Temat: Ethernet over Coax EoC 2-31 G.hn Coax Peer to Peer WiFi openwrt?

Wyciągam ze swojego magicznego kartonu kolejną zabawkę. Urządzonko służy do pchania neta przez koncentryka.
Niestety nie mam jak tego przetestować bo do tanga trzeba dwojga;)

Ale jak już to odpaliłem to porty lan żyją i wifi też. Dostaje tez swój adres Ip od dawcy routera czyli jak w jeden z portów wepnę lan od głównego routera a do drugiego lapka to też dostaję ip od dawcy czyli ten jest taki przezroczysty.
Najciekawszy jest log w ów sprzętu. Wklejam zdjęcia i treść logu dla potomnych. Może openwrt na to wtedy nadałby się na AP w sumie teraz też ale ale na openwrt nowszym miałbym więcej opcji smile No i procek taki w miarę miarę...

P.S. jak ktoś ma takie drugie to niech się odezwie do mnie chętnie bym przetestował czy moja sztuka jest sprawna. Mogę tez ją sprzedać komuś jak ktoś chce oczywiście po przetestowaniu czy sprawne

To coś ma dwa uartu ale na tym drugim pluje jakimiś danymi ze strony koncentryka wiec nie wrzucam tego. Log poniżej z pierwszego uarta jest dla nas bardziej przyjazny

https://i.ibb.co/0s1Xw4T/20230112-140339.jpg
https://i.ibb.co/xJmhX0T/20230112-140350.jpg
https://i.ibb.co/QpsjtwZ/20230112-140305.jpg
https://i.ibb.co/gzLC4v4/20230112-130840.jpg
https://i.ibb.co/RQv9kfH/20230112-130856.jpg
https://i.ibb.co/0Fn63xC/20230112-130915.jpg
https://i.ibb.co/QQyxQhJ/20230112-130925.jpg
https://i.ibb.co/Fzc7fDv/20230112-130934.jpg
https://i.ibb.co/T1fYLC5/20230112-130951.jpg
https://i.ibb.co/r7T820Q/20230112-131000.jpg

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00126
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000021
S - Reset status Config, 0x00000000
S - Core 0 Frequency, 0 MHz
B -       261 - PBL, Start
B -      1339 - bootable_media_detect_entry, Start
B -      1679 - bootable_media_detect_success, Start
B -      1693 - elf_loader_entry, Start
B -      5076 - auth_hash_seg_entry, Start
B -      7224 - auth_hash_seg_exit, Start
B -    578350 - elf_segs_hash_verify_entry, Start
B -    696522 - PBL, End
B -    696546 - SBL1, Start
B -    787348 - pm_device_init, Start
D -         7 - pm_device_init, Delta
B -    788814 - boot_flash_init, Start
D -     52776 - boot_flash_init, Delta
B -    845730 - boot_config_data_table_init, Start
D -      3835 - boot_config_data_table_init, Delta - (419 Bytes)
B -    852945 - clock_init, Start
D -      7553 - clock_init, Delta
B -    864970 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
B -    868384 - sbl1_ddr_set_params, Start
B -    873481 - cpr_init, Start
D -         2 - cpr_init, Delta
B -    877863 - Pre_DDR_clock_init, Start
D -         4 - Pre_DDR_clock_init, Delta
D -     13177 - sbl1_ddr_set_params, Delta
B -    891601 - pm_driver_init, Start
D -         2 - pm_driver_init, Delta
B -    961821 - sbl1_wait_for_ddr_training, Start
D -        28 - sbl1_wait_for_ddr_training, Delta
B -    977252 - Image Load, Start
D -    152985 - QSEE Image Loaded, Delta - (299560 Bytes)
B -   1130664 - Image Load, Start
D -      1443 - SEC Image Loaded, Delta - (2048 Bytes)
B -   1141075 - Image Load, Start
D -    211575 - APPSBL Image Loaded, Delta - (432919 Bytes)
B -   1353047 - QSEE Execution, Start
D -        60 - QSEE Execution, Delta
B -   1359266 - SBL1, End
D -    664828 - SBL1, Delta
S - Flash Throughput, 2009 KB/s  (734946 Bytes,  365809 us)
S - DDR Frequency, 537 MHz


U-Boot 2012.07 [Chaos Calmer 15.05.1,f53cef1+r49254] (Dec 12 2019 - 09:39:35)

smem ram ptable found: ver: 1 len: 3
DRAM:  256 MiB
machid : 0x8010000
NAND:  SF: Detected MX25L25635E with page size 4 KiB, total 32 MiB
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x2000000
32 MiB
MMC:
In:    serial
Out:   serial
Err:   serial
machid: 8010000
flash_type: 0
Hit any key to stop autoboot:  0
SF: Detected MX25L25635E with page size 4 KiB, total 32 MiB
## Booting kernel from FIT Image at 84000000 ...
   Using 'config@ap.dk01.1-c1' configuration
   Trying 'kernel@1' kernel subimage
     Description:  ARM OpenWrt Linux-4.4.60
     Type:         Kernel Image
     Compression:  gzip compressed
     Data Start:   0x840000e4
     Data Size:    3794328 Bytes = 3.6 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x80208000
     Entry Point:  0x80208000
     Hash algo:    crc32
     Hash value:   96802eab
     Hash algo:    sha1
     Hash value:   c3771f1bfa6aaf897a8b78efd7fa9ee087ddbfe9
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Flattened Device Tree from FIT Image at 84000000
   Using 'config@ap.dk01.1-c1' configuration
   Trying 'fdt@ap.dk01.1-c1' FDT blob subimage
     Description:  ARM OpenWrt qcom-ipq40xx-ap.dkxx device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x843c66b8
     Data Size:    18058 Bytes = 17.6 KiB
     Architecture: ARM
     Hash algo:    crc32
     Hash value:   d2aea866
     Hash algo:    sha1
     Hash value:   b19a6640a4c1609919bf55edd9465276d4171e02
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x843c66b8
   Uncompressing Kernel Image ... OK
   Loading Device Tree to 86ff8000, end 86fff689 ... OK
Using machid 0x8010000 from environment

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.60 (wifi@u5) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 f53cef1+r49254) ) #357 SMP PREEMPT Tue May 26 14:52:07 CST 2020
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] PERCPU: Embedded 12 pages/cpu @cfd7a000 s19328 r8192 d21632 u49152
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60864
[    0.000000] Kernel command line: console=ttyMSM0,115200n8 rootfsname=rootfs rootwait clk_ignore_unused
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 235156K/245760K available (5304K kernel code, 339K rwdata, 1788K rodata, 232K init, 247K bss, 10604K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0208000 - 0xc08f544c   (7094 kB)
[    0.000000]       .init : 0xc08f6000 - 0xc0930000   ( 232 kB)
[    0.000000]       .data : 0xc0930000 - 0xc0984e28   ( 340 kB)
[    0.000000]        .bss : 0xc0987000 - 0xc09c4e1c   ( 248 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] Architected cp15 timer(s) running at 48.00MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns
[    0.000008] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns
[    0.000023] Switching to timer-based delay loop, resolution 20ns
[    0.000257] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
[    0.000275] pid_max: default: 32768 minimum: 301
[    0.000411] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000424] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001183] Initializing cgroup subsys memory
[    0.001225] Initializing cgroup subsys devices
[    0.001241] Initializing cgroup subsys pids
[    0.001271] CPU: Testing write buffer coherency: ok
[    0.001652] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001746] Setting up static identity map for 0x80208280 - 0x802082d8
[    0.052978] MSM Memory Dump base table set up
[    0.053021] MSM Memory Dump apps data table set up
[    0.091099] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.121139] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.151214] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.151313] Brought up 4 CPUs
[    0.151343] SMP: Total of 4 processors activated (384.00 BogoMIPS).
[    0.151351] CPU: All CPU(s) started in SVC mode.
[    0.157828] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.158255] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.158291] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.158906] pinctrl core: initialized pinctrl subsystem
[    0.160516] NET: Registered protocol family 16
[    0.162148] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[    0.190435] cpuidle: using governor ladder
[    0.220468] cpuidle: using governor menu
[    0.232606] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 2
[    0.232614] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 1
[    0.232620] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 3
[    0.232625] hw-breakpoint: CPU 1 failed to disable vector catch
[    0.232657] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
[    0.234488] CPU: IPQ4018, SoC Version: 1.0
[    0.234615] <CORE> glink_init: IPC Logging Disabled
[    0.235335] IPC logging disabled
[    0.235346] IPC logging disabled
[    0.235353] IPC logging disabled
[    0.235359] IPC logging disabled
[    0.235365] IPC logging disabled
[    0.235619] sps:sps is ready.
[    0.272701] SCSI subsystem initialized
[    0.274606] Advanced Linux Sound Architecture Driver Initialized.
[    0.275637] clocksource: Switched to clocksource arch_sys_counter
[    0.277400] NET: Registered protocol family 2
[    0.278435] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.278481] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[    0.278529] TCP: Hash tables configured (established 2048 bind 2048)
[    0.278593] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.278626] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.278893] NET: Registered protocol family 1
[    0.279532] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    0.291853] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.291875] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.297362] Key type asymmetric registered
[    0.297386] Asymmetric key parser 'x509' registered
[    0.297438] io scheduler noop registered
[    0.297453] io scheduler deadline registered (default)
[    0.302764] NET: Registered protocol family 27
[    0.302780] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled
[    0.302803] qmi_log_init: IPC Logging disabled
[    0.302810] qmi_log_init: IPC Logging disabled
[    0.303324] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
[    0.303386] tcsr 1953000.ess_tcsr: setting ess interface select = 0
[    0.303455] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
[    0.303513] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
[    0.303817] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set
[    0.304607] msm_serial 78af000.serial: msm_serial: detected port #0
[    0.304658] msm_serial 78af000.serial: uartclk = 1843200
[    0.304709] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 25, base_baud = 115200) is a MSM
[    0.304744] msm_serial: console setup on port #0
[    0.918494] console [ttyMSM0] enabled
[    0.923538] msm_serial: driver initialized
[    0.927011] msm_serial_hsl_init: driver initialized
[    0.944787] brd: module loaded
[    0.945820] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    0.948735] m25p80 spi0.0: found mx25l25635e, expected n25q128a11
[    0.953951] m25p80 spi0.0: mx25l25635e (32768 Kbytes)
[    0.960100] 10 ofpart partitions found on MTD device spi0.0
[    0.964965] Creating 10 MTD partitions on "spi0.0":
[    0.970434] 0x000000000000-0x000000040000 : "0:SBL1"
[    0.976534] 0x000000040000-0x000000060000 : "0:MIBIB"
[    0.981627] 0x000000060000-0x0000000c0000 : "0:QSEE"
[    0.986609] 0x0000000c0000-0x0000000d0000 : "0:CDT"
[    0.991589] 0x0000000d0000-0x0000000e0000 : "0:DDRPARAMS"
[    0.996152] 0x0000000e0000-0x0000000f0000 : "0:APPSBLENV"
[    1.001700] 0x0000000f0000-0x000000170000 : "0:APPSBL"
[    1.007144] 0x000000170000-0x000000180000 : "0:ART"
[    1.012103] 0x000000180000-0x000000580000 : "0:HLOS"
[    1.016977] 0x000000580000-0x000001b80000 : "rootfs"
[    1.022125] mtd: device 9 (rootfs) set to be root filesystem
[    1.026119] 1 squashfs-split partitions found on MTD device rootfs
[    1.031554] 0x000001290000-0x000001b80000 : "rootfs_data"
[    1.039684] libphy: Fixed MDIO Bus: probed
[    1.263755] qca-mdio 90000.mdio: Could not find phy-reset-gpio
[    1.263970] libphy: qca_mdio: probed
[    1.270618] qca-mdio 90000.mdio: qca-mdio driver was registered
[    1.272310] Unable to create IPC log context!
[    1.278174] i2c /dev entries driver
[    1.284669] sdhci: Secure Digital Host Controller Interface driver
[    1.285753] sdhci: Copyright(c) Pierre Ossman
[    1.291922] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.297182]
[    1.297182] Version Rollback Feature Disabled
[    1.308530] NET: Registered protocol family 10
[    1.309719] NET: Registered protocol family 17
[    1.312220] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.316738] Bridge firewalling registered
[    1.329365] 8021q: 802.1Q VLAN Support v1.8
[    1.333392] Registering SWP/SWPB emulation handler
[    1.339221] hctosys: unable to open rtc device (rtc0)
[    1.346396] clk: Not disabling unused clocks
[    1.347215] ALSA device list:
[    1.351541]   No soundcards found.
[    1.360599] VFS: Mounted root (squashfs filesystem) readonly on device 31:9.
[    1.361214] Freeing unused kernel memory: 232K (c08f6000 - c0930000)
[    2.295031] init: Console is alive
[    2.295239] init: - watchdog -
[    4.307711] random: nonblocking pool is initialized
[    5.165017] Button Hotplug driver version 0.4.1
[    5.298480] init: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
Before mount_root
[    7.946587] jffs2: notice: (132) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    7.950352] mount_root: switching to jffs2 overlay
After mount_root
377+0 records in
377+0 records out
12064 bytes (11.8KB) copied, 0.034667 seconds, 339.8KB/s
377+0 records in
377+0 records out
12064 bytes (11.8KB) copied, 0.029333 seconds, 401.6KB/s
[    8.090845] procd: - early -
[    8.090975] procd: - watchdog -
[    8.850795] procd: - ubus -
[    9.854158] procd: - init -
Please press Enter to activate this console.
[   11.506152] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
[   11.506599] QCE50: __qce_init_clk: Unable to get CE core src clk, set to NULL
[   11.513738] qcrypto 8e20000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x8e20000
[   11.521182] qcrypto 8e20000.qcrypto: CE device = 0x0
[   11.521182] , IO base, CE = 0xd1040000
[   11.521182] , Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
[   11.521182] IO base BAM = 0x  (null)
[   11.521182] BAM IRQ 24
[   11.521182] Engines Availability = 0x2010453
[   11.530815] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x08e04000
[   11.553062] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x08e04000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x08e04000
[   11.568809] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x08e04000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x08e04000
[   11.583304] sps:BAM 0x08e04000 is registered.[   11.590167] sps:BAM 0x08e04000 (va:0xd10c0000) enabled: ver:0x27, number of pipes:4
[   11.594192] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000008e04000 irq 24
[   11.603963] bus_scale_table is NULL
[   11.609509] qcrypto 8e20000.qcrypto: qcrypto-ecb-aes
[   11.612766] qcrypto 8e20000.qcrypto: qcrypto-cbc-aes
[   11.617994] qcrypto 8e20000.qcrypto: qcrypto-ctr-aes
[   11.622905] qcrypto 8e20000.qcrypto: qcrypto-ecb-des
[   11.627886] qcrypto 8e20000.qcrypto: qcrypto-cbc-des
[   11.632805] qcrypto 8e20000.qcrypto: qcrypto-ecb-3des
[   11.637779] qcrypto 8e20000.qcrypto: qcrypto-cbc-3des
[   11.642697] qcrypto 8e20000.qcrypto: qcrypto-xts-aes
[   11.647759] qcrypto 8e20000.qcrypto: qcrypto-sha1
[   11.652765] qcrypto 8e20000.qcrypto: qcrypto-sha256
[   11.657398] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
[   11.662060] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
[   11.668330] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
[   11.674555] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
[   11.681183] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
[   11.687523] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
[   11.693925] qcrypto 8e20000.qcrypto: qcrypto-hmac-sha1
[   11.700366] qcrypto 8e20000.qcrypto: qcrypto-hmac-sha256
[   11.705461] qcrypto 8e20000.qcrypto: qcrypto-aes-ccm
[   11.710951] qcrypto 8e20000.qcrypto: qcrypto-rfc4309-aes-ccm
[   11.728370] nf_conntrack version 0.5.0 (3677 buckets, 14708 max)
[   11.736922] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[   11.745253] Initializing XFRM netlink socket
[   11.746962] NET: Registered protocol family 15
[   12.191658] ssdk_switch_device_num_init[1031]:INFO:ess-switch dts node number: 1
[   12.195365] ssdk_dt_get_switch_node[870]:INFO:ess-switch DT exist!
[   12.202373] ssdk_dt_parse_access_mode[771]:INFO:switch_access_mode: local bus
[   12.208558] ssdk_dt_parse_access_mode[784]:INFO:switchreg_base_addr: 0xc000000
[   12.215664] ssdk_dt_parse_access_mode[785]:INFO:switchreg_size: 0x80000
[   12.222853] ssdk_dt_parse_mac_mode[235]:INFO:mac mode = 0x13
[   12.229122] ssdk_dt_parse_mac_mode[241]:INFO:mac mode1 doesn't exit!
[   12.234745] ssdk_dt_parse_mac_mode[250]:INFO:mac mode2 doesn't exit!
[   12.241083] ssdk_dt_parse_phy_info[508]:INFO:qcom,port_phyinfo DT doesn't exist!
[   12.247450] ssdk_dt_parse_mdio[598]:INFO:mdio DT exist!
[   12.255047] fgNatMode[652]:INFO:/etc/config/natdtsi:
config opmode
        option mode 'bridge'

