51 Odpowiedź przez GChmurka (edytowany przez GChmurka 2023-07-21 09:11:40)

  • Zarejestrowany: 2023-03-12
  • Posty: 20

Odp: ZTE T3000

wkleisz zawaettość

bootlog
cat /proc/mtd

52 Odpowiedź przez MiG25

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE T3000

Listę partycji masz w poście 11.
Zobaczę,czy bootlog coś wypluje.

No i john rippuje hasło już ósmy dzień (to wiekowy juz i5 ,cztery wątki )

53 Odpowiedź przez frutis (edytowany przez frutis 2023-07-21 11:20:37)

  • frutis
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2009-11-10
  • Posty: 1,697

Odp: ZTE T3000

MiG25 napisał/a:

EDIT2:Dopiero po wpisie zauważyłem ,że są dwa slashe , ale po poprawce jest to samo:

root@(none):/# mkdir /tmp/katalog
root@(none):/# mount -t ubifs /dev/ubi0_4 /tmp/katalog
[   33.933470] UBIFS (ubi0:4): static UBI volume - read-only mode
[   33.933702] UBIFS error (ubi0:4 pid 163): mount_ubifs: cannot mount read-write - read-only media
[   33.946459] UBIFS (ubi0:4): static UBI volume - read-only mode
mount: mounting /dev/ubi0_4 on /tmp/katalog failed: Invalid argument
root@(none):/#

A tak da się zamontować:

mount -t ubifs -o ro /dev/ubi0_4 /tmp/katalog

?
Ubi volume jak ma Type: static to jest ro, Type: dynamic jest rw

54 Odpowiedź przez MiG25 (edytowany przez MiG25 2023-07-21 12:43:50)

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE T3000

Też się ne da (choć montowanie jako ro niewiele da, dobrze byłoby coś móc pozmieniać ):

root@(none):/# mount -t ubifs -o ro /dev/ubi0_4 /tmp/katalog
[   39.785196] UBIFS (ubi0:4): static UBI volume - read-only mode
mount: mounting /dev/ubi0_4 on /tmp/katalog failed: Invalid argument
root@(none):/#

@GChmurka , takiej komendy jak bootlog nie rozpoznaje

55 Odpowiedź przez m80 (edytowany przez m80 2023-07-21 15:19:24)

  • m80
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-04-27
  • Posty: 269

Odp: ZTE T3000

@MiG25 działa na nim sysupgrade?
Można by zrobić backup plików, przenieść go na PC, zmienić albo usunąć hasło roota z shadow a potem wgrać go ponownie?


EDIT: hmm, raczej to się nie uda bez mount_root:/


Jeszcze taki sposób...

mount -o remount,rw /tmp/katalog

Chyba też nie zadziała bo:

static UBI volume - read-only mode

vol_type=static => tylko RO
vol_type=dynamic => RW + RO

56 Odpowiedź przez MiG25

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE T3000

W takim czymś to musi być coś przypisane do /tmp/katalog ...

root@(none):/# mkdir /tmp/katalog
root@(none):/# mount -o remount,rw /tmp/katalog
mount: can't find /tmp/katalog in /proc/mounts
root@(none):/#

Komenda mount_root jest , ale nic się nie dzieje

root@(none):/# mount_root
[  290.173252] mount_root: mounting /dev/root
root@(none):/# ls /dev/root

Komenda sysupgrade jest , ale nie ma jak ściągnąć plik i to zrobić.
W tym trybie failsafe nie działa nawet lan , usb sprzęt nie ma....

57 Odpowiedź przez GChmurka (edytowany przez GChmurka 2023-07-21 20:36:47)

  • Zarejestrowany: 2023-03-12
  • Posty: 20

Odp: ZTE T3000

Łaowałeś te moduły wszystkie?

Jedz w pętli kilka razy, bo może być tak, że potrzeba czegoś co się będzie ładować w pętli później, coś na zasadzie jednolinijkowca....

for i in `ls /lib/modules/4.4.60/*`; do insmod /lib/modules/4.4.60/$i ;done

Może wtedy się pojawi sieciówka...

Za Ethernet prawdopodobnie odpowiada

qca-nss-drv.ko

W bootlog

[   21.417061] qca-nss 7a00000.nss: Direct firmware load for qca-nss0.bin failed with error -2
[   21.417096] qca-nss 7a00000.nss: Falling back to user helper
/lib/firmware/qca-nss0.bin 33
[   22.436460] nss_driver - fw of size 761676  bytes copied to load addr: 40000000, nss_id : 0

58 Odpowiedź przez MiG25

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE T3000

Co do qca-nss-drv.ko to ładowanie nie powiodło się :

root@(none):/# insmod qca-nss-drv.ko
[   35.704656] qca_nss_drv: Unknown symbol nss_dp_is_in_open_state (err 0)
[   35.704888] qca_nss_drv: Unknown symbol nss_dp_start_data_plane (err 0)
[   35.710130] qca_nss_drv: Unknown symbol nss_dp_get_netdev_by_nss_if_num (err 0)
[   35.716745] qca_nss_drv: Unknown symbol nss_dp_receive (err 0)
[   35.724031] qca_nss_drv: Unknown symbol nss_dp_override_data_plane (err 0)
[   35.730027] qca_nss_drv: Unknown symbol nss_dp_restore_data_plane (err 0)
[   35.767171] insmod: failed to insert /lib/modules/4.4.60/qca-nss-drv.ko

59 Odpowiedź przez MiG25

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE T3000

Natomiast po wydaniu Twojej komendy do załoadowania wszystkich modółów pojawiły się urządzenia ifb0 i ifb1 , ale po podniesieniu tych urządzeń nawet ping do nich nie jest wysyłany ( jakby się wszystko wiesza , nie da się przerwać procesu ...)

root@(none):/# ifconfig -a
bond0     Link encap:Ethernet  HWaddr F6:17:EB:29:63:31
          BROADCAST MASTER MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

ifb0      Link encap:Ethernet  HWaddr 66:E8:B1:A9:45:24
          BROADCAST NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:32
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

ifb1      Link encap:Ethernet  HWaddr 2E:19:9F:92:50:50
          BROADCAST NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:32
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback
          LOOPBACK  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

teql0     Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

root@(none):/# ifconfig ifb1 192.168.1.1
root@(none):/# ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.

60 Odpowiedź przez MiG25

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE T3000

Nie ,żaden z tych macadresów nie wygląda podobnie do obudowy..
Po włożeniu kable do portu ( tutaj 3 ) taki log się pojawia:

root@(none):/# ifconfig ifb0 up
root@(none):/# ifconfig
ifb0      Link encap:Ethernet  HWaddr A6:2F:57:26:ED:A1
          inet6 addr: fe80::a42f:57ff:fe26:eda1/64 Scope:Link
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:3 errors:0 dropped:3 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:32
          RX bytes:210 (210.0 B)  TX bytes:0 (0.0 B)

root@(none):/# [  108.708048] qca_ar8327_sw_mac_polling_task, 718, port 3 link up speed 2, duplex 1
[  108.708078] zte_notify_link_change_to_router_user[82]:INFO:port 3 link=1 speed 2, duplex 1 path_len=100
[  108.708078]  shell=/sbin/eth_up_down_signal.sh
[  108.893215] input port_number=3; port_status=1
[  108.899887] !!!! pre_port_status=error: init nvram error
[  108.899887] error: nvram_api.c, 251
[  109.014274] @@ pre_port_status=error: init nvram error
[  109.014274] error: nvram_api.c, 251;port_status =1;wan_number =
[  109.014461] post_port_status=
[  109.024445] /sbin/eth_up_down_signal.sh: done ...
[  109.027780] zte_notify_link_change_to_router_user[120]:INFO:result = 0

spróbuję włożyć do serwera dhcp...

