[ 0.000000] Linux version 4.14.171 (cezary@eko.one.pl) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r10707-75d11f665c)) #0 Thu Feb 27 21:34:09 2020
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[ 0.000000] MIPS: machine is TP-Link Archer C7 v2
[ 0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat 804fbf60, node_mem_map 81008c20
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] random: get_random_bytes called from 0x804ff740 with crng_init=0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 123300K/131072K available (4028K kernel code, 163K rwdata, 532K rodata, 1220K init, 212K bss, 7772K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 51
[ 0.000000] CPU clock: 720.000 MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns
[ 0.000007] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns
[ 0.008297] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
[ 0.074985] pid_max: default: 32768 minimum: 301
[ 0.080062] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.087094] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.098239] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.108735] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.115289] pinctrl core: initialized pinctrl subsystem
[ 0.122710] NET: Registered protocol family 16
[ 0.130435] PCI host bridge /ahb/pcie-controller@18250000 ranges:
[ 0.136968] MEM 0x0000000012000000..0x0000000013ffffff
[ 0.142523] IO 0x0000000000000001..0x0000000000000001
[ 0.162179] PCI host bridge to bus 0000:00
[ 0.166547] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
[ 0.173893] pci_bus 0000:00: root bus resource [io 0x0001]
[ 0.179821] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.187049] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.195504] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000
[ 0.195558] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.195613] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.195687] pci 0000:00:00.0: supports D1 D2
[ 0.195862] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.195885] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
[ 0.203708] pci 0000:00:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
[ 0.213785] clocksource: Switched to clocksource MIPS
[ 0.219980] NET: Registered protocol family 2
[ 0.225365] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.232788] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.239595] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.246473] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.252703] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.259605] NET: Registered protocol family 1
[ 0.264305] PCI: CLS 0 bytes, default 32
[ 0.266683] Crashlog allocated RAM at address 0x3f00000
[ 0.273272] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.284292] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.290495] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.308657] io scheduler noop registered
[ 0.312831] io scheduler deadline registered (default)
[ 0.318618] ar7200-usb-phy 18030000.usb-phy0: phy reset is missing
[ 0.325273] ar7200-usb-phy 18030010.usb-phy1: phy reset is missing
[ 0.333467] pinctrl-single 1804002c.pinmux: 544 pins at pa b804002c size 68
[ 0.341398] gpio-export gpio-export: 2 gpio(s) exported
[ 0.347707] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.356439] console [ttyS0] disabled
[ 0.360271] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 2500000) is a 16550A
[ 0.369480] console [ttyS0] enabled
[ 0.376908] bootconsole [early0] disabled
[ 0.392952] m25p80 spi0.0: s25fl128s (16384 Kbytes)
[ 0.397977] 3 fixed-partitions partitions found on MTD device spi0.0
[ 0.404440] Creating 3 MTD partitions on "spi0.0":
[ 0.409302] 0x000000000000-0x000000020000 : "u-boot"
[ 0.415010] 0x000000020000-0x000000ff0000 : "firmware"
[ 0.421168] 2 tplink-fw partitions found on MTD device firmware
[ 0.427217] Creating 2 MTD partitions on "firmware":
[ 0.432262] 0x000000000000-0x000000185c0b : "kernel"
[ 0.437899] 0x000000185c0c-0x000000fd0000 : "rootfs"
[ 0.443512] mtd: device 3 (rootfs) set to be root filesystem
[ 0.449333] 1 squashfs-split partitions found on MTD device rootfs
[ 0.455632] 0x000000760000-0x000000fd0000 : "rootfs_data"
[ 0.461705] 0x000000ff0000-0x000001000000 : "art"
[ 0.468074] libphy: Fixed MDIO Bus: probed
[ 0.815490] libphy: ag71xx_mdio: probed
[ 0.822015] switch0: Atheros AR8327 rev. 4 switch registered on mdio-bus.0
[ 1.473093] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
[ 1.484482] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
[ 1.825371] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
[ 1.834985] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: sgmii
[ 1.843382] NET: Registered protocol family 10
[ 1.852397] Segment Routing with IPv6
[ 1.856246] NET: Registered protocol family 17
[ 1.860797] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.873960] 8021q: 802.1Q VLAN Support v1.8
[ 1.880462] hctosys: unable to open rtc device (rtc0)
[ 1.891577] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[ 1.903139] Freeing unused kernel memory: 1220K
[ 1.907769] This architecture does not have kernel memory protection.
[ 2.583802] random: fast init done
[ 2.636100] init: Console is alive
[ 2.639725] init: - watchdog -
[ 4.753633] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 4.967411] usbcore: registered new interface driver usbfs
[ 4.973034] usbcore: registered new interface driver hub
[ 4.978527] usbcore: registered new device driver usb
[ 5.010241] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.023688] SCSI subsystem initialized
[ 5.031509] ehci-platform: EHCI generic platform driver
[ 5.037076] ehci-platform 1b000000.usb: EHCI Host Controller
[ 5.042858] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1
[ 5.050895] ehci-platform 1b000000.usb: irq 14, io mem 0x1b000000
[ 5.083816] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00
[ 5.090762] hub 1-0:1.0: USB hub found
[ 5.094892] hub 1-0:1.0: 1 port detected
[ 5.099367] ehci-platform 1b400000.usb: EHCI Host Controller
[ 5.105186] ehci-platform 1b400000.usb: new USB bus registered, assigned bus number 2
[ 5.113207] ehci-platform 1b400000.usb: irq 15, io mem 0x1b400000
[ 5.143812] ehci-platform 1b400000.usb: USB 2.0 started, EHCI 1.00
[ 5.150769] hub 2-0:1.0: USB hub found
[ 5.154888] hub 2-0:1.0: 1 port detected
[ 5.162776] usbcore: registered new interface driver usb-storage
[ 5.170642] usbcore: registered new interface driver uas
[ 5.176629] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 5.186438] init: - preinit -
[ 6.513848] random: jshn: uninitialized urandom read (4 bytes read)
[ 6.757563] random: jshn: uninitialized urandom read (4 bytes read)
[ 6.922195] random: jshn: uninitialized urandom read (4 bytes read)
[ 8.336147] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 8.342121] IPv6: ADDRCONF(NETDEV_UP): eth1.1: link is not ready
[ 8.382682] urandom_read: 4 callbacks suppressed
[ 8.382688] random: procd: uninitialized urandom read (4 bytes read)
[ 9.394921] eth1: link up (1000Mbps/Full duplex)
[ 9.399627] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 9.406302] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.1: link becomes ready
[ 11.592934] mount_root: loading kmods from internal overlay
[ 11.641286] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 11.649329] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 12.556512] jffs2: notice: (517) jffs2_build_xattr_subsystem: complete building xattr subsystem, 39 of xdatum (2 unchecked, 37 orphan) and 62 of xref (39 dead, 0 orphan) found.
[ 12.572957] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 12.589420] block: extroot: not configured
[ 12.724739] jffs2: notice: (515) jffs2_build_xattr_subsystem: complete building xattr subsystem, 39 of xdatum (2 unchecked, 37 orphan) and 62 of xref (39 dead, 0 orphan) found.
[ 12.742585] mount_root: loading kmods from internal overlay
[ 12.789755] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 12.801415] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 13.392881] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 13.405879] block: extroot: not configured
[ 13.410962] mount_root: switching to jffs2 overlay
[ 13.457415] overlayfs: upper fs does not support tmpfile.
[ 13.467589] urandom-seed: Seeding with /etc/urandom.seed
[ 13.599048] eth1: link down
[ 13.618239] procd: - early -
[ 13.621250] procd: - watchdog -
[ 14.145157] random: jshn: uninitialized urandom read (4 bytes read)
[ 14.323647] procd: - watchdog -
[ 14.328087] procd: - ubus -
[ 14.425704] random: jshn: uninitialized urandom read (4 bytes read)
[ 14.499321] procd: - init -
[ 15.800844] kmodloader: loading kernel modules from /etc/modules.d/*
[ 15.860463] tun: Universal TUN/TAP device driver, 1.6
[ 15.899405] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.936098] Netfilter messages via NETLINK v0.30.
[ 15.951142] ip_set: protocol 6
[ 16.042204] fuse init (API version 7.26)
[ 16.079385] usbcore: registered new interface driver cdc_acm
[ 16.085170] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 16.135056] usbcore: registered new interface driver cdc_wdm
[ 16.155815] Loading modules backported from Linux version v4.19.98-0-gd183c8e2647a
[ 16.163491] Backport generated by backports.git v4.19.98-1-0-g8204eb99
[ 16.202427] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.250793] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 16.388792] urngd: v1.0.2 started.
[ 16.634104] usbcore: registered new interface driver usblp
[ 16.668073] usbcore: registered new interface driver usbserial
[ 16.674119] usbcore: registered new interface driver usbserial_generic
[ 16.680804] usbserial: USB Serial support registered for generic
[ 16.749873] wireguard: WireGuard 0.0.20190702 loaded. See www.wireguard.com for information.
[ 16.758474] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 16.838379] random: crng init done
[ 16.848130] xt_time: kernel timezone is -0000
[ 16.870425] usbcore: registered new interface driver cdc_ether
[ 16.906746] usbcore: registered new interface driver cdc_ncm
[ 17.105082] usbcore: registered new interface driver huawei_cdc_ncm
[ 17.242597] PPP generic driver version 2.4.2
[ 17.264873] NET: Registered protocol family 24
[ 17.286053] usbcore: registered new interface driver qmi_wwan
[ 17.311208] usbcore: registered new interface driver rndis_host
[ 17.345840] usbcore: registered new interface driver sierra
[ 17.351553] usbserial: USB Serial support registered for Sierra USB modem
[ 17.385548] usbcore: registered new interface driver sierra_net
[ 17.506368] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x3c.
[ 17.528052] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 17.534011] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[ 17.914214] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:00:00.0.txt failed with error -2
[ 17.924930] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 18.946896] firmware ath10k!fwcfg-pci-0000:00:00.0.txt: firmware_loading_store: map pages failed
[ 18.956082] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
[ 18.966962] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 19.144443] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[ 19.154992] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-5.bin failed with error -2
[ 19.166144] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 19.343986] firmware ath10k!QCA988X!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[ 19.353568] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-2.bin failed with error -2
[ 19.364717] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 19.543017] firmware ath10k!QCA988X!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[ 19.552646] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
[ 19.563532] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 19.741433] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 19.750805] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-5.bin failed with error -2
[ 19.761689] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 19.938288] firmware ath10k!QCA988X!hw2.0!firmware-5.bin: firmware_loading_store: map pages failed
[ 19.947647] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-4.bin failed with error -2
[ 19.958529] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 20.133288] firmware ath10k!QCA988X!hw2.0!firmware-4.bin: firmware_loading_store: map pages failed
[ 20.142644] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-3.bin failed with error -2
[ 20.153528] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 20.330653] firmware ath10k!QCA988X!hw2.0!firmware-3.bin: firmware_loading_store: map pages failed
[ 20.343617] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[ 20.353017] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 20.365446] ath10k_pci 0000:00:00.0: firmware ver 10.1-ct-8x-__fW-022-b0e1b7cd api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 1e527180
[ 20.486710] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[ 20.497329] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 20.603933] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
[ 20.619418] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 21.567070] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
[ 21.584503] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
[ 21.590796] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
[ 21.598942] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 20904 iram: 26056'
[ 21.666977] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
[ 21.679778] ath10k_pci 0000:00:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
[ 21.816649] ath: EEPROM regdomain: 0x0
[ 21.816655] ath: EEPROM indicates default country code should be used
[ 21.816658] ath: doing EEPROM country->regdmn map search
[ 21.816671] ath: country maps to regdmn code: 0x3a
[ 21.816676] ath: Country alpha2 being used: US
[ 21.816679] ath: Regpair used: 0x3a
[ 21.864523] usbcore: registered new interface driver cdc_mbim
[ 21.885515] usbcore: registered new interface driver option
[ 21.891241] usbserial: USB Serial support registered for GSM modem (1-port)
[ 21.916320] usbcore: registered new interface driver qcserial
[ 21.922217] usbserial: USB Serial support registered for Qualcomm USB modem
[ 21.971799] ath: EEPROM regdomain: 0x0
[ 21.971806] ath: EEPROM indicates default country code should be used
[ 21.971809] ath: doing EEPROM country->regdmn map search
[ 21.971822] ath: country maps to regdmn code: 0x3a
[ 21.971827] ath: Country alpha2 being used: US
[ 21.971830] ath: Regpair used: 0x3a
[ 21.989700] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 21.991186] ieee80211 phy1: Atheros AR9550 Rev:0 mem=0xb8100000, irq=12
[ 22.049735] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 35.851701] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 35.858813] eth1: link up (1000Mbps/Full duplex)
[ 35.863510] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 35.886937] br-lan: port 1(eth1.1) entered blocking state
[ 35.892453] br-lan: port 1(eth1.1) entered disabled state
[ 35.898312] device eth1.1 entered promiscuous mode
[ 35.903176] device eth1 entered promiscuous mode
[ 35.929593] br-lan: port 1(eth1.1) entered blocking state
[ 35.935118] br-lan: port 1(eth1.1) entered forwarding state
[ 35.941072] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 36.008268] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 36.032766] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[ 36.914099] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 37.075325] eth0: link up (1000Mbps/Full duplex)
[ 37.080083] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 37.163883] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[ 41.451842] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 41.567180] br-lan: port 2(wlan1) entered blocking state
[ 41.572697] br-lan: port 2(wlan1) entered disabled state
[ 41.578398] device wlan1 entered promiscuous mode
[ 41.583259] br-lan: port 2(wlan1) entered blocking state
[ 41.588697] br-lan: port 2(wlan1) entered forwarding state
[ 41.669805] br-lan: port 2(wlan1) entered disabled state
[ 43.844273] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
[ 43.861818] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
[ 43.868184] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
[ 43.876344] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 20904 iram: 26056'
[ 43.982496] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
[ 44.014612] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 44.072799] br-lan: port 3(wlan0) entered blocking state
[ 44.078252] br-lan: port 3(wlan0) entered disabled state
[ 44.083939] device wlan0 entered promiscuous mode
[ 46.048888] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 46.055638] br-lan: port 2(wlan1) entered blocking state
[ 46.061062] br-lan: port 2(wlan1) entered forwarding state
[ 46.209955] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 46.216614] br-lan: port 3(wlan0) entered blocking state
[ 46.222022] br-lan: port 3(wlan0) entered forwarding state
[ 3141.470436] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