[   12.258975] fgNatMode[664]:INFO:Bridge mode.
[   12.268021] ssdk_dt_parse_led[844]:INFO:current dts led_source_num is 0
[   12.272956] ssdk_dt_parse_psgmii[736]:INFO:ess-psgmii DT exist!
[   12.279901] ssdk_plat_init start
[   12.281920] ssdk_plat_init[1231]:ERROR:enable ess clk
[   12.350148] malibu_phy_api_ops_init[2583]:INFO:qca probe malibu phy driver succeeded!
[   12.456687] malibu_phy_hw_init[2506]:INFO:malibu_phy_hw_init(dev_id=0) set phy=4 mac_mode=PORT_WRAPPER_PSGMII_FIBER(19)
[   12.459674] regi_init[3332]:INFO:Initializing DESS!!
[   14.155482] ssdk_switch_register[1611]:INFO:Chip version 0x1401
[   14.158513] qca_link_polling_select[1273]:INFO:link-polling-required node does not exist
[   14.164712] ssdk_switch_register[1636]:INFO:polling is selected
[   14.172438] regi_init[3341]:INFO:Initializing DESS Done!!
[   14.177404] regi_init[3370]:INFO:qca-ssdk module init succeeded!
[   14.200020] **********************************************************
[   14.200055] * Driver    :NSS GMAC Driver - RTL v(3.72a)
[   14.205440] * Version   :1.0
[   14.210622] * Copyright :Copyright (c) 2013-2018 The Linux Foundation. All rights reserved.
[   14.213693] **********************************************************
[   14.241682] l2tp_core: L2TP core driver, V2.0
[   14.242912] l2tp_netlink: L2TP netlink interface
[   14.319317] qca-nss-drv.ko is loaded for symbol link
[   14.321430] sit: IPv6 over IPv4 tunneling driver
[   14.327053] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded.
[   14.332403] gre: GRE over IPv4 demultiplexor driver
[   14.337565] ip_gre: GRE over IPv4 tunneling driver
[   14.344730] ip6_gre: GRE over IPv6 tunneling driver
[   14.361453] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[   14.380193] QCA multicast snooping installed successfully
[   14.384516] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.396386] edma_axi.c: fgNatMode: /etc/config/natdtsi:
[   14.396386] config opmode
[   14.396386]         option mode 'bridge'
[   14.396386]
[   14.396449] edma_axi_probe: natmode = false
[   14.431614] PPP generic driver version 2.4.2
[   14.434958] nss_lag_init[354]:LAG Manager Installed
[   14.438175] NET: Registered protocol family 24
[   14.441311] PPTP driver version 0.8.5
[   14.448822] <NSS-CRYPTO>:module loaded (platform - IPQ806x, build - Build_ID - 05/26/20, 14:50:46)
[   14.448969] <NSS-CRYPTO>:qca-nss-crypto.ko is loaded for symbol link
[   14.458199] crypto bench loaded - Build_ID - 05/26/20, 14:50:47
[   14.463370] nss_crypto_register_user[151]:bf3fe58c: Crypto Device is not ready
[   14.479242] nss_macsec init success
[   14.487640] nss_crypto_register_user[151]:bf3fe58c: Crypto Device is not ready
[   14.491082] nss is not enabled on this platform
[   14.493767] nss_ipsecmgr_init[1262]:NSS is not enabled in this platform
[   14.502850] nss_crypto_register_user[151]:bf3fe58c: Crypto Device is not ready
[   14.506152] nss is not enabled on this platform
[   14.519975] u32 classifier
[   14.520002]     input device check on
[   14.521570]     Actions configured
[   14.527318] Mirror/redirect action on
[   14.560535] fuse init (API version 7.23)
[   14.565379] arp_tables: (C) 2002 David S. Miller
[   14.570519] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.578188] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   14.657552] nf_conntrack_rtsp v0.6.21 loading
[   14.842419] nf_nat_rtsp v0.6.21 loading
[   14.849757] PPP MPPE Compression module registered
[   14.890428] xt_time: kernel timezone is -0000
[   17.025274] Not a bridge device, or device not found: br-lan
[   19.382728] mem_manager: module license 'unspecified' taints kernel.
[   19.382763] Disabling lock debugging due to kernel taint
[   19.432665] ath_dfs: Version 2.0.0
[   19.432665] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
[   19.445223] ath_spectral: Version 2.0.0
[   19.445223] Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved
[   21.801262] ath_hal: 0.9.17.1 (AR5416, AR9380, WRITE_EEPROM, 11D)
[   21.818596] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
[   21.828322] ath_tx99: Version 2.0
[   21.828322] Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved
[   21.884101] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
[   21.949411] ath_da_pci:  (Atheros/multi-bss)
[   22.888500]  *********** IPQ4019  *************Wifi0 CPU frequency 250000000
[   22.911905] hif_target_sync_ahb: Got FW signal, retries = 1hif_ahb_enable_bus: X - hif_type = 0xd, target_type = 0xbhif_config_ce: ce_init donehif_config_ce: X, ret = 0hif_set_hia: Ehif_set_hia_extnd: E
[   22.930094] chip_id 0xb chip_revision 0x0
[   22.930970]
[   22.930970]  CLOCK PLL skipped
[   22.934967] hif_set_hia_extnd: setting the target pll frac ffffffff intval ffffffff
[   22.939330] hif_set_hia_extnd: no frac provided, skipping pre-configuring PLL
[   22.949044] hif_pci_bus_configure: hif_set_hia donehif_configure_irq: Ehif_enable: X OKhif_napi_create: NAPI structures initializedhif_napi_create: NAPI id 6 created for pipe 5qca_napi_create: napi instance 32 created on pipe 4
[   22.969863] hif_napi_event: received evnt: CONF cmd; v = 1 (state=0x1)hif_napi_event: setting configuration to ON
__ol_ath_attach() Allocated scn cc840500
[   22.984394] nss is not enabled on this platform
[   22.988111] nss register id -1 offload mode enabled = 0 nss config 0 Target Type b
[   22.992634] __ol_ath_attach: dev name wifi0
[   23.000265] ol_ath_attach interface_id 0
[   23.014694] ol_target_init() BMI inited.
[   23.014814] ol_target_init() BMI Get Target Info.
[   23.017724] Chip id: 0xb, chip version: 0x1000000
[   23.022280]
[   23.022280]  CE WAR Disabled
[   23.027150] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
[   23.031490] ol_target_init() configure Target .
[   23.036802]
[   23.036802]  Target Version is 1000000
[   23.041033]
[   23.041033]  Flash Download Address  c0000
[   23.046264] ol_transfer_bin_file: flash data file defined
[   23.052146] ol_transfer_bin_file[3819] Get Caldata for wifi0.
[   23.057524] qdf_fs_read[66], Open File /tmp/wifi0.caldata SUCCESS!!file system magic:16914836super blocksize:4096inode 875file size:12064qc98xx_verify_checksum: flash checksum passed: 0x123b
[   23.075235] ol_transfer_bin_file 3879: Download Flash data len 12064
[   23.080286] Board extended Data download address: 0x0
[   23.106091]
[   23.106091]  Board data initialized
[   23.106276] ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000
[   23.110127]
[   23.110127]  Selecting  OTP binary for CHIP Version -1079300376
[   23.145063] ol_transfer_bin_file 3701: downloading file 0, Download data len 4676
[   23.161507]
[   23.161507]  First OTP send param 8000
[   23.166205] ol_ath_download_firmware :First OTP download and Execute is good address:0x6000 return param 4660
[   23.166237] ol_ath_download_firmware:##Board Id 24 , CHIP Id 0
[   23.175734] ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000
[   23.181348]
[   23.181348]  wifi0: Selecting board data file name boardData_1_0_IPQ4019_YA131_wifi0.bin
[   23.188229] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=IPQ4019/hw.1/boardData_1_0_IPQ4019_YA131_wifi0.bin
[   23.198270] ol_transfer_bin_file 3701: downloading file 3, Download data len 12064
[   23.210541] Board extended Data download address: 0x0
[   23.237555] ol_ath_download_firmware: Using 0x1234 for the remainder of init
[   23.237585]
[   23.237585]  Selecting  OTP binary for CHIP Version -1079300376
[   23.243817] ol_transfer_bin_file 3701: downloading file 0, Download data len 4676
[   23.267418]
[   23.267418]  [Flash] : Ignore Module param
[   23.267448]
[   23.267448]  Second otp download Param 10000
[   23.282102] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
[   23.282142]
[   23.282142]  Mission mode: Firmware CHIP Version -1079300376
[   23.437632] ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144
[   23.438181] ol_swap_wlan_memory_expansion: length:201359 size_left:201379 dma_size_left:262144 fw_temp:d2022004 fw_entry_size:201383
[   23.444113] ol_swap_wlan_memory_expansion: dma_virt_addr :d1fe1000 fw_temp: d2022008 length: 201359
[   23.456517] Swap: bytes_left to copy: fw:16; dma_page:60785
[   23.464937] ol_swap_wlan_memory_expansion: length:0 size_left:12 dma_size_left:60785 fw_temp:d205329b fw_entry_size:201383
[   23.470579] Swap: wrong length read:0
[   23.481629] ol_swap_wlan_memory_expansion: Swap total_bytes copied: 201359 Target address 417d70
[   23.485455] scn=cc840500  target_write_addr=417d70 seg_info=cf161d10
[   23.494215] ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2
[   23.500637] bin_filename=IPQ4019/hw.1/athwlan.bin swap_filename=/lib/firmware/IPQ4019/hw.1/athwlan.codeswap.bin
[   23.509578] ol_transfer_bin_file: Downloading firmware file: IPQ4019/hw.1/athwlan.bin
[   23.896471] ol_transfer_bin_file 3701: downloading file 1, Download data len 384380
[   25.166918] ol_target_init() Download FW done.
[   25.166981]
[   25.166981] ol_ath_copy_tgt_iram() iram read paddr: 0x980000 host paddr 0x87500000 Radio id 0
[   25.335731] ol_ath_attach() WMI attached. wmi_handle cccb0000
[   25.335770] wmi_unified_register_event_handler: Event id 62 is unavailable
[   25.340464] +htc_create ..  HIF :cceb8000-htc_create: (0xced70000)
[   25.351048] htc_wmi_init() HT Create . ced70000
[   25.353683] htc_wmi_init 8429 host_enable 0 nss_nwifi_offload 0
[   25.357986] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
[   25.363824]  OL_ACBKMinfree : 0
[   25.373214]  OL_ACBEMinfree : 0
[   25.376325]  OL_ACVIMinfree : 0
[   25.379429]  OL_ACVOMinfree : 0
[   25.382559] hif_enable_fastpath, Enabling fastpath mode
[   25.385703] +HWT
[   25.391070] hif_completion_thread_startup: pipe_num:0 pipe_info:0xccebcb78hif_completion_thread_startup: pipe_num:3 pipe_info:0xccebcc50hif_completion_thread_startup: pipe_num:4 pipe_info:0xccebcc98
[   25.409438] -HWT
[   25.410576] Startup Mode-0 set
[   25.412420] pdev attach 00000000 -1
[   25.415286]
[   25.415286] <=== cfg max peer id 1056 ====>
[   25.419836] htt_peer_map_timer_init Enter pdev cc550000 hrtimer cc554948
[   25.424669]
[   25.424669]  htt_alloc_peer_map_mem : Alloc Success : host q vaddr cc55a000 paddr 8c55a000
[   25.431391]
[   25.431391]  htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
[   25.444035] ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from cc1e0000
[   25.451775] Firmware_Build_Number:83
[   25.457249] FW wireless modes: 0x680c
[   25.460946] num_rf_chain:0x00000002  ht_cap_info:0x0000085b  vht_cap_info:0x339959b2  vht_supp_mcs:0x0000fffa
[   25.472409] btcoex_support 0, wlan_prio_gpio 0, coex_gpio_pin 0 0 0
[   25.474577] wmi_service_coex_gpio 1, wmi_service_4_wire_coex_support 1, coex_version 0
[   25.480590]
[   25.480590] Sending Ext resource cfg: HOST PLATFORM as 0
[   25.480590] fw_feature_bitmap as 50 to TGT
[   25.488626] ol_ath_service_ready_event: tt_support: 1
[   25.499591] ol_ath_service_ready_event: periodic_chan_stats: 1
[   25.504524] ol_ath_service_ready_event: sw_cal_support_check_flag: 1
[   25.510271] Peer Caching Enabled ; num_peers = 530, num_active_peers = 52 num_tids = 104, num_vdevs = 17
[   25.516825] EXT NSS Supported
[   25.526253] idx 1 req 2  num_units 1 num_unit_info 12 unit size 256 actual units 53
[   25.529141] ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256,
[   25.536926] idx 2 req 3  num_units 1 num_unit_info 12 unit size 1024 actual units 53
[   25.544345] ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024,
[   25.552115] idx 3 req 4  num_units 1 num_unit_info 12 unit size 4096 actual units 53
[   25.559753] ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096,
[   25.567480] idx 8 req 9  num_units 1 num_unit_info 8 unit size 819200 actual units 1
[   25.575524] ol_ath_alloc_host_mem_chunk req_id 9 idx 3 num_units 1 unit_len 819200,
[   25.582843] idx 0 req 1  num_units 0 num_unit_info 2 unit size 744 actual units 531
[   25.590623] ol_ath_alloc_host_mem_chunk req_id 1 idx 4 num_units 531 unit_len 744,
[   25.598296] idx 4 req 6  num_units 35 num_unit_info 0 unit size 3072 actual units 35
[   25.605771] ol_ath_alloc_host_mem_chunk req_id 6 idx 5 num_units 35 unit_len 3072,
[   25.613555] idx 5 req 7  num_units 1 num_unit_info 0 unit size 6144 actual units 1
[   25.621119] ol_ath_alloc_host_mem_chunk req_id 7 idx 6 num_units 1 unit_len 6144,
[   25.628593] idx 6 req 5  num_units 0 num_unit_info 2 unit size 2060 actual units 531
[   25.637172] ol_ath_alloc_host_mem_chunk req_id 5 idx 7 num_units 531 unit_len 2060,
[   25.644024] Support not added yet for Service 91
[   25.651500] Support not added yet for Service 92
[   25.656357] No EXT_MSG send INIT now
[   25.660951] chunk 0 len 13568 requested , ptr  0x8cee0000
[   25.664506] chunk 1 len 54272 requested , ptr  0x8c1d0000
[   25.669815] chunk 2 len 217088 requested , ptr  0x8c240000
[   25.675182] chunk 3 len 819200 requested , ptr  0x8c300000
[   25.680579] chunk 4 len 395064 requested , ptr  0x8c280000
[   25.686047] chunk 5 len 107520 requested , ptr  0x8bc00000
[   25.691502] chunk 6 len 6144 requested , ptr  0x8c276000
[   25.696983] chunk 7 len 1093860 requested , ptr  0x8be00000
[   25.702438] chunk 8 len 0 requested , ptr  0x87500000
[   25.707820] ol_ath_service_ready_event[4284] WAPI MBSSID 2
[   25.713088] smart_log_init: Smart logging Enabled buf=cbf10000 (size=65536)
[   25.750719] Version = 16777216 3  status = 0
[   25.750785] ol_ath_connect_htc() WMI is ready
[   25.754097] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 0
[   25.754109] target uses HTT version 2.2; host uses 2.2
[   25.773246] ol_ath_attach() connect HTC.
[   25.773266] bypasswmi : 0
[   25.777250] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
[   25.779871] ol_regdmn_init_channels: !avail mode 0x680c (0x2) flags 0x2150
[   25.791488] ol_regdmn_init_channels: !avail mode 0x680c (0x1) flags 0x140
[   25.798375] ol_regdmn_init_channels: !avail mode 0x680c (0x20) flags 0xd0
[   25.805190] ol_regdmn_init_channels: !avail mode 0x680c (0x40) flags 0x150
[   25.812007] ol_regdmn_init_channels: !avail mode 0x680c (0x1000) flags 0x10100
[   25.818745] ol_regdmn_init_channels: !avail mode 0x680c (0x8000) flags 0x20100
[   25.825947] ol_regdmn_init_channels: !avail mode 0x680c (0x10000) flags 0x40100
[   25.833141] ol_regdmn_init_channels: !avail mode 0x680c (0x20000) flags 0x100100
[   25.840356] ol_regdmn_init_channels: !avail mode 0x680c (0x40000) flags 0x200100
[   25.847995] ol_regdmn_init_channels: !avail mode 0x680c (0x80000) flags 0x400100
[   25.855363] ol_regdmn_init_channels: !avail mode 0x680c (0x100000) flags 0x800100
[   25.862752] ol_regdmn_init_channels: !avail mode 0x680c (0x200000) flags 0x4000100
[   25.870132] ol_regdmn_init_channels: !avail mode 0x680c (0x400000) flags 0x8000100
[   25.877841] OL Resmgr Init-ed
[   25.885292] ieee80211_cbs_init CBS Inited
[   25.891124] ieee80211_bsteering_attach: Band steering initialized
[   25.892016] acfg_attach: 2979: Netlink socket created:ced6dc00
[   25.898291] SPECTRAL : get_capability not registered
[   25.903968] HAL_CAP_PHYDIAG : Capable
[   25.909102] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 242)
[   25.912654] SPECTRAL : get_capability not registered
[   25.920818] HAL_CAP_RADAR   : Capable
[   25.925766] SPECTRAL : Need to fix the capablity check for SPECTRAL
[   25.925766]  (spectral_attach : 247)
[   25.929322] SPECTRAL : get_capability not registered
[   25.939221] HAL_CAP_SPECTRAL_SCAN : Capable
[   25.944159] SPECTRAL : get_tsf64 not registered
[   25.948088] spectral_init_netlink 85 NULL SKB
[   25.952587] Green-AP : Green-AP : Attached
[   25.952587]
[   25.957106] Green-AP : Attached
[   25.962474] rate power table override is only supported for AR98XX
[   25.965672] ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna.
[   25.971909] ol_if_dfs_attach: called; ptr=cc2e998c, radar_info=cd52bbb0
[   25.979072] dfs_attach: event log enabled by default
[   25.986529] >>>> CB Set 00000000
[   25.991072] ipq4019_wifi_led_init
[   25.994048] ipq4019_wifi_led_init: init Wifi LED gpio (wifi-led-gpios), turn LED OFF
[   25.997236] ol_ath_attach() UMAC attach .
[   26.005011]
[   26.005011]  BURSTING enabled by default
[   26.008996] ol_ath_attach: Set global_ic[1] ..ptr:bf84d2d8
[   26.014425] ath_lowi_if_netlink_init LOWI Netlink successfully created
[   26.019864] osif_wrap_attach:444 osif wrap attached
[   26.026320] osif_wrap_devt_init:405 osif wrap dev table init done
[   26.031058]  Wrap Attached: Wrap_com =ced66c00 ic->ic_wrap_com=ced66c00 &wrap_com->wc_devt=ced66c00
[   26.037322] __ol_ath_attach: needed_headroom reservation 60
[   26.049000] ol_ath_thermal_mitigation_attach: --
[   26.051829] ol_ath_ahb_probe num_radios=0, wifi_radios[0].sc = cc840500 wifi_radio_type = 2
[   26.056736] ath_sysfs_diag_init: diag_fsattr
[   26.065210]  *********** IPQ4019  *************Wifi1 CPU frequency 250000000
[   26.093705] hif_target_sync_ahb: Got FW signal, retries = 1hif_ahb_enable_bus: X - hif_type = 0xd, target_type = 0xbhif_config_ce: ce_init donehif_config_ce: X, ret = 0hif_set_hia: Ehif_set_hia_extnd: E
[   26.111910] chip_id 0xb chip_revision 0x0
[   26.112792]
[   26.112792]  CLOCK PLL skipped
[   26.116807] hif_set_hia_extnd: setting the target pll frac ffffffff intval ffffffff
[   26.121131] hif_set_hia_extnd: no frac provided, skipping pre-configuring PLL
[   26.129872] hif_pci_bus_configure: hif_set_hia donehif_configure_irq: Ehif_enable: X OKhif_napi_create: NAPI structures initializedhif_napi_create: NAPI id 6 created for pipe 5qca_napi_create: napi instance 32 created on pipe 4
[   26.151684] hif_napi_event: received evnt: CONF cmd; v = 1 (state=0x1)hif_napi_event: setting configuration to ON
__ol_ath_attach() Allocated scn cbc40500
[   26.166230] nss is not enabled on this platform
[   26.169914] nss register id -1 offload mode enabled = 0 nss config 0 Target Type b
[   26.174433] __ol_ath_attach: dev name wifi1
[   26.182079] ol_ath_attach interface_id 1
[   26.186508] ol_target_init() BMI inited.
[   26.190500] ol_target_init() BMI Get Target Info.
[   26.194304] Chip id: 0xb, chip version: 0x1000000
[   26.198926]
[   26.198926]  CE WAR Disabled
[   26.203725] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
[   26.208129] ol_target_init() configure Target .
[   26.213398]
[   26.213398]  Target Version is 1000000
[   26.217670]
[   26.217670]  Flash Download Address  c0000
[   26.222866] ol_transfer_bin_file: flash data file defined
[   26.228777] ol_transfer_bin_file[3819] Get Caldata for wifi1.
[   26.234115] qdf_fs_read[66], Open File /tmp/wifi1.caldata SUCCESS!!file system magic:16914836super blocksize:4096inode 3107file size:12064qc98xx_verify_checksum: flash checksum passed: 0x8db9
[   26.251938] ol_transfer_bin_file 3879: Download Flash data len 12064
[   26.256989] Board extended Data download address: 0x0
[   26.282776]
[   26.282776]  Board data initialized
[   26.282958] ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000
[   26.286838]
[   26.286838]  Selecting  OTP binary for CHIP Version -1079300376
[   26.294363] ol_transfer_bin_file 3701: downloading file 0, Download data len 4676
[   26.318111]
[   26.318111]  First OTP send param 8000