61 Odpowiedź przez GChmurka (edytowany przez GChmurka 2023-07-21 22:33:55)

  • Zarejestrowany: 2023-03-12
  • Posty: 20

Odp: ZTE T3000

ok doczytalem ifbX to interfejsy do kształtowania ruchu to sa wirtualne jak bond

a pokaż co masz w /etc/modules/ pewnie tam gdziesz masz

options ifb numifbs=2

dlatego powstały 2


oraz czy masz ten plik:
/lib/firmware/qca-nss0.bin

bo to chyba firmware do sterownika sieciówek, przynajmniej to pokazuje dmesg ze jest wykorzystane podczas bootowania

62 Odpowiedź przez MiG25

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE T3000

chodzi o modules.d ?

root@(none):/# ls /etc/modules.d
02-crypto-hash            40-ata-ahci-platform      73-sched
04-crypto-crc32c          40-bonding                80-fuse
09-crypto-aead            40-fs-msdos               80-zte_check_privateip
09-crypto-arc4            40-scsi-core              arptables
09-crypto-authenc         40-usb2                   ipt-TRIGGER
09-crypto-cbc             41-ata-ahci               ipt-conntrack
09-crypto-deflate         42-ip6tables              ipt-conntrack-extra
09-crypto-des             42-rmnet-nss              ipt-core
09-crypto-ecb             44-zte_genl_kernel        ipt-extra
09-crypto-hmac            45-usb-gadget             ipt-filter
09-crypto-md5             45-usb-phy-ipq5018        ipt-ipopt
09-crypto-ocf             49-ipt-ipset              ipt-iprange
09-crypto-pcompress       50-emesh-sp               ipt-ipsec
09-crypto-rng             50-ipt-ct-sctp            ipt-nat
09-crypto-sha1            50-qca-ovsmgr             ipt-nathelper-rtsp
09-crypto-wq              50-usb-lib-composite      ipt-webstr
09-shortcut-fe            51-i2c-core               lib-crc-ccitt
10-crypto-iv              51-nat-sctp               lib-crc32c
10-shortcut-fe-drv        51-qca-hyfi-bridge        lib-lzo
13-vxlan                  51-qca-nss-drv-gre        lib-textsearch
15-mii                    51-qca-nss-drv-l2tpv2     lib-zlib
20-usb-core               51-qca-nss-drv-lag-mgr    mppe
21-regmap                 51-qca-nss-drv-map-t      nf-conntrack
25-nls-cp437              51-qca-nss-drv-pppoe      nf-conntrack6
25-nls-iso8859-1          51-qca-nss-drv-pptp       nf-ipt
30-cfg80211-linux         51-qca-nss-drv-vxlanmgr   nf-ipt6
30-fs-configfs            52-diag-char              nf-nat
30-fs-ntfs                52-qca-mcs                nf-nat6
30-fs-vfat                52-qca-nss-crypto         nf-nathelper
30-ipsec                  52-qca-nss-macsec         nf-nathelper-extra
30-qca-ssdk-nohnat        52-usb-f-diag             nfnetlink
30-sound-core             52-usb-f-qdss             openvswitch
31-iptunnel               53-bt_tty                 ppp
31-iptunnel4              53-usb-dwc3-qcom          pppoe
31-iptunnel6              54-usb-dwc3               pppol2tp
31-qca-nss-dp             54-usb3                   pptp
32-ip6-tunnel             55-sound-soc-core         usb-acm
32-ipsec4                 56-bootconfig             usb-net
32-ipsec6                 58-qca-nss-drv-qdisc      usb-net-cdc-ether
32-l2tp                   59-qca-nss-cfi-cryptoapi  usb-net-qmi-wwan
32-qca-nss-drv            60-leds-gpio              usb-net-rndis
32-sit                    60-qca-nss-drv-ipsecmgr   usb-serial
32-udptunnel4             60-qca-nss-drv-tun6rd     usb-serial-option
32-udptunnel6             60-qca-nss-drv-tunipip6   usb-serial-wwan
33-nat46                  61-qca-nss-cfi-ocf        usb-storage
34-ifb                    70-ikconfig               usb-uas
39-gre
root@(none):/#

63 Odpowiedź przez GChmurka (edytowany przez GChmurka 2023-07-21 23:51:05)

  • Zarejestrowany: 2023-03-12
  • Posty: 20

Odp: ZTE T3000

a zawartość wszystkich tych plików pokażesz, tam są opcje do ładowania modułów, numerki to pewnie kolejność jak są ładowane..

coś takiego np.:

for i in `ls /etc/modules.d/* ; do echo "######  $i  #####"; cat /etc/modules.d/$i ; echo "##############" ;done

innsmod ładuje modyły nie patrząc na parametry w konfigu, wszystko trzbea podać z lini komend.
modprobe załaduje ładnie z konfigami

może uda się to załadować tak jak sobie ładują podczas normalnego rozruchu....

w sumie to byś mogł spróbować na czysto po resecie spróvowac ładować mniej więcej takim jednolinjkowcem:

for i in `ls /etc/modules.d/*|grep -e "[[:digit:]]\-"| sort  |cut -d"-" -f 2-`; do modprobe $i ; done

Będzie to ładować w kolejności tych numerków wszystkie moduły modprobem. zadziała pod warunkiem, że moduły nazywają się tak samo jak pliki xx-nazwamodulu gdzie xx to numerki..

64 Odpowiedź przez MiG25 (edytowany przez MiG25 2023-07-22 12:28:09)

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE T3000

Dobra ,tak to chyba miało wyglądać(poprawiłem tam delikatnie składnie,nie był domknięty ten jednokreskowy cudzysłów , śieżka przy cat nie potrzebna):

