• Zarejestrowany: 2017-05-09
  • Posty: 688

Temat: Zyxel NBG7815 (Armor G5)

Witam,
zakupiłem router jak w opisie. Udało się bez problemu odblokować dostęp ssh oraz zainstalować OpenWrt.

Natomiast mam problem przy kroku:
2. If you already have OpenWrt use sysupgrade or LuCi “Flash new firware image” option, after this operation use script from https://github.com/itorK/nbg7815_tools/ … rtition.sh to change boot partition

Podczas próby wykonania polecenia mam info:
root@OpenWrt:~# sh /tmp/change_boot_partition.sh
OpenWrt release
1+0 records in
1+0 records out
1+0 records in
1+0 records out
Could not open mtd device: /dev/mtd2
Can't open device for writing!
Could not open mtd device: /dev/mtd3
Can't open device for writing!

Jak rozwiązać problem?

PS. Czy ktoś wie jak wygląda temat sterowania wentylatorem i diodą LED?

GL.iNet GL-MT6000 + 2x AP_Xiaomi AX3000T

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Zyxel NBG7815 (Armor G5)

Może gość założył że masz soft w którym jest odblokowana partycja mtd2 i mtd3? W openwrt to nie ma miejsca.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez artur_n

  • Zarejestrowany: 2017-05-09
  • Posty: 688

Odp: Zyxel NBG7815 (Armor G5)

Sprzęt ma podobno 4GB i tak mało było by do wykorzystania?

PS. Czy ktoś wie jak wygląda temat sterowania wentylatorem i diodą LED?

GL.iNet GL-MT6000 + 2x AP_Xiaomi AX3000T

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Zyxel NBG7815 (Armor G5)

"nie ma miejsca" w sensie nie że miejsce się kończyło tylko że partycje mtd2 i mtd3 wg dtsu są tylko-do-odczytu a nie do zapisu. Więc ich nie zapiszesz bez odblokowania.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez artur_n

  • Zarejestrowany: 2017-05-09
  • Posty: 688

Odp: Zyxel NBG7815 (Armor G5)

Czyli co z tym fantem?
Zostawić nie ruszać?

GL.iNet GL-MT6000 + 2x AP_Xiaomi AX3000T

6 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Zyxel NBG7815 (Armor G5)

Jak ci sie uruchomi z openwrt to wszystko, zainstalowałeś.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

7 Odpowiedź przez artur_n

  • Zarejestrowany: 2017-05-09
  • Posty: 688

Odp: Zyxel NBG7815 (Armor G5)

Ok. Olewam.

A sterowanie wentylatorem?

GL.iNet GL-MT6000 + 2x AP_Xiaomi AX3000T

8 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Zyxel NBG7815 (Armor G5)

Trzeci raz zadałeś pytanie - ja nie wiem więc nie odpowiedziałem, poczekaj aż ktoś ktoś ma ten model się wypowie.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

9 Odpowiedź przez artur_n

  • Zarejestrowany: 2017-05-09
  • Posty: 688

Odp: Zyxel NBG7815 (Armor G5)

Tak, wiem. Przepraszam.

Chciałem nim zastąpić RT3200 ale wygląda, że soft jest mocno nie dopracowany.

GL.iNet GL-MT6000 + 2x AP_Xiaomi AX3000T

10 Odpowiedź przez Cezary (edytowany przez Cezary 2023-06-21 19:57:55)

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Zyxel NBG7815 (Armor G5)

Pierwsze w googlach: https://patchwork.ozlabs.org/project/op … gmail.com/

https://github.com/openwrt/openwrt/pull/11835 ale gość sam zamknął wątek.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

11 Odpowiedź przez artur_n

  • Zarejestrowany: 2017-05-09
  • Posty: 688

Odp: Zyxel NBG7815 (Armor G5)

Za tępy jestem i tak nic z tego nie wiem ;-)

GL.iNet GL-MT6000 + 2x AP_Xiaomi AX3000T

12 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Zyxel NBG7815 (Armor G5)

Krótko - jeszcze nie ma. Może będzie jak gość zrobi to "poprawnie".

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

13 Odpowiedź przez artur_n

  • Zarejestrowany: 2017-05-09
  • Posty: 688

Odp: Zyxel NBG7815 (Armor G5)

Dziękuje Cezary. Kwestia zaczekania aż soft będzie stabilny na główny router.

GL.iNet GL-MT6000 + 2x AP_Xiaomi AX3000T

14 Odpowiedź przez artur_n

  • Zarejestrowany: 2017-05-09
  • Posty: 688

Odp: Zyxel NBG7815 (Armor G5)

Jeszcze jedno pytanie. Dlaczego w OpenWRT są widoczne 3 radia?

GL.iNet GL-MT6000 + 2x AP_Xiaomi AX3000T

15 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Zyxel NBG7815 (Armor G5)

Ponieważ to urządzenie ma fizycznie trzy radia? Jedno dla 2.4GHz i dwa dla 5GHz. I jeszcze bluetooth ma.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

16 Odpowiedź przez artur_n

  • Zarejestrowany: 2017-05-09
  • Posty: 688

Odp: Zyxel NBG7815 (Armor G5)

Lypa. Router przy 160MHz na 5GHz nie wystawia WiFi!

GL.iNet GL-MT6000 + 2x AP_Xiaomi AX3000T

17 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Zyxel NBG7815 (Armor G5)

Jak zwykle - bo robisz to na kanałach z DFS na których nie może zrobić 160MHz, prawda? Albo rezygnujesz ze 160MHz albo ustawiasz kraj bez DFS. Przeszukaj to forum...

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

18 Odpowiedź przez artur_n

  • Zarejestrowany: 2017-05-09
  • Posty: 688

Odp: Zyxel NBG7815 (Armor G5)

Mam ustawione Indie i nie idzie.

GL.iNet GL-MT6000 + 2x AP_Xiaomi AX3000T

19 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Zyxel NBG7815 (Armor G5)

Musisz mieć to ustawione na obu radiach, takie samo. I co masz w logach po uruchomieniu (zakładam że tamto radio w ogóle pozwala na 160MHz kanał). Pozwala?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

20 Odpowiedź przez artur_n

  • Zarejestrowany: 2017-05-09
  • Posty: 688

Odp: Zyxel NBG7815 (Armor G5)

Log:

Wed Jun 21 22:05:41 2023 daemon.notice hostapd: Remove interface 'phy1-ap0'
Wed Jun 21 22:05:41 2023 daemon.notice hostapd: phy1-ap0: interface state ENABLED->DISABLED
Wed Jun 21 22:05:41 2023 daemon.notice hostapd: phy1-ap0: AP-DISABLED
Wed Jun 21 22:05:41 2023 daemon.notice hostapd: phy1-ap0: CTRL-EVENT-TERMINATING
Wed Jun 21 22:05:41 2023 daemon.err hostapd: rmdir[ctrl_interface=/var/run/hostapd]: Permission denied
Wed Jun 21 22:05:41 2023 daemon.notice hostapd: nl80211: deinit ifname=phy1-ap0 disabled_11b_rates=0
Wed Jun 21 22:05:41 2023 kern.info kernel: [  869.540909] device phy1-ap0 left promiscuous mode
Wed Jun 21 22:05:41 2023 kern.info kernel: [  869.541021] br-lan: port 8(phy1-ap0) entered disabled state
Wed Jun 21 22:05:41 2023 daemon.notice netifd: Network device 'phy1-ap0' link is down
Wed Jun 21 22:05:41 2023 daemon.notice netifd: Wireless device 'radio1' is now down
Wed Jun 21 22:05:42 2023 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy1.conf (phy phy1-ap0) --> new PHY
Wed Jun 21 22:05:42 2023 kern.info kernel: [  870.048844] br-lan: port 8(phy1-ap0) entered blocking state
Wed Jun 21 22:05:42 2023 kern.info kernel: [  870.048889] br-lan: port 8(phy1-ap0) entered disabled state
Wed Jun 21 22:05:42 2023 kern.info kernel: [  870.053415] device phy1-ap0 entered promiscuous mode
Wed Jun 21 22:05:42 2023 kern.info kernel: [  870.058929] br-lan: port 8(phy1-ap0) entered blocking state
Wed Jun 21 22:05:42 2023 kern.info kernel: [  870.063996] br-lan: port 8(phy1-ap0) entered forwarding state
Wed Jun 21 22:05:42 2023 daemon.notice hostapd: phy1-ap0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Jun 21 22:05:42 2023 daemon.notice hostapd: phy1-ap0: interface state COUNTRY_UPDATE->HT_SCAN
Wed Jun 21 22:05:42 2023 daemon.warn odhcpd[1985]: No default route present, overriding ra_lifetime!
Wed Jun 21 22:05:42 2023 kern.info kernel: [  870.586248] br-lan: port 8(phy1-ap0) entered disabled state
Wed Jun 21 22:05:43 2023 daemon.notice netifd: Wireless device 'radio1' is now up
Wed Jun 21 22:05:43 2023 daemon.warn odhcpd[1985]: No default route present, overriding ra_lifetime!
Wed Jun 21 22:05:44 2023 daemon.notice hostapd: 20/40 MHz operation not permitted on channel pri=6 sec=10 based on overlapping BSSes
Wed Jun 21 22:05:44 2023 daemon.notice hostapd: Fallback to 20 MHz
Wed Jun 21 22:05:44 2023 kern.info kernel: [  872.284874] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap0: link becomes ready
Wed Jun 21 22:05:44 2023 kern.info kernel: [  872.285070] br-lan: port 8(phy1-ap0) entered blocking state
Wed Jun 21 22:05:44 2023 kern.info kernel: [  872.290336] br-lan: port 8(phy1-ap0) entered forwarding state
Wed Jun 21 22:05:44 2023 daemon.notice netifd: Network device 'phy1-ap0' link is up
Wed Jun 21 22:05:44 2023 daemon.notice hostapd: phy1-ap0: interface state HT_SCAN->ENABLED
Wed Jun 21 22:05:44 2023 daemon.notice hostapd: phy1-ap0: AP-ENABLED
Wed Jun 21 22:05:45 2023 daemon.warn odhcpd[1985]: No default route present, overriding ra_lifetime!
Wed Jun 21 22:05:48 2023 daemon.warn odhcpd[1985]: No default route present, overriding ra_lifetime!
Wed Jun 21 22:05:49 2023 daemon.warn odhcpd[1985]: No default route present, overriding ra_lifetime!
Wed Jun 21 22:05:51 2023 daemon.warn odhcpd[1985]: No default route present, overriding ra_lifetime!
GL.iNet GL-MT6000 + 2x AP_Xiaomi AX3000T

21 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Zyxel NBG7815 (Armor G5)

Akurat pokazałeś tylko fragment logu. Całość całość...

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

22 Odpowiedź przez artur_n (edytowany przez artur_n 2023-06-21 21:20:10)

  • Zarejestrowany: 2017-05-09
  • Posty: 688

Odp: Zyxel NBG7815 (Armor G5)

Całość od restartu:

Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.000000] Linux version 6.1.33 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r23375-cdfcac6e24) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Wed Jun 14 21:27:29 2023
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] Machine model: Zyxel NBG7815
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] Zone ranges:
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000]   DMA      [mem 0x0000000040000000-0x000000007fffffff]
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000]   DMA32    empty
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000]   Normal   empty
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] Movable zone start for each node
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] Early memory node ranges
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x0000000040ffffff]
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000041000000-0x000000004a3fffff]
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000]   node   0: [mem 0x000000004a400000-0x00000000510fffff]
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000051100000-0x000000007fffffff]
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] psci: probing for conduit method from DT.
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] psci: PSCIv1.0 detected in firmware.
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] psci: Using standard PSCI v0.2 function IDs
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] psci: SMC Calling Convention v1.0
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] psci: OSI mode supported.
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    0.000000] psci: failed to set PC mode: -1
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] percpu: Embedded 17 pages/cpu s31592 r8192 d29848 u69632
Wed Jun 21 22:18:28 2023 kern.debug kernel: [    0.000000] pcpu-alloc: s31592 r8192 d29848 u69632 alloc=17*4096
Wed Jun 21 22:18:28 2023 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] Detected VIPT I-cache on CPU0
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] alternatives: applying boot alternatives
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 258048
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.000000] Kernel command line: console=ttyMSM0,115200n8 root=PARTUUID=a0bb3852-36cc-ac69-a1a2-6bd39ff56f0a rootwait
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] Memory: 887224K/1048576K available (8128K kernel code, 872K rwdata, 2272K rodata, 1344K init, 291K bss, 161352K reserved, 0K cma-reserved)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000]     Tracing variant of Tasks RCU enabled.
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] Root IRQ handler: gic_handle_irq
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479]
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000111] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000125] pid_max: default: 32768 minimum: 301
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000613] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.000627] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.002496] cblist_init_generic: Setting adjustable number of callback queues.
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.002509] cblist_init_generic: Setting shift to 2 and lim to 1.
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.002702] rcu: Hierarchical SRCU implementation.
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.002706] rcu:     Max phase no-delay instances is 1000.
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.003515] smp: Bringing up secondary CPUs ...
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.004155] Detected VIPT I-cache on CPU1
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.004299] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.004966] Detected VIPT I-cache on CPU2
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.005071] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.005694] Detected VIPT I-cache on CPU3
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.005795] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.005864] smp: Brought up 1 node, 4 CPUs
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.005872] SMP: Total of 4 processors activated.
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.005877] CPU features: detected: 32-bit EL0 Support
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.005881] CPU features: detected: CRC32 instructions
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.005944] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.005950] CPU: All CPU(s) started at EL1
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.005953] alternatives: applying system-wide alternatives
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.016632] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.016659] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.016876] pinctrl core: initialized pinctrl subsystem
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.018335] NET: Registered PF_NETLINK/PF_ROUTE protocol family
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.018868] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.018914] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.018963] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.019351] thermal_sys: Registered thermal governor 'step_wise'
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.019540] cpuidle: using governor menu
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.019809] ASID allocator initialised with 65536 entries
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.074863] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.083421] SCSI subsystem initialized
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.083625] usbcore: registered new interface driver usbfs
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.083677] usbcore: registered new interface driver hub
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.083724] usbcore: registered new device driver usb
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    0.083949] psci: failed to set OSI mode: -1
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.084271] qcom_scm: convention: smc arm 64
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.085817] clocksource: Switched to clocksource arch_sys_counter
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.086993] NET: Registered PF_INET protocol family
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.087140] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.088575] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.088599] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.088613] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.088700] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.088978] TCP: Hash tables configured (established 8192 bind 8192)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.089079] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.089117] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.089344] NET: Registered PF_UNIX/PF_LOCAL protocol family
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.089383] PCI: CLS 0 bytes, default 64
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.090691] workingset: timestamp_bits=46 max_order=18 bucket_order=0
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.095782] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.095807] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.096818] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    0.098649] qcom-qmp-usb-phy 58000.phy: supply vdda-phy not found, using dummy regulator
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    0.098811] qcom-qmp-usb-phy 58000.phy: supply vdda-pll not found, using dummy regulator
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    0.100177] qcom-qmp-usb-phy 78000.phy: supply vdda-phy not found, using dummy regulator
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    0.100301] qcom-qmp-usb-phy 78000.phy: supply vdda-pll not found, using dummy regulator
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    0.101981] qcom-qusb2-phy 59000.phy: supply vdd not found, using dummy regulator
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    0.102118] qcom-qusb2-phy 59000.phy: supply vdda-pll not found, using dummy regulator
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    0.102174] qcom-qusb2-phy 59000.phy: supply vdda-phy-dpdm not found, using dummy regulator
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.102338] qcom-qusb2-phy 59000.phy: Registered Qcom-QUSB2 phy
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    0.102528] qcom-qusb2-phy 79000.phy: supply vdd not found, using dummy regulator
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    0.102650] qcom-qusb2-phy 79000.phy: supply vdda-pll not found, using dummy regulator
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    0.102734] qcom-qusb2-phy 79000.phy: supply vdda-phy-dpdm not found, using dummy regulator
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.102883] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy
Wed Jun 21 22:18:28 2023 kern.err kernel: [    0.107767] bam-dma-engine 704000.dma-controller: num-channels unspecified in dt
Wed Jun 21 22:18:28 2023 kern.err kernel: [    0.107782] bam-dma-engine 704000.dma-controller: num-ees unspecified in dt
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.112357] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.114514] msm_serial 78b1000.serial: msm_serial: detected port #1
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.114554] msm_serial 78b1000.serial: uartclk = 19200000
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.114656] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 20, base_baud = 1200000) is a MSM
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.115104] msm_serial 78b3000.serial: msm_serial: detected port #0
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.115133] msm_serial 78b3000.serial: uartclk = 3686400
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.115210] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 21, base_baud = 230400) is a MSM
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.115233] msm_serial: console setup on port #0
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.855675] printk: console [ttyMSM0] enabled
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.860867] msm_serial: driver initialized
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.869788] loop: module loaded
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.869867] Loading iSCSI transport class v2.0-870.
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.873318] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
Wed Jun 21 22:18:28 2023 kern.info kernel: [    0.878192] spi-nor spi0.0: w25q64dw (8192 Kbytes)
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.884208] 22 fixed-partitions partitions found on MTD device spi0.0
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.889274] Creating 22 MTD partitions on "spi0.0":
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.895010] 0x000000000000-0x000000050000 : "0:sbl1"
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.900298] 0x000000050000-0x000000060000 : "0:mibib"
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.905372] 0x000000060000-0x000000080000 : "0:bootconfig"
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.910374] 0x000000080000-0x0000000a0000 : "0:bootconfig1"
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.915768] 0x0000000a0000-0x000000220000 : "0:qsee"
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.921180] 0x000000220000-0x0000003a0000 : "0:qsee_1"
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.926457] 0x0000003a0000-0x0000003b0000 : "0:devcfg"
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.931333] 0x0000003b0000-0x0000003c0000 : "0:devcfg_1"
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.936463] 0x0000003c0000-0x0000003d0000 : "0:apdp"
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.941915] 0x0000003d0000-0x0000003e0000 : "0:apdp_1"
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.946934] 0x0000003e0000-0x000000420000 : "0:rpm"
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.951771] 0x000000420000-0x000000460000 : "0:rpm_1"
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.956604] 0x000000460000-0x000000470000 : "0:cdt"
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.961779] 0x000000470000-0x000000480000 : "0:cdt_1"
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.966511] 0x000000480000-0x000000540000 : "0:appsbl"
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.971727] 0x000000540000-0x000000600000 : "0:appsbl_1"
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.976762] 0x000000600000-0x000000610000 : "0:appsblenv"
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.982175] 0x000000610000-0x000000650000 : "0:art"
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.987553] 0x000000650000-0x0000006d0000 : "0:ethphyfw"
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.992164] 0x0000006d0000-0x0000006e0000 : "0:crt"
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    0.997836] 0x0000006e0000-0x0000006f0000 : "dual_flag"
Wed Jun 21 22:18:28 2023 kern.notice kernel: [    1.002303] 0x0000006f0000-0x000000800000 : "reserved"
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.015645] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.038745] i2c_dev: i2c /dev entries driver
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.046267] sdhci: Secure Digital Host Controller Interface driver
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.046311] sdhci: Copyright(c) Pierre Ossman
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.051346] sdhci-pltfm: SDHCI platform and OF driver helper
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.057693] remoteproc remoteproc0: releasing cd00000.q6v5_wcss
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.079641] NET: Registered PF_INET6 protocol family
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.080704] Segment Routing with IPv6
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.083710] In-situ OAM (IOAM) with IPv6
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.087353] NET: Registered PF_PACKET protocol family
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.088611] mmc0: SDHCI controller on 7824900.mmc [7824900.mmc] using ADMA 64-bit
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.091259] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.103820] 8021q: 802.1Q VLAN Support v1.8
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.139099] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.139441] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.145241] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.151854] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.159514] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.167025] cpr3_mem_acc_init: apc: not using memory accelerator regulator
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.176146] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      SVS: open-loop= 704000 uV
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.183086] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      NOM: open-loop= 816000 uV
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.193080] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused    TURBO: open-loop= 880000 uV
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.202891] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused   STURBO: open-loop= 976000 uV
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.212766] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      SVS: quot[ 7]= 701, quot_offset[ 7]=   0
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.222498] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      NOM: quot[ 7]= 912, quot_offset[ 7]= 210
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.233346] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused    TURBO: quot[ 7]=1021, quot_offset[ 7]= 105
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.244285] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused   STURBO: quot[ 7]=1191, quot_offset[ 7]= 170
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.255429] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.258583] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 19200 KHz, changing to: 1017600 KHz
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.274658] remoteproc remoteproc0: cd00000.q6v5_wcss is available
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.284728] Waiting for root device PARTUUID=a0bb3852-36cc-ac69-a1a2-6bd39ff56f0a...
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.284808] mmc0: new HS200 MMC card at address 0001
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.292318] mmcblk0: mmc0:0001 M62704 3.53 GiB
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.297595]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.301634] mmcblk0boot0: mmc0:0001 M62704 2.00 MiB
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.306906] mmcblk0boot1: mmc0:0001 M62704 2.00 MiB
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.311509] mmcblk0rpmb: mmc0:0001 M62704 512 KiB, chardev (246:0)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.338596] VFS: Mounted root (squashfs filesystem) readonly on device 179:8.
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.339174] Freeing unused kernel memory: 1344K
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.385842] Run /sbin/init as init process
Wed Jun 21 22:18:28 2023 kern.debug kernel: [    1.385866]   with arguments:
Wed Jun 21 22:18:28 2023 kern.debug kernel: [    1.385869]     /sbin/init
Wed Jun 21 22:18:28 2023 kern.debug kernel: [    1.385873]   with environment:
Wed Jun 21 22:18:28 2023 kern.debug kernel: [    1.385875]     HOME=/
Wed Jun 21 22:18:28 2023 kern.debug kernel: [    1.385879]     TERM=linux
Wed Jun 21 22:18:28 2023 user.info kernel: [    1.473419] init: Console is alive
Wed Jun 21 22:18:28 2023 user.info kernel: [    1.473567] init: - watchdog -
Wed Jun 21 22:18:28 2023 user.info kernel: [    1.792477] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Wed Jun 21 22:18:28 2023 kern.info kernel: [    1.803023] hwmon hwmon0: temp1_input not attached to any thermal zone
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    1.870796] ssdk_switch_device_num_init[1335]:INFO:ess-switch dts node number: 1
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    1.870900] ssdk_dt_get_switch_node[1124]:INFO:ess-switch DT exist!
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    1.877291] ssdk_dt_parse_access_mode[999]:INFO:switch_access_mode: local bus
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    1.883257] ssdk_dt_parse_access_mode[1012]:INFO:switchreg_base_addr: 0x3a000000
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    1.890556] ssdk_dt_parse_access_mode[1013]:INFO:switchreg_size: 0x1000000
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    1.898018] ssdk_dt_parse_mac_mode[327]:INFO:mac mode = 0x0
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    1.904693] ssdk_dt_parse_mac_mode[336]:INFO:mac mode1 = 0xf
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    1.910168] ssdk_dt_parse_mac_mode[345]:INFO:mac mode2 = 0xd
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    1.916083] ssdk_dt_parse_phy_info[716]:INFO:[PORT 5] port_mac_sel = QGMAC_PORT
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    1.921742] ssdk_dt_parse_uniphy[364]:INFO:ess-uniphy DT exist!
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    1.928845] ssdk_dt_parse_intf_mac[942]:INFO:dp1 MAC d8:ec:e5:78:4b:18
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    1.934880] ssdk_dt_parse_intf_mac[942]:INFO:dp2 MAC d8:ec:e5:78:4b:18
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    1.941377] ssdk_dt_parse_intf_mac[942]:INFO:dp3 MAC d8:ec:e5:78:4b:18
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    1.947875] ssdk_dt_parse_intf_mac[942]:INFO:dp4 MAC d8:ec:e5:78:4b:18
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    1.954377] ssdk_dt_parse_intf_mac[942]:INFO:dp5 MAC d8:ec:e5:78:4b:19
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    1.960830] ssdk_plat_init[1692]:INFO:ssdk_plat_init start
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    2.086953] ssdk_gcc_clock_init[1275]:INFO:SSDK gcc clock init successfully!
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    2.088065] malibu_phy_api_ops_init[2846]:INFO:qca probe malibu phy driver succeeded!
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    2.096884] aquantia_phy_api_ops_init[2241]:INFO:qca probe aquantia phy driver succeeded!
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    2.101502] qca808x_phy_api_ops_init[2570]:INFO:qca probe qca808x phy driver succeeded!
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    2.110305] regi_init[3953]:INFO:Initializing HPPE!!
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    2.355815] ssdk_ppe_reset_init[1535]:INFO:ppe reset successfully!
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    2.359326] qca_hppe_portctrl_hw_init[126]:INFO:Hawkeye PPE port initializing
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    3.785852] ssdk_switch_register[2017]:INFO:Chip version 0x1500
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    3.785890] qca_link_polling_select[1487]:INFO:link-polling-required node does not exist
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    3.790579] ssdk_switch_register[2043]:INFO:polling is selected
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    3.798927] regi_init[3957]:INFO:Initializing HPPE Done!!
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    3.804676] ssdk_genl_init[211]:INFO:ssdk genl family register success.
Wed Jun 21 22:18:28 2023 kern.warn kernel: [    3.810125] regi_init[4020]:INFO:qca-ssdk module init succeeded!
Wed Jun 21 22:18:28 2023 kern.info kernel: [    3.819025] EDMA ver 1 hw init
Wed Jun 21 22:18:28 2023 kern.info kernel: [    3.822998] EDMA HW Reset completed succesfully
Wed Jun 21 22:18:28 2023 kern.info kernel: [    3.825673] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    3.830090] RxDesc:1 (15-15) RxFill:1 (7-7)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    3.836123] Generic PHY 90000.mdio-1:00: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:00, irq=POLL)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    3.840235] nss-dp 3a001000.dp1 lan1: Registered netdev lan1(qcom-id:1)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    3.849637] Generic PHY 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    3.856289] nss-dp 3a001200.dp2 lan2: Registered netdev lan2(qcom-id:2)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    3.865704] Generic PHY 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    3.872382] nss-dp 3a001400.dp3 lan3: Registered netdev lan3(qcom-id:3)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    3.881827] Generic PHY 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    3.888545] nss-dp 3a001600.dp4 lan4: Registered netdev lan4(qcom-id:4)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.098485] QCA808X ethernet 90000.mdio-1:1c: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:1c, irq=POLL)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.099099] nss-dp 3a001800.dp5 wan: Registered netdev wan(qcom-id:5)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.107964] Aquantia AQR113C 90000.mdio-1:08: FW 5.4, Build 4, Provisioning 1
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.115843] Aquantia AQR113C 90000.mdio-1:08: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:08, irq=POLL)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.121575] nss-dp 3a007000.dp6-syn 10g: Registered netdev 10g(qcom-id:6)
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.131119] **********************************************************
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.137774] * NSS Data Plane driver
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.144179] **********************************************************
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.161773] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.161824] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.166306] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000002010010
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.173745] xhci-hcd xhci-hcd.1.auto: irq 40, io mem 0x08a00000
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.183235] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.188994] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.194545] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.202573] hub 1-0:1.0: USB hub found
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.208751] hub 1-0:1.0: 1 port detected
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.212851] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.216871] hub 2-0:1.0: USB hub found
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.224588] hub 2-0:1.0: 1 port detected
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.228484] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.232220] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.237656] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000002010010
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.245098] xhci-hcd xhci-hcd.2.auto: irq 41, io mem 0x08c00000
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.254555] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.260351] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.265904] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.274074] hub 3-0:1.0: USB hub found
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.280098] hub 3-0:1.0: 1 port detected
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.284168] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.288141] hub 4-0:1.0: USB hub found
Wed Jun 21 22:18:28 2023 kern.info kernel: [    4.295946] hub 4-0:1.0: 1 port detected
Wed Jun 21 22:18:28 2023 user.info kernel: [    4.301493] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Wed Jun 21 22:18:28 2023 user.info kernel: [    4.313370] init: - preinit -
Wed Jun 21 22:18:28 2023 kern.notice kernel: [   11.775804] random: crng init done
Wed Jun 21 22:18:28 2023 kern.info kernel: [   13.908149] loop0: detected capacity change from 0 to 122880
Wed Jun 21 22:18:28 2023 kern.info kernel: [   13.975847] loop0: detected capacity change from 122880 to 108800
Wed Jun 21 22:18:28 2023 kern.info kernel: [   14.008098] EXT4-fs (loop0): recovery complete
Wed Jun 21 22:18:28 2023 kern.info kernel: [   14.008930] EXT4-fs (loop0): mounted filesystem with ordered data mode. Quota mode: disabled.
Wed Jun 21 22:18:28 2023 user.info kernel: [   14.013618] mount_root: switching to ext4 overlay
Wed Jun 21 22:18:28 2023 kern.warn kernel: [   14.021445] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
Wed Jun 21 22:18:28 2023 user.warn kernel: [   14.026659] urandom-seed: Seeding with /etc/urandom.seed
Wed Jun 21 22:18:28 2023 user.info kernel: [   14.066706] procd: - early -
Wed Jun 21 22:18:28 2023 user.info kernel: [   14.066836] procd: - watchdog -
Wed Jun 21 22:18:28 2023 user.info kernel: [   14.602609] procd: - watchdog -
Wed Jun 21 22:18:28 2023 user.info kernel: [   14.603426] procd: - ubus -
Wed Jun 21 22:18:28 2023 user.info kernel: [   14.758020] procd: - init -
Wed Jun 21 22:18:28 2023 user.info kernel: [   14.906663] kmodloader: loading kernel modules from /etc/modules.d/*
Wed Jun 21 22:18:28 2023 user.info kernel: [   14.945772] urngd: v1.0.2 started.
Wed Jun 21 22:18:28 2023 kern.info kernel: [   14.951686] hid: raw HID events driver (C) Jiri Kosina
Wed Jun 21 22:18:28 2023 kern.info kernel: [   14.959695] Bluetooth: Core ver 2.22
Wed Jun 21 22:18:28 2023 kern.info kernel: [   14.959818] NET: Registered PF_BLUETOOTH protocol family
Wed Jun 21 22:18:28 2023 kern.info kernel: [   14.962345] Bluetooth: HCI device and connection manager initialized
Wed Jun 21 22:18:28 2023 kern.info kernel: [   14.967744] Bluetooth: HCI socket layer initialized
Wed Jun 21 22:18:28 2023 kern.info kernel: [   14.973979] Bluetooth: L2CAP socket layer initialized
Wed Jun 21 22:18:28 2023 kern.info kernel: [   14.978599] Bluetooth: SCO socket layer initialized
Wed Jun 21 22:18:28 2023 kern.info kernel: [   14.984670] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Wed Jun 21 22:18:28 2023 kern.info kernel: [   14.988491] Bluetooth: BNEP filters: protocol multicast
Wed Jun 21 22:18:28 2023 kern.info kernel: [   14.994036] Bluetooth: BNEP socket layer initialized
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.001443] usbcore: registered new interface driver btusb
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.004593] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.009515] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.018099] Bluetooth: HCI UART driver ver 2.3
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.023804] Bluetooth: HCI UART protocol H4 registered
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.028337] Bluetooth: HCI UART protocol BCSP registered
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.033439] Bluetooth: HCI UART protocol ATH3K registered
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.039646] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.044215] Bluetooth: HIDP socket layer initialized
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.055679] NET: Registered PF_QIPCRTR protocol family
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.058216] Bluetooth: RFCOMM TTY layer initialized
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.060100] Bluetooth: RFCOMM socket layer initialized
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.064880] Bluetooth: RFCOMM ver 1.11
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.071924] hwmon hwmon1: temp1_input not attached to any thermal zone
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.099720] PPP generic driver version 2.4.2
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.100508] NET: Registered PF_PPPOX protocol family
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.108869] ath11k c000000.wifi: ipq8074 hw2.0
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.108902] ath11k c000000.wifi: FW memory mode: 0
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.112488] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.117513] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.842184] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
Wed Jun 21 22:18:28 2023 user.info kernel: [   15.848402] kmodloader: done loading kernel modules from /etc/modules.d/*
Wed Jun 21 22:18:28 2023 kern.warn kernel: [   15.886153] ath11k c000000.wifi: qmi ignore invalid mem req type 3
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.893653] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
Wed Jun 21 22:18:28 2023 kern.info kernel: [   15.893708] ath11k c000000.wifi: fw_version 0x290c84a5 fw_build_timestamp 2023-03-25 07:34 fw_build_id WLAN.HK.2.9.0.1-01385-QCAHKSWPL_SILICONZ-1
Wed Jun 21 22:18:28 2023 kern.warn kernel: [   16.294200] ath11k c000000.wifi: htt event 48 not handled
Wed Jun 21 22:18:28 2023 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Wed Jun 21 22:18:28 2023 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Wed Jun 21 22:18:28 2023 user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Wed Jun 21 22:18:28 2023 daemon.info dnsmasq[1]: started, version 2.89 cachesize 1000
Wed Jun 21 22:18:28 2023 daemon.info dnsmasq[1]: DNS service limited to local subnets
Wed Jun 21 22:18:28 2023 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-nftset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Wed Jun 21 22:18:28 2023 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Wed Jun 21 22:18:28 2023 daemon.info dnsmasq[1]: using nameserver 192.168.1.1#53
Wed Jun 21 22:18:28 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Wed Jun 21 22:18:28 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Wed Jun 21 22:18:28 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Wed Jun 21 22:18:28 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Wed Jun 21 22:18:28 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Wed Jun 21 22:18:28 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Wed Jun 21 22:18:28 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Wed Jun 21 22:18:28 2023 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Wed Jun 21 22:18:28 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Wed Jun 21 22:18:28 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 0 names
Wed Jun 21 22:18:28 2023 authpriv.info dropbear[1631]: Not backgrounding
Wed Jun 21 22:18:29 2023 user.notice : Added device handler type: bonding
Wed Jun 21 22:18:29 2023 user.notice : Added device handler type: 8021ad
Wed Jun 21 22:18:29 2023 user.notice : Added device handler type: 8021q
Wed Jun 21 22:18:29 2023 user.notice : Added device handler type: macvlan
Wed Jun 21 22:18:29 2023 user.notice : Added device handler type: veth