[   26.322802] ol_ath_download_firmware :First OTP download and Execute is good address:0x6400 return param 4660
[   26.322834] ol_ath_download_firmware:##Board Id 25 , CHIP Id 0
[   26.332326] ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000
[   26.337973]
[   26.337973]  wifi1: Selecting board data file name boardData_1_0_IPQ4019_YA131_wifi1.bin
[   26.344814] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=IPQ4019/hw.1/boardData_1_0_IPQ4019_YA131_wifi1.bin
[   26.354862] ol_transfer_bin_file 3701: downloading file 3, Download data len 12064
[   26.362633] [wifi0] FWLOG: [32994] WAL_DBGID_RST_STATS ( 0x1, 0x1, 0x96c, 0x0 )
[   26.362652] [wifi0] FWLOG: [33034] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
[   26.362670] [wifi0] FWLOG: [33034] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
[   26.362688] [wifi0] FWLOG: [33034] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
[   26.362706] [wifi0] FWLOG: [33034] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
[   26.362724] [wifi0] FWLOG: [33168] WAL_DBGID_PDEV_INFO_PRINT ( 0x16, 0xa10, 0x810, 0x0, 0x12 )
[   26.362742] [wifi0] FWLOG: [33168] WAL_DBGID_PDEV_INFO_PRINT ( 0x16, 0x0, 0x12, 0x10, 0x12 )
[   26.425194] Board extended Data download address: 0x0
[   26.453270] ol_ath_download_firmware: Using 0x1234 for the remainder of init
[   26.453299]
[   26.453299]  Selecting  OTP binary for CHIP Version -1079300376
[   26.459550] ol_transfer_bin_file 3701: downloading file 0, Download data len 4676
[   26.483120]
[   26.483120]  [Flash] : Ignore Module param
[   26.483150]
[   26.483150]  Second otp download Param 10000
[   26.498039] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
[   26.498069]
[   26.498069]  Mission mode: Firmware CHIP Version -1079300376
[   26.506033] ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144
[   26.512878] ol_swap_wlan_memory_expansion: length:201359 size_left:201379 dma_size_left:262144 fw_temp:d2742004 fw_entry_size:201383
[   26.519915] ol_swap_wlan_memory_expansion: dma_virt_addr :d2701000 fw_temp: d2742008 length: 201359
[   26.532252] Swap: bytes_left to copy: fw:16; dma_page:60785
[   26.540734] ol_swap_wlan_memory_expansion: length:0 size_left:12 dma_size_left:60785 fw_temp:d277329b fw_entry_size:201383
[   26.546283] Swap: wrong length read:0
[   26.557379] ol_swap_wlan_memory_expansion: Swap total_bytes copied: 201359 Target address 417d70
[   26.561223] scn=cbc40500  target_write_addr=417d70 seg_info=cf174310
[   26.569977] ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2
[   26.576396] bin_filename=IPQ4019/hw.1/athwlan.bin swap_filename=/lib/firmware/IPQ4019/hw.1/athwlan.codeswap.bin
[   26.585278] ol_transfer_bin_file: Downloading firmware file: IPQ4019/hw.1/athwlan.bin
[   26.596382] ol_transfer_bin_file 3701: downloading file 1, Download data len 384380
WLAN 8 interfaces not ready, failed
[   27.424941] Not a bridge device, or device not found: br-lan
[   27.877098] ol_target_init() Download FW done.
[   27.877161]
[   27.877161] ol_ath_copy_tgt_iram() iram read paddr: 0x980000 host paddr 0x87700000 Radio id 1
[   28.045885] ol_ath_attach() WMI attached. wmi_handle cbcd8000
[   28.045919] wmi_unified_register_event_handler: Event id 62 is unavailable
[   28.050625] +htc_create ..  HIF :cbf48000-htc_create: (0xced72800)
[   28.061203] htc_wmi_init() HT Create . ced72800
[   28.063788] htc_wmi_init 8429 host_enable 0 nss_nwifi_offload 0
[   28.068087] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
[   28.073970]  OL_ACBKMinfree : 0
[   28.083347]  OL_ACBEMinfree : 0
[   28.086468]  OL_ACVIMinfree : 0
[   28.089584]  OL_ACVOMinfree : 0
[   28.092713] hif_enable_fastpath, Enabling fastpath mode
[   28.095847] +HWT
[   28.101279] hif_completion_thread_startup: pipe_num:0 pipe_info:0xcbf4cb78hif_completion_thread_startup: pipe_num:3 pipe_info:0xcbf4cc50hif_completion_thread_startup: pipe_num:4 pipe_info:0xcbf4cc98
[   28.119626] -HWT
[   28.120740] Startup Mode-0 set
[   28.122569] pdev attach 00000000 -1
[   28.125442]
[   28.125442] <=== cfg max peer id 1056 ====>
[   28.129995] htt_peer_map_timer_init Enter pdev cb420000 hrtimer cb424948
[   28.134837]
[   28.134837]  htt_alloc_peer_map_mem : Alloc Success : host q vaddr cb42a000 paddr 8b42a000
[   28.141536]
[   28.141536]  htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
[   28.154205] ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from cb0a0000
[   28.161984] Firmware_Build_Number:83
[   28.167401] FW wireless modes: 0x1f9001
[   28.171096] num_rf_chain:0x00000002  ht_cap_info:0x0000085b  vht_cap_info:0x339959b2  vht_supp_mcs:0x0000fffa
[   28.182725] wmi_service_coex_gpio 0, wmi_service_4_wire_coex_support 0, coex_version 0
[   28.184907]
[   28.184907] Sending Ext resource cfg: HOST PLATFORM as 0
[   28.184907] fw_feature_bitmap as 50 to TGT
[   28.192706] ol_ath_service_ready_event: tt_support: 1
[   28.203664] ol_ath_service_ready_event: periodic_chan_stats: 1
[   28.208608] ol_ath_service_ready_event: sw_cal_support_check_flag: 1
[   28.214331] Peer Caching Enabled ; num_peers = 530, num_active_peers = 52 num_tids = 104, num_vdevs = 17
[   28.220901] EXT NSS Supported
[   28.230326] idx 1 req 2  num_units 1 num_unit_info 12 unit size 256 actual units 53
[   28.233216] ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256,
[   28.241000] idx 2 req 3  num_units 1 num_unit_info 12 unit size 1024 actual units 53
[   28.248434] ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024,
[   28.256187] idx 3 req 4  num_units 1 num_unit_info 12 unit size 4096 actual units 53
[   28.263819] ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096,
[   28.271555] idx 8 req 9  num_units 1 num_unit_info 8 unit size 819200 actual units 1
[   28.279640] ol_ath_alloc_host_mem_chunk req_id 9 idx 3 num_units 1 unit_len 819200,
[   28.286920] idx 0 req 1  num_units 0 num_unit_info 2 unit size 744 actual units 531
[   28.294680] ol_ath_alloc_host_mem_chunk req_id 1 idx 4 num_units 531 unit_len 744,
[   28.302370] idx 4 req 6  num_units 35 num_unit_info 0 unit size 3072 actual units 35
[   28.309843] ol_ath_alloc_host_mem_chunk req_id 6 idx 5 num_units 35 unit_len 3072,
[   28.317645] idx 5 req 7  num_units 1 num_unit_info 0 unit size 6144 actual units 1
[   28.325112] ol_ath_alloc_host_mem_chunk req_id 7 idx 6 num_units 1 unit_len 6144,
[   28.332662] idx 6 req 5  num_units 0 num_unit_info 2 unit size 2060 actual units 531
[   28.341258] ol_ath_alloc_host_mem_chunk req_id 5 idx 7 num_units 531 unit_len 2060,
[   28.348114] Support not added yet for Service 91
[   28.355555] Support not added yet for Service 92
[   28.360429] No EXT_MSG send INIT now
[   28.365024] chunk 0 len 13568 requested , ptr  0x8d6e8000
[   28.368592] chunk 1 len 54272 requested , ptr  0x8b100000
[   28.373873] chunk 2 len 217088 requested , ptr  0x8b140000
[   28.379269] chunk 3 len 819200 requested , ptr  0x8b200000
[   28.384636] chunk 4 len 395064 requested , ptr  0x8b180000
[   28.390120] chunk 5 len 107520 requested , ptr  0x8b120000
[   28.395574] chunk 6 len 6144 requested , ptr  0x8b176000
[   28.401056] chunk 7 len 1093860 requested , ptr  0x8ac00000
[   28.406527] chunk 8 len 0 requested , ptr  0x87700000
[   28.411871] ol_ath_service_ready_event[4284] WAPI MBSSID 2
[   28.417188] smart_log_init: Smart logging Enabled buf=cad10000 (size=65536)
[   28.455033] Version = 16777216 3  status = 0
[   28.455096] ol_ath_connect_htc() WMI is ready
[   28.458442] htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 1
[   28.458448] target uses HTT version 2.2; host uses 2.2
[   28.477560] ol_ath_attach() connect HTC.
[   28.477580] bypasswmi : 0
[   28.481550] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
[   28.484183] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
[   28.495840] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
[   28.502994] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
[   28.509688] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
[   28.516547] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
[   28.523393] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
[   28.530693] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
[   28.537727] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
[   28.545462] Add VHT80 channel: 5210
[   28.552734] Add VHT80 channel: 5290
[   28.555946] Add VHT80 channel: 5530
[   28.559409] Add VHT80 channel: 5610
[   28.562879] Add VHT80 channel: 5690
[   28.566360] Add VHT80 channel: 5775
[   28.569851] Skipping VHT80 channel 5825
[   28.573302] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100
[   28.577137] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100
[   28.586162] freq=58
[   28.592832] freq=106
[   28.594995] freq=122
[   28.597213] OL Resmgr Init-ed
[   28.599584] ieee80211_cbs_init CBS Inited
[   28.605332] ieee80211_bsteering_attach: Band steering initialized
[   28.606217] acfg_attach: Offload using existing sock ced6dc00
[   28.612489] SPECTRAL : get_capability not registered
[   28.618190] HAL_CAP_PHYDIAG : Capable
[   28.623215] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 242)
[   28.626786] SPECTRAL : get_capability not registered
[   28.634931] HAL_CAP_RADAR   : Capable
[   28.639889] SPECTRAL : Need to fix the capablity check for SPECTRAL
[   28.639889]  (spectral_attach : 247)
[   28.643447] SPECTRAL : get_capability not registered
[   28.653343] HAL_CAP_SPECTRAL_SCAN : Capable
[   28.658290] SPECTRAL : get_tsf64 not registered
[   28.662191] spectral_init_netlink 85 NULL SKB
[   28.666727] Green-AP : Green-AP : Attached
[   28.666727]
