1

Temat: debian 9 Lark 7i win z3735g "I2C/SD/UART"

Witam,

pod Windowsem:

do I2C controller jest połączeni:

1 camera OV2680
2 camera + Realtek I2S Audio codec
3 BMA2x2 accelerometer
4 KMDF HID Touch I2C Device
5 Battery ACPI + Intel battery management + Intel Power Management IC

Do host Intel SD:

1 NCard
2 RTL8723BS
3 Generic SD Card

UART Controller:

Reaktek Bluetooth UART BUS driver -> Bluetooth

Pod androidem 4.4.4 r5 i 7.1 r2

Dzilala touch screen, wifi, BT, audio (speaker only), screen rotation.

FW /system/lib/fimeware

*******************************************************************************

Na Debiane nie działa:

touch screen, wifi, BT, audio, acpi (power)

*******************************************************************************

Czy da się wykorzystać android image 7.1 jego FW dla Debiana?

Czy jest jakiś sposób na uruchomienie ww urządzeń po Debianem?

lscpi i lsusb dmesg nic czekawego nie pokazuja ( przynajmej mi smile ).

Dziekuje,

BR,
Zenia

2

Odp: debian 9 Lark 7i win z3735g "I2C/SD/UART"

UPDATE. mam na eksperymenty 4 ustrojstwa

3

Odp: debian 9 Lark 7i win z3735g "I2C/SD/UART"

