Tak, odinstaluj odhcpd i odhcp6c

Otwieranie portów nic ci nie da, masz przecież hlinka, czyli jesteś za kolejnym routrem.

kmod-nf-nethelper zainstaluj, to służy do śledzenia połączeń ftp.

Jak znajdziesz coś tańszego od r6220 o podobnych parametrach to bierz coś innego...

Dla przeciwników R6220 mam inne tanie rozwiązanie:

https://allegro.pl/oferta/lb-link-bl-w1 … 24f4bd22ad

Gorszy proc, ale Wifi działa podobnie jak w R6220. Mam jako AP, daje radę.

No i obudowa dużo mniejsza.

1. Czy warto aktualizować  z OpenWrt 19.07 do wersji 21.02 dla tego routera, która to jest konkretnie paczka?
2. Jaka dzisiaj jest dobra alternatywa pod OpenWrt dla Netgear WNDR4300?
3. Czy ZTE MF258K (WF860) to dzisiaj najlepszy router do agregacji pasm?

Proszę o sprawdzenie loga

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.08.09 09:27:36 =~=~=~=~=~=~=~=~=~=~=~=
login as: root
root@192.168.1.1's password:

BusyBox v1.30.1 () built-in shell (ash)

  _______                     ________        __
|       |.-----.-----.-----.|  |  |  |.----.|  |_
|   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
|_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
-----------------------------------------------------------------------------
|                                                                           |
| OpenWrt 19.07-SNAPSHOT, r10731-e68d589e7b                                 |
|                                                                           |
| Build time: 2019-11-23 10:19 CET                                          |
| Cezary Jackiewicz (obsy), http://eko.one.pl                               |
|                                                                           |
-----------------------------------------------------------------------------
| Machine: NETGEAR WNDR4300                                                 |
| Uptime: 1d, 22:12:02                                                      |
| Load: 0.07 0.02 0.00                                                      |
| Flash: total: 96.7MB, free: 91.7MB, used: 0%                              |
| Memory: total: 121.4MB, free: 100.0MB, used: 17%                          |
| WAN: 192.168.8.100, proto: dhcp                                           |
| LAN: 192.168.1.1, leases: 3                                               |
| radio0: mode: ap, ssid: kubastmp, channel: 5, conn: 1                     |
-----------------------------------------------------------------------------
]0;root@Router_NG1: ~root@Router_NG1:~# dmesg
[    0.000000] Linux version 4.14.155 (cezary@eko.one.pl) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r10707-75d11f665c)) #0 Fri Nov 22 21:54:28 2019
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[    0.000000] SoC: Atheros AR9344 rev 2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 80536ba0, node_mem_map 81000020
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] random: get_random_bytes called from 0x8053a740 with crng_init=0
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line:  board=WNDR4300 console=ttyS0,115200 mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata)ro,512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),121856k(ubi),123904k@0x6c0000(firmware),256k(caldata_backup),-(reserved) rootfstype=squashfs noinitrd
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 124100K/131072K available (4251K kernel code, 180K rwdata, 528K rodata, 216K init, 212K bss, 6972K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 51
[    0.000000] Clocks: CPU:560.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:40.000MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
[    0.000010] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
[    0.008319] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
[    0.084946] pid_max: default: 32768 minimum: 301
[    0.090077] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.097142] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.106967] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.117480] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.125206] NET: Registered protocol family 16
[    0.131373] MIPS: machine is NETGEAR WNDR4300
[    0.136234] ar71xx: using random MAC address for eth0
[    0.374569] registering PCI controller with io_map_base unset
[    0.393739] PCI host bridge to bus 0000:00
[    0.398112] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[    0.405477] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.411408] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.418644] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.427106] pci 0000:00:00.0: [168c:0033] type 00 class 0x028000
[    0.427122] pci 0000:00:00.0: invalid calibration data
[    0.432649] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
[    0.432707] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.432789] pci 0000:00:00.0: supports D1
[    0.432800] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.433018] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.433047] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
[    0.440842] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
[    0.452029] clocksource: Switched to clocksource MIPS
[    0.458532] NET: Registered protocol family 2
[    0.464163] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.471597] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.478421] TCP: Hash tables configured (established 1024 bind 1024)
[    0.485341] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.491572] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.498541] NET: Registered protocol family 1
[    0.503271] PCI: CLS 0 bytes, default 32
[    0.506272] Crashlog allocated RAM at address 0x3f00000
[    0.513259] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[    0.525463] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.531673] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.552868] io scheduler noop registered
[    0.557043] io scheduler deadline registered (default)
[    0.563004] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.571987] console [ttyS0] disabled
[    0.595906] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
[    0.605103] console [ttyS0] enabled
[    0.612530] bootconsole [early0] disabled
[    0.628176] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xf1
[    0.634676] nand: Micron NAND 128MiB 3,3V 8-bit
[    0.639280] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    0.647001] Scanning device for bad blocks
[    0.654976] random: fast init done
[    0.736346] mtd: ar934x-nfc: skipping zero sized partition
[    0.741915] 11 cmdlinepart partitions found on MTD device ar934x-nfc
[    0.748382] Creating 11 MTD partitions on "ar934x-nfc":
[    0.753711] 0x000000000000-0x000000040000 : "u-boot"
[    0.760144] 0x000000040000-0x000000080000 : "u-boot-env"
[    0.767666] 0x000000080000-0x0000000c0000 : "caldata"
[    0.774226] 0x0000000c0000-0x000000140000 : "pot"
[    0.781053] 0x000000140000-0x000000340000 : "language"
[    0.787728] 0x000000340000-0x0000003c0000 : "config"
[    0.794882] 0x0000003c0000-0x0000006c0000 : "traffic_meter"
[    0.801942] 0x0000006c0000-0x0000008c0000 : "kernel"
[    0.809088] 0x0000008c0000-0x000007fc0000 : "ubi"
[    0.815922] 0x0000006c0000-0x000007fc0000 : "firmware"
[    2.159523] random: crng init done
[    2.540113] 0x000007fc0000-0x000008000000 : "caldata_backup"
[    2.548399] libphy: Fixed MDIO Bus: probed
[    2.557602] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
[    3.225480] libphy: ag71xx_mdio: probed
[    3.853389] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
[    3.864807] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
[    3.873702] NET: Registered protocol family 10
[    3.883828] Segment Routing with IPv6
[    3.887663] NET: Registered protocol family 17
[    3.892286] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    3.906005] 8021q: 802.1Q VLAN Support v1.8
[    3.914154] UBI: auto-attach mtd8
[    3.917556] ubi0: attaching mtd8
[    5.402831] ubi0: scanning is finished
[    5.424235] ubi0: attached mtd8 (name "ubi", size 119 MiB)
[    5.429816] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    5.436844] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    5.443744] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    5.450801] ubi0: good PEBs: 952, bad PEBs: 0, corrupted PEBs: 0
[    5.456907] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    5.464249] ubi0: max/mean erase counter: 35/10, WL threshold: 4096, image sequence number: 1524467091
[    5.473705] ubi0: available PEBs: 0, total reserved PEBs: 952, PEBs reserved for bad PEB handling: 20
[    5.483116] ubi0: background thread "ubi_bgt0d" started, PID 366
[    5.490811] block ubiblock0_0: created from ubi0:0(rootfs)
[    5.496441] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    5.503527] hctosys: unable to open rtc device (rtc0)
[    5.515625] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    5.524006] Freeing unused kernel memory: 216K
[    5.528520] This architecture does not have kernel memory protection.
[    6.245248] init: Console is alive
[    6.248957] init: - watchdog -
[    8.059282] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    8.188857] usbcore: registered new interface driver usbfs
[    8.194574] usbcore: registered new interface driver hub
[    8.200069] usbcore: registered new device driver usb
[    8.242174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    8.258119] SCSI subsystem initialized
[    8.267255] ehci-platform: EHCI generic platform driver
[    8.272728] ehci-platform ehci-platform: EHCI Host Controller
[    8.278596] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    8.288746] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    8.322085] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    8.329319] hub 1-0:1.0: USB hub found
[    8.333569] hub 1-0:1.0: 1 port detected
[    8.342590] usbcore: registered new interface driver usb-storage
[    8.351167] usbcore: registered new interface driver uas
[    8.357340] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    8.375175] init: - preinit -
[    8.735033] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    8.968301] usb-storage 1-1:1.0: USB Mass Storage device detected
[    8.992174] scsi host0: usb-storage 1-1:1.0
[    9.186927] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.043032] scsi 0:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[   10.053171] scsi 0:0:0:1: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
[   10.066462] sd 0:0:0:1: [sda] Attached SCSI removable disk
[   10.203303] eth0: link up (1000Mbps/Full duplex)
[   10.208084] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   12.491389] mount_root: loading kmods from internal overlay
[   12.555159] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[   12.563421] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[   12.972806] print_req_error: I/O error, dev mtdblock2, sector 8
[   13.001178] print_req_error: I/O error, dev mtdblock2, sector 8
[   13.007200] Buffer I/O error on dev mtdblock2, logical block 1, async page read
[   13.015183] print_req_error: I/O error, dev mtdblock2, sector 8
[   13.021203] Buffer I/O error on dev mtdblock2, logical block 1, async page read
[   13.075819] print_req_error: I/O error, dev mtdblock4, sector 56
[   13.088138] print_req_error: I/O error, dev mtdblock4, sector 56
[   13.094250] Buffer I/O error on dev mtdblock4, logical block 7, async page read
[   13.340390] print_req_error: I/O error, dev mtdblock7, sector 3184
[   13.346907] print_req_error: I/O error, dev mtdblock7, sector 3184
[   13.353191] Buffer I/O error on dev mtdblock7, logical block 398, async page read
[   13.516561] print_req_error: I/O error, dev mtdblock9, sector 440
[   13.561068] print_req_error: I/O error, dev mtdblock9, sector 440
[   13.567268] Buffer I/O error on dev mtdblock9, logical block 55, async page read
[   13.578251] print_req_error: I/O error, dev mtdblock9, sector 440
[   13.584447] Buffer I/O error on dev mtdblock9, logical block 55, async page read
[   13.621077] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 486
[   13.746597] UBIFS (ubi0:1): recovery needed
[   13.967872] UBIFS (ubi0:1): recovery completed
[   13.972517] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[   13.980461] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   13.990544] UBIFS (ubi0:1): FS size: 110342144 bytes (105 MiB, 869 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs)
[   14.001332] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[   14.008070] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID E38E4BFD-3F2F-469F-92EB-8FC8F94B26FC, small LPT model
[   14.021484] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[   14.040388] block: extroot: not configured
[   14.044902] UBIFS (ubi0:1): un-mount UBI device 0
[   14.049703] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[   14.061702] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 489
[   14.266107] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[   14.274112] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   14.284208] UBIFS (ubi0:1): FS size: 110342144 bytes (105 MiB, 869 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs)
[   14.294988] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[   14.301708] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID E38E4BFD-3F2F-469F-92EB-8FC8F94B26FC, small LPT model
[   14.319081] mount_root: loading kmods from internal overlay
[   14.374401] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[   14.386431] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[   14.572659] Buffer I/O error on dev mtdblock2, logical block 1, async page read
[   14.580583] Buffer I/O error on dev mtdblock2, logical block 1, async page read
[   14.641248] Buffer I/O error on dev mtdblock4, logical block 7, async page read
[   14.713466] Buffer I/O error on dev mtdblock4, logical block 7, async page read
[   15.116958] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[   15.131096] block: extroot: not configured
[   15.138486] mount_root: switching to ubifs overlay
[   15.211654] urandom-seed: Seeding with /etc/urandom.seed
[   15.351751] eth0: link down
[   15.370220] procd: - early -
[   15.373338] procd: - watchdog -
[   16.109576] procd: - watchdog -
[   16.113259] procd: - ubus -
[   16.454446] procd: - init -
[   17.567238] usb 1-1: USB disconnect, device number 2
[   18.212077] usb 1-1: new high-speed USB device number 3 using ehci-platform
[   18.270065] kmodloader: loading kernel modules from /etc/modules.d/*
[   18.346579] tun: Universal TUN/TAP device driver, 1.6
[   18.389896] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   18.428491] Netfilter messages via NETLINK v0.30.
[   18.440880] usb-storage 1-1:1.2: USB Mass Storage device detected
[   18.464712] ip_set: protocol 6
[   18.472401] scsi host0: usb-storage 1-1:1.2
[   18.512465] urngd: v1.0.0 started.
[   18.588617] fuse init (API version 7.26)
[   18.629122] usbcore: registered new interface driver cdc_acm
[   18.634930] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   18.693779] usbcore: registered new interface driver cdc_wdm
[   18.703535] Loading modules backported from Linux version v4.19.85-0-gc63ee2939dc1
[   18.711221] Backport generated by backports.git v4.19.85-1-0-g8a8be258
[   18.765358] ip_tables: (C) 2000-2006 Netfilter Core Team
[   18.803142] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[   19.189059] usbcore: registered new interface driver usblp
[   19.227742] usbcore: registered new interface driver usbserial
[   19.233827] usbcore: registered new interface driver usbserial_generic
[   19.240547] usbserial: USB Serial support registered for generic
[   19.280144] wireguard: WireGuard 0.0.20190702 loaded. See www.wireguard.com for information.
[   19.288781] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   19.373092] xt_time: kernel timezone is -0000
[   19.384380] cdc_ether 1-1:1.0 eth1: register 'cdc_ether' at usb-ehci-platform-1, CDC Ethernet Device, 0c:5b:8f:27:9a:64
[   19.395632] usbcore: registered new interface driver cdc_ether
[   19.425904] usbcore: registered new interface driver cdc_ncm
[   19.484924] scsi 0:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
[   19.498961] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   19.533792] usbcore: registered new interface driver huawei_cdc_ncm
[   19.654179] PPP generic driver version 2.4.2
[   19.673451] NET: Registered protocol family 24
[   19.685099] usbcore: registered new interface driver qmi_wwan
[   19.705251] usbcore: registered new interface driver rndis_host
[   19.724068] usbcore: registered new interface driver sierra
[   19.729828] usbserial: USB Serial support registered for Sierra USB modem
[   19.754406] usbcore: registered new interface driver sierra_net
[   19.844673] usbcore: registered new interface driver cdc_mbim
[   19.864463] usbcore: registered new interface driver option
[   19.870231] usbserial: USB Serial support registered for GSM modem (1-port)
[   19.903104] usbcore: registered new interface driver qcserial
[   19.909030] usbserial: USB Serial support registered for Qualcomm USB modem
[   19.966382] ath: EEPROM regdomain: 0x0
[   19.966392] ath: EEPROM indicates default country code should be used
[   19.966396] ath: doing EEPROM country->regdmn map search
[   19.966413] ath: country maps to regdmn code: 0x3a
[   19.966419] ath: Country alpha2 being used: US
[   19.966423] ath: Regpair used: 0x3a
[   19.980597] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   19.982759] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47
[   19.989673] pci 0000:00:00.0: using irq 40 for pin 1
[   19.994787] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   20.042298] ath: EEPROM regdomain: 0x0
[   20.042308] ath: EEPROM indicates default country code should be used
[   20.042312] ath: doing EEPROM country->regdmn map search
[   20.042329] ath: country maps to regdmn code: 0x3a
[   20.042336] ath: Country alpha2 being used: US
[   20.042340] ath: Regpair used: 0x3a
[   20.054518] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   20.056640] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
[   20.102551] kmodloader: done loading kernel modules from /etc/modules.d/*
[   32.455750] print_req_error: 11 callbacks suppressed
[   32.455760] print_req_error: I/O error, dev mtdblock2, sector 8
[   32.489256] print_req_error: I/O error, dev mtdblock2, sector 8
[   32.495274] buffer_io_error: 3 callbacks suppressed
[   32.495282] Buffer I/O error on dev mtdblock2, logical block 1, async page read
[   32.508501] print_req_error: I/O error, dev mtdblock2, sector 8
[   32.514523] Buffer I/O error on dev mtdblock2, logical block 1, async page read
[   32.599267] print_req_error: I/O error, dev mtdblock4, sector 56
[   32.617280] print_req_error: I/O error, dev mtdblock4, sector 56
[   32.623397] Buffer I/O error on dev mtdblock4, logical block 7, async page read
[   32.730582] print_req_error: I/O error, dev mtdblock4, sector 56
[   32.736698] Buffer I/O error on dev mtdblock4, logical block 7, async page read
[   33.012206] print_req_error: I/O error, dev mtdblock7, sector 3184
[   33.022315] print_req_error: I/O error, dev mtdblock7, sector 3184
[   33.028601] Buffer I/O error on dev mtdblock7, logical block 398, async page read
[   33.335562] print_req_error: I/O error, dev mtdblock9, sector 440
[   33.408344] print_req_error: I/O error, dev mtdblock9, sector 440
[   33.414544] Buffer I/O error on dev mtdblock9, logical block 55, async page read
[   33.525052] Buffer I/O error on dev mtdblock9, logical block 55, async page read
[   36.200688] Buffer I/O error on dev mtdblock2, logical block 1, async page read
[   36.240660] Buffer I/O error on dev mtdblock2, logical block 1, async page read
[   36.333692] Buffer I/O error on dev mtdblock4, logical block 7, async page read
[   41.930215] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   41.955929] device eth0 entered promiscuous mode
[   41.961247] br-lan: port 1(eth0.1) entered blocking state
[   41.966807] br-lan: port 1(eth0.1) entered disabled state
[   41.972654] device eth0.1 entered promiscuous mode
[   42.006589] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   42.073269] cdc_ether 1-1:1.0 eth1: kevent 12 may have been dropped
[   42.107571] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[   43.105609] eth0: link up (1000Mbps/Full duplex)
[   43.110730] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   43.151321] br-lan: port 1(eth0.1) entered blocking state
[   43.156875] br-lan: port 1(eth0.1) entered forwarding state
[   43.163211] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[   43.283466] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   46.513728] ath: EEPROM regdomain: 0x8268
[   46.517805] ath: EEPROM indicates we should expect a country code
[   46.524047] ath: doing EEPROM country->regdmn map search
[   46.529438] ath: country maps to regdmn code: 0x37
[   46.534328] ath: Country alpha2 being used: PL
[   46.538834] ath: Regpair used: 0x37
[   46.542391] ath: regdomain 0x8268 dynamically updated by user
[   46.548293] ath: EEPROM regdomain: 0x8268
[   46.552380] ath: EEPROM indicates we should expect a country code
[   46.558556] ath: doing EEPROM country->regdmn map search
[   46.563959] ath: country maps to regdmn code: 0x37
[   46.568816] ath: Country alpha2 being used: PL
[   46.573335] ath: Regpair used: 0x37
[   46.576869] ath: regdomain 0x8268 dynamically updated by user
[   49.550794] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   49.646154] br-lan: port 2(wlan0) entered blocking state
[   49.651561] br-lan: port 2(wlan0) entered disabled state
[   49.657382] device wlan0 entered promiscuous mode
[   51.669058] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   51.675783] br-lan: port 2(wlan0) entered blocking state
[   51.681184] br-lan: port 2(wlan0) entered forwarding state
[15948.546335] usb 1-1: USB disconnect, device number 3
[15948.553803] cdc_ether 1-1:1.0 eth1: unregister 'cdc_ether' usb-ehci-platform-1, CDC Ethernet Device
[15970.406446] usb 1-1: new high-speed USB device number 4 using ehci-platform
[15970.610151] usb-storage 1-1:1.0: USB Mass Storage device detected
[15970.627079] scsi host0: usb-storage 1-1:1.0
[15971.107733] usb 1-1: USB disconnect, device number 4
[15971.676495] usb 1-1: new high-speed USB device number 5 using ehci-platform
[15971.903321] cdc_ether 1-1:1.0 eth1: register 'cdc_ether' at usb-ehci-platform-1, CDC Ethernet Device, 0c:5b:8f:27:9a:64
[15971.919255] cdc_ether 1-1:1.0 eth1: kevent 12 may have been dropped
[15971.927529] cdc_ether 1-1:1.0 eth1: kevent 11 may have been dropped
[15971.943525] cdc_ether 1-1:1.0 eth1: kevent 11 may have been dropped
[15971.966780] usb-storage 1-1:1.2: USB Mass Storage device detected
[15971.996670] scsi host0: usb-storage 1-1:1.2
[15973.027517] scsi 0:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
[15973.042839] sd 0:0:0:0: [sda] Attached SCSI removable disk
[15981.359086] print_req_error: 12 callbacks suppressed
[15981.359097] print_req_error: I/O error, dev mtdblock2, sector 8
[15981.392661] print_req_error: I/O error, dev mtdblock2, sector 8
[15981.398684] buffer_io_error: 4 callbacks suppressed
[15981.398693] Buffer I/O error on dev mtdblock2, logical block 1, async page read
[15981.412009] print_req_error: I/O error, dev mtdblock2, sector 8
[15981.418032] Buffer I/O error on dev mtdblock2, logical block 1, async page read
[15981.478161] print_req_error: I/O error, dev mtdblock4, sector 56
[15981.490758] print_req_error: I/O error, dev mtdblock4, sector 56
[15981.496870] Buffer I/O error on dev mtdblock4, logical block 7, async page read
[15981.570215] print_req_error: I/O error, dev mtdblock4, sector 56
[15981.576325] Buffer I/O error on dev mtdblock4, logical block 7, async page read
[15981.758814] print_req_error: I/O error, dev mtdblock7, sector 3184
[15981.765173] print_req_error: I/O error, dev mtdblock7, sector 3184
[15981.771454] Buffer I/O error on dev mtdblock7, logical block 398, async page read
[15981.941160] print_req_error: I/O error, dev mtdblock9, sector 440
[15981.986137] print_req_error: I/O error, dev mtdblock9, sector 440
[15981.992336] Buffer I/O error on dev mtdblock9, logical block 55, async page read
[15982.003706] Buffer I/O error on dev mtdblock9, logical block 55, async page read
]0;root@Router_NG1: ~root@Router_NG1:~# exit

Sieć nju (orange) zarówno E3372s-153 (HiLInk) jak E398 zgłasza że "nie wykryto karty SIM albo jest ona nieprawidłowa". Oba modemy wpięte przez USB, jak tez ten pierwszy przez router zgłaszają to samo. Ostatnio na ruterze E3372 raz na kilka dni zgłaszał coś podobnego, wystarczyło wyjąc go z rutera, włożyc ponownie i zalogować się (kod PIN).

Przez BT telefonem (Orange - inny SIM) siec działa.

Dało radę na chwilę i znowu się odłączyło. To coś z kartą, bo próbowałem jeszcze na e3131.
Dodatkowo potraktowałem kartę Kontaktem S.
Jest jakaś trzecia opcja czemu nie działa, czy prosić o wymianę karty?
Potraktować lekkim papierem ściernym samą kartę?
Dziwne to wszystko.

Tę kartę mam powyżej 5 lat, one też same z siebie umierają na starość?

No patrze na nią, i na nic mechanicznego mi nie wygląda.... Siedzi tam cąły czas. Cóż, trzeba zgłosić....

Generalnie to zwykłe metalowe styki, nie śniedzieją bo wilgoci to tam nie ma za wiele (a jak jest to modem pada ). Jak widzisz że to źle wygląda to czymś tam możesz przeczyścić.

Sorry, ale chyba coś wyrwałeś z kontekstu. O czym piszesz?