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2023.07.22 13:15:17 =~=~=~=~=~=~=~=~=~=~=~=
for i in `ls /etc/modules.d/*` ; do echo "######  $i  #####"; cat
 $i ; echo "##############" ;done
######  /etc/modules.d/02-crypto-hash  #####
crypto_hash
##############
######  /etc/modules.d/04-crypto-crc32c  #####
crc32c_generic
##############
######  /etc/modules.d/09-crypto-aead  #####
aead
##############
######  /etc/modules.d/09-crypto-arc4  #####
arc4
##############
######  /etc/modules.d/09-crypto-authenc  #####
authenc
##############
######  /etc/modules.d/09-crypto-cbc  #####
cbc
##############
######  /etc/modules.d/09-crypto-deflate  #####
deflate
##############
######  /etc/modules.d/09-crypto-des  #####
des_generic
##############
######  /etc/modules.d/09-crypto-ecb  #####
ecb
##############
######  /etc/modules.d/09-crypto-hmac  #####
hmac
##############
######  /etc/modules.d/09-crypto-md5  #####
md5
##############
######  /etc/modules.d/09-crypto-ocf  #####
ocf
cryptodev
cryptosoft
##############
######  /etc/modules.d/09-crypto-pcompress  #####
pcompress
##############
######  /etc/modules.d/09-crypto-rng  #####
rng
##############
######  /etc/modules.d/09-crypto-sha1  #####
sha1_generic
##############
######  /etc/modules.d/09-crypto-wq  #####
crypto_wq
##############
######  /etc/modules.d/09-shortcut-fe  #####
shortcut-fe
shortcut-fe-ipv6
##############
######  /etc/modules.d/10-crypto-iv  #####
eseqiv
chainiv
##############
######  /etc/modules.d/10-shortcut-fe-drv  #####
shortcut-fe-drv
##############
######  /etc/modules.d/13-vxlan  #####
vxlan
##############
######  /etc/modules.d/15-mii  #####
mii
##############
######  /etc/modules.d/20-usb-core  #####
usb-common
usbcore
##############
######  /etc/modules.d/21-regmap  #####
regmap-core
regmap-i2c
regmap-spi
##############
######  /etc/modules.d/25-nls-cp437  #####
nls_cp437
##############
######  /etc/modules.d/25-nls-iso8859-1  #####
nls_iso8859-1
##############
######  /etc/modules.d/30-cfg80211-linux  #####
cfg80211
##############
######  /etc/modules.d/30-fs-configfs  #####
configfs
##############
######  /etc/modules.d/30-fs-ntfs  #####
ntfs
##############
######  /etc/modules.d/30-fs-vfat  #####
fat
vfat
##############
######  /etc/modules.d/30-ipsec  #####
xfrm_algo
xfrm_ipcomp
xfrm_user
af_key
##############
######  /etc/modules.d/30-qca-ssdk-nohnat  #####
qca-ssdk
##############
######  /etc/modules.d/30-sound-core  #####
soundcore
snd
snd-hwdep
snd-seq-device
snd-rawmidi
snd-timer
snd-pcm
snd-mixer-oss
snd-pcm-oss
snd-compress
##############
######  /etc/modules.d/31-iptunnel  #####
ip_tunnel
##############
######  /etc/modules.d/31-iptunnel4  #####
tunnel4
##############
######  /etc/modules.d/31-iptunnel6  #####
tunnel6
##############
######  /etc/modules.d/31-qca-nss-dp  #####
qca-nss-dp
##############
######  /etc/modules.d/32-ip6-tunnel  #####
ip6_tunnel
##############
######  /etc/modules.d/32-ipsec4  #####
ah4
esp4
xfrm4_mode_beet
xfrm4_mode_transport
xfrm4_mode_tunnel
xfrm4_tunnel
ipcomp
##############
######  /etc/modules.d/32-ipsec6  #####
ah6
esp6
xfrm6_mode_beet
xfrm6_mode_transport
xfrm6_mode_tunnel
xfrm6_tunnel
ipcomp6
##############
######  /etc/modules.d/32-l2tp  #####
l2tp_core
l2tp_netlink
##############
######  /etc/modules.d/32-qca-nss-drv  #####
qca-nss-drv
##############
######  /etc/modules.d/32-sit  #####
sit
##############
######  /etc/modules.d/32-udptunnel4  #####
udp_tunnel
##############
######  /etc/modules.d/32-udptunnel6  #####
ip6_udp_tunnel
##############
######  /etc/modules.d/33-nat46  #####
nat46
##############
######  /etc/modules.d/34-ifb  #####
ifb
##############
######  /etc/modules.d/39-gre  #####
gre
ip_gre
##############
######  /etc/modules.d/39-gre6  #####
ip6_gre
##############
######  /etc/modules.d/40-ata-ahci-platform  #####
libahci_platform
ahci_platform
##############
######  /etc/modules.d/40-bonding  #####
bonding
##############
######  /etc/modules.d/40-fs-msdos  #####
msdos
##############
######  /etc/modules.d/40-scsi-core  #####
scsi_mod
sd_mod
##############
######  /etc/modules.d/40-usb2  #####
ehci-hcd
ehci-platform
ehci-orion
ehci-atmel
##############
######  /etc/modules.d/41-ata-ahci  #####
libahci
ahci
##############
######  /etc/modules.d/42-ip6tables  #####
ip6table_filter
ip6table_mangle
ip6table_raw
nf_log_ipv6
ip6t_REJECT
nf_reject_ipv6
##############
######  /etc/modules.d/42-rmnet-nss  #####
rmnet-nss
##############
######  /etc/modules.d/44-zte_genl_kernel  #####
zte_genl_kernel
##############
######  /etc/modules.d/45-usb-gadget  #####
udc-core
##############
######  /etc/modules.d/45-usb-phy-ipq5018  #####
phy-qca-m31
phy-qca-uniphy
##############
######  /etc/modules.d/49-ipt-ipset  #####
ip_set
ip_set_bitmap_ip
ip_set_bitmap_ipmac
ip_set_bitmap_port
ip_set_hash_ip
ip_set_hash_ipmark
ip_set_hash_ipport
ip_set_hash_ipportip
ip_set_hash_ipportnet
ip_set_hash_mac
ip_set_hash_netportnet
ip_set_hash_net
ip_set_hash_netnet
ip_set_hash_netport
ip_set_hash_netiface
ip_set_list_set
xt_set
##############
######  /etc/modules.d/50-emesh-sp  #####
emesh-sp
##############
######  /etc/modules.d/50-ipt-ct-sctp  #####
nf_conntrack_proto_sctp
##############
######  /etc/modules.d/50-qca-ovsmgr  #####
qca-ovsmgr
##############
######  /etc/modules.d/50-usb-lib-composite  #####
libcomposite
##############
######  /etc/modules.d/51-i2c-core  #####
i2c-core
i2c-dev
##############
######  /etc/modules.d/51-nat-sctp  #####
nf_nat_proto_sctp
##############
######  /etc/modules.d/51-qca-hyfi-bridge  #####
hyfi-bridging
##############
######  /etc/modules.d/51-qca-nss-drv-gre  #####
qca-nss-gre
##############
######  /etc/modules.d/51-qca-nss-drv-l2tpv2  #####
qca-nss-l2tpv2
##############
######  /etc/modules.d/51-qca-nss-drv-lag-mgr  #####
qca-nss-lag-mgr
##############
######  /etc/modules.d/51-qca-nss-drv-map-t  #####
qca-nss-map-t
##############
######  /etc/modules.d/51-qca-nss-drv-pppoe  #####
qca-nss-pppoe
##############
######  /etc/modules.d/51-qca-nss-drv-pptp  #####
qca-nss-pptp
##############
######  /etc/modules.d/51-qca-nss-drv-vxlanmgr  #####
qca-nss-vxlanmgr
##############
