FAQ o OpenWrt | Sprzedam różne routery | Oddam

ksx4system · 2021-09-08 17:35:28

ksx4system
Użytkownik
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2021-09-08
Posty: 15

Temat: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

Witam serdecznie wszystkich użytkowników forum

Posiadam wspomniany w temacie router TP-Link Archer C2 w wersji sprzętowej v1.1 z zainstalowanym OpenWrt 19.07.8 (czysty obraz ze strony openwrt.org). Wi-Fi w paśmie 2,4GHz nie działa w ogóle tj. pożądany SSID nie jest rozgłaszany. System rozpoznaje radio jako "Generic 802.11bgn", a jakakolwiek zmiana w ustawieniach tego interfejsu przenosi go w stan nieaktywny z komunikatem "device is not active". Radio w paśmie 5GHz co ciekawe działa ale z bardzo ograniczoną mocą (maksymalnie 10dBm).

Jak to naprawić?

MikroTik RouterOS to życie

Cezary · 2021-09-08 17:46:51

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,872

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

Zaloguj się przez ssh i pokaż wyniki poleceń:

uci show wireless
iw list
iw dev

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

ksx4system · 2021-09-08 18:05:14

ksx4system
Użytkownik
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2021-09-08
Posty: 15

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

Pozwoliłem sobie ocenzurować SSID, hasła i MAC adresy

uci show wireless

wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.hwmode='11a'
wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
wireless.radio0.htmode='VHT80'
wireless.radio0.channel='48'
wireless.radio0.legacy_rates='0'
wireless.radio0.country='US'
wireless.radio0.disabled='0'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.encryption='psk2+ccmp'
wireless.default_radio0.wpa_disable_eapol_key_retries='1'
wireless.default_radio0.ieee80211r='1'
wireless.default_radio0.ft_over_ds='0'
wireless.default_radio0.key='CENZURA'
wireless.default_radio0.mobility_domain='7420'
wireless.default_radio0.ieee80211w='2'
wireless.default_radio0.ft_psk_generate_local='1'
wireless.default_radio0.ssid='CENZURA'
wireless.default_radio0.dtim_period='10'
wireless.radio1=wifi-device
wireless.radio1.type='mac80211'
wireless.radio1.hwmode='11g'
wireless.radio1.path='platform/10180000.wmac'
wireless.radio1.channel='3'
wireless.radio1.legacy_rates='0'
wireless.radio1.country='PL'
wireless.radio1.disabled='0'
wireless.radio1.txpower='20'
wireless.radio1.htmode='HT20'
wireless.default_radio1=wifi-iface
wireless.default_radio1.device='radio1'
wireless.default_radio1.network='lan'
wireless.default_radio1.mode='ap'
wireless.default_radio1.ssid='CENZURA'
wireless.default_radio1.dtim_period='10'
wireless.default_radio1.key='CENZURA'
wireless.default_radio1.ft_over_ds='0'
wireless.default_radio1.ieee80211w='1'
wireless.default_radio1.encryption='psk2+ccmp'
wireless.default_radio1.wpa_disable_eapol_key_retries='1'
wireless.default_radio1.mobility_domain='7420'
wireless.default_radio1.ft_psk_generate_local='1'
wireless.default_radio1.ieee80211r='1'

iw list

Wiphy phy1
        max # scan SSIDs: 4
        max scan IEs length: 2257 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short long limit: 2
        Coverage class: 0 (up to 0m)
        Available Antennas: TX 0 RX 0
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * AP/VLAN
                 * monitor
                 * mesh point
        Band 1:
                Capabilities: 0x2fe
                        HT20/HT40
                        SM Power Save disabled
                        RX Greenfield
                        RX HT20 SGI
                        RX HT40 SGI
                        TX STBC
                        RX STBC 2-streams
                        Max AMSDU length: 3839 bytes
                        No DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 2 usec (0x04)
                HT TX/RX MCS rate indexes supported: 0-15, 32
                Frequencies:
                        * 2412 MHz [1] (30.0 dBm)
                        * 2417 MHz [2] (30.0 dBm)
                        * 2422 MHz [3] (30.0 dBm)
                        * 2427 MHz [4] (30.0 dBm)
                        * 2432 MHz [5] (30.0 dBm)
                        * 2437 MHz [6] (30.0 dBm)
                        * 2442 MHz [7] (30.0 dBm)
                        * 2447 MHz [8] (30.0 dBm)
                        * 2452 MHz [9] (30.0 dBm)
                        * 2457 MHz [10] (30.0 dBm)
                        * 2462 MHz [11] (30.0 dBm)
                        * 2467 MHz [12] (disabled)
                        * 2472 MHz [13] (disabled)
                        * 2484 MHz [14] (disabled)
        valid interface combinations:
                 * #{ managed, AP, mesh point } <= 8,
                   total <= 8, #channels <= 1
        HT Capability overrides:
                 * MCS: ff ff ff ff ff ff ff ff ff ff
                 * maximum A-MSDU length
                 * supported channel width
                 * short GI for 40 MHz
                 * max A-MPDU length exponent
                 * min MPDU start spacing
        Supported extended features:
                * [ RRM ]: RRM
                * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
                * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211
Wiphy phy0
        max # scan SSIDs: 4
        max scan IEs length: 2243 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Available Antennas: TX 0x1 RX 0x1
        Configured Antennas: TX 0x1 RX 0x1
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * AP/VLAN
                 * monitor
                 * mesh point
        Band 1:
                Capabilities: 0x17e
                        HT20/HT40
                        SM Power Save disabled
                        RX Greenfield
                        RX HT20 SGI
                        RX HT40 SGI
                        RX STBC 1-stream
                        Max AMSDU length: 3839 bytes
                        No DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 4 usec (0x05)
                HT TX/RX MCS rate indexes supported: 0-7
                Frequencies:
                        * 2412 MHz [1] (30.0 dBm)
                        * 2417 MHz [2] (30.0 dBm)
                        * 2422 MHz [3] (30.0 dBm)
                        * 2427 MHz [4] (30.0 dBm)
                        * 2432 MHz [5] (30.0 dBm)
                        * 2437 MHz [6] (30.0 dBm)
                        * 2442 MHz [7] (30.0 dBm)
                        * 2447 MHz [8] (30.0 dBm)
                        * 2452 MHz [9] (30.0 dBm)
                        * 2457 MHz [10] (30.0 dBm)
                        * 2462 MHz [11] (30.0 dBm)
                        * 2467 MHz [12] (disabled)
                        * 2472 MHz [13] (disabled)
                        * 2484 MHz [14] (disabled)
        Band 2:
                Capabilities: 0x17e
                        HT20/HT40
                        SM Power Save disabled
                        RX Greenfield
                        RX HT20 SGI
                        RX HT40 SGI
                        RX STBC 1-stream
                        Max AMSDU length: 3839 bytes
                        No DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 4 usec (0x05)
                HT TX/RX MCS rate indexes supported: 0-7
                VHT Capabilities (0x31800120):
                        Max MPDU length: 3895
                        Supported Channel Width: neither 160 nor 80+80
                        short GI (80 MHz)
                        RX antenna pattern consistency
                        TX antenna pattern consistency
                VHT RX MCS set:
                        1 streams: MCS 0-7
                        2 streams: not supported
                        3 streams: not supported
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT RX highest supported: 0 Mbps
                VHT TX MCS set:
                        1 streams: MCS 0-7
                        2 streams: not supported
                        3 streams: not supported
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT TX highest supported: 0 Mbps
                Frequencies:
                        * 5180 MHz [36] (11.0 dBm)
                        * 5200 MHz [40] (11.0 dBm)
                        * 5220 MHz [44] (10.0 dBm)
                        * 5240 MHz [48] (10.0 dBm)
                        * 5260 MHz [52] (10.0 dBm) (radar detection)
                        * 5280 MHz [56] (10.0 dBm) (radar detection)
                        * 5300 MHz [60] (10.0 dBm) (radar detection)
                        * 5320 MHz [64] (10.0 dBm) (radar detection)
                        * 5500 MHz [100] (11.0 dBm) (radar detection)
                        * 5520 MHz [104] (11.0 dBm) (radar detection)
                        * 5540 MHz [108] (11.0 dBm) (radar detection)
                        * 5560 MHz [112] (11.0 dBm) (radar detection)
                        * 5580 MHz [116] (11.0 dBm) (radar detection)
                        * 5600 MHz [120] (11.0 dBm) (radar detection)
                        * 5620 MHz [124] (11.0 dBm) (radar detection)
                        * 5640 MHz [128] (11.0 dBm) (radar detection)
                        * 5660 MHz [132] (11.0 dBm) (radar detection)
                        * 5680 MHz [136] (11.0 dBm) (radar detection)
                        * 5700 MHz [140] (11.0 dBm) (radar detection)
                        * 5745 MHz [149] (11.0 dBm)
                        * 5765 MHz [153] (11.0 dBm)
                        * 5785 MHz [157] (12.0 dBm)
                        * 5805 MHz [161] (12.0 dBm)
                        * 5825 MHz [165] (12.0 dBm)
        valid interface combinations:
                 * #{ IBSS } <= 1, #{ managed, AP, mesh point } <= 8,
                   total <= 8, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz, 80 MHz }

        HT Capability overrides:
                 * MCS: ff ff ff ff ff ff ff ff ff ff
                 * maximum A-MSDU length
                 * supported channel width
                 * short GI for 40 MHz
                 * max A-MPDU length exponent
                 * min MPDU start spacing
        Supported extended features:
                * [ VHT_IBSS ]: VHT-IBSS
                * [ RRM ]: RRM
                * [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
                * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211
                * [ TXQS ]: FQ-CoDel-enabled intermediate TXQs

iw dev

phy#1
        Interface wlan1
                ifindex 7
                wdev 0x100000002
                addr 18:a6:f7:XX:XX:XX
                type AP
                txpower 30.00 dBm
phy#0
        Interface wlan0
                ifindex 8
                wdev 0x2
                addr 18:a6:f7:XX:XX:XX
                ssid CENZURA
                type AP
                channel 44 (5220 MHz), width: 80 MHz, center1: 5210 MHz
                txpower 10.00 dBm
                multicast TXQ:
                        qsz-byt qsz-pkt flows   drops   marks   overlmt hashcol tx-bytes  tx-packets
                        0       0       0       0       0       0       0       00

MikroTik RouterOS to życie

Cezary · 2021-09-08 18:09:10

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,872

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

I jeszcze pokaż

wifi
(poczekaj z 5s)
logread

Na początek - kompletnie wywal wszystkie śmieci które masz w konfigu:

wireless.default_radio1.dtim_period='10'
wireless.default_radio1.ft_over_ds='0'
wireless.default_radio1.ieee80211w='1'
wireless.default_radio1.wpa_disable_eapol_key_retries='1'
wireless.default_radio1.mobility_domain='7420'
wireless.default_radio1.ft_psk_generate_local='1'
wireless.default_radio1.ieee80211r='1'

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

ksx4system · 2021-09-08 18:24:45

ksx4system
Użytkownik
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2021-09-08
Posty: 15

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

logread

Wed Sep  8 17:36:53 2021 kern.notice kernel: [    0.000000] Linux version 4.14.241 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11364-ef56c85848)) #0 Thu Jul 29 19:50:28 2021
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] Board has DDR2
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] Analog PMU set to hw control
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] Digital PMU set to hw control
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] MIPS: machine is TP-Link Archer C2 v1
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] Determined physical RAM map:
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000]  memory: 04000000 @ 00000000 (usable)
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Wed Sep  8 17:36:53 2021 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Wed Sep  8 17:36:53 2021 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] Zone ranges:
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] Movable zone start for each node
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] Early memory node ranges
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.000000] On node 0 totalpages: 16384
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 804845f0, node_mem_map 81000040
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.000000]   Normal zone: 128 pages used for memmap
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
Wed Sep  8 17:36:53 2021 kern.notice kernel: [    0.000000] random: get_random_bytes called from 0x80485740 with crng_init=0
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16256
Wed Sep  8 17:36:53 2021 kern.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] Writing ErrCtl register=00012ff1
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] Readback ErrCtl register=00012ff1
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] Memory: 58804K/65536K available (3930K kernel code, 185K rwdata, 504K rodata, 1196K init, 215K bss, 6732K reserved, 0K cma-reserved)
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] NR_IRQS: 256
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] CPU Clock: 580MHz
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] systick: enable autosleep mode
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] systick: running - mult: 214748, shift: 32
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.000011] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.007619] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.073559] pid_max: default: 32768 minimum: 301
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.078276] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.084662] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.098007] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.107555] futex hash table entries: 256 (order: -1, 3072 bytes)
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.113525] pinctrl core: initialized pinctrl subsystem
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.119886] NET: Registered protocol family 16
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.605023] PCI host bridge /pcie@10140000 ranges:
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.609645]  MEM 0x0000000020000000..0x000000002fffffff
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.614688]   IO 0x0000000010160000..0x000000001016ffff
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.637801] rt2880_gpio 10000600.gpio: registering 24 gpios
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.643263] rt2880_gpio 10000600.gpio: registering 24 irq handlers
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.649592] rt2880_gpio 10000638.gpio: registering 16 gpios
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.655016] rt2880_gpio 10000638.gpio: registering 16 irq handlers
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.661315] rt2880_gpio 10000660.gpio: registering 32 gpios
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.666738] rt2880_gpio 10000660.gpio: registering 32 irq handlers
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.673033] rt2880_gpio 10000688.gpio: registering 1 gpios
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.678371] rt2880_gpio 10000688.gpio: registering 1 irq handlers
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.685126] PCI host bridge to bus 0000:00
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.689107] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.695724] pci_bus 0000:00: root bus resource [io  0x10160000-0x1016ffff]
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.702418] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.708995] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.716745] pci 0000:00:00.0: [1814:0801] type 01 class 0x060400
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.716788] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.716802] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.716887] pci 0000:00:00.0: supports D1
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.716899] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.717180] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.725078] pci 0000:01:00.0: [14c3:7650] type 00 class 0x028000
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.725135] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.725283] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.725548] pci 0000:01:00.1: [14c3:8650] type 00 class 0x0d1100
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.725599] pci 0000:01:00.1: reg 0x10: [mem 0x00000000-0x000fffff]
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.725745] pci 0000:01:00.1: supports D1
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.725755] pci 0000:01:00.1: PME# supported from D0 D1 D3hot D3cold
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.725991] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.726010] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.726062] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.732481] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.739191] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff]
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.745800] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.752381] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff]
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.758996] pci 0000:01:00.1: BAR 0: assigned [mem 0x20100000-0x201fffff]
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.765565] pci 0000:00:00.0: PCI bridge to [bus 01]
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.770403] pci 0000:00:00.0:   bridge window [mem 0x20000000-0x201fffff]
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.782453] clocksource: Switched to clocksource systick
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.788803] NET: Registered protocol family 2
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.793242] IP idents hash table entries: 2048 (order: 2, 16384 bytes)
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.800301] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.807088] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.813233] TCP: Hash tables configured (established 1024 bind 1024)
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.819520] UDP hash table entries: 256 (order: 0, 4096 bytes)
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.825191] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.831473] NET: Registered protocol family 1
Wed Sep  8 17:36:53 2021 kern.debug kernel: [    0.835762] PCI: CLS 0 bytes, default 32
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.838496] rt-timer 10000100.timer: maximum frequency is 1220Hz
Wed Sep  8 17:36:53 2021 kern.warn kernel: [    0.845237] Crashlog allocated RAM at address 0x3f00000
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.852001] workingset: timestamp_bits=30 max_order=14 bucket_order=0
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.864418] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.870019] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.890279] io scheduler noop registered
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.894091] io scheduler deadline registered (default)
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.899983] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.909275] console [ttyS0] disabled
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.912792] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.922391] console [ttyS0] enabled
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.929480] bootconsole [early0] disabled
Wed Sep  8 17:36:53 2021 kern.warn kernel: [    0.945570] spi spi0.0: force spi mode3
Wed Sep  8 17:36:53 2021 kern.info kernel: [    0.961852] m25p80 spi0.0: s25fl064k (8192 Kbytes)
Wed Sep  8 17:36:53 2021 kern.notice kernel: [    0.966827] 6 fixed-partitions partitions found on MTD device spi0.0
Wed Sep  8 17:36:53 2021 kern.notice kernel: [    0.973328] Creating 6 MTD partitions on "spi0.0":
Wed Sep  8 17:36:53 2021 kern.notice kernel: [    0.978240] 0x000000000000-0x000000020000 : "u-boot"
Wed Sep  8 17:36:53 2021 kern.notice kernel: [    0.984255] 0x000000020000-0x0000007c0000 : "firmware"
Wed Sep  8 17:36:53 2021 kern.notice kernel: [    0.992894] 2 tplink-fw partitions found on MTD device firmware
Wed Sep  8 17:36:53 2021 kern.notice kernel: [    0.998947] Creating 2 MTD partitions on "firmware":
Wed Sep  8 17:36:53 2021 kern.notice kernel: [    1.004070] 0x000000000000-0x00000017f88f : "kernel"
Wed Sep  8 17:36:53 2021 kern.notice kernel: [    1.010057] 0x00000017f890-0x0000007a0000 : "rootfs"
Wed Sep  8 17:36:53 2021 kern.notice kernel: [    1.015984] mtd: device 3 (rootfs) set to be root filesystem
Wed Sep  8 17:36:53 2021 kern.notice kernel: [    1.023374] 1 squashfs-split partitions found on MTD device rootfs
Wed Sep  8 17:36:53 2021 kern.notice kernel: [    1.029706] 0x0000003f0000-0x0000007a0000 : "rootfs_data"
Wed Sep  8 17:36:53 2021 kern.notice kernel: [    1.036196] 0x0000007c0000-0x0000007d0000 : "config"
Wed Sep  8 17:36:53 2021 kern.notice kernel: [    1.042125] 0x0000007d0000-0x0000007e0000 : "rom"
Wed Sep  8 17:36:53 2021 kern.notice kernel: [    1.047877] 0x0000007e0000-0x0000007f0000 : "romfile"
Wed Sep  8 17:36:53 2021 kern.notice kernel: [    1.053977] 0x0000007f0000-0x000000800000 : "radio"
Wed Sep  8 17:36:53 2021 kern.info kernel: [    1.060623] libphy: Fixed MDIO Bus: probed
Wed Sep  8 17:36:53 2021 kern.info kernel: [    1.076078] gsw: setting port4 to ephy mode
Wed Sep  8 17:36:53 2021 kern.info kernel: [    1.080678] libphy: mdio: probed
Wed Sep  8 17:36:53 2021 kern.info kernel: [    1.084076] mtk_soc_eth 10100000.ethernet: using fixed link parameters
Wed Sep  8 17:36:53 2021 kern.info kernel: [    1.090819] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
Wed Sep  8 17:36:53 2021 kern.info kernel: [    1.097542] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
Wed Sep  8 17:36:53 2021 kern.info kernel: [    1.106559] rt2880_wdt 10000120.watchdog: Initialized
Wed Sep  8 17:36:53 2021 kern.info kernel: [    1.113193] NET: Registered protocol family 10
Wed Sep  8 17:36:53 2021 kern.info kernel: [    1.121907] Segment Routing with IPv6
Wed Sep  8 17:36:53 2021 kern.info kernel: [    1.125844] NET: Registered protocol family 17
Wed Sep  8 17:36:53 2021 kern.info kernel: [    1.130430] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Wed Sep  8 17:36:53 2021 kern.info kernel: [    1.143681] 8021q: 802.1Q VLAN Support v1.8
Wed Sep  8 17:36:53 2021 kern.info kernel: [    1.164009] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Wed Sep  8 17:36:53 2021 kern.info kernel: [    1.177756] Freeing unused kernel memory: 1196K
Wed Sep  8 17:36:53 2021 kern.warn kernel: [    1.182415] This architecture does not have kernel memory protection.
Wed Sep  8 17:36:53 2021 kern.notice kernel: [    2.692417] random: fast init done
Wed Sep  8 17:36:53 2021 user.info kernel: [    2.934624] init: Console is alive
Wed Sep  8 17:36:53 2021 user.info kernel: [    2.938355] init: - watchdog -
Wed Sep  8 17:36:53 2021 user.info kernel: [    4.959867] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Wed Sep  8 17:36:53 2021 kern.info kernel: [    5.046479] usbcore: registered new interface driver usbfs
Wed Sep  8 17:36:53 2021 kern.info kernel: [    5.052160] usbcore: registered new interface driver hub
Wed Sep  8 17:36:53 2021 kern.info kernel: [    5.057752] usbcore: registered new device driver usb
Wed Sep  8 17:36:53 2021 kern.info kernel: [    5.069277] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Wed Sep  8 17:36:53 2021 kern.info kernel: [    5.077696] ehci-platform: EHCI generic platform driver
Wed Sep  8 17:36:53 2021 kern.info kernel: [    5.093485] phy phy-usbphy.0: remote usb device wakeup disabled
Wed Sep  8 17:36:53 2021 kern.info kernel: [    5.099535] phy phy-usbphy.0: UTMI 16bit 30MHz
Wed Sep  8 17:36:53 2021 kern.info kernel: [    5.104104] ehci-platform 101c0000.ehci: EHCI Host Controller
Wed Sep  8 17:36:53 2021 kern.info kernel: [    5.110014] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
Wed Sep  8 17:36:53 2021 kern.info kernel: [    5.118232] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
Wed Sep  8 17:36:53 2021 kern.info kernel: [    5.134017] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
Wed Sep  8 17:36:53 2021 kern.info kernel: [    5.141425] hub 1-0:1.0: USB hub found
Wed Sep  8 17:36:53 2021 kern.info kernel: [    5.145732] hub 1-0:1.0: 1 port detected
Wed Sep  8 17:36:53 2021 kern.info kernel: [    5.153017] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Wed Sep  8 17:36:53 2021 kern.info kernel: [    5.161000] ohci-platform: OHCI generic platform driver
Wed Sep  8 17:36:53 2021 kern.info kernel: [    5.166754] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
Wed Sep  8 17:36:53 2021 kern.info kernel: [    5.173718] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
Wed Sep  8 17:36:53 2021 kern.info kernel: [    5.181967] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
Wed Sep  8 17:36:53 2021 kern.info kernel: [    5.215536] hub 2-0:1.0: USB hub found
Wed Sep  8 17:36:53 2021 kern.info kernel: [    5.219817] hub 2-0:1.0: 1 port detected
Wed Sep  8 17:36:53 2021 user.info kernel: [    5.228931] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Wed Sep  8 17:36:53 2021 user.info kernel: [    5.240572] init: - preinit -
Wed Sep  8 17:36:53 2021 kern.info kernel: [    5.394401] usb 1-1: new high-speed USB device number 2 using ehci-platform
Wed Sep  8 17:36:53 2021 kern.info kernel: [    7.092128] mtk_soc_eth 10100000.ethernet eth0: port 5 link up (1000Mbps/Full duplex)
Wed Sep  8 17:36:53 2021 kern.info kernel: [    7.100908] 8021q: adding VLAN 0 to HW filter on device eth0
Wed Sep  8 17:36:53 2021 kern.notice kernel: [    7.252243] random: procd: uninitialized urandom read (4 bytes read)
Wed Sep  8 17:36:53 2021 kern.notice kernel: [    8.944101] jffs2: notice: (438) jffs2_build_xattr_subsystem: complete building xattr subsystem, 6 of xdatum (3 unchecked, 3 orphan) and 30 of xref (3 dead, 0 orphan) found.
Wed Sep  8 17:36:53 2021 user.info kernel: [    8.997708] mount_root: loading kmods from internal overlay
Wed Sep  8 17:36:53 2021 user.info kernel: [   10.299518] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
Wed Sep  8 17:36:53 2021 kern.notice kernel: [   11.318305] SCSI subsystem initialized
Wed Sep  8 17:36:53 2021 kern.info kernel: [   11.401409] uhci_hcd: USB Universal Host Controller Interface driver
Wed Sep  8 17:36:53 2021 kern.info kernel: [   11.467048] usb-storage 1-1:1.0: USB Mass Storage device detected
Wed Sep  8 17:36:53 2021 kern.info kernel: [   11.473767] scsi host0: usb-storage 1-1:1.0
Wed Sep  8 17:36:53 2021 kern.info kernel: [   11.478616] usbcore: registered new interface driver usb-storage
Wed Sep  8 17:36:53 2021 user.info kernel: [   11.486488] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
Wed Sep  8 17:36:53 2021 user.info kernel: [   12.591640] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Wed Sep  8 17:36:53 2021 user.info kernel: [   12.606116] block: extroot: device not present, retrying in 15 seconds
Wed Sep  8 17:36:53 2021 kern.notice kernel: [   16.110179] scsi 0:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 4
Wed Sep  8 17:36:53 2021 kern.notice kernel: [   16.146434] sd 0:0:0:0: [sda] 30322688 512-byte logical blocks: (15.5 GB/14.5 GiB)
Wed Sep  8 17:36:53 2021 kern.notice kernel: [   16.165388] sd 0:0:0:0: [sda] Write Protect is off
Wed Sep  8 17:36:53 2021 kern.debug kernel: [   16.170352] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
Wed Sep  8 17:36:53 2021 kern.err kernel: [   16.179148] sd 0:0:0:0: [sda] No Caching mode page found
Wed Sep  8 17:36:53 2021 kern.err kernel: [   16.184606] sd 0:0:0:0: [sda] Assuming drive cache: write through
Wed Sep  8 17:36:53 2021 kern.info kernel: [   16.259989]  sda: sda1
Wed Sep  8 17:36:53 2021 kern.notice kernel: [   16.297026] sd 0:0:0:0: [sda] Attached SCSI removable disk
Wed Sep  8 17:36:53 2021 kern.info kernel: [   24.949485] EXT4-fs (sda1): recovery complete
Wed Sep  8 17:36:53 2021 kern.info kernel: [   24.955897] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
Wed Sep  8 17:36:53 2021 user.info kernel: [   25.003274] mount_root: switched to extroot
Wed Sep  8 17:36:53 2021 user.warn kernel: [   25.011949] urandom-seed: Seeding with /etc/urandom.seed
Wed Sep  8 17:36:53 2021 kern.info kernel: [   25.278650] mtk_soc_eth 10100000.ethernet eth0: port 5 link down
Wed Sep  8 17:36:53 2021 user.info kernel: [   25.297250] procd: - early -
Wed Sep  8 17:36:53 2021 user.info kernel: [   25.300318] procd: - watchdog -
Wed Sep  8 17:36:53 2021 user.info kernel: [   25.963807] procd: - watchdog -
Wed Sep  8 17:36:53 2021 user.info kernel: [   25.967425] procd: - ubus -
Wed Sep  8 17:36:53 2021 kern.notice kernel: [   26.491160] random: ubusd: uninitialized urandom read (4 bytes read)
Wed Sep  8 17:36:53 2021 kern.notice kernel: [   26.514019] random: ubusd: uninitialized urandom read (4 bytes read)
Wed Sep  8 17:36:53 2021 kern.notice kernel: [   26.527103] random: ubusd: uninitialized urandom read (4 bytes read)
Wed Sep  8 17:36:53 2021 user.info kernel: [   26.777394] procd: - init -
Wed Sep  8 17:36:53 2021 kern.notice kernel: [   27.033541] random: crng init done
Wed Sep  8 17:36:53 2021 kern.notice kernel: [   27.037032] random: 6 urandom warning(s) missed due to ratelimiting
Wed Sep  8 17:36:53 2021 user.info kernel: [   27.768490] kmodloader: loading kernel modules from /etc/modules.d/*
Wed Sep  8 17:36:53 2021 kern.info kernel: [   27.942240] ip6_tables: (C) 2000-2006 Netfilter Core Team
Wed Sep  8 17:36:53 2021 kern.info kernel: [   27.972447] rtl8367b rtl8367rb: using MDIO bus 'mdio'
Wed Sep  8 17:36:53 2021 kern.info kernel: [   27.978617] rtl8367b rtl8367rb: RTL8367RB chip found
Wed Sep  8 17:36:53 2021 user.err kernel: [   28.083927] urngd: jent-rng init failed, err: 2
Wed Sep  8 17:36:53 2021 kern.info kernel: [   29.178370] libphy: rtl8367rb: probed
Wed Sep  8 17:36:53 2021 kern.info kernel: [   29.192660] Loading modules backported from Linux version v4.19.193-0-g1722257b8ece
Wed Sep  8 17:36:53 2021 kern.info kernel: [   29.200508] Backport generated by backports.git v4.19.193-1-0-gaa2cc8ea
Wed Sep  8 17:36:53 2021 kern.info kernel: [   29.210540] ip_tables: (C) 2000-2006 Netfilter Core Team
Wed Sep  8 17:36:53 2021 kern.info kernel: [   29.227602] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
Wed Sep  8 17:36:53 2021 kern.info kernel: [   29.307016] xt_time: kernel timezone is -0000
Wed Sep  8 17:36:53 2021 kern.info kernel: [   29.385961] PPP generic driver version 2.4.2
Wed Sep  8 17:36:53 2021 kern.info kernel: [   29.393366] NET: Registered protocol family 24
Wed Sep  8 17:36:53 2021 kern.err kernel: [   29.412674] mt76x0e 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4
Wed Sep  8 17:36:53 2021 kern.info kernel: [   29.419159] mt76x0e 0000:01:00.0: ASIC revision: 76100002
Wed Sep  8 17:36:53 2021 kern.info kernel: [   29.426540] mt76x0e 0000:01:00.0: Firmware Version: 0.1.00
Wed Sep  8 17:36:53 2021 kern.info kernel: [   29.517494] mt76x0e 0000:01:00.0: EEPROM ver:02 fae:00
Wed Sep  8 17:36:53 2021 kern.debug kernel: [   29.527039] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Wed Sep  8 17:36:53 2021 kern.info kernel: [   29.576692] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "radio"
Wed Sep  8 17:36:53 2021 kern.info kernel: [   29.583908] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected
Wed Sep  8 17:36:53 2021 kern.info kernel: [   29.670337] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 7620 detected
Wed Sep  8 17:36:53 2021 kern.debug kernel: [   29.678237] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Wed Sep  8 17:36:53 2021 user.info kernel: [   29.684659] kmodloader: done loading kernel modules from /etc/modules.d/*
Wed Sep  8 17:36:55 2021 authpriv.info dropbear[968]: Not backgrounding
Wed Sep  8 17:36:58 2021 user.notice : Added device handler type: 8021ad
Wed Sep  8 17:36:58 2021 user.notice : Added device handler type: 8021q
Wed Sep  8 17:36:58 2021 user.notice : Added device handler type: macvlan
Wed Sep  8 17:36:58 2021 user.notice : Added device handler type: veth
Wed Sep  8 17:36:58 2021 user.notice : Added device handler type: bridge
Wed Sep  8 17:36:58 2021 user.notice : Added device handler type: Network device
Wed Sep  8 17:36:58 2021 user.notice : Added device handler type: tunnel
Wed Sep  8 17:37:02 2021 kern.notice kernel: [   40.012669] jffs2: notice: (1029) jffs2_build_xattr_subsystem: complete building xattr subsystem, 6 of xdatum (3 unchecked, 3 orphan) and 30 of xref (3 dead, 0 orphan) found.
Wed Sep  8 17:37:02 2021 daemon.warn netifd: You have delegated IPv6-prefixes but haven't assigned them to any interface. Did you forget to set option ip6assign on your lan-interfaces?
Wed Sep  8 17:37:02 2021 kern.info kernel: [   40.285061] mtk_soc_eth 10100000.ethernet eth0: port 5 link up (1000Mbps/Full duplex)
Wed Sep  8 17:37:02 2021 kern.info kernel: [   40.293769] 8021q: adding VLAN 0 to HW filter on device eth0
Wed Sep  8 17:37:02 2021 kern.info kernel: [   40.342853] device eth0 entered promiscuous mode
Wed Sep  8 17:37:02 2021 kern.info kernel: [   40.348005] br-lan: port 1(eth0.2) entered blocking state
Wed Sep  8 17:37:02 2021 kern.info kernel: [   40.353627] br-lan: port 1(eth0.2) entered disabled state
Wed Sep  8 17:37:02 2021 kern.info kernel: [   40.359481] device eth0.2 entered promiscuous mode
Wed Sep  8 17:37:02 2021 kern.info kernel: [   40.527345] br-lan: port 1(eth0.2) entered blocking state
Wed Sep  8 17:37:02 2021 kern.info kernel: [   40.532941] br-lan: port 1(eth0.2) entered forwarding state
Wed Sep  8 17:37:02 2021 kern.info kernel: [   40.538793] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Wed Sep  8 17:37:02 2021 daemon.notice netifd: Interface 'lan' is enabled
Wed Sep  8 17:37:02 2021 daemon.notice netifd: Interface 'loopback' is enabled
Wed Sep  8 17:37:02 2021 daemon.notice netifd: Interface 'loopback' is setting up now
Wed Sep  8 17:37:02 2021 daemon.notice netifd: Interface 'loopback' is now up
Wed Sep  8 17:37:02 2021 daemon.notice netifd: bridge 'br-lan' link is up
Wed Sep  8 17:37:03 2021 daemon.notice netifd: Interface 'lan' has link connectivity
Wed Sep  8 17:37:03 2021 daemon.notice netifd: Interface 'lan' is setting up now
Wed Sep  8 17:37:03 2021 daemon.notice netifd: Network device 'eth0' link is up
Wed Sep  8 17:37:03 2021 daemon.notice netifd: VLAN 'eth0.2' link is up
Wed Sep  8 17:37:03 2021 daemon.notice netifd: Network device 'lo' link is up
Wed Sep  8 17:37:03 2021 daemon.notice netifd: Interface 'loopback' has link connectivity
Wed Sep  8 17:37:03 2021 kern.info kernel: [   41.361792] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Wed Sep  8 17:37:03 2021 daemon.notice netifd: lan (1142): udhcpc: started, v1.30.1
Wed Sep  8 17:37:04 2021 daemon.notice netifd: lan (1142): udhcpc: sending discover
Wed Sep  8 17:37:04 2021 daemon.notice netifd: lan (1142): udhcpc: performing DHCP renew
Wed Sep  8 17:37:04 2021 daemon.notice netifd: lan (1142): udhcpc: sending discover
Wed Sep  8 17:37:04 2021 daemon.notice netifd: lan (1142): udhcpc: sending select for 172.20.20.253
Wed Sep  8 17:37:04 2021 daemon.notice netifd: lan (1142): udhcpc: lease of 172.20.20.253 obtained, lease time 10800
Wed Sep  8 17:37:05 2021 daemon.notice netifd: Interface 'lan' is now up
Wed Sep  8 17:37:05 2021 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Wed Sep  8 17:37:05 2021 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/radvd
Wed Sep  8 17:37:05 2021 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Wed Sep  8 17:37:06 2021 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Wed Sep  8 17:37:06 2021 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Wed Sep  8 17:37:06 2021 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Wed Sep  8 17:37:06 2021 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Wed Sep  8 17:37:06 2021 user.notice mac80211: Failed command: iw phy phy1 set antenna 0xffffffff 0xffffffff
Wed Sep  8 17:37:06 2021 daemon.notice netifd: radio1 (1101): command failed: Not supported (-122)
Wed Sep  8 17:37:06 2021 user.notice mac80211: Failed command: iw phy phy1 set distance 0
Wed Sep  8 17:37:06 2021 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Wed Sep  8 17:37:06 2021 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff
Wed Sep  8 17:37:07 2021 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Wed Sep  8 17:37:07 2021 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Wed Sep  8 17:37:08 2021 kern.info kernel: [   44.975401] ieee80211 phy1: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration start
Wed Sep  8 17:37:08 2021 kern.info kernel: [   44.984254] ieee80211 phy1: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration end
Wed Sep  8 17:37:08 2021 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Wed Sep  8 17:37:09 2021 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Wed Sep  8 17:37:09 2021 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Wed Sep  8 17:37:09 2021 daemon.notice procd: /etc/rc.d/S96led: setting up led lan
Wed Sep  8 17:37:09 2021 daemon.notice procd: /etc/rc.d/S96led: setting up led wan
Wed Sep  8 17:37:10 2021 daemon.info procd: - init complete -
Wed Sep  8 17:37:12 2021 kern.info kernel: [   49.664455] ieee80211 phy1: rt2800_loft_iq_calibration: Info - LOFT Calibration Done!
Wed Sep  8 17:37:12 2021 kern.info kernel: [   49.676439] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Start!
Wed Sep  8 17:37:12 2021 kern.info kernel: [   49.697784] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Done! CH = 0, (gain= 1, phase=3d)
Wed Sep  8 17:37:12 2021 kern.info kernel: [   49.708032] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Start!
Wed Sep  8 17:37:12 2021 kern.info kernel: [   49.729361] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Done! CH = 1, (gain= 0, phase= 1)
Wed Sep  8 17:37:12 2021 kern.info kernel: [   49.738706] ieee80211 phy1: rt2800_loft_iq_calibration: Info - TX IQ Calibration Done!
Wed Sep  8 17:37:12 2021 kern.info kernel: [   49.775685] ieee80211 phy1: rt2800_rxiq_calibration: Info - RXIQ G_imb=0, Ph_rx=1
Wed Sep  8 17:37:12 2021 kern.info kernel: [   49.793592] ieee80211 phy1: rt2800_rxiq_calibration: Info - RXIQ G_imb=1, Ph_rx=-5
Wed Sep  8 18:56:40 2021 kern.info kernel: [   49.920760] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Wed Sep  8 18:56:40 2021 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Wed Sep  8 18:56:40 2021 kern.info kernel: [   50.142922] br-lan: port 2(wlan1) entered blocking state
Wed Sep  8 18:56:40 2021 kern.info kernel: [   50.148439] br-lan: port 2(wlan1) entered disabled state
Wed Sep  8 18:56:40 2021 kern.info kernel: [   50.154298] device wlan1 entered promiscuous mode
Wed Sep  8 18:56:40 2021 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Sep  8 18:56:40 2021 daemon.err hostapd: Using interface wlan1 with hwaddr 18:a6:f7:XX:XX:XX and ssid "CENZURA"
Wed Sep  8 18:56:40 2021 kern.info kernel: [   50.257719] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Wed Sep  8 18:56:40 2021 kern.info kernel: [   50.286594] br-lan: port 3(wlan0) entered blocking state
Wed Sep  8 18:56:40 2021 kern.info kernel: [   50.292032] br-lan: port 3(wlan0) entered disabled state
Wed Sep  8 18:56:40 2021 kern.info kernel: [   50.297919] device wlan0 entered promiscuous mode
Wed Sep  8 18:56:40 2021 kern.info kernel: [   50.303030] br-lan: port 3(wlan0) entered blocking state
Wed Sep  8 18:56:40 2021 kern.info kernel: [   50.308465] br-lan: port 3(wlan0) entered forwarding state
Wed Sep  8 18:56:40 2021 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Sep  8 18:56:40 2021 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->HT_SCAN
Wed Sep  8 18:56:40 2021 daemon.notice hostapd: Switch own primary and secondary channel to get secondary channel with no Beacons from other BSSes
Wed Sep  8 18:56:40 2021 daemon.err hostapd: Using interface wlan0 with hwaddr 18:a6:f7:XX:XX:XX and ssid "CENZURA"
Wed Sep  8 18:56:41 2021 kern.info kernel: [   51.002428] br-lan: port 3(wlan0) entered disabled state
Wed Sep  8 18:56:41 2021 kern.info kernel: [   51.280627] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Wed Sep  8 18:56:41 2021 kern.info kernel: [   51.287369] br-lan: port 2(wlan1) entered blocking state
Wed Sep  8 18:56:41 2021 kern.info kernel: [   51.292852] br-lan: port 2(wlan1) entered forwarding state
Wed Sep  8 18:56:41 2021 daemon.err hostapd: Interface initialization failed
Wed Sep  8 18:56:41 2021 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->DISABLED
Wed Sep  8 18:56:41 2021 daemon.notice hostapd: wlan1: AP-DISABLED
Wed Sep  8 18:56:41 2021 daemon.notice hostapd: wlan1: interface state DISABLED->DISABLED
Wed Sep  8 18:56:41 2021 daemon.notice hostapd: wlan1: AP-DISABLED
Wed Sep  8 18:56:41 2021 daemon.notice hostapd: wlan1: CTRL-EVENT-TERMINATING
Wed Sep  8 18:56:41 2021 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan1 wasn't started
Wed Sep  8 18:56:41 2021 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Wed Sep  8 18:56:41 2021 kern.info kernel: [   51.313080] device wlan1 left promiscuous mode
Wed Sep  8 18:56:41 2021 kern.info kernel: [   51.317762] br-lan: port 2(wlan1) entered disabled state
Wed Sep  8 18:56:41 2021 daemon.notice hostapd: ELOOP: remaining socket: sock=22 eloop_data=0x77e6f330 user_data=0 handler=0x43c101
Wed Sep  8 18:56:41 2021 daemon.notice netifd: radio1 (1101): cat: can't open '/var/run/wifi-phy1.pid': No such file or directory
Wed Sep  8 18:56:41 2021 daemon.notice netifd: radio1 (1101): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process  path (/proc/exe)
Wed Sep  8 18:56:41 2021 daemon.notice netifd: radio1 (1101): Command failed: Invalid argument
Wed Sep  8 18:56:43 2021 kern.info kernel: [   51.564751] ieee80211 phy1: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration start
Wed Sep  8 18:56:43 2021 kern.info kernel: [   51.573490] ieee80211 phy1: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration end
Wed Sep  8 18:56:44 2021 kern.info kernel: [   53.912477] ieee80211 phy1: rt2800_loft_iq_calibration: Info - LOFT Calibration Done!
Wed Sep  8 18:56:44 2021 kern.info kernel: [   53.924466] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Start!
Wed Sep  8 18:56:44 2021 kern.info kernel: [   53.945837] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Done! CH = 0, (gain= f, phase=3d)
Wed Sep  8 18:56:44 2021 kern.info kernel: [   53.956090] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Start!
Wed Sep  8 18:56:44 2021 kern.info kernel: [   53.977406] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Done! CH = 1, (gain= f, phase=3e)
Wed Sep  8 18:56:44 2021 kern.info kernel: [   53.986771] ieee80211 phy1: rt2800_loft_iq_calibration: Info - TX IQ Calibration Done!
Wed Sep  8 18:56:44 2021 kern.info kernel: [   54.026445] ieee80211 phy1: rt2800_rxiq_calibration: Info - RXIQ G_imb=0, Ph_rx=1
Wed Sep  8 18:56:44 2021 kern.info kernel: [   54.044349] ieee80211 phy1: rt2800_rxiq_calibration: Info - RXIQ G_imb=1, Ph_rx=-5
Wed Sep  8 18:56:44 2021 kern.info kernel: [   54.060862] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Wed Sep  8 18:56:44 2021 kern.info kernel: [   54.104726] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Wed Sep  8 18:56:44 2021 kern.info kernel: [   54.111469] br-lan: port 3(wlan0) entered blocking state
Wed Sep  8 18:56:44 2021 kern.info kernel: [   54.116896] br-lan: port 3(wlan0) entered forwarding state
Wed Sep  8 18:56:44 2021 daemon.notice hostapd: wlan0: interface state HT_SCAN->ENABLED
Wed Sep  8 18:56:44 2021 daemon.notice hostapd: wlan0: AP-ENABLED
Wed Sep  8 18:56:44 2021 kern.info kernel: [   54.276494] br-lan: port 2(wlan1) entered blocking state
Wed Sep  8 18:56:44 2021 kern.info kernel: [   54.282007] br-lan: port 2(wlan1) entered disabled state
Wed Sep  8 18:56:44 2021 kern.info kernel: [   54.287810] device wlan1 entered promiscuous mode
Wed Sep  8 18:56:44 2021 daemon.notice netifd: Network device 'wlan0' link is up
Wed Sep  8 18:56:44 2021 daemon.notice netifd: lan (1142): udhcpc: performing DHCP renew
Wed Sep  8 18:56:44 2021 daemon.notice netifd: lan (1142): udhcpc: sending renew to 172.20.20.1
Wed Sep  8 18:56:44 2021 daemon.notice netifd: lan (1142): udhcpc: lease of 172.20.20.253 obtained, lease time 10800
Wed Sep  8 18:56:45 2021 daemon.notice netifd: lan (1142): udhcpc: performing DHCP renew
Wed Sep  8 18:56:45 2021 daemon.notice netifd: lan (1142): udhcpc: sending renew to 172.20.20.1
Wed Sep  8 18:56:45 2021 daemon.notice netifd: lan (1142): udhcpc: lease of 172.20.20.253 obtained, lease time 10800
Wed Sep  8 18:59:21 2021 authpriv.info dropbear[1654]: Child connection from 172.20.20.103:57740
Wed Sep  8 18:59:25 2021 authpriv.notice dropbear[1654]: Password auth succeeded for 'ksx4system' from 172.20.20.103:57740
Wed Sep  8 18:59:43 2021 authpriv.notice sudo: ksx4system : TTY=pts/0 ; PWD=/home/ksx4system ; USER=root ; COMMAND=/usr/bin/su
Wed Sep  8 18:59:43 2021 authpriv.info su[1664]: Successful su for root by root
Wed Sep  8 18:59:43 2021 authpriv.info su[1664]: + /dev/pts/0 root:root
Wed Sep  8 18:59:51 2021 authpriv.notice sudo: ksx4system : TTY=pts/0 ; PWD=/home/ksx4system ; USER=root ; COMMAND=/usr/bin/su
Wed Sep  8 18:59:51 2021 authpriv.info su[1666]: Successful su for root by root
Wed Sep  8 18:59:51 2021 authpriv.info su[1666]: + /dev/pts/0 root:root
Wed Sep  8 19:14:53 2021 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Wed Sep  8 19:14:53 2021 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Sep  8 19:14:53 2021 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Wed Sep  8 19:14:53 2021 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Wed Sep  8 19:14:53 2021 kern.info kernel: [  520.549160] device wlan0 left promiscuous mode
Wed Sep  8 19:14:53 2021 kern.info kernel: [  520.553895] br-lan: port 3(wlan0) entered disabled state
Wed Sep  8 19:14:53 2021 kern.info kernel: [  520.573125] br-lan: port 2(wlan1) entered disabled state
Wed Sep  8 19:14:53 2021 daemon.notice netifd: Network device 'wlan0' link is down
Wed Sep  8 19:14:53 2021 kern.info kernel: [  520.633579] device wlan1 left promiscuous mode
Wed Sep  8 19:14:53 2021 kern.info kernel: [  520.638166] br-lan: port 2(wlan1) entered disabled state
Wed Sep  8 19:14:53 2021 daemon.notice netifd: lan (1142): udhcpc: performing DHCP renew
Wed Sep  8 19:14:53 2021 daemon.notice netifd: lan (1142): udhcpc: sending renew to 172.20.20.1
Wed Sep  8 19:14:53 2021 daemon.notice netifd: lan (1142): udhcpc: lease of 172.20.20.253 obtained, lease time 10800
Wed Sep  8 19:14:54 2021 daemon.notice netifd: lan (1142): udhcpc: performing DHCP renew
Wed Sep  8 19:14:54 2021 daemon.notice netifd: lan (1142): udhcpc: sending renew to 172.20.20.1
Wed Sep  8 19:14:54 2021 daemon.notice netifd: lan (1142): udhcpc: lease of 172.20.20.253 obtained, lease time 10800
Wed Sep  8 19:14:54 2021 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff
Wed Sep  8 19:14:55 2021 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Wed Sep  8 19:14:55 2021 kern.info kernel: [  522.701051] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Wed Sep  8 19:14:55 2021 kern.info kernel: [  522.711737] br-lan: port 2(wlan0) entered blocking state
Wed Sep  8 19:14:55 2021 kern.info kernel: [  522.717277] br-lan: port 2(wlan0) entered disabled state
Wed Sep  8 19:14:55 2021 kern.info kernel: [  522.723070] device wlan0 entered promiscuous mode
Wed Sep  8 19:14:55 2021 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Sep  8 19:14:55 2021 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->HT_SCAN
Wed Sep  8 19:14:55 2021 daemon.notice hostapd: Switch own primary and secondary channel to get secondary channel with no Beacons from other BSSes
Wed Sep  8 19:14:55 2021 daemon.err hostapd: Using interface wlan0 with hwaddr 18:a6:f7:XX:XX:XX and ssid "CENZURA"
Wed Sep  8 19:14:55 2021 user.notice mac80211: Failed command: iw phy phy1 set antenna 0xffffffff 0xffffffff
Wed Sep  8 19:14:55 2021 daemon.notice netifd: radio1 (1729): command failed: Not supported (-122)
Wed Sep  8 19:14:55 2021 user.notice mac80211: Failed command: iw phy phy1 set distance 0
Wed Sep  8 19:14:56 2021 kern.info kernel: [  523.798303] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Wed Sep  8 19:14:56 2021 kern.info kernel: [  523.805081] br-lan: port 2(wlan0) entered blocking state
Wed Sep  8 19:14:56 2021 kern.info kernel: [  523.810584] br-lan: port 2(wlan0) entered forwarding state
Wed Sep  8 19:14:56 2021 daemon.notice hostapd: wlan0: interface state HT_SCAN->ENABLED
Wed Sep  8 19:14:56 2021 daemon.notice hostapd: wlan0: AP-ENABLED
Wed Sep  8 19:14:56 2021 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Wed Sep  8 19:14:58 2021 kern.info kernel: [  523.967997] ieee80211 phy1: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration start
Wed Sep  8 19:14:58 2021 kern.info kernel: [  523.976837] ieee80211 phy1: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration end
Wed Sep  8 19:14:59 2021 kern.info kernel: [  526.041352] ieee80211 phy1: rt2800_loft_iq_calibration: Info - LOFT Calibration Done!
Wed Sep  8 19:14:59 2021 kern.info kernel: [  526.053261] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Start!
Wed Sep  8 19:14:59 2021 kern.info kernel: [  526.074664] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Done! CH = 0, (gain= 0, phase=3d)
Wed Sep  8 19:14:59 2021 kern.info kernel: [  526.084917] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Start!
Wed Sep  8 19:14:59 2021 kern.info kernel: [  526.106232] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Done! CH = 1, (gain= f, phase=3e)
Wed Sep  8 19:14:59 2021 kern.info kernel: [  526.115596] ieee80211 phy1: rt2800_loft_iq_calibration: Info - TX IQ Calibration Done!
Wed Sep  8 19:14:59 2021 kern.info kernel: [  526.152963] ieee80211 phy1: rt2800_rxiq_calibration: Info - RXIQ G_imb=-1, Ph_rx=1
Wed Sep  8 19:14:59 2021 kern.info kernel: [  526.173629] ieee80211 phy1: rt2800_rxiq_calibration: Info - RXIQ G_imb=1, Ph_rx=-4
Wed Sep  8 19:14:59 2021 daemon.notice netifd: Network device 'wlan0' link is up
Wed Sep  8 19:14:59 2021 kern.info kernel: [  526.192158] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Wed Sep  8 19:14:59 2021 kern.info kernel: [  526.220119] br-lan: port 3(wlan1) entered blocking state
Wed Sep  8 19:14:59 2021 kern.info kernel: [  526.225557] br-lan: port 3(wlan1) entered disabled state
Wed Sep  8 19:14:59 2021 kern.info kernel: [  526.231449] device wlan1 entered promiscuous mode
Wed Sep  8 19:14:59 2021 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Sep  8 19:14:59 2021 daemon.err hostapd: Using interface wlan1 with hwaddr 18:a6:f7:XX:XX:XX and ssid "CENZURA"
Wed Sep  8 19:14:59 2021 daemon.notice netifd: lan (1142): udhcpc: performing DHCP renew
Wed Sep  8 19:14:59 2021 daemon.notice netifd: lan (1142): udhcpc: sending renew to 172.20.20.1
Wed Sep  8 19:14:59 2021 daemon.notice netifd: lan (1142): udhcpc: lease of 172.20.20.253 obtained, lease time 10800
Wed Sep  8 19:15:00 2021 kern.info kernel: [  527.098873] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Wed Sep  8 19:15:00 2021 kern.info kernel: [  527.105810] br-lan: port 3(wlan1) entered blocking state
Wed Sep  8 19:15:00 2021 kern.info kernel: [  527.111296] br-lan: port 3(wlan1) entered forwarding state
Wed Sep  8 19:15:00 2021 daemon.err hostapd: Interface initialization failed
Wed Sep  8 19:15:00 2021 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->DISABLED
Wed Sep  8 19:15:00 2021 daemon.notice hostapd: wlan1: AP-DISABLED
Wed Sep  8 19:15:00 2021 daemon.notice hostapd: wlan1: interface state DISABLED->DISABLED
Wed Sep  8 19:15:00 2021 daemon.notice hostapd: wlan1: AP-DISABLED
Wed Sep  8 19:15:00 2021 daemon.notice hostapd: wlan1: CTRL-EVENT-TERMINATING
Wed Sep  8 19:15:00 2021 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan1 wasn't started
Wed Sep  8 19:15:00 2021 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Wed Sep  8 19:15:00 2021 kern.info kernel: [  527.122665] device wlan1 left promiscuous mode
Wed Sep  8 19:15:00 2021 kern.info kernel: [  527.127327] br-lan: port 3(wlan1) entered disabled state
Wed Sep  8 19:15:00 2021 daemon.notice hostapd: ELOOP: remaining socket: sock=21 eloop_data=0x77ea5330 user_data=0 handler=0x43c101
Wed Sep  8 19:15:00 2021 daemon.notice netifd: radio1 (1729): cat: can't open '/var/run/wifi-phy1.pid': No such file or directory
Wed Sep  8 19:15:00 2021 daemon.notice netifd: radio1 (1729): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process  path (/proc/exe)
Wed Sep  8 19:15:00 2021 daemon.notice netifd: radio1 (1729): Command failed: Invalid argument
Wed Sep  8 19:15:01 2021 kern.info kernel: [  527.327853] ieee80211 phy1: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration start
Wed Sep  8 19:15:01 2021 kern.info kernel: [  527.336689] ieee80211 phy1: rt2800_rf_self_txdc_cal: Info - RF Tx self calibration end
Wed Sep  8 19:15:02 2021 kern.info kernel: [  529.273762] ieee80211 phy1: rt2800_loft_iq_calibration: Info - LOFT Calibration Done!
Wed Sep  8 19:15:02 2021 kern.info kernel: [  529.285661] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Start!
Wed Sep  8 19:15:02 2021 kern.info kernel: [  529.307133] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Done! CH = 0, (gain= f, phase=3d)
Wed Sep  8 19:15:02 2021 kern.info kernel: [  529.317416] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Start!
Wed Sep  8 19:15:02 2021 kern.info kernel: [  529.338759] ieee80211 phy1: rt2800_iq_search: Info - IQCalibration Done! CH = 1, (gain= 0, phase=3e)
Wed Sep  8 19:15:02 2021 kern.info kernel: [  529.348107] ieee80211 phy1: rt2800_loft_iq_calibration: Info - TX IQ Calibration Done!
Wed Sep  8 19:15:02 2021 kern.info kernel: [  529.384449] ieee80211 phy1: rt2800_rxiq_calibration: Info - RXIQ G_imb=-1, Ph_rx=1
Wed Sep  8 19:15:02 2021 kern.info kernel: [  529.404880] ieee80211 phy1: rt2800_rxiq_calibration: Info - RXIQ G_imb=1, Ph_rx=-3
Wed Sep  8 19:15:02 2021 kern.info kernel: [  529.421149] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Wed Sep  8 19:15:02 2021 kern.info kernel: [  529.520403] br-lan: port 3(wlan1) entered blocking state
Wed Sep  8 19:15:02 2021 kern.info kernel: [  529.525965] br-lan: port 3(wlan1) entered disabled state
Wed Sep  8 19:15:02 2021 kern.info kernel: [  529.531789] device wlan1 entered promiscuous mode
Wed Sep  8 19:15:02 2021 daemon.notice netifd: lan (1142): udhcpc: performing DHCP renew
Wed Sep  8 19:15:02 2021 daemon.notice netifd: lan (1142): udhcpc: sending renew to 172.20.20.1
Wed Sep  8 19:15:02 2021 daemon.notice netifd: lan (1142): udhcpc: lease of 172.20.20.253 obtained, lease time 10800

Jeśli chodzi o ten fragment konfiguracji:

Cezary napisał/a:

wireless.default_radio1.dtim_period='10'
wireless.default_radio1.ft_over_ds='0'
wireless.default_radio1.ieee80211w='1'
wireless.default_radio1.wpa_disable_eapol_key_retries='1'
wireless.default_radio1.mobility_domain='7420'
wireless.default_radio1.ft_psk_generate_local='1'
wireless.default_radio1.ieee80211r='1'

to nie śmieci tylko celowa konfiguracja - kolejno remedium na niedopracowaną obsługę sieci Wi-Fi w produktach Apple (DTIM wyższy niż 3 zapobiega łączeniu i rozłączaniu się co chwilę) i aktywacja roamingu 802.11r zgodnie z pozostałymi APkami w mojej sieci. Oczywiście działa prawidłowo na pozostałych urządzeniach (zarówno mt76 jak i x86).

MikroTik RouterOS to życie

Cezary · 2021-09-08 18:33:18

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,872

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

Mimo wszystko - wywal to, zostaw domyślną konfigurację i dopiero zobacz czy się radio uruchomi.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

ksx4system · 2021-09-08 18:47:54

ksx4system
Użytkownik
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2021-09-08
Posty: 15

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

Przy domyślnych ustawieniach i SSID ustawionym dosłownie na "CENZURA" radio się uruchomiło. Udało się nawet przywrócić moje ustawienia dotyczące 802.11r i DTIM, a konfiguracja przetrwała restart urządzenia. Niestety po zmianie SSID na docelowy (w formacie "nazwa-ssid") radio znów nie działa poprawnie (nawet jeśli reszta ustawień jest domyślna).

Jako ciekawostkę dodam, że inne routery na platformie mt76 bez problemu nadają SSID z minusem w środku nazwy.

MikroTik RouterOS to życie

Cezary · 2021-09-08 18:51:18

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,872

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

Więc z jakiegoś powodu nie chce, ale masz pewność że sprzęt jest dobry.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

ksx4system · 2021-09-08 18:56:31

ksx4system
Użytkownik
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2021-09-08
Posty: 15

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

Pytanie co może blokować rozgłaszanie SSIDu z minusem w nazwie... Drugie radio rozgłaszające bliźniaczo podobny SSID (tj. również stworzony podług klucza "nazwa-ssid") włącza się w zasadzie prawidłowo (z wyłączeniem absurdalnie niskiego ograniczenia mocy).

MikroTik RouterOS to życie

Cybe · 2021-09-08 18:56:40

Cybe
Użytkownik
Nieaktywny

Zarejestrowany: 2020-06-23
Posty: 494

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

Co do mocy radia 5 – u mnie było chyba maksymalnie 11 albo 12 dBm – czy to w 19.07.7 (.8 jeszcze wtedy nie było), czy w jednej z pierwszych edycji 21.02 (z Eko).

ksx4system · 2021-09-08 18:58:14

ksx4system
Użytkownik
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2021-09-08
Posty: 15

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

Cybe napisał/a:

maksymalnie 11 albo 12 dBm

W moim przypadku to właśnie 11dBm.

MikroTik RouterOS to życie

Cybe · 2021-09-08 19:00:35

Cybe
Użytkownik
Nieaktywny

Zarejestrowany: 2020-06-23
Posty: 494

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

Ogólnie znany problem, poruszany na forach OpenWrt już dawno i, jak widać, dotąd się nic nie zmieniło: https://forum.openwrt.org/t/tplink-arch … ower/42908

Cezary · 2021-09-08 19:19:12

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,872

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

https://github.com/openwrt/mt76/issues/286 ?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

ksx4system · 2021-09-08 19:36:45

ksx4system
Użytkownik
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2021-09-08
Posty: 15

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

Cezary napisał/a:

https://github.com/openwrt/mt76/issues/286 ?

Trudno powiedzieć ale chyba nie. Nie działa jak ustawiam SSID poprzez LuCI natomiast po ręcznej edycji /etc/config/wireless i wydaniu polecenia "wifi" zaczęło działać

MikroTik RouterOS to życie

Cezary · 2021-09-08 19:38:25

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,872

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

To link dotyczący mocy na radiu a nie ssid

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cybe · 2021-09-08 19:42:59

Cybe
Użytkownik
Nieaktywny

Zarejestrowany: 2020-06-23
Posty: 494

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

@ksx4system
Wypróbuj patcha - ja już nie mam tego sprzętu, ale też jestem ciekawy.

ksx4system · 2021-09-08 19:54:01

ksx4system
Użytkownik
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2021-09-08
Posty: 15

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

W kwestii mocy na radiu 5GHz to LuCI zgłasza aktualnie 10dBm ale chyba to się mija z prawdą - realny zasięg jest wyższy niż wskazywałaby na to moc w granicach błędu pomiarowego.

MikroTik RouterOS to życie

Cybe · 2021-09-08 19:56:05

Cybe
Użytkownik
Nieaktywny

Zarejestrowany: 2020-06-23
Posty: 494

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

Chodziło mi o patch z linku, który podał ci Czarek: https://github.com/openwrt/mt76/files/3 … k.c2v1.zip

Jishnu · 2021-09-09 18:51:48

Jishnu
Użytkownik
Nieaktywny

Zarejestrowany: 2021-03-25
Posty: 5

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

Ja na swoim C2 v1 miałem podobny problem.
Radio 1 (Generic 802.11bgn) nie podnosiło się a w logu wyglądało to tak samo.

w moim przypadku problemem było włączone WPA3-SAE (gdzie 802.11w musi być włączone a którego dany sterownik rt2800soc nie obsługuje)
na WPA2 działało bezproblemowo

Jeśli ktoś by miał parcie na odpalenie WPA3 to można to zrobić edytując plik:
/etc/modules.d/rt2800-soc
i dodając wpis:
rt2800soc nohwcrypt=1

mając na uwadze olbrzymi spadek wydajności

FAQ o OpenWrt | Sprzedam różne routery | Oddam

TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

Posty: 19

1 Temat przez ksx4system 2021-09-08 17:35:28 (edytowany przez ksx4system 2021-09-08 17:35:56)

Temat: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

2 Odpowiedź przez Cezary 2021-09-08 17:46:51

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

3 Odpowiedź przez ksx4system 2021-09-08 18:05:14 (edytowany przez ksx4system 2021-09-08 18:07:07)

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

4 Odpowiedź przez Cezary 2021-09-08 18:09:10

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

5 Odpowiedź przez ksx4system 2021-09-08 18:24:45 (edytowany przez ksx4system 2021-09-08 18:26:22)

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

6 Odpowiedź przez Cezary 2021-09-08 18:33:18

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

7 Odpowiedź przez ksx4system 2021-09-08 18:47:54 (edytowany przez ksx4system 2021-09-08 18:49:24)

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

8 Odpowiedź przez Cezary 2021-09-08 18:51:18

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

9 Odpowiedź przez ksx4system 2021-09-08 18:56:31

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

10 Odpowiedź przez Cybe 2021-09-08 18:56:40

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

11 Odpowiedź przez ksx4system 2021-09-08 18:58:14

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

12 Odpowiedź przez Cybe 2021-09-08 19:00:35

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

13 Odpowiedź przez Cezary 2021-09-08 19:19:12

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

14 Odpowiedź przez ksx4system 2021-09-08 19:36:45

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

15 Odpowiedź przez Cezary 2021-09-08 19:38:25

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

16 Odpowiedź przez Cybe 2021-09-08 19:42:59

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

17 Odpowiedź przez ksx4system 2021-09-08 19:54:01

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

18 Odpowiedź przez Cybe 2021-09-08 19:56:05

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

19 Odpowiedź przez Jishnu 2021-09-09 18:51:48

Odp: TP-Link Archer C2 (v1.1) - nie działa Wi-Fi 2,4GHz

Posty: 19