Temat: Brak LTE w ZTE MF286D z Nju mobile
Witam, mam ZTE MF286D z Openwrt 22.03.3
Interfejs QMI (o nazwie "LTE") ustawiłem zgodnie z tym co podaje nju mobile:
Na stronie nju mobile:
* Nazwa konfiguracji: Internet IPv6
* APN (punkt dostępu): internetipv6
* Nazwa użytkownika: internetipv6
* Hasło: internetipv6
* Uwierzytelnianie: PAP
* Typ APN: default,supl
* Protokół APN: IPv6
* Protokół APN podczas roamingu: IPv4
root@OpenWrt:~# uci show network
network.loopback=interface
network.loopback.device='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.globals=globals
network.@device[0]=device
network.@device[0].name='br-lan'
network.@device[0].type='bridge'
network.@device[0].ports='eth0'
network.lan=interface
network.lan.device='br-lan'
network.lan.proto='static'
network.lan.netmask='255.255.255.0'
network.lan.ip6assign='60'
network.lan.ipaddr='192.168.33.1'
network.lan.ipv6='0'
network.lan.delegate='0'
network.@switch[0]=switch
network.@switch[0].name='switch0'
network.@switch[0].reset='1'
network.@switch[0].enable_vlan='1'
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device='switch0'
network.@switch_vlan[0].vlan='1'
network.@switch_vlan[0].ports='2 3 4 0'
network.@switch_vlan[1]=switch_vlan
network.@switch_vlan[1].device='switch0'
network.@switch_vlan[1].vlan='2'
network.@switch_vlan[1].ports='5 0'
network.LTE=interface
network.LTE.proto='qmi'
network.LTE.device='/dev/cdc-wdm0'
network.LTE.pincode='4807'
network.LTE.delay='30'
network.LTE.apn='internetipv6'
network.LTE.auth='pap'
network.LTE.username='internetipv6'
network.LTE.password='internetipv6'
network.LTE.pdptype='ipv6'
W logach pojawiają się takie błędy:
Tue Feb 21 17:08:07 2023 daemon.notice netifd: LTE (6603): Waiting for SIM initialization
Tue Feb 21 17:08:08 2023 daemon.notice netifd: LTE (6603): Failed to parse message data
Tue Feb 21 17:08:08 2023 daemon.notice netifd: LTE (6603): PIN already verified
Tue Feb 21 17:08:09 2023 daemon.notice netifd: LTE (6603): Device does not support 802.3 mode. Informing driver of raw-ip only for wwan0 ..
Tue Feb 21 17:08:09 2023 daemon.notice netifd: LTE (6603): Waiting for network registration
Tue Feb 21 17:08:11 2023 daemon.notice netifd: LTE (6603): Starting network LTE
Tue Feb 21 17:08:11 2023 daemon.notice netifd: LTE (6603): Unable to connect IPv6
Tue Feb 21 17:08:11 2023 daemon.notice netifd: LTE (6702): Stopping network LTE
Tue Feb 21 17:08:11 2023 daemon.notice netifd: LTE (6702): Command failed: ubus call network.interface notify_proto { "action": 0, "link-up": false, "keep": false, "interface": "LTE" } (Permission denied)
Uqmi pokazuje coś takiego:
root@OpenWrt:~# uqmi -d /dev/cdc-wdm0 --get-current-settings
{
"pdp-type": "ipv4",
"ip-family": "ipv4",
"mtu": 1500,
"ipv4": {
"ip": "10.52.222.197",
"dns1": "194.204.159.1",
"dns2": "194.204.152.34",
"gateway": "10.52.222.198",
"subnet": "255.255.255.252"
},
"ipv6": {},
"domain-names": {}
}root@OpenWrt:~# uqmi -d /dev/cdc-wdm0 --get-data-status
"connected"root@OpenWrt:~# uqmi -d /dev/cdc-wdm0 --get-serving-system
{
"registration": "registered",
"plmn_mcc": 260,
"plmn_mnc": 3,
"plmn_description": "Oy�}.\u0003",
"roaming": false
}
Więc niby wygląda jakbym się połączył z operatorem, jednak internetu nie ma...
Mógłby ktoś podpowiedzieć co tu jest nie tak?