Wed Jun 21 22:18:29 2023 user.notice : Added device handler type: bridge
Wed Jun 21 22:18:29 2023 user.notice : Added device handler type: Network device
Wed Jun 21 22:18:29 2023 user.notice : Added device handler type: tunnel
Wed Jun 21 22:18:29 2023 daemon.notice procd: /etc/rc.d/S25packet_steering: uci: Entry not found
Wed Jun 21 22:18:29 2023 daemon.notice wpa_supplicant[1820]: Successfully initialized wpa_supplicant
Wed Jun 21 22:18:29 2023 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/network
Wed Jun 21 22:18:29 2023 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/wireless
Wed Jun 21 22:18:29 2023 user.notice ucitrack: Setting up /etc/config/luci-splash reload dependency on /etc/config/firewall
Wed Jun 21 22:18:29 2023 user.notice ucitrack: Setting up /etc/config/qos reload dependency on /etc/config/firewall
Wed Jun 21 22:18:29 2023 user.notice ucitrack: Setting up /etc/config/miniupnpd reload dependency on /etc/config/firewall
Wed Jun 21 22:18:29 2023 user.notice ucitrack: Setting up /etc/config/odhcpd reload dependency on /etc/config/dhcp
Wed Jun 21 22:18:29 2023 kern.info kernel: [   17.573544] br-lan: port 1(lan1) entered blocking state
Wed Jun 21 22:18:29 2023 kern.info kernel: [   17.573590] br-lan: port 1(lan1) entered disabled state
Wed Jun 21 22:18:29 2023 daemon.notice netifd: Interface 'lan' is enabled
Wed Jun 21 22:18:29 2023 daemon.notice netifd: Interface 'lan' is setting up now
Wed Jun 21 22:18:29 2023 kern.info kernel: [   17.577908] device lan1 entered promiscuous mode
Wed Jun 21 22:18:29 2023 daemon.notice netifd: Interface 'lan' is now up
Wed Jun 21 22:18:29 2023 kern.info kernel: [   17.591852] br-lan: port 2(lan2) entered blocking state
Wed Jun 21 22:18:29 2023 kern.info kernel: [   17.591896] br-lan: port 2(lan2) entered disabled state
Wed Jun 21 22:18:29 2023 kern.info kernel: [   17.596183] device lan2 entered promiscuous mode
Wed Jun 21 22:18:29 2023 kern.info kernel: [   17.604322] br-lan: port 3(lan3) entered blocking state
Wed Jun 21 22:18:29 2023 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Wed Jun 21 22:18:29 2023 kern.info kernel: [   17.606012] br-lan: port 3(lan3) entered disabled state
Wed Jun 21 22:18:29 2023 kern.info kernel: [   17.611133] device lan3 entered promiscuous mode
Wed Jun 21 22:18:29 2023 kern.info kernel: [   17.618894] nss-dp 3a001600.dp4 lan4: PHY Link up speed: 1000
Wed Jun 21 22:18:29 2023 kern.info kernel: [   17.621637] br-lan: port 4(lan4) entered blocking state
Wed Jun 21 22:18:29 2023 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Wed Jun 21 22:18:29 2023 kern.info kernel: [   17.626690] br-lan: port 4(lan4) entered disabled state
Wed Jun 21 22:18:29 2023 kern.info kernel: [   17.631886] device lan4 entered promiscuous mode
Wed Jun 21 22:18:29 2023 kern.info kernel: [   17.645676] br-lan: port 5(10g) entered blocking state
Wed Jun 21 22:18:29 2023 kern.info kernel: [   17.645721] br-lan: port 5(10g) entered disabled state
Wed Jun 21 22:18:29 2023 kern.info kernel: [   17.650026] device 10g entered promiscuous mode
Wed Jun 21 22:18:29 2023 daemon.notice netifd: Interface 'loopback' is enabled
Wed Jun 21 22:18:29 2023 daemon.notice netifd: Interface 'loopback' is setting up now
Wed Jun 21 22:18:29 2023 daemon.notice netifd: Interface 'loopback' is now up
Wed Jun 21 22:18:29 2023 user.notice ucitrack: Setting up /etc/config/luci_statistics reload dependency on /etc/config/system
Wed Jun 21 22:18:29 2023 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Wed Jun 21 22:18:29 2023 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/system
Wed Jun 21 22:18:30 2023 daemon.notice netifd: Interface 'wan' is enabled
Wed Jun 21 22:18:30 2023 daemon.notice netifd: Interface 'wan6' is enabled
Wed Jun 21 22:18:30 2023 daemon.notice netifd: Network device 'lan4' link is up
Wed Jun 21 22:18:30 2023 daemon.notice netifd: Network device 'lo' link is up
Wed Jun 21 22:18:30 2023 daemon.notice netifd: Interface 'loopback' has link connectivity
Wed Jun 21 22:18:30 2023 daemon.info procd: - init complete -
Wed Jun 21 22:18:30 2023 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy0.conf (phy phy0-ap0) --> new PHY
Wed Jun 21 22:18:30 2023 kern.info kernel: [   18.402407] br-lan: port 6(phy0-ap0) entered blocking state
Wed Jun 21 22:18:30 2023 kern.info kernel: [   18.402451] br-lan: port 6(phy0-ap0) entered disabled state
Wed Jun 21 22:18:30 2023 kern.info kernel: [   18.407120] device phy0-ap0 entered promiscuous mode
Wed Jun 21 22:18:30 2023 kern.info kernel: [   18.412496] br-lan: port 6(phy0-ap0) entered blocking state
Wed Jun 21 22:18:30 2023 kern.info kernel: [   18.417627] br-lan: port 6(phy0-ap0) entered forwarding state
Wed Jun 21 22:18:30 2023 daemon.notice hostapd: phy0-ap0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Jun 21 22:18:30 2023 kern.info kernel: [   18.423622] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Wed Jun 21 22:18:30 2023 daemon.notice netifd: bridge 'br-lan' link is up
Wed Jun 21 22:18:30 2023 daemon.notice netifd: Interface 'lan' has link connectivity
Wed Jun 21 22:18:30 2023 daemon.notice hostapd: phy0-ap0: interface state COUNTRY_UPDATE->HT_SCAN
Wed Jun 21 22:18:30 2023 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy2.conf (phy phy2-ap0) --> new PHY
Wed Jun 21 22:18:30 2023 kern.info kernel: [   18.450163] br-lan: port 7(phy2-ap0) entered blocking state
Wed Jun 21 22:18:30 2023 kern.info kernel: [   18.450206] br-lan: port 7(phy2-ap0) entered disabled state
Wed Jun 21 22:18:30 2023 kern.info kernel: [   18.454749] device phy2-ap0 entered promiscuous mode
Wed Jun 21 22:18:30 2023 kern.info kernel: [   18.460236] br-lan: port 7(phy2-ap0) entered blocking state
Wed Jun 21 22:18:30 2023 kern.info kernel: [   18.465313] br-lan: port 7(phy2-ap0) entered forwarding state
Wed Jun 21 22:18:30 2023 daemon.notice hostapd: phy2-ap0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Jun 21 22:18:30 2023 daemon.notice hostapd: phy2-ap0: interface state COUNTRY_UPDATE->HT_SCAN
Wed Jun 21 22:18:30 2023 kern.info kernel: [   18.575855] br-lan: port 4(lan4) entered blocking state
Wed Jun 21 22:18:30 2023 kern.info kernel: [   18.575906] br-lan: port 4(lan4) entered forwarding state
Wed Jun 21 22:18:30 2023 kern.info kernel: [   18.580243] br-lan: port 6(phy0-ap0) entered disabled state
Wed Jun 21 22:18:30 2023 kern.info kernel: [   18.585628] br-lan: port 7(phy2-ap0) entered disabled state
Wed Jun 21 22:18:30 2023 daemon.notice hostapd: phy0-ap0: interface state HT_SCAN->DFS
Wed Jun 21 22:18:30 2023 daemon.notice hostapd: phy0-ap0: DFS-CAC-START freq=5180 chan=36 sec_chan=1, width=2, seg0=50, seg1=0, cac_time=60s
Wed Jun 21 22:18:30 2023 daemon.err hostapd: nl80211: kernel reports: (extension) channel is disabled
Wed Jun 21 22:18:30 2023 daemon.err hostapd: DFS start_dfs_cac() failed, -1
Wed Jun 21 22:18:30 2023 daemon.err hostapd: Interface initialization failed
Wed Jun 21 22:18:30 2023 daemon.notice hostapd: phy0-ap0: interface state DFS->DISABLED
Wed Jun 21 22:18:30 2023 daemon.notice hostapd: phy0-ap0: AP-DISABLED
Wed Jun 21 22:18:31 2023 daemon.notice hostapd: phy2-ap0: interface state HT_SCAN->DFS
Wed Jun 21 22:18:31 2023 daemon.notice hostapd: phy2-ap0: DFS-CAC-START freq=5180 chan=36 sec_chan=1, width=2, seg0=50, seg1=0, cac_time=60s
Wed Jun 21 22:18:31 2023 daemon.err hostapd: nl80211: kernel reports: (extension) channel is disabled
Wed Jun 21 22:18:31 2023 daemon.err hostapd: DFS start_dfs_cac() failed, -1
Wed Jun 21 22:18:31 2023 daemon.err hostapd: Interface initialization failed
Wed Jun 21 22:18:31 2023 daemon.notice hostapd: phy2-ap0: interface state DFS->DISABLED
Wed Jun 21 22:18:31 2023 daemon.notice hostapd: phy2-ap0: AP-DISABLED
Wed Jun 21 22:18:31 2023 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy1.conf (phy phy1-ap0) --> new PHY
Wed Jun 21 22:18:31 2023 kern.info kernel: [   19.333536] br-lan: port 8(phy1-ap0) entered blocking state
Wed Jun 21 22:18:31 2023 kern.info kernel: [   19.333578] br-lan: port 8(phy1-ap0) entered disabled state
Wed Jun 21 22:18:31 2023 kern.info kernel: [   19.338225] device phy1-ap0 entered promiscuous mode
Wed Jun 21 22:18:31 2023 kern.info kernel: [   19.343624] br-lan: port 8(phy1-ap0) entered blocking state
Wed Jun 21 22:18:31 2023 kern.info kernel: [   19.348739] br-lan: port 8(phy1-ap0) entered forwarding state
Wed Jun 21 22:18:31 2023 daemon.notice hostapd: phy1-ap0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Jun 21 22:18:31 2023 daemon.notice hostapd: phy1-ap0: interface state COUNTRY_UPDATE->HT_SCAN
Wed Jun 21 22:18:31 2023 daemon.notice netifd: Wireless device 'radio0' is now up
Wed Jun 21 22:18:31 2023 daemon.notice netifd: Wireless device 'radio2' is now up
Wed Jun 21 22:18:31 2023 kern.info kernel: [   19.586227] br-lan: port 8(phy1-ap0) entered disabled state
Wed Jun 21 22:19:23 2023 daemon.notice netifd: Wireless device 'radio1' is now up
Wed Jun 21 22:19:24 2023 daemon.warn odhcpd[1982]: No default route present, overriding ra_lifetime!
Wed Jun 21 22:19:25 2023 daemon.notice hostapd: 20/40 MHz operation not permitted on channel pri=6 sec=10 based on overlapping BSSes
Wed Jun 21 22:19:25 2023 daemon.notice hostapd: Fallback to 20 MHz
Wed Jun 21 22:19:25 2023 kern.info kernel: [   21.822472] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap0: link becomes ready
Wed Jun 21 22:19:25 2023 kern.info kernel: [   21.822669] br-lan: port 8(phy1-ap0) entered blocking state
Wed Jun 21 22:19:25 2023 kern.info kernel: [   21.827930] br-lan: port 8(phy1-ap0) entered forwarding state
Wed Jun 21 22:19:25 2023 daemon.notice netifd: Network device 'phy1-ap0' link is up
Wed Jun 21 22:19:25 2023 daemon.notice hostapd: phy1-ap0: interface state HT_SCAN->ENABLED
Wed Jun 21 22:19:25 2023 daemon.notice hostapd: phy1-ap0: AP-ENABLED
Wed Jun 21 22:19:25 2023 daemon.warn odhcpd[1982]: No default route present, overriding ra_lifetime!
Wed Jun 21 22:19:27 2023 daemon.warn odhcpd[1982]: No default route present, overriding ra_lifetime!
Wed Jun 21 22:19:29 2023 daemon.warn odhcpd[1982]: No default route present, overriding ra_lifetime!
Wed Jun 21 22:19:31 2023 daemon.warn odhcpd[1982]: No default route present, overriding ra_lifetime!
Wed Jun 21 22:19:33 2023 daemon.warn odhcpd[1982]: No default route present, overriding ra_lifetime!
Wed Jun 21 22:19:34 2023 daemon.warn odhcpd[1982]: No default route present, overriding ra_lifetime!
Wed Jun 21 22:19:36 2023 daemon.warn odhcpd[1982]: No default route present, overriding ra_lifetime!
Wed Jun 21 22:19:38 2023 daemon.warn odhcpd[1982]: No default route present, overriding ra_lifetime!
Wed Jun 21 22:19:38 2023 daemon.warn odhcpd[1982]: No default route present, overriding ra_lifetime!
Wed Jun 21 22:19:40 2023 daemon.warn odhcpd[1982]: No default route present, overriding ra_lifetime!
Wed Jun 21 22:19:42 2023 daemon.warn odhcpd[1982]: No default route present, overriding ra_lifetime!
Wed Jun 21 22:19:44 2023 daemon.warn odhcpd[1982]: No default route present, overriding ra_lifetime!
Wed Jun 21 22:19:44 2023 daemon.err uhttpd[2104]: [info] luci: accepted login on / for root from 192.168.1.100
Wed Jun 21 22:19:46 2023 daemon.warn odhcpd[1982]: No default route present, overriding ra_lifetime!
GL.iNet GL-MT6000 + 2x AP_Xiaomi AX3000T

23 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Zyxel NBG7815 (Armor G5)

Oba radia masz ustawione na 36 kanał i nie potrafi uruchomić bo twierdzi że te pozostałe są wyłączone (nl80211: kernel reports: (extension) channel is disabled). Uzyj innego zakresu kanałów.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

24 Odpowiedź przez artur_n

  • Zarejestrowany: 2017-05-09
  • Posty: 688

Odp: Zyxel NBG7815 (Armor G5)

Radio 0 jest na 100 kanale a radio 2 na 36:

Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.000000] Linux version 6.1.33 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r23375-cdfcac6e24) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Wed Jun 14 21:27:29 2023
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] Machine model: Zyxel NBG7815
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] Zone ranges:
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000]   DMA      [mem 0x0000000040000000-0x000000007fffffff]
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000]   DMA32    empty
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000]   Normal   empty
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] Movable zone start for each node
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] Early memory node ranges
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x0000000040ffffff]
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000041000000-0x000000004a3fffff]
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000]   node   0: [mem 0x000000004a400000-0x00000000510fffff]
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000051100000-0x000000007fffffff]
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] psci: probing for conduit method from DT.
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] psci: PSCIv1.0 detected in firmware.
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] psci: Using standard PSCI v0.2 function IDs
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] psci: SMC Calling Convention v1.0
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] psci: OSI mode supported.
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    0.000000] psci: failed to set PC mode: -1
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] percpu: Embedded 17 pages/cpu s31592 r8192 d29848 u69632
Wed Jun 21 22:29:45 2023 kern.debug kernel: [    0.000000] pcpu-alloc: s31592 r8192 d29848 u69632 alloc=17*4096
Wed Jun 21 22:29:45 2023 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] Detected VIPT I-cache on CPU0
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] alternatives: applying boot alternatives
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 258048
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.000000] Kernel command line: console=ttyMSM0,115200n8 root=PARTUUID=a0bb3852-36cc-ac69-a1a2-6bd39ff56f0a rootwait
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] Memory: 887224K/1048576K available (8128K kernel code, 872K rwdata, 2272K rodata, 1344K init, 291K bss, 161352K reserved, 0K cma-reserved)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000]     Tracing variant of Tasks RCU enabled.
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] Root IRQ handler: gic_handle_irq
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479]
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000111] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000125] pid_max: default: 32768 minimum: 301
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000615] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.000629] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.002500] cblist_init_generic: Setting adjustable number of callback queues.
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.002513] cblist_init_generic: Setting shift to 2 and lim to 1.
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.002707] rcu: Hierarchical SRCU implementation.
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.002711] rcu:     Max phase no-delay instances is 1000.
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.003509] smp: Bringing up secondary CPUs ...
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.004148] Detected VIPT I-cache on CPU1
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.004294] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.004959] Detected VIPT I-cache on CPU2
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.005060] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.005683] Detected VIPT I-cache on CPU3
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.005780] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.005849] smp: Brought up 1 node, 4 CPUs
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.005857] SMP: Total of 4 processors activated.
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.005862] CPU features: detected: 32-bit EL0 Support
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.005866] CPU features: detected: CRC32 instructions
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.005930] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.005937] CPU: All CPU(s) started at EL1
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.005940] alternatives: applying system-wide alternatives
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.016610] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.016637] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.016854] pinctrl core: initialized pinctrl subsystem
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.018308] NET: Registered PF_NETLINK/PF_ROUTE protocol family
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.018838] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.018883] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.018930] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.019321] thermal_sys: Registered thermal governor 'step_wise'
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.019510] cpuidle: using governor menu
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.019776] ASID allocator initialised with 65536 entries
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.074715] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.083290] SCSI subsystem initialized
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.083492] usbcore: registered new interface driver usbfs
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.083544] usbcore: registered new interface driver hub
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.083591] usbcore: registered new device driver usb
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    0.083814] psci: failed to set OSI mode: -1
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.084135] qcom_scm: convention: smc arm 64
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.085682] clocksource: Switched to clocksource arch_sys_counter
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.086855] NET: Registered PF_INET protocol family
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.087001] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.088437] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.088461] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.088475] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.088563] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.088842] TCP: Hash tables configured (established 8192 bind 8192)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.088946] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.088984] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.089209] NET: Registered PF_UNIX/PF_LOCAL protocol family
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.089247] PCI: CLS 0 bytes, default 64
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.090721] workingset: timestamp_bits=46 max_order=18 bucket_order=0
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.095794] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.095807] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.096845] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    0.098786] qcom-qmp-usb-phy 58000.phy: supply vdda-phy not found, using dummy regulator
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    0.098933] qcom-qmp-usb-phy 58000.phy: supply vdda-pll not found, using dummy regulator
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    0.100276] qcom-qmp-usb-phy 78000.phy: supply vdda-phy not found, using dummy regulator
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    0.100435] qcom-qmp-usb-phy 78000.phy: supply vdda-pll not found, using dummy regulator
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    0.102119] qcom-qusb2-phy 59000.phy: supply vdd not found, using dummy regulator
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    0.102242] qcom-qusb2-phy 59000.phy: supply vdda-pll not found, using dummy regulator
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    0.102298] qcom-qusb2-phy 59000.phy: supply vdda-phy-dpdm not found, using dummy regulator
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.102461] qcom-qusb2-phy 59000.phy: Registered Qcom-QUSB2 phy
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    0.102670] qcom-qusb2-phy 79000.phy: supply vdd not found, using dummy regulator
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    0.102775] qcom-qusb2-phy 79000.phy: supply vdda-pll not found, using dummy regulator
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    0.102816] qcom-qusb2-phy 79000.phy: supply vdda-phy-dpdm not found, using dummy regulator
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.103011] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy
Wed Jun 21 22:29:45 2023 kern.err kernel: [    0.107866] bam-dma-engine 704000.dma-controller: num-channels unspecified in dt
Wed Jun 21 22:29:45 2023 kern.err kernel: [    0.107881] bam-dma-engine 704000.dma-controller: num-ees unspecified in dt
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.112539] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.114696] msm_serial 78b1000.serial: msm_serial: detected port #1
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.114750] msm_serial 78b1000.serial: uartclk = 19200000
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.114865] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 20, base_baud = 1200000) is a MSM
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.115307] msm_serial 78b3000.serial: msm_serial: detected port #0
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.115335] msm_serial 78b3000.serial: uartclk = 3686400
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.115413] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 21, base_baud = 230400) is a MSM
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.115436] msm_serial: console setup on port #0
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.855885] printk: console [ttyMSM0] enabled
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.861060] msm_serial: driver initialized
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.869948] loop: module loaded
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.870028] Loading iSCSI transport class v2.0-870.
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.873449] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
Wed Jun 21 22:29:45 2023 kern.info kernel: [    0.878376] spi-nor spi0.0: w25q64dw (8192 Kbytes)
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.884362] 22 fixed-partitions partitions found on MTD device spi0.0
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.889488] Creating 22 MTD partitions on "spi0.0":
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.895170] 0x000000000000-0x000000050000 : "0:sbl1"
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.900485] 0x000000050000-0x000000060000 : "0:mibib"
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.905551] 0x000000060000-0x000000080000 : "0:bootconfig"
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.910545] 0x000000080000-0x0000000a0000 : "0:bootconfig1"
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.915857] 0x0000000a0000-0x000000220000 : "0:qsee"
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.921319] 0x000000220000-0x0000003a0000 : "0:qsee_1"
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.926562] 0x0000003a0000-0x0000003b0000 : "0:devcfg"
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.931477] 0x0000003b0000-0x0000003c0000 : "0:devcfg_1"
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.936653] 0x0000003c0000-0x0000003d0000 : "0:apdp"
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.942070] 0x0000003d0000-0x0000003e0000 : "0:apdp_1"
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.947093] 0x0000003e0000-0x000000420000 : "0:rpm"
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.951953] 0x000000420000-0x000000460000 : "0:rpm_1"
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.956782] 0x000000460000-0x000000470000 : "0:cdt"
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.961924] 0x000000470000-0x000000480000 : "0:cdt_1"
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.966677] 0x000000480000-0x000000540000 : "0:appsbl"
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.971868] 0x000000540000-0x000000600000 : "0:appsbl_1"
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.976958] 0x000000600000-0x000000610000 : "0:appsblenv"
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.982366] 0x000000610000-0x000000650000 : "0:art"
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.987658] 0x000000650000-0x0000006d0000 : "0:ethphyfw"
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.992316] 0x0000006d0000-0x0000006e0000 : "0:crt"
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    0.997944] 0x0000006e0000-0x0000006f0000 : "dual_flag"
Wed Jun 21 22:29:45 2023 kern.notice kernel: [    1.002476] 0x0000006f0000-0x000000800000 : "reserved"
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.015810] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.038878] i2c_dev: i2c /dev entries driver
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.046342] sdhci: Secure Digital Host Controller Interface driver
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.046388] sdhci: Copyright(c) Pierre Ossman
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.051422] sdhci-pltfm: SDHCI platform and OF driver helper
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.057884] remoteproc remoteproc0: releasing cd00000.q6v5_wcss
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.079748] NET: Registered PF_INET6 protocol family
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.080823] Segment Routing with IPv6
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.083819] In-situ OAM (IOAM) with IPv6
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.087423] NET: Registered PF_PACKET protocol family
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.088342] mmc0: SDHCI controller on 7824900.mmc [7824900.mmc] using ADMA 64-bit
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.091367] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.103932] 8021q: 802.1Q VLAN Support v1.8
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.139152] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.139488] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.145280] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.151922] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.159570] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.167068] cpr3_mem_acc_init: apc: not using memory accelerator regulator
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.176198] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      SVS: open-loop= 704000 uV
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.183140] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      NOM: open-loop= 816000 uV
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.193130] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused    TURBO: open-loop= 880000 uV
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.202943] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused   STURBO: open-loop= 976000 uV
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.212790] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      SVS: quot[ 7]= 701, quot_offset[ 7]=   0
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.222550] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      NOM: quot[ 7]= 912, quot_offset[ 7]= 210
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.233399] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused    TURBO: quot[ 7]=1021, quot_offset[ 7]= 105
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.244337] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused   STURBO: quot[ 7]=1191, quot_offset[ 7]= 170
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.255465] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.258574] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 19200 KHz, changing to: 1017600 KHz
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.268758] mmc0: new HS200 MMC card at address 0001
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.274757] remoteproc remoteproc0: cd00000.q6v5_wcss is available
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.284064] mmcblk0: mmc0:0001 M62704 3.53 GiB
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.295740]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.296658] mmcblk0boot0: mmc0:0001 M62704 2.00 MiB
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.300555] mmcblk0boot1: mmc0:0001 M62704 2.00 MiB
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.305283] mmcblk0rpmb: mmc0:0001 M62704 512 KiB, chardev (246:0)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.312102] VFS: Mounted root (squashfs filesystem) readonly on device 179:8.
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.316429] Freeing unused kernel memory: 1344K
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.365728] Run /sbin/init as init process
Wed Jun 21 22:29:45 2023 kern.debug kernel: [    1.365751]   with arguments:
Wed Jun 21 22:29:45 2023 kern.debug kernel: [    1.365754]     /sbin/init
Wed Jun 21 22:29:45 2023 kern.debug kernel: [    1.365758]   with environment:
Wed Jun 21 22:29:45 2023 kern.debug kernel: [    1.365761]     HOME=/
Wed Jun 21 22:29:45 2023 kern.debug kernel: [    1.365764]     TERM=linux
Wed Jun 21 22:29:45 2023 user.info kernel: [    1.510056] init: Console is alive
Wed Jun 21 22:29:45 2023 user.info kernel: [    1.510245] init: - watchdog -
Wed Jun 21 22:29:45 2023 user.info kernel: [    1.832516] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Wed Jun 21 22:29:45 2023 kern.info kernel: [    1.843060] hwmon hwmon0: temp1_input not attached to any thermal zone
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    1.910368] ssdk_switch_device_num_init[1335]:INFO:ess-switch dts node number: 1
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    1.910465] ssdk_dt_get_switch_node[1124]:INFO:ess-switch DT exist!
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    1.916876] ssdk_dt_parse_access_mode[999]:INFO:switch_access_mode: local bus
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    1.922829] ssdk_dt_parse_access_mode[1012]:INFO:switchreg_base_addr: 0x3a000000
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    1.930125] ssdk_dt_parse_access_mode[1013]:INFO:switchreg_size: 0x1000000
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    1.937589] ssdk_dt_parse_mac_mode[327]:INFO:mac mode = 0x0
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    1.944265] ssdk_dt_parse_mac_mode[336]:INFO:mac mode1 = 0xf
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    1.949739] ssdk_dt_parse_mac_mode[345]:INFO:mac mode2 = 0xd
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    1.955649] ssdk_dt_parse_phy_info[716]:INFO:[PORT 5] port_mac_sel = QGMAC_PORT
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    1.961318] ssdk_dt_parse_uniphy[364]:INFO:ess-uniphy DT exist!
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    1.968413] ssdk_dt_parse_intf_mac[942]:INFO:dp1 MAC d8:ec:e5:78:4b:18
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    1.974467] ssdk_dt_parse_intf_mac[942]:INFO:dp2 MAC d8:ec:e5:78:4b:18
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    1.980970] ssdk_dt_parse_intf_mac[942]:INFO:dp3 MAC d8:ec:e5:78:4b:18
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    1.987463] ssdk_dt_parse_intf_mac[942]:INFO:dp4 MAC d8:ec:e5:78:4b:18
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    1.993946] ssdk_dt_parse_intf_mac[942]:INFO:dp5 MAC d8:ec:e5:78:4b:19
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    2.000405] ssdk_plat_init[1692]:INFO:ssdk_plat_init start
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    2.127010] ssdk_gcc_clock_init[1275]:INFO:SSDK gcc clock init successfully!
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    2.128260] malibu_phy_api_ops_init[2846]:INFO:qca probe malibu phy driver succeeded!
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    2.137259] aquantia_phy_api_ops_init[2241]:INFO:qca probe aquantia phy driver succeeded!
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    2.141632] qca808x_phy_api_ops_init[2570]:INFO:qca probe qca808x phy driver succeeded!
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    2.150371] regi_init[3953]:INFO:Initializing HPPE!!
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    2.395682] ssdk_ppe_reset_init[1535]:INFO:ppe reset successfully!
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    2.399200] qca_hppe_portctrl_hw_init[126]:INFO:Hawkeye PPE port initializing
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    3.895728] ssdk_switch_register[2017]:INFO:Chip version 0x1500
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    3.895765] qca_link_polling_select[1487]:INFO:link-polling-required node does not exist
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    3.900454] ssdk_switch_register[2043]:INFO:polling is selected
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    3.908797] regi_init[3957]:INFO:Initializing HPPE Done!!
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    3.914506] ssdk_genl_init[211]:INFO:ssdk genl family register success.
Wed Jun 21 22:29:45 2023 kern.warn kernel: [    3.919992] regi_init[4020]:INFO:qca-ssdk module init succeeded!
Wed Jun 21 22:29:45 2023 kern.info kernel: [    3.928571] EDMA ver 1 hw init
Wed Jun 21 22:29:45 2023 kern.info kernel: [    3.932872] EDMA HW Reset completed succesfully
Wed Jun 21 22:29:45 2023 kern.info kernel: [    3.935548] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    3.939961] RxDesc:1 (15-15) RxFill:1 (7-7)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    3.945915] Generic PHY 90000.mdio-1:00: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:00, irq=POLL)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    3.949983] nss-dp 3a001000.dp1 lan1: Registered netdev lan1(qcom-id:1)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    3.959459] Generic PHY 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    3.966153] nss-dp 3a001200.dp2 lan2: Registered netdev lan2(qcom-id:2)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    3.975547] Generic PHY 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    3.982217] nss-dp 3a001400.dp3 lan3: Registered netdev lan3(qcom-id:3)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    3.991739] Generic PHY 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    3.998339] nss-dp 3a001600.dp4 lan4: Registered netdev lan4(qcom-id:4)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.208297] QCA808X ethernet 90000.mdio-1:1c: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:1c, irq=POLL)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.208904] nss-dp 3a001800.dp5 wan: Registered netdev wan(qcom-id:5)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.217780] Aquantia AQR113C 90000.mdio-1:08: FW 5.4, Build 4, Provisioning 1
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.225712] Aquantia AQR113C 90000.mdio-1:08: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:08, irq=POLL)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.231399] nss-dp 3a007000.dp6-syn 10g: Registered netdev 10g(qcom-id:6)
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.240901] **********************************************************
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.247585] * NSS Data Plane driver
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.253989] **********************************************************
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.271835] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.271882] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.276382] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000002010010
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.283807] xhci-hcd xhci-hcd.1.auto: irq 40, io mem 0x08a00000
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.293271] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.299054] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.304607] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.312831] hub 1-0:1.0: USB hub found
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.318830] hub 1-0:1.0: 1 port detected
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.322884] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.327002] hub 2-0:1.0: USB hub found
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.334651] hub 2-0:1.0: 1 port detected
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.338569] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.342282] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.347741] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000002010010
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.355161] xhci-hcd xhci-hcd.2.auto: irq 41, io mem 0x08c00000
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.364624] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.370408] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.375965] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.383854] hub 3-0:1.0: USB hub found
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.390132] hub 3-0:1.0: 1 port detected
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.394422] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.398401] hub 4-0:1.0: USB hub found
Wed Jun 21 22:29:45 2023 kern.info kernel: [    4.406068] hub 4-0:1.0: 1 port detected
Wed Jun 21 22:29:45 2023 user.info kernel: [    4.410969] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Wed Jun 21 22:29:45 2023 user.info kernel: [    4.422835] init: - preinit -
Wed Jun 21 22:29:45 2023 kern.notice kernel: [   14.185670] random: crng init done
Wed Jun 21 22:29:45 2023 kern.info kernel: [   16.309132] loop0: detected capacity change from 0 to 122880
Wed Jun 21 22:29:45 2023 kern.info kernel: [   16.365698] loop0: detected capacity change from 122880 to 108800
Wed Jun 21 22:29:45 2023 kern.info kernel: [   16.396942] EXT4-fs (loop0): recovery complete
Wed Jun 21 22:29:45 2023 kern.info kernel: [   16.397655] EXT4-fs (loop0): mounted filesystem with ordered data mode. Quota mode: disabled.
Wed Jun 21 22:29:45 2023 user.info kernel: [   16.402404] mount_root: switching to ext4 overlay
Wed Jun 21 22:29:45 2023 kern.warn kernel: [   16.410382] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
Wed Jun 21 22:29:45 2023 user.warn kernel: [   16.415501] urandom-seed: Seeding with /etc/urandom.seed
Wed Jun 21 22:29:45 2023 user.info kernel: [   16.457307] procd: - early -
Wed Jun 21 22:29:45 2023 user.info kernel: [   16.457432] procd: - watchdog -
Wed Jun 21 22:29:45 2023 user.info kernel: [   16.996052] procd: - watchdog -
Wed Jun 21 22:29:45 2023 user.info kernel: [   16.996826] procd: - ubus -
Wed Jun 21 22:29:45 2023 user.info kernel: [   17.151577] procd: - init -
Wed Jun 21 22:29:45 2023 user.info kernel: [   17.299113] kmodloader: loading kernel modules from /etc/modules.d/*
Wed Jun 21 22:29:45 2023 user.info kernel: [   17.332928] urngd: v1.0.2 started.
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.348146] hid: raw HID events driver (C) Jiri Kosina
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.356429] Bluetooth: Core ver 2.22
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.356543] NET: Registered PF_BLUETOOTH protocol family
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.359078] Bluetooth: HCI device and connection manager initialized
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.364385] Bluetooth: HCI socket layer initialized
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.370723] Bluetooth: L2CAP socket layer initialized
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.375323] Bluetooth: SCO socket layer initialized
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.381531] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.385207] Bluetooth: BNEP filters: protocol multicast
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.390784] Bluetooth: BNEP socket layer initialized
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.398334] usbcore: registered new interface driver btusb