dmesg:
[    0.000000] Linux version 4.9.0-8-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.130-2 (2018-10-27)
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000037a76fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000037a77000-0x0000000037a7ffff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000037a80000-0x0000000037afffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000037b00000-0x000000003bb27fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003bb28000-0x000000003bb87fff] type 20
[    0.000000] BIOS-e820: [mem 0x000000003bb88000-0x000000003bda7fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003bda8000-0x000000003bda8fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003bda9000-0x000000003bda9fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003bdaa000-0x000000003bdabfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003bdac000-0x000000003bdacfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003bdad000-0x000000003c7fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003cc00000-0x000000003cc3afff] usable
[    0.000000] BIOS-e820: [mem 0x000000003cc3b000-0x000000003cc46fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003cc47000-0x000000003ccb6fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003ccb7000-0x000000003ccf6fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003ccf7000-0x000000003ccfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  ACPI 2.0=0x3ccf6014  ESRT=0x3bc98010  SMBIOS=0x3bd5f000
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LARK Ultimate 7i win/Ultimate 7i win, BIOS LARK.W71JABMR03 04/16/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3cd00 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFD00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask FC0000000 write-back
[    0.000000]   2 base 03E000000 mask FFE000000 uncachable
[    0.000000]   3 base 03D000000 mask FFF000000 uncachable
[    0.000000]   4 base 03CE00000 mask FFFE00000 uncachable
[    0.000000]   5 base 03CD00000 mask FFFF00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] esrt: Reserving ESRT space from 0x000000003bc98010 to 0x000000003bc98048.
[    0.000000] initial memory mapped: [mem 0x00000000-0x0edfffff]
[    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[    0.000000] BRK [0x0e9c8000, 0x0e9c8fff] PGTABLE
[    0.000000] BRK [0x0e9c9000, 0x0e9cafff] PGTABLE
[    0.000000] BRK [0x0e9cb000, 0x0e9cbfff] PGTABLE
[    0.000000] BRK [0x0e9cc000, 0x0e9ccfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35e7b000-0x36f34fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000003CCF6014 000024 (v02 INSYDE)
[    0.000000] ACPI: XSDT 0x000000003CCCE188 0000E4 (v01 INSYDE INSYDE   00000003      01000013)
[    0.000000] ACPI: FACP 0x000000003CCEF000 00010C (v05 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000003CCDA000 00F0C9 (v02 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000003CCF5000 000236 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.000000] ACPI: TCPA 0x000000003CCF4000 000032 (v02 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000003CCF3000 000055 (v03 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000003CCF2000 000042 (v01 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.000000] ACPI: OEM0 0x000000003CCF1000 000084 (v05 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: DBG2 0x000000003CCF0000 000072 (v00 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000003CCEE000 000038 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x000000003CCED000 000104 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000003CCEC000 00006C (v03 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000003CCEB000 00003C (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: SLIC 0x000000003CCEA000 000176 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000003CCD9000 000603 (v01 INSYDE CpuDptf  00000003 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000003CCD6000 00249C (v01 INSYDE DptfTab  00000003 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000003CCD5000 000058 (v01 INSYDE LowPwrM  00000003 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000003CCD4000 0000FF (v01 INSYDE SoCDptf  00000003 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000003CCD3000 00043A (v01 INSYDE Tpm2Tabl 00001000 ACPI 00040000)
[    0.000000] ACPI: TPM2 0x000000003CCD2000 000034 (v03 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000003CCD1000 000763 (v01 INSYDE CpuPm    00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000003CCD0000 000290 (v01 INSYDE Cpu0Tst  00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000003CCCF000 00017A (v01 INSYDE ApTst    00003000 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000003CCCD000 000044 (v01 INSYDE INSYDE   00000002 ACPI 00040000)
[    0.000000] ACPI: CSRT 0x000000003CCCC000 00014C (v00 INSYDE INSYDE   00000005 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x000000003CCCB000 000038 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 83MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000379fdfff]
[    0.000000]   HighMem  [mem 0x00000000379fe000-0x000000003ccfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000008efff]
[    0.000000]   node   0: [mem 0x0000000000090000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000037a76fff]
[    0.000000]   node   0: [mem 0x0000000037b00000-0x000000003bb27fff]
[    0.000000]   node   0: [mem 0x000000003bda8000-0x000000003bda8fff]
[    0.000000]   node   0: [mem 0x000000003bdaa000-0x000000003bdabfff]
[    0.000000]   node   0: [mem 0x000000003bdad000-0x000000003c7fffff]
[    0.000000]   node   0: [mem 0x000000003cc00000-0x000000003cc3afff]
[    0.000000]   node   0: [mem 0x000000003ccf7000-0x000000003ccfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ccfffff]
[    0.000000] On node 0 totalpages: 246485
[    0.000000] free_area_init_node: node 0, pgdat ce7fd880, node_mem_map f716a024
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   Normal zone: 1967 pages used for memmap
[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
[    0.000000]   HighMem zone: 19259 pages, LIFO batch:3
[    0.000000] Using APIC driver default
[    0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.000000] Reserving Intel graphics memory at 0x000000003cf00000-0x000000003eefffff
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] e820: [mem 0x3ef00000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 20 pages/cpu @f7117000 s50828 r0 d31092 u81920
[    0.000000] pcpu-alloc: s50828 r0 d31092 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 244482
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-686-pae root=UUID=9769a69f-4659-4a00-9738-a4c0200d7e79 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0003cd00)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 923244K/985940K available (5895K kernel code, 662K rwdata, 1724K rodata, 760K init, 456K bss, 62696K reserved, 0K cma-reserved, 51488K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
                   pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
                   vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
                     .init : 0xce81a000 - 0xce8d8000   ( 760 kB)
                     .data : 0xce5c22b0 - 0xce818b00   (2394 kB)
                     .text : 0xce000000 - 0xce5c22b0   (5896 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 32.
[    0.000000]     RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[    0.000000] NR_IRQS:2304 nr_irqs:1024 0
[    0.000000] CPU 0 irqstacks, hard=f582e000 soft=f5830000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Detected 1332.800 MHz processor
[    0.000042] Calibrating delay loop (skipped), value calculated using timer frequency.. 2665.60 BogoMIPS (lpj=5331200)
[    0.000050] pid_max: default: 32768 minimum: 301
[    0.000105] ACPI: Core revision 20160831
[    0.037524] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.038719] Security Framework initialized
[    0.038724] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.038739] AppArmor: AppArmor disabled by boot time parameter
[    0.038784] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.038789] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.039352] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.039354] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.039365] mce: CPU supports 6 MCE banks
[    0.039376] CPU0: Thermal monitoring enabled (TM1)
[    0.039384] process: using mwait in idle threads
[    0.039394] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.039398] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.039403] Spectre V2 : Mitigation: Full generic retpoline
[    0.039404] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.039805] Freeing SMP alternatives memory: 24K
[    0.042751] ftrace: allocating 24134 entries in 48 pages
[    0.076810] smpboot: Max logical packages: 1
[    0.076821] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.076874] TSC deadline timer enabled
[    0.076878] smpboot: CPU0: Intel(R) Atom(TM) CPU  Z3735G @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x8)
[    0.076889] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.076914] ... version:                3
[    0.076916] ... bit width:              40
[    0.076917] ... generic registers:      2
[    0.076920] ... value mask:             000000ffffffffff
[    0.076922] ... max period:             0000007fffffffff
[    0.076923] ... fixed-purpose events:   3
[    0.076925] ... event mask:             0000000700000003
[    0.078684] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.079149] CPU 1 irqstacks, hard=f5a06000 soft=f5a08000
[    0.079152] x86: Booting SMP configuration:
[    0.079155] .... node  #0, CPUs:      #1
[    0.079349] Initializing CPU#1
[    0.081958] CPU 2 irqstacks, hard=f5a3c000 soft=f5a3e000
[    0.081962]  #2
[    0.082017] Initializing CPU#2
[    0.084612] CPU 3 irqstacks, hard=f5a92000 soft=f5a94000
[    0.084615]  #3
[    0.084668] Initializing CPU#3
[    0.086889] x86: Booted up 1 node, 4 CPUs
[    0.086895] smpboot: Total of 4 processors activated (10662.40 BogoMIPS)
[    0.088068] devtmpfs: initialized
[    0.088577] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    0.088582] PM: Registering ACPI NVS region [mem 0x3cc47000-0x3ccb6fff] (458752 bytes)
[    0.088750] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.088759] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.088874] pinctrl core: initialized pinctrl subsystem
[    0.089206] NET: Registered protocol family 16
[    0.101513] cpuidle: using governor ladder
[    0.113526] cpuidle: using governor menu
[    0.113615] ACPI: bus type PCI registered
[    0.113619] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.113777] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.113782] PCI: not using MMCONFIG
[    0.113784] PCI: Using configuration type 1 for base access
[    0.125914] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.126747] ACPI: Added _OSI(Module Device)
[    0.126751] ACPI: Added _OSI(Processor Device)
[    0.126754] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.126757] ACPI: Added _OSI(Processor Aggregator Device)
[    0.154612] ACPI: Dynamic OEM Table Load:
[    0.154637] ACPI: SSDT 0x00000000F5A9C800 000501 (v01 PmRef  Cpu0Ist  00003000 INTL 20130117)
[    0.155445] ACPI: Dynamic OEM Table Load:
[    0.155467] ACPI: SSDT 0x00000000F5A9C000 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.157103] ACPI: Dynamic OEM Table Load:
[    0.157123] ACPI: SSDT 0x00000000F5A9EE00 00015F (v01 PmRef  ApIst    00003000 INTL 20130117)
[    0.157850] ACPI: Dynamic OEM Table Load:
[    0.157870] ACPI: SSDT 0x00000000F5B23000 00008D (v01 PmRef  ApCst    00003000 INTL 20130117)
[    0.162612] ACPI: Interpreter enabled
[    0.162657] ACPI: (supports S0 S5)
[    0.162661] ACPI: Using IOAPIC for interrupt routing
[    0.162757] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.171374] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] not reserved in ACPI motherboard resources
[    0.171379] PCI: not using MMCONFIG
[    0.171389] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.174851] ACPI: Power Resource [USBC] (on)
[    0.175863] ACPI: Power Resource [WWPR] (off)
[    0.184843] ACPI: Power Resource [PLPE] (on)
[    0.195762] ACPI: Power Resource [CLK0] (on)
[    0.196044] ACPI: Power Resource [P28P] (off)
[    0.196187] ACPI: Power Resource [P18P] (off)
[    0.199585] ACPI: Power Resource [CLK0] (on)
[    0.199724] ACPI: Power Resource [CLK1] (on)
[    0.208663] ACPI: Power Resource [P28X] (off)
[    0.208807] ACPI: Power Resource [P18X] (off)
[    0.208965] ACPI: Power Resource [P28T] (off)
[    0.209116] ACPI: Power Resource [P18T] (off)
[    0.209258] ACPI: Power Resource [P1XT] (off)
[    0.220647] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.220661] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.220805] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.220815] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.221617] PCI host bridge to bus 0000:00
[    0.221625] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.221630] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.221635] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.221639] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.221644] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.221649] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.221653] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.221658] pci_bus 0000:00: root bus resource [mem 0x48c00000-0x48ffffff window]
[    0.221662] pci_bus 0000:00: root bus resource [mem 0x3cf00001-0x3ef00000 window]
[    0.221667] pci_bus 0000:00: root bus resource [mem 0x40000000-0x488ffffe window]
[    0.221671] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff window]
[    0.221677] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.221703] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    0.221932] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    0.221953] pci 0000:00:02.0: reg 0x10: [mem 0x48000000-0x483fffff]
[    0.221970] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x47ffffff pref]
[    0.221986] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x1007]
[    0.222237] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[    0.222263] pci 0000:00:14.0: reg 0x10: [mem 0x48800000-0x4880ffff 64bit]
[    0.222346] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.222556] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    0.222582] pci 0000:00:1a.0: reg 0x10: [mem 0x48700000-0x487fffff]
[    0.222597] pci 0000:00:1a.0: reg 0x14: [mem 0x48600000-0x486fffff]
[    0.222701] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.222913] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    0.223184] pci_bus 0000:00: on NUMA node 0
[    0.224214] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.224438] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.224658] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.224880] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.225101] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.225322] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.225543] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.225764] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.247519] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.247524] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.247528] vgaarb: loaded
[    0.247530] vgaarb: bridge control possible 0000:00:02.0
[    0.247660] Registered efivars operations
[    0.254504] PCI: Using ACPI for IRQ routing
[    0.254511] PCI: pci_cache_line_size set to 64 bytes
[    0.254542] Expanded resource reserved due to conflict with PCI Bus 0000:00
[    0.254551] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.254555] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.254559] e820: reserve RAM buffer [mem 0x37a77000-0x37ffffff]
[    0.254562] e820: reserve RAM buffer [mem 0x3bb28000-0x3bffffff]
[    0.254567] e820: reserve RAM buffer [mem 0x3bda9000-0x3bffffff]
[    0.254570] e820: reserve RAM buffer [mem 0x3bdac000-0x3bffffff]
[    0.254574] e820: reserve RAM buffer [mem 0x3c800000-0x3fffffff]
[    0.254580] e820: reserve RAM buffer [mem 0x3cc3b000-0x3fffffff]
[    0.254586] e820: reserve RAM buffer [mem 0x3cd00000-0x3fffffff]
[    0.255087] clocksource: Switched to clocksource refined-jiffies
[    0.275469] VFS: Disk quotas dquot_6.6.0
[    0.275518] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.275734] pnp: PnP ACPI init
[    0.275901] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.276103] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.276109] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.276115] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.276120] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.276125] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.276135] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.276489] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.281183] pnp: PnP ACPI: found 3 devices
[    0.281188] PnPBIOS: Disabled
[    0.287549] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.287555] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.287559] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.287564] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.287569] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.287574] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.287579] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.287584] pci_bus 0000:00: resource 11 [mem 0x48c00000-0x48ffffff window]
[    0.287588] pci_bus 0000:00: resource 12 [mem 0x3cf00001-0x3ef00000 window]
[    0.287593] pci_bus 0000:00: resource 13 [mem 0x40000000-0x488ffffe window]
[    0.287598] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed40fff window]
[    0.287805] NET: Registered protocol family 2
[    0.288277] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.288316] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.288375] TCP: Hash tables configured (established 8192 bind 8192)
[    0.288416] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.288446] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.288539] NET: Registered protocol family 1
[    0.288573] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.288992] PCI: CLS 64 bytes, default 64
[    0.289125] Unpacking initramfs...
[    1.078521] Freeing initrd memory: 17128K
[    1.079704] audit: initializing netlink subsys (disabled)
[    1.079740] audit: type=2000 audit(1544474233.004:1): initialized
[    1.080618] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    1.080717] zbud: loaded
[    1.082575] bounce: pool size: 64 pages
[    1.082615] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.082708] io scheduler noop registered
[    1.082711] io scheduler deadline registered
[    1.082758] io scheduler cfq registered (default)
[    1.082954] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.082971] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.083052] efifb: probing for efifb
[    1.083089] efifb: framebuffer at 0x40000000, using 2432k, total 2432k
[    1.083092] efifb: mode is 1024x600x32, linelength=4096, pages=1
[    1.083094] efifb: scrolling: redraw
[    1.083098] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.092810] Console: switching to colour frame buffer device 128x37
[    1.102114] fb0: EFI VGA frame buffer device
[    1.102139] intel_idle: MWAIT substates: 0x33000020
[    1.102143] intel_idle: v0.4.1 model 0x37
[    1.102637] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.107732] GHES: HEST is not enabled!
[    1.108592] isapnp: Scanning for PnP cards...
[    1.463414] isapnp: No Plug & Play device found
[    1.463808] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.484090] 00:02: ttyS0 at I/O 0x3f8 (irq = 201, base_baud = 115200) is a 16550A
[    1.506002] 80860F0A:00: ttyS1 at MMIO 0x4891b000 (irq = 191, base_baud = 2764800) is a 16550A
[    1.528830] 80860F0A:01: ttyS2 at MMIO 0x4891d000 (irq = 192, base_baud = 2764800) is a 16550A
[    1.529699] hpet: number irqs doesn't agree with number of timers
[    1.529786] Linux agpgart interface v0.103
[    1.531564] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.566503] i8042: No controller found
[    2.567017] mousedev: PS/2 mouse device common for all mice
[    2.567319] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    2.567334] rtc_cmos 00:00: no alarms, y3k, 242 bytes nvram
[    2.567358] intel_pstate: Intel P-state driver initializing
[    2.570354] ledtrig-cpu: registered to indicate activity on CPUs
[    2.573871] NET: Registered protocol family 10
[    2.576172] mip6: Mobile IPv6
[    2.576185] NET: Registered protocol family 17
[    2.576224] mpls_gso: MPLS GSO support
[    2.578069] microcode: sig=0x30678, pf=0x2, revision=0x82b
[    2.579159] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.579179] Using IPI No-Shortcut mode
[    2.581602] registered taskstats version 1
[    2.581701] zswap: loaded using pool lzo/zbud
[    2.583217] ima: No TPM chip found, activating TPM-bypass!
[    2.583231] ima: Allocated hash algorithm: sha256
[    2.585242] rtc_cmos 00:00: setting system clock to 2018-12-10 20:37:14 UTC (1544474234)
[    2.585435] PM: Hibernation image not present or could not be loaded.
[    2.586348] Freeing unused kernel memory: 760K
[    2.587008] Write protecting the kernel text: 5900k
[    2.587650] Write protecting the kernel read-only data: 1728k
[    2.587652] NX-protecting the kernel data: 4340k
[    2.588138] ------------[ cut here ]------------
[    2.588147] WARNING: CPU: 3 PID: 1 at /build/linux-QmD0TC/linux-4.9.130/arch/x86/mm/dump_pagetables.c:227 note_page+0x692/0x860
[    2.588151] x86/mm: Found insecure W+X mapping at address f8230000/0xf8230000
[    2.588153] Modules linked in:
[    2.588160] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.9.0-8-686-pae #1 Debian 4.9.130-2
[    2.588162] Hardware name: LARK Ultimate 7i win/Ultimate 7i win, BIOS LARK.W71JABMR03 04/16/2015
[    2.588165]  f58f5ecc ce2fd562 f58f5ee0 00000000 ce06944a ce6b12f4 f58f5f00 00000001
[    2.588175]  ce6b132c 000000e3 ce060ac2 000000e3 00000009 ce060ac2 00000002 f58f5f64
[    2.588184]  00000000 f58f5eec ce0694b6 00000009 00000000 f58f5ee0 ce6b12f4 f58f5f00
[    2.588193] Call Trace:
[    2.588200]  [<ce2fd562>] ? dump_stack+0x55/0x73
[    2.588205]  [<ce06944a>] ? __warn+0xea/0x110
[    2.588209]  [<ce060ac2>] ? note_page+0x692/0x860
[    2.588212]  [<ce060ac2>] ? note_page+0x692/0x860
[    2.588216]  [<ce0694b6>] ? warn_slowpath_fmt+0x46/0x60
[    2.588220]  [<ce060ac2>] ? note_page+0x692/0x860
[    2.588224]  [<ce060f55>] ? ptdump_walk_pgd_level_core+0x2c5/0x300
[    2.588230]  [<ce5b8020>] ? rest_init+0x70/0x70
[    2.588234]  [<ce5b804c>] ? kernel_init+0x2c/0x100
[    2.588239]  [<ce093701>] ? schedule_tail+0x11/0x50
[    2.588242]  [<ce5b8020>] ? rest_init+0x70/0x70
[    2.588246]  [<ce5bf13c>] ? ret_from_fork+0x30/0x3c
[    2.588249] ---[ end trace 1e2512a4c0e4f63a ]---
[    2.588381] x86/mm: Checked W+X mappings: FAILED, 105 W+X pages found.
[    2.682205] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.682912] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.690044] random: udevadm: uninitialized urandom read (16 bytes read)
[    2.777011] sdhci: Secure Digital Host Controller Interface driver
[    2.777015] sdhci: Copyright(c) Pierre Ossman
[    2.803802] [Firmware Bug]: No valid trip found
[    2.807882] ACPI: bus type USB registered
[    2.807949] usbcore: registered new interface driver usbfs
[    2.807980] usbcore: registered new interface driver hub
[    2.808070] usbcore: registered new device driver usb
[    2.810879] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.810896] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    2.812011] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    2.812020] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.812264] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.812269] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.812272] usb usb1: Product: xHCI Host Controller
[    2.812275] usb usb1: Manufacturer: Linux 4.9.0-8-686-pae xhci-hcd
[    2.812278] usb usb1: SerialNumber: 0000:00:14.0
[    2.812651] hub 1-0:1.0: USB hub found
[    2.812676] hub 1-0:1.0: 6 ports detected
[    2.813968] mmc0: SDHCI controller on ACPI [INT33BB:00] using ADMA
[    2.839145] mmc1: SDHCI controller on ACPI [80860F14:00] using ADMA
[    2.864391] mmc2: SDHCI controller on ACPI [80860F14:02] using ADMA
[    2.948626] mmc0: new high speed SDIO card at address 0001
[    3.027392] [Firmware Bug]: No valid trip found
[    3.138928] mmc2: new high speed SDHC card at address aaaa
[    3.141276] mmcblk2: mmc2:aaaa SL32G 28.8 GiB
[    3.154727] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x133626f6b26, max_idle_ns: 440795214178 ns
[    3.155192] clocksource: Switched to clocksource tsc
[    3.169561] mmc1: new HS200 MMC card at address 0001
[    3.171993] mmcblk1: mmc1:0001 NCard  14.5 GiB
[    3.172779] mmcblk1boot0: mmc1:0001 NCard  partition 1 4.00 MiB
[    3.173755] mmcblk1boot1: mmc1:0001 NCard  partition 2 4.00 MiB
[    3.174700] mmcblk1rpmb: mmc1:0001 NCard  partition 3 4.00 MiB
[    3.179372]  mmcblk2: p1
[    3.181951] random: fast init done
[    3.182209]  mmcblk1: p1 p2 p3
[    3.379827] ------------[ cut here ]------------
[    3.379857] WARNING: CPU: 0 PID: 95 at /build/linux-QmD0TC/linux-4.9.130/drivers/pinctrl/intel/pinctrl-baytrail.c:987 byt_gpio_request_enable+0x92/0xc0
[    3.379862] Modules linked in: mmc_block crc32c_intel aesni_intel xts aes_i586 lrw gf128mul ablk_helper cryptd xhci_pci(+) xhci_hcd usbcore usb_common thermal sdhci_acpi i2c_designware_platform sdhci i2c_designware_core mmc_core
[    3.379952] CPU: 0 PID: 95 Comm: systemd-udevd Tainted: G        W       4.9.0-8-686-pae #1 Debian 4.9.130-2
[    3.379958] Hardware name: LARK Ultimate 7i win/Ultimate 7i win, BIOS LARK.W71JABMR03 04/16/2015
[    3.379965]  f52eb2a4 ce2fd562 00000000 00000000 ce06944a ce6b7c14 00000000 0000005f
[    3.379996]  ce7062e8 000003db ce334902 000003db 00000009 ce334902 f5a9f80c 00000064
[    3.380026]  f5a9f8dc f52eb2b8 ce06955a 00000009 00000000 00000000 f52eb2e4 ce334902
[    3.380055] Call Trace:
[    3.380076]  [<ce2fd562>] ? dump_stack+0x55/0x73
[    3.380092]  [<ce06944a>] ? __warn+0xea/0x110
[    3.380107]  [<ce334902>] ? byt_gpio_request_enable+0x92/0xc0
[    3.380119]  [<ce334902>] ? byt_gpio_request_enable+0x92/0xc0
[    3.380133]  [<ce06955a>] ? warn_slowpath_null+0x2a/0x30
[    3.380146]  [<ce334902>] ? byt_gpio_request_enable+0x92/0xc0
[    3.380160]  [<ce334870>] ? byt_get_gpio_mux.isra.11+0x60/0x60
[    3.380172]  [<ce331445>] ? pin_request+0x155/0x2b0
[    3.380185]  [<ce30d313>] ? kvasprintf+0x43/0x90
[    3.380198]  [<ce334870>] ? byt_get_gpio_mux.isra.11+0x60/0x60
[    3.380210]  [<ce331c1c>] ? pinmux_request_gpio+0x4c/0x80
[    3.380223]  [<ce32ee78>] ? pinctrl_request_gpio+0xf8/0x180
[    3.380236]  [<ce338a34>] ? __gpiod_request+0x64/0xe0
[    3.380247]  [<ce339026>] ? gpiochip_request_own_desc+0x36/0x70
[    3.380261]  [<ce33f650>] ? acpi_gpio_adr_space_handler+0x150/0x300
[    3.380276]  [<ce33f500>] ? acpi_can_fallback_to_crs.part.5+0xd0/0xd0
[    3.380289]  [<ce3a47bb>] ? acpi_ev_address_space_dispatch+0x1d0/0x224
[    3.380302]  [<ce33f500>] ? acpi_can_fallback_to_crs.part.5+0xd0/0xd0
[    3.380316]  [<ce3a7eed>] ? acpi_ex_access_region+0x18d/0x1e7
[    3.380329]  [<ce3a7cfc>] ? acpi_ex_write_data_to_field+0x188/0x1ec
[    3.380343]  [<ce3aba0e>] ? acpi_ex_store_object_to_node+0x127/0x14b
[    3.380356]  [<ce3abae1>] ? acpi_ex_store+0xaf/0x20c
[    3.380369]  [<ce3a9779>] ? acpi_ex_opcode_1A_1T_1R+0x486/0x59b
[    3.380385]  [<ce3a19ca>] ? acpi_ds_exec_end_op+0xbd/0x37d
[    3.380397]  [<ce3b30d3>] ? acpi_ps_parse_loop+0x48b/0x4ed
[    3.380410]  [<ce3b3acf>] ? acpi_ps_parse_aml+0x8a/0x23d
[    3.380423]  [<ce3b4232>] ? acpi_ps_execute_method+0x12d/0x15d
[    3.380434]  [<ce3aeeb5>] ? acpi_ns_evaluate+0x193/0x21a
[    3.380446]  [<ce3b1873>] ? acpi_evaluate_object+0x121/0x205
[    3.380459]  [<ce39bbe4>] ? acpi_power_on_unlocked.part.2+0x24/0x40
[    3.380470]  [<ce39bc47>] ? acpi_power_on+0x47/0x60
[    3.380482]  [<ce39bd26>] ? acpi_power_on_list+0x26/0x60
[    3.380494]  [<ce39c47f>] ? acpi_power_transition+0xcf/0x110
[    3.380508]  [<ce38aa45>] ? acpi_os_signal_semaphore+0x45/0x50
[    3.380521]  [<ce38dec9>] ? acpi_device_set_power+0x249/0x2b0
[    3.380533]  [<ce390970>] ? acpi_initialize_hp_context+0x50/0x50
[    3.380546]  [<ce38df60>] ? acpi_bus_set_power+0x30/0x50
[    3.380584]  [<f86cd88b>] ? usb_acpi_set_power_state+0x4b/0xf0 [usbcore]
[    3.380598]  [<ce391245>] ? acpi_get_device_data.constprop.10+0x25/0x60
[    3.380622]  [<f8703a2b>] ? xhci_hub_control+0xb6b/0x1890 [xhci_hcd]
[    3.380644]  [<f8703a2b>] ? xhci_hub_control+0xb6b/0x1890 [xhci_hcd]
[    3.380666]  [<f8704276>] ? xhci_hub_control+0x13b6/0x1890 [xhci_hcd]
[    3.380680]  [<ce09ceaf>] ? set_next_entity+0x28f/0x740
[    3.380693]  [<ce1c4aa0>] ? __kmalloc+0xc0/0x4f0
[    3.380707]  [<ce5bf0f3>] ? __switch_to_asm+0x33/0x4c
[    3.380717]  [<ce5bf0e7>] ? __switch_to_asm+0x27/0x4c
[    3.380729]  [<ce5b0003>] ? packet_sendmsg+0xac3/0x1280
[    3.380765]  [<f86bb6a7>] ? usb_hcd_submit_urb+0x197/0xad0 [usbcore]
[    3.380789]  [<f8702ec0>] ? xhci_test_and_clear_bit+0x30/0x30 [xhci_hcd]
[    3.380823]  [<f86bb77d>] ? usb_hcd_submit_urb+0x26d/0xad0 [usbcore]
[    3.380835]  [<ce021f36>] ? __switch_to+0x106/0x540
[    3.380852]  [<ce5bb011>] ? _cond_resched+0x31/0x40
[    3.380863]  [<ce5bb7ac>] ? wait_for_completion_timeout+0x2c/0x100
[    3.380899]  [<f86bd993>] ? usb_start_wait_urb+0x53/0x150 [usbcore]
[    3.380912]  [<ce09b693>] ? check_preempt_wakeup+0x183/0x230
[    3.380948]  [<f86bdb54>] ? usb_control_msg+0xc4/0x120 [usbcore]
[    3.380979]  [<f86b0d10>] ? set_port_feature+0x50/0x60 [usbcore]
[    3.381011]  [<f86b44bd>] ? hub_power_on+0x4d/0x100 [usbcore]
[    3.381043]  [<f86b49f3>] ? hub_activate+0x483/0x650 [usbcore]
[    3.381065]  [<f86f75ca>] ? xhci_update_hub_device+0x1a/0x470 [xhci_hcd]
[    3.381079]  [<ce442702>] ? rpm_idle+0x182/0x260
[    3.381114]  [<f86b89f2>] ? hub_probe+0x872/0xdc0 [usbcore]
[    3.381131]  [<ce44398b>] ? __pm_runtime_set_status+0x1bb/0x280
[    3.381144]  [<ce4422c9>] ? pm_runtime_enable+0x19/0x80
[    3.381178]  [<f86c21b4>] ? usb_probe_interface+0x144/0x2d0 [usbcore]
[    3.381190]  [<ce259bc5>] ? sysfs_create_link+0x25/0x50
[    3.381204]  [<ce4386c7>] ? driver_probe_device+0xc7/0x460
[    3.381216]  [<ce438bd7>] ? __device_attach_driver+0x87/0x110
[    3.381229]  [<ce5b7a66>] ? klist_next+0x16/0xf0
[    3.381241]  [<ce438b50>] ? __driver_attach+0xf0/0xf0
[    3.381252]  [<ce4366a2>] ? bus_for_each_drv+0x52/0x90
[    3.381264]  [<ce4384a5>] ? __device_attach+0xc5/0x140
[    3.381275]  [<ce438b50>] ? __driver_attach+0xf0/0xf0
[    3.381288]  [<ce3009c0>] ? kobj_ns_drop+0x50/0x50
[    3.381300]  [<ce4377e7>] ? bus_probe_device+0x77/0x90
[    3.381311]  [<ce435690>] ? device_add+0x390/0x600
[    3.381346]  [<f86bdb6c>] ? usb_control_msg+0xdc/0x120 [usbcore]
[    3.381381]  [<f86c00ae>] ? usb_set_configuration+0x47e/0x8c0 [usbcore]
[    3.381417]  [<f86cacdc>] ? generic_probe+0x2c/0x90 [usbcore]
[    3.381429]  [<ce437da2>] ? driver_sysfs_add+0x62/0x80
[    3.381441]  [<ce4386c7>] ? driver_probe_device+0xc7/0x460
[    3.381453]  [<ce438bd7>] ? __device_attach_driver+0x87/0x110
[    3.381466]  [<ce5b7a66>] ? klist_next+0x16/0xf0
[    3.381477]  [<ce438b50>] ? __driver_attach+0xf0/0xf0
[    3.381488]  [<ce4366a2>] ? bus_for_each_drv+0x52/0x90
[    3.381500]  [<ce4384a5>] ? __device_attach+0xc5/0x140
[    3.381511]  [<ce438b50>] ? __driver_attach+0xf0/0xf0
[    3.381523]  [<ce3009c0>] ? kobj_ns_drop+0x50/0x50
[    3.381536]  [<ce4377e7>] ? bus_probe_device+0x77/0x90
[    3.381546]  [<ce435690>] ? device_add+0x390/0x600
[    3.381580]  [<f86b579d>] ? usb_new_device+0x1dd/0x4a0 [usbcore]
[    3.381612]  [<f86b581b>] ? usb_new_device+0x25b/0x4a0 [usbcore]
[    3.381647]  [<f86bf127>] ? usb_get_device_descriptor+0x67/0x90 [usbcore]
[    3.381680]  [<f86bb0cd>] ? usb_add_hcd+0x51d/0x960 [usbcore]
[    3.381715]  [<f86ccb4a>] ? usb_hcd_pci_probe+0x1fa/0x5b0 [usbcore]
[    3.381731]  [<ce257625>] ? kernfs_add_one+0xf5/0x160
[    3.381750]  [<f872c990>] ? trace_xhci_dbg_quirks+0x60/0x60 [xhci_pci]
[    3.381765]  [<f872c9bd>] ? xhci_pci_probe+0x2d/0x22a [xhci_pci]
[    3.381781]  [<f872c990>] ? trace_xhci_dbg_quirks+0x60/0x60 [xhci_pci]
[    3.381795]  [<ce34dd18>] ? pci_device_probe+0x88/0x100
[    3.381806]  [<ce259bc5>] ? sysfs_create_link+0x25/0x50
[    3.381820]  [<ce4386c7>] ? driver_probe_device+0xc7/0x460
[    3.381833]  [<ce34d9de>] ? pci_match_device+0xde/0x100
[    3.381845]  [<ce438b49>] ? __driver_attach+0xe9/0xf0
[    3.381856]  [<ce436d00>] ? unbind_store+0x110/0x110
[    3.381869]  [<ce5b7a66>] ? klist_next+0x16/0xf0
[    3.381881]  [<ce438a60>] ? driver_probe_device+0x460/0x460
[    3.381892]  [<ce4365ea>] ? bus_for_each_dev+0x5a/0xa0
[    3.381904]  [<ce437fee>] ? driver_attach+0x1e/0x20
[    3.381915]  [<ce438a60>] ? driver_probe_device+0x460/0x460
[    3.381926]  [<ce437abf>] ? bus_add_driver+0x17f/0x270
[    3.381940]  [<ce43945d>] ? driver_register+0x5d/0xf0
[    3.381950]  [<f8731000>] ? 0xf8731000
[    3.381962]  [<ce002195>] ? do_one_initcall+0x45/0x180
[    3.381974]  [<ce4f240b>] ? netlink_broadcast_filtered+0x11b/0x380
[    3.381988]  [<ce16b714>] ? do_init_module+0x21/0x1c7
[    3.381999]  [<ce16b743>] ? do_init_module+0x50/0x1c7
[    3.382011]  [<ce0f6e3a>] ? load_module+0x209a/0x26e0
[    3.382030]  [<ce0f76a0>] ? SyS_finit_module+0xb0/0x100
[    3.382046]  [<ce003728>] ? do_fast_syscall_32+0x98/0x160
[    3.382059]  [<ce5bf1c2>] ? sysenter_past_esp+0x47/0x75
[    3.382069] ---[ end trace 1e2512a4c0e4f63b ]---
[    3.382085] byt_gpio INT33FC:00: pin 100 forcibly re-configured as GPIO
[    3.383326] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.383356] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    3.383770] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    3.383784] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.383795] usb usb2: Product: xHCI Host Controller
[    3.383805] usb usb2: Manufacturer: Linux 4.9.0-8-686-pae xhci-hcd
[    3.383815] usb usb2: SerialNumber: 0000:00:14.0
[    3.385121] hub 2-0:1.0: USB hub found
[    3.385187] hub 2-0:1.0: 1 port detected
[    3.502004] PM: Starting manual resume from disk
[    3.502021] PM: Hibernation image partition 179:258 present
[    3.502027] PM: Looking for hibernation image.
[    3.503120] PM: Image not found (code -22)
[    3.503124] PM: Hibernation image not present or could not be loaded.
[    3.707419] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    3.762693] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
[    3.849543] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    3.849555] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.849563] usb 1-1: Product: USB2.0 Hub
[    3.850731] hub 1-1:1.0: USB hub found
[    3.851125] hub 1-1:1.0: 4 ports detected
[    4.098367] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.139305] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd
[    4.154727] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    4.155507] systemd[1]: Detected architecture x86.
[    4.156076] systemd[1]: Set hostname to <debian>.
[    4.382919] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.383705] systemd[1]: Created slice System Slice.
[    4.385766] systemd[1]: Mounting Huge Pages File System...
[    4.387957] systemd[1]: Mounting Debug File System...
[    4.388387] systemd[1]: Listening on Journal Audit Socket.
[    4.388504] systemd[1]: Reached target User and Group Name Lookups.
