Cześć,
Posiadam router TP-Link Archer C6 v2 z wgranym (według poradnika Cezarego (TUN)) OpenWrt 19.07 luci, Snapshot. Łącze się do niego poprzez klienta OpenVPN 2.4.7 na Windowsie. Po zestawieniu połączenia mogę się dostać do routera, lecz do sieci LAN za tym routerem już nie.
Klient i serwer nie mają tej samej adresacji. Klient 192.168.0.1, sieć lan za routerem 192.168.2.1

Podczas konfiguracji dodałem w konfigu serwera wpis:
option push 'route 192.168.2.0 255.255.255.0'

Może coś tutaj w moim firewall jest naknocone ? Z góry dziękuję za wszelkie sugestie.

config defaults
    option input 'ACCEPT'
    option output 'ACCEPT'
    option forward 'REJECT'
    option synflood_protect '1'

config zone
    option name 'lan'
    list network 'lan'
    option input 'ACCEPT'
    option output 'ACCEPT'
    option forward 'REJECT'

config zone
    option name 'wan'
    list network 'wan'
    list network 'wan6'
    option input 'REJECT'
    option output 'ACCEPT'
    option forward 'REJECT'
    option masq '1'
    option mtu_fix '1'

config forwarding
    option src 'lan'
    option dest 'wan'

config rule
    option name 'Allow-DHCP-Renew'
    option src 'wan'
    option proto 'udp'
    option dest_port '68'
    option target 'ACCEPT'
    option family 'ipv4'

config rule
    option name 'Allow-Ping'
    option src 'wan'
    option proto 'icmp'
    option icmp_type 'echo-request'
    option family 'ipv4'
    option target 'ACCEPT'

config rule
    option name 'Allow-IGMP'
    option src 'wan'
    option proto 'igmp'
    option family 'ipv4'
    option target 'ACCEPT'

config rule
    option name 'Allow-DHCPv6'
    option src 'wan'
    option proto 'udp'
    option src_ip 'fc00::/6'
    option dest_ip 'fc00::/6'
    option dest_port '546'
    option family 'ipv6'
    option target 'ACCEPT'

config rule
    option name 'Allow-MLD'
    option src 'wan'
    option proto 'icmp'
    option src_ip 'fe80::/10'
    list icmp_type '130/0'
    list icmp_type '131/0'
    list icmp_type '132/0'
    list icmp_type '143/0'
    option family 'ipv6'
    option target 'ACCEPT'

config rule
    option name 'Allow-ICMPv6-Input'
    option src 'wan'
    option proto 'icmp'
    list icmp_type 'echo-request'
    list icmp_type 'echo-reply'
    list icmp_type 'destination-unreachable'
    list icmp_type 'packet-too-big'
    list icmp_type 'time-exceeded'
    list icmp_type 'bad-header'
    list icmp_type 'unknown-header-type'
    list icmp_type 'router-solicitation'
    list icmp_type 'neighbour-solicitation'
    list icmp_type 'router-advertisement'
    list icmp_type 'neighbour-advertisement'
    option limit '1000/sec'
    option family 'ipv6'
    option target 'ACCEPT'

config rule
    option name 'Allow-ICMPv6-Forward'
    option src 'wan'
    option dest '*'
    option proto 'icmp'
    list icmp_type 'echo-request'
    list icmp_type 'echo-reply'
    list icmp_type 'destination-unreachable'
    list icmp_type 'packet-too-big'
    list icmp_type 'time-exceeded'
    list icmp_type 'bad-header'
    list icmp_type 'unknown-header-type'
    option limit '1000/sec'
    option family 'ipv6'
    option target 'ACCEPT'

config rule
    option name 'Allow-IPSec-ESP'
    option src 'wan'
    option dest 'lan'
    option proto 'esp'
    option target 'ACCEPT'

config rule
    option name 'Allow-ISAKMP'
    option src 'wan'
    option dest 'lan'
    option dest_port '500'
    option proto 'udp'
    option target 'ACCEPT'

config include
    option path '/etc/firewall.user'

config rule
    option name 'OpenVPN'
    option target 'ACCEPT'
    option proto 'udp'
    option dest_port '1194'
    option src '*'

config zone
    option name 'VPN'
    option input 'ACCEPT'
    option forward 'ACCEPT'
    list network 'lan'
    list network 'wan'
    option output 'ACCEPT'

config forwarding
    option src 'VPN'
    option dest 'wan'

config forwarding
    option dest 'VPN'
    option src 'lan'

config forwarding
    option dest 'VPN'
    option src 'wan'

config forwarding
    option dest 'lan'
    option src 'VPN'