• Zarejestrowany: 2015-09-09
  • Posty: 155

Temat: Padły oba radia wndr4300

Witam. Po restarcie nie ma wifi, restarty radia, routera nie pomagają.
Log
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    0.000000] Linux version 4.14.216 (cezary@eko.one.pl) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11261-3f5fecfd33)) #0 Thu Jan 21 14:36:18 2021
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000] SoC: Atheros AR9344 rev 2
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000] Determined physical RAM map:
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000]  memory: 08000000 @ 00000000 (usable)
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Tue Oct 19 07:06:52 2021 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Tue Oct 19 07:06:52 2021 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000] Zone ranges:
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000] Movable zone start for each node
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000] Early memory node ranges
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
Tue Oct 19 07:06:52 2021 kern.debug kernel: [    0.000000] On node 0 totalpages: 32768
Tue Oct 19 07:06:52 2021 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 80538bc0, node_mem_map 81000020
Tue Oct 19 07:06:52 2021 kern.debug kernel: [    0.000000]   Normal zone: 256 pages used for memmap
Tue Oct 19 07:06:52 2021 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Tue Oct 19 07:06:52 2021 kern.debug kernel: [    0.000000]   Normal zone: 32768 pages, LIFO batch:7
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    0.000000] random: get_random_bytes called from 0x8053c740 with crng_init=0
Tue Oct 19 07:06:52 2021 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Tue Oct 19 07:06:52 2021 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    0.000000] Kernel command line:  board=WNDR4300 console=ttyS0,115200 mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata)ro,512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),121856k(ubi),123904k@0x6c0000(firmware),256k(caldata_backup),-(reserved) rootfstype=squashfs noinitrd
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000] Memory: 124100K/131072K available (4263K kernel code, 176K rwdata, 528K rodata, 208K init, 213K bss, 6972K reserved, 0K cma-reserved)
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000] NR_IRQS: 51
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000] Clocks: CPU:560.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:40.000MHz
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.000010] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.008330] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.084946] pid_max: default: 32768 minimum: 301
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.090075] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.097139] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.106939] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.117458] futex hash table entries: 256 (order: -1, 3072 bytes)
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.125172] NET: Registered protocol family 16
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.131305] MIPS: machine is NETGEAR WNDR4300
Tue Oct 19 07:06:52 2021 kern.debug kernel: [    0.136160] ar71xx: using random MAC address for eth0
Tue Oct 19 07:06:52 2021 kern.warn kernel: [    0.374516] registering PCI controller with io_map_base unset
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.393819] PCI host bridge to bus 0000:00
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.398195] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.405563] pci_bus 0000:00: root bus resource [io  0x0000]
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.411492] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.418733] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Tue Oct 19 07:06:52 2021 kern.debug kernel: [    0.427197] pci 0000:00:00.0: [168c:0033] type 00 class 0x028000
Tue Oct 19 07:06:52 2021 kern.err kernel: [    0.427214] pci 0000:00:00.0: invalid calibration data
Tue Oct 19 07:06:52 2021 kern.debug kernel: [    0.432735] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
Tue Oct 19 07:06:52 2021 kern.debug kernel: [    0.432792] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Tue Oct 19 07:06:52 2021 kern.debug kernel: [    0.432876] pci 0000:00:00.0: supports D1
Tue Oct 19 07:06:52 2021 kern.debug kernel: [    0.432887] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Tue Oct 19 07:06:52 2021 kern.debug kernel: [    0.433105] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.433136] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.440937] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.452122] clocksource: Switched to clocksource MIPS
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.458582] NET: Registered protocol family 2
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.464193] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.471615] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.478439] TCP: Hash tables configured (established 1024 bind 1024)
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.485359] UDP hash table entries: 256 (order: 0, 4096 bytes)
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.491588] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.498567] NET: Registered protocol family 1
Tue Oct 19 07:06:52 2021 kern.debug kernel: [    0.503289] PCI: CLS 0 bytes, default 32
Tue Oct 19 07:06:52 2021 kern.warn kernel: [    0.506289] Crashlog allocated RAM at address 0x3f00000
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.513276] workingset: timestamp_bits=30 max_order=15 bucket_order=0
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.525507] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.531716] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.553187] io scheduler noop registered
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.557361] io scheduler deadline registered (default)
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.563325] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.572331] console [ttyS0] disabled
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.596217] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.605423] console [ttyS0] enabled
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.612857] bootconsole [early0] disabled
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.628514] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xf1
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.635017] nand: Micron NAND 128MiB 3,3V 8-bit
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.639613] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Tue Oct 19 07:06:52 2021 kern.info kernel: [    0.647346] Scanning device for bad blocks
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    0.655358] random: fast init done
Tue Oct 19 07:06:52 2021 kern.warn kernel: [    0.737317] mtd: ar934x-nfc: skipping zero sized partition
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    0.742917] 11 cmdlinepart partitions found on MTD device ar934x-nfc
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    0.749362] Creating 11 MTD partitions on "ar934x-nfc":
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    0.754688] 0x000000000000-0x000000040000 : "u-boot"
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    0.761107] 0x000000040000-0x000000080000 : "u-boot-env"
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    0.768611] 0x000000080000-0x0000000c0000 : "caldata"
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    0.775132] 0x0000000c0000-0x000000140000 : "pot"
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    0.781952] 0x000000140000-0x000000340000 : "language"
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    0.788581] 0x000000340000-0x0000003c0000 : "config"
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    0.795723] 0x0000003c0000-0x0000006c0000 : "traffic_meter"
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    0.802796] 0x0000006c0000-0x0000008c0000 : "kernel"
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    0.809859] 0x0000008c0000-0x000007fc0000 : "ubi"
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    0.816659] 0x0000006c0000-0x000007fc0000 : "firmware"
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    2.163462] random: crng init done
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    2.545095] 0x000007fc0000-0x000008000000 : "caldata_backup"
Tue Oct 19 07:06:52 2021 kern.info kernel: [    2.553326] libphy: Fixed MDIO Bus: probed
Tue Oct 19 07:06:52 2021 kern.info kernel: [    2.561398] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
Tue Oct 19 07:06:52 2021 kern.info kernel: [    3.235399] libphy: ag71xx_mdio: probed
Tue Oct 19 07:06:52 2021 kern.info kernel: [    3.863477] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
Tue Oct 19 07:06:52 2021 kern.info kernel: [    3.874878] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
Tue Oct 19 07:06:52 2021 kern.info kernel: [    3.883679] NET: Registered protocol family 10
Tue Oct 19 07:06:52 2021 kern.info kernel: [    3.893995] Segment Routing with IPv6
Tue Oct 19 07:06:52 2021 kern.info kernel: [    3.897825] NET: Registered protocol family 17
Tue Oct 19 07:06:52 2021 kern.info kernel: [    3.902449] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Tue Oct 19 07:06:52 2021 kern.info kernel: [    3.916183] 8021q: 802.1Q VLAN Support v1.8
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    3.924288] UBI: auto-attach mtd8
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    3.927692] ubi0: attaching mtd8
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    5.415975] ubi0: scanning is finished
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    5.437293] ubi0: attached mtd8 (name "ubi", size 119 MiB)
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    5.442927] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    5.449902] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    5.456804] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    5.463886] ubi0: good PEBs: 952, bad PEBs: 0, corrupted PEBs: 0
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    5.469983] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    5.477325] ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1315930365
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    5.486607] ubi0: available PEBs: 0, total reserved PEBs: 952, PEBs reserved for bad PEB handling: 20
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    5.496020] ubi0: background thread "ubi_bgt0d" started, PID 367
Tue Oct 19 07:06:52 2021 kern.info kernel: [    5.503712] block ubiblock0_0: created from ubi0:0(rootfs)
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    5.509287] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
Tue Oct 19 07:06:52 2021 kern.info kernel: [    5.516413] hctosys: unable to open rtc device (rtc0)
Tue Oct 19 07:06:52 2021 kern.info kernel: [    5.527905] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
Tue Oct 19 07:06:52 2021 kern.info kernel: [    5.536246] Freeing unused kernel memory: 208K
Tue Oct 19 07:06:52 2021 kern.warn kernel: [    5.540759] This architecture does not have kernel memory protection.
Tue Oct 19 07:06:52 2021 user.info kernel: [    6.263048] init: Console is alive
Tue Oct 19 07:06:52 2021 user.info kernel: [    6.266750] init: - watchdog -
Tue Oct 19 07:06:52 2021 user.info kernel: [    8.266819] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Tue Oct 19 07:06:52 2021 kern.info kernel: [    8.423348] usbcore: registered new interface driver usbfs
Tue Oct 19 07:06:52 2021 kern.info kernel: [    8.428990] usbcore: registered new interface driver hub
Tue Oct 19 07:06:52 2021 kern.info kernel: [    8.434525] usbcore: registered new device driver usb
Tue Oct 19 07:06:52 2021 kern.info kernel: [    8.477320] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Tue Oct 19 07:06:52 2021 kern.notice kernel: [    8.493608] SCSI subsystem initialized
Tue Oct 19 07:06:52 2021 kern.info kernel: [    8.502974] ehci-platform: EHCI generic platform driver
Tue Oct 19 07:06:52 2021 kern.info kernel: [    8.508406] ehci-platform ehci-platform: EHCI Host Controller
Tue Oct 19 07:06:52 2021 kern.info kernel: [    8.514311] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Tue Oct 19 07:06:52 2021 kern.info kernel: [    8.524456] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Tue Oct 19 07:06:52 2021 kern.info kernel: [    8.552148] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Tue Oct 19 07:06:52 2021 kern.info kernel: [    8.559306] hub 1-0:1.0: USB hub found
Tue Oct 19 07:06:52 2021 kern.info kernel: [    8.563627] hub 1-0:1.0: 1 port detected
Tue Oct 19 07:06:52 2021 kern.info kernel: [    8.572747] usbcore: registered new interface driver usb-storage
Tue Oct 19 07:06:52 2021 kern.info kernel: [    8.581649] usbcore: registered new interface driver uas
Tue Oct 19 07:06:52 2021 user.info kernel: [    8.587857] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Tue Oct 19 07:06:52 2021 user.info kernel: [    8.605714] init: - preinit -
Tue Oct 19 07:06:52 2021 kern.info kernel: [    9.408257] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Tue Oct 19 07:06:52 2021 kern.info kernel: [   10.443396] eth0: link up (1000Mbps/Full duplex)
Tue Oct 19 07:06:52 2021 kern.info kernel: [   10.448168] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Tue Oct 19 07:06:52 2021 user.info kernel: [   12.712779] mount_root: loading kmods from internal overlay
Tue Oct 19 07:06:52 2021 user.info kernel: [   12.779583] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Tue Oct 19 07:06:52 2021 user.info kernel: [   12.791897] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Tue Oct 19 07:06:52 2021 kern.err kernel: [   13.293522] print_req_error: I/O error, dev mtdblock4, sector 80
Tue Oct 19 07:06:52 2021 kern.notice kernel: [   14.001769] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 476
Tue Oct 19 07:06:52 2021 kern.notice kernel: [   14.120758] UBIFS (ubi0:1): recovery needed
Tue Oct 19 07:06:52 2021 kern.notice kernel: [   14.334733] UBIFS (ubi0:1): recovery completed
Tue Oct 19 07:06:52 2021 kern.notice kernel: [   14.339350] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Tue Oct 19 07:06:52 2021 kern.notice kernel: [   14.347340] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Tue Oct 19 07:06:52 2021 kern.notice kernel: [   14.357432] UBIFS (ubi0:1): FS size: 110596096 bytes (105 MiB, 871 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs)
Tue Oct 19 07:06:52 2021 kern.notice kernel: [   14.368221] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
Tue Oct 19 07:06:52 2021 kern.notice kernel: [   14.374956] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 9BEDC6D1-481A-427C-8A23-800E9CC21C71, small LPT model
Tue Oct 19 07:06:52 2021 user.info kernel: [   14.389016] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Tue Oct 19 07:06:52 2021 user.info kernel: [   14.408547] block: extroot: not configured
Tue Oct 19 07:06:52 2021 kern.notice kernel: [   14.413054] UBIFS (ubi0:1): un-mount UBI device 0
Tue Oct 19 07:06:52 2021 kern.notice kernel: [   14.417847] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
Tue Oct 19 07:06:52 2021 kern.notice kernel: [   14.429530] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 479
Tue Oct 19 07:06:52 2021 kern.notice kernel: [   14.659272] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Tue Oct 19 07:06:52 2021 kern.notice kernel: [   14.667276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Tue Oct 19 07:06:52 2021 kern.notice kernel: [   14.677350] UBIFS (ubi0:1): FS size: 110596096 bytes (105 MiB, 871 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs)
Tue Oct 19 07:06:52 2021 kern.notice kernel: [   14.688141] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
Tue Oct 19 07:06:52 2021 kern.notice kernel: [   14.694873] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 9BEDC6D1-481A-427C-8A23-800E9CC21C71, small LPT model
Tue Oct 19 07:06:52 2021 user.info kernel: [   14.712297] mount_root: loading kmods from internal overlay
Tue Oct 19 07:06:52 2021 user.info kernel: [   14.774568] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
Tue Oct 19 07:06:52 2021 user.info kernel: [   14.786056] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
Tue Oct 19 07:06:52 2021 kern.err kernel: [   15.047939] print_req_error: I/O error, dev mtdblock4, sector 80
Tue Oct 19 07:06:52 2021 user.info kernel: [   15.754406] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Tue Oct 19 07:06:52 2021 user.info kernel: [   15.770134] block: extroot: not configured
Tue Oct 19 07:06:52 2021 user.info kernel: [   15.777832] mount_root: switching to ubifs overlay
Tue Oct 19 07:06:52 2021 user.warn kernel: [   15.848346] urandom-seed: Seeding with /etc/urandom.seed
Tue Oct 19 07:06:52 2021 kern.info kernel: [   15.985777] eth0: link down
Tue Oct 19 07:06:52 2021 user.info kernel: [   16.004390] procd: - early -
Tue Oct 19 07:06:52 2021 user.info kernel: [   16.007431] procd: - watchdog -
Tue Oct 19 07:06:52 2021 user.info kernel: [   16.744038] procd: - watchdog -
Tue Oct 19 07:06:52 2021 user.info kernel: [   16.747713] procd: - ubus -
Tue Oct 19 07:06:52 2021 user.info kernel: [   17.115725] procd: - init -
Tue Oct 19 07:06:52 2021 user.info kernel: [   18.942781] kmodloader: loading kernel modules from /etc/modules.d/*
Tue Oct 19 07:06:52 2021 kern.info kernel: [   19.114770] tun: Universal TUN/TAP device driver, 1.6
Tue Oct 19 07:06:52 2021 kern.info kernel: [   19.153977] ip6_tables: (C) 2000-2006 Netfilter Core Team
Tue Oct 19 07:06:52 2021 kern.info kernel: [   19.192241] Netfilter messages via NETLINK v0.30.
Tue Oct 19 07:06:52 2021 kern.info kernel: [   19.215926] ip_set: protocol 6
Tue Oct 19 07:06:52 2021 kern.info kernel: [   19.343268] fuse init (API version 7.26)
Tue Oct 19 07:06:52 2021 kern.info kernel: [   19.379634] usbcore: registered new interface driver cdc_acm
Tue Oct 19 07:06:52 2021 kern.info kernel: [   19.385441] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Tue Oct 19 07:06:52 2021 kern.info kernel: [   19.433904] usbcore: registered new interface driver cdc_wdm
Tue Oct 19 07:06:52 2021 kern.info kernel: [   19.463811] Loading modules backported from Linux version v4.19.161-0-gdaefdc9eb24b
Tue Oct 19 07:06:52 2021 kern.info kernel: [   19.471591] Backport generated by backports.git v4.19.161-1-0-g4bb568fe
Tue Oct 19 07:06:52 2021 kern.info kernel: [   19.515424] ip_tables: (C) 2000-2006 Netfilter Core Team
Tue Oct 19 07:06:52 2021 kern.info kernel: [   19.565964] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
Tue Oct 19 07:06:52 2021 user.info kernel: [   19.640396] urngd: v1.0.2 started.
Tue Oct 19 07:06:52 2021 kern.info kernel: [   20.079609] usbcore: registered new interface driver usblp
Tue Oct 19 07:06:52 2021 kern.info kernel: [   20.127062] usbcore: registered new interface driver usbserial
Tue Oct 19 07:06:52 2021 kern.info kernel: [   20.133139] usbcore: registered new interface driver usbserial_generic
Tue Oct 19 07:06:52 2021 kern.info kernel: [   20.139840] usbserial: USB Serial support registered for generic
Tue Oct 19 07:06:52 2021 kern.info kernel: [   20.218803] wireguard: WireGuard 1.0.20200611 loaded. See www.wireguard.com for information.
Tue Oct 19 07:06:52 2021 kern.info kernel: [   20.227426] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
Tue Oct 19 07:06:52 2021 kern.info kernel: [   20.337831] xt_time: kernel timezone is -0000
Tue Oct 19 07:06:52 2021 kern.info kernel: [   20.364820] usbcore: registered new interface driver cdc_ether
Tue Oct 19 07:06:52 2021 kern.info kernel: [   20.379376] usbcore: registered new interface driver cdc_ncm
Tue Oct 19 07:06:52 2021 kern.info kernel: [   20.509707] usbcore: registered new interface driver huawei_cdc_ncm
Tue Oct 19 07:06:52 2021 kern.info kernel: [   20.690621] PPP generic driver version 2.4.2
Tue Oct 19 07:06:52 2021 kern.info kernel: [   20.718267] NET: Registered protocol family 24
Tue Oct 19 07:06:52 2021 kern.info kernel: [   20.745069] usbcore: registered new interface driver qmi_wwan
Tue Oct 19 07:06:52 2021 kern.info kernel: [   20.775145] usbcore: registered new interface driver rndis_host
Tue Oct 19 07:06:52 2021 kern.info kernel: [   20.794867] usbcore: registered new interface driver sierra
Tue Oct 19 07:06:52 2021 kern.info kernel: [   20.800610] usbserial: USB Serial support registered for Sierra USB modem
Tue Oct 19 07:06:52 2021 kern.info kernel: [   20.844485] usbcore: registered new interface driver sierra_net
Tue Oct 19 07:06:52 2021 kern.info kernel: [   20.984629] usbcore: registered new interface driver cdc_mbim
Tue Oct 19 07:06:52 2021 kern.info kernel: [   21.014397] usbcore: registered new interface driver option
Tue Oct 19 07:06:52 2021 kern.info kernel: [   21.020139] usbserial: USB Serial support registered for GSM modem (1-port)
Tue Oct 19 07:06:52 2021 kern.info kernel: [   21.063714] usbcore: registered new interface driver qcserial
Tue Oct 19 07:06:52 2021 kern.info kernel: [   21.069634] usbserial: USB Serial support registered for Qualcomm USB modem
Tue Oct 19 07:06:52 2021 kern.debug kernel: [   21.156520] ath: EEPROM regdomain: 0x0
Tue Oct 19 07:06:52 2021 kern.debug kernel: [   21.156530] ath: EEPROM indicates default country code should be used
Tue Oct 19 07:06:52 2021 kern.debug kernel: [   21.156534] ath: doing EEPROM country->regdmn map search
Tue Oct 19 07:06:52 2021 kern.debug kernel: [   21.156551] ath: country maps to regdmn code: 0x3a
Tue Oct 19 07:06:52 2021 kern.debug kernel: [   21.156557] ath: Country alpha2 being used: US
Tue Oct 19 07:06:52 2021 kern.debug kernel: [   21.156561] ath: Regpair used: 0x3a
Tue Oct 19 07:06:52 2021 kern.debug kernel: [   21.170727] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Tue Oct 19 07:06:52 2021 kern.info kernel: [   21.172868] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47
Tue Oct 19 07:06:52 2021 kern.info kernel: [   21.179802] pci 0000:00:00.0: using irq 40 for pin 1
Tue Oct 19 07:06:52 2021 kern.warn kernel: [   21.184921] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Tue Oct 19 07:06:52 2021 kern.debug kernel: [   21.267633] ath: EEPROM regdomain: 0x0
Tue Oct 19 07:06:52 2021 kern.debug kernel: [   21.267641] ath: EEPROM indicates default country code should be used
Tue Oct 19 07:06:52 2021 kern.debug kernel: [   21.267645] ath: doing EEPROM country->regdmn map search
Tue Oct 19 07:06:52 2021 kern.debug kernel: [   21.267662] ath: country maps to regdmn code: 0x3a
Tue Oct 19 07:06:52 2021 kern.debug kernel: [   21.267668] ath: Country alpha2 being used: US
Tue Oct 19 07:06:52 2021 kern.debug kernel: [   21.267673] ath: Regpair used: 0x3a
Tue Oct 19 07:06:52 2021 kern.debug kernel: [   21.279810] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Tue Oct 19 07:06:52 2021 kern.info kernel: [   21.281905] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
Tue Oct 19 07:06:52 2021 user.info kernel: [   21.342734] kmodloader: done loading kernel modules from /etc/modules.d/*
Tue Oct 19 07:06:54 2021 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Tue Oct 19 07:06:54 2021 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Tue Oct 19 07:06:54 2021 user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Tue Oct 19 07:06:55 2021 daemon.info dnsmasq[1213]: started, version 2.80 cachesize 150
Tue Oct 19 07:06:55 2021 daemon.info dnsmasq[1213]: DNS service limited to local subnets
Tue Oct 19 07:06:55 2021 daemon.info dnsmasq[1213]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-nettlehash no-DNSSEC no-ID loop-detect inotify dumpfile
Tue Oct 19 07:06:55 2021 daemon.info dnsmasq[1213]: using local addresses only for domain test
Tue Oct 19 07:06:55 2021 daemon.info dnsmasq[1213]: using local addresses only for domain onion
Tue Oct 19 07:06:55 2021 daemon.info dnsmasq[1213]: using local addresses only for domain localhost
Tue Oct 19 07:06:55 2021 daemon.info dnsmasq[1213]: using local addresses only for domain local
Tue Oct 19 07:06:55 2021 daemon.info dnsmasq[1213]: using local addresses only for domain invalid
Tue Oct 19 07:06:55 2021 daemon.info dnsmasq[1213]: using local addresses only for domain bind
Tue Oct 19 07:06:55 2021 daemon.info dnsmasq[1213]: using local addresses only for domain lan
Tue Oct 19 07:06:55 2021 daemon.warn dnsmasq[1213]: no servers found in /tmp/resolv.conf.auto, will retry
Tue Oct 19 07:06:55 2021 daemon.info dnsmasq[1213]: read /etc/hosts - 4 addresses
Tue Oct 19 07:06:55 2021 daemon.info dnsmasq[1213]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Tue Oct 19 07:06:58 2021 user.notice : Added device handler type: 8021ad
Tue Oct 19 07:06:58 2021 user.notice : Added device handler type: 8021q
Tue Oct 19 07:06:58 2021 user.notice : Added device handler type: macvlan
Tue Oct 19 07:06:58 2021 user.notice : Added device handler type: veth
Tue Oct 19 07:06:58 2021 user.notice : Added device handler type: bridge
Tue Oct 19 07:06:58 2021 user.notice : Added device handler type: Network device
Tue Oct 19 07:06:58 2021 user.notice : Added device handler type: tunnel
Tue Oct 19 07:07:01 2021 user.info adblock-4.0.7[1364]: adblock instance started ::: action: start, priority: 0, pid: 1364
Tue Oct 19 07:07:01 2021 kern.err kernel: [   33.576891] print_req_error: I/O error, dev mtdblock4, sector 80
Tue Oct 19 07:07:03 2021 cron.info crond[1490]: crond (busybox 1.30.1) started, log level 5
Tue Oct 19 07:07:07 2021 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Tue Oct 19 07:07:08 2021 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/radvd
Tue Oct 19 07:07:08 2021 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Tue Oct 19 07:07:08 2021 user.info adblock-4.0.7[1364]: download of 'yoyo' failed, url: https://pgl.yoyo.org/adservers/serverli … plaintext, rule: /^([[:alnum:]_-]{1,63}\.)+[[:alpha:]]+([[:space:]]|$)/{print tolower($1)}, categories: -, rc: 4, log: Downloading 'https://pgl.yoyo.org/adservers/serverli … =plaintext' Failed to send request: Operation not permitted
Tue Oct 19 07:07:08 2021 user.info adblock-4.0.7[1364]: download of 'disconnect' failed, url: https://s3.amazonaws.com/lists.disconne … ising.txt, rule: /^([[:alnum:]_-]{1,63}\.)+[[:alpha:]]+([[:space:]]|$)/{print tolower($1)}, categories: -, rc: 4, log: Downloading 'https://s3.amazonaws.com/lists.disconne … tising.txt' Failed to send request: Operation not permitted
Tue Oct 19 07:07:08 2021 user.info adblock-4.0.7[1364]: download of 'adguard' failed, url: https://filters.adtidy.org/windows/filters/15.txt, rule: BEGIN{FS="[/|^|\r]"}/^\|\|([[:alnum:]_-]{1,63}\.)+[[:alpha:]]+[\/\^\r]+$/{print tolower($3)}, categories: -, rc: 4, log: Downloading 'https://filters.adtidy.org/windows/filters/15.txt' Failed to send request: Operation not permitted
Tue Oct 19 07:07:08 2021 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Tue Oct 19 07:07:08 2021 user.info adblock-4.0.7[1364]: download of 'adaway' failed, url: https://raw.githubusercontent.com/AdAwa … hosts.txt, rule: /^127\.0\.0\.1[[:space:]]+([[:alnum:]_-]{1,63}\.)+[[:alpha:]]+([[:space:]]|$)/{print tolower($2)}, categories: -, rc: 4, log: Downloading 'https://raw.githubusercontent.com/AdAwa … /hosts.txt' Failed to send request: Operation not permitted
Tue Oct 19 07:07:08 2021 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Tue Oct 19 07:07:09 2021 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Tue Oct 19 07:07:09 2021 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Tue Oct 19 07:07:09 2021 daemon.info dnsmasq[1213]: exiting on receipt of SIGTERM
Tue Oct 19 07:07:10 2021 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Tue Oct 19 07:07:10 2021 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Tue Oct 19 07:07:10 2021 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Tue Oct 19 07:07:10 2021 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Tue Oct 19 07:07:11 2021 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Tue Oct 19 07:07:11 2021 user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Tue Oct 19 07:07:11 2021 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Tue Oct 19 07:07:13 2021 kern.info kernel: [   45.274535] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Tue Oct 19 07:07:13 2021 kern.info kernel: [   45.284785] device eth0 entered promiscuous mode
Tue Oct 19 07:07:13 2021 kern.info kernel: [   45.297685] br-lan: port 1(eth0.1) entered blocking state
Tue Oct 19 07:07:13 2021 kern.info kernel: [   45.303235] br-lan: port 1(eth0.1) entered disabled state
Tue Oct 19 07:07:13 2021 kern.info kernel: [   45.309043] device eth0.1 entered promiscuous mode
Tue Oct 19 07:07:13 2021 kern.info kernel: [   45.341187] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Tue Oct 19 07:07:13 2021 daemon.notice netifd: Interface 'lan' is enabled
Tue Oct 19 07:07:13 2021 daemon.notice netifd: Interface 'lan' is setting up now
Tue Oct 19 07:07:13 2021 daemon.notice netifd: Interface 'lan' is now up
Tue Oct 19 07:07:13 2021 daemon.notice netifd: Interface 'loopback' is enabled
Tue Oct 19 07:07:13 2021 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Oct 19 07:07:13 2021 daemon.notice netifd: Interface 'loopback' is now up
Tue Oct 19 07:07:13 2021 kern.info kernel: [   45.405752] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
Tue Oct 19 07:07:13 2021 daemon.notice netifd: Interface 'wan' is enabled
Tue Oct 19 07:07:13 2021 daemon.notice netifd: Interface 'wan' is setting up now
Tue Oct 19 07:07:13 2021 daemon.notice netifd: Interface 'wan' is now up
Tue Oct 19 07:07:13 2021 daemon.notice netifd: Interface 'wan6' is enabled
Tue Oct 19 07:07:13 2021 daemon.notice netifd: Interface 'wg0' is setting up now
Tue Oct 19 07:07:13 2021 daemon.notice netifd: Network device 'lo' link is up
Tue Oct 19 07:07:13 2021 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Oct 19 07:07:14 2021 kern.info kernel: [   46.283840] eth0: link up (1000Mbps/Full duplex)
Tue Oct 19 07:07:14 2021 kern.info kernel: [   46.288603] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Tue Oct 19 07:07:14 2021 daemon.notice netifd: VLAN 'eth0.1' link is up
Tue Oct 19 07:07:14 2021 daemon.notice netifd: VLAN 'eth0.2' link is up
Tue Oct 19 07:07:14 2021 daemon.notice netifd: Interface 'wan' has link connectivity
Tue Oct 19 07:07:14 2021 daemon.notice netifd: Interface 'wan6' has link connectivity
Tue Oct 19 07:07:14 2021 daemon.notice netifd: Network device 'eth0' link is up
Tue Oct 19 07:07:14 2021 kern.info kernel: [   46.422279] br-lan: port 1(eth0.1) entered blocking state
Tue Oct 19 07:07:14 2021 kern.info kernel: [   46.427778] br-lan: port 1(eth0.1) entered forwarding state
Tue Oct 19 07:07:14 2021 kern.info kernel: [   46.433835] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
Tue Oct 19 07:07:14 2021 daemon.notice netifd: bridge 'br-lan' link is up
Tue Oct 19 07:07:14 2021 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Oct 19 07:07:14 2021 kern.info kernel: [   46.552348] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Tue Oct 19 07:07:14 2021 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Oct 19 07:07:16 2021 user.notice vpnbypass [1777]: service monitoring interfaces: wan
Tue Oct 19 07:07:17 2021 daemon.notice netifd: Interface 'wg0' is now up
Tue Oct 19 07:07:17 2021 daemon.notice netifd: Network device 'wg0' link is up
Tue Oct 19 07:07:17 2021 daemon.notice procd: /etc/rc.d/S96led: setting up led WAN (green)
Tue Oct 19 07:07:18 2021 daemon.notice procd: /etc/rc.d/S96led: setting up led WAN (amber)
Tue Oct 19 07:07:18 2021 authpriv.info dropbear[2119]: Not backgrounding
Tue Oct 19 07:07:18 2021 daemon.notice procd: /etc/rc.d/S96led: setting up led USB
Tue Oct 19 07:07:18 2021 kern.debug kernel: [   50.360492] ath: EEPROM regdomain: 0x8268
Tue Oct 19 07:07:18 2021 kern.debug kernel: [   50.360502] ath: EEPROM indicates we should expect a country code
Tue Oct 19 07:07:18 2021 kern.debug kernel: [   50.360509] ath: doing EEPROM country->regdmn map search
Tue Oct 19 07:07:18 2021 kern.debug kernel: [   50.360517] ath: country maps to regdmn code: 0x37
Tue Oct 19 07:07:18 2021 kern.debug kernel: [   50.360523] ath: Country alpha2 being used: PL
Tue Oct 19 07:07:18 2021 kern.debug kernel: [   50.360528] ath: Regpair used: 0x37
Tue Oct 19 07:07:18 2021 kern.debug kernel: [   50.360535] ath: regdomain 0x8268 dynamically updated by user
Tue Oct 19 07:07:18 2021 kern.debug kernel: [   50.360613] ath: EEPROM regdomain: 0x8268
Tue Oct 19 07:07:18 2021 kern.debug kernel: [   50.360617] ath: EEPROM indicates we should expect a country code
Tue Oct 19 07:07:18 2021 kern.debug kernel: [   50.360624] ath: doing EEPROM country->regdmn map search
Tue Oct 19 07:07:18 2021 kern.debug kernel: [   50.360630] ath: country maps to regdmn code: 0x37
Tue Oct 19 07:07:18 2021 kern.debug kernel: [   50.360635] ath: Country alpha2 being used: PL
Tue Oct 19 07:07:18 2021 kern.debug kernel: [   50.360639] ath: Regpair used: 0x37
Tue Oct 19 07:07:18 2021 kern.debug kernel: [   50.360645] ath: regdomain 0x8268 dynamically updated by user
Tue Oct 19 07:07:18 2021 daemon.notice procd: /etc/rc.d/S96led: setting up led WLAN2G
Tue Oct 19 07:07:18 2021 daemon.notice procd: /etc/rc.d/S96led: setting up led WLAN5G
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: started, version 2.80 cachesize 150
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: DNS service limited to local subnets
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-nettlehash no-DNSSEC no-ID loop-detect inotify dumpfile
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq-dhcp[2156]: DHCP, IP range 192.168.0.100 -- 192.168.0.149, lease time 12h
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: using local addresses only for domain test
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: using local addresses only for domain onion
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: using local addresses only for domain localhost
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: using local addresses only for domain local
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: using local addresses only for domain invalid
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: using local addresses only for domain bind
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: using local addresses only for domain lan
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: reading /tmp/resolv.conf.auto
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: using local addresses only for domain test
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: using local addresses only for domain onion
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: using local addresses only for domain localhost
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: using local addresses only for domain local
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: using local addresses only for domain invalid
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: using local addresses only for domain bind
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: using local addresses only for domain lan
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: using nameserver 8.8.8.8#53
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: using nameserver 8.8.4.4#53
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: read /etc/hosts - 4 addresses
Tue Oct 19 07:07:18 2021 daemon.info dnsmasq[2156]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Tue Oct 19 07:07:19 2021 daemon.info dnsmasq-dhcp[2156]: read /etc/ethers - 0 addresses
Tue Oct 19 07:07:19 2021 daemon.notice ksmbd: Starting Ksmbd userspace service.
Tue Oct 19 07:07:21 2021 user.info adblock-4.0.7[1364]: blocklist with overall 0 blocked domains loaded successfully (NETGEAR WNDR4300, OpenWrt 19.07-SNAPSHOT r11285-11f4918ebb)
Tue Oct 19 07:07:22 2021 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Tue Oct 19 07:07:22 2021 kern.info kernel: [   54.621159] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Tue Oct 19 07:07:22 2021 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Tue Oct 19 07:07:22 2021 kern.info kernel: [   54.725833] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Tue Oct 19 07:07:22 2021 kern.info kernel: [   54.810251] br-lan: port 2(wlan0) entered blocking state
Tue Oct 19 07:07:22 2021 kern.info kernel: [   54.815715] br-lan: port 2(wlan0) entered disabled state
Tue Oct 19 07:07:22 2021 kern.info kernel: [   54.821438] device wlan0 entered promiscuous mode
Tue Oct 19 07:07:22 2021 kern.info kernel: [   54.831606] br-lan: port 3(wlan1) entered blocking state
Tue Oct 19 07:07:22 2021 kern.info kernel: [   54.840318] br-lan: port 3(wlan1) entered disabled state
Tue Oct 19 07:07:22 2021 kern.info kernel: [   54.846100] device wlan1 entered promiscuous mode
Tue Oct 19 07:07:22 2021 kern.info kernel: [   54.851006] br-lan: port 3(wlan1) entered blocking state
Tue Oct 19 07:07:22 2021 kern.info kernel: [   54.856452] br-lan: port 3(wlan1) entered forwarding state
Tue Oct 19 07:07:22 2021 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Tue Oct 19 07:07:22 2021 daemon.err hostapd: Using interface wlan0 with hwaddr a0:63:91:7d:08:6b and ssid "Ingram-dom47"
Tue Oct 19 07:07:22 2021 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Tue Oct 19 07:07:23 2021 daemon.err hostapd: Using interface wlan1 with hwaddr a0:63:91:7d:08:6d and ssid "OpenWrt"
Tue Oct 19 07:07:23 2021 kern.info kernel: [   55.642216] br-lan: port 3(wlan1) entered disabled state
Tue Oct 19 07:07:25 2021 daemon.info dnsmasq-dhcp[2156]: DHCPDISCOVER(br-lan) cc:50:e3:39:66:c8
Tue Oct 19 07:07:25 2021 daemon.info dnsmasq-dhcp[2156]: DHCPOFFER(br-lan) 192.168.0.120 cc:50:e3:39:66:c8
Tue Oct 19 07:07:25 2021 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2)
Tue Oct 19 07:10:09 2021 kern.info kernel: [   58.126825] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Tue Oct 19 07:10:09 2021 kern.info kernel: [   58.133532] br-lan: port 2(wlan0) entered blocking state
Tue Oct 19 07:10:09 2021 kern.info kernel: [   58.138941] br-lan: port 2(wlan0) entered forwarding state
Tue Oct 19 07:10:10 2021 kern.info kernel: [   58.279137] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Tue Oct 19 07:10:10 2021 kern.info kernel: [   58.286250] br-lan: port 3(wlan1) entered blocking state
Tue Oct 19 07:10:10 2021 kern.info kernel: [   58.291652] br-lan: port 3(wlan1) entered forwarding state
Tue Oct 19 07:10:10 2021 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->ENABLED
Tue Oct 19 07:10:10 2021 daemon.notice hostapd: wlan0: AP-ENABLED
Tue Oct 19 07:10:10 2021 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->ENABLED
Tue Oct 19 07:10:10 2021 daemon.notice hostapd: wlan1: AP-ENABLED
Tue Oct 19 07:10:11 2021 daemon.notice netifd: Network device 'wlan1' link is up
Tue Oct 19 07:10:11 2021 daemon.notice netifd: Network device 'wlan0' link is up
Tue Oct 19 07:10:13 2021 user.notice firewall: Reloading firewall due to ifup of wg0 (wg0)
Tue Oct 19 07:10:13 2021 daemon.info procd: - init complete -
Tue Oct 19 07:10:13 2021 user.info wsdd2[2733]: starting.
Tue Oct 19 07:10:13 2021 user.err wsdd2[2733]: error: wsdd-mcast-v6: wsd_send_soap_msg: send: Operation not permitted
Tue Oct 19 07:10:13 2021 user.err wsdd2[2733]: error: wsdd-mcast-v6: wsd_send_soap_msg: send: Operation not permitted
Tue Oct 19 07:10:14 2021 user.notice ddns-scripts[2692]: myddns_ipv4: PID '2692' started at 2021-10-19 07:10
Tue Oct 19 07:10:15 2021 user.warn ddns-scripts[2692]: myddns_ipv4: Service section disabled! - TERMINATE
Tue Oct 19 07:10:15 2021 user.warn ddns-scripts[2692]: myddns_ipv4: PID '2692' exit WITH ERROR '1' at 2021-10-19 07:10
Tue Oct 19 07:10:24 2021 daemon.info dnsmasq-dhcp[2156]: DHCPDISCOVER(br-lan) cc:50:e3:39:66:c8
Tue Oct 19 07:10:24 2021 daemon.info dnsmasq-dhcp[2156]: DHCPOFFER(br-lan) 192.168.0.120 cc:50:e3:39:66:c8
Tue Oct 19 07:10:24 2021 daemon.info dnsmasq-dhcp[2156]: DHCPREQUEST(br-lan) 192.168.0.120 cc:50:e3:39:66:c8
Tue Oct 19 07:10:24 2021 daemon.info dnsmasq-dhcp[2156]: DHCPACK(br-lan) 192.168.0.120 cc:50:e3:39:66:c8 ZAMEL-MEW-01-CC50E33966C8
Tue Oct 19 07:12:49 2021 daemon.err uhttpd[1526]: luci: accepted login on / for root from 10.0.0.3
Szrot?

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,288

Odp: Padły oba radia wndr4300

Wg logów wszystko się uruchomiło.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez yaroslavik (edytowany przez yaroslavik 2021-10-19 07:39:03)

  • Zarejestrowany: 2015-09-09
  • Posty: 155

Odp: Padły oba radia wndr4300

Właśnie widzę, że radio 2,4 działa, a 5gh nie.
https://1drv.ms/u/s!Ai9dndYcgluShYwUDg3oQ7dW5N1e2A
Niedawno nic nie było,
Tydzień temu wifi zanikło, restart pomógł. Teraz restartowałem, usuwałem radio, bez efektu..
Pójdzie na złom ten netgear. ;cool
Gargoyle było tu, luci kilka razy reinstalowanie..
Jakiś czas chodzi i potem cyrki takie..

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,288

Odp: Padły oba radia wndr4300

A czasami w wndr4300 nie było tak że radio czasami się nie uruchamiało? Coś mi świta o bardzo danych postach, ale nie pamiętam szczegółów.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez yaroslavik (edytowany przez yaroslavik 2021-10-19 08:32:49)

  • Zarejestrowany: 2015-09-09
  • Posty: 155

Odp: Padły oba radia wndr4300

Na oryginalnym sofcie w ogóle nie wiem, nie używałem..
Czyli ten netgear ma taką przypadłość?

6 Odpowiedź przez yaroslavik

  • Zarejestrowany: 2015-09-09
  • Posty: 155

Odp: Padły oba radia wndr4300

Sekcja wifi tak wygląda
https://1drv.ms/u/s!Ai9dndYcgluShYwVcoib-SMlEhgBEw
Radio niby włączone a wifi nie ma(5gh),
Kanał zrobiłem na auto, 40mhz nie wymuszaj, i nie chce pracować..
Sieć 2,4gh włącza się po dłuższym czasie od restartu.

7 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,288

Odp: Padły oba radia wndr4300

Nie pokazuj luci bo tam mało co znaczą te obrazki. Pokaż

uci show wireless
iw dev

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

8 Odpowiedź przez yaroslavik

  • Zarejestrowany: 2015-09-09
  • Posty: 155

Odp: Padły oba radia wndr4300

ucishow:
root@OpenWrt:~# uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.hwmode='11g'
wireless.radio0.path='platform/ar934x_wmac'
wireless.radio0.country='PL'
wireless.radio0.txpower='20'
wireless.radio0.htmode='HT40'
wireless.radio0.channel='3'
wireless.radio0.noscan='1'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.ssid='Ingram-dom47'
wireless.default_radio0.key='bociaga3171'
wireless.default_radio0.encryption='psk2'
wireless.radio1=wifi-device
wireless.radio1.type='mac80211'
wireless.radio1.hwmode='11a'
wireless.radio1.path='pci0000:00/0000:00:00.0'
wireless.radio1.country='PL'
wireless.radio1.htmode='HT40'
wireless.radio1.channel='auto'
wireless.radio1.legacy_rates='0'
wireless.wifinet2=wifi-iface
wireless.wifinet2.ssid='OpenWrt'
wireless.wifinet2.encryption='psk2'
wireless.wifinet2.device='radio1'
wireless.wifinet2.mode='ap'
wireless.wifinet2.network='lan'
wireless.wifinet2.key='bociaga3171'
---------------------------------------------
root@OpenWrt:~# iw dev
phy#1
        Interface wlan1
                ifindex 10
                wdev 0x100000002
                addr a0:63:91:7d:08:6d
                ssid OpenWrt
                type AP
                channel 44 (5220 MHz), width: 40 MHz, center1: 5230 MHz
                txpower 21.00 dBm
                multicast TXQ:
                        qsz-byt qsz-pkt flows   drops   marks   overlmt hashcol tx-bytes        tx-packets
                        0       0       0       0       0       0       0       0               0
phy#0
        Interface wlan0
                ifindex 9
                wdev 0x2
                addr a0:63:91:7d:08:6b
                ssid Ingram-dom47
                type AP
                channel 3 (2422 MHz), width: 40 MHz, center1: 2432 MHz
                txpower 16.00 dBm
                multicast TXQ:
                        qsz-byt qsz-pkt flows   drops   marks   overlmt hashcol tx-bytes        tx-packets
                        0       0       2503    0       0       0       0       441015          2507

9 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,288

Odp: Padły oba radia wndr4300

Wg tego - wszystko jest uruchomione. Wywal ten kanał auto i ustaw na stałe 36, bo jak wpadnie na DFS to i z kilka minut będzie się uruchamiało radio 5GHz i go nie zobaczysz w tym czasie.

Jeżeli teraz działa i widzisz obie sieci to problemem jest to "auto" - zmień kanał. Jeżeli nie widzisz sieci 5GHz to możliwe że masz fizycznie uszkodzone radio.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

10 Odpowiedź przez yaroslavik (edytowany przez yaroslavik 2021-10-19 12:07:00)

  • Zarejestrowany: 2015-09-09
  • Posty: 155

Odp: Padły oba radia wndr4300

ok,dzięki.
Raczej mu nic nie pomoże..
Znowu problem co w miejsce wndr4300?

11 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,288

Odp: Padły oba radia wndr4300

Kup R6220 za 100zł. Porty czasami flipują, wifi działa tak sobie w zależności jakich masz klientów, ale jest tani i dość popularny.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

12 Odpowiedź przez yaroslavik

  • Zarejestrowany: 2015-09-09
  • Posty: 155

Odp: Padły oba radia wndr4300

Wndr4300 był u mnie jako główny router.
Dom dwupiętrowy z piwnicą-mam tu 3 ap i jeszcze jeden na podwórku.
Trochę zaczynam bawić się w Home Assistanta,będzie dużo gadżetów podpiętych pod wifi.
No i lan gigabitowy musi być.
radio nie musi być najmocniejsze(na dwa pokoje na parterze).
Ten R6220 niezawodny jest?W x-kom 270 pln..

13 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,288

Odp: Padły oba radia wndr4300

Dziesiątki ludzi go używa (bo jest tani smile)

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

14 Odpowiedź przez yaroslavik

  • Zarejestrowany: 2015-09-09
  • Posty: 155

Odp: Padły oba radia wndr4300

Dzięki,
Pytanie odnośnie instalacji wireguard na nowym routerze-
nie da się przenieść jego konfiguracji i kluczy na nowy router?
Wszystkie klucze trzeba generować od nowa?

15 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,288

Odp: Padły oba radia wndr4300

Po prostu przenosisz. Przecież klucz nie jest w jakiś sposób związany ze sprzętem, to tylko ciąg znaków. Po co miałbyś generować to jeszcze raz?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

16 Odpowiedź przez yaroslavik

  • Zarejestrowany: 2015-09-09
  • Posty: 155

Odp: Padły oba radia wndr4300

Dzięki za wszystko.

17 Odpowiedź przez chemik89 (edytowany przez chemik89 2021-10-20 09:52:45)

  • Zarejestrowany: 2017-06-08
  • Posty: 404

Odp: Padły oba radia wndr4300

nowego 6220 to raczej nie warto kupować, tanie były używki z allegro. Za jakieś 100zł jest xiaomi gigabit z tym samym soc (tylko ze wariant 2rdzeniowy a nie 1.), tylko miał chyba mniej portów.

18 Odpowiedź przez Camis

  • Camis
  • Camis
  • Użytkownik
  • Nieaktywny
  • Skąd: Łódź
  • Zarejestrowany: 2012-11-06
  • Posty: 125

Odp: Padły oba radia wndr4300

chemik89 napisał/a:

nowego 6220 to raczej nie warto kupować, tanie były używki z allegro.

Są ponownie dostępne od kilku miesięcy.

Camis's Strona

19 Odpowiedź przez chemik89 (edytowany przez chemik89 2021-10-20 17:15:45)

  • Zarejestrowany: 2017-06-08
  • Posty: 404

Odp: Padły oba radia wndr4300

Camis napisał/a:
chemik89 napisał/a:

nowego 6220 to raczej nie warto kupować, tanie były używki z allegro.

Są ponownie dostępne od kilku miesięcy.

były po 65zł smile teraz są po 100+, i pewnie w dużej części przebrane, czyli z błędami nand. Chociaż sprzedawca chyba inny, więc i może inny stan.

20 Odpowiedź przez Camis

  • Camis
  • Camis
  • Użytkownik
  • Nieaktywny
  • Skąd: Łódź
  • Zarejestrowany: 2012-11-06
  • Posty: 125

Odp: Padły oba radia wndr4300

2 lata temu brałem po 99zł i teraz też są za 99zł u tego samego gościa, mam od niego 5szt.

Camis's Strona

21 Odpowiedź przez yaroslavik

  • Zarejestrowany: 2015-09-09
  • Posty: 155

Odp: Padły oba radia wndr4300

Właśnie nie wiem co robić, gość na Allegro sprzedaje używki po 99pln.
W sklepie nowy kosztuje 270pln...

22 Odpowiedź przez Królik

  • Skąd: Warszawa
  • Zarejestrowany: 2015-07-10
  • Posty: 1,106

Odp: Padły oba radia wndr4300

Te używki ma pół forum. Jak jest lipa, to gość nie robi kłopotu z oddaniem.

Mam i używam: Fujitsu Futro S720, Netgear R6220, Unielec U7621-06, TP-Linki 1043 V1, V2, Linksysy EA7500v2, AeroHive AP350, Linksys EA8500, ZTE MF286d.
Mam: D-Linki DWR-921, DWR-118, DWR-116, TP-Link WDR-4900 v1, Checkpoint L-50, Linksysy 1900ACS, LB-Link BL-W1200,

Królik's Strona

23 Odpowiedź przez Bartekk

  • Zarejestrowany: 2013-06-30
  • Posty: 890

Odp: Padły oba radia wndr4300

chemik89 napisał/a:
Camis napisał/a:
chemik89 napisał/a:

nowego 6220 to raczej nie warto kupować, tanie były używki z allegro.

Są ponownie dostępne od kilku miesięcy.

były po 65zł smile teraz są po 100+, i pewnie w dużej części przebrane, czyli z błędami nand. Chociaż sprzedawca chyba inny, więc i może inny stan.

Tydzień temu brałem jedną sztukę i chodzi stabilnie jak skała więc z tymi przebranymi nie byłbym taki pewien.

24 Odpowiedź przez yaroslavik (edytowany przez yaroslavik 2021-10-22 14:40:15)

  • Zarejestrowany: 2015-09-09
  • Posty: 155

Odp: Padły oba radia wndr4300

Zamówione dwie sztuki,dziś przyjechały.:cool