0000000000000000 x22: 000000000000000b x21: 0000000000000016
[    6.610527] x20: ffffff80024c2600 x19: ffffff80024c2600 x18: ffffffc008a77b80
[    6.617643] x17: ffffff8002768ff8 x16: ffffff8002768ff8 x15: 0000000000000885
[    6.624762] x14: 00000000000002d7 x13: ffffffc00987b448 x12: ffffffc008acfb80
[    6.631880] x11: 0000000000000004 x10: ffffffc008acfb80 x9 : 0000000000000000
[    6.638999] x8 : ffffffc008a77b30 x7 : ffffffc008a77b80 x6 : 00000000ffffefff
[    6.646116] x5 : ffffffc008acfb80 x4 : 00000000ffffefff x3 : 0000000000000001
[    6.653235] x2 : ffffffc008a77ae0 x1 : ffffffc008a77ae0 x0 : 0000000000000029
[    6.660352] Call trace:
[    6.667461]  0xffffffc0083d7c70
[    6.669719]  0xffffffc0083da1d4
[    6.672845]  0xffffffc000921748 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.675976]  0xffffffc000922128 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.682574]  0xffffffc000882a20 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.688910]  0xffffffc0009238f8 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.695247]  0xffffffc000923ea4 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.701585]  0xffffffc000985610 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.707921]  0xffffffc008014508
[    6.714251]  0xffffffc0080c14f4
[    6.717115]  0xffffffc0080c2eac
[    6.720239]  0xffffffc0080c3520
[    6.723364]  0xffffffc0080c36bc
[    6.726491]  0xffffffc008022f4c
[    6.729616]  0xffffffc008023060
[    6.732740]  0xffffffc008793308
[    6.735865]  0xffffffc008794128
[    6.738989]  0xffffffc0080115f4
[    6.742115] ---[ end trace ee37508a532c241f ]---
[    6.745252] ------------[ cut here ]------------
[    6.750105] gcc_uniphy1_port5_rx_clk already unprepared
[    6.754717] WARNING: CPU: 1 PID: 534 at 0xffffffc0083da084
[    6.759655] Modules linked in: qca_ssdk(+) gpio_button_hotplug ext4 mbcache jbd2 aquantia hwmon crc_ccitt mii crc32c_generic
[    6.765223] CPU: 1 PID: 534 Comm: kmodloader Tainted: G        W         5.15.148 #0
[    6.776587] Hardware name: Arcadyan AW1000 (DT)
[    6.784306] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.788564] pc : 0xffffffc0083da084
[    6.795501] lr : 0xffffffc0083da084
[    6.798973] sp : ffffffc00987b710
[    6.802445] x29: ffffffc00987b710 x28: ffffffc000977050 x27: 0000000000000008
[    6.805926] x26: 0000000000000000 x25: ffffffc00091c4f4 x24: 00000000000000ff
[    6.813043] x23: 0000000000000000 x22: 000000000000000b x21: 0000000000000016
[    6.820162] x20: 0000000000000000 x19: ffffff80024c2600 x18: ffffffc008a77b80
[    6.827279] x17: ffffff8002768ff8 x16: ffffff8002768ff8 x15: 00000000000008fd
[    6.834398] x14: 00000000000002ff x13: ffffffc00987b448 x12: ffffffc008acfb80
[    6.841515] x11: 0000000000000004 x10: ffffffc008acfb80 x9 : 0000000000000000
[    6.848634] x8 : ffffffc008a77b30 x7 : ffffffc008a77b80 x6 : 00000000ffffefff
[    6.855751] x5 : ffffffc008acfb80 x4 : 00000000ffffefff x3 : 0000000000000001
[    6.862870] x2 : ffffffc008a77ae0 x1 : ffffffc008a77ae0 x0 : 000000000000002b
[    6.869988] Call trace:
[    6.877096]  0xffffffc0083da084
[    6.879355]  0xffffffc0083da0d0
[    6.882479]  0xffffffc000921750 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.885611]  0xffffffc000922128 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.892210]  0xffffffc000882a20 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.898546]  0xffffffc0009238f8 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.904883]  0xffffffc000923ea4 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.911220]  0xffffffc000985610 [qca_ssdk@00000000d7848f78+0x12d000]
[    6.917555]  0xffffffc008014508
[    6.923886]  0xffffffc0080c14f4
[    6.926750]  0xffffffc0080c2eac
[    6.929875]  0xffffffc0080c3520
[    6.933000]  0xffffffc0080c36bc
[    6.936125]  0xffffffc008022f4c
[    6.939251]  0xffffffc008023060
[    6.942376]  0xffffffc008793308
[    6.945500]  0xffffffc008794128
[    6.948626]  0xffffffc0080115f4
[    6.951750] ---[ end trace ee37508a532c2420 ]---
[    6.954887] ------------[ cut here ]------------
[    6.959741] gcc_uniphy1_port5_tx_clk already disabled
[    6.964348] WARNING: CPU: 1 PID: 534 at 0xffffffc0083d7c70
[    6.969289] Modules linked in: qca_ssdk(+) gpio_button_hotplug ext4 mbcache jbd2 aquantia hwmon crc_ccitt mii crc32c_generic
[    6.974683] CPU: 1 PID: 534 Comm: kmodloader Tainted: G        W         5.15.148 #0
[    6.986048] Hardware name: Arcadyan AW1000 (DT)
[    6.993767] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.998026] pc : 0xffffffc0083d7c70
[    7.004963] lr : 0xffffffc0083d7c70
[    7.008436] sp : ffffffc00987b710
[    7.011907] x29: ffffffc00987b710 x28: ffffffc000977050 x27: 0000000000000008
[    7.015388] x26: 0000000000000000 x25: ffffffc00091c4f4 x24: 00000000000000ff
[    7.022505] x23: 0000000000000000 x22: 000000000000000b x21: 0000000000000017
[    7.029624] x20: ffffff80024c2000 x19: ffffff80024c2000 x18: ffffffc008a77b80
[    7.036742] x17: ffffff8002768ff8 x16: ffffff8002768ff8 x15: 0000000000000975
[    7.043859] x14: 0000000000000327 x13: ffffffc00987b448 x12: ffffffc008acfb80
[    7.050978] x11: 0000000000000004 x10: ffffffc008acfb80 x9 : 0000000000000000
[    7.058095] x8 : ffffffc008a77b30 x7 : ffffffc008a77b80 x6 : 00000000ffffefff
[    7.065213] x5 : ffffffc008acfb80 x4 : 00000000ffffefff x3 : 0000000000000001
[    7.072332] x2 : ffffffc008a77ae0 x1 : ffffffc008a77ae0 x0 : 0000000000000029
[    7.079449] Call trace:
[    7.086559]  0xffffffc0083d7c70
[    7.088817]  0xffffffc0083da1d4
[    7.091942]  0xffffffc000921748 [qca_ssdk@00000000d7848f78+0x12d000]
[    7.095073]  0xffffffc000922138 [qca_ssdk@00000000d7848f78+0x12d000]
[    7.101670]  0xffffffc000882a20 [qca_ssdk@00000000d7848f78+0x12d000]
[    7.108007]  0xffffffc0009238f8 [qca_ssdk@00000000d7848f78+0x12d000]
[    7.114344]  0xffffffc000923ea4 [qca_ssdk@00000000d7848f78+0x12d000]
[    7.120681]  0xffffffc000985610 [qca_ssdk@00000000d7848f78+0x12d000]
[    7.127017]  0xffffffc008014508
[    7.133348]  0xffffffc0080c14f4
[    7.136212]  0xffffffc0080c2eac
[    7.139338]  0xffffffc0080c3520
[    7.142463]  0xffffffc0080c36bc
[    7.145587]  0xffffffc008022f4c
[    7.148712]  0xffffffc008023060
[    7.151837]  0xffffffc008793308
[    7.154962]  0xffffffc008794128
[    7.158087]  0xffffffc0080115f4
[    7.161212] ---[ end trace ee37508a532c2421 ]---
[    7.164349] ------------[ cut here ]------------
[    7.169201] gcc_uniphy1_port5_tx_clk already unprepared
[    7.173814] WARNING: CPU: 1 PID: 534 at 0xffffffc0083da084
[    7.178752] Modules linked in: qca_ssdk(+) gpio_button_hotplug ext4 mbcache jbd2 aquantia hwmon crc_ccitt mii crc32c_generic
[    7.184319] CPU: 1 PID: 534 Comm: kmodloader Tainted: G        W         5.15.148 #0
[    7.195684] Hardware name: Arcadyan AW1000 (DT)
[    7.203403] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    7.207661] pc : 0xffffffc0083da084
[    7.214599] lr : 0xffffffc0083da084
[    7.218071] sp : ffffffc00987b710
[    7.221543] x29: ffffffc00987b710 x28: ffffffc000977050 x27: 0000000000000008
[    7.225023] x26: 0000000000000000 x25: ffffffc00091c4f4 x24: 00000000000000ff
[    7.232140] x23: 0000000000000000 x22: 000000000000000b x21: 0000000000000017
[    7.239258] x20: 0000000000000000 x19: ffffff80024c2000 x18: ffffffc008a77b80
[    7.246377] x17: ffffff8002768ff8 x16: ffffff8002768ff8 x15: 00000000000009ed
[    7.253495] x14: 000000000000034f x13: ffffffc00987b448 x12: ffffffc008acfb80
[    7.260612] x11: 0000000000000004 x10: ffffffc008acfb80 x9 : 0000000000000000
[    7.267731] x8 : ffffffc008a77b30 x7 : ffffffc008a77b80 x6 : 00000000ffffefff
[    7.274849] x5 : ffffffc008acfb80 x4 : 00000000ffffefff x3 : 0000000000000001
[    7.281968] x2 : ffffffc008a77ae0 x1 : ffffffc008a77ae0 x0 : 000000000000002b
[    7.289086] Call trace:
[    7.296194]  0xffffffc0083da084
[    7.298452]  0xffffffc0083da0d0
[    7.301576]  0xffffffc000921750 [qca_ssdk@00000000d7848f78+0x12d000]
[    7.304709]  0xffffffc000922138 [qca_ssdk@00000000d7848f78+0x12d000]
[    7.311305]  0xffffffc000882a20 [qca_ssdk@00000000d7848f78+0x12d000]
[    7.317643]  0xffffffc0009238f8 [qca_ssdk@00000000d7848f78+0x12d000]
[    7.323981]  0xffffffc000923ea4 [qca_ssdk@00000000d7848f78+0x12d000]
[    7.330316]  0xffffffc000985610 [qca_ssdk@00000000d7848f78+0x12d000]
[    7.336654]  0xffffffc008014508
[    7.342984]  0xffffffc0080c14f4
[    7.345848]  0xffffffc0080c2eac
[    7.348973]  0xffffffc0080c3520
[    7.352098]  0xffffffc0080c36bc
[    7.355223]  0xffffffc008022f4c
[    7.358348]  0xffffffc008023060
[    7.361472]  0xffffffc008793308
[    7.364598]  0xffffffc008794128
[    7.367723]  0xffffffc0080115f4
[    7.370847] ---[ end trace ee37508a532c2422 ]---
[    7.597375] adpt_hppe_port_mux_mac_type_set[2787]:WARN:port 6 need not to configure mux and mac type
[    7.597432] ssdk_switch_register[2017]:INFO:Chip version 0x1500
[    7.605573] qca_link_polling_select[1487]:INFO:link-polling-required node does not exist
[    7.611214] ssdk_switch_register[2043]:INFO:polling is selected
[    7.619539] regi_init[3957]:INFO:Initializing HPPE Done!!
[    7.625274] ssdk_genl_init[211]:INFO:ssdk genl family register success.
[    7.630740] regi_init[4020]:INFO:qca-ssdk module init succeeded!
[    7.638832] EDMA ver 1 hw init
[    7.643639] EDMA HW Reset completed succesfully
[    7.646301] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)
[    7.650697] RxDesc:1 (15-15) RxFill:1 (7-7)
[    7.656884] Generic PHY 90000.mdio-1:00: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:00, irq=POLL)
[    7.660572] nss-dp 3a001000.dp1 lan1: Registered netdev lan1(qcom-id:1)
[    7.670531] Generic PHY 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL)
[    7.676710] nss-dp 3a001200.dp2 lan2: Registered netdev lan2(qcom-id:2)
[    7.686664] Generic PHY 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL)
[    7.692841] nss-dp 3a001400.dp3 lan3: Registered netdev lan3(qcom-id:3)
[    7.702871] Generic PHY 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL)
[    7.709006] nss-dp 3a001600.dp4 lan4: Registered netdev lan4(qcom-id:4)
[    7.719062] Generic PHY 90000.mdio-1:1c: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:1c, irq=POLL)
[    7.725190] nss-dp 3a007000.dp6-syn wan: Registered netdev wan(qcom-id:6)
[    7.734489] **********************************************************
[    7.741158] * NSS Data Plane driver
[    7.747569] **********************************************************
[    7.751833] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.758015] fsl-ehci: Freescale EHCI Host controller driver
[    7.764602] ehci-platform: EHCI generic platform driver
[    7.779560] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    7.779606] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[    7.784129] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000002010010
[    7.791539] xhci-hcd xhci-hcd.1.auto: irq 94, io mem 0x08a00000
[    7.800958] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    7.806781] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[    7.812336] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    7.820320] hub 1-0:1.0: USB hub found
[    7.826582] hub 1-0:1.0: 1 port detected
[    7.830452] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    7.834599] hub 2-0:1.0: USB hub found
[    7.842384] hub 2-0:1.0: 1 port detected
[    7.846226] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    7.850008] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
[    7.855445] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000002010010
[    7.862896] xhci-hcd xhci-hcd.2.auto: irq 95, io mem 0x08c00000
[    7.872316] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    7.878126] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
[    7.883691] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
[    7.891698] hub 3-0:1.0: USB hub found
[    7.897857] hub 3-0:1.0: 1 port detected
[    7.901885] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    7.905884] hub 4-0:1.0: USB hub found
[    7.913927] hub 4-0:1.0: 1 port detected
[    7.918881] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    7.926896] init: - preinit -
[   10.358817] UBIFS (ubi0:2): default file-system created
[   10.359300] UBIFS (ubi0:2): Mounting in unauthenticated mode
[   10.363020] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 782
[   10.458545] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
[   10.458594] UBIFS (ubi0:2): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
[   10.465396] UBIFS (ubi0:2): FS size: 63488000 bytes (60 MiB, 250 LEBs), max 260 LEBs, journal size 3301376 bytes (3 MiB, 13 LEBs)
[   10.475280] UBIFS (ubi0:2): reserved for root: 2998695 bytes (2928 KiB)
[   10.486902] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 1017E309-77E7-4785-9035-E7D25E46AA02, small LPT model
[   10.491126] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[   10.506445] mount_root: overlay filesystem has not been fully initialized yet
[   10.511485] mount_root: switching to ubifs overlay
[   10.520799] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[   10.524749] urandom-seed: Seed file not found (/etc/urandom.seed)
[   10.577227] procd: - early -
[   10.577329] procd: - watchdog -
[   11.185456] procd: - watchdog -
[   11.187221] procd: - ubus -
[   11.238322] procd: - init -
[   11.520548] kmodloader: loading kernel modules from /etc/modules.d/*
[   11.585754] NET: Registered PF_ALG protocol family
[   11.590132] tun: Universal TUN/TAP device driver, 1.6
[   11.593706] gre: GRE over IPv4 demultiplexor driver
[   11.595436] ip_gre: GRE over IPv4 tunneling driver
[   11.607790] usbcore: registered new interface driver cdc_acm
[   11.607825] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   11.613720] usbcore: registered new interface driver cdc_wdm
[   11.619646] urngd: v1.0.2 started.
[   11.626337] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b
[   11.629364] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36
[   11.647247] NET: Registered PF_QIPCRTR protocol family
[   11.654338] usbcore: registered new interface driver usbserial_generic
[   11.654396] usbserial: USB Serial support registered for generic
[   11.660659] usbcore: registered new interface driver cdc_ether
[   11.667194] usbcore: registered new interface driver cdc_ncm
[   11.687488] usbcore: registered new interface driver huawei_cdc_ncm
[   11.728788] PPP generic driver version 2.4.2
[   11.729641] PPP MPPE Compression module registered
[   11.734270] NET: Registered PF_PPPOX protocol family
[   11.737519] PPTP driver version 0.8.5
[   13.206045] qmi_wwan 4-1:1.4: cdc-wdm0: USB WDM device
[   13.206657] qmi_wwan 4-1:1.4 wwan0: register 'qmi_wwan' at usb-xhci-hcd.2.auto-1, WWAN/QMI device, 16:47:2a:80:5e:db
[   13.210252] usbcore: registered new interface driver qmi_wwan
[   13.221924] usbcore: registered new interface driver rndis_host
[   13.227405] usbcore: registered new interface driver sierra
[   13.232261] usbserial: USB Serial support registered for Sierra USB modem
[   13.238722] usbcore: registered new interface driver sierra_net
[   13.247450] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[   13.250365] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   13.265538] ath11k c000000.wifi: ipq8074 hw2.0
[   13.267894] ath11k c000000.wifi: FW memory mode: 0
[   13.272764] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
[   13.277529] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
[   14.357040] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
[   14.358638] usbcore: registered new interface driver cdc_mbim
[   14.365570] usbcore: registered new interface driver option
[   14.369176] usbserial: USB Serial support registered for GSM modem (1-port)
[   14.374684] option 4-1:1.0: GSM modem (1-port) converter detected
[   14.381623] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB0
[   14.387940] option 4-1:1.1: GSM modem (1-port) converter detected
[   14.394756] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB1
[   14.400759] option 4-1:1.2: GSM modem (1-port) converter detected
[   14.401156] ath11k c000000.wifi: qmi ignore invalid mem req type 3
[   14.407616] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB2
[   14.419053] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0x270 soc_id 0xffffffff
[   14.419682] option 4-1:1.3: GSM modem (1-port) converter detected
[   14.426399] ath11k c000000.wifi: fw_version 0x290c84a5 fw_build_timestamp 2023-03-25 07:34 fw_build_id WLAN.HK.2.9.0.1-01385-QCAHKSWPL_SILICONZ-1
[   14.435093] usb 4-1: GSM modem (1-port) converter now attached to ttyUSB3
[   14.455942] usbcore: registered new interface driver qcserial
[   14.460826] usbserial: USB Serial support registered for Qualcomm USB modem
[   14.466833] kmodloader: done loading kernel modules from /etc/modules.d/*
[   15.016811] ath11k c000000.wifi: htt event 48 not handled

19 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Arcadyan AW1000

Więc "tak se". Działać działa ale wykłada qca_ssdk, więc coś jeszcze w kernelu 5.15 wymaga poprawienia. Cóż, bez sprzętu trudno działać, więc zostawiam tak jak jest - jak ktoś będzie chciał to niech używa, a za rogiem czeka nowa wersja więc to niech będzie tylko jako testy.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

20 Odpowiedź przez secam7

  • secam7
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-02-19
  • Posty: 432

Odp: Arcadyan AW1000

Mnie tam nie przeszkadza, póki działa.

Tak wygląda menu "więcej parametrów":
https://i.ibb.co/dpYpMz9/Zrzut-ekranu-z-2024-03-09-13-32-30.png

Tak ma być?

21 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Arcadyan AW1000

Tak przeprojektowałem ostatnio mifi, tak ma to wyglądać.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

22 Odpowiedź przez secam7

  • secam7
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-02-19
  • Posty: 432

Odp: Arcadyan AW1000

Mam jeszcze jedną prośbę, brakuje jednego repozytorium i nie da się modułów kernelowych instalować:

Downloading https://dl.eko.one.pl/openwrt-23.05/packages/aarch64_cortex-a53/telephony/Packages.gz
Updated list of available packages in /var/opkg-lists/eko1_telephony
Downloading https://dl.eko.one.pl/openwrt-23.05/packages/aarch64_cortex-a53/telephony/Packages.sig
Signature check passed.
Downloading https://dl.eko.one.pl/openwrt-23.05/targets/ipq807x/generic/kmods-5.15.148/Packages.gz
*** Failed to download the package list from https://dl.eko.one.pl/openwrt-23.05/targets/ipq807x/generic/kmods-5.15.148/Packages.gz

Collected errors:
 * opkg_download: Failed to download https://dl.eko.one.pl/openwrt-23.05/targets/ipq807x/generic/kmods-5.15.148/Packages.gz, wget returned 8.

23 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Arcadyan AW1000

To był obraz testowy. Ja własnie ładuje nowe i wszystko będzie na swoim miejscu za kilka minut.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

24 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Arcadyan AW1000

Już.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

25 Odpowiedź przez MiG25

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,793

Odp: Arcadyan AW1000

Nie umiemy zczytywać parametrów sygnału z 5G ( bo ten n78 nic nie podaje) ?