######  /etc/modules.d/52-diag-char  #####
diagchar
##############
######  /etc/modules.d/52-qca-mcs  #####
qca-mcs
##############
######  /etc/modules.d/52-qca-nss-crypto  #####
qca-nss-crypto
##############
######  /etc/modules.d/52-qca-nss-macsec  #####
qca-nss-macsec
##############
######  /etc/modules.d/52-usb-f-diag  #####
usb_f_diag
##############
######  /etc/modules.d/52-usb-f-qdss  #####
usb_f_qdss
##############
######  /etc/modules.d/53-bt_tty  #####
bt_rproc
##############
######  /etc/modules.d/53-usb-dwc3-qcom  #####
dwc3-qcom
dbm
##############
######  /etc/modules.d/54-usb-dwc3  #####
dwc3
##############
######  /etc/modules.d/54-usb3  #####
xhci-hcd
xhci-pci
xhci-plat-hcd
##############
######  /etc/modules.d/55-sound-soc-core  #####
snd-soc-core
##############
######  /etc/modules.d/56-bootconfig  #####
bootconfig
##############
######  /etc/modules.d/58-qca-nss-drv-qdisc  #####
qca-nss-qdisc
##############
######  /etc/modules.d/59-qca-nss-cfi-cryptoapi  #####
qca-nss-cfi-cryptoapi
##############
######  /etc/modules.d/60-leds-gpio  #####
leds-gpio
##############
######  /etc/modules.d/60-qca-nss-drv-ipsecmgr  #####
qca-nss-ipsecmgr
##############
######  /etc/modules.d/60-qca-nss-drv-tun6rd  #####
qca-nss-tun6rd
##############
######  /etc/modules.d/60-qca-nss-drv-tunipip6  #####
qca-nss-tunipip6
##############
######  /etc/modules.d/61-qca-nss-cfi-ocf  #####
qca-nss-cfi-ocf
##############
######  /etc/modules.d/70-ikconfig  #####
configs
##############
######  /etc/modules.d/70-sched-core  #####
sch_ingress
sch_fq_codel
sch_hfsc
cls_fw
cls_route
cls_flow
cls_tcindex
cls_u32
em_u32
act_mirred
act_skbedit
##############
######  /etc/modules.d/71-sched-connmark  #####
act_connmark
##############
######  /etc/modules.d/73-sched  #####
sch_red
sch_fq
sch_sfq
sch_tbf
sch_codel
act_police
em_text
cls_basic
sch_htb
em_meta
sch_gred
act_ipt
sch_dsmark
sch_pie
sch_prio
em_nbyte
sch_teql
em_cmp
##############
######  /etc/modules.d/80-fuse  #####
fuse
##############
######  /etc/modules.d/80-zte_check_privateip  #####
zte_check_privateip
##############
######  /etc/modules.d/arptables  #####
arp_tables
arpt_mangle
arptable_filter
##############
######  /etc/modules.d/ipt-TRIGGER  #####
nf_tee
ipt_TRIGGER
##############
######  /etc/modules.d/ipt-conntrack  #####
xt_state
iptable_raw
xt_CT
xt_conntrack
##############
######  /etc/modules.d/ipt-conntrack-extra  #####
xt_connbytes
xt_connlimit
xt_connmark
xt_helper
xt_recent
##############
######  /etc/modules.d/ipt-core  #####
xt_tcpudp
iptable_filter
iptable_mangle
xt_limit
xt_mac
xt_multiport
xt_comment
xt_id
xt_LOG
nf_log_common
nf_log_ipv4
xt_TCPMSS
ipt_REJECT
nf_reject_ipv4
xt_time
xt_mark
##############
######  /etc/modules.d/ipt-extra  #####
xt_addrtype
xt_owner
xt_physdev
xt_pkttype
xt_quota
##############
######  /etc/modules.d/ipt-filter  #####
xt_string
##############
######  /etc/modules.d/ipt-ipopt  #####
xt_dscp
xt_DSCP
xt_length
xt_statistic
xt_tcpmss
xt_CLASSIFY
ipt_ECN
xt_ecn
xt_hl
xt_HL
##############
######  /etc/modules.d/ipt-iprange  #####
xt_iprange
##############
######  /etc/modules.d/ipt-ipsec  #####
ipt_ah
xt_esp
xt_policy
##############
######  /etc/modules.d/ipt-nat  #####
xt_nat
nf_nat_redirect
iptable_nat
ipt_MASQUERADE
nf_nat_masquerade_ipv4
xt_REDIRECT
##############
######  /etc/modules.d/ipt-nathelper-rtsp  #####
nf_conntrack_rtsp
nf_nat_rtsp
##############
######  /etc/modules.d/ipt-webstr  #####
nf_tee
##############
######  /etc/modules.d/lib-crc-ccitt  #####
crc-ccitt
##############
######  /etc/modules.d/lib-crc32c  #####
libcrc32c
##############
######  /etc/modules.d/lib-lzo  #####
lzo_compress
lzo_decompress
##############
######  /etc/modules.d/lib-textsearch  #####
ts_kmp
ts_bm
ts_fsm
##############
######  /etc/modules.d/lib-zlib  #####
zlib_deflate
zlib_inflate
##############
######  /etc/modules.d/mppe  #####
ppp_mppe
##############
######  /etc/modules.d/nf-conntrack  #####
nf_conntrack
nf_conntrack_rtcache
nf_defrag_ipv4
nf_conntrack_ipv4
##############
######  /etc/modules.d/nf-conntrack6  #####
nf_defrag_ipv6
nf_conntrack_ipv6
##############
######  /etc/modules.d/nf-ipt  #####
ip_tables
x_tables
##############
######  /etc/modules.d/nf-ipt6  #####
ip6_tables
##############
######  /etc/modules.d/nf-nat  #####
nf_nat
nf_nat_ipv4
##############
######  /etc/modules.d/nf-nat6  #####
nf_nat_ipv6
##############
######  /etc/modules.d/nf-nathelper  #####
nf_conntrack_ftp
nf_nat_ftp
##############
######  /etc/modules.d/nf-nathelper-extra  #####
nf_conntrack_broadcast
nf_conntrack_amanda
nf_nat_amanda
nf_conntrack_proto_gre
nf_nat_proto_gre
nf_conntrack_h323
nf_nat_h323
nf_conntrack_pptp
nf_nat_pptp
nf_conntrack_sip
nf_nat_sip
nf_conntrack_snmp
nf_nat_snmp_basic
nf_conntrack_tftp
nf_nat_tftp
nf_conntrack_irc
nf_nat_irc
##############
######  /etc/modules.d/nfnetlink  #####
nfnetlink
##############
######  /etc/modules.d/openvswitch  #####
/home/zte/ci/workspace/Soft4_T3000G_PLK_CPE/build_folder/qsdk/build_dir/target-arm_cortex-a7_musl-1.1.16_eabi/linux-ipq_ipq50xx/linux-4.4.60/net/openvswitch/openvswitch
##############
######  /etc/modules.d/ppp  #####
ppp_async
##############
######  /etc/modules.d/pppoe  #####
pppoe
##############
######  /etc/modules.d/pppol2tp  #####
l2tp_ppp
##############
######  /etc/modules.d/pptp  #####
pptp
##############
######  /etc/modules.d/usb-acm  #####
cdc-acm
##############
######  /etc/modules.d/usb-net  #####
usbnet
##############
######  /etc/modules.d/usb-net-cdc-ether  #####
cdc_ether
##############
######  /etc/modules.d/usb-net-qmi-wwan  #####
qmi_wwan
##############
######  /etc/modules.d/usb-net-rndis  #####
rndis_host
##############
######  /etc/modules.d/usb-serial  #####
usbserial
##############
######  /etc/modules.d/usb-serial-option  #####
option
##############
######  /etc/modules.d/usb-serial-wwan  #####
usb_wwan
##############
######  /etc/modules.d/usb-storage  #####
usb-storage
##############
######  /etc/modules.d/usb-uas  #####
uas
##############
######  /etc/modules.d/usb-wdm  #####
cdc-wdm
##############
######  /etc/modules.d/usbmon  #####
usbmon
##############
root@(none):/#

65 Odpowiedź przez MiG25

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE T3000

Natomiast po wykonaniu tej jednej linijki z modeprobe  ,większość jest failed , po tym nawet kabel ethernet nie reaguje.

root@(none):/# for i in `ls /etc/modules.d/*|grep -e "[[:digit:]]\-"| sort  |cut
 -d"-" -f 2-`; do modprobe $i ; done
[   14.220543] modprobe: failed to find a module named crypto-hash
[   14.240154] modprobe: failed to find a module named crypto-crc32c
[   14.259854] modprobe: failed to find a module named crypto-aead
[   14.279137] modprobe: failed to find a module named crypto-arc4
[   14.298605] modprobe: failed to find a module named crypto-authenc
[   14.317903] modprobe: failed to find a module named crypto-cbc
[   14.337268] modprobe: failed to find a module named crypto-deflate
[   14.356512] modprobe: failed to find a module named crypto-des
[   14.375622] modprobe: failed to find a module named crypto-ecb
[   14.394804] modprobe: failed to find a module named crypto-hmac
[   14.414202] modprobe: failed to find a module named crypto-md5
[   14.433710] modprobe: failed to find a module named crypto-ocf
[   14.453060] modprobe: failed to find a module named crypto-pcompress
[   14.472724] modprobe: failed to find a module named crypto-rng
[   14.491642] modprobe: failed to find a module named crypto-sha1
[   14.510501] modprobe: failed to find a module named crypto-wq
[   14.553924] modprobe: failed to find a module named crypto-iv
[   14.573595] shortcut_fe_drv: Unknown symbol sfe_ipv6_create_rule (err 0)
[   14.573656] shortcut_fe_drv: Unknown symbol sfe_ipv6_destroy_rule (err 0)
[   14.579752] shortcut_fe_drv: Unknown symbol sfe_ipv6_register_sync_rule_callback (err 0)
[   14.586148] shortcut_fe_drv: Unknown symbol sfe_ipv6_recv (err 0)
[   14.594230] shortcut_fe_drv: Unknown symbol sfe_ipv6_destroy_all_rules_for_dev (err 0)
[   14.626517] modprobe: 1 module could not be probed
[   14.626634] modprobe: - shortcut-fe-drv
[   14.671560] modprobe: mii is already loaded
[   14.690723] modprobe: failed to find a module named usb-core
[   14.709801] modprobe: failed to find a module named regmap
[   14.767464] modprobe: failed to find a module named cfg80211-linux
[   14.786848] modprobe: failed to find a module named fs-configfs
[   14.806051] modprobe: failed to find a module named fs-ntfs
[   14.825375] modprobe: failed to find a module named fs-vfat
[   14.844385] modprobe: failed to find a module named ipsec
[   14.863562] modprobe: failed to find a module named qca-ssdk-nohnat
[   14.882565] modprobe: failed to find a module named sound-core
[   14.901730] modprobe: failed to find a module named iptunnel
[   14.920879] modprobe: failed to find a module named iptunnel4
[   14.939967] modprobe: failed to find a module named iptunnel6
[   14.959952] qca_nss_dp: Unknown symbol fal_mib_port_flush_counters (err 0)
[   14.960065] qca_nss_dp: Unknown symbol fal_port_max_frame_size_set (err 0)
[   14.965792] qca_nss_dp: Unknown symbol fal_port_interface_eee_cfg_set (err 0)
[   14.972786] qca_nss_dp: Unknown symbol fal_port_max_frame_size_get (err 0)
[   14.980143] qca_nss_dp: Unknown symbol fal_port_interface_eee_cfg_get (err 0)
[   15.016532] modprobe: 1 module could not be probed
[   15.016649] modprobe: - qca-nss-dp
[   15.061229] modprobe: failed to find a module named ipsec4
[   15.080200] modprobe: failed to find a module named ipsec6
[   15.099059] modprobe: failed to find a module named l2tp
[   15.228509] qca_nss_drv: Unknown symbol nss_dp_is_in_open_state (err 0)
[   15.228748] qca_nss_drv: Unknown symbol nss_dp_start_data_plane (err 0)
[   15.233952] qca_nss_drv: Unknown symbol nss_dp_get_netdev_by_nss_if_num (err 0)
[   15.240629] qca_nss_drv: Unknown symbol nss_dp_receive (err 0)
[   15.247991] qca_nss_drv: Unknown symbol nss_dp_override_data_plane (err 0)
[   15.253804] qca_nss_drv: Unknown symbol nss_dp_restore_data_plane (err 0)
[   15.287155] modprobe: 1 module could not be probed
[   15.287271] modprobe: - qca-nss-drv
[   15.312544] sit: IPv6 over IPv4 tunneling driver
[   15.332049] modprobe: failed to find a module named udptunnel4
[   15.351282] modprobe: failed to find a module named udptunnel6
[   15.372514] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded.
[   15.412727] gre: GRE over IPv4 demultiplexor driver
[   15.431589] modprobe: failed to find a module named gre6
[   15.450494] modprobe: failed to find a module named ata-ahci-platform
[   15.479285] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[   15.500636] modprobe: failed to find a module named fs-msdos
[   15.519316] modprobe: failed to find a module named scsi-core
[   15.537908] modprobe: failed to find a module named usb2
[   15.556551] modprobe: failed to find a module named ata-ahci
[   15.574884] modprobe: failed to find a module named ip6tables
[   15.593557] rmnet_nss: Unknown symbol nss_rmnet_rx_create (err 0)
[   15.593631] rmnet_nss: Unknown symbol nss_rmnet_rx_destroy_sync (err 0)
[   15.598717] rmnet_nss: Unknown symbol nss_rmnet_rx_tx_buf (err 0)
[   15.605092] rmnet_nss: Unknown symbol nss_rmnet_rx_xmit_callback_register (err 0)
[   15.611387] rmnet_nss: Unknown symbol nss_rmnet_rx_xmit_callback_unregister (err 0)
[   15.618816] rmnet_nss: Unknown symbol nss_rmnet_rx_register (err 0)
[   15.656502] modprobe: 1 module could not be probed
[   15.656618] modprobe: - rmnet_nss
[   15.678581] zte_genl_kernel: Unknown symbol nss_dp_set_ethernet_status (err 0)
[   15.706519] modprobe: 1 module could not be probed
[   15.706656] modprobe: - zte_genl_kernel
[   15.728632] modprobe: failed to find a module named usb-gadget
[   15.747456] modprobe: failed to find a module named usb-phy-ipq5018
[   15.765776] modprobe: failed to find a module named ipt-ipset
[   15.803389] modprobe: failed to find a module named ipt-ct-sctp
[   15.827601] nf_conntrack version 0.5.0 (5936 buckets, 23744 max)
[   15.832680] openvswitch: Open vSwitch switching datapath
[   15.853304] modprobe: failed to find a module named usb-lib-composite
[   15.871761] modprobe: failed to find a module named i2c-core
[   15.889897] modprobe: failed to find a module named nat-sctp
[   15.908493] modprobe: failed to find a module named qca-hyfi-bridge
[   15.926732] modprobe: failed to find a module named qca-nss-drv-gre
[   15.945053] modprobe: failed to find a module named qca-nss-drv-l2tpv2
[   15.963691] modprobe: failed to find a module named qca-nss-drv-lag-mgr
[   15.982072] modprobe: failed to find a module named qca-nss-drv-map-t
[   16.000410] modprobe: failed to find a module named qca-nss-drv-pppoe
[   16.019087] modprobe: failed to find a module named qca-nss-drv-pptp
[   16.037573] modprobe: failed to find a module named qca-nss-drv-vxlanmgr
[   16.056265] modprobe: failed to find a module named diag-char
[   16.076884] QCA multicast snooping installed successfully
[   16.095735] qca_nss_crypto: Unknown symbol nss_crypto_cmn_tx_msg_sync (err 0)
[   16.095829] qca_nss_crypto: Unknown symbol nss_crypto_cmn_data_register (err 0)
[   16.102017] qca_nss_crypto: Unknown symbol nss_crypto_cmn_notify_register (err 0)
[   16.109190] qca_nss_crypto: Unknown symbol nss_cmn_msg_init (err 0)
[   16.116725] qca_nss_crypto: Unknown symbol nss_crypto_cmn_tx_buf (err 0)
[   16.146526] modprobe: 1 module could not be probed
[   16.146640] modprobe: - qca-nss-crypto
[   16.180413] cannot find nss-macsec0 node
[   16.180487] nss-macsec1 DT exist!
[   16.183458] cannot find nss-macsec2 node
[   16.186650] nss_macsec init success
[   16.251596] modprobe: failed to find a module named bt_tty
[   16.269599] modprobe: failed to find a module named usb-dwc3-qcom
[   16.287616] modprobe: failed to find a module named usb-dwc3
[   16.305706] modprobe: failed to find a module named usb3
[   16.323728] modprobe: failed to find a module named sound-soc-core
[   16.341958] modprobe: bootconfig is already loaded
[   16.360225] modprobe: failed to find a module named qca-nss-drv-qdisc
[   16.380345] qca_nss_cfi_cryptoapi: Unknown symbol nss_crypto_unregister_user (err 0)
[   16.380436] qca_nss_cfi_cryptoapi: Unknown symbol nss_crypto_transform_payload (err 0)
[   16.387340] qca_nss_cfi_cryptoapi: Unknown symbol nss_crypto_hdr_map_sglist (err 0)
[   16.394940] qca_nss_cfi_cryptoapi: Unknown symbol nss_crypto_hdr_map_sglist_ahash (err 0)
[   16.402618] qca_nss_cfi_cryptoapi: Unknown symbol nss_crypto_session_alloc (err 0)
[   16.410949] qca_nss_cfi_cryptoapi: Unknown symbol nss_crypto_algo_is_supp (err 0)
[   16.418308] qca_nss_cfi_cryptoapi: Unknown symbol nss_crypto_session_free (err 0)
[   16.425821] qca_nss_cfi_cryptoapi: Unknown symbol nss_crypto_hdr_free (err 0)
[   16.433344] qca_nss_cfi_cryptoapi: Unknown symbol nss_crypto_hdr_alloc (err 0)
[   16.440432] qca_nss_cfi_cryptoapi: Unknown symbol nss_crypto_register_user (err 0)
[   16.477008] qca_nss_cfi_cryptoapi: Unknown symbol nss_crypto_unregister_user (err 0)
[   16.477096] qca_nss_cfi_cryptoapi: Unknown symbol nss_crypto_transform_payload (err 0)
[   16.483857] qca_nss_cfi_cryptoapi: Unknown symbol nss_crypto_hdr_map_sglist (err 0)
[   16.491706] qca_nss_cfi_cryptoapi: Unknown symbol nss_crypto_hdr_map_sglist_ahash (err 0)
[   16.499253] qca_nss_cfi_cryptoapi: Unknown symbol nss_crypto_session_alloc (err 0)
[   16.507542] qca_nss_cfi_cryptoapi: Unknown symbol nss_crypto_algo_is_supp (err 0)
[   16.514920] qca_nss_cfi_cryptoapi: Unknown symbol nss_crypto_session_free (err 0)
[   16.522511] qca_nss_cfi_cryptoapi: Unknown symbol nss_crypto_hdr_free (err 0)
[   16.529999] qca_nss_cfi_cryptoapi: Unknown symbol nss_crypto_hdr_alloc (err 0)
[   16.537075] qca_nss_cfi_cryptoapi: Unknown symbol nss_crypto_register_user (err 0)
[   16.566524] modprobe: 1 module could not be probed
[   16.566636] modprobe: - qca-nss-cfi-cryptoapi
[   16.588117] modprobe: leds-gpio is already loaded
[   16.605928] modprobe: failed to find a module named qca-nss-drv-ipsecmgr
[   16.623974] modprobe: failed to find a module named qca-nss-drv-tun6rd
[   16.642344] modprobe: failed to find a module named qca-nss-drv-tunipip6
[   16.716606] qca_nss_cfi_ocf: Unknown symbol nss_crypto_unregister_user (err 0)
[   16.716681] qca_nss_cfi_ocf: Unknown symbol nss_crypto_transform_payload (err 0)
[   16.722809] qca_nss_cfi_ocf: Unknown symbol nss_crypto_session_alloc (err 0)
[   16.730428] qca_nss_cfi_ocf: Unknown symbol nss_crypto_algo_is_supp (err 0)
[   16.737425] qca_nss_cfi_ocf: Unknown symbol nss_crypto_session_free (err 0)
[   16.744018] qca_nss_cfi_ocf: Unknown symbol nss_crypto_hdr_free (err 0)
[   16.751088] qca_nss_cfi_ocf: Unknown symbol nss_crypto_hdr_map_skb (err 0)
[   16.757594] qca_nss_cfi_ocf: Unknown symbol nss_crypto_hdr_alloc (err 0)
[   16.764501] qca_nss_cfi_ocf: Unknown symbol nss_crypto_register_user (err 0)
[   16.796595] qca_nss_cfi_ocf: Unknown symbol nss_crypto_unregister_user (err 0)
[   16.796668] qca_nss_cfi_ocf: Unknown symbol nss_crypto_transform_payload (err 0)
[   16.802798] qca_nss_cfi_ocf: Unknown symbol nss_crypto_session_alloc (err 0)
[   16.810407] qca_nss_cfi_ocf: Unknown symbol nss_crypto_algo_is_supp (err 0)
[   16.817394] qca_nss_cfi_ocf: Unknown symbol nss_crypto_session_free (err 0)
[   16.824010] qca_nss_cfi_ocf: Unknown symbol nss_crypto_hdr_free (err 0)
[   16.831065] qca_nss_cfi_ocf: Unknown symbol nss_crypto_hdr_map_skb (err 0)
[   16.837581] qca_nss_cfi_ocf: Unknown symbol nss_crypto_hdr_alloc (err 0)
[   16.844493] qca_nss_cfi_ocf: Unknown symbol nss_crypto_register_user (err 0)
[   16.876512] modprobe: 1 module could not be probed
[   16.876623] modprobe: - qca-nss-cfi-ocf
[   16.898083] modprobe: failed to find a module named ikconfig
[   16.915934] modprobe: failed to find a module named sched-core
[   16.933915] modprobe: failed to find a module named sched-connmark
[   16.952349] modprobe: failed to find a module named sched
[   16.975357] fuse init (API version 7.23)
root@(none):/#

66 Odpowiedź przez GChmurka (edytowany przez GChmurka 2023-07-22 19:23:07)

  • Zarejestrowany: 2023-03-12
  • Posty: 20

Odp: ZTE T3000

A co jest w /etc/init.d
Może jest jakiś skryty który załaduje te wszystkie moduły w odpowiedniej kolejności?

Mizesz też spróbować tak ładować wszystko z plików, bo widzę że w środku są nazwy modułów zależnych...
Więc coś takiego...
Zrobiłem aby działało z każdego miejsca...

for i in `ls /etc/modules.d/*|grep -e "[[:digit:]]\-"| sort `; do for x in `cat /etc/modules.d/$i`; do modprobe $x;done ; done

67 Odpowiedź przez MiG25

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE T3000

Pewnie dlatego ,że wycina cyfry to nie wykonuje tego:

root@(none):/# for i in `ls /etc/modules.d/*|grep -e "[[:digit:]]\-"| sort  |cut
 -d"-" -f 2-`; do for x in `cat /etc/modules.d/$i`; do modprobe $x;done ; done
cat: can't open '/etc/modules.d/crypto-hash': No such file or directory
cat: can't open '/etc/modules.d/crypto-crc32c': No such file or directory
cat: can't open '/etc/modules.d/crypto-aead': No such file or directory
cat: can't open '/etc/modules.d/crypto-arc4': No such file or directory
cat: can't open '/etc/modules.d/crypto-authenc': No such file or directory
cat: can't open '/etc/modules.d/crypto-cbc': No such file or directory
cat: can't open '/etc/modules.d/crypto-deflate': No such file or directory
cat: can't open '/etc/modules.d/crypto-des': No such file or directory
cat: can't open '/etc/modules.d/crypto-ecb': No such file or directory
cat: can't open '/etc/modules.d/crypto-hmac': No such file or directory
cat: can't open '/etc/modules.d/crypto-md5': No such file or directory
cat: can't open '/etc/modules.d/crypto-ocf': No such file or directory
cat: can't open '/etc/modules.d/crypto-pcompress': No such file or directory
cat: can't open '/etc/modules.d/crypto-rng': No such file or directory
cat: can't open '/etc/modules.d/crypto-sha1': No such file or directory
cat: can't open '/etc/modules.d/crypto-wq': No such file or directory
cat: can't open '/etc/modules.d/shortcut-fe': No such file or directory
cat: can't open '/etc/modules.d/crypto-iv': No such file or directory
cat: can't open '/etc/modules.d/shortcut-fe-drv': No such file or directory
cat: can't open '/etc/modules.d/vxlan': No such file or directory
cat: can't open '/etc/modules.d/mii': No such file or directory
cat: can't open '/etc/modules.d/usb-core': No such file or directory
cat: can't open '/etc/modules.d/regmap': No such file or directory
cat: can't open '/etc/modules.d/nls-cp437': No such file or directory
cat: can't open '/etc/modules.d/nls-iso8859-1': No such file or directory
cat: can't open '/etc/modules.d/cfg80211-linux': No such file or directory
cat: can't open '/etc/modules.d/fs-configfs': No such file or directory
cat: can't open '/etc/modules.d/fs-ntfs': No such file or directory
cat: can't open '/etc/modules.d/fs-vfat': No such file or directory
cat: can't open '/etc/modules.d/ipsec': No such file or directory
cat: can't open '/etc/modules.d/qca-ssdk-nohnat': No such file or directory
cat: can't open '/etc/modules.d/sound-core': No such file or directory
cat: can't open '/etc/modules.d/iptunnel': No such file or directory
cat: can't open '/etc/modules.d/iptunnel4': No such file or directory
cat: can't open '/etc/modules.d/iptunnel6': No such file or directory
cat: can't open '/etc/modules.d/qca-nss-dp': No such file or directory
cat: can't open '/etc/modules.d/ip6-tunnel': No such file or directory
cat: can't open '/etc/modules.d/ipsec4': No such file or directory
cat: can't open '/etc/modules.d/ipsec6': No such file or directory
cat: can't open '/etc/modules.d/l2tp': No such file or directory
cat: can't open '/etc/modules.d/qca-nss-drv': No such file or directory
cat: can't open '/etc/modules.d/sit': No such file or directory
cat: can't open '/etc/modules.d/udptunnel4': No such file or directory
cat: can't open '/etc/modules.d/udptunnel6': No such file or directory
cat: can't open '/etc/modules.d/nat46': No such file or directory
cat: can't open '/etc/modules.d/ifb': No such file or directory
cat: can't open '/etc/modules.d/gre': No such file or directory
cat: can't open '/etc/modules.d/gre6': No such file or directory
cat: can't open '/etc/modules.d/ata-ahci-platform': No such file or directory
cat: can't open '/etc/modules.d/bonding': No such file or directory
cat: can't open '/etc/modules.d/fs-msdos': No such file or directory
cat: can't open '/etc/modules.d/scsi-core': No such file or directory
cat: can't open '/etc/modules.d/usb2': No such file or directory
cat: can't open '/etc/modules.d/ata-ahci': No such file or directory
cat: can't open '/etc/modules.d/ip6tables': No such file or directory
cat: can't open '/etc/modules.d/rmnet-nss': No such file or directory
cat: can't open '/etc/modules.d/zte_genl_kernel': No such file or directory
cat: can't open '/etc/modules.d/usb-gadget': No such file or directory
cat: can't open '/etc/modules.d/usb-phy-ipq5018': No such file or directory
cat: can't open '/etc/modules.d/ipt-ipset': No such file or directory
cat: can't open '/etc/modules.d/emesh-sp': No such file or directory
cat: can't open '/etc/modules.d/ipt-ct-sctp': No such file or directory
cat: can't open '/etc/modules.d/qca-ovsmgr': No such file or directory
cat: can't open '/etc/modules.d/usb-lib-composite': No such file or directory
cat: can't open '/etc/modules.d/i2c-core': No such file or directory
cat: can't open '/etc/modules.d/nat-sctp': No such file or directory
cat: can't open '/etc/modules.d/qca-hyfi-bridge': No such file or directory
cat: can't open '/etc/modules.d/qca-nss-drv-gre': No such file or directory
cat: can't open '/etc/modules.d/qca-nss-drv-l2tpv2': No such file or directory
cat: can't open '/etc/modules.d/qca-nss-drv-lag-mgr': No such file or directory
cat: can't open '/etc/modules.d/qca-nss-drv-map-t': No such file or directory
cat: can't open '/etc/modules.d/qca-nss-drv-pppoe': No such file or directory
cat: can't open '/etc/modules.d/qca-nss-drv-pptp': No such file or directory
cat: can't open '/etc/modules.d/qca-nss-drv-vxlanmgr': No such file or directory
cat: can't open '/etc/modules.d/diag-char': No such file or directory
cat: can't open '/etc/modules.d/qca-mcs': No such file or directory
cat: can't open '/etc/modules.d/qca-nss-crypto': No such file or directory
cat: can't open '/etc/modules.d/qca-nss-macsec': No such file or directory
cat: can't open '/etc/modules.d/usb-f-diag': No such file or directory
cat: can't open '/etc/modules.d/usb-f-qdss': No such file or directory
cat: can't open '/etc/modules.d/bt_tty': No such file or directory
cat: can't open '/etc/modules.d/usb-dwc3-qcom': No such file or directory
cat: can't open '/etc/modules.d/usb-dwc3': No such file or directory
cat: can't open '/etc/modules.d/usb3': No such file or directory
cat: can't open '/etc/modules.d/sound-soc-core': No such file or directory
cat: can't open '/etc/modules.d/bootconfig': No such file or directory
cat: can't open '/etc/modules.d/qca-nss-drv-qdisc': No such file or directory
cat: can't open '/etc/modules.d/qca-nss-cfi-cryptoapi': No such file or directory
cat: can't open '/etc/modules.d/leds-gpio': No such file or directory
cat: can't open '/etc/modules.d/qca-nss-drv-ipsecmgr': No such file or directory
cat: can't open '/etc/modules.d/qca-nss-drv-tun6rd': No such file or directory
cat: can't open '/etc/modules.d/qca-nss-drv-tunipip6': No such file or directory
cat: can't open '/etc/modules.d/qca-nss-cfi-ocf': No such file or directory
cat: can't open '/etc/modules.d/ikconfig': No such file or directory
cat: can't open '/etc/modules.d/sched-core': No such file or directory
cat: can't open '/etc/modules.d/sched-connmark': No such file or directory
cat: can't open '/etc/modules.d/sched': No such file or directory
cat: can't open '/etc/modules.d/fuse': No such file or directory
cat: can't open '/etc/modules.d/zte_check_privateip': No such file or directory
root@(none):/#

W ./etc/init.d jest :

root@(none):/# ls /etc/init.d
alsa                log                 qrtr
autorole            macsec              radvd
boot                mcproxy             repacd
boot-ftm            mcsd                rngd
breakpad            modem-monitor       rpcd
cnss_diag           multiwan            rstp
cron                netmgrd             shortcut-fe
ddns                network             skb_recycler
diag_socket_app     openssl             ssid_steering
done                powerctl            sysctl
ezmesh              pppoe-server        sysfixtime
firewall            qca-acfg            sysstat
ftm                 qca-hostapd         system
hyd                 qca-nss-drv         telnet
hyfi-bridging       qca-nss-ecm         thermal
igmpproxy           qca-nss-ipsec       uhttpd
inetd               qca-nss-mirred      umount
ipqcm               qca-ssdk            wifi_fw_done
lbd                 qca-wpa-supplicant  wifi_fw_mount
led                 qcmbr               wsplcd
lldpd               qnicornd            zte_init.sh
root@(none):/#

68 Odpowiedź przez GChmurka (edytowany przez GChmurka 2023-07-22 19:34:06)

  • Zarejestrowany: 2023-03-12
  • Posty: 20

Odp: ZTE T3000

Poprawiłem, wywalić cut starczyło.