[    4.388728] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.451465] EXT4-fs (mmcblk1p3): re-mounted. Opts: errors=remount-ro
[    4.496543] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=0119
[    4.496550] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.496553] usb 1-1.1: Product: USB2.0-CRW
[    4.496557] usb 1-1.1: Manufacturer: Generic
[    4.496560] usb 1-1.1: SerialNumber: 20090815198100000
[    4.540637] systemd-journald[211]: Received request to flush runtime journal from PID 1
[    4.579103] usb 1-1.2: new full-speed USB device number 4 using xhci_hcd
[    4.680344] usb 1-1.2: New USB device found, idVendor=04b3, idProduct=301a
[    4.680350] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.680354] usb 1-1.2: Product: USB 1.1 2port downstream low power hub
[    4.680357] usb 1-1.2: Manufacturer: Lite-On Technology
[    4.681639] hub 1-1.2:1.0: USB hub found
[    4.681818] hub 1-1.2:1.0: 3 ports detected
[    4.717041] SCSI subsystem initialized
[    4.727399] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[    4.734802] scsi host0: usb-storage 1-1.1:1.0
[    4.735045] usbcore: registered new interface driver usb-storage
[    4.738042] usbcore: registered new interface driver uas
[    4.749749] ACPI: AC Adapter [ADP1] (off-line)
[    4.776699] ACPI: Battery Slot [BMBT] (battery present)
[    4.803412] ------------[ cut here ]------------
[    4.803424] WARNING: CPU: 2 PID: 260 at /build/linux-QmD0TC/linux-4.9.130/drivers/pinctrl/intel/pinctrl-baytrail.c:987 byt_gpio_request_enable+0x92/0xc0
[    4.803426] Modules linked in: bmc150_accel_i2c(+) soc_button_array(+) processor_thermal_device snd_pcm(+) bmc150_accel_core int3403_thermal acpi_thermal_rel intel_soc_dts_iosf int340x_thermal_zone industrialio_triggered_buffer kfifo_buf snd_timer battery dptf_power industrialio snd soundcore acpi_pad ac uas usb_storage scsi_mod rtlwifi mac80211 cfg80211 rfkill efivarfs ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb mbcache mmc_block crc32c_intel aesni_intel xts aes_i586 lrw gf128mul ablk_helper cryptd xhci_pci xhci_hcd usbcore usb_common thermal sdhci_acpi i2c_designware_platform sdhci i2c_designware_core mmc_core
[    4.803500] CPU: 2 PID: 260 Comm: systemd-udevd Tainted: G        W       4.9.0-8-686-pae #1 Debian 4.9.130-2
[    4.803502] Hardware name: LARK Ultimate 7i win/Ultimate 7i win, BIOS LARK.W71JABMR03 04/16/2015
[    4.803505]  f6917b3c ce2fd562 00000000 00000000 ce06944a ce6b7c14 00000002 00000104
[    4.803516]  ce7062e8 000003db ce334902 000003db 00000009 ce334902 f5bc670c 00000015
[    4.803525]  f5bc67dc f6917b50 ce06955a 00000009 00000000 00000000 f6917b7c ce334902
[    4.803534] Call Trace:
[    4.803544]  [<ce2fd562>] ? dump_stack+0x55/0x73
[    4.803551]  [<ce06944a>] ? __warn+0xea/0x110
[    4.803555]  [<ce334902>] ? byt_gpio_request_enable+0x92/0xc0
[    4.803559]  [<ce334902>] ? byt_gpio_request_enable+0x92/0xc0
[    4.803564]  [<ce06955a>] ? warn_slowpath_null+0x2a/0x30
[    4.803568]  [<ce334902>] ? byt_gpio_request_enable+0x92/0xc0
[    4.803572]  [<ce334870>] ? byt_get_gpio_mux.isra.11+0x60/0x60
[    4.803576]  [<ce331445>] ? pin_request+0x155/0x2b0
[    4.803581]  [<ce30d313>] ? kvasprintf+0x43/0x90
[    4.803586]  [<ce33f1ac>] ? acpi_get_gpiod_by_index+0x9c/0x160
[    4.803589]  [<ce334870>] ? byt_get_gpio_mux.isra.11+0x60/0x60
[    4.803593]  [<ce331c1c>] ? pinmux_request_gpio+0x4c/0x80
[    4.803598]  [<ce32ee78>] ? pinctrl_request_gpio+0xf8/0x180
[    4.803602]  [<ce33fc26>] ? acpi_find_gpio+0x176/0x1d0
[    4.803606]  [<ce338a34>] ? __gpiod_request+0x64/0xe0
[    4.803610]  [<ce33c44a>] ? gpiod_request+0xfa/0x170
[    4.803615]  [<ce33d0fe>] ? gpiod_get_index+0x18e/0x320
[    4.803620]  [<ce43c14f>] ? devres_add+0x2f/0x40
[    4.803628]  [<f8f9c0ff>] ? soc_button_probe+0xcf/0x257 [soc_button_array]
[    4.803632]  [<ce43a955>] ? platform_drv_probe+0x35/0x90
[    4.803636]  [<ce437da2>] ? driver_sysfs_add+0x62/0x80
[    4.803640]  [<ce4386c7>] ? driver_probe_device+0xc7/0x460
[    4.803646]  [<ce38ff82>] ? acpi_driver_match_device+0x22/0x70
[    4.803650]  [<ce438b49>] ? __driver_attach+0xe9/0xf0
[    4.803654]  [<ce436d00>] ? unbind_store+0x110/0x110
[    4.803658]  [<ce5b7a66>] ? klist_next+0x16/0xf0
[    4.803662]  [<ce5b7ac0>] ? klist_next+0x70/0xf0
[    4.803666]  [<ce438a60>] ? driver_probe_device+0x460/0x460
[    4.803669]  [<ce4365ea>] ? bus_for_each_dev+0x5a/0xa0
[    4.803673]  [<ce437fee>] ? driver_attach+0x1e/0x20
[    4.803677]  [<ce438a60>] ? driver_probe_device+0x460/0x460
[    4.803680]  [<ce437abf>] ? bus_add_driver+0x17f/0x270
[    4.803684]  [<f8fa1000>] ? 0xf8fa1000
[    4.803688]  [<ce43945d>] ? driver_register+0x5d/0xf0
[    4.803691]  [<f8fa1000>] ? 0xf8fa1000
[    4.803695]  [<ce002195>] ? do_one_initcall+0x45/0x180
[    4.803701]  [<ce16b714>] ? do_init_module+0x21/0x1c7
[    4.803704]  [<ce16b743>] ? do_init_module+0x50/0x1c7
[    4.803709]  [<ce0f6e3a>] ? load_module+0x209a/0x26e0
[    4.803715]  [<ce0f76a0>] ? SyS_finit_module+0xb0/0x100
[    4.803719]  [<ce00314f>] ? syscall_trace_enter+0x16f/0x260
[    4.803724]  [<ce003728>] ? do_fast_syscall_32+0x98/0x160
[    4.803728]  [<ce5bf1c2>] ? sysenter_past_esp+0x47/0x75
[    4.803732] ---[ end trace 1e2512a4c0e4f63c ]---
[    4.803739] byt_gpio INT33FC:02: pin 21 forcibly re-configured as GPIO
[    4.859598] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[    4.881506] [drm] Initialized
[    4.901479] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[    4.948349] EFI Variables Facility v0.08 2004-May-17
[    4.955732] [drm] Memory usable by graphics device = 2048M
[    4.955741] checking generic (40000000 260000) vs hw (40000000 8000000)
[    4.955744] fb: switching to inteldrmfb from EFI VGA
[    4.955838] Console: switching to colour dummy device 80x25
[    4.962992] [drm] Replacing VGA console driver
[    4.963570] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.963572] [drm] Driver supports precise vblank timestamp query.
[    4.964386] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.964889] [drm:pwm_setup_backlight [i915]] *ERROR* Failed to own the pwm chip
[    4.967106] usb 1-1.2.1: new full-speed USB device number 5 using xhci_hcd
[    4.969073] pstore: using zlib compression
[    4.969099] pstore: Registered efi as persistent store backend
[    4.979341] intel_sst_acpi 80860F28:00: Detected Baytrail-CR platform
[    4.979553] intel_sst_acpi 80860F28:00: LPE base: 0x48a00000 size:0x200000
[    4.979557] intel_sst_acpi 80860F28:00: IRAM base: 0x48ac0000
[    4.979584] intel_sst_acpi 80860F28:00: DRAM base: 0x48b00000
[    4.979595] intel_sst_acpi 80860F28:00: SHIM base: 0x48b40000
[    4.979607] intel_sst_acpi 80860F28:00: Mailbox base: 0x48b44000
[    4.979617] intel_sst_acpi 80860F28:00: DDR base: 0x20000000
[    4.985646] intel_sst_acpi 80860F28:00: Got drv data max stream 25
[    4.991754] input: PC Speaker as /devices/platform/pcspkr/input/input0
[    5.005240] intel_sst_acpi 80860F28:00: firmware: direct-loading firmware intel/fw_sst_0f28.bin
[    5.035837] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.037284] acpi device:21: registered as cooling_device7
[    5.037463] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1
[    5.038921] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    5.042808] Adding 2999292k swap on /dev/mmcblk1p2.  Priority:-1 extents:1 across:2999292k SSFS
[    5.068548] usb 1-1.2.1: New USB device found, idVendor=04b3, idProduct=301b
[    5.068555] usb 1-1.2.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[    5.068558] usb 1-1.2.1: Product: USB Productivity Option Keyboard( has the hub in # 1 )
[    5.068562] usb 1-1.2.1: Manufacturer: Lite-On Technology
[    5.071876] intel_rapl: Found RAPL domain package
[    5.071882] intel_rapl: Found RAPL domain core
[    5.123913] input: gpio-keys as /devices/platform/gpio-keys.0.auto/input/input2
[    5.124128] input: gpio-keys as /devices/platform/gpio-keys.1.auto/input/input3
[    5.129469] iTCO_vendor_support: vendor-support=0
[    5.142362] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.142469] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[    5.147332] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.158794] bytcr_rt5640 bytcr_rt5640: quirk IN1_MAP enabled
[    5.158800] bytcr_rt5640 bytcr_rt5640: quirk DIFF_MIC enabled
[    5.158803] bytcr_rt5640 bytcr_rt5640: quirk SSP0_AIF2 enabled
[    5.158806] bytcr_rt5640 bytcr_rt5640: quirk MCLK_EN enabled
[    5.158813] bytcr_rt5640 bytcr_rt5640: Failed to get MCLK from pmc_plt_clk_3: -2
[    5.158839] bytcr_rt5640: probe of bytcr_rt5640 failed with error -2
[    5.189221] hidraw: raw HID events driver (C) Jiri Kosina
[    5.198653] usbcore: registered new interface driver usbhid
[    5.198663] usbhid: USB HID core driver
[    5.205293] input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:04B3:301B.0001/input/input4
[    5.263876] hid-generic 0003:04B3:301B.0001: input,hidraw0: USB HID v1.10 Keyboard [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )] on usb-0000:00:14.0-1.2.1/input0
[    5.264394] input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/0003:04B3:301B.0002/input/input5
[    5.323743] hid-generic 0003:04B3:301B.0002: input,hidraw1: USB HID v1.10 Device [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )] on usb-0000:00:14.0-1.2.1/input1
[    5.432227] fbcon: inteldrmfb (fb0) is primary device
[    5.752098] scsi 0:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[    5.764187] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    6.566322] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB)
[    6.566761] sd 0:0:0:0: [sda] Write Protect is off
[    6.566777] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[    6.567265] sd 0:0:0:0: [sda] No Caching mode page found
[    6.567276] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    6.574594]  sda: sda1 sda2
[    6.576911] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    6.938764] Console: switching to colour frame buffer device 128x37
[    6.972767] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   14.964282] random: crng init done
[   14.964294] random: 7 urandom warning(s) missed due to ratelimiting
[   29.235201] ISO 9660 Extensions: Microsoft Joliet Level 3
[   29.254804] ISO 9660 Extensions: Microsoft Joliet Level 3
[   29.267411] ISO 9660 Extensions: RRIP_1991A
[   29.286985] fuse init (API version 7.26)
[   41.511666] usb 1-1.4: new low-speed USB device number 6 using xhci_hcd
[   41.617907] usb 1-1.4: New USB device found, idVendor=1bcf, idProduct=0005
[   41.617925] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[   41.617936] usb 1-1.4: Product: USB Optical Mouse
[   41.627651] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1BCF:0005.0003/input/input6
[   41.629874] hid-generic 0003:1BCF:0005.0003: input,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-1.4/input0
[   54.827697] usb 1-1.3: new high-speed USB device number 7 using xhci_hcd
[   54.937529] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0119
[   54.937547] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   54.937558] usb 1-1.3: Product: USB2.0-CRW
[   54.937568] usb 1-1.3: Manufacturer: Generic
[   54.937578] usb 1-1.3: SerialNumber: 20090815198100000
[   54.941692] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[   54.942281] scsi host1: usb-storage 1-1.3:1.0
[   55.959746] scsi 1:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[   55.963898] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   56.626858] sd 1:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.97 GB/3.69 GiB)
[   56.629342] sd 1:0:0:0: [sdb] Write Protect is off
[   56.629362] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
[   56.629930] sd 1:0:0:0: [sdb] No Caching mode page found
[   56.629955] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[   56.641007]  sdb: sdb1
[   56.644949] sd 1:0:0:0: [sdb] Attached SCSI removable disk

4

Odp: debian 9 Lark 7i win z3735g "I2C/SD/UART"

lsusb/lspci:

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 1bcf:0005 Sunplus Innovation Technology Inc. Optical Mouse
Bus 001 Device 007: ID 0bda:0119 Realtek Semiconductor Corp. Storage Device (SD card reader)
Bus 001 Device 005: ID 04b3:301b IBM Corp. SK-8815 Keyboard
Bus 001 Device 004: ID 04b3:301a IBM Corp. 2-port low-power hub
Bus 001 Device 003: ID 0bda:0119 Realtek Semiconductor Corp. Storage Device (SD card reader)
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


00:00.0 Host bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register (rev 0f)
00:02.0 VGA compatible controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display (rev 0f)
00:14.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI (rev 0f)
00:1a.0 Encryption controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine (rev 0f)
00:1f.0 ISA bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit (rev 0f)

5 (edytowany przez amateusz 2019-05-24 17:14:16)

Odp: debian 9 Lark 7i win z3735g "I2C/SD/UART"

cześć,
da się! trochę się bawiłem moim larkiem i tak:

poniższe urządzenia wymagały backport'u jądra 4.19 (z ówczesnego 4.9), ale obecnie (pół roku później), to już domyślny kernel (4.19.0-5-amd64 #1 SMP Debian 4.19.37-3), więc cała poniższa procedura śmiga. No więc tak:

nie działa mi:

  • podświetlenie. działało, ale przestało

  • wykrywanie baterii (PMIC), mimo że moduł jądra axp20x_i2c jest załadowany

  • akcelerometr. nie wiedziałem, że jest

  • kamerki

wrzucam jeszcze swojego dmesg'a:

[    0.000000] Linux version 4.19.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-7)) #1 SMP Debian 4.19.37-3 (2019-05-15)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=5083e547-0bda-47a6-8678-89eeef3b7847 ro quiet
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000037a76fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000037a77000-0x0000000037a7ffff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000037a80000-0x0000000037afffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000037b00000-0x000000003bb27fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003bb28000-0x000000003bb87fff] type 20
[    0.000000] BIOS-e820: [mem 0x000000003bb88000-0x000000003bda7fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003bda8000-0x000000003bda8fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003bda9000-0x000000003bda9fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003bdaa000-0x000000003bdabfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003bdac000-0x000000003bdacfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003bdad000-0x000000003c7fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003cc00000-0x000000003cc3afff] usable
[    0.000000] BIOS-e820: [mem 0x000000003cc3b000-0x000000003cc46fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003cc47000-0x000000003ccb6fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003ccb7000-0x000000003ccf6fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003ccf7000-0x000000003ccfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  ACPI 2.0=0x3ccf6014  ESRT=0x3bc98010  SMBIOS=0x3bd5f000 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LARK Ultimate 7i win/Ultimate 7i win, BIOS LARK.W71JJBM02 01/28/2015
[    0.000000] tsc: Detected 1332.800 MHz processor
[    0.000029] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000038] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000063] last_pfn = 0x3cd00 max_arch_pfn = 0x400000000
[    0.000071] MTRR default type: uncachable
[    0.000074] MTRR fixed ranges enabled:
[    0.000078]   00000-9FFFF write-back
[    0.000082]   A0000-FFFFF write-protect
[    0.000084] MTRR variable ranges enabled:
[    0.000089]   0 base 0FFD00000 mask FFFC00000 write-protect
[    0.000092]   1 base 000000000 mask FC0000000 write-back
[    0.000096]   2 base 03E000000 mask FFE000000 uncachable
[    0.000100]   3 base 03D000000 mask FFF000000 uncachable
[    0.000103]   4 base 03CE00000 mask FFFE00000 uncachable
[    0.000107]   5 base 03CD00000 mask FFFF00000 uncachable
[    0.000109]   6 disabled
[    0.000112]   7 disabled
[    0.000474] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.009863] esrt: Reserving ESRT space from 0x000000003bc98010 to 0x000000003bc98048.
[    0.009880] Base memory trampoline at [(____ptrval____)] 98000 size 24576
[    0.009891] BRK [0x2a601000, 0x2a601fff] PGTABLE
[    0.009896] BRK [0x2a602000, 0x2a602fff] PGTABLE
[    0.009900] BRK [0x2a603000, 0x2a603fff] PGTABLE
[    0.010120] BRK [0x2a604000, 0x2a604fff] PGTABLE
[    0.011353] BRK [0x2a605000, 0x2a605fff] PGTABLE
[    0.011609] BRK [0x2a606000, 0x2a606fff] PGTABLE
[    0.012229] BRK [0x2a607000, 0x2a607fff] PGTABLE
[    0.012821] RAMDISK: [mem 0x33bbf000-0x35dd6fff]
[    0.012830] ACPI: Early table checksum verification disabled
[    0.012837] ACPI: RSDP 0x000000003CCF6014 000024 (v02 INSYDE)
[    0.012848] ACPI: XSDT 0x000000003CCCE188 0000E4 (v01 INSYDE INSYDE   00000003      01000013)
[    0.012865] ACPI: FACP 0x000000003CCEF000 00010C (v05 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012880] ACPI: DSDT 0x000000003CCDA000 00F0CD (v02 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012892] ACPI: UEFI 0x000000003CCF5000 000236 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.012904] ACPI: TCPA 0x000000003CCF4000 000032 (v02 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.012915] ACPI: MSDM 0x000000003CCF3000 000055 (v03 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.012927] ACPI: UEFI 0x000000003CCF2000 000042 (v01 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.012938] ACPI: OEM0 0x000000003CCF1000 000084 (v05 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012949] ACPI: DBG2 0x000000003CCF0000 000072 (v00 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012961] ACPI: HPET 0x000000003CCEE000 000038 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012972] ACPI: LPIT 0x000000003CCED000 000104 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012983] ACPI: APIC 0x000000003CCEC000 00006C (v03 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.012994] ACPI: MCFG 0x000000003CCEB000 00003C (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.013006] ACPI: SLIC 0x000000003CCEA000 000176 (v01 INSYDE INSYDE   00000003 ACPI 00040000)
[    0.013017] ACPI: SSDT 0x000000003CCD9000 000603 (v01 INSYDE CpuDptf  00000003 ACPI 00040000)
[    0.013028] ACPI: SSDT 0x000000003CCD6000 00249C (v01 INSYDE DptfTab  00000003 ACPI 00040000)
[    0.013040] ACPI: SSDT 0x000000003CCD5000 000058 (v01 INSYDE LowPwrM  00000003 ACPI 00040000)
[    0.013051] ACPI: SSDT 0x000000003CCD4000 0000FF (v01 INSYDE SoCDptf  00000003 ACPI 00040000)
[    0.013062] ACPI: SSDT 0x000000003CCD3000 00043A (v01 INSYDE Tpm2Tabl 00001000 ACPI 00040000)
[    0.013074] ACPI: TPM2 0x000000003CCD2000 000034 (v03 INSYDE INSYDE   00000000 ACPI 00040000)
[    0.013085] ACPI: SSDT 0x000000003CCD1000 000763 (v01 INSYDE CpuPm    00003000 ACPI 00040000)
[    0.013096] ACPI: SSDT 0x000000003CCD0000 000290 (v01 INSYDE Cpu0Tst  00003000 ACPI 00040000)
[    0.013108] ACPI: SSDT 0x000000003CCCF000 00017A (v01 INSYDE ApTst    00003000 ACPI 00040000)
[    0.013119] ACPI: FPDT 0x000000003CCCD000 000044 (v01 INSYDE INSYDE   00000002 ACPI 00040000)
[    0.013130] ACPI: CSRT 0x000000003CCCC000 00014C (v00 INSYDE INSYDE   00000005 ACPI 00040000)
[    0.013142] ACPI: BGRT 0x000000003CCCB000 000038 (v01 INSYDE INSYDE   00000001 ACPI 00040000)
[    0.013162] ACPI: Local APIC address 0xfee00000
[    0.013428] No NUMA configuration found
[    0.013431] Faking a node at [mem 0x0000000000000000-0x000000003ccfffff]
[    0.013443] NODE_DATA(0) allocated [mem 0x3cc36000-0x3cc3afff]
[    0.013516] Zone ranges:
[    0.013519]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.013524]   DMA32    [mem 0x0000000001000000-0x000000003ccfffff]
[    0.013528]   Normal   empty
[    0.013532]   Device   empty
[    0.013535] Movable zone start for each node
[    0.013537] Early memory node ranges
[    0.013540]   node   0: [mem 0x0000000000001000-0x000000000008efff]
[    0.013543]   node   0: [mem 0x0000000000090000-0x000000000009dfff]
[    0.013545]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.013548]   node   0: [mem 0x0000000020200000-0x0000000037a76fff]
[    0.013551]   node   0: [mem 0x0000000037b00000-0x000000003bb27fff]
[    0.013553]   node   0: [mem 0x000000003bda8000-0x000000003bda8fff]
[    0.013556]   node   0: [mem 0x000000003bdaa000-0x000000003bdabfff]
[    0.013558]   node   0: [mem 0x000000003bdad000-0x000000003c7fffff]
[    0.013561]   node   0: [mem 0x000000003cc00000-0x000000003cc3afff]
[    0.013564]   node   0: [mem 0x000000003ccf7000-0x000000003ccfffff]
[    0.013574] Reserved but unavailable: 98 pages
[    0.013579] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ccfffff]
[    0.013584] On node 0 totalpages: 246485
[    0.013587]   DMA zone: 64 pages used for memmap
[    0.013589]   DMA zone: 22 pages reserved
[    0.013592]   DMA zone: 3996 pages, LIFO batch:0
[    0.013914]   DMA32 zone: 3828 pages used for memmap
[    0.013916]   DMA32 zone: 242489 pages, LIFO batch:63
[    0.032766] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.032778] Reserving Intel graphics memory at [mem 0x3cf00000-0x3eefffff]
[    0.032848] ACPI: Local APIC address 0xfee00000
[    0.032879] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[    0.032886] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.032890] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.032896] Using ACPI (MADT) for SMP configuration information
[    0.032900] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.032928] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.033015] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.033022] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.033028] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.033030] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.033037] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.033043] PM: Registered nosave memory: [mem 0x37a77000-0x37a7ffff]
[    0.033046] PM: Registered nosave memory: [mem 0x37a80000-0x37afffff]
[    0.033052] PM: Registered nosave memory: [mem 0x3bb28000-0x3bb87fff]
[    0.033055] PM: Registered nosave memory: [mem 0x3bb88000-0x3bda7fff]
[    0.033061] PM: Registered nosave memory: [mem 0x3bda9000-0x3bda9fff]
[    0.033068] PM: Registered nosave memory: [mem 0x3bdac000-0x3bdacfff]
[    0.033075] PM: Registered nosave memory: [mem 0x3c800000-0x3cbfffff]
[    0.033081] PM: Registered nosave memory: [mem 0x3cc3b000-0x3cc46fff]
[    0.033084] PM: Registered nosave memory: [mem 0x3cc47000-0x3ccb6fff]
[    0.033086] PM: Registered nosave memory: [mem 0x3ccb7000-0x3ccf6fff]
[    0.033091] [mem 0x3ef00000-0xe00f7fff] available for PCI devices
[    0.033094] Booting paravirtualized kernel on bare hardware
[    0.033102] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.363265] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0
[    0.363293] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.364484] percpu: Embedded 44 pages/cpu s143256 r8192 d28776 u524288
[    0.364511] pcpu-alloc: s143256 r8192 d28776 u524288 alloc=1*2097152
[    0.364516] pcpu-alloc: [0] 0 1 2 3 
[    0.364597] Built 1 zonelists, mobility grouping on.  Total pages: 242571
[    0.364600] Policy zone: DMA32
[    0.364605] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=5083e547-0bda-47a6-8678-89eeef3b7847 ro quiet
[    0.364807] Calgary: detecting Calgary via BIOS EBDA area
[    0.364810] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.375749] Memory: 882612K/985940K available (10252K kernel code, 1242K rwdata, 3180K rodata, 1580K init, 2296K bss, 103328K reserved, 0K cma-reserved)
[    0.376135] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.376154] Kernel/User page tables isolation: enabled
[    0.376308] ftrace: allocating 31824 entries in 125 pages
[    0.406880] rcu: Hierarchical RCU implementation.
[    0.406885] rcu:     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.406889] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.419421] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 0
[    0.419555] Console: colour dummy device 80x25
[    0.419565] console [tty0] enabled
[    0.419629] ACPI: Core revision 20180810
[    0.420116] APIC: Switch to symmetric I/O mode setup
[    0.420170] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x133626f6b26, max_idle_ns: 440795214178 ns
[    0.420199] Calibrating delay loop (skipped), value calculated using timer frequency.. 2665.60 BogoMIPS (lpj=5331200)
[    0.420207] pid_max: default: 32768 minimum: 301
[    0.421630] Security Framework initialized
[    0.421636] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.421688] AppArmor: AppArmor initialized
[    0.422163] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.422471] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.422523] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.422538] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.423135] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.423138] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.423154] mce: CPU supports 6 MCE banks
[    0.423167] CPU0: Thermal monitoring enabled (TM1)
[    0.423172] process: using mwait in idle threads
[    0.423180] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.423183] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.423188] Spectre V2 : Mitigation: Full generic retpoline
[    0.423189] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.423252] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.423639] Freeing SMP alternatives memory: 24K
[    0.424176] TSC deadline timer enabled
[    0.424176] smpboot: CPU0: Intel(R) Atom(TM) CPU  Z3735G @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x8)
[    0.424176] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.424176] ... version:                3
[    0.424176] ... bit width:              40
[    0.424176] ... generic registers:      2
[    0.424176] ... value mask:             000000ffffffffff
[    0.424176] ... max period:             0000007fffffffff
[    0.424176] ... fixed-purpose events:   3
[    0.424176] ... event mask:             0000000700000003
[    0.424176] rcu: Hierarchical SRCU implementation.
[    0.424176] random: crng done (trusting CPU's manufacturer)
[    0.424176] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.424176] smp: Bringing up secondary CPUs ...
[    0.424176] x86: Booting SMP configuration:
[    0.424176] .... node  #0, CPUs:      #1 #2 #3
[    0.424470] smp: Brought up 1 node, 4 CPUs
[    0.424470] smpboot: Max logical packages: 1
[    0.424470] smpboot: Total of 4 processors activated (10662.40 BogoMIPS)
[    0.425215] devtmpfs: initialized
[    0.425215] x86/mm: Memory block size: 128MB
[    0.425215] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    0.425215] PM: Registering ACPI NVS region [mem 0x3cc47000-0x3ccb6fff] (458752 bytes)
[    0.425215] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.425215] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.425215] pinctrl core: initialized pinctrl subsystem
[    0.425215] NET: Registered protocol family 16
[    0.425215] audit: initializing netlink subsys (disabled)
[    0.425238] audit: type=2000 audit(1558699982.004:1): state=initialized audit_enabled=0 res=1
[    0.425238] cpuidle: using governor ladder
[    0.425238] cpuidle: using governor menu
[    0.428247] ACPI: bus type PCI registered
[    0.428251] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.428439] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.428473] PCI: not using MMCONFIG
[    0.428477] PCI: Using configuration type 1 for base access
[    0.430702] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.432309] ACPI: Added _OSI(Module Device)
[    0.432312] ACPI: Added _OSI(Processor Device)
[    0.432314] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.432316] ACPI: Added _OSI(Processor Aggregator Device)
[    0.432319] ACPI: Added _OSI(Linux-Dell-Video)
[    0.432322] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.462189] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.475782] ACPI: Dynamic OEM Table Load:
[    0.475804] ACPI: SSDT 0xFFFF9032FC1BB000 000501 (v01 PmRef  Cpu0Ist  00003000 INTL 20130117)
[    0.476914] ACPI: Dynamic OEM Table Load:
[    0.476933] ACPI: SSDT 0xFFFF9032FC1BA800 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.478388] ACPI: Dynamic OEM Table Load:
[    0.478406] ACPI: SSDT 0xFFFF9032FC218200 00015F (v01 PmRef  ApIst    00003000 INTL 20130117)
[    0.479093] ACPI: Dynamic OEM Table Load:
[    0.479109] ACPI: SSDT 0xFFFF9032FC1F5240 00008D (v01 PmRef  ApCst    00003000 INTL 20130117)
[    0.483365] ACPI: Interpreter enabled
[    0.483408] ACPI: (supports S0 S5)
[    0.483412] ACPI: Using IOAPIC for interrupt routing
[    0.483511] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.491008] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] not reserved in ACPI motherboard resources
[    0.491013] PCI: not using MMCONFIG
[    0.491021] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.495699] ACPI: Power Resource [USBC] (on)
[    0.496546] ACPI: Power Resource [WWPR] (off)
[    0.504496] ACPI: Power Resource [PLPE] (on)
[    0.514308] ACPI: Power Resource [CLK0] (on)
[    0.514589] ACPI: Power Resource [P28P] (off)
[    0.514706] ACPI: Power Resource [P18P] (off)
[    0.517259] ACPI: Power Resource [CLK0] (on)
[    0.517390] ACPI: Power Resource [CLK1] (on)
[    0.524185] ACPI: Power Resource [P28X] (off)
[    0.524315] ACPI: Power Resource [P18X] (off)
[    0.524449] ACPI: Power Resource [P28T] (off)
[    0.524581] ACPI: Power Resource [P18T] (off)
[    0.524712] ACPI: Power Resource [P1XT] (off)
[    0.532468] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.532481] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.532613] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.532644] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.533364] PCI host bridge to bus 0000:00
[    0.533370] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.533375] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.533379] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.533383] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.533387] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.533391] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.533395] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.533399] pci_bus 0000:00: root bus resource [mem 0x48c00000-0x48ffffff window]
[    0.533403] pci_bus 0000:00: root bus resource [mem 0x3cf00001-0x3ef00000 window]
[    0.533406] pci_bus 0000:00: root bus resource [mem 0x40000000-0x488ffffe window]
[    0.533410] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff window]
[    0.533415] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.533431] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    0.533648] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    0.533669] pci 0000:00:02.0: reg 0x10: [mem 0x48000000-0x483fffff]
[    0.533684] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x47ffffff pref]
[    0.533697] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x1007]
[    0.533723] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.533915] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[    0.533942] pci 0000:00:14.0: reg 0x10: [mem 0x48800000-0x4880ffff 64bit]
[    0.534017] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.534200] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    0.534229] pci 0000:00:1a.0: reg 0x10: [mem 0x48700000-0x487fffff]
[    0.534242] pci 0000:00:1a.0: reg 0x14: [mem 0x48600000-0x486fffff]
[    0.534337] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.534511] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    0.535692] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.535897] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.536104] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.536324] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.536528] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.536732] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.536936] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.537140] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.553899] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.553899] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.553899] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.553899] vgaarb: loaded
[    0.689252] pps_core: LinuxPPS API ver. 1 registered
[    0.689256] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.689273] PTP clock support registered
[    0.689293] EDAC MC: Ver: 3.0.0
[    0.689413] Registered efivars operations
[    0.709876] PCI: Using ACPI for IRQ routing
[    0.709876] PCI: pci_cache_line_size set to 64 bytes
[    0.709876] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.709876] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.709876] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.709876] e820: reserve RAM buffer [mem 0x37a77000-0x37ffffff]
[    0.709876] e820: reserve RAM buffer [mem 0x3bb28000-0x3bffffff]
[    0.709876] e820: reserve RAM buffer [mem 0x3bda9000-0x3bffffff]
[    0.709876] e820: reserve RAM buffer [mem 0x3bdac000-0x3bffffff]
[    0.709876] e820: reserve RAM buffer [mem 0x3c800000-0x3fffffff]
[    0.709876] e820: reserve RAM buffer [mem 0x3cc3b000-0x3fffffff]
[    0.709876] e820: reserve RAM buffer [mem 0x3cd00000-0x3fffffff]
[    0.709876] clocksource: Switched to clocksource tsc-early
[    0.740061] VFS: Disk quotas dquot_6.6.0
[    0.740107] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.740431] AppArmor: AppArmor Filesystem Enabled
[    0.740484] pnp: PnP ACPI init
[    0.740644] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.740828] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.740833] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.740838] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.740842] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.740847] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.740861] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.741165] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.745670] pnp: PnP ACPI: found 3 devices
[    0.751011] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.751017] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.751021] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.751025] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.751030] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.751034] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.751038] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.751042] pci_bus 0000:00: resource 11 [mem 0x48c00000-0x48ffffff window]
[    0.751046] pci_bus 0000:00: resource 12 [mem 0x3cf00001-0x3ef00000 window]
[    0.751050] pci_bus 0000:00: resource 13 [mem 0x40000000-0x488ffffe window]
[    0.751054] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed40fff window]
[    0.751242] NET: Registered protocol family 2
[    0.751714] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes)
[    0.751735] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.751794] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    0.751853] TCP: Hash tables configured (established 8192 bind 8192)
[    0.751948] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.751967] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.752082] NET: Registered protocol family 1
[    0.752096] NET: Registered protocol family 44
[    0.752120] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.752572] PCI: CLS 64 bytes, default 64
[    0.752698] Unpacking initramfs...
[    2.303090] Freeing initrd memory: 34912K
[    2.303257] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x133626f6b26, max_idle_ns: 440795214178 ns
[    2.303296] clocksource: Switched to clocksource tsc
[    2.305128] Initialise system trusted keyrings
[    2.305154] Key type blacklist registered
[    2.305317] workingset: timestamp_bits=40 max_order=18 bucket_order=0
[    2.309501] zbud: loaded
[    2.310060] pstore: using deflate compression
[    2.888079] Key type asymmetric registered
[    2.888083] Asymmetric key parser 'x509' registered
[    2.888111] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    2.888248] io scheduler noop registered
[    2.888251] io scheduler deadline registered
[    2.888348] io scheduler cfq registered (default)
[    2.888351] io scheduler mq-deadline registered
[    2.888873] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.888936] efifb: probing for efifb
[    2.888968] efifb: framebuffer at 0x40000000, using 2432k, total 2432k
[    2.888971] efifb: mode is 1024x600x32, linelength=4096, pages=1
[    2.888973] efifb: scrolling: redraw
[    2.888976] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.894803] Console: switching to colour frame buffer device 128x37
[    2.900367] fb0: EFI VGA frame buffer device
[    2.900396] intel_idle: MWAIT substates: 0x33000020
[    2.900399] intel_idle: v0.4.1 model 0x37
[    2.900965] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.905491] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.925748] 00:02: ttyS0 at I/O 0x3f8 (irq = 26, base_baud = 115200) is a 16550A
[    2.949995] 80860F0A:00: ttyS1 at MMIO 0x4891b000 (irq = 16, base_baud = 2764800) is a 16550A
[    2.950179] serial serial0: tty port ttyS1 registered
[    2.969864] 80860F0A:01: ttyS2 at MMIO 0x4891d000 (irq = 17, base_baud = 2764800) is a 16550A
[    2.972684] hpet: number irqs doesn't agree with number of timers
[    2.972816] Linux agpgart interface v0.103
[    2.972937] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    2.972939] AMD IOMMUv2 functionality not available on this system
[    2.976601] i8042: PNP: No PS/2 controller found.
[    2.978478] mousedev: PS/2 mouse device common for all mice
[    2.979986] rtc_cmos 00:00: registered as rtc0
[    2.980158] rtc_cmos 00:00: no alarms, y3k, 242 bytes nvram
[    2.980286] intel_pstate: Intel P-state driver initializing
[    2.983302] ledtrig-cpu: registered to indicate activity on CPUs
[    2.986591] NET: Registered protocol family 10
[    3.034646] Segment Routing with IPv6
[    3.034767] mip6: Mobile IPv6
[    3.034781] NET: Registered protocol family 17
[    3.036310] mpls_gso: MPLS GSO support
[    3.039699] microcode: sig=0x30678, pf=0x2, revision=0x82b
[    3.040841] microcode: Microcode Update Driver: v2.2.
[    3.040945] sched_clock: Marking stable (3040085597, 694921)->(3056174178, -15393660)
[    3.047011] registered taskstats version 1
[    3.047018] Loading compiled-in X.509 certificates
[    3.148280] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    3.148322] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[    3.150120] zswap: loaded using pool lzo/zbud
[    3.151770] AppArmor: AppArmor sha1 policy hashing enabled
[    3.185606] i2c_designware 80860F41:04: I2C bus managed by PUNIT
[    3.199414] rtc_cmos 00:00: setting system clock to 2019-05-24 12:13:05 UTC (1558699985)
[    3.258059] Freeing unused kernel image memory: 1580K
[    3.272621] Write protecting the kernel read-only data: 16384k
[    3.278666] Freeing unused kernel image memory: 2028K
[    3.280587] Freeing unused kernel image memory: 916K
[    3.301390] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.301959] x86/mm: Checking user space page tables
[    3.319539] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.319544] Run /init as init process
[    3.614360] axp20x-i2c i2c-INT33F4:00: AXP20x variant AXP288 found
[    3.620261] sdhci: Secure Digital Host Controller Interface driver
[    3.620264] sdhci: Copyright(c) Pierre Ossman
[    3.623738] mmc0: SDHCI controller on ACPI [INT33BB:00] using ADMA
[    3.640847] mmc1: SDHCI controller on ACPI [80860F14:00] using ADMA
[    3.668660] mmc0: new high speed SDIO card at address 0001
[    3.671325] [Firmware Bug]: No valid trip found
[    3.678820] axp20x-i2c i2c-INT33F4:00: AXP20X driver loaded
[    3.681754] mmc2: SDHCI controller on ACPI [80860F14:02] using ADMA
[    3.707774] ACPI: bus type USB registered
[    3.707844] usbcore: registered new interface driver usbfs
[    3.707873] usbcore: registered new interface driver hