76

Odp: przerobienie Check Point 600 na openWRT

Cała masa kart na minipcie - szukaj czegoś na atherosie (qualcommie) od laptopów - zwykle do kupienia za parę zł z allegro.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

77

Odp: przerobienie Check Point 600 na openWRT

tam karta wifi na mini pci jest? można prosić o odświeżenie zdjęć pcb ? dzięki

Dom : router https://i.imgur.com/IuB6Zwy.png | TP-LINK T1700G-28TQ |Zyxel XGS-1210-12 | Dynalink WRX-36 | wax50 pro | rb hex poe gbit sfp | XPenology | kilka kamer reolink 5MP i jakieś tam jeszcze ustrojstwa połączone światłowodami, skrętką i wifi ,  apc smart ups 750 lcd smile
Podróżne : GL.Inet MT3000  zyxel nsa325 +6TB @ openwrt
http://tinyurl.com/bufferbloattest

78

Odp: przerobienie Check Point 600 na openWRT

ambrozy5 napisał/a:

tam karta wifi na mini pci jest? można prosić o odświeżenie zdjęć pcb ? dzięki

Na mpcie. Pasują half i całe.
Zdjęcia są na wiki OpenWrt:
https://openwrt.org/inbox/toh/check_poi … point_l-50

Mam i używam: Fujitsu Futro S720, Netgear R6220, Unielec U7621-06, TP-Linki 1043 V1, V2, Linksysy EA7500v2, AeroHive AP350, Linksys EA8500, ZTE MF286d.
Mam: D-Linki DWR-921, DWR-118, DWR-116, TP-Link WDR-4900 v1, Checkpoint L-50, Linksysy 1900ACS, LB-Link BL-W1200,

79

Odp: przerobienie Check Point 600 na openWRT

Królik napisał/a:
ambrozy5 napisał/a:

tam karta wifi na mini pci jest? można prosić o odświeżenie zdjęć pcb ? dzięki

Na mpcie. Pasują half i całe.
Zdjęcia są na wiki OpenWrt:
https://openwrt.org/inbox/toh/check_poi … point_l-50


no tak, nie patrzyłem tam jeszcze , ktoś zmieniał mu kartę wifi na ac?

Dom : router https://i.imgur.com/IuB6Zwy.png | TP-LINK T1700G-28TQ |Zyxel XGS-1210-12 | Dynalink WRX-36 | wax50 pro | rb hex poe gbit sfp | XPenology | kilka kamer reolink 5MP i jakieś tam jeszcze ustrojstwa połączone światłowodami, skrętką i wifi ,  apc smart ups 750 lcd smile
Podróżne : GL.Inet MT3000  zyxel nsa325 +6TB @ openwrt
http://tinyurl.com/bufferbloattest

80

Odp: przerobienie Check Point 600 na openWRT

Witajcie. Wczoraj przywiozłem jedną sztukę. Jest bez wifi i bez adsl. Poproszę o pomoc bo chyba coś poszło nie tak.

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.180 (cezary@eko.one.pl) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11006-3b6f079d8d)) #0 Wed Jun 3 13:29:37 2020
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] OF: fdt: Machine model: Check Point L-50
[    0.000000] Memory policy: Data cache writeback
[    0.000000] random: get_random_bytes called from 0xc0700980 with crng_init=0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console=ttyS0,115200
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 492636K/524288K available (4874K kernel code, 169K rwdata, 744K rodata, 20480K init, 208K bss, 31652K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc05c2af0   (5867 kB)
[    0.000000]       .init : 0xc0700000 - 0xc1b00000   (20480 kB)
[    0.000000]       .data : 0xc1b00000 - 0xc1b2a520   ( 170 kB)
[    0.000000]        .bss : 0xc1b2a520 - 0xc1b5e91c   ( 209 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000008] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[    0.000038] Switching to timer-based delay loop, resolution 5ns
[    0.000139] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
[    0.000161] pid_max: default: 32768 minimum: 301
[    0.000298] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000320] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000855] CPU: Testing write buffer coherency: ok
[    0.001594] Setting up static identity map for 0x100000 - 0x10003c
[    0.001865] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3
[    0.006266] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.006293] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.006386] pinctrl core: initialized pinctrl subsystem
[    0.007407] NET: Registered protocol family 16
[    0.007783] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.008753] cpuidle: using governor ladder
[    0.009105] Feroceon L2: Enabling L2
[    0.009149] Feroceon L2: Cache support initialised.
[    0.009423] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
[    0.009541] [Firmware Info]: /ocp@f1000000/ethernet-controller@76000/ethernet1-port@0: local-mac-address is not set
[    0.013254] No ATAGs?
[    0.029805] SCSI subsystem initialized
[    0.030657] usbcore: registered new interface driver usbfs
[    0.030715] usbcore: registered new interface driver hub
[    0.030772] usbcore: registered new device driver usb
[    0.032744] clocksource: Switched to clocksource orion_clocksource
[    0.033534] NET: Registered protocol family 2
[    0.034109] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.034164] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.034215] TCP: Hash tables configured (established 4096 bind 4096)
[    0.034293] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.034316] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.034444] NET: Registered protocol family 1
[    0.299314] Crashlog allocated RAM at address 0x3f00000
[    0.299986] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    0.304331] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.304344] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.533316] io scheduler noop registered
[    0.533331] io scheduler deadline registered (default)
[    0.534209] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[    0.535662] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
[    0.535681] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    0.535693] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[    0.535704] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.535932] PCI: bus0: Fast back to back transfers disabled
[    0.535947] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.536043] PCI: bus1: Fast back to back transfers enabled
[    0.536082] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.536510] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.538304] console [ttyS0] disabled
[    0.538371] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
[    1.018654] console [ttyS0] enabled
[    1.023308] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc
[    1.029688] nand: Samsung NAND 512MiB 3,3V 8-bit
[    1.034347] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.041958] Scanning device for bad blocks
[    1.194746] Bad eraseblock 1958 at 0x00000f4c0000
[    1.260534] Bad eraseblock 2763 at 0x000015960000
[    1.366419] 10 fixed-partitions partitions found on MTD device orion_nand
[    1.373253] Creating 10 MTD partitions on "orion_nand":
[    1.378503] 0x000000000000-0x0000000c0000 : "u-boot"
[    1.384029] 0x0000000c0000-0x000000100000 : "bootldr-env"
[    1.389924] 0x000000100000-0x000007a00000 : "ubi"
[    1.395631] 0x000007a00000-0x000008200000 : "kernel-2"
[    1.401293] 0x000008200000-0x00000f300000 : "rootfs-2"
[    1.407376] 0x00000f300000-0x000016c00000 : "default_sw"
[    1.413681] 0x000016c00000-0x000018400000 : "logs"
[    1.419059] 0x000018400000-0x000018500000 : "preset_cfg"
[    1.424895] 0x000018500000-0x000018600000 : "adsl"
[    1.430177] 0x000018600000-0x000020000000 : "storage"
[    1.436654] libphy: Fixed MDIO Bus: probed
[    1.441473] libphy: orion_mdio_bus: probed
[    1.472977] mv88e6085 f1072004.mdio-bus-mii:10: switch 0x1710 detected: Marvell 88E6171, revision 2
[    1.495171] random: fast init done
[    1.783187] libphy: mv88e6xxx SMI: probed
[    1.787808] mv88e6085 f1072004.mdio-bus-mii:11: switch 0x1710 detected: Marvell 88E6171, revision 2
[    2.031977] libphy: mv88e6xxx SMI: probed
[    2.036570] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[    2.843275] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:00:00:00:00:00
[    2.852470] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address 00:00:00:00:00:00
[    2.861303] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.867872] ehci-pci: EHCI PCI platform driver
[    2.872392] ehci-orion: EHCI orion driver
[    2.876607] orion-ehci f1050000.ehci: EHCI Host Controller
[    2.882144] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[    2.889974] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
[    2.922758] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[    2.929321] hub 1-0:1.0: USB hub found
[    2.933309] hub 1-0:1.0: 1 port detected
[    2.937684] usbcore: registered new interface driver usb-storage
[    2.943939] i2c /dev entries driver
[    2.950615] orion_wdt: Initial timeout 21 sec
[    2.955574] mvsdio f1090000.mvsdio: Got CD GPIO
[    3.236253] marvell-cesa f1030000.crypto: CESA device successfully registered
[    3.244315] NET: Registered protocol family 10
[    3.250688] Segment Routing with IPv6
[    3.254468] NET: Registered protocol family 17
[    3.258961] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    3.272319] 8021q: 802.1Q VLAN Support v1.8
[    3.282309] mv88e6085 f1072004.mdio-bus-mii:11: switch 0x1710 detected: Marvell 88E6171, revision 2
[    3.312816] usb 1-1: new high-speed USB device number 2 using orion-ehci
[    3.523753] hub 1-1:1.0: USB hub found
[    3.527624] hub 1-1:1.0: 4 ports detected
[    3.537532] libphy: mv88e6xxx SMI: probed
[    3.541666] DSA: switch 0 0 parsed
[    3.545115] DSA: switch 0 1 parsed
[    3.548552] DSA: tree 0 parsed
[    3.842759] usb 1-1.3: new high-speed USB device number 3 using orion-ehci
[    4.111819] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[    4.118558] scsi host0: usb-storage 1-1.3:1.0
[    4.344398] random: crng init done
[    4.459261] Generic PHY mv88e6xxx-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:00, irq=POLL)
[    4.480876] Generic PHY mv88e6xxx-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:01, irq=POLL)
[    4.497748] Generic PHY mv88e6xxx-0:02: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:02, irq=POLL)
[    4.514620] Generic PHY mv88e6xxx-0:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:03, irq=POLL)
[    4.531492] Generic PHY mv88e6xxx-0:04: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-0:04, irq=POLL)
[    5.204950] scsi 0:0:0:0: Direct-Access     Intenso  Premium Line     8.07 PQ: 0 ANSI: 2
[    5.215151] sd 0:0:0:0: [sda] 16343040 512-byte logical blocks: (8.37 GB/7.79 GiB)
[    5.223263] sd 0:0:0:0: [sda] Write Protect is off
[    5.228505] sd 0:0:0:0: [sda] No Caching mode page found
[    5.233872] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    5.512079] Generic PHY mv88e6xxx-2:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-2:00, irq=POLL)
[    5.529036] Generic PHY mv88e6xxx-2:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-2:01, irq=POLL)
[    5.545909] Generic PHY mv88e6xxx-2:02: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-2:02, irq=POLL)
[    5.564825] Generic PHY mv88e6xxx-2:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=mv88e6xxx-2:03, irq=POLL)
[    5.620860] Generic PHY fixed-0:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:03, irq=POLL)
[    5.632240] UBI error: no valid UBI magic found inside mtd2
[    5.638058] hctosys: unable to open rtc device (rtc0)
[    6.175078]  sda: sda1
[    6.179637] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    6.242446] Freeing unused kernel memory: 20480K
[    6.256881] init: Console is alive
[    6.260440] init: - watchdog -
[    6.284271] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    6.318510] ehci-platform: EHCI generic platform driver
[    6.325652] usbcore: registered new interface driver uas
[    6.331372] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    6.341364] init: - preinit -
/etc/preinit: line 103: arithmetic syntax error
/etc/preinit: line 103: arithmetic syntax error
/etc/preinit: line 103: arithmetic syntax error
/etc/preinit: line 103: arithmetic syntax error
/etc/preinit: line 103: arithmetic syntax error
/etc/preinit: line 103: arithmetic syntax error
/etc/preinit: line 103: arithmetic syntax error
/etc/preinit: line 103: arithmetic syntax error
/etc/preinit: line 103: arithmetic syntax error
RTNETLINK answers: Network is down
sendto(): Network unreachable
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    9.951764] procd: - early -
[    9.955193] procd: - watchdog -
Failed to connect to ubus
[   10.543687] procd: - watchdog -
[   10.547036] procd: - ubus -
[   10.601129] procd: - init -
Please press Enter to activate this console.
[   10.906034] kmodloader: loading kernel modules from /etc/modules.d/*
[   10.961333] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[   10.988257] Key type dns_resolver registered
[   11.020504] urngd: v1.0.2 started.
[   11.032993] RPC: Registered named UNIX socket transport module.
[   11.038940] RPC: Registered udp transport module.
[   11.043697] RPC: Registered tcp transport module.
[   11.048418] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   11.084108] tun: Universal TUN/TAP device driver, 1.6
[   11.109756] gre: GRE over IPv4 demultiplexor driver
[   11.123791] ip_gre: GRE over IPv4 tunneling driver
[   11.195654] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   11.261175] NFS: Registering the id_resolver key type
[   11.266317] Key type id_resolver registered
[   11.270517] Key type id_legacy registered
[   11.326191] Mirror/redirect action on
[   11.359616] u32 classifier
[   11.362337]     input device check on
[   11.366055]     Actions configured
[   11.409401] GACT probability on
[   11.426221] Simple TC action Loaded
[   11.468390] fuse init (API version 7.26)
[   11.486246] usbcore: registered new interface driver cdc_acm
[   11.491935] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   11.542242] usbcore: registered new interface driver cdc_wdm
[   11.581289] Ebtables v2.0 registered
[   11.589475] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.633997] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[   12.002492] usbcore: registered new interface driver ums-alauda
[   12.043427] usbcore: registered new interface driver ums-cypress
[   12.061456] usbcore: registered new interface driver ums-datafab
[   12.073364] usbcore: registered new interface driver ums-freecom
[   12.096230] usbcore: registered new interface driver ums-isd200
[   12.119197] usbcore: registered new interface driver ums-jumpshot
[   12.143459] usbcore: registered new interface driver ums-karma
[   12.166786] usbcore: registered new interface driver ums-sddr09
[   12.178465] usbcore: registered new interface driver ums-sddr55
[   12.190704] usbcore: registered new interface driver ums-usbat
[   12.228668] usbcore: registered new interface driver usblp
[   12.276503] usbcore: registered new interface driver usbserial
[   12.282424] usbcore: registered new interface driver usbserial_generic
[   12.289067] usbserial: USB Serial support registered for generic
[   12.458977] xt_time: kernel timezone is -0000
[   12.474418] usbcore: registered new interface driver cdc_ether
[   12.493714] usbcore: registered new interface driver cdc_ncm
[   12.506990] usbcore: registered new interface driver huawei_cdc_ncm
[   12.547043] PPP generic driver version 2.4.2
[   12.563912] NET: Registered protocol family 24
[   12.569781] PPTP driver version 0.8.5
[   12.580632] usbcore: registered new interface driver qmi_wwan
[   12.598275] usbcore: registered new interface driver rndis_host
[   12.613742] usbcore: registered new interface driver sierra
[   12.619405] usbserial: USB Serial support registered for Sierra USB modem
[   12.640324] usbcore: registered new interface driver sierra_net
[   12.659957] usbcore: registered new interface driver cdc_mbim
[   12.684050] usbcore: registered new interface driver option
[   12.689718] usbserial: USB Serial support registered for GSM modem (1-port)
[   12.706935] usbcore: registered new interface driver qcserial
[   12.712816] usbserial: USB Serial support registered for Qualcomm USB modem
[   12.731640] kmodloader: done loading kernel modules from /etc/modules.d/*
[   15.548459] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   19.376715] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   32.169238] IPv6: ADDRCONF(NETDEV_UP): lan1: link is not ready
[   32.644630] IPv6: ADDRCONF(NETDEV_UP): lan2: link is not ready
[   33.150577] IPv6: ADDRCONF(NETDEV_UP): lan3: link is not ready
[   33.602827] IPv6: ADDRCONF(NETDEV_UP): lan4: link is not ready
[   33.732487] IPv6: ADDRCONF(NETDEV_UP): lan5: link is not ready
[   33.846430] IPv6: ADDRCONF(NETDEV_UP): lan6: link is not ready
[   33.946204] IPv6: ADDRCONF(NETDEV_UP): lan7: link is not ready
[   34.065925] IPv6: ADDRCONF(NETDEV_UP): lan8: link is not ready
[   34.193749] IPv6: ADDRCONF(NETDEV_UP): dmz: link is not ready
[   34.393014] IPv6: ADDRCONF(NETDEV_UP): dmz: link is not ready
[   34.400214] IPv6: ADDRCONF(NETDEV_UP): lan1: link is not ready
[   34.456104] IPv6: ADDRCONF(NETDEV_UP): lan2: link is not ready
[   34.503409] IPv6: ADDRCONF(NETDEV_UP): lan3: link is not ready
[   34.510722] IPv6: ADDRCONF(NETDEV_UP): lan4: link is not ready
[   34.579789] IPv6: ADDRCONF(NETDEV_UP): lan5: link is not ready
[   34.620064] IPv6: ADDRCONF(NETDEV_UP): lan6: link is not ready
[   34.654355] IPv6: ADDRCONF(NETDEV_UP): lan7: link is not ready
[   34.661650] IPv6: ADDRCONF(NETDEV_UP): lan8: link is not ready
[   36.815906] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.



BusyBox v1.30.1 () built-in shell (ash)


  _____                             _         _____  _
 |  __ \                           | |       |  __ \| |
 | |  \/ __ _ _ __ __ _  ___  _   _| | ___   | |__) | |
 | | __ / _` | '__/ _` |/ _ \| | | | |/ _ \  |  ___/| |
 | |_\ \ (_| | | | (_| | (_) | |_| | |  __/  | |    | |__
  \____/\__,_|_|  \__, |\___/ \__, |_|\___|  |_|    |____|
                   __/ |       __/ |
                  |___/       |___/

 -----------------------------------------------------------------------------
 |                                                                           |
 | Gargoyle PL 1.13.0.0pre5 (20628a9f)                                       |
 | OpenWrt 19.07-SNAPSHOT, r11104-e752fc1ff9                                 |
 |                                                                           |
 | Build time: 2020-06-07 13:04 CEST                                         |
 | Cezary Jackiewicz (obsy), http://eko.one.pl                               |
 |                                                                           |
 -----------------------------------------------------------------------------
 | Machine: Check Point L-50                                                 |
 | Uptime: 0d, 00:02:40                                                      |
 | Load: 0.14 0.19 0.08                                                      |
 | Flash:                                                                    |
 | Memory: total: 501.1MB, free: 486.9MB, used: 2%                           |
 | Leases: 0                                                                 |
 | lan: static, 192.168.1.1                                                  |
 | wan: dhcp, ?                                                              |
 | wan6: dhcpv6, ?                                                           |
 -----------------------------------------------------------------------------
root@Gargoyle:/# 

81

Odp: przerobienie Check Point 600 na openWRT

Jak wgrywasz czyste OpenWrt Cezarego, to jest to samo?

Poza tym preinit są jakieś problemy?

Mam i używam: Fujitsu Futro S720, Netgear R6220, Unielec U7621-06, TP-Linki 1043 V1, V2, Linksysy EA7500v2, AeroHive AP350, Linksys EA8500, ZTE MF286d.
Mam: D-Linki DWR-921, DWR-118, DWR-116, TP-Link WDR-4900 v1, Checkpoint L-50, Linksysy 1900ACS, LB-Link BL-W1200,

82

Odp: przerobienie Check Point 600 na openWRT

Ciekawe, bo preinit nie ma 103 linii, chyba że liczy to ze skryptami które są włączone. Pokaż zawartość bootldr-env bo może nie masz adresu mac ustawionego.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

83

Odp: przerobienie Check Point 600 na openWRT

Panowie to jest mój pierwszy raz z konsolą więc możliwe, że coś robię źle. Mac adresy interfejsów wklejamy te z poradnika czy te swoje? (jeśli swoje to skąd je pobrać?)
Jak wklejam polecenie setenv eth1_addr 00:1C:XX:XX:XX:6C to dostaje odpowiedz :## Error: flags type check failure for "eth1addr" <= "00:1C:XX:XX:XX:6C" (type: m)
## Error inserting "eth1addr" variable, errno=1
Proszę o wyrozumiałość i z góry dziękuje za pomoc

84

Odp: przerobienie Check Point 600 na openWRT

00:1C:XX:XX:XX:6C to nie jest prawidłowy mac adres tylko przykład. Miałeś podstawić swój własny mac adres który był pierwotnie w urządzeniu. Miałeś zrobić backup tego, zrobiłeś, spisałeś sobie swoje adresy MAC?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

85

Odp: przerobienie Check Point 600 na openWRT

Niestety nie zrobiłem. Poleciałem według poradnika kolegi @szakal a dopiero później doczytałem o backupie. Da się to jakoś rozwiązać?

86

Odp: przerobienie Check Point 600 na openWRT

A nie masz na obudowanie napisanego adresu mac?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

87

Odp: przerobienie Check Point 600 na openWRT

Mam. A pozostałe?

88

Odp: przerobienie Check Point 600 na openWRT

Naprawdę nie widzisz pozostałe zwiększają się co jeden?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

89

Odp: przerobienie Check Point 600 na openWRT

zwiększyłem o jeden ale dalej coś nie tak.
root@Gargoyle:/# bootldr-env
/bin/ash: bootldr-env: not found

   30.102851] br-lan: port 1(lan1) entered blocking state
[   30.108112] br-lan: port 1(lan1) entered disabled state

90

Odp: przerobienie Check Point 600 na openWRT

bootldr-env to nazwa partycji a nie polecenie do wykonania. Jak chcesz zobaczyć co tam jest to zrób

strings /dev/mtd1

lub

hexdump -C /dev/mtd1

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

91 (edytowany przez piotrek1111 2020-06-26 18:28:43)

Odp: przerobienie Check Point 600 na openWRT

Problemu z preinit już nie ma. Chyba coś źle zrobiłem z tymi adresami mac bo nie mogę się dostać przez przeglądarkę. Karty wifi nie da rady podłączyć bo po drugiej stronie płyty brak wlutowanego złącza. Jakieś pomysły aby wejść przez przeglądarkę?
Czy to normalne że konsola działa z kwbot? Nie powinno pokazywać od razu po włączeniu?

92

Odp: przerobienie Check Point 600 na openWRT

A przez ssh możesz?

Zainstalowałeś może obraz, czysty bez gui? smile

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

93

Odp: przerobienie Check Point 600 na openWRT

Później sprawdzę przez ssh bo nie ma mnie teraz w domu. Zainstalowałem Gargoyle więc musi być gui

94

Odp: przerobienie Check Point 600 na openWRT

Dziękuje za pomoc. Zrobiłem od początku i teraz działa ok. Da się pod to złącze jakoś podpiąć kartę wifi czy pozostaje jedynie karta na usb?

https://imgur.com/a/alg4nii

95

Odp: przerobienie Check Point 600 na openWRT

Ogólnie się da, ale ty nie masz elementów na płytce. Jak masz umiejętności to sobie dolutuj co trzeba.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

96

Odp: przerobienie Check Point 600 na openWRT

Zrób zdjęcia płyty, zobaczymy ile brakuje

Mam i używam: Fujitsu Futro S720, Netgear R6220, Unielec U7621-06, TP-Linki 1043 V1, V2, Linksysy EA7500v2, AeroHive AP350, Linksys EA8500, ZTE MF286d.
Mam: D-Linki DWR-921, DWR-118, DWR-116, TP-Link WDR-4900 v1, Checkpoint L-50, Linksysy 1900ACS, LB-Link BL-W1200,

97

Odp: przerobienie Check Point 600 na openWRT

Za lutowanie to się nie biorę bo może płyta tego nie przeżyć. Do czego służy to złącze (drugie zdjęcie)? To jest oryginalne tylko ja zdemontowałem metalową osłone?
Jaką kartę na usb polecacie?

98

Odp: przerobienie Check Point 600 na openWRT

Znalazłem u siebie kartę Fritz Stick N v2 (Ralink RT5572), po zainstalowaniu kmod-rt2x00-usb karta jest widzialna w gui. Co prawda nie widzi mi 5 GHz ale mam problem z połączeniem. Widać ssid i po wpisaniu hasła cały czas jest pobieranie dresu ip. Coś trzeba jeszcze doinstalować?

config wifi-device 'radio0'
    option type 'mac80211'
    option path 'platform/ocp@f1000000/f1050000.ehci/usb1/1-1/1-1.1/1-1.1:1.0'
    option noscan '1'
    option channel '5'
    option country 'PL'
    option hwmode '11g'
    option htmode 'HT40-'

config wifi-iface 'ap_g'
    option device 'radio0'
    option mode 'ap'
    option network 'lan'
    option disassoc_low_ack '0'
    option ssid 'Test'
    option encryption 'psk2'
    option key '12345678'
.

99

Odp: przerobienie Check Point 600 na openWRT

wpad-mini jeżeli nie masz.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

100

Odp: przerobienie Check Point 600 na openWRT

Jest już zainstalowane.