Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Sprzęt / Hardware → ZTE MF289F - Porting OpenWRT
Strony Poprzednia 1 … 32 33 34 35 36 … 45 Następna
Zaloguj się lub zarejestruj by napisać odpowiedź
@smereka
another user has finally found hardware EDL point for that module
here is it:
Just short these two pins each other until attached to USB port, it will popup as 9008 in Windows\Linux
many many thanks to checkin665 for this gift on year's last day 
And this is very good news for the end of the year 
Will you write how to nourish it from the dead using qpst? Alternatively, if it is the same as mf286d, please just provide the appropriate files in packages and I will write the instructions.
And this is very good news for the end of the year
if we use QFIL (instead of SB3.0) it will be more easily to flash
Let me work on repack stuff, now that I've HW EDL is it more easy to flash
Fajnie, że wyprowadzili w tym modelu blisko łącza mpcie. Mam 3 modemy zdechnięte od innego modelu być może nawet i ZTE więc posprawdzam sobie te piny. A nóż któryś to EDL boot point
Fajnie, że wyprowadzili w tym modelu blisko łącza mpcie. Mam 3 modemy zdechnięte od innego modelu być może nawet i ZTE więc posprawdzam sobie te piny. A nóż któryś to EDL boot point
have you tested into an mPCIe slot? because on it's original router is in USB3.0
I put the remaining modems to converter mpcie to USB adapter
@smereka another use has finally found hardware EDL for that module
many many thanks to checkin665 for this last day of this year
Good job.
But can you tell what exacly do ? There are to arrows to 2 points ? Booth of this points should be grounded to get it to EDL ?
Or one arrow is from some point of USB plug ? Doeas it mean to connect there 5V ? Orher GND ?
oh sorry, you're right
just short them to each other while plug the module into USB port, when you get 9008 COM you can remove the short
Happy New Year, do you have any compiled 289f firmware with the functional plugins already installed? (cell lock bands lock at commands)
Will you be releasing a method and tool for flashing the module on the 9008?
oh sorry, you're right
just short them to each other while plug the module into USB port, when you get 9008 COM you can remove the short
working in progress...
Need to finish rawprogram0.xml to test it with QFIL.
Hope tomorrow to make a test flash to see what will happens (these files are reworked from an Vodafone IT AT.1 file, just boot\kernel\modem are from Vodafone DE)
From my experience with MC7010/801A, some of them can be "swapped" between units
Will you be releasing a method and tool for flashing the module on the 9008?
stich86 napisał/a:oh sorry, you're right
just short them to each other while plug the module into USB port, when you get 9008 COM you can remove the short
when it's done yes, also repack files for the dump that i've (Vodafone IT AT1\AT2, Vodafone DE, T-Mobile PL), otherwise istructions are useless
hello I have 50 messages, in theory 50% of the memory but if I try to receive other messages the memory behaves as if it was full
good news guys
EDL recovery was succesfull, so my repack files are good.
Now i've to clean up QCN and check next steps to bring module back to it's normal operation
Hope to finish it tomorrow 
ok guys.. as promised i've put all infos into my GIT repo
https://github.com/stich86/ZTE-MF289F-R … /tree/main
let's take a look, if you find any issues\imperfection feel free to open a PR\Issue so I can fix it
ok guys.. as promised i've put all infos into my GIT repo
https://github.com/stich86/ZTE-MF289F-R … /tree/main
let's take a look, if you find any issues\imperfection feel free to open a PR\Issue so I can fix it
Thank you very much.
Just a quick question, do you have the openwrt firmware for the 289f? The one with the plugin. bands lock cell lock
!!BE AWARE GUYS!!
we have found with MiG25 that swapping firmware on the module will break LED and RJ-11 port
Now we are trying to understand why..
stich86 can you take a look here and reply to me there?
Ill take a look later
Can someone send me a “ps w” of a MF286/289 modem over adb?
Thanks
ok i've found the "issue", tested with MiG25 and now leds\rj11 works again
PLEASE DON'T DOWNLOAD the current images from Mega.
I've to fix all SYSFS and upload them again
I let you know when done
Issue fixed, i've updated sysfs on Mega
Thanks again to MiG25 for the testing!
stich86 can you take a look here and reply to me there?
Not all modules use that pins to enter in 9008 mode, sometimes is the pin 4 with 5 one, sometise 6 pin but check before the tension because some pin are vcc and gnd and you can burn something, I would try using the mf289f to short pins with a high resistor to see how high the resistance can be to get it into 9008 mode then use that resistor for testing.
Ps can anyone help me with the sms memory?
Ps can anyone help me with the sms memory?
Just remove old messages?
smereka napisał/a:stich86 can you take a look here and reply to me there?
Not all modules use that pins to enter in 9008 mode, sometimes is the pin 4 with 5 one, sometise 6 pin but check before the tension because some pin are vcc and gnd and you can burn something, I would try using the mf289f to short pins with a high resistor to see how high the resistance can be to get it into 9008 mode then use that resistor for testing.
Ps can anyone help me with the sms memory?
Nice consideration.
Make your check, so in case I can update the git
Yes , resistor ( like 10kOhm) would be good to check , since here for sure point 4 ( counting from left on the picture ) is definetly VCC ( so 3,3V) ,and you pulling up Point 1 (EDL ).
Strony Poprzednia 1 … 32 33 34 35 36 … 45 Następna
Zaloguj się lub zarejestruj by napisać odpowiedź
eko.one.pl → Sprzęt / Hardware → ZTE MF289F - Porting OpenWRT
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc