Temat: extroot tplink 8970 problem
Witam na leciwym tplinku zainstalowalemsobie nowe openwrt 21.02. Przy probie stworzenia konfiguracji extroot wedle poradnika z tego forum podczas formatowania usb wywala blad i nie wiem jak to obejsc. czy mozna prosic o pdopowiedz ??
Robie wedle tego linka https://eko.one.pl/?p=openwrt-externalroot
Na wersji 17 dzialal extroot na tym usb
mkfs.f2fs /dev/sda1
daje taki blad
root@OpenWrt:~# mkfs.f2fs /dev/sda1
F2FS-tools: mkfs.f2fs Ver: 1.14.0 (2020-08-24)
Info: Disable heap-based policy
Info: Debug level = 0
Info: Trim is enabled
Info: [/dev/sda1] Disk Model: DataTraveler 2.0
Info: Segments per section = 1
Info: Sections per zone = 1
Info: sector size = 512
Info: total sectors = 27262976 (13312 MB)
Info: zone aligned segment0 blkaddr: 512
Info: format version with
"Linux version 5.4.137 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16256-2d5ee43dc6)) #0 SMP Sat Jul 31 17:21:01 2021"
Info: [/dev/sda1] Discarding device
Info: This device doesn't support BLKSECDISCARD
Info: This device doesn't support BLKDISCARD
read() fail.
Error: Failed to create the root directory!!!
Error: Could not format the device!!!
c, u, RA, CH, CM, Repl=
4195200 0 1 0 1 0Czy to moze byc wina usb ?