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.401329] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.406233] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.414748] Bluetooth: HCI UART driver ver 2.3
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.420560] Bluetooth: HCI UART protocol H4 registered
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.425050] Bluetooth: HCI UART protocol BCSP registered
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.430185] Bluetooth: HCI UART protocol ATH3K registered
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.436469] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.440948] Bluetooth: HIDP socket layer initialized
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.452537] NET: Registered PF_QIPCRTR protocol family
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.454863] Bluetooth: RFCOMM TTY layer initialized
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.456850] Bluetooth: RFCOMM socket layer initialized
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.461611] Bluetooth: RFCOMM ver 1.11
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.468417] hwmon hwmon1: temp1_input not attached to any thermal zone
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.496480] PPP generic driver version 2.4.2
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.497312] NET: Registered PF_PPPOX protocol family
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.505597] ath11k c000000.wifi: ipq8074 hw2.0
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.505631] ath11k c000000.wifi: FW memory mode: 0
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.509267] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
Wed Jun 21 22:29:45 2023 kern.info kernel: [   17.514084] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
Wed Jun 21 22:29:45 2023 kern.info kernel: [   18.238575] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
Wed Jun 21 22:29:45 2023 user.info kernel: [   18.243047] kmodloader: done loading kernel modules from /etc/modules.d/*
Wed Jun 21 22:29:45 2023 kern.warn kernel: [   18.283638] ath11k c000000.wifi: qmi ignore invalid mem req type 3
Wed Jun 21 22:29:45 2023 kern.info kernel: [   18.290146] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
Wed Jun 21 22:29:45 2023 kern.info kernel: [   18.290194] ath11k c000000.wifi: fw_version 0x290c84a5 fw_build_timestamp 2023-03-25 07:34 fw_build_id WLAN.HK.2.9.0.1-01385-QCAHKSWPL_SILICONZ-1
Wed Jun 21 22:29:45 2023 kern.warn kernel: [   18.691431] ath11k c000000.wifi: htt event 48 not handled
Wed Jun 21 22:29:45 2023 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Wed Jun 21 22:29:45 2023 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Wed Jun 21 22:29:45 2023 user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Wed Jun 21 22:29:45 2023 daemon.info dnsmasq[1]: started, version 2.89 cachesize 1000
Wed Jun 21 22:29:45 2023 daemon.info dnsmasq[1]: DNS service limited to local subnets
Wed Jun 21 22:29:45 2023 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-nftset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Wed Jun 21 22:29:45 2023 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Wed Jun 21 22:29:45 2023 daemon.info dnsmasq[1]: using nameserver 192.168.1.1#53
Wed Jun 21 22:29:45 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Wed Jun 21 22:29:45 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Wed Jun 21 22:29:45 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Wed Jun 21 22:29:45 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Wed Jun 21 22:29:45 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Wed Jun 21 22:29:45 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Wed Jun 21 22:29:45 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Wed Jun 21 22:29:45 2023 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Wed Jun 21 22:29:45 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Wed Jun 21 22:29:45 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 0 names
Wed Jun 21 22:29:45 2023 authpriv.info dropbear[1630]: Not backgrounding
Wed Jun 21 22:29:46 2023 daemon.notice wpa_supplicant[1813]: Successfully initialized wpa_supplicant
Wed Jun 21 22:29:46 2023 daemon.notice procd: /etc/rc.d/S25packet_steering: uci: Entry not found
Wed Jun 21 22:29:46 2023 user.notice : Added device handler type: bonding
Wed Jun 21 22:29:46 2023 user.notice : Added device handler type: 8021ad
Wed Jun 21 22:29:46 2023 user.notice : Added device handler type: 8021q
Wed Jun 21 22:29:46 2023 user.notice : Added device handler type: macvlan
Wed Jun 21 22:29:46 2023 user.notice : Added device handler type: veth
Wed Jun 21 22:29:46 2023 user.notice : Added device handler type: bridge
Wed Jun 21 22:29:46 2023 user.notice : Added device handler type: Network device
Wed Jun 21 22:29:46 2023 user.notice : Added device handler type: tunnel
Wed Jun 21 22:29:46 2023 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/network
Wed Jun 21 22:29:46 2023 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/wireless
Wed Jun 21 22:29:46 2023 user.notice ucitrack: Setting up /etc/config/luci-splash reload dependency on /etc/config/firewall
Wed Jun 21 22:29:46 2023 user.notice ucitrack: Setting up /etc/config/qos reload dependency on /etc/config/firewall
Wed Jun 21 22:29:46 2023 user.notice ucitrack: Setting up /etc/config/miniupnpd reload dependency on /etc/config/firewall
Wed Jun 21 22:29:46 2023 user.notice ucitrack: Setting up /etc/config/odhcpd reload dependency on /etc/config/dhcp
Wed Jun 21 22:29:46 2023 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Wed Jun 21 22:29:46 2023 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Wed Jun 21 22:29:46 2023 kern.info kernel: [   20.036357] br-lan: port 1(lan1) entered blocking state
Wed Jun 21 22:29:46 2023 kern.info kernel: [   20.036402] br-lan: port 1(lan1) entered disabled state
Wed Jun 21 22:29:46 2023 kern.info kernel: [   20.040618] device lan1 entered promiscuous mode
Wed Jun 21 22:29:46 2023 daemon.notice netifd: Interface 'lan' is enabled
Wed Jun 21 22:29:46 2023 daemon.notice netifd: Interface 'lan' is setting up now
Wed Jun 21 22:29:46 2023 daemon.notice netifd: Interface 'lan' is now up
Wed Jun 21 22:29:46 2023 kern.info kernel: [   20.054593] br-lan: port 2(lan2) entered blocking state
Wed Jun 21 22:29:46 2023 kern.info kernel: [   20.054640] br-lan: port 2(lan2) entered disabled state
Wed Jun 21 22:29:46 2023 kern.info kernel: [   20.058926] device lan2 entered promiscuous mode
Wed Jun 21 22:29:46 2023 kern.info kernel: [   20.066895] br-lan: port 3(lan3) entered blocking state
Wed Jun 21 22:29:46 2023 kern.info kernel: [   20.068710] br-lan: port 3(lan3) entered disabled state
Wed Jun 21 22:29:46 2023 kern.info kernel: [   20.073895] device lan3 entered promiscuous mode
Wed Jun 21 22:29:46 2023 user.notice ucitrack: Setting up /etc/config/luci_statistics reload dependency on /etc/config/system
Wed Jun 21 22:29:46 2023 kern.info kernel: [   20.081844] nss-dp 3a001600.dp4 lan4: PHY Link up speed: 1000
Wed Jun 21 22:29:46 2023 kern.info kernel: [   20.084359] br-lan: port 4(lan4) entered blocking state
Wed Jun 21 22:29:46 2023 kern.info kernel: [   20.089446] br-lan: port 4(lan4) entered disabled state
Wed Jun 21 22:29:46 2023 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/system
Wed Jun 21 22:29:46 2023 kern.info kernel: [   20.094627] device lan4 entered promiscuous mode
Wed Jun 21 22:29:46 2023 kern.info kernel: [   20.106657] br-lan: port 5(10g) entered blocking state
Wed Jun 21 22:29:46 2023 kern.info kernel: [   20.106701] br-lan: port 5(10g) entered disabled state
Wed Jun 21 22:29:46 2023 kern.info kernel: [   20.111122] device 10g entered promiscuous mode
Wed Jun 21 22:29:46 2023 daemon.notice netifd: Interface 'loopback' is enabled
Wed Jun 21 22:29:46 2023 daemon.notice netifd: Interface 'loopback' is setting up now
Wed Jun 21 22:29:46 2023 daemon.notice netifd: Interface 'loopback' is now up
Wed Jun 21 22:29:46 2023 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Wed Jun 21 22:29:47 2023 daemon.notice netifd: Interface 'wan' is enabled
Wed Jun 21 22:29:47 2023 daemon.notice netifd: Interface 'wan6' is enabled
Wed Jun 21 22:29:47 2023 daemon.notice netifd: Network device 'lan4' link is up
Wed Jun 21 22:29:47 2023 daemon.notice netifd: Network device 'lo' link is up
Wed Jun 21 22:29:47 2023 daemon.notice netifd: Interface 'loopback' has link connectivity
Wed Jun 21 22:29:47 2023 daemon.info procd: - init complete -
Wed Jun 21 22:29:47 2023 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy0.conf (phy phy0-ap0) --> new PHY
Wed Jun 21 22:29:47 2023 kern.info kernel: [   20.836034] br-lan: port 6(phy0-ap0) entered blocking state
Wed Jun 21 22:29:47 2023 kern.info kernel: [   20.836076] br-lan: port 6(phy0-ap0) entered disabled state
Wed Jun 21 22:29:47 2023 kern.info kernel: [   20.840633] device phy0-ap0 entered promiscuous mode
Wed Jun 21 22:29:47 2023 kern.info kernel: [   20.846172] br-lan: port 6(phy0-ap0) entered blocking state
Wed Jun 21 22:29:47 2023 kern.info kernel: [   20.851186] br-lan: port 6(phy0-ap0) entered forwarding state
Wed Jun 21 22:29:47 2023 daemon.notice hostapd: phy0-ap0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Jun 21 22:29:47 2023 daemon.notice netifd: bridge 'br-lan' link is up
Wed Jun 21 22:29:47 2023 daemon.notice netifd: Interface 'lan' has link connectivity
Wed Jun 21 22:29:47 2023 daemon.notice hostapd: phy0-ap0: interface state COUNTRY_UPDATE->HT_SCAN
Wed Jun 21 22:29:47 2023 kern.info kernel: [   20.857227] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Wed Jun 21 22:29:47 2023 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy1.conf (phy phy1-ap0) --> new PHY
Wed Jun 21 22:29:47 2023 kern.info kernel: [   20.885002] br-lan: port 7(phy1-ap0) entered blocking state
Wed Jun 21 22:29:47 2023 kern.info kernel: [   20.885048] br-lan: port 7(phy1-ap0) entered disabled state
Wed Jun 21 22:29:47 2023 kern.info kernel: [   20.889678] device phy1-ap0 entered promiscuous mode
Wed Jun 21 22:29:47 2023 kern.info kernel: [   20.895066] br-lan: port 7(phy1-ap0) entered blocking state
Wed Jun 21 22:29:47 2023 kern.info kernel: [   20.900182] br-lan: port 7(phy1-ap0) entered forwarding state
Wed Jun 21 22:29:47 2023 daemon.notice hostapd: phy1-ap0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Jun 21 22:29:47 2023 kern.info kernel: [   21.035721] br-lan: port 4(lan4) entered blocking state
Wed Jun 21 22:29:47 2023 kern.info kernel: [   21.035778] br-lan: port 4(lan4) entered forwarding state
Wed Jun 21 22:29:47 2023 kern.info kernel: [   21.040371] br-lan: port 6(phy0-ap0) entered disabled state
Wed Jun 21 22:29:47 2023 kern.info kernel: [   21.045508] br-lan: port 7(phy1-ap0) entered disabled state
Wed Jun 21 22:29:48 2023 kern.info kernel: [   21.284479] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap0: link becomes ready
Wed Jun 21 22:29:48 2023 kern.info kernel: [   21.284674] br-lan: port 7(phy1-ap0) entered blocking state
Wed Jun 21 22:29:48 2023 kern.info kernel: [   21.289940] br-lan: port 7(phy1-ap0) entered forwarding state
Wed Jun 21 22:29:48 2023 daemon.notice hostapd: phy1-ap0: interface state COUNTRY_UPDATE->ENABLED
Wed Jun 21 22:29:48 2023 daemon.notice hostapd: phy1-ap0: AP-ENABLED
Wed Jun 21 22:29:48 2023 daemon.notice hostapd: phy0-ap0: interface state HT_SCAN->DFS
Wed Jun 21 22:29:48 2023 daemon.notice hostapd: phy0-ap0: DFS-CAC-START freq=5500 chan=100 sec_chan=1, width=2, seg0=114, seg1=0, cac_time=60s
Wed Jun 21 22:29:48 2023 daemon.err hostapd: nl80211: kernel reports: (extension) channel is disabled
Wed Jun 21 22:29:48 2023 daemon.err hostapd: DFS start_dfs_cac() failed, -1
Wed Jun 21 22:29:48 2023 daemon.err hostapd: Interface initialization failed
Wed Jun 21 22:29:48 2023 daemon.notice hostapd: phy0-ap0: interface state DFS->DISABLED
Wed Jun 21 22:29:48 2023 daemon.notice hostapd: phy0-ap0: AP-DISABLED
Wed Jun 21 22:29:48 2023 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy2.conf (phy phy2-ap0) --> new PHY
Wed Jun 21 22:29:48 2023 kern.info kernel: [   21.803872] br-lan: port 8(phy2-ap0) entered blocking state
Wed Jun 21 22:29:48 2023 kern.info kernel: [   21.803919] br-lan: port 8(phy2-ap0) entered disabled state
Wed Jun 21 22:29:48 2023 kern.info kernel: [   21.808525] device phy2-ap0 entered promiscuous mode
Wed Jun 21 22:29:48 2023 kern.info kernel: [   21.813913] br-lan: port 8(phy2-ap0) entered blocking state
Wed Jun 21 22:29:48 2023 kern.info kernel: [   21.819048] br-lan: port 8(phy2-ap0) entered forwarding state
Wed Jun 21 22:29:48 2023 daemon.notice hostapd: phy2-ap0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Jun 21 22:29:48 2023 daemon.notice hostapd: phy2-ap0: interface state COUNTRY_UPDATE->HT_SCAN
Wed Jun 21 22:29:48 2023 daemon.notice netifd: Wireless device 'radio0' is now up
Wed Jun 21 22:29:48 2023 kern.info kernel: [   22.046149] br-lan: port 8(phy2-ap0) entered disabled state
Wed Jun 21 22:29:49 2023 daemon.notice hostapd: phy2-ap0: interface state HT_SCAN->DFS
Wed Jun 21 22:29:49 2023 daemon.notice hostapd: phy2-ap0: DFS-CAC-START freq=5180 chan=36 sec_chan=1, width=2, seg0=50, seg1=0, cac_time=60s
Wed Jun 21 22:29:49 2023 daemon.err hostapd: nl80211: kernel reports: (extension) channel is disabled
Wed Jun 21 22:29:49 2023 daemon.err hostapd: DFS start_dfs_cac() failed, -1
Wed Jun 21 22:29:49 2023 daemon.err hostapd: Interface initialization failed
Wed Jun 21 22:29:49 2023 daemon.notice hostapd: phy2-ap0: interface state DFS->DISABLED
Wed Jun 21 22:29:49 2023 daemon.notice hostapd: phy2-ap0: AP-DISABLED
Wed Jun 21 22:29:49 2023 daemon.notice netifd: Wireless device 'radio1' is now up
Wed Jun 21 22:29:49 2023 daemon.notice netifd: Network device 'phy1-ap0' link is up
Wed Jun 21 22:31:41 2023 daemon.warn odhcpd[1974]: No default route present, overriding ra_lifetime!
Wed Jun 21 22:31:41 2023 daemon.notice netifd: Wireless device 'radio2' is now up
Wed Jun 21 22:31:42 2023 daemon.err uhttpd[2103]: [info] luci: accepted login on / for root from 192.168.1.100
Wed Jun 21 22:31:43 2023 daemon.warn odhcpd[1974]: No default route present, overriding ra_lifetime!
Wed Jun 21 22:31:45 2023 daemon.warn odhcpd[1974]: No default route present, overriding ra_lifetime!
GL.iNet GL-MT6000 + 2x AP_Xiaomi AX3000T

25 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,944

Odp: Zyxel NBG7815 (Armor G5)

On twierdzi inaczej w logach. Zrestartowałeś go?

W ogóle to oba radia potrafią pełne zakresy kanałów czy jedno jest na niższe a drugie na wyższe kanały? Wylistuj je sobie i zobacz (polecenie iw list)

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona