No to trafił mi ciężko przypadek o to co się stało szedł update i po resecie nie wstaje takie ma logi:

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00126
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000021
S - Reset status Config, 0x00000000
S - Core 0 Frequency, 0 MHz
B -       261 - PBL, Start
B -      1338 - bootable_media_detect_entry, Start
B -      1678 - bootable_media_detect_success, Start
B -      1692 - elf_loader_entry, Start
B -      5069 - auth_hash_seg_entry, Start
B -      7211 - auth_hash_seg_exit, Start
B -    577126 - elf_segs_hash_verify_entry, Start
B -    694622 - PBL, End
B -    694646 - SBL1, Start
B -    785467 - pm_device_init, Start
D -         7 - pm_device_init, Delta
B -    786929 - boot_flash_init, Start
D -     52838 - boot_flash_init, Delta
B -    843908 - boot_config_data_table_init, Start
D -      3833 - boot_config_data_table_init, Delta - (419 Bytes)
B -    851116 - clock_init, Start
D -      7583 - clock_init, Delta
B -    863170 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:1
B -    866584 - sbl1_ddr_set_params, Start
B -    871681 - cpr_init, Start
D -         2 - cpr_init, Delta
B -    876064 - Pre_DDR_clock_init, Start
D -         4 - Pre_DDR_clock_init, Delta
D -     13178 - sbl1_ddr_set_params, Delta
B -    889380 - pm_driver_init, Start
D -         2 - pm_driver_init, Delta
B -    959803 - sbl1_wait_for_ddr_training, Start
D -        27 - sbl1_wait_for_ddr_training, Delta
B -    975172 - Image Load, Start
D -    153151 - QSEE Image Loaded, Delta - (299560 Bytes)
B -   1128752 - Image Load, Start
D -      1444 - SEC Image Loaded, Delta - (2048 Bytes)
B -   1139045 - Image Load, Start
D -    248056 - APPSBL Image Loaded, Delta - (507851 Bytes)
B -   1387499 - QSEE Execution, Start
D -        60 - QSEE Execution, Delta
B -   1393686 - SBL1, End
D -    701148 - SBL1, Delta
S - Flash Throughput, 2012 KB/s  (809878 Bytes,  402466 us)
S - DDR Frequency, 672 MHz

U-Boot 2012.07 [Chaos Calmer 15.05.1,f53cef1+r49254] (Oct 30 2019 - 00:30:35)

smem ram ptable found: ver: 1 len: 3
DRAM:  256 MiB
machid : 0x8010001
NAND:  ID = 302012c
Vendor = 2c
Device = 1
ONFI device found
SF: Detected GD25Q16 with page size 4 KiB, total 2 MiB
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x200000
130 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
machid: 8010001
flash_type: 0
Uaztemain: enter into !
ZTE_InitFotaFlashPara: nand_curr_device=0
zte_getHandOffState: read data=0xff from 0x0
Hit any key to stop autoboot:  0
Creating 1 MTD partitions on "nand0":
0x000001800000-0x000003500000 : "mtd=0"
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
UBI: attached mtd2 to ubi0
UBI: MTD device name:            "mtd=0"
UBI: MTD device size:            29 MiB
UBI: number of good PEBs:        232
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     2
UBI: available PEBs:             72
UBI: total number of reserved PEBs: 160
UBI: number of PEBs reserved for bad PEB handling: 2
UBI: max/mean erase counter: 1/0
Read 0 bytes from volume kernel to 84000000
No size specified -> Using max size (4317184)
## Booting kernel from FIT Image at 84000000 ...
   Using 'config@ap.dk04.1-c1' configuration
   Trying 'kernel@1' kernel subimage
     Description:  ARM OpenWrt Linux-3.14.77
     Type:         Kernel Image
     Compression:  gzip compressed
     Data Start:   0x840000e4
     Data Size:    3616065 Bytes = 3.4 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x80208000
     Entry Point:  0x80208000
     Hash algo:    crc32
     Hash value:   6f6eccd5
     Hash algo:    sha1
     Hash value:   d07185b5ba5b31a7dd52ac6f21c29386213dd6c1
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Flattened Device Tree from FIT Image at 84000000
   Using 'config@ap.dk04.1-c1' configuration
   Trying 'fdt@ap.dk04.1-c1' FDT blob subimage
     Description:  ARM OpenWrt qcom-ipq40xx-ap.dkxx device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x843e7108
     Data Size:    38930 Bytes = 38 KiB
     Architecture: ARM
     Hash algo:    crc32
     Hash value:   6a16dabd
     Hash algo:    sha1
     Hash value:   d0b8da2df3282e3b8115fd4fbb83851ba56d4f81
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x843e7108
   Uncompressing Kernel Image ... OK
   Loading Device Tree to 86ff3000, end 86fff811 ... OK
eth0 MAC Address from ART is not valid
eth1 MAC Address from ART is not valid
Using machid 0x8010001 from environment

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14.77 (scl@scl_xa242_062) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 f53cef1+r49254) ) #1 SMP PREEMPT Wed Oct 30 01:51:19 CST 2019
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Qualcomm Technologies, Inc. IPQ40xx/AP-DK04.1-C1
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] PERCPU: Embedded 7 pages/cpu @cfdc7000 s7744 r8192 d12736 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 63744
[    0.000000] Kernel command line: ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait clk_ignore_unused
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] allocated 524288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 246044K/257024K available (4957K kernel code, 410K rwdata, 1824K rodata, 175K init, 574K bss, 10980K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbec00000 - 0xbfe00000   (  18 MB)
[    0.000000]       .text : 0xc0208000 - 0xc08a7974   (6783 kB)
[    0.000000]       .init : 0xc08a8000 - 0xc08d3e40   ( 176 kB)
[    0.000000]       .data : 0xc08d4000 - 0xc093a908   ( 411 kB)
[    0.000000]        .bss : 0xc093a908 - 0xc09ca114   ( 575 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] Architected cp15 timer(s) running at 48.00MHz (virt).
[    0.000009] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 2863311552512ns
[    0.000018] Switching to timer-based delay loop
[    0.000269] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
[    0.000286] pid_max: default: 32768 minimum: 301
[    0.000541] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000556] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.012905] Initializing cgroup subsys memory
[    0.012945] Initializing cgroup subsys devices
[    0.012997] CPU: Testing write buffer coherency: ok
[    0.013365] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.013436] Setting up static identity map for 0x80212808 - 0x80212860
[    0.090671] CPU1: Booted secondary processor
[    0.090715] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.110670] CPU2: Booted secondary processor
[    0.110704] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.130688] CPU3: Booted secondary processor
[    0.130722] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.130869] Brought up 4 CPUs
[    0.130910] SMP: Total of 4 processors activated (384.00 BogoMIPS).
[    0.130919] CPU: All CPU(s) started in SVC mode.
[    0.141784] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.142279] pinctrl core: initialized pinctrl subsystem
[    0.142717] regulator-dummy: no parameters
[    0.143422] NET: Registered protocol family 16
[    0.144961] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[    0.145597] cpuidle: using governor ladder
[    0.145610] cpuidle: using governor menu
[    0.158749] <CORE> glink_init: unable to create log context
[    0.159229] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
[    0.160019] sps:sps is ready.
[    0.165603] bio: create slab <bio-0> at 0
[    0.167424] SD0 VccQ: 1800 <--> 3000 mV
[    0.168068] SCSI subsystem initialized
[    0.168976] msm_bus_fabric_init_driver
[    0.169147] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[    0.169166] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[    0.169185] msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus4096 ctx1
[    0.169229] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[    0.169243] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[    0.169259] msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus1024 ctx1
[    0.194827] Advanced Linux Sound Architecture Driver Initialized.
[    0.195730] 80000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
[    0.195822] 80000.qcom,pcie supply vreg-1.8 not found, using dummy regulator
[    0.195879] 80000.qcom,pcie supply vreg-0.9 not found, using dummy regulator
[    0.195932] 80000.qcom,pcie supply gdsc-vdd not found, using dummy regulator
[    0.290501] msm_pcie_enable: msm_pcie_enable: PCIe: trigger the reset of endpoint of RC0.
[    0.300493] msm_pcie_enable: msm_pcie_enable: PCIe RC0 PHY is ready!
[    0.320496] msm_pcie_enable: msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[    0.460622] msm_pcie_enable: msm_pcie_enable: RC0:No. 1:LTSSM_STATE:0x0
[    0.500672] msm_pcie_enable: msm_pcie_enable: RC0:No. 2:LTSSM_STATE:0x0
[    0.540722] msm_pcie_enable: msm_pcie_enable: RC0:No. 3:LTSSM_STATE:0x0
[    0.580772] msm_pcie_enable: msm_pcie_enable: RC0:No. 4:LTSSM_STATE:0x0
[    0.620821] msm_pcie_enable: msm_pcie_enable: RC0:No. 5:LTSSM_STATE:0x0
[    0.660869] msm_pcie_enable: msm_pcie_enable: PCIe: trigger the reset of endpoint of RC0.
[    0.660882] msm_pcie_enable: msm_pcie_enable: PCIe RC0 link initialization failed
[    0.660910] msm_pcie_enumerate: msm_pcie_enumerate: PCIe: failed to enable RC0.
[    0.660921] msm_pcie_probe: msm_pcie_probe: PCIe: RC0 is not enabled during bootup; it will be enumerated upon WAKE signal.
[    0.660932] msm_pcie_probe: msm_pcie_probe: PCIe: Driver probe failed for RC0:-1
[    0.661365] msm_pcie: probe of 80000.qcom,pcie failed with error -1
[    0.661612] Switched to clocksource arch_sys_counter
[    0.663411] NET: Registered protocol family 2
[    0.664770] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.664818] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[    0.664867] TCP: Hash tables configured (established 2048 bind 2048)
[    0.664929] TCP: reno registered
[    0.664947] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.664978] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.665336] NET: Registered protocol family 1
[    0.665885]
[    0.665885] Version Rollback Feature Disabled
[    0.667531] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.676787] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.677129] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.678106] msgmni has been set to 480
[    0.680155] Key type asymmetric registered
[    0.680171] Asymmetric key parser 'x509' registered
[    0.680211] io scheduler noop registered
[    0.680222] io scheduler deadline registered (default)
[    0.681860] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
[    0.681934] tcsr 1953000.ess_tcsr: setting ess interface select = 0
[    0.682011] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
[    0.682070] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
[    0.683240] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.684272] msm_serial_hsl_probe: detected port #0 (ttyMSM0)
[    0.684313] msm_serial_hsl_probe: Bus scaling is disabled
[    0.684465] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 139, base_baud = 115200) is a MSM
[    0.684554] msm_hsl_console_setup: console setup on port #0
[    1.408807] console [ttyMSM0] enabled
[    1.412897] msm_serial_hsl_init: driver initialized
[    1.417733] msm_serial_hs module loaded
[    1.421473] qca_serial_hs module loaded
[    1.427216] sps: BAM device 0x07984000 is not registered yet.
[    1.431984] sps:BAM 0x07984000 is registered.
[    1.436098] msm_nand_bam_init: msm_nand_bam_init: BAM device registered: bam_handle 0xcf0c6e00
[    1.445016] sps:BAM 0x07984000 (va:0xd0b40000) enabled: ver:0x19, number of pipes:7
[    1.452745] msm_nand_version_check: nand_major:1, nand_minor:4, qpic_major:1, qpic_minor:4
[    1.461089] msm_nand_flash_onfi_probe: Found an ONFI compliant device MT29F1G08ABAEAWP    ,
[    1.469112] msm_nand_scan: wanglei: zte_nand_flash_id = 0x9580f12c
[    1.475352] msm_nand_scan: NAND Id: 0x9580f12c Buswidth: 8Bits Density: 128 MByte
[    1.482815] msm_nand_scan: pagesize: 2048 Erasesize: 131072 oobsize: 64 (in Bytes)
[    1.490348] msm_nand_scan: BCH ECC: 4 Bit
[    1.494369] msm_nand_scan: CFG0: 0x2a0408c0,      CFG1: 0x0804745c
[    1.494369]             RAWCFG0: 0x280420c0,   RAWCFG1: 0x0005045d
[    1.494369]           ECCBUFCFG: 0x00000203, ECCBCHCFG: 0x42040700
[    1.494369]      BAD BLOCK BYTE: 0x000001d1
[    1.517083] 12 ofpart partitions found on MTD device 7980000.qcom,nand
[    1.523528] Creating 12 MTD partitions on "7980000.qcom,nand":
[    1.529339] 0x000000000000-0x0000000a0000 : "fota-flag"
[    1.536555] 0x0000000a0000-0x000000120000 : "0:ART"
[    1.542173] 0x000000120000-0x0000001a0000 : "mac"
[    1.547605] 0x0000001a0000-0x000000260000 : "reserved2"
[    1.553897] 0x000000260000-0x000000660000 : "cfg-param"
[    1.564297] 0x000000660000-0x000000a60000 : "log"
[    1.574090] 0x000000a60000-0x000000b00000 : "oops"
[    1.579633] 0x000000b00000-0x000001000000 : "reserved3"
[    1.591146] 0x000001000000-0x000001800000 : "web"
[    1.605969] 0x000001800000-0x000003500000 : "rootfs"
[    1.647695] mtd: device 9 (rootfs) set to be root filesystem
[    1.652356] 0x000003500000-0x000004e00000 : "data"
[    1.689854] 0x000004e00000-0x000008000000 : "fota"
[    1.758263] msm_nand_probe: NANDc phys addr 0x7980000, BAM phys addr 0x7984000, BAM IRQ 133
[    1.765615] msm_nand_probe: Allocated DMA buffer at virt_addr 0xd0a62000, phys_addr 0x8f0a8000
[    1.775801] sps: BAM device 0x07884000 is not registered yet.
[    1.780531] sps:BAM 0x07884000 is registered.
[    1.784926] sps:BAM 0x07884000 (va:0xd0b80000) enabled: ver:0x19, number of pipes:12
[    1.793060] m25p80 spi0.0: found gd25q16, expected n25q128a11
[    1.798322] m25p80 spi0.0: gd25q16 (2048 Kbytes)
[    1.802973] 8 ofpart partitions found on MTD device spi0.0
[    1.808380] Creating 8 MTD partitions on "spi0.0":
[    1.813180] 0x000000000000-0x000000040000 : "0:SBL1"
[    1.819212] 0x000000040000-0x000000060000 : "0:MIBIB"
[    1.824304] 0x000000060000-0x0000000c0000 : "0:QSEE"
[    1.829269] 0x0000000c0000-0x0000000d0000 : "0:CDT"
[    1.834133] 0x0000000d0000-0x0000000e0000 : "0:DDRPARAMS"
[    1.839454] 0x0000000e0000-0x0000000f0000 : "0:APPSBLENV"
[    1.844895] 0x0000000f0000-0x0000001b0000 : "0:APPSBL"
[    1.849980] 0x0000001b0000-0x000000200000 : "0:reserved1"
[    1.866804] libphy: ipq40xx_mdio: probed
[    1.873536] ipq40xx-mdio 90000.mdio: ipq40xx-mdio driver was registered
[    1.879178] i2c /dev entries driver
[    1.884891] sdhci: Secure Digital Host Controller Interface driver
[    1.890036] sdhci: Copyright(c) Pierre Ossman
[    1.894410] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.900629] sdhci_msm 7824900.sdhci: Got SD LDO GPIO #33
[    2.005731] sdhci_msm 7824900.sdhci: Got CD GPIO #22.
[    2.016203] mmc0: no vmmc regulator found
[    2.091650] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA
[    2.105699] TCP: cubic registered
[    2.108688] NET: Registered protocol family 10
[    2.122934] NET: Registered protocol family 17
[    2.126452] Bridge firewalling registered
[    2.130343] 8021q: 802.1Q VLAN Support v1.8
[    2.134740] Registering SWP/SWPB emulation handler
[    2.140426] regulator-dummy: disabling
[    2.143747] UBI: attaching mtd9 to ubi0
[    2.413844] UBI: scanning is finished
[    2.429225] UBI: attached mtd9 (name "rootfs", size 29 MiB) to ubi0
[    2.434493] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    2.441230] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    2.447930] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    2.454791] UBI: good PEBs: 232, bad PEBs: 0, corrupted PEBs: 0
[    2.460673] UBI: user volume: 2, internal volumes: 1, max. volumes count: 128
[    2.467811] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 245742597
[    2.476750] UBI: available PEBs: 54, total reserved PEBs: 178, PEBs reserved for bad PEB handling: 20
[    2.485977] UBI: background thread "ubi_bgt0d" started, PID 73
[    2.488925] input: gpio_keys.9 as /devices/soc.1/gpio_keys.9/input/input0
[    2.489141] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    2.492627] clk: Not disabling unused clocks
[    2.492631] ALSA device list:
[    2.492634]   No soundcards found.
[    2.522539] VFS: Mounted root (squashfs filesystem) readonly on device 31:21.
[    2.528910] Freeing unused kernel memory: 172K (c08a8000 - c08d3000)
*****************call /etc/preinit_zte*********************
[    3.848898] init: Console is alive
[    3.851493] init: - watchdog -
[    3.890897] random: kmodloader: uninitialized urandom read (4 bytes read, 25 bits of entropy available)
[    7.789150] usbcore: registered new interface driver usbfs
[    7.793790] usbcore: registered new interface driver hub
[    7.799124] usbcore: registered new device driver usb
[    8.505055] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    8.509542] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    8.517539] xhci-hcd xhci-hcd.0.auto: irq 164, io mem 0x08a00000
[    8.524231] hub 1-0:1.0: USB hub found
[    8.526999] hub 1-0:1.0: 1 port detected
[    8.531321] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    8.536376] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    8.544943] hub 2-0:1.0: USB hub found
[    8.547737] hub 2-0:1.0: 1 port detected
[    8.552144] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    8.557090] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[    8.564998] xhci-hcd xhci-hcd.1.auto: irq 168, io mem 0x06000000
[    8.571595] hub 3-0:1.0: USB hub found
[    8.574511] hub 3-0:1.0: 1 port detected
[    8.578811] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    8.583848] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[    8.592437] hub 4-0:1.0: USB hub found
[    8.595218] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    8.607406] usbcore: registered new interface driver usb-storage
[    8.855732] init: - preinit -
[    8.861603] random: sh: uninitialized urandom read (4 bytes read, 45 bits of entropy available)
[    8.872065] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
*****************call /etc/preinit_zte*********************
[    8.892527] usb 2-1: Parent hub missing LPM exit latency info.  Power management will be impacted.
[    9.019725] random: procd: uninitialized urandom read (4 bytes read, 52 bits of entropy available)
[    9.218275] random: cat: uninitialized urandom read (4 bytes read, 55 bits of entropy available)
[    9.234625] random: mkdir: uninitialized urandom read (4 bytes read, 55 bits of entropy available)
*****************End of /etc/preinit_zte*********************    9.251492] random: procd: uninitialized urandom read (4 bytes read, 55 bits of entropy available)
[    9.264607] procd: - early -
[    9.266578] procd: - watchdog -
[    9.586967] random: hotplug-call: uninitialized urandom read (4 bytes read, 62 bits of entropy available)
[    9.609705] random: hotplug-call: uninitialized urandom read (4 bytes read, 62 bits of entropy available)
[    9.632428] random: hotplug-call: uninitialized urandom read (4 bytes read, 62 bits of entropy available)
[    9.654980] random: hotplug-call: uninitialized urandom read (4 bytes read, 62 bits of entropy available)
[   10.064527] procd: - ubus -
[   11.072678] procd: - init -
*************ZTE Init Script*************
Please press Enter to activate this console.
[   11.201722] QCE50: __qce_init_clk: Unable to get CE core src clk, set to NULL
[   11.207908] qcrypto 8e20000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x8e20000
[   11.215420] qcrypto 8e20000.qcrypto: CE device = 0x0
[   11.215420] , IO base, CE = 0xd1480000
[   11.215420] , Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
[   11.215420] IO base BAM = 0x  (null)
[   11.215420] BAM IRQ 239
[   11.215420] Engines Availability = 0x2010453
[   11.240014] sps:BAM 0x08e04000 is registered.
[   11.245075] sps:BAM 0x08e04000 (va:0xd14c0000) enabled: ver:0x27, number of pipes:4
[   11.252966] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000008e04000 irq 239
[   11.259895] bus_scale_table is NULL
[   11.263293] qcrypto 8e20000.qcrypto: qcrypto-ecb-aes
[   11.268137] qcrypto 8e20000.qcrypto: qcrypto-cbc-aes
[   11.273110] qcrypto 8e20000.qcrypto: qcrypto-ctr-aes
[   11.278020] qcrypto 8e20000.qcrypto: qcrypto-ecb-des
[   11.282997] qcrypto 8e20000.qcrypto: qcrypto-cbc-des
[   11.287912] qcrypto 8e20000.qcrypto: qcrypto-ecb-3des
[   11.292975] qcrypto 8e20000.qcrypto: qcrypto-cbc-3des
[   11.297982] qcrypto 8e20000.qcrypto: qcrypto-xts-aes
[   11.302976] qcrypto 8e20000.qcrypto: qcrypto-sha1
[   11.307623] qcrypto 8e20000.qcrypto: qcrypto-sha256
[   11.312523] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
[   11.318737] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
[   11.325012] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
[   11.331328] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
[   11.337772] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
[   11.344202] qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
[   11.350690] qcrypto 8e20000.qcrypto: qcrypto-hmac-sha1
[   11.355828] qcrypto 8e20000.qcrypto: qcrypto-hmac-sha256
[   11.361106] qcrypto 8e20000.qcrypto: qcrypto-aes-ccm
[   11.366086] qcrypto 8e20000.qcrypto: qcrypto-rfc4309-aes-ccm
[   11.371566] qcrypto: FIPS140-2 Known Answer Tests: Skipped
[   11.387382] nf_conntrack version 0.5.0 (3847 buckets, 15388 max)
[   11.396602] NTFS driver 2.1.30 [Flags: R/O MODULE].
[   11.403899] Initializing XFRM netlink socket
[   11.408464] NET: Registered protocol family 15
[   11.414527] PPP generic driver version 2.4.2
[   12.099975] ssdk_switch_device_num_init[985]:INFO:ess-switch dts node number: 1
[   12.106289] ssdk_dt_get_switch_node[824]:INFO:ess-switch DT exist!
[   12.112443] ssdk_dt_parse_access_mode[725]:INFO:switch_access_mode: local bus
[   12.119530] ssdk_dt_parse_access_mode[738]:INFO:switchreg_base_addr: 0xc000000
[   12.126733] ssdk_dt_parse_access_mode[739]:INFO:switchreg_size: 0x80000
[   12.133385] ssdk_dt_parse_mac_mode[235]:INFO:mac mode = 0x0
[   12.138889] ssdk_dt_parse_mac_mode[241]:INFO:mac mode1 doesn't exit!
[   12.145226] ssdk_dt_parse_mac_mode[250]:INFO:mac mode2 doesn't exit!
[   12.151562] ssdk_dt_parse_phy_info[508]:INFO:qcom,port_phyinfo DT doesn't exist!
[   12.158958] ssdk_dt_parse_mdio[598]:INFO:mdio DT exist!
[   12.164180] ssdk_dt_parse_led[798]:INFO:current dts led_source_num is 5
[   12.170757] ssdk_dt_parse_psgmii[690]:INFO:ess-psgmii DT exist!
[   12.176660] ssdk_plat_init start
[   12.180067] ssdk_plat_init[1231]:ERROR:enable ess clk
[   12.247759] malibu_phy_api_ops_init[2613]:INFO:qca probe malibu phy driver succeeded!
[   12.262619] malibu_phy_hw_init[2484]:INFO:MSF reset phy regiser 0505!
[   12.278501] malibu_phy_hw_init[2484]:INFO:MSF reset phy regiser 0505!
[   12.294395] malibu_phy_hw_init[2484]:INFO:MSF reset phy regiser 0505!
[   12.310275] malibu_phy_hw_init[2484]:INFO:MSF reset phy regiser 0505!
[   12.327574] malibu_phy_hw_init[2484]:INFO:MSF reset phy regiser 0505!
[   12.338227] regi_init[3332]:INFO:Initializing DESS!!
[   14.099641] ssdk_switch_register[1611]:INFO:Chip version 0x1401
[   14.104553] qca_link_polling_select[1273]:INFO:link-polling-required node does not exist
[   14.112625] ssdk_switch_register[1636]:INFO:polling is selected
[   14.118504] regi_init[3341]:INFO:Initializing DESS Done!!
[   14.123981] regi_init[3370]:INFO:qca-ssdk module init succeeded!
[   14.161871] **********************************************************
[   14.167369] * Driver    :NSS GMAC Driver - RTL v(3.72a)
[   14.172609] * Version   :1.0
[   14.175440] * Copyright :Copyright (c) 2013-2018 The Linux Foundation. All rights reserved.
[   14.183796] **********************************************************
[   14.206941] l2tp_core: L2TP core driver, V2.0
[   14.211261] l2tp_netlink: L2TP netlink interface
[   14.248815] qca-nss-drv.ko is loaded for symbol link
[   14.254737] sit: IPv6 over IPv4 tunneling driver
[   14.261139] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded.
[   14.272417] gre: GRE over IPv4 demultiplexor driver
[   14.277475] ip_gre: GRE over IPv4 tunneling driver
[   14.284722] ip6_gre: GRE over IPv6 tunneling driver
[   14.292968] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[   14.307893] QCA multicast snooping installed successfully
[   14.315798] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.324893] ZTE Generic Netlink Module Inserted without Lock
[   14.331797] edma_axi_probe!!!!!!!!!!!!!!!
[   14.335797] zte_nand_local_read():Reading Flash for Calibraton data from 0x0 and partition name is mac
[   14.344689] ***********************************************
[   14.349638] EDMA_LAN using MAC@ - using b4:1c:30:b3:df:78
[   14.355086] EDMA_WAN using MAC@ - using b4:1c:30:b3:e1:78
[   14.360396] ***********************************************
[   14.461921] QCA Hy-Fi multicast installation successfully
[   14.471351] nss_lag_init[354]:LAG Manager Installed
[   14.478449] NET: Registered protocol family 24
[   14.483362] PPTP driver version 0.8.5
[   14.490331] <NSS-CRYPTO>:module loaded (platform - IPQ806x, build - Build_ID - 10/30/19, 01:09:06)
[   14.498456] <NSS-CRYPTO>:qca-nss-crypto.ko is loaded for symbol link
[   14.505808] crypto bench loaded - Build_ID - 10/30/19, 01:09:08
[   14.510734] nss_crypto_register_user[151]:bf1ec214: Crypto Device is not ready
[   14.520516] nss_macsec init success
[   14.527622] nss_crypto_register_user[151]:bf1ec214: Crypto Device is not ready
[   14.536229] nss is not enabled on this platform
[   14.539734] nss_ipsecmgr_init[1262]:NSS is not enabled in this platform
[   14.551017] nss_crypto_register_user[151]:bf1ec214: Crypto Device is not ready
[   14.558364] nss is not enabled on this platform
[   14.568311] u32 classifier
[   14.569988]     input device check on
[   14.573751]     Actions configured
[   14.578809] Mirror/redirect action on
[   14.603975] fuse init (API version 7.22)
[   14.613786] arp_tables: (C) 2002 David S. Miller
[   14.620830] usbcore: registered new interface driver cdc_wdm
[   14.639526] Ebtables v2.0 registered
[   14.644116] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.651365] ipt_TRIGGER: module license 'unspecified' taints kernel.
[   14.656740] Disabling lock debugging due to kernel taint
[   14.662806] iptables target:TRIGGER __init
[   14.672258] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   14.712850] nf_conntrack_rtsp v0.6.21 loading
[   14.816399] nf_nat_rtsp v0.6.21 loading
[   14.844742] usbcore: registered new interface driver usbserial
[   14.849753] usbcore: registered new interface driver usbserial_generic
[   14.856260] usbserial: USB Serial support registered for generic
[   14.900145] xt_time: kernel timezone is -0000
[   14.906697] usbcore: registered new interface driver cdc_ether
[   14.933514] qmi_wwan: probe of 2-1:1.2 failed with error -22
[   14.938309] qmi_wwan 2-1:1.3: bogus CDC Union: master=0, slave=0
[   14.944272] qmi_wwan: probe of 2-1:1.3 failed with error -1
[   14.949812] qmi_wwan 2-1:1.4: bogus CDC Union: master=0, slave=0
[   14.955783] qmi_wwan: probe of 2-1:1.4 failed with error -1
[   14.976695] qmi_wwan 2-1:1.5: cdc-wdm0: USB WDM device
[   14.980808] driver_info->flags 2400 idVendor 19d2 idProduct 1485
[   14.987784] qmi_wwan 2-1:1.5 usb0: register 'qmi_wwan' at usb-xhci-hcd.0.auto-1, Qualcomm WWAN/QMI device, 32:03:32:a4:e1:9f
[   14.998182] [USBNET] MODULE_9x30_QMAP_ENABLE enable & dev->rx_urb_size is 16384 ,dev->rx_qlen is 27,usbnet_memory_mutil is 10
[   15.009616] usbcore: registered new interface driver qmi_wwan
[   15.019569] driver_info->flags 1038 idVendor 19d2 idProduct 1485
[   15.025566] rndis_host 2-1:1.0 rndis0: register 'rndis_host' at usb-xhci-hcd.0.auto-1, RNDIS device, 36:4b:50:b7:ef:da
[   15.035512] [USBNET] MODULE_9x30_QMAP_ENABLE enable & dev->rx_urb_size is 2048 ,dev->rx_qlen is 222,usbnet_memory_mutil is 10
[   15.047012] usbcore: registered new interface driver rndis_host
[   15.061068] usbcore: registered new interface driver option
[   15.065821] usbserial: USB Serial support registered for GSM modem (1-port)
[   15.073193] option 2-1:1.2: GSM modem (1-port) converter detected
[   15.078681] find modem i:45
[   15.081418] assign port->index 0
[   15.085197] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
[   15.091840] option 2-1:1.3: GSM modem (1-port) converter detected
[   15.097599] find modem i:45
[   15.100340] assign port->index 1
[   15.104128] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
[   15.110714] option 2-1:1.4: GSM modem (1-port) converter detected
[   15.116545] find modem i:45
[   15.119255] assign port->index 3
[   15.122992] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
*************Set Ethernet SMP*************
[   15.862731] yaffs: dev is 32505860 name is "mtdblock4" rw
[   15.867103] yaffs: passed flags ""
[   16.095661] yaffs: dev is 32505861 name is "mtdblock5" rw
[   16.100029] yaffs: passed flags ""
[   16.163006] yaffs: dev is 32505867 name is "mtdblock11" rw
[   16.167460] yaffs: passed flags ""
*************load ECM*************
[   16.932234] msm_nand_read_oob: 0x4e28800 datalen 0x800 ooblen 0 err -74 corrected 0
[   16.941061] msm_nand_read_oob: 0x4e2a000 datalen 0x800 ooblen 0 err -74 corrected 0
[   16.948969] msm_nand_read_oob: 0x4e2a800 datalen 0x800 ooblen 0 err -74 corrected 0
[   16.956834] msm_nand_read_oob: 0x4e2b000 datalen 0x800 ooblen 0 err -74 corrected 0
[   16.964666] msm_nand_read_oob: 0x4e2b800 datalen 0x800 ooblen 0 err -74 corrected 0
[   17.256929] ECM init
[   17.258157] ECM database jhash random seed: 0x243a13a2
[   17.265247] ECM init complete
[   17.306857] Load cfg new driver...
[   17.309241] cfg init, /home/scl/ci/workspace/Soft4_MF286D_H3GSE_CPE/build_folder/qsdk/build_dir/target-arm_cortex-a7_uClibc-1.0.14_eabi/linux-ipq806x/cfg-1.0/cfg_param.c 583
[   17.379834]
[   17.380299] CAP_wan_ipaddr=0.0.0
[   17.383508] 4341505f77616e5f6970616464723d302e302e30
[   17.393562]
[   17.393562]  cfg init end, /home/scl/ci/workspace/Soft4_MF286D_H3GSE_CPE/build_folder/qsdk/build_dir/target-arm_cortex-a7_uClibc-1.0.14_eabi/linux-ipq806x/cfg-1.0/cfg_param.c 642
[   17.409972] cfg init, /home/scl/ci/workspace/Soft4_MF286D_H3GSE_CPE/build_folder/qsdk/build_dir/target-arm_cortex-a7_uClibc-1.0.14_eabi/linux-ipq806x/cfg-1.0/cfg_param.c 583
[   17.436045]
[   17.436509] fac_mode=1sim_imsi=
[   17.439718] 6661635f6d6f64653d310073696d5f696d73693d
[   17.444714]
[   17.444714]  cfg init end, /home/scl/ci/workspace/Soft4_MF286D_H3GSE_CPE/build_folder/qsdk/build_dir/target-arm_cortex-a7_uClibc-1.0.14_eabi/linux-ipq806x/cfg-1.0/cfg_param.c 642
[   17.462085] cfg init, /home/scl/ci/workspace/Soft4_MF286D_H3GSE_CPE/build_folder/qsdk/build_dir/target-arm_cortex-a7_uClibc-1.0.14_eabi/linux-ipq806x/cfg-1.0/cfg_param.c 583
[   17.477710]
[   17.478955]
[   17.482167] 0000000000000000000000000000000000000000
[   17.487117]
[   17.487117]  cfg init end, /home/scl/ci/workspace/Soft4_MF286D_H3GSE_CPE/build_folder/qsdk/build_dir/target-arm_cortex-a7_uClibc-1.0.14_eabi/linux-ipq806x/cfg-1.0/cfg_param.c 642
[   17.577581] Not a bridge device, or device not found: br-
[   17.656319] Not a bridge device, or device not found: br-
enter is_fota_update_successed.
find a good block.
last find blk_num = 0
****fota_update_flag in /dev/mtd0 is ▒****
[   18.942244] msm_nand_read_oob: 0x4e2d000 datalen 0x800 ooblen 0 err -74 corrected 0
[   18.950051] msm_nand_read_oob: 0x4e2d800 datalen 0x800 ooblen 0 err -74 corrected 0
[   18.957503] ------------[ cut here ]------------
[   18.961276] kernel BUG at fs/yaffs2/yaffs_guts.c:1068!
[   18.966395] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
[   18.972210] Modules linked in: cfg ecm option iptable_nat usb_wwan rndis_host qmi_wwan nf_nat_pptp nf_nat_ipv4 nf_nat_amanda nf_conntrack_pptp nf_conntrack_ipv6 nf_conntrack_ipv4 nf_conntrack_amanda ebtable_nat ebtable_filter ebtable_broute cdc_ether xt_webstr xt_time xt_tcpudp xt_tcpmss xt_string xt_statistic xt_state xt_recent xt_quota xt_policy xt_pkttype xt_physdev xt_owner xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_iprange xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_addrtype xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY usbserial usbnet usbmon ts_kmp ts_fsm ts_bm pppoe ppp_async nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_rtsp nf_nat_proto_gre nf_nat_irc nf_nat_h323 nf_nat_ftp nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtsp nf_conntrack_proto_gre nf_conntrack_irc nf_conntrack_h323 nf_conntrack_ftp nf_conntrack_broadcast l2tp_ppp iptable_raw iptable_mangle iptable_filter ipt_ah ipt_TRIGGER(P) ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables ebtables ebt_vlan ebt_stp ebt_snat ebt_redirect ebt_pkttype ebt_mark_m ebt_mark ebt_limit ebt_ip6 ebt_ip ebt_dnat ebt_arpreply ebt_arp ebt_among ebt_802_3 crc_ccitt cdc_wdm arptable_filter arpt_mangle arp_tables zte_check_privateip fuse sch_teql sch_tbf sch_sfq sch_red sch_prio sch_pie sch_htb sch_gred sch_fq sch_dsmark sch_codel em_text em_nbyte em_meta em_cmp cls_basic act_police act_ipt act_connmark act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_hfsc sch_ingress qca_nss_ipsec qca_nss_cfi_ocf qca_nss_tunipip6 qca_nss_tun6rd qca_nss_ipsecmgr qca_nss_cfi_cryptoapi qca_nss_qdisc qca_nss_macsec qca_nss_crypto_tool qca_nss_crypto qca_nss_pptp pptp pppox qca_nss_map_t qca_nss_lag_mgr qca_nss_l2tpv2 qca_nss_gre hyfi_bridging nf_nat_proto_sctp nf_nat libcrc32c nf_conntrack_proto_sctp essedma zte_genl_kernel ip6t_REJECT ip6table_raw ip6table_mangle ip6table_filter ip6_tables x_tables qca_mcs qca_85xx_sw hyfi_qdisc msdos bonding ip6_gre ip_gre gre ifb nat46 sit qca_nss_drv l2tp_netlink l2tp_core ipcomp6 xfrm6_tunnel xfrm6_mode_tunnel xfrm6_mode_transport xfrm6_mode_beet esp6 ah6 ipcomp xfrm4_tunnel xfrm4_mode_tunnel xfrm4_mode_transport xfrm4_mode_beet esp4 ah4 ip6_tunnel qca_nss_gmac tunnel6 tunnel4 ip_tunnel qca_ssdk ppp_generic slhc af_key xfrm_user xfrm_ipcomp xfrm_algo ntfs qrfs nf_conntrack shortcut_fe_drv aq_phy shortcut_fe_ipv6 shortcut_fe sha1_generic qcrypto cryptosoft cryptodev ocf md5 hmac des_generic cbc authenc usb_storage leds_gpio bootconfig xhci_hcd dwc3 udc_core dwc3_qcom dwc3_ipq40xx phy_qcom_ssusb phy_qcom_hsusb phy_qca_uniphy phy_qca_baldur sd_mod ahci_platform usbcore usb_common mii
[   19.211807] CPU: 0 PID: 670 Comm: yaffs-bg-1 Tainted: P             3.14.77 #1
[   19.219004] task: ce512100 ti: cd008000 task.ti: cd008000
[   19.224392] PC is at yaffs_put_chunk_in_file+0x44/0x184
[   19.229595] LR is at yaffs_put_chunk_in_file+0x44/0x184
[   19.234803] pc : [<c03affd0>]    lr : [<c03affd0>]    psr: 60000013
[   19.234803] sp : cd009dc0  ip : 00000000  fp : 0000009b
[   19.246259] r10: 00000000  r9 : cd0cb800  r8 : cd04a008
[   19.251466] r7 : 00000546  r6 : 00000003  r5 : cd0bb300  r4 : cd048000
[   19.257978] r3 : 60000013  r2 : 60000013  r1 : 60000093  r0 : 0000003e
[   19.264499] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[   19.271789] Control: 10c5387d  Table: 8d0d806a  DAC: 00000015
[   19.277508] Process yaffs-bg-1 (pid: 670, stack limit = 0xcd008238)
[   19.283758] Stack: (0xcd009dc0 to 0xcd00a000)
[   19.288107] 9dc0: cd048000 cd009e98 00000546 00000001 00000506 c03b50c0 cd048000 00000546
[   19.296264] 9de0: 00000000 cd04a0a0 c08f64c4 c03b0418 00000000 cd0cb800 00000001 00000001
[   19.304437] 9e00: cd04a008 cd0cb800 c08f64c4 c03b4fa8 cfdc86c8 ce512148 cfdc86c8 00000023
[   19.312599] 9e20: 00000000 00000001 00000001 c025879c 00000005 cf804600 00000000 00000000
[   19.320754] 9e40: cd049000 c03b918c 00000040 cd048000 cd048000 00000000 cd0bb300 00000002
[   19.328905] 9e60: cd04a008 cd0cb800 c08f64c4 c03b1638 00000000 c08edc80 cede4f00 c08edc80
[   19.337061] 9e80: 00000000 00005f3b 00000001 00000001 00000003 00000002 00000001 00000002
[   19.345221] 9ea0: 00000001 00000000 00000003 00000000 00000000 00000001 00001015 00000000
[   19.353379] 9ec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   19.361543] 9ee0: 00000000 cd048000 00005f00 ffff9236 ffff9236 c0962358 cd008018 cd0e8700
[   19.369704] 9f00: c08f64c4 c03b2938 000061ec 00000000 cd048000 c03accf0 c08edc80 cd008000
[   19.377863] 9f20: cd009f64 00000000 00000200 ffff9236 c093d800 c03ab324 ce512100 ffffffff
[   19.386022] 9f40: 00000000 cd69d140 00000000 cd048000 c03acbc8 00000000 00000000 00000000
[   19.394180] 9f60: 00000000 c0245ea8 00000000 00000000 cd009f9c cd048000 00000000 00000000
[   19.402355] 9f80: cd009f80 cd009f80 00000000 00000000 cd009f90 cd009f90 cd009fac cd69d140
[   19.410498] 9fa0: c0245dd0 00000000 00000000 c0208d30 00000000 00000000 00000000 00000000
[   19.418659] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   19.426829] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[   19.435002] [<c03affd0>] (yaffs_put_chunk_in_file) from [<c03b1638>] (yaffs_check_gc+0xb04/0xb54)
[   19.443839] [<c03b1638>] (yaffs_check_gc) from [<c03b2938>] (yaffs_bg_gc+0x38/0x58)
[   19.451477] [<c03b2938>] (yaffs_bg_gc) from [<c03accf0>] (yaffs_bg_thread_fn+0x128/0x1e0)
[   19.459636] [<c03accf0>] (yaffs_bg_thread_fn) from [<c0245ea8>] (kthread+0xd8/0xec)
[   19.467277] [<c0245ea8>] (kthread) from [<c0208d30>] (ret_from_fork+0x14/0x24)
[   19.474478] Code: e3130101 0a000001 e59f0138 ebfae8ee (e7f001f2)
[   19.480548] ---[ end trace 4a8299c39ef97e0a ]---
[   19.485146] Kernel panic - not syncing: Fatal exception
[   19.490366] CPU1: stopping
[   19.493052] CPU: 1 PID: 0 Comm: swapper/1 Tainted: P      D      3.14.77 #1
[   19.500014] [<c021e348>] (unwind_backtrace) from [<c021b21c>] (show_stack+0x10/0x14)
[   19.507730] [<c021b21c>] (show_stack) from [<c03eed14>] (dump_stack+0x80/0xa0)
[   19.514932] [<c03eed14>] (dump_stack) from [<c021d5f0>] (handle_IPI+0xb8/0x140)
[   19.522221] [<c021d5f0>] (handle_IPI) from [<c02084fc>] (gic_handle_irq+0x58/0x60)
[   19.529773] [<c02084fc>] (gic_handle_irq) from [<c02095c0>] (__irq_svc+0x40/0x70)
[   19.537231] Exception stack(0xcf8c3fa0 to 0xcf8c3fe8)
[   19.542274] 3fa0: ffffffed 00000000 0f4fd000 c020a040 cf8c2000 cf8c2030 10c0387d c093ac08
[   19.550433] 3fc0: 8020406a 410fc075 00000000 00000000 c08f2e88 cf8c3fe8 c0218e88 c0218e8c
[   19.558586] 3fe0: 60000013 ffffffff
[   19.562068] [<c02095c0>] (__irq_svc) from [<c0218e8c>] (arch_cpu_idle+0x38/0x5c)
[   19.569450] [<c0218e8c>] (arch_cpu_idle) from [<c026b5c8>] (cpu_startup_entry+0xa4/0x108)
[   19.577673] [<c026b5c8>] (cpu_startup_entry) from [<802085a4>] (0x802085a4)
[   19.584542] CPU2: stopping
[   19.587235] CPU: 2 PID: 0 Comm: swapper/2 Tainted: P      D      3.14.77 #1
[   19.594189] [<c021e348>] (unwind_backtrace) from [<c021b21c>] (show_stack+0x10/0x14)
[   19.601911] [<c021b21c>] (show_stack) from [<c03eed14>] (dump_stack+0x80/0xa0)
[   19.609113] [<c03eed14>] (dump_stack) from [<c021d5f0>] (handle_IPI+0xb8/0x140)
[   19.616404] [<c021d5f0>] (handle_IPI) from [<c02084fc>] (gic_handle_irq+0x58/0x60)
[   19.623954] [<c02084fc>] (gic_handle_irq) from [<c02095c0>] (__irq_svc+0x40/0x70)
[   19.631413] Exception stack(0xcf8c5fa0 to 0xcf8c5fe8)
[   19.636458] 5fa0: ffffffed 00000000 0f505000 c020a040 cf8c4000 cf8c4030 10c0387d c093ac08
[   19.644616] 5fc0: 8020406a 410fc075 00000000 00000000 c08f2e88 cf8c5fe8 c0218e88 c0218e8c
[   19.652768] 5fe0: 60000013 ffffffff
[   19.656249] [<c02095c0>] (__irq_svc) from [<c0218e8c>] (arch_cpu_idle+0x38/0x5c)
[   19.663631] [<c0218e8c>] (arch_cpu_idle) from [<c026b5c8>] (cpu_startup_entry+0xa4/0x108)
[   19.671812] [<c026b5c8>] (cpu_startup_entry) from [<802085a4>] (0x802085a4)
[   19.678725] CPU3: stopping
[   19.681419] CPU: 3 PID: 711 Comm: ssdk_sh Tainted: P      D      3.14.77 #1
[   19.688373] [<c021e348>] (unwind_backtrace) from [<c021b21c>] (show_stack+0x10/0x14)
[   19.696092] [<c021b21c>] (show_stack) from [<c03eed14>] (dump_stack+0x80/0xa0)
[   19.703299] [<c03eed14>] (dump_stack) from [<c021d5f0>] (handle_IPI+0xb8/0x140)
[   19.710589] [<c021d5f0>] (handle_IPI) from [<c02084fc>] (gic_handle_irq+0x58/0x60)
[   19.718139] [<c02084fc>] (gic_handle_irq) from [<c02095c0>] (__irq_svc+0x40/0x70)
[   19.725597] Exception stack(0xccef1b20 to 0xccef1b68)
[   19.730640] 1b20: 06bb959e 1f3c3ff0 cec80558 0000000a cec80000 cec806dc 30fecd00 000001f8
[   19.738800] 1b40: 27880409 0212b54f 5bba602f 00000259 2ba2c2cb ccef1b68 ffffff12 c0407e5c
[   19.746952] 1b60: 80000113 ffffffff
[   19.750436] [<c02095c0>] (__irq_svc) from [<c0407e5c>] (lzma_main+0x68c/0x96c)
[   19.757642] [<c0407e5c>] (lzma_main) from [<c0408650>] (xz_dec_lzma2_run+0x514/0x764)
[   19.765452] [<c0408650>] (xz_dec_lzma2_run) from [<c0408c80>] (xz_dec_bcj_run+0xb8/0x1f8)
[   19.773611] [<c0408c80>] (xz_dec_bcj_run) from [<c0406fd4>] (xz_dec_run+0x354/0x82c)
[   19.781339] [<c0406fd4>] (xz_dec_run) from [<c035b640>] (squashfs_xz_uncompress+0xec/0x19c)
[   19.789669] [<c035b640>] (squashfs_xz_uncompress) from [<c035b4e0>] (squashfs_decompress+0x60/0xbc)
[   19.798700] [<c035b4e0>] (squashfs_decompress) from [<c03575e0>] (squashfs_read_data+0x484/0x5e0)
[   19.807557] [<c03575e0>] (squashfs_read_data) from [<c035b030>] (squashfs_readpage_block+0x274/0x38c)
[   19.816757] [<c035b030>] (squashfs_readpage_block) from [<c0358eec>] (squashfs_readpage+0x6e0/0x89c)
[   19.825872] [<c0358eec>] (squashfs_readpage) from [<c029b968>] (__do_page_cache_readahead+0x1c0/0x200)
[   19.835160] [<c029b968>] (__do_page_cache_readahead) from [<c029376c>] (filemap_fault+0x174/0x3cc)
[   19.844101] [<c029376c>] (filemap_fault) from [<c02aaf9c>] (__do_fault+0xc0/0x480)
[   19.851651] [<c02aaf9c>] (__do_fault) from [<c02adad4>] (handle_mm_fault+0x434/0xd04)
[   19.859466] [<c02adad4>] (handle_mm_fault) from [<c021fe6c>] (do_page_fault+0x114/0x26c)
[   19.867535] [<c021fe6c>] (do_page_fault) from [<c02083a8>] (do_DataAbort+0x34/0x98)
[   19.875172] [<c02083a8>] (do_DataAbort) from [<c0209738>] (__dabt_usr+0x38/0x40)
[   19.882542] Exception stack(0xccef1fb0 to 0xccef1ff8)
[   19.887581] 1fa0:                                     00000000 be60dc14 b6b76018 b6af4000
[   19.895744] 1fc0: 00000001 00000000 b6af40d4 b6af3068 b6af40b4 00000004 be60dcf0 be60db5c
[   19.903904] 1fe0: be60dc14 be60db4c b6b78de0 b6adf6d4 60000010 ffffffff
[   19.910532] Rebooting in 3 seconds..

Próbowałem przywrócić mtd9 ale nie pomaga. Macie jakieś pomysły?