W init.d ten plik pokaz
qca-nss-drv

Mizesz też pokazać /etc/rc.d interesuje mnie rc.d 3 bo domyślny runlevel.
Tam będzie kolejność jak te skrypty są łaowałeś. Dokładnie nie podałem ścieżki, bo może być w miejscu w etc, ale ogólnie szukaj /etc/rc.d/rc3.d

69 Odpowiedź przez MiG25 (edytowany przez MiG25 2023-07-22 19:43:43)

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE T3000

Dobra , tak to trzeba było pewnie zrobić:

root@(none):/# for i in `ls /etc/modules.d/*|grep -e "[[:digit:]]\-"| sort `; do for x in `cat $i`; do modprobe $x;done ; done
[  828.936899] modprobe: failed to find a module named crypto_hash
[  828.961129] modprobe: failed to find a module named crc32c_generic
[  828.984340] modprobe: failed to find a module named aead
[  829.008226] modprobe: failed to find a module named arc4
[  829.074984] modprobe: failed to find a module named cbc
[  829.098514] modprobe: failed to find a module named deflate
[  829.147176] modprobe: failed to find a module named ecb
[  829.170571] modprobe: failed to find a module named hmac
[  829.300308] modprobe: failed to find a module named pcompress
[  829.324192] modprobe: failed to find a module named rng
[  829.371681] modprobe: failed to find a module named crypto_wq
[  829.439042] modprobe: failed to find a module named eseqiv
[  829.458088] modprobe: failed to find a module named chainiv
[  829.531591] modprobe: mii is already loaded
[  829.554310] modprobe: usb-common is already loaded
[  829.573161] modprobe: usbcore is already loaded
[  829.596032] modprobe: failed to find a module named regmap-core
[  829.614892] modprobe: failed to find a module named regmap-i2c
[  829.633930] modprobe: failed to find a module named regmap-spi
[  829.744860] modprobe: failed to find a module named configfs
[  829.772255] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[  829.880255] Initializing XFRM netlink socket
[  829.899973] NET: Registered protocol family 15
[  830.119113] ssdk_switch_device_num_init[1159]:INFO:ess-switch dts node number: 2
[  830.119156] ssdk_dt_get_switch_node[970]:INFO:ess-switch DT exist!
[  830.125571] ssdk_dt_parse_access_mode[856]:INFO:switch_access_mode: local bus
[  830.131601] ssdk_dt_parse_access_mode[869]:INFO:switchreg_base_addr: 0x39c00000
[  830.138780] ssdk_dt_parse_access_mode[870]:INFO:switchreg_size: 0x200000
[  830.145882] ssdk_dt_parse_mac_mode[295]:INFO:mac mode = 0xf
[  830.152838] ssdk_dt_parse_mac_mode[301]:INFO:mac mode1 doesn't exit!
[  830.158139] ssdk_dt_parse_mac_mode[310]:INFO:mac mode2 doesn't exit!
[  830.164733] ssdk_dt_parse_port_bmp[757]:INFO:port_bmp doesn't exist!
[  830.171089] ssdk_dt_parse_uniphy[332]:INFO:ess-uniphy DT exist!
[  830.177407] ssdk_dt_parse_led[943]:INFO:current dts led_source_num is 0
[  830.183053] ssdk_plat_init start
[  832.596130] ssdk_mp_reset_init[739]:INFO:MP reset successfully!
[  832.596189] ssdk_gcc_clock_init[1033]:INFO:SSDK gcc clock init successfully!
[  832.601609] mpge_phy_api_ops_init[1089]:INFO:qca probe mpge phy driver succeeded!
[  832.608559] regi_init[3598]:INFO:Initializing SCOMPHY!
[  833.740134] _adpt_mp_uniphy_clk_output_ctrl_set[236]:INFO:uniphy will output clock as 25000000Hz
[  833.740242] ssdk_switch_register[1710]:INFO:Chip version 0xee
[  833.748020] qca_link_polling_select[1315]:INFO:link-polling-required node does not exist
[  833.753617] ssdk_switch_register[1744]:INFO:polling is selected
[  833.761795] regi_init[3608]:INFO:Initializing SCOMPHY Done!!
[  833.767459] ssdk_dt_get_switch_node[970]:INFO:ess-switch DT exist!
[  833.773324] ssdk_dt_parse_access_mode[856]:INFO:switch_access_mode: mdio
[  833.779328] ssdk_dt_parse_mac_mode[292]:INFO:mac mode doesn't exit!
[  833.786181] ssdk_dt_parse_mac_mode[301]:INFO:mac mode1 doesn't exit!
[  833.792158] ssdk_dt_parse_mac_mode[310]:INFO:mac mode2 doesn't exit!
[  833.798795] ssdk_dt_parse[1061]:INFO:switch node is qca83xx!
[  833.805089] ssdk_plat_init start
[  833.875033] f1_phy_api_ops_init[1517]:INFO:qca probe f1 phy driver succeeded!
[  833.875055] regi_init[3556]:INFO:Initializing ISISC!!
[  833.881218] /soc/ess-instance/ess-switch1@1: could not get #gpio-cells for /soc/cti@6010000
[  834.096113] qca_ar8327_gpio_reset[3489]:INFO:GPIO39 reset switch done
[  834.096295] ssdk_switch_register[1718]:INFO:Chip version 0x1302
[  834.101540] qca_link_polling_select[1315]:INFO:link-polling-required node does not exist
[  834.107274] ssdk_switch_register[1744]:INFO:polling is selected
[  835.756106] regi_init[3561]:INFO:Initializing ISISC Done!!
[  835.756220] regi_init[3631]:INFO:qca-ssdk module init succeeded!
[  835.784689] modprobe: failed to find a module named soundcore
[  835.803352] modprobe: failed to find a module named snd
[  835.880065] modprobe: failed to find a module named snd-timer
[  835.898858] modprobe: failed to find a module named snd-pcm
[  836.050837] GMAC1(9d771500) Invalid MAC@ - using 5e:e0:53:b4:b9:82
[  836.052435] GMAC2(9d774500) Invalid MAC@ - using 4a:75:13:0c:da:fc
[  836.057213] **********************************************************
[  836.062080] * NSS Data Plane driver
[  836.068745] **********************************************************
[  836.387813] l2tp_core: L2TP core driver, V2.0
[  836.405684] l2tp_netlink: L2TP netlink interface
[  836.597730] qca-nss 7a00000.nss: Direct firmware load for qca-nss0.bin failed with error -2
[  836.597760] qca-nss 7a00000.nss: Falling back to user helper
[  836.814534] procd: Could not find firmware /lib/firmware/qca-nss0.bin
[  836.814858] firmware qca-nss0.bin: firmware_loading_store: map pages failed
[  836.820196] 7f5704c0: request_firmware failed with err code: -11[  836.826474] procd: failed to write to /sys//devices/platform/soc/7a00000.nss/firmware/qca-nss0.bin/loading

[  836.832655] 7f5704c0: firmware load from driver failed
[  836.842588] qca-nss: probe of 7a00000.nss failed with error -11
[  836.880206] sit: IPv6 over IPv4 tunneling driver
[  836.902832] modprobe: udp_tunnel is already loaded
[  836.923822] modprobe: ip6_udp_tunnel is already loaded
[  836.948454] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded.
[  836.995123] gre: GRE over IPv4 demultiplexor driver
[  837.013463] ip_gre: GRE over IPv4 tunneling driver
[  837.038376] ip6_gre: GRE over IPv6 tunneling driver
[  837.060371] modprobe: libahci_platform is already loaded
[  837.077346] modprobe: ahci_platform is already loaded
[  837.108402] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[  837.156418] modprobe: scsi_mod is already loaded
[  837.172894] modprobe: sd_mod is already loaded
[  837.194155] modprobe: ehci-hcd is already loaded
[  837.210874] modprobe: ehci-platform is already loaded
[  837.227488] modprobe: failed to find a module named ehci-orion
[  837.244403] modprobe: failed to find a module named ehci-atmel
[  837.265281] modprobe: libahci is already loaded
[  837.281868] modprobe: ahci is already loaded
[  837.306918] ip6_tables: (C) 2000-2006 Netfilter Core Team
[  837.395983] modprobe: nf_reject_ipv6 is already loaded
[  837.417569] rmnet_nss_init(): initializing rmnet_nss
[  837.439654] ZTE Generic Netlink Module Inserted without Lock
[  837.460585] modprobe: udc-core is already loaded
[  837.481544] modprobe: phy-qca-m31 is already loaded
[  837.498007] modprobe: phy-qca-uniphy is already loaded
[  837.519801] Netfilter messages via NETLINK v0.30.
[  837.523011] ip_set: protocol 6
[  837.854073] nf_conntrack version 0.5.0 (5936 buckets, 23744 max)
[  837.882076] openvswitch: Open vSwitch switching datapath
[  837.929866] modprobe: failed to find a module named i2c-core
[  837.945476] modprobe: failed to find a module named i2c-dev
[  837.993860] QCA Hy-Fi multicast installation successfully
[  838.042255] PPP generic driver version 2.4.2
[  838.096715] nss_lag_init[352]:LAG Manager Installed
[  838.138473] NET: Registered protocol family 24
[  838.162474] PPTP driver version 0.8.5
[  838.218274] diag: IPC Logging disabled
[  838.256449] TRACK: P[0]      PMask[4]
[  838.256471] TRACK: P[1]      PMask[4]
[  838.258731] TRACK: P[2]      PMask[4]
[  838.262410] TRACK: P[3]      PMask[4]
[  838.265231] nik 4097 info->svc_id
[  838.292280] QCA multicast snooping installed successfully
[  838.314477] <NSS-CRYPTO>:module loaded Build_ID - 11/24/22, 13:07:38 SoC=ipq50xx
[  838.347355] cannot find nss-macsec0 node
[  838.347434] nss-macsec1 DT exist!
[  838.350422] cannot find nss-macsec2 node
[  838.353546] nss_macsec init success
[  838.376459] modprobe: usb_f_diag is already loaded
[  838.417511] modprobe: bt_rproc is already loaded
[  838.436493] modprobe: dwc3-qcom is already loaded
[  838.451157] modprobe: dbm is already loaded
[  838.470115] modprobe: dwc3 is already loaded
[  838.488984] modprobe: xhci-hcd is already loaded
[  838.503512] modprobe: xhci-pci is already loaded
[  838.518693] modprobe: xhci-plat-hcd is already loaded
[  838.538846] modprobe: failed to find a module named snd-soc-core
[  838.557631] modprobe: bootconfig is already loaded
[  838.622751] modprobe: leds-gpio is already loaded
[  838.729829] modprobe: failed to find a module named configs
[  838.764917] modprobe: failed to find a module named sch_fq_codel
[  838.857712] u32 classifier
[  838.857735]     input device check on
[  838.859305]     Actions configured
[  838.892665] Mirror/redirect action on
[  839.221550] fuse init (API version 7.23)
root@(none):/#

70 Odpowiedź przez MiG25

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE T3000

Po takim czymś jest m.n eth0 i eth1:

root@(none):/# ifconfig -a
bond0     Link encap:Ethernet  HWaddr D6:1E:C4:78:28:B1
          BROADCAST MASTER MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

eth0      Link encap:Ethernet  HWaddr 5E:E0:53:B4:B9:82
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

eth1      Link encap:Ethernet  HWaddr 4A:75:13:0C:DA:FC
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

gre0      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          NOARP  MTU:1476  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

gretap0   Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1462  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

ifb0      Link encap:Ethernet  HWaddr EE:53:9C:34:A9:EE
          BROADCAST NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:32
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

ifb1      Link encap:Ethernet  HWaddr 9A:BE:F2:82:90:77
          BROADCAST NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:32
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

ip6gre0   Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          NOARP  MTU:1448  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

ip6tnl0   Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          NOARP  MTU:1452  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

ipsecdummy Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          [NO FLAGS]  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback
          LOOPBACK  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

sit0      Link encap:IPv6-in-IPv4
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

teql0     Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

root@(none):/#

71 Odpowiedź przez GChmurka

  • Zarejestrowany: 2023-03-12
  • Posty: 20

Odp: ZTE T3000

Uzupełniłem post wyżej. Pokaz init.d.....

Kurcze fajnie by było jakbym mógł sam pomajstrować na tym router ku zdalnie. Nie dało by się postawić jakiegoś ssh abym mógł popróbować się bawić na tym sprzęcie. Myślę że udało by mi się doprowadzić do odpalenia sieciowek. Tak pisać jest ciężko.

72 Odpowiedź przez MiG25

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE T3000

root@(none):/# cat /etc/init.d/qca-nss-drv
#!/bin/sh /etc/rc.common
#
# Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
#
# Permission to use, copy, modify, and/or distribute this software for any
# purpose with or without fee is hereby granted, provided that the above
# copyright notice and this permission notice appear in all copies.
#
# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
#

START=70

enable_rps() {
        irq_nss_rps=`grep nss_queue1 /proc/interrupts | cut -d ':' -f 1 | tr -d ' '`
        for entry in $irq_nss_rps
        do
                echo 2 > /proc/irq/$entry/smp_affinity
        done

        irq_nss_rps=`grep nss_queue2 /proc/interrupts | cut -d ':' -f 1 | tr -d ' '`
        for entry in $irq_nss_rps
        do
                echo 4 > /proc/irq/$entry/smp_affinity
        done

        irq_nss_rps=`grep nss_queue3 /proc/interrupts | cut -d ':' -f 1 | tr -d ' '`
        for entry in $irq_nss_rps
        do
                echo 8 > /proc/irq/$entry/smp_affinity
        done

        # Enable NSS RPS
        sysctl -w dev.nss.rps.enable=1 >/dev/null 2>/dev/null

}


start() {
        local rps_enabled="$(uci_get nss @general[0] enable_rps)"
        if [ "$rps_enabled" -eq 1 ]; then
                enable_rps
        fi
}
root@(none):/#

Nie wiem o co chodzi z tym kanał 3 

root@(none):/# ls /etc/rc.d
K104ipqcm              S13openssl             S72shortcut-fe
K10ddns                S15qca-acfg            S75mcsd
K10sysstat             S15qca-hostapd         S90lldpd
K89log                 S15qca-wpa-supplicant  S90sysstat
K90network             S16qca-ssdk            S95ddns
K91cnss_diag           S19cnss_diag           S95done
K95netmgrd             S19firewall            S96led
K95qnicornd            S19qca-nss-ecm         S96wifi_fw_done
K95wifi_fw_mount       S20network             S97ftm
K98boot                S40skb_recycler        S97netmgrd
K98boot-ftm            S50cron                S97qnicornd
K99umount              S50pppoe-server        S97repacd
S00sysfixtime          S50radvd               S98autorole
S00wifi_fw_mount       S50telnet              S98diag_socket_app
S08boot-ftm            S50uhttpd              S98ipqcm
S08qrtr                S52wsplcd              S98mcproxy
S09modem-monitor       S54hyfi-bridging       S98multiwan
S10boot                S55ezmesh              S98powerctl
S10system              S55hyd                 S98rngd
S11sysctl              S55lbd                 S98thermal
S12breakpad            S55rstp                S99igmpproxy
S12log                 S65alsa
S12rpcd                S70qca-nss-drv
root@(none):/#

73 Odpowiedź przez MiG25

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE T3000

Po komendzie "ifconfig eth1 192.168.1.1 up" ping z kompa zaczyna iść z komputera , natomiast ping z routera się wiesza... zobaczymy czy coś po tftp się uda ściągnąć (plan jest taki ,żeby ściągnąć całego busyboxa przez tftp , wtedy nim będę mógł wysłać backupy partycji).

74 Odpowiedź przez MiG25

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE T3000

Ok , zadziałało ściągnięcie busyboxa , no i wychodzi na to ,że on też działa

cd /tmp
tftp -g -r busybox-armv7l 192.168.1.10
chmod 755 busybox-armv7l

75 Odpowiedź przez MiG25 (edytowany przez MiG25 2023-07-22 21:37:37)

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE T3000

Ok ,wszystkie 30 partcji ( od mtd0 do mtd29) mam skopiowane...
Do tego :
ftd komendą:

cat /sys/firmware/fdt > /tmp/ftd.bin

device-tree komendą:

tar czvf /tmp/devicetree.tar.gz /proc/device-tree

Zamieszczę linka do tego w pierwszym poście.
Coś jeszcze się przyda ?

@GChmurka , niestety nie mam ip zewnętrznego ,ale jak masz pomysł jak Ci to udostępnić to daj znać...

EDIT:
Jeszcze 

 tar czvf /tmp/devicetreesys.tar.gz /sys/firmware/