E372 jest obsługiwany. A softu nie ma bo mi serwer leży. Jak chcesz plik do zgłoś się ma email to Ci po południu wyślę go.

Wgrałem build z 20 sierpnia. Zmieniłem USB z 0 na 4. E372 nie wstaje po włączenia rutera. Pomaga tylko ifwan up albo potwierdzenie zmian w konfiguracji poprzez GUI. Jak zrobić aby wstawał po włączeniu rutera ?

Dałem mu 10 minut czasu. Co jeszcze mogę zrobić ?

Wstał po kilku on/off ....

Jan  1 01:00:42 Gargoyle user.info kernel: usbcore: registered new interface driver usbserial_generic
Jan  1 01:00:42 Gargoyle user.info kernel: usbserial: USB Serial Driver core
Jan  1 01:00:42 Gargoyle user.info kernel: USB Serial support registered for GSM modem (1-port)
Jan  1 01:00:42 Gargoyle user.info kernel: usbcore: registered new interface driver option
Jan  1 01:00:42 Gargoyle user.info kernel: option: v0.7.2:USB Driver for GSM modems
Jan  1 01:00:43 Gargoyle user.info kernel: USB Serial support registered for Sierra USB modem
Jan  1 01:00:43 Gargoyle user.info kernel: usbcore: registered new interface driver sierra
Jan  1 01:00:43 Gargoyle user.info kernel: sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems
Jan  1 01:00:43 Gargoyle user.info sysinit: WARNING: /lib/functions/fsck not found
Jan  1 01:00:43 Gargoyle user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_2.6.32.27_ehci_hcd Product=Atheros_AR91xx_built-in_EHCI_controller Serial=ar71xx-ehci
Jan  1 01:00:43 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Manufacturer=Huawei_Technologies Product=HUAWEI_Mobile Serial=?
Jan  1 01:00:43 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/12d1:1446 for mode switching
Jan  1 01:00:44 Gargoyle user.notice usb-modeswitch: 1-1:1.1: Manufacturer=Huawei_Technologies Product=HUAWEI_Mobile Serial=?
Jan  1 01:00:44 Gargoyle user.notice usb-modeswitch: 1-1:1.1: Selecting /etc/usb_modeswitch.d/12d1:1446 for mode switching
Jan  1 01:00:48 Gargoyle user.info kernel: cfg80211: Calling CRDA for country: PL
Jan  1 01:00:48 Gargoyle user.info kernel: cfg80211: Regulatory domain changed to country: PL
Jan  1 01:00:48 Gargoyle user.info kernel: cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan  1 01:00:48 Gargoyle user.info kernel: cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan  1 01:00:48 Gargoyle user.info kernel: cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan  1 01:00:48 Gargoyle user.info kernel: cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan  1 01:00:48 Gargoyle user.info kernel: cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Jan  1 01:00:49 Gargoyle user.info kernel: device wlan0 entered promiscuous mode
Jan  1 01:00:49 Gargoyle user.info kernel: br-lan: port 2(wlan0) entering forwarding state
Jan  1 01:00:52 Gargoyle user.info kernel: device wlan0 left promiscuous mode
Jan  1 01:00:52 Gargoyle user.info kernel: br-lan: port 2(wlan0) entering disabled state
Jan  1 01:00:52 Gargoyle user.info kernel: device wlan0 entered promiscuous mode
Jan  1 01:00:52 Gargoyle user.info kernel: br-lan: port 2(wlan0) entering forwarding state
Aug 29 18:28:40 Gargoyle user.info sysinit: Error 1 looking up hostname 0.pl.pool.ntp.org
Aug 29 18:28:40 Gargoyle user.info sysinit: Error 1 looking up hostname 1.pl.pool.ntp.org
Aug 29 18:28:40 Gargoyle user.info sysinit: Error 1 looking up hostname 2.pl.pool.ntp.org
Aug 29 18:28:40 Gargoyle user.info sysinit: Loading defaults
Aug 29 18:28:41 Gargoyle user.info sysinit: Loading synflood protection
Aug 29 18:28:41 Gargoyle user.info sysinit: Adding custom chains
Aug 29 18:28:41 Gargoyle user.info sysinit: Loading zones
Aug 29 18:28:42 Gargoyle user.info sysinit: Loading forwardings
Aug 29 18:28:42 Gargoyle user.info sysinit: Loading redirects
Aug 29 18:28:42 Gargoyle user.info sysinit: Loading rules
Aug 29 18:28:43 Gargoyle user.info sysinit: Loading includes
Aug 29 18:28:43 Gargoyle user.info sysinit: Optimizing conntrack
Aug 29 18:28:43 Gargoyle user.info sysinit: Loading interfaces
Aug 29 18:28:43 Gargoyle user.info firewall: adding lan (br-lan) to zone lan
Aug 29 18:28:44 Gargoyle cron.err crond[1358]: crond (busybox 1.15.3) started, log level 5
Aug 29 18:28:45 Gargoyle authpriv.info dropbear[1372]: Running in background
Aug 29 18:28:45 Gargoyle daemon.crit httpd_gargoyle[1391]: socket :: - Address family not supported by protocol
Aug 29 18:28:45 Gargoyle daemon.err httpd_gargoyle[1391]: unknown sockaddr family on listen socket - 0
Aug 29 18:28:45 Gargoyle daemon.warn httpd_gargoyle[1397]: started as root without requesting chroot(), warning only
Aug 29 18:28:45 Gargoyle daemon.notice httpd_gargoyle[1397]: httpd_gargoyle/1.0 14mar2008 starting on Gargoyle, port 80
Aug 29 18:28:45 Gargoyle user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Aug 29 18:28:45 Gargoyle user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Aug 29 18:28:49 Gargoyle daemon.info dnsmasq[1421]: started, version 2.55 cachesize 150
Aug 29 18:28:49 Gargoyle daemon.info dnsmasq[1421]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Aug 29 18:28:49 Gargoyle daemon.info dnsmasq-dhcp[1421]: DHCP, IP range 192.168.1.100 -- 192.168.1.250, lease time 12h
Aug 29 18:28:49 Gargoyle daemon.info dnsmasq[1421]: using local addresses only for domain lan
Aug 29 18:28:49 Gargoyle daemon.info dnsmasq[1421]: reading /tmp/resolv.conf.auto
Aug 29 18:28:49 Gargoyle daemon.warn dnsmasq[1421]: ignoring nameserver 192.168.1.1 - local interface
Aug 29 18:28:49 Gargoyle daemon.info dnsmasq[1421]: using local addresses only for domain lan
Aug 29 18:28:49 Gargoyle daemon.info dnsmasq[1421]: read /etc/hosts - 2 addresses
Aug 29 18:28:49 Gargoyle daemon.info dnsmasq-dhcp[1421]: read /etc/ethers - 0 addresses
Aug 29 18:28:49 Gargoyle user.info sysinit: ERROR: No valid dynamic DNS service configurations defined
Aug 29 18:28:49 Gargoyle user.info sysinit: (Did you specify correct configuration file path?)
Aug 29 18:28:49 Gargoyle user.warn kernel: usb 1-1: usbfs: process 1442 (usb_modeswitch) did not claim interface 0 before use
Aug 29 18:28:49 Gargoyle user.info sysinit: Looking for target devices ...
Aug 29 18:28:49 Gargoyle user.info sysinit:  No devices in target mode or class found
Aug 29 18:28:49 Gargoyle user.info sysinit: Looking for default devices ...
Aug 29 18:28:49 Gargoyle user.info sysinit:  Found devices in default mode, class or configuration (1)
Aug 29 18:28:49 Gargoyle user.info sysinit: Accessing device 002 on bus 001 ...
Aug 29 18:28:49 Gargoyle user.info sysinit: Getting the current device configuration ...
Aug 29 18:28:49 Gargoyle user.info sysinit:  OK, got current device configuration (1)
Aug 29 18:28:49 Gargoyle user.info sysinit: Using endpoints 0x01 (out) and 0x81 (in)
Aug 29 18:28:49 Gargoyle user.info sysinit: Inquiring device details; driver will be detached ...
Aug 29 18:28:49 Gargoyle user.info sysinit: Looking for active driver ...
Aug 29 18:28:49 Gargoyle user.info sysinit:  OK, driver found ("usb-storage")
Aug 29 18:28:49 Gargoyle user.info sysinit: Trying to send message 1 to endpoint 0x01 ...
Aug 29 18:28:49 Gargoyle user.info kernel: usb 1-1: USB disconnect, address 2
Aug 29 18:28:54 Gargoyle user.info kernel: usb 1-1: new high speed USB device using ar71xx-ehci and address 3
Aug 29 18:28:55 Gargoyle user.info kernel: usb 1-1: configuration #1 chosen from 1 choice
Aug 29 18:28:55 Gargoyle user.info kernel: option 1-1:1.0: GSM modem (1-port) converter detected
Aug 29 18:28:55 Gargoyle user.info kernel: usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
Aug 29 18:28:55 Gargoyle user.info kernel: option 1-1:1.1: GSM modem (1-port) converter detected
Aug 29 18:28:55 Gargoyle user.info kernel: usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
Aug 29 18:28:55 Gargoyle user.info kernel: option 1-1:1.2: GSM modem (1-port) converter detected
Aug 29 18:28:55 Gargoyle user.info kernel: usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
Aug 29 18:28:55 Gargoyle user.info kernel: option 1-1:1.3: GSM modem (1-port) converter detected
Aug 29 18:28:55 Gargoyle user.info kernel: usb 1-1: GSM modem (1-port) converter now attached to ttyUSB3
Aug 29 18:28:55 Gargoyle user.info kernel: option 1-1:1.4: GSM modem (1-port) converter detected
Aug 29 18:28:55 Gargoyle user.info kernel: usb 1-1: GSM modem (1-port) converter now attached to ttyUSB4
Aug 29 18:28:55 Gargoyle user.info kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Aug 29 18:28:55 Gargoyle user.debug kernel: usb-storage: device found at 3
Aug 29 18:28:55 Gargoyle user.debug kernel: usb-storage: waiting for device to settle before scanning
Aug 29 18:28:55 Gargoyle user.info kernel: scsi3 : SCSI emulation for USB Mass Storage devices
Aug 29 18:28:55 Gargoyle user.debug kernel: usb-storage: device found at 3
Aug 29 18:28:55 Gargoyle user.debug kernel: usb-storage: waiting for device to settle before scanning
Aug 29 18:28:55 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Manufacturer=Huawei_Technologies Product=HUAWEI_Mobile Serial=?
Aug 29 18:28:55 Gargoyle user.notice usb-modeswitch: 1-1:1.1: Manufacturer=Huawei_Technologies Product=HUAWEI_Mobile Serial=?
Aug 29 18:28:56 Gargoyle user.notice usb-modeswitch: 1-1:1.2: Manufacturer=Huawei_Technologies Product=HUAWEI_Mobile Serial=?
Aug 29 18:28:56 Gargoyle user.info sysinit:  OK, message successfully sent
Aug 29 18:28:56 Gargoyle user.info sysinit: Resetting response endpoint 0x81
Aug 29 18:28:56 Gargoyle user.info sysinit: Resetting message endpoint 0x01
Aug 29 18:28:56 Gargoyle user.info sysinit:  Device is gone, skipping any further commands
Aug 29 18:28:56 Gargoyle user.info sysinit: Checking for mode switch (max. 20 times, once per second) ...
Aug 29 18:28:56 Gargoyle user.info sysinit:  Searching for target devices ...
Aug 29 18:28:56 Gargoyle user.info sysinit:  Searching for target devices ...
Aug 29 18:28:56 Gargoyle user.info sysinit:  Searching for target devices ...
Aug 29 18:28:56 Gargoyle user.info sysinit:  Searching for target devices ...
Aug 29 18:28:56 Gargoyle user.info sysinit:  Searching for target devices ...
Aug 29 18:28:56 Gargoyle user.info sysinit:  Searching for target devices ...
Aug 29 18:28:56 Gargoyle user.info sysinit: Found target device, now opening
Aug 29 18:28:56 Gargoyle user.info sysinit:  Found correct target device
Aug 29 18:28:56 Gargoyle user.info sysinit: setting up led USB
Aug 29 18:28:56 Gargoyle user.debug kernel: ar71xx-wdt: enabling watchdog timer
Aug 29 18:28:56 Gargoyle user.notice usb-modeswitch: 1-1:1.3: Manufacturer=Huawei_Technologies Product=HUAWEI_Mobile Serial=?
Aug 29 18:28:57 Gargoyle user.notice usb-modeswitch: 1-1:1.4: Manufacturer=Huawei_Technologies Product=HUAWEI_Mobile Serial=?
Aug 29 18:28:57 Gargoyle user.notice 3g-hotplug: Starting interface wan for device ttyUSB4
Aug 29 18:28:57 Gargoyle user.notice usb-modeswitch: 1-1:1.5: Manufacturer=Huawei_Technologies Product=HUAWEI_Mobile Serial=?
Aug 29 18:28:57 Gargoyle user.notice usb-modeswitch: 1-1:1.6: Manufacturer=Huawei_Technologies Product=HUAWEI_Mobile Serial=?
Aug 29 18:29:00 Gargoyle user.notice kernel: scsi 2:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Aug 29 18:29:00 Gargoyle user.notice kernel: scsi 3:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
Aug 29 18:29:00 Gargoyle user.debug kernel: usb-storage: device scan complete
Aug 29 18:29:00 Gargoyle user.debug kernel: usb-storage: device scan complete
Aug 29 18:29:00 Gargoyle user.notice kernel: sd 3:0:0:0: [sda] Attached SCSI removable disk
Aug 29 18:29:06 Gargoyle daemon.notice pppd[1767]: pppd 2.4.4 started by root, uid 0
Aug 29 18:29:07 Gargoyle local2.info chat[1772]: abort on (BUSY)
Aug 29 18:29:07 Gargoyle local2.info chat[1772]: abort on (NO CARRIER)
Aug 29 18:29:07 Gargoyle local2.info chat[1772]: abort on (ERROR)
Aug 29 18:29:07 Gargoyle local2.info chat[1772]: report (CONNECT)
Aug 29 18:29:07 Gargoyle local2.info chat[1772]: timeout set to 10 seconds
Aug 29 18:29:07 Gargoyle local2.info chat[1772]: send (AT&F^M)
Aug 29 18:29:07 Gargoyle local2.info chat[1772]: expect (OK)
Aug 29 18:29:07 Gargoyle local2.info chat[1772]: ^M
Aug 29 18:29:07 Gargoyle local2.info chat[1772]: ^SIMST:1^M
Aug 29 18:29:07 Gargoyle local2.info chat[1772]: ^M
Aug 29 18:29:07 Gargoyle local2.info chat[1772]: ^SRVST:2^M
Aug 29 18:29:07 Gargoyle local2.info chat[1772]: AT&F^M^M
Aug 29 18:29:07 Gargoyle local2.info chat[1772]: OK
Aug 29 18:29:07 Gargoyle local2.info chat[1772]:  -- got it
Aug 29 18:29:07 Gargoyle local2.info chat[1772]: send (ATE1^M)
Aug 29 18:29:07 Gargoyle local2.info chat[1772]: expect (OK)
Aug 29 18:29:07 Gargoyle local2.info chat[1772]: ^M
Aug 29 18:29:07 Gargoyle local2.info chat[1772]: ATE1^M^M
Aug 29 18:29:07 Gargoyle local2.info chat[1772]: OK
Aug 29 18:29:07 Gargoyle local2.info chat[1772]:  -- got it
Aug 29 18:29:07 Gargoyle local2.info chat[1772]: send (AT+CGDCONT=1,"IP","internet"^M)
Aug 29 18:29:08 Gargoyle local2.info chat[1772]: timeout set to 30 seconds
Aug 29 18:29:08 Gargoyle local2.info chat[1772]: expect (OK)
Aug 29 18:29:08 Gargoyle local2.info chat[1772]: ^M
Aug 29 18:29:08 Gargoyle local2.info chat[1772]: AT+CGDCONT=1,"IP","internet"^M^M
Aug 29 18:29:08 Gargoyle local2.info chat[1772]: OK
Aug 29 18:29:08 Gargoyle local2.info chat[1772]:  -- got it
Aug 29 18:29:08 Gargoyle local2.info chat[1772]: send (ATD*99***1#^M)
Aug 29 18:29:08 Gargoyle local2.info chat[1772]: expect (CONNECT)
Aug 29 18:29:08 Gargoyle local2.info chat[1772]: ^M
Aug 29 18:29:08 Gargoyle local2.info chat[1772]: ATD*99***1#^M^M
Aug 29 18:29:08 Gargoyle local2.info chat[1772]: CONNECT
Aug 29 18:29:08 Gargoyle local2.info chat[1772]:  -- got it
Aug 29 18:29:08 Gargoyle local2.info chat[1772]: send ( ^M)
Aug 29 18:29:08 Gargoyle daemon.info pppd[1767]: Serial connection established.
Aug 29 18:29:08 Gargoyle daemon.info pppd[1767]: Using interface 3g-wan
Aug 29 18:29:08 Gargoyle daemon.notice pppd[1767]: Connect: 3g-wan <--> /dev/ttyUSB4
Aug 29 18:29:09 Gargoyle daemon.info pppd[1767]: CHAP authentication succeeded
Aug 29 18:29:09 Gargoyle daemon.notice pppd[1767]: CHAP authentication succeeded
Aug 29 18:29:11 Gargoyle daemon.warn pppd[1767]: Could not determine remote IP address: defaulting to 10.64.64.64
Aug 29 18:29:11 Gargoyle daemon.notice pppd[1767]: local  IP address 178.56.30.159
Aug 29 18:29:11 Gargoyle daemon.notice pppd[1767]: remote IP address 10.64.64.64
Aug 29 18:29:11 Gargoyle daemon.notice pppd[1767]: primary   DNS address 217.116.100.65
Aug 29 18:29:11 Gargoyle daemon.notice pppd[1767]: secondary DNS address 79.163.127.70
Aug 29 18:29:12 Gargoyle user.notice ifup: Enabling Router Solicitations on wan (3g-wan)
Aug 29 18:29:12 Gargoyle user.info firewall: adding wan (3g-wan) to zone wan
Aug 29 18:29:14 Gargoyle cron.err crond[2014]: crond (busybox 1.15.3) started, log level 5
Aug 29 18:29:16 Gargoyle user.warn kernel: ipt_bandwidth: timezone shift detected, adjusting
Aug 29 18:29:16 Gargoyle cron.err crond[2338]: crond (busybox 1.15.3) started, log level 5
Aug 29 18:30:01 Gargoyle cron.err crond[2338]: USER root pid 2357 cmd /bin/3gtester
Aug 29 18:30:24 Gargoyle daemon.info hostapd: wlan0: STA 78:ca:39:b1:aa:2f IEEE 802.11: authenticated
Aug 29 18:30:24 Gargoyle daemon.info hostapd: wlan0: STA 78:ca:39:b1:aa:2f IEEE 802.11: associated (aid 1)
Aug 29 18:30:24 Gargoyle daemon.info hostapd: wlan0: STA 78:ca:39:b1:aa:2f WPA: pairwise key handshake completed (RSN)
Aug 29 18:30:26 Gargoyle daemon.info dnsmasq[1421]: reading /tmp/resolv.conf.auto
Aug 29 18:30:26 Gargoyle daemon.info dnsmasq[1421]: using nameserver 79.163.127.70#53
Aug 29 18:30:26 Gargoyle daemon.info dnsmasq[1421]: using nameserver 217.116.100.65#53
Aug 29 18:30:26 Gargoyle daemon.warn dnsmasq[1421]: ignoring nameserver 192.168.1.1 - local interface
Aug 29 18:30:26 Gargoyle daemon.info dnsmasq[1421]: using local addresses only for domain lan
Aug 29 18:30:26 Gargoyle daemon.info dnsmasq-dhcp[1421]: DHCPREQUEST(br-lan) 192.168.1.199 78:ca:39:b1:aa:2f
Aug 29 18:30:26 Gargoyle daemon.info dnsmasq-dhcp[1421]: DHCPACK(br-lan) 192.168.1.199 78:ca:39:b1:aa:2f MacBook-Pro-A
Aug 29 18:31:01 Gargoyle cron.err crond[2338]: USER root pid 2397 cmd /usr/bin/set_kernel_timezone >/dev/null 2>&1
Aug 29 18:31:35 Gargoyle authpriv.info dropbear[2399]: Child connection from 192.168.1.199:49185
Aug 29 18:31:41 Gargoyle authpriv.notice dropbear[2399]: Password auth succeeded for 'root' from 192.168.1.199:49185

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 1
B:  Alloc=  2/800 us ( 0%), #Int=  2, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 2.06
S:  Manufacturer=Linux 2.6.32.27 ehci_hcd
S:  Product=Atheros AR91xx built-in EHCI controller
S:  SerialNumber=ar71xx-ehci
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1506 Rev= 0.00
S:  Manufacturer=Huawei Technologies
S:  Product=HUAWEI Mobile
C:* #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA
A:  FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=option
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=01 Prot=09 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=08 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=03 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=02 Driver=option
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Chyba mu się polepszyło. Znowu wstał. Dzięki za pomoc

U mnie też tak jest, że jak uruchamiasz zimny ruter to nie chciał mi wstawać automatycznie ale mam skrypt 3gtest i on potem uruchamiał modem. Ten problem nie występuje jak restartuje ruter - wtedy modem łączy się bardzo szybko. Jadę na kompilacji z 13 sierpnia.

@blues55: sprawdź w logach co jest przyczyną - czy się nie przełączył czy połączenia nie może nawiązać. Jeżeli pomaga zapisane ustawień (czyli defacto iup wan) to samoczynnie automat co 3min też to robi.

"moduł modemu 3G nie radzi sobie z E372" to znaczy co z czym sobie nie radzi?

Ale wiesz że router nie ma nic z tym wspólnego, modem się tym zajmuje?

Tak swoją drogą jeżeli Ci się rozłącza to oznacza że router nie wyrabia z taką ilością energii jaką router potrzebujesz; w porządny aktywny zasilany oddzielnie hub zainwestuj.

Hub, zapewne to znów kwestia zasilania.

Nic konkretnego. Parę osób przedstawiało tu swoje typy, poszukaj.

Ten skrypt jest domyślnie wbudowany od kilkunastu wersji.