551 Odpowiedź przez Cezary (edytowany przez Cezary 2022-01-26 18:44:25)

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,107

Odp: ZTE MF286 zmiana FW

Królik napisał/a:
Cezary napisał/a:

I dlatego chyba przeportuję to sobie do 21.02 i przynajmniej będą obrazy dostępne dla chętnych.

Wersja bez nvm z początku PR powinna być prosta do backportu.

Masz to jeszcze gdzieś? Sam dts, resztę sobie dociągnę.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

552 Odpowiedź przez smereka

  • Zarejestrowany: 2014-07-09
  • Posty: 2,443

Odp: ZTE MF286 zmiana FW

Ktoś wspomniał chyba w wątku że na portalu aukcyjnym sprzedają z taką usterką. A skoro tego jest więcej to teraz fajnie by było znaleźć przyczynę co powoduje że modem całkowicie pada ale nie do tego stopnia jak widać po moich testach żeby go w ogóle nie widzieć

553 Odpowiedź przez MiG25

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE MF286 zmiana FW

Najprawdopodobniej wyłączenie zasilania podczas update i flashowania pamięci modemu.
Podczas update router przez jakiś czas nie daje oznak życia , przez co jak go użytkownik nakryje po prostu wyłącza i nieszczęście gotowe.

554 Odpowiedź przez er2de2

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: ZTE MF286 zmiana FW

Cezary napisał/a:

Masz to jeszcze gdzieś? Sam dts, resztę sobie dociągnę.

Ja mam  smile  proszę bardzo

Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

555 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,107

Odp: ZTE MF286 zmiana FW

@Królik: zostawiłeś plik kalibracyjny jako board-zte,mf286d.qca4019 a powinno być board-zte_mf286d.qca4019

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

556 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,107

Odp: ZTE MF286 zmiana FW

Panie i panowie,
jeżeli ktoś chce testować to przeportowałem PR @Królika do openwrt-21.02 i obrazy dla ZTE MF286D dostępne są tutaj: https://dl.eko.one.pl/test/zte_mf286d/

Obraz czysty i z luci, do testów. Niestety, przyznam się że nie wgrywałem tego, bo mój MF286D jest chwilowo daleko ode mnie, więc jak ktoś chce sprawdzić to było by super.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

557 Odpowiedź przez er2de2

  • er2de2
  • er2de2
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-04-10
  • Posty: 105

Odp: ZTE MF286 zmiana FW

@Cezary dorzucisz config.buildinfo?

Xiaomi AX3000T - OpenWrt 25.12 (ubootmod) by Cezary
Cudy WR3000S - OpenWrt 25.12 by Cezary
I use Arch btw

558 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,107

Odp: ZTE MF286 zmiana FW

Wrzuciłem. Tylko odśwież sobie widok bo przerzuciłem obrazy luci do podkatalogu.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

559 Odpowiedź przez MiG25 (edytowany przez MiG25 2022-01-26 20:25:16)

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE MF286 zmiana FW

Cezary napisał/a:

Panie i panowie,
jeżeli ktoś chce testować to przeportowałem PR @Królika do openwrt-21.02 i obrazy dla ZTE MF286D dostępne są tutaj: https://dl.eko.one.pl/test/zte_mf286d/

Obraz czysty i z luci, do testów. Niestety, przyznam się że nie wgrywałem tego, bo mój MF286D jest chwilowo daleko ode mnie, więc jak ktoś chce sprawdzić to było by super.

Wgrałem z luci, odpaliło się ,ale nie mogę zamienić modemu na wan , nie startuje.
w uci mam:
network.wan=interface
network.wan.proto='qmi'
network.wan.device='/dev/cdc-wdm0'
network.wan.apn='internet'
network.wan.auth='none'
network.wan.pdptype='ipv4v6'

ale tych dwóch ostatnich pozycji nie mogę się pozbyć... co usunę to się pojawiają...

EDIT: Za którymś z kolei razem w końcu się udało usunąć i poszło... Ale z luci to chyba się tego nie wyklika bez tych linijek ?

560 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,107

Odp: ZTE MF286 zmiana FW

cat /sys/kernel/debug/usb/devices

pokaż. Jeżeli znajdzie modem to pokaż

uqmi -d /dev/cdc-wdm0 --get-signal-info
uqmi -d /dev/cdc-wdm0 --get-serving-system

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

561 Odpowiedź przez MiG25

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE MF286 zmiana FW

To te linie chyba to powodowały , i luci je pewnie koniecznie chciało dodać.
network.wan.auth='none'
network.wan.pdptype='ipv4v6'

562 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,107

Odp: ZTE MF286 zmiana FW

Ile razy mam powtarzać żeby nie używać luci? smile Jeżeli możesz to sprawdź ogóle czy działa - proty, usb, wireless, modem. Jak tak to za kilka dni sprawdzę u siebie i będzie dostępne normalnie wraz z następnymi buildami.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

563 Odpowiedź przez pawol

  • pawol
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-09-19
  • Posty: 669

Odp: ZTE MF286 zmiana FW

luci jest po to zeby uzywac smile

564 Odpowiedź przez MiG25 (edytowany przez MiG25 2022-01-26 21:00:32)

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE MF286 zmiana FW

Nie ma pliku /etc/config/wireless , więc nie ma wifi...
Po podłączeniu do usb pendrive wykrył go w dmesg , zamontowany , da się stworzyć plik , więc chyba ok.

Internet z modemu jest po zamianie wan.

Za każdym resetem routera windows wykrywa po lanie jakby nową sieć , od czego to zależy ? ( bo tak samo mam z MC801A)? No i na wypieku Królika tego nie miałem.

565 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,107

Odp: ZTE MF286 zmiana FW

Zrób restart, pokaz logread od początku.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

566 Odpowiedź przez MiG25

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE MF286 zmiana FW

root@OpenWrt:/# logread
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000000] Booting Linux on physical CPU 0x0
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.000000] Linux version 5.4.171 (cezary@eko.one.pl) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r15819-0011c7ad12)) #0 SMP Sun Jan 23 10:30:30 2022
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000000] CPU: div instructions available: patching division code
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000000] OF: fdt: Machine model: ZTE MF286D
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000000] Memory policy: Data cache writealloc
Sun Jan 23 11:32:23 2022 kern.err kernel: [    0.000000] OF: reserved mem: OVERLAP DETECTED!
Sun Jan 23 11:32:23 2022 kern.err kernel: [    0.000000] rsvd1@87000000 (0x87b00000--0x88000000) overlaps with smem@87e00000 (0x87e00000--0x87e80000)
Sun Jan 23 11:32:23 2022 kern.debug kernel: [    0.000000] On node 0 totalpages: 64256
Sun Jan 23 11:32:23 2022 kern.debug kernel: [    0.000000]   Normal zone: 576 pages used for memmap
Sun Jan 23 11:32:23 2022 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Sun Jan 23 11:32:23 2022 kern.debug kernel: [    0.000000]   Normal zone: 64256 pages, LIFO batch:15
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000000] percpu: Embedded 15 pages/cpu s30156 r8192 d23092 u61440
Sun Jan 23 11:32:23 2022 kern.debug kernel: [    0.000000] pcpu-alloc: s30156 r8192 d23092 u61440 alloc=15*4096
Sun Jan 23 11:32:23 2022 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 63680
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.000000] Kernel command line: ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait root=/dev/ubiblock0_1
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000000] Memory: 245580K/257024K available (5790K kernel code, 189K rwdata, 876K rodata, 1024K init, 241K bss, 11444K reserved, 0K cma-reserved, 0K highmem)
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.000000] random: get_random_bytes called from 0xc0a00bbc with crng_init=0
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt).
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000009] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000023] Switching to timer-based delay loop, resolution 20ns
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000252] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000270] pid_max: default: 32768 minimum: 301
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000470] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.000486] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.001461] CPU: Testing write buffer coherency: ok
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.002466] Setting up static identity map for 0x80300000 - 0x80300060
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.002603] rcu: Hierarchical SRCU implementation.
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.003027] smp: Bringing up secondary CPUs ...
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.006047] smp: Brought up 1 node, 4 CPUs
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.006067] SMP: Total of 4 processors activated (384.00 BogoMIPS).
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.006075] CPU: All CPU(s) started in SVC mode.
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.010970] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.011131] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.011156] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.011357] pinctrl core: initialized pinctrl subsystem
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.012345] NET: Registered protocol family 16
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.012671] DMA: preallocated 256 KiB pool for atomic coherent allocations
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.013861] cpuidle: using governor ladder
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.013908] cpuidle: using governor menu
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.034262] cryptd: max_cpu_qlen set to 1000
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.037556] usbcore: registered new interface driver usbfs
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.037621] usbcore: registered new interface driver hub
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.037677] usbcore: registered new device driver usb
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.037724] pps_core: LinuxPPS API ver. 1 registered
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.037734] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.037759] PTP clock support registered
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.039371] clocksource: Switched to clocksource arch_sys_counter
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.040224] thermal_sys: Registered thermal governor 'step_wise'
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.040522] NET: Registered protocol family 2
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.040683] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.041457] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.041499] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.041537] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.041587] TCP: Hash tables configured (established 2048 bind 2048)
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.041706] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.041744] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.041955] NET: Registered protocol family 1
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.041996] PCI: CLS 0 bytes, default 64
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.043828] workingset: timestamp_bits=14 max_order=16 bucket_order=2
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.049621] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.049635] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.099692] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.101554] gpio-export gpio-export: 1 gpio(s) exported
Sun Jan 23 11:32:23 2022 kern.err kernel: [    0.103304] bam-dma-engine 8e04000.dma: num-channels unspecified in dt
Sun Jan 23 11:32:23 2022 kern.err kernel: [    0.103323] bam-dma-engine 8e04000.dma: num-ees unspecified in dt
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.104596] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.104688] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.104772] tcsr 1953000.ess_tcsr: setting ess interface select = 0
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.104855] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.105173] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.107019] msm_serial 78af000.serial: msm_serial: detected port #0
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.107065] msm_serial 78af000.serial: uartclk = 1843200
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.107119] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 25, base_baud = 115200) is a MSM
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.107146] msm_serial: console setup on port #0
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.614548] printk: console [ttyMSM0] enabled
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.619501] msm_serial: driver initialized
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.628330] loop: module loaded
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.629921] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xf1
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.630492] nand: Micron MT29F1G08ABAEAWP
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.637085] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.641134] 12 fixed-partitions partitions found on MTD device qcom_nand.0
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.648460] Creating 12 MTD partitions on "qcom_nand.0":
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.655347] 0x000000000000-0x0000000a0000 : "fota-flag"
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.662725] 0x0000000a0000-0x000000120000 : "0:ART"
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.667343] 0x000000120000-0x0000001a0000 : "mac"
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.672325] 0x0000001a0000-0x000000260000 : "reserved2"
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.677491] 0x000000260000-0x000000660000 : "cfg-param"
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.687582] 0x000000660000-0x000000a60000 : "log"
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.694604] 0x000000a60000-0x000000b00000 : "oops"
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.696442] 0x000000b00000-0x000001000000 : "reserved3"
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.706009] random: fast init done
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.706885] 0x000001000000-0x000001800000 : "web"
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.721464] 0x000001800000-0x000003500000 : "rootfs"
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.767060] mtd: device 9 (rootfs) set to be root filesystem
Sun Jan 23 11:32:23 2022 kern.alert kernel: [    0.767678] mtdsplit: no squashfs found in "rootfs"
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.771858] 0x000003500000-0x000004e00000 : "data"
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.815833] 0x000004e00000-0x000008000000 : "fota"
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.894604] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.897881] spi-nor spi0.0: gd25q16 (2048 Kbytes)
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.900823] 8 fixed-partitions partitions found on MTD device spi0.0
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.905318] Creating 8 MTD partitions on "spi0.0":
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.911770] 0x000000000000-0x000000040000 : "0:SBL1"
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.917220] 0x000000040000-0x000000060000 : "0:MIBIB"
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.922349] 0x000000060000-0x0000000c0000 : "0:QSEE"
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.927219] 0x0000000c0000-0x0000000d0000 : "0:CDT"
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.932320] 0x0000000d0000-0x0000000e0000 : "0:DDRPARAMS"
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.936823] 0x0000000e0000-0x0000000f0000 : "0:APPSBLENV"
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.942469] 0x0000000f0000-0x0000001b0000 : "0:APPSBL"
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    0.947772] 0x0000001b0000-0x000000200000 : "0:reserved1"
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.955737] libphy: ipq4019_mdio: probed
Sun Jan 23 11:32:23 2022 kern.info kernel: [    0.982490] ESS reset ok!
Sun Jan 23 11:32:23 2022 kern.info kernel: [    1.006582] ESS reset ok!
Sun Jan 23 11:32:23 2022 kern.info kernel: [    1.426901] libphy: Fixed MDIO Bus: probed
Sun Jan 23 11:32:23 2022 kern.info kernel: [    1.432724] EDMA using MAC@ - using
Sun Jan 23 11:32:23 2022 kern.info kernel: [    1.432738] 82:c7:64:42:86:f4
Sun Jan 23 11:32:23 2022 kern.info kernel: [    1.435866] EDMA using MAC@ - using
Sun Jan 23 11:32:23 2022 kern.info kernel: [    1.435877] e2:6a:cb:89:28:ef
Sun Jan 23 11:32:23 2022 kern.info kernel: [    1.543358] i2c /dev entries driver
Sun Jan 23 11:32:23 2022 kern.info kernel: [    1.545534] sdhci: Secure Digital Host Controller Interface driver
Sun Jan 23 11:32:23 2022 kern.info kernel: [    1.545651] sdhci: Copyright(c) Pierre Ossman
Sun Jan 23 11:32:23 2022 kern.info kernel: [    1.551974] sdhci-pltfm: SDHCI platform and OF driver helper
Sun Jan 23 11:32:23 2022 kern.info kernel: [    1.559820] NET: Registered protocol family 10
Sun Jan 23 11:32:23 2022 kern.info kernel: [    1.563391] Segment Routing with IPv6
Sun Jan 23 11:32:23 2022 kern.info kernel: [    1.566392] NET: Registered protocol family 17
Sun Jan 23 11:32:23 2022 kern.info kernel: [    1.570136] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Sun Jan 23 11:32:23 2022 kern.info kernel: [    1.574398] 8021q: 802.1Q VLAN Support v1.8
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    1.587616] Registering SWP/SWPB emulation handler
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    1.600743] ubi0: attaching mtd9
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    1.958182] ubi0: scanning is finished
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    1.973245] ubi0: attached mtd9 (name "rootfs", size 29 MiB)
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    1.973320] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    1.978012] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    1.984809] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    1.991617] ubi0: good PEBs: 232, bad PEBs: 0, corrupted PEBs: 0
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    1.998325] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    2.004674] ubi0: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 0
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    2.011717] ubi0: available PEBs: 0, total reserved PEBs: 232, PEBs reserved for bad PEB handling: 20
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    2.019995] ubi0: background thread "ubi_bgt0d" started, PID 103
Sun Jan 23 11:32:23 2022 kern.info kernel: [    2.021416] block ubiblock0_1: created from ubi0:1(rootfs)
Sun Jan 23 11:32:23 2022 kern.info kernel: [    2.035341] hctosys: unable to open rtc device (rtc0)
Sun Jan 23 11:32:23 2022 kern.info kernel: [    2.047769] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
Sun Jan 23 11:32:23 2022 kern.info kernel: [    2.049451] Freeing unused kernel memory: 1024K
Sun Jan 23 11:32:23 2022 kern.info kernel: [    2.084227] Run /sbin/init as init process
Sun Jan 23 11:32:23 2022 user.info kernel: [    3.197023] init: Console is alive
Sun Jan 23 11:32:23 2022 user.info kernel: [    3.197259] init: - watchdog -
Sun Jan 23 11:32:23 2022 user.info kernel: [    5.686376] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Sun Jan 23 11:32:23 2022 kern.info kernel: [    5.758043] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    5.761724] SCSI subsystem initialized
Sun Jan 23 11:32:23 2022 kern.info kernel: [    5.765657] ehci-fsl: Freescale EHCI Host controller driver
Sun Jan 23 11:32:23 2022 kern.info kernel: [    5.768030] ehci-platform: EHCI generic platform driver
Sun Jan 23 11:32:23 2022 kern.err kernel: [    5.778544] dwc3-qcom 8af8800.usb3: IRQ hs_phy_irq not found
Sun Jan 23 11:32:23 2022 kern.err kernel: [    5.778582] dwc3-qcom 8af8800.usb3: IRQ dp_hs_phy_irq not found
Sun Jan 23 11:32:23 2022 kern.err kernel: [    5.783827] dwc3-qcom 8af8800.usb3: IRQ dm_hs_phy_irq not found
Sun Jan 23 11:32:23 2022 kern.err kernel: [    5.789459] dwc3-qcom 8af8800.usb3: IRQ ss_phy_irq not found
Sun Jan 23 11:32:23 2022 kern.err kernel: [    5.797067] dwc3-qcom 60f8800.usb2: IRQ hs_phy_irq not found
Sun Jan 23 11:32:23 2022 kern.err kernel: [    5.801274] dwc3-qcom 60f8800.usb2: IRQ dp_hs_phy_irq not found
Sun Jan 23 11:32:23 2022 kern.err kernel: [    5.806874] dwc3-qcom 60f8800.usb2: IRQ dm_hs_phy_irq not found
Sun Jan 23 11:32:23 2022 kern.err kernel: [    5.812551] dwc3-qcom 60f8800.usb2: IRQ ss_phy_irq not found
Sun Jan 23 11:32:23 2022 kern.err kernel: [    5.833507] dwc3 8a00000.dwc3: Failed to get clk 'ref': -2
Sun Jan 23 11:32:23 2022 kern.err kernel: [    5.954519] dwc3 6000000.dwc3: Failed to get clk 'ref': -2
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.059773] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.059938] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.064689] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x0000000002010010
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.071847] xhci-hcd xhci-hcd.0.auto: irq 97, io mem 0x08a00000
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.082011] hub 1-0:1.0: USB hub found
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.087057] hub 1-0:1.0: 1 port detected
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.091209] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.094920] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.100268] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.110420] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.114930] hub 2-0:1.0: USB hub found
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.122729] hub 2-0:1.0: 1 port detected
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.126667] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.130300] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.135753] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f665 hci version 0x100 quirks 0x0000000002010010
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.143187] xhci-hcd xhci-hcd.1.auto: irq 98, io mem 0x06000000
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.153349] hub 3-0:1.0: USB hub found
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.158407] hub 3-0:1.0: 1 port detected
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.162551] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.166275] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.171621] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.183588] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.186263] hub 4-0:1.0: USB hub found
Sun Jan 23 11:32:23 2022 kern.err kernel: [    6.194085] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.201132] usbcore: registered new interface driver usb-storage
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.205877] usbcore: registered new interface driver uas
Sun Jan 23 11:32:23 2022 user.info kernel: [    6.211057] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Sun Jan 23 11:32:23 2022 user.info kernel: [    6.220057] init: - preinit -
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.449465] usb 3-1: new high-speed USB device number 2 using xhci-hcd
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.633025] usb-storage 3-1:1.0: USB Mass Storage device detected
Sun Jan 23 11:32:23 2022 kern.info kernel: [    6.633520] scsi host0: usb-storage 3-1:1.0
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    6.702979] random: procd: uninitialized urandom read (4 bytes read)
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    7.020105] random: jshn: uninitialized urandom read (4 bytes read)
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    7.061297] random: jshn: uninitialized urandom read (4 bytes read)
Sun Jan 23 11:32:23 2022 kern.info kernel: [    7.613917] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    7.690540] scsi 0:0:0:0: Direct-Access              USB Flash Memory 1.00 PQ: 0 ANSI: 2
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    7.693361] sd 0:0:0:0: [sda] 7823296 512-byte logical blocks: (4.01 GB/3.73 GiB)
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    7.698496] sd 0:0:0:0: [sda] Write Protect is off
Sun Jan 23 11:32:23 2022 kern.debug kernel: [    7.705234] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
Sun Jan 23 11:32:23 2022 kern.err kernel: [    7.705899] sd 0:0:0:0: [sda] No Caching mode page found
Sun Jan 23 11:32:23 2022 kern.err kernel: [    7.709909] sd 0:0:0:0: [sda] Assuming drive cache: write through
Sun Jan 23 11:32:23 2022 kern.info kernel: [    7.717919]  sda: sda1
Sun Jan 23 11:32:23 2022 kern.notice kernel: [    7.722703] sd 0:0:0:0: [sda] Attached SCSI removable disk
Sun Jan 23 11:32:23 2022 kern.info kernel: [    8.930827] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
Sun Jan 23 11:32:23 2022 user.info kernel: [   12.014134] mount_root: loading kmods from internal overlay
Sun Jan 23 11:32:23 2022 user.info kernel: [   12.044613] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Sun Jan 23 11:32:23 2022 user.info kernel: [   12.046088] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Sun Jan 23 11:32:23 2022 kern.notice kernel: [   12.494690] random: crng init done
Sun Jan 23 11:32:23 2022 kern.notice kernel: [   12.494760] random: 5 urandom warning(s) missed due to ratelimiting
Sun Jan 23 11:32:23 2022 kern.notice kernel: [   13.944020] UBIFS (ubi0:2): Mounting in unauthenticated mode
Sun Jan 23 11:32:23 2022 kern.notice kernel: [   13.944326] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 213
Sun Jan 23 11:32:23 2022 kern.notice kernel: [   14.027842] UBIFS (ubi0:2): recovery needed
Sun Jan 23 11:32:23 2022 kern.notice kernel: [   14.214958] UBIFS (ubi0:2): recovery completed
Sun Jan 23 11:32:23 2022 kern.notice kernel: [   14.215286] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
Sun Jan 23 11:32:23 2022 kern.notice kernel: [   14.218350] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Sun Jan 23 11:32:23 2022 kern.notice kernel: [   14.226410] UBIFS (ubi0:2): FS size: 15491072 bytes (14 MiB, 122 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
Sun Jan 23 11:32:23 2022 kern.notice kernel: [   14.236216] UBIFS (ubi0:2): reserved for root: 731681 bytes (714 KiB)
Sun Jan 23 11:32:23 2022 kern.notice kernel: [   14.246439] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 10B4BB35-C4F2-4CC3-80E8-6C00A54CBB4C, small LPT model
Sun Jan 23 11:32:23 2022 user.info kernel: [   14.255614] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Sun Jan 23 11:32:23 2022 user.info kernel: [   14.275028] block: extroot: not configured
Sun Jan 23 11:32:23 2022 kern.notice kernel: [   14.275327] UBIFS (ubi0:2): un-mount UBI device 0
Sun Jan 23 11:32:23 2022 kern.notice kernel: [   14.278065] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" stops
Sun Jan 23 11:32:23 2022 kern.notice kernel: [   14.288167] UBIFS (ubi0:2): Mounting in unauthenticated mode
Sun Jan 23 11:32:23 2022 kern.notice kernel: [   14.289140] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 214
Sun Jan 23 11:32:23 2022 kern.notice kernel: [   14.489582] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
Sun Jan 23 11:32:23 2022 kern.notice kernel: [   14.489670] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Sun Jan 23 11:32:23 2022 kern.notice kernel: [   14.496458] UBIFS (ubi0:2): FS size: 15491072 bytes (14 MiB, 122 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
Sun Jan 23 11:32:23 2022 kern.notice kernel: [   14.506453] UBIFS (ubi0:2): reserved for root: 731681 bytes (714 KiB)
Sun Jan 23 11:32:23 2022 kern.notice kernel: [   14.516656] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 10B4BB35-C4F2-4CC3-80E8-6C00A54CBB4C, small LPT model
Sun Jan 23 11:32:23 2022 user.info kernel: [   16.099231] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Sun Jan 23 11:32:23 2022 user.info kernel: [   16.109109] block: extroot: not configured
Sun Jan 23 11:32:23 2022 user.info kernel: [   16.112338] mount_root: switching to ubifs overlay
Sun Jan 23 11:32:23 2022 user.warn kernel: [   16.125580] urandom-seed: Seeding with /etc/urandom.seed
Sun Jan 23 11:32:23 2022 user.info kernel: [   16.252775] procd: - early -
Sun Jan 23 11:32:23 2022 user.info kernel: [   16.252912] procd: - watchdog -
Sun Jan 23 11:32:23 2022 user.info kernel: [   16.882516] procd: - watchdog -
Sun Jan 23 11:32:23 2022 user.info kernel: [   16.884909] procd: - ubus -
Sun Jan 23 11:32:23 2022 user.info kernel: [   17.038899] procd: - init -
Sun Jan 23 11:32:23 2022 user.info kernel: [   17.685814] urngd: v1.0.2 started.
Sun Jan 23 11:32:23 2022 user.info kernel: [   17.702607] kmodloader: loading kernel modules from /etc/modules.d/*
Sun Jan 23 11:32:23 2022 kern.info kernel: [   17.732539] tun: Universal TUN/TAP device driver, 1.6
Sun Jan 23 11:32:23 2022 kern.info kernel: [   17.769937] fuse: init (API version 7.31)
Sun Jan 23 11:32:23 2022 kern.info kernel: [   17.775388] usbcore: registered new interface driver cdc_acm
Sun Jan 23 11:32:23 2022 kern.info kernel: [   17.775421] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Sun Jan 23 11:32:23 2022 kern.info kernel: [   17.781319] usbcore: registered new interface driver cdc_wdm
Sun Jan 23 11:32:23 2022 kern.info kernel: [   17.790686] Loading modules backported from Linux version v5.10.85-0-ge4f2aee6612e
Sun Jan 23 11:32:23 2022 kern.info kernel: [   17.793752] Backport generated by backports.git v5.10.85-1-0-gf988973f
Sun Jan 23 11:32:23 2022 kern.info kernel: [   17.816666] usbcore: registered new interface driver usblp
Sun Jan 23 11:32:23 2022 kern.info kernel: [   17.822042] usbcore: registered new interface driver usbserial_generic
Sun Jan 23 11:32:23 2022 kern.info kernel: [   17.822149] usbserial: USB Serial support registered for generic
Sun Jan 23 11:32:23 2022 kern.info kernel: [   17.833281] xt_time: kernel timezone is -0000
Sun Jan 23 11:32:23 2022 kern.info kernel: [   17.835123] usbcore: registered new interface driver cdc_ether
Sun Jan 23 11:32:23 2022 kern.info kernel: [   17.839838] usbcore: registered new interface driver cdc_ncm
Sun Jan 23 11:32:23 2022 kern.info kernel: [   17.875717] usbcore: registered new interface driver huawei_cdc_ncm
Sun Jan 23 11:32:23 2022 kern.info kernel: [   17.972189] PPP generic driver version 2.4.2
Sun Jan 23 11:32:23 2022 kern.info kernel: [   17.973396] NET: Registered protocol family 24
Sun Jan 23 11:32:23 2022 kern.info kernel: [   17.980942] qmi_wwan 2-1:1.5: cdc-wdm0: USB WDM device
Sun Jan 23 11:32:23 2022 kern.info kernel: [   17.983219] qmi_wwan 2-1:1.5 wwan0: register 'qmi_wwan' at usb-xhci-hcd.0.auto-1, WWAN/QMI device, 8e:3b:da:46:21:c1
Sun Jan 23 11:32:23 2022 kern.info kernel: [   17.985571] usbcore: registered new interface driver qmi_wwan
Sun Jan 23 11:32:23 2022 kern.info kernel: [   18.004552] rndis_host 2-1:1.0 usb0: register 'rndis_host' at usb-xhci-hcd.0.auto-1, RNDIS device, 42:1c:d6:14:d5:ce
Sun Jan 23 11:32:23 2022 kern.info kernel: [   18.005052] usbcore: registered new interface driver rndis_host
Sun Jan 23 11:32:23 2022 kern.info kernel: [   18.016804] usbcore: registered new interface driver sierra
Sun Jan 23 11:32:23 2022 kern.info kernel: [   18.020075] usbserial: USB Serial support registered for Sierra USB modem
Sun Jan 23 11:32:23 2022 kern.info kernel: [   18.030148] usbcore: registered new interface driver sierra_net
Sun Jan 23 11:32:23 2022 kern.info kernel: [   18.045645] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
Sun Jan 23 11:32:23 2022 kern.info kernel: [   18.045710] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
Sun Jan 23 11:32:23 2022 kern.info kernel: [   24.375380] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
Sun Jan 23 11:32:23 2022 kern.info kernel: [   24.375429] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
Sun Jan 23 11:32:23 2022 kern.info kernel: [   24.386863] ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 6b2b5c5b
Sun Jan 23 11:32:23 2022 kern.err kernel: [   24.416027] ath10k_ahb a000000.wifi: failed to fetch board data for bus=ahb,vendor=0000,device=0000,subsystem-vendor=0000,subsystem-device=0000,variant=zte,mf286d from ath10k/QCA4019/hw1.0/board-2.bin
Sun Jan 23 11:32:23 2022 kern.err kernel: [   24.476234] ath10k_ahb a000000.wifi: failed to fetch board-2.bin or board.bin from ath10k/QCA4019/hw1.0
Sun Jan 23 11:32:23 2022 kern.err kernel: [   24.476314] ath10k_ahb a000000.wifi: failed to fetch board file: -12
Sun Jan 23 11:32:23 2022 kern.err kernel: [   24.484798] ath10k_ahb a000000.wifi: could not probe fw (-12)
Sun Jan 23 11:32:23 2022 kern.info kernel: [   25.285201] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
Sun Jan 23 11:32:23 2022 kern.info kernel: [   25.285282] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
Sun Jan 23 11:32:23 2022 kern.info kernel: [   25.298045] ath10k_ahb a800000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 6b2b5c5b
Sun Jan 23 11:32:23 2022 kern.err kernel: [   25.325770] ath10k_ahb a800000.wifi: failed to fetch board data for bus=ahb,vendor=0000,device=0000,subsystem-vendor=0000,subsystem-device=0000,variant=zte,mf286d from ath10k/QCA4019/hw1.0/board-2.bin
Sun Jan 23 11:32:23 2022 kern.err kernel: [   25.381288] ath10k_ahb a800000.wifi: failed to fetch board-2.bin or board.bin from ath10k/QCA4019/hw1.0
Sun Jan 23 11:32:23 2022 kern.err kernel: [   25.381347] ath10k_ahb a800000.wifi: failed to fetch board file: -12
Sun Jan 23 11:32:23 2022 kern.err kernel: [   25.389799] ath10k_ahb a800000.wifi: could not probe fw (-12)
Sun Jan 23 11:32:23 2022 kern.info kernel: [   25.400155] usbcore: registered new interface driver cdc_mbim
Sun Jan 23 11:32:23 2022 kern.info kernel: [   25.404583] usbcore: registered new interface driver option
Sun Jan 23 11:32:23 2022 kern.info kernel: [   25.407587] usbserial: USB Serial support registered for GSM modem (1-port)
Sun Jan 23 11:32:23 2022 kern.info kernel: [   25.413964] option 2-1:1.2: GSM modem (1-port) converter detected
Sun Jan 23 11:32:23 2022 kern.info kernel: [   25.420232] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
Sun Jan 23 11:32:23 2022 kern.info kernel: [   25.426539] option 2-1:1.3: GSM modem (1-port) converter detected
Sun Jan 23 11:32:23 2022 kern.info kernel: [   25.433348] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
Sun Jan 23 11:32:23 2022 kern.info kernel: [   25.439482] option 2-1:1.4: GSM modem (1-port) converter detected
Sun Jan 23 11:32:23 2022 kern.info kernel: [   25.446093] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
Sun Jan 23 11:32:23 2022 kern.info kernel: [   25.455495] usbcore: registered new interface driver qcserial
Sun Jan 23 11:32:23 2022 kern.info kernel: [   25.458643] usbserial: USB Serial support registered for Qualcomm USB modem
Sun Jan 23 11:32:23 2022 user.info kernel: [   25.467998] kmodloader: done loading kernel modules from /etc/modules.d/*
Sun Jan 23 11:32:23 2022 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Sun Jan 23 11:32:23 2022 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Sun Jan 23 11:32:23 2022 user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Sun Jan 23 11:32:24 2022 daemon.info dnsmasq[1622]: Connected to system UBus
Sun Jan 23 11:32:24 2022 daemon.info dnsmasq[1622]: started, version 2.85 cachesize 150
Sun Jan 23 11:32:24 2022 daemon.info dnsmasq[1622]: DNS service limited to local subnets
Sun Jan 23 11:32:24 2022 daemon.info dnsmasq[1622]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Sun Jan 23 11:32:24 2022 daemon.info dnsmasq[1622]: UBus support enabled: connected to system bus
Sun Jan 23 11:32:24 2022 daemon.info dnsmasq[1622]: using only locally-known addresses for domain test
Sun Jan 23 11:32:24 2022 daemon.info dnsmasq[1622]: using only locally-known addresses for domain onion
Sun Jan 23 11:32:24 2022 daemon.info dnsmasq[1622]: using only locally-known addresses for domain localhost
Sun Jan 23 11:32:24 2022 daemon.info dnsmasq[1622]: using only locally-known addresses for domain local
Sun Jan 23 11:32:24 2022 daemon.info dnsmasq[1622]: using only locally-known addresses for domain invalid
Sun Jan 23 11:32:24 2022 daemon.info dnsmasq[1622]: using only locally-known addresses for domain bind
Sun Jan 23 11:32:24 2022 daemon.info dnsmasq[1622]: using only locally-known addresses for domain lan
Sun Jan 23 11:32:24 2022 daemon.warn dnsmasq[1622]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Sun Jan 23 11:32:24 2022 daemon.info dnsmasq[1622]: read /etc/hosts - 4 addresses
Sun Jan 23 11:32:24 2022 daemon.info dnsmasq[1622]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Sun Jan 23 11:32:24 2022 authpriv.info dropbear[1688]: Not backgrounding
Sun Jan 23 11:32:25 2022 daemon.notice wpa_supplicant[1787]: Successfully initialized wpa_supplicant
Sun Jan 23 11:32:25 2022 user.notice : Added device handler type: bonding
Sun Jan 23 11:32:25 2022 user.notice : Added device handler type: 8021ad
Sun Jan 23 11:32:25 2022 user.notice : Added device handler type: 8021q
Sun Jan 23 11:32:25 2022 user.notice : Added device handler type: macvlan
Sun Jan 23 11:32:25 2022 user.notice : Added device handler type: veth
Sun Jan 23 11:32:25 2022 user.notice : Added device handler type: bridge
Sun Jan 23 11:32:25 2022 user.notice : Added device handler type: Network device
Sun Jan 23 11:32:25 2022 user.notice : Added device handler type: tunnel
Sun Jan 23 11:32:27 2022 kern.info kernel: [   31.814180] br-lan: port 1(eth0) entered blocking state
Sun Jan 23 11:32:27 2022 kern.info kernel: [   31.814220] br-lan: port 1(eth0) entered disabled state
Sun Jan 23 11:32:27 2022 kern.info kernel: [   31.818603] device eth0 entered promiscuous mode
Sun Jan 23 11:32:27 2022 daemon.notice netifd: Interface 'lan' is enabled
Sun Jan 23 11:32:27 2022 daemon.notice netifd: Interface 'lan' is setting up now
Sun Jan 23 11:32:27 2022 daemon.notice netifd: Interface 'lan' is now up
Sun Jan 23 11:32:27 2022 daemon.notice netifd: Interface 'loopback' is enabled
Sun Jan 23 11:32:27 2022 daemon.notice netifd: Interface 'loopback' is setting up now
Sun Jan 23 11:32:27 2022 daemon.notice netifd: Interface 'loopback' is now up
Sun Jan 23 11:32:27 2022 daemon.notice netifd: Interface 'wan' is setting up now
Sun Jan 23 11:32:27 2022 daemon.notice netifd: Network device 'eth0' link is up
Sun Jan 23 11:32:27 2022 daemon.notice netifd: Network device 'lo' link is up
Sun Jan 23 11:32:27 2022 daemon.notice netifd: Interface 'loopback' has link connectivity
Sun Jan 23 11:32:27 2022 daemon.notice netifd: wan (2021): Waiting for SIM initialization
Sun Jan 23 11:32:27 2022 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Sun Jan 23 11:32:27 2022 user.info adblock-4.1.3[2040]: backup directory '/tmp/adblock-Backup' created
Sun Jan 23 11:32:28 2022 daemon.info dnsmasq[1622]: exiting on receipt of SIGTERM
Sun Jan 23 11:32:28 2022 kern.info kernel: [   32.897470] br-lan: port 1(eth0) entered blocking state
Sun Jan 23 11:32:28 2022 kern.info kernel: [   32.897530] br-lan: port 1(eth0) entered forwarding state
Sun Jan 23 11:32:28 2022 daemon.notice netifd: bridge 'br-lan' link is up
Sun Jan 23 11:32:28 2022 daemon.notice netifd: Interface 'lan' has link connectivity
Sun Jan 23 11:32:28 2022 kern.info kernel: [   32.902305] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Sun Jan 23 11:32:28 2022 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Sun Jan 23 11:32:28 2022 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Sun Jan 23 11:32:28 2022 user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Sun Jan 23 11:32:29 2022 daemon.err odhcpd[2137]: Failed to send to ff02::1%lan@br-lan (Address not available)
Sun Jan 23 11:32:30 2022 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Sun Jan 23 11:32:30 2022 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Sun Jan 23 11:32:30 2022 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Sun Jan 23 11:32:30 2022 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Sun Jan 23 11:32:30 2022 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Sun Jan 23 11:32:30 2022 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Sun Jan 23 11:32:30 2022 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Sun Jan 23 11:32:30 2022 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Sun Jan 23 11:32:30 2022 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Sun Jan 23 11:32:30 2022 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Sun Jan 23 11:32:31 2022 daemon.notice netifd: wan (2021): Device does not support 802.3 mode. Informing driver of raw-ip only for wwan0 ..
Sun Jan 23 11:32:31 2022 daemon.notice netifd: wan (2021): Waiting for network registration
Sun Jan 23 11:32:31 2022 user.notice vpnbypass [2913]: service monitoring interfaces:
Sun Jan 23 11:32:32 2022 daemon.notice ksmbd: Starting Ksmbd userspace service.
Sun Jan 23 11:32:32 2022 daemon.info dnsmasq[3130]: Connected to system UBus
Sun Jan 23 11:32:32 2022 daemon.info dnsmasq[3130]: started, version 2.85 cachesize 150
Sun Jan 23 11:32:32 2022 daemon.info dnsmasq[3130]: DNS service limited to local subnets
Sun Jan 23 11:32:32 2022 daemon.info dnsmasq[3130]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Sun Jan 23 11:32:32 2022 daemon.info dnsmasq[3130]: UBus support enabled: connected to system bus
Sun Jan 23 11:32:32 2022 daemon.info dnsmasq-dhcp[3130]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Sun Jan 23 11:32:32 2022 daemon.info dnsmasq[3130]: using only locally-known addresses for domain test
Sun Jan 23 11:32:32 2022 daemon.info dnsmasq[3130]: using only locally-known addresses for domain onion
Sun Jan 23 11:32:32 2022 daemon.info dnsmasq[3130]: using only locally-known addresses for domain localhost
Sun Jan 23 11:32:32 2022 daemon.info dnsmasq[3130]: using only locally-known addresses for domain local
Sun Jan 23 11:32:32 2022 daemon.info dnsmasq[3130]: using only locally-known addresses for domain invalid
Sun Jan 23 11:32:32 2022 daemon.info dnsmasq[3130]: using only locally-known addresses for domain bind
Sun Jan 23 11:32:32 2022 daemon.info dnsmasq[3130]: using only locally-known addresses for domain lan
Sun Jan 23 11:32:32 2022 daemon.warn dnsmasq[3130]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Sun Jan 23 11:32:32 2022 daemon.info dnsmasq[3130]: read /etc/hosts - 4 addresses
Sun Jan 23 11:32:32 2022 daemon.info dnsmasq[3130]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Sun Jan 23 11:32:32 2022 daemon.info dnsmasq-dhcp[3130]: read /etc/ethers - 0 addresses
Sun Jan 23 11:32:32 2022 daemon.notice netifd: wan (2021): Starting network wan
Sun Jan 23 11:32:32 2022 daemon.notice netifd: wan (2021): Setting up wwan0
Sun Jan 23 11:32:32 2022 daemon.notice netifd: Interface 'wan' is now up
Sun Jan 23 11:32:32 2022 daemon.notice netifd: Network device 'wwan0' link is up
Sun Jan 23 11:32:33 2022 daemon.notice netifd: Network alias 'wwan0' link is up
Sun Jan 23 11:32:33 2022 daemon.notice netifd: Interface 'wan_4' is enabled
Sun Jan 23 11:32:33 2022 daemon.notice netifd: Interface 'wan_4' has link connectivity
Sun Jan 23 11:32:33 2022 daemon.notice netifd: Interface 'wan_4' is setting up now
Sun Jan 23 11:32:33 2022 user.notice firewall: Reloading firewall due to ifup of wan (wwan0)
Sun Jan 23 11:32:33 2022 daemon.notice netifd: wan_4 (3481): udhcpc: started, v1.33.2
Sun Jan 23 11:32:33 2022 daemon.info dnsmasq[3130]: exiting on receipt of SIGTERM
Sun Jan 23 11:32:33 2022 daemon.notice netifd: wan_4 (3481): udhcpc: sending discover
Sun Jan 23 11:32:33 2022 daemon.info dnsmasq[3574]: Connected to system UBus
Sun Jan 23 11:32:33 2022 daemon.info dnsmasq[3574]: started, version 2.85 cachesize 150
Sun Jan 23 11:32:33 2022 daemon.info dnsmasq[3574]: DNS service limited to local subnets
Sun Jan 23 11:32:33 2022 daemon.info dnsmasq[3574]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Sun Jan 23 11:32:33 2022 daemon.info dnsmasq[3574]: UBus support enabled: connected to system bus
Sun Jan 23 11:32:33 2022 daemon.info dnsmasq-dhcp[3574]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Sun Jan 23 11:32:33 2022 daemon.info dnsmasq[3574]: using only locally-known addresses for domain test
Sun Jan 23 11:32:33 2022 daemon.info dnsmasq[3574]: using only locally-known addresses for domain onion
Sun Jan 23 11:32:33 2022 daemon.info dnsmasq[3574]: using only locally-known addresses for domain localhost
Sun Jan 23 11:32:33 2022 daemon.info dnsmasq[3574]: using only locally-known addresses for domain local
Sun Jan 23 11:32:33 2022 daemon.info dnsmasq[3574]: using only locally-known addresses for domain invalid
Sun Jan 23 11:32:33 2022 daemon.info dnsmasq[3574]: using only locally-known addresses for domain bind
Sun Jan 23 11:32:33 2022 daemon.info dnsmasq[3574]: using only locally-known addresses for domain lan
Sun Jan 23 11:32:33 2022 daemon.warn dnsmasq[3574]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Sun Jan 23 11:32:33 2022 daemon.info dnsmasq[3574]: read /etc/hosts - 4 addresses
Sun Jan 23 11:32:33 2022 daemon.info dnsmasq[3574]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Sun Jan 23 11:32:33 2022 daemon.info dnsmasq-dhcp[3574]: read /etc/ethers - 0 addresses
Sun Jan 23 11:32:33 2022 daemon.info dnsmasq[3574]: read /etc/hosts - 4 addresses
Sun Jan 23 11:32:33 2022 daemon.info dnsmasq[3574]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Sun Jan 23 11:32:33 2022 daemon.info dnsmasq-dhcp[3574]: read /etc/ethers - 0 addresses
Sun Jan 23 11:32:33 2022 user.notice ddns-scripts[3616]: myddns_ipv4: PID '3616' started at 2022-01-23 11:32
Sun Jan 23 11:32:34 2022 user.warn ddns-scripts[3616]: myddns_ipv4: Service section disabled! - TERMINATE
Sun Jan 23 11:32:34 2022 user.warn ddns-scripts[3616]: myddns_ipv4: PID '3616' exit WITH ERROR '1' at 2022-01-23 11:32
Sun Jan 23 11:32:35 2022 daemon.notice netifd: wan_4 (3481): udhcpc: sending select for 100.77.148.251
Sun Jan 23 11:32:35 2022 daemon.notice netifd: wan_4 (3481): udhcpc: lease of 100.77.148.251 obtained, lease time 7200
Sun Jan 23 11:32:35 2022 daemon.notice netifd: Interface 'wan_4' is now up
Sun Jan 23 11:32:35 2022 daemon.info dnsmasq[3574]: reading /tmp/resolv.conf.d/resolv.conf.auto
Sun Jan 23 11:32:35 2022 daemon.info dnsmasq[3574]: using only locally-known addresses for domain test
Sun Jan 23 11:32:35 2022 daemon.info dnsmasq[3574]: using only locally-known addresses for domain onion
Sun Jan 23 11:32:35 2022 daemon.info dnsmasq[3574]: using only locally-known addresses for domain localhost
Sun Jan 23 11:32:35 2022 daemon.info dnsmasq[3574]: using only locally-known addresses for domain local
Sun Jan 23 11:32:35 2022 daemon.info dnsmasq[3574]: using only locally-known addresses for domain invalid
Sun Jan 23 11:32:35 2022 daemon.info dnsmasq[3574]: using only locally-known addresses for domain bind
Sun Jan 23 11:32:35 2022 daemon.info dnsmasq[3574]: using only locally-known addresses for domain lan
Sun Jan 23 11:32:35 2022 daemon.info dnsmasq[3574]: using nameserver 213.158.199.1#53
Sun Jan 23 11:32:35 2022 daemon.info dnsmasq[3574]: using nameserver 213.158.199.5#53
Sun Jan 23 11:32:36 2022 user.notice firewall: Reloading firewall due to ifup of wan_4 (wwan0)
Sun Jan 23 11:32:37 2022 user.info adblock-4.1.3[2040]: adblock is currently disabled, please set the config option 'adb_enabled' to '1' to use this service
Sun Jan 23 11:32:38 2022 daemon.info procd: - init complete -
root@OpenWrt:/#

567 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,107

Odp: ZTE MF286 zmiana FW

Na obrazie Królika Ci działało wifi? Bo próbuje pobrać coś innego niż jest w pliku

Sun Jan 23 11:32:23 2022 kern.err kernel: [   24.416027] ath10k_ahb a000000.wifi: failed to fetch board data for bus=ahb,vendor=0000,device=0000,subsystem-vendor=0000,subsystem-device=0000,variant=zte,mf286d from ath10k/QCA4019/hw1.0/board-2.bin
Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

568 Odpowiedź przez MiG25

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE MF286 zmiana FW

Tak , działało wifi na obrazie Królika , włączało się przciskiem. Nie testowałem u niego szyfrowań ,ale na pewno podłączyłem się na chwilę do niezaszyfrowanej sieci.

569 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,107

Odp: ZTE MF286 zmiana FW

@Królik: a nie ma ekstrakcji danych z 0:ART?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

570 Odpowiedź przez Królik

  • Skąd: Warszawa
  • Zarejestrowany: 2015-07-10
  • Posty: 1,106

Odp: ZTE MF286 zmiana FW

Cezary napisał/a:

@Królik: a nie ma ekstrakcji danych z 0:ART?

Bazujesz na tym?
https://github.com/openwrt/openwrt/comm … 17fea66143

Czy na tym?
https://github.com/openwrt/openwrt/comm … 7ab91d7882

W jednym jest robione nvmem a w drugim skryptem.

Mam i używam: Fujitsu Futro S720, Netgear R6220, Unielec U7621-06, TP-Linki 1043 V1, V2, Linksysy EA7500v2, AeroHive AP350, Linksys EA8500, ZTE MF286d.
Mam: D-Linki DWR-921, DWR-118, DWR-116, TP-Link WDR-4900 v1, Checkpoint L-50, Linksysy 1900ACS, LB-Link BL-W1200,

Królik's Strona

571 Odpowiedź przez MiG25

  • MiG25
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-07-23
  • Posty: 3,801

Odp: ZTE MF286 zmiana FW

Czy /overlay możecie przypisać do mtd11 ? "fota" i tak jest (albo może być bezkarnie)  kasowana na oryginale ,i można ją bezkarnie użyć i jest największa.

572 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,107

Odp: ZTE MF286 zmiana FW

Królik napisał/a:
Cezary napisał/a:

@Królik: a nie ma ekstrakcji danych z 0:ART?

Bazujesz na tym?
https://github.com/openwrt/openwrt/comm … 17fea66143

Czy na tym?
https://github.com/openwrt/openwrt/comm … 7ab91d7882

W jednym jest robione nvmem a w drugim skryptem.

No tak właśnie wiedziałem że czegoś brakuje smile

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

573 Odpowiedź przez Królik

  • Skąd: Warszawa
  • Zarejestrowany: 2015-07-10
  • Posty: 1,106

Odp: ZTE MF286 zmiana FW

MiG25 napisał/a:

Czy /overlay możecie przypisać do mtd11 ? "fota" i tak jest (albo może być bezkarnie)  kasowana na oryginale ,i można ją bezkarnie użyć i jest największa.

No właśnie wpadłem na to, ale najpierw trzeba ustalić jak mocno trzeba openwrt zmodzić i czy coredevowie to przyjmą.

Mam i używam: Fujitsu Futro S720, Netgear R6220, Unielec U7621-06, TP-Linki 1043 V1, V2, Linksysy EA7500v2, AeroHive AP350, Linksys EA8500, ZTE MF286d.
Mam: D-Linki DWR-921, DWR-118, DWR-116, TP-Link WDR-4900 v1, Checkpoint L-50, Linksysy 1900ACS, LB-Link BL-W1200,

Królik's Strona

574 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,107

Odp: ZTE MF286 zmiana FW

@MiG25 pobierz sobie obrazy jeszcze raz i wgraj bez zachowania konfiguracji.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

575 Odpowiedź przez smereka (edytowany przez smereka 2022-01-26 22:12:43)

  • Zarejestrowany: 2014-07-09
  • Posty: 2,443

Odp: ZTE MF286 zmiana FW

Cezary na tym modemie od strony złącz antenowych są 3 blisko siebie pinouty oprócz tego boot pinu który jest po drugiej stronie modemu blisko procka. Jeden to na pewno GND, drugi jak dobrze pamiętam ma różnicę potencjału względem GND około 0,5V a z ten 3 ma różnice potencjału 1,8V.
1. Czy to może być serial modemu i piny GND, Rx,Tx
2. A jeśli tak czy czy jeśli zwierałem te Rx i Tx do GND to czy mogłem ten serial uszkodzić? Jeszcze nie prbówałem się łączyć bo router został w robocie ale z ciekawości pytam.