[   28.671219] Green-AP : Attached
[   28.676604] rate power table override is only supported for AR98XX
[   28.679779] ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna.
[   28.686045] ol_if_dfs_attach: called; ptr=cb2c998c, radar_info=cd52bbb0
[   28.693185] dfs_attach: event log enabled by default
[   28.700643] >>>> CB Set 00000000
[   28.705673] ipq4019_wifi_led_init
[   28.708149] ipq4019_wifi_led_init: init Wifi LED gpio (wifi-led-gpios), turn LED OFF
[   28.711331] ol_ath_attach() UMAC attach .
[   28.719146]
[   28.719146]  BURSTING enabled by default
[   28.723113] ol_ath_attach: Set global_ic[2] ..ptr:bf84d2d8
[   28.728538] ath_lowi_if_netlink_init Incremented LOWI netlink ref count: 2
[   28.733904] osif_wrap_attach:444 osif wrap attached
[   28.740782] osif_wrap_devt_init:405 osif wrap dev table init done
[   28.745436] Switching to Tx Mode-1 Threshold 280
[   28.751785]  Wrap Attached: Wrap_com =cedad600 ic->ic_wrap_com=cedad600 &wrap_com->wc_devt=cedad600
[   28.756480] __ol_ath_attach: needed_headroom reservation 60
[   28.768024] ol_ath_thermal_mitigation_attach: --
[   28.770906] ol_ath_ahb_probe num_radios=1, wifi_radios[1].sc = cbc40500 wifi_radio_type = 2
[   28.775804] ath_sysfs_diag_init: diag_fsattr
[   28.784241] ath_ol_pci:  (Atheros/multi-bss)
[   28.801955]  pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16
[   28.801994] +hif_update_pipe_callback pipeid 8
[   28.808577] -hif_update_pipe_callback
[   28.812550]  pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16
[   28.816274] +hif_update_pipe_callback pipeid 8
[   28.823346] -hif_update_pipe_callback
[   28.838459] __sa_init_module
No Direct-Attach chipsets found.
[   28.923524] Removing athdebug proc file
[   28.923580] ath_dev: driver unloaded
[   28.973612] ath_tx99: driver unloaded
[   29.013493] ath_rate_atheros: driver unloaded
[   29.043421] ath_hal: driver unloaded
[   29.073018] [wifi1] FWLOG: [35764] WAL_DBGID_RST_STATS ( 0x1, 0x1, 0x1464, 0x0 )
[   29.078947] [wifi1] FWLOG: [35804] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
[   29.087542] [wifi1] FWLOG: [35804] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
[   29.096223] [wifi1] FWLOG: [35804] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
[   29.104903] [wifi1] FWLOG: [35804] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
[   29.113583] [wifi1] FWLOG: [35943] WAL_DBGID_PDEV_INFO_PRINT ( 0x16, 0xa10, 0x810, 0x10, 0x0 )
[   29.122174] [wifi1] FWLOG: [35943] WAL_DBGID_PDEV_INFO_PRINT ( 0x16, 0x10, 0x0, 0x10, 0x12 )
[   31.449793] Switching to Tx Mode-1 Threshold 280
[   33.656861] ECM init
[   33.656961] ECM database jhash random seed: 0x591b7984
[   33.659971] ECM init complete
[   34.418278] Not a bridge device, or device not found: br-lan
qcawifi disable radio wifi0
qcawifi disable radio wifi1
[   34.758891] netlink: 12 bytes leftover after parsing attributes in process `ip'.
[   34.758935] netlink: 12 bytes leftover after parsing attributes in process `ip'.
qcawifi: enable radio wifi0
[   34.817731] device eth0 entered promiscuous mode
[   34.821854] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   35.123809] isCountryCodeValid: EEPROM regdomain 0x0
[   35.123866] ol_regdmn_init_channels: !avail mode 0x680c (0x2) flags 0x2150
[   35.127943] ol_regdmn_init_channels: !avail mode 0x680c (0x1) flags 0x140
[   35.134579] ol_regdmn_init_channels: !avail mode 0x680c (0x20) flags 0xd0
[   35.141440] ol_regdmn_init_channels: !avail mode 0x680c (0x40) flags 0x150
[   35.148233] ol_regdmn_init_channels: !avail mode 0x680c (0x1000) flags 0x10100
[   35.154943] ol_regdmn_init_channels: !avail mode 0x680c (0x8000) flags 0x20100
[   35.162186] ol_regdmn_init_channels: !avail mode 0x680c (0x10000) flags 0x40100
[   35.169462] ol_regdmn_init_channels: !avail mode 0x680c (0x20000) flags 0x100100
[   35.176615] ol_regdmn_init_channels: !avail mode 0x680c (0x40000) flags 0x200100
[   35.184251] ol_regdmn_init_channels: !avail mode 0x680c (0x80000) flags 0x400100
[   35.191636] ol_regdmn_init_channels: !avail mode 0x680c (0x100000) flags 0x800100
[   35.198986] ol_regdmn_init_channels: !avail mode 0x680c (0x200000) flags 0x4000100
[   35.206353] ol_regdmn_init_channels: !avail mode 0x680c (0x400000) flags 0x8000100
[   35.248518] set TXBF_SND_PERIOD: value 100 wmi_status 0
[   35.266049]  Disconnect_timeout value entered:10
[   35.271124]  reconfiguration_timeout value entered:60
[   35.358332] [wifi0] FWLOG: [42734] WAL_DBGID_PDEV_INFO_PRINT ( 0x37, 0x199, 0x130, 0x0, 0x32 )
[   35.365408] [wifi0] FWLOG: [42769] WAL_DBGID_RST_STATS ( 0x2, 0x2, 0x96c, 0x0 )
[   35.558239] wlan_vap_create : enter. devhandle=0xcc840500, opmode=IEEE80211_M_HOSTAP, flags=0x1
[   35.558344] send_vdev_create_cmd_non_tlv: ID = 0 Type = 1, Subtype = 0 VAP Addr = 70:b3:d5:00:bf:41:
[   35.565982] ieee80211_mbo_vattach:MBO Initialized
[   35.575120] ieee80211_oce_vattach: OCE Initialized
[   35.579996] wlan_vap_create : exit. devhandle=0xcc840500, vap=0xcaea0000, opmode=IEEE80211_M_HOSTAP, flags=0x1.
[   35.584564] __ieee80211_smart_ant_init: Smart Antenna is not supported
[   35.594672] Enabling TX checksum bit for the vap ath0 features 4000
[   35.601232] Enabling SG bit for the vap ath0 features 4000
[   35.607789] Enabling SG bit for the vap ath0 features 4000
[   35.613054] Enabling TSO bit for the vap ath0 features 4000
[   35.618634] Enabling LRO bit for the vap ath0 features 4000
[   35.625896] VAP device ath0 created osifp: (cb926500) os_if: (caea0000)
[   35.641677] siwfreq
[   35.641716] Set freq vap 0 stop send + caea0000
[   35.642894] Set freq vap 0 stop send -caea0000
[   35.675705] Set wait done --caea0000
[   35.748450] [DEBUG] vap-0(ath0):set SIOC80211NWID, 11 characters
[   35.748491]
[   35.748491]  DES SSID SET=GhnWiFiBF3E
[   35.805812] br-lan: port 1(eth0) entered forwarding state
[   35.805944] br-lan: port 1(eth0) entered forwarding state
[   35.810410] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   36.095704]  ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1
[   36.136153]  DEVICE IS DOWN ifname=ath0
[   36.136255]  DEVICE IS DOWN ifname=ath0
[   36.676162] Sending SCAN START cmd
[   36.679017] 8021q: adding VLAN 0 to HW filter on device ath0
[   36.787324] device ath0 entered promiscuous mode
[   36.787440] br-lan: port 2(ath0) entered forwarding state
[   36.791040] br-lan: port 2(ath0) entered forwarding state
[   37.004269] __mc_netlink_receive: Disable bridge snooping!
[   37.357541] [wifi0] FWLOG: [44207] WAL_DBGID_SECURITY_ENCR_EN (  )
[   37.363256] [wifi0] FWLOG: [44207] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 )
[   37.369378] [wifi0] FWLOG: [44232] WAL channel change freq=2412, mode=1 flags=0 rx_ok=1 tx_ok=1
[   37.372870] [wifi0] FWLOG: [44547] WAL channel change freq=2417, mode=1 flags=0 rx_ok=1 tx_ok=1
[   37.381609] [wifi0] FWLOG: [44862] WAL channel change freq=2422, mode=1 flags=0 rx_ok=1 tx_ok=1
qcawifi: enable radio wifi1
[   37.522117] isCountryCodeValid: EEPROM regdomain 0x0
[   37.522174] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
[   37.526274] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
[   37.533221] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
[   37.539932] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
[   37.546819] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
[   37.553604] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
[   37.560924] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
[   37.567979] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
[   37.575689] Add VHT80 channel: 5210
[   37.582938] Add VHT80 channel: 5290
[   37.586191] Add VHT80 channel: 5530
[   37.589618] Add VHT80 channel: 5610
[   37.593112] Skipping VHT80 channel 5660
[   37.596591] Skipping VHT80 channel 5680
[   37.600382] Skipping VHT80 channel 5700
[   37.604206] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100
[   37.608072] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100
[   37.617439] freq=58
[   37.623731] freq=106
[   37.625929] freq=122
[   37.666234] set TXBF_SND_PERIOD: value 100 wmi_status 0
[   37.684999]  Disconnect_timeout value entered:10
[   37.690369]  reconfiguration_timeout value entered:60
[   37.805681] br-lan: port 1(eth0) entered forwarding state
[   37.872427] wlan_vap_create : enter. devhandle=0xcbc40500, opmode=IEEE80211_M_HOSTAP, flags=0x1
[   37.872539] send_vdev_create_cmd_non_tlv: ID = 0 Type = 1, Subtype = 0 VAP Addr = 70:b3:d5:00:bf:42:
[   37.880204] ieee80211_mbo_vattach:MBO Initialized
[   37.889786] ieee80211_oce_vattach: OCE Initialized
[   37.894250] wlan_vap_create : exit. devhandle=0xcbc40500, vap=0xcaf90000, opmode=IEEE80211_M_HOSTAP, flags=0x1.
[   37.898840] __ieee80211_smart_ant_init: Smart Antenna is not supported
[   37.909004] Enabling TX checksum bit for the vap ath1 features 4000
[   37.915353] Enabling SG bit for the vap ath1 features 4000
[   37.922066] Enabling SG bit for the vap ath1 features 4000
[   37.927312] Enabling TSO bit for the vap ath1 features 4000
[   37.933003] Enabling LRO bit for the vap ath1 features 4000
[   37.940791] VAP device ath1 created osifp: (caee1500) os_if: (caf90000)
[   37.967865] siwfreq
[   37.967911] Set freq vap 0 stop send + caf90000
[   37.969076] Set freq vap 0 stop send -caf90000
[   37.995718] Set wait done --caf90000
[   38.069408] [wifi1] FWLOG: [45195] WAL_DBGID_PDEV_INFO_PRINT ( 0x37, 0x199, 0x130, 0x30, 0x0 )
[   38.076553] [wifi1] FWLOG: [45195] WAL_DBGID_PDEV_INFO_PRINT ( 0x37[   38.081886] [DEBUG] vap-0(ath1):set SIOC80211NWID, 13 characters
[   38.081895]
[   38.081895]  DES SSID SET=GhnWiFi5GBF3E

[   38.089370] , 0x30, 0x0, 0x30, 0x0 )
[   38.097822] [wifi1] FWLOG: [45245] WAL_DBGID_RST_STATS ( 0x2, 0x2, 0x1464, 0x0 )
[   38.356982] [wifi0] FWLOG: [45176] WAL channel change freq=2427, mode=1 flags=0 rx_ok=1 tx_ok=1
[   38.359203] [wifi0] FWLOG: [45489] WAL channel change freq=2432, mode=1 flags=0 rx_ok=1 tx_ok=1
[   38.367874] [wifi0] FWLOG: [45804] WAL channel change freq=2437, mode=1 flags=0 rx_ok=1 tx_ok=1
[   38.405788]  ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1
[   38.446181]  DEVICE IS DOWN ifname=ath1
[   38.446287]  DEVICE IS DOWN ifname=ath1
[   38.646627] Sending SCAN START cmd
[   38.647158] 8021q: adding VLAN 0 to HW filter on device ath1
[   38.785694] br-lan: port 2(ath0) entered forwarding state
[   38.796801] device ath1 entered promiscuous mode
[   38.796982] br-lan: port 3(ath1) entered forwarding state
[   38.800615] br-lan: port 3(ath1) entered forwarding state
[   39.068954] [wifi1] FWLOG: [46225] WAL_DBGID_SECURITY_ENCR_EN (  )
[   39.073629] [wifi1] FWLOG: [46225] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 )
[   39.080625] [wifi1] FWLOG: [46252] WAL channel change freq=5180, mode=0 flags=0 rx_ok=1 tx_ok=1
[   39.084290] [wifi1] FWLOG: [46566] WAL channel change freq=5200, mode=0 flags=0 rx_ok=1 tx_ok=1
[   39.356476] [wifi0] FWLOG: [46118] WAL channel change freq=2442, mode=1 flags=0 rx_ok=1 tx_ok=1
[   39.358784] [wifi0] FWLOG: [46432] WAL channel change freq=2447, mode=1 flags=0 rx_ok=1 tx_ok=1
[   39.367441] [wifi0] FWLOG: [46746] WAL channel change freq=2452, mode=1 flags=0 rx_ok=1 tx_ok=1
[   40.068407] [wifi1] FWLOG: [46881] WAL channel change freq=5220, mode=0 flags=0 rx_ok=1 tx_ok=1
[   40.070624] [wifi1] FWLOG: [47196] WAL channel change freq=5240, mode=0 flags=0 rx_ok=1 tx_ok=1
[   40.079305] [wifi1] FWLOG: [47510] WAL channel change freq=5260, mode=0 flags=0 rx_ok=1 tx_ok=1
[   40.095033] __mc_netlink_receive: Disable bridge snooping!
[   40.355910] [wifi0] FWLOG: [47061] WAL channel change freq=2457, mode=1 flags=0 rx_ok=1 tx_ok=1
[   40.358229] [wifi0] FWLOG: [47375] WAL channel change freq=2462, mode=1 flags=0 rx_ok=1 tx_ok=1
[   40.366852] [wifi0] FWLOG: [47689] WAL channel change freq=2467, mode=1 flags=0 rx_ok=1 tx_ok=1
[   40.662948] send_vdev_down_cmd_non_tlv for vap 0
[   40.663240] ieee80211_derive_chan : Overriding HT40 channel with HT20 channel
[   40.666680] OL vap_start +

2

Odp: Ethernet over Coax EoC 2-31 G.hn Coax Peer to Peer WiFi openwrt?

[   40.673670] VDEV START
[   40.676302] OL vap_start -
[   40.678657] ol_ath_vap_set_param: Now supported MGMT RATE is 1000(kbps) and rate code: 0x43
[   40.795629] br-lan: port 3(ath1) entered forwarding state
[   40.888050] ol_vdev_start_resp_ev for vap 0 (cccb0000)
[   40.888091] send_wmm_update_cmd_non_tlv:
[   40.892273] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1
[   40.896222] send_vdev_up_cmd_non_tlv for vap 0
[   40.903215] Beacon mode set to staggered. Cannot enable FD
[   40.907471] __ieee80211_smart_ant_init: Smart Antenna is not supported
[   40.912945] ol_ath_vap_set_param: Now supported MGMT RATE is 1000(kbps) and rate code: 0x43
[   41.067837] [wifi1] FWLOG: [47823] WAL channel change freq=5280, mode=0 flags=0 rx_ok=1 tx_ok=1
[   41.070050] [wifi1] FWLOG: [48138] WAL channel change freq=5300, mode=0 flags=0 rx_ok=1 tx_ok=1
[   41.095655] [wifi1] FWLOG: [48453] WAL channel change freq=5320, mode=0 flags=0 rx_ok=1 tx_ok=1
[   41.355711] [wifi0] FWLOG: [48004] WAL channel change freq=2472, mode=1 flags=0 rx_ok=1 tx_ok=1
[   41.357919] [wifi0] FWLOG: [48317] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
[   41.385740] [wifi0] FWLOG: [48317] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
[   41.391125] [wifi0] FWLOG: [48330] vap-0 VDEV_MGR_VDEV_START ( 0x985, 0x2, 0x0, 0x0 )
[   41.398938] [wifi0] FWLOG: [48330] WAL channel change freq=2437, mode=5 flags=0 rx_ok=1 tx_ok=1
[   41.402592] [wifi0] FWLOG: [48330] WAL_DBGID_RST_STATS ( 0x2, 0x80, 0x985, 0x1 )
[   41.415001] [wifi0] FWLOG: [48547] VDEV_MGR_VDEV_START_RESP ( 0x0 )
[   41.421249] [wifi0] FWLOG: [48567] VDEV_MGR_HP_START_TIME ( 0x0, 0x985, 0xe8d001 )
[   41.428713] [wifi0] FWLOG: [48567] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x1 )
[   41.435311] [wifi0] FWLOG: [48567] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
[   41.441868] [wifi0] FWLOG: [48567] VDEV_MGR_AP_TBTT_CONFIG ( 0x0, 0x985, 0x0, 0x0 )
[   42.067318] [wifi1] FWLOG: [48766] WAL channel change freq=5500, mode=0 flags=0 rx_ok=1 tx_ok=1
[   42.069536] [wifi1] FWLOG: [49080] WAL channel change freq=5520, mode=0 flags=0 rx_ok=1 tx_ok=1
[   42.078208] [wifi1] FWLOG: [49395] WAL channel change freq=5540, mode=0 flags=0 rx_ok=1 tx_ok=1
[   42.086915] [wifi1] FWLOG: [49709] WAL channel change freq=5560, mode=0 flags=0 rx_ok=1 tx_ok=1
[   43.066807] [wifi1] FWLOG: [50024] WAL channel change freq=5580, mode=0 flags=0 rx_ok=1 tx_ok=1
[   43.069022] [wifi1] FWLOG: [50338] WAL channel change freq=5600, mode=0 flags=0 rx_ok=1 tx_ok=1
[   43.077701] [wifi1] FWLOG: [50651] WAL channel change freq=5620, mode=0 flags=0 rx_ok=1 tx_ok=1
[   44.066292] [wifi1] FWLOG: [50966] WAL channel change freq=5640, mode=0 flags=0 rx_ok=1 tx_ok=1
[   44.068498] [wifi1] FWLOG: [51281] WAL channel change freq=5660, mode=0 flags=0 rx_ok=1 tx_ok=1
[   44.077189] [wifi1] FWLOG: [51595] WAL channel change freq=5680, mode=0 flags=0 rx_ok=1 tx_ok=1
[   44.475367] send_vdev_down_cmd_non_tlv for vap 0
[   44.475746] OL vap_start +
[   44.479087] VDEV START
[   44.481596] OL vap_start -
[   44.483958] ol_ath_vap_set_param: Now supported MGMT RATE is 6000(kbps) and rate code: 0x3
[   44.669234] ol_vdev_start_resp_ev for vap 0 (cbcd8000)
[   44.669289] send_wmm_update_cmd_non_tlv:
[   44.673330] ol_if_dfs_configure: ETSI domain
[   44.677821] ol_ath_vap_set_param: Now supported MGMT RATE is 6000(kbps) and rate code: 0x3
[   44.681854] dfs_deliver_event: dfs CAC_START event delivered on chan 116.
[   44.689776] dfs_deliver_event: dfs CAC_START event delivered on chan 120.
[   44.696694] dfs_deliver_event: dfs CAC_START event delivered on chan 124.
[   44.703318] dfs_deliver_event: dfs CAC_START event delivered on chan 128.
[   45.065790] [wifi1] FWLOG: [51909] WAL channel change freq=5700, mode=0 flags=0 rx_ok=1 tx_ok=1
[   45.068003] [wifi1] FWLOG: [52223] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
[   45.079533] [wifi1] FWLOG: [52223] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
[   45.086043] [wifi1] FWLOG: [52229] vap-0 VDEV_MGR_VDEV_START ( 0x15e0, 0x2, 0x0, 0x1 )
[   45.093942] [wifi1] FWLOG: [52229] WAL channel change freq=5600, mode=10 flags=0 rx_ok=1 tx_ok=1
[   45.097610] [wifi1] FWLOG: [52229] WAL_DBGID_RST_STATS ( 0x2, 0x80, 0x15e0, 0x1 )
[   45.110177] [wifi1] FWLOG: [52421] VDEV_MGR_VDEV_START_RESP ( 0x0 )
WLAN 6 interfaces not ready, failed
[   50.503823] __mc_netlink_receive: Enable bridge snooping!


---------------------------------------------------------------


BusyBox v1.25.1 (2019-11-22 11:56:53 CST) built-in shell (ash)

     MM           NM                    MMMMMMM          M       M
   $MMMMM        MMMMM                MMMMMMMMMMM      MMM     MMM
  MMMMMMMM     MM MMMMM.              MMMMM:MMMMMM:   MMMM   MMMMM
MMMM= MMMMMM  MMM   MMMM       MMMMM   MMMM  MMMMMM   MMMM  MMMMM'
MMMM=  MMMMM MMMM    MM       MMMMM    MMMM    MMMM   MMMMNMMMMM
MMMM=   MMMM  MMMMM          MMMMM     MMMM    MMMM   MMMMMMMM
MMMM=   MMMM   MMMMMM       MMMMM      MMMM    MMMM   MMMMMMMMM
MMMM=   MMMM     MMMMM,    NMMMMMMMM   MMMM    MMMM   MMMMMMMMMMM
MMMM=   MMMM      MMMMMM   MMMMMMMM    MMMM    MMMM   MMMM  MMMMMM
MMMM=   MMMM   MM    MMMM    MMMM      MMMM    MMMM   MMMM    MMMM
MMMM$ ,MMMMM  MMMMM  MMMM    MMM       MMMM   MMMMM   MMMM    MMMM
  MMMMMMM:      MMMMMMM     M         MMMMMMMMMMMM  MMMMMMM MMMMMMM
    MMMMMM       MMMMN     M           MMMMMMMMM      MMMM    MMMM
     MMMM          M                    MMMMMMM        M       M
       M
---------------------------------------------------------------
   For those about to rock... (Chaos Calmer, f53cef1+r49254)

3

Odp: Ethernet over Coax EoC 2-31 G.hn Coax Peer to Peer WiFi openwrt?

Zwykły qualcomm na standardowym qsdk. Masz dwa lany, masz wifi, możesz się pokusić o przeportowanie openwrt, choć trzeba sobie zadać pytanie czy jest sens.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

4

Odp: Ethernet over Coax EoC 2-31 G.hn Coax Peer to Peer WiFi openwrt?

Sam tego nie zrobię. Jakby się udało wymieniłbym rodzicom wndr4300 który robi za klienta wifi. Ten ma radio ac więc lepiej by to działało. W zasadzie tylko do tego lub zwykłego ap by się nadawało. Jak masz ochotę mogę Ci to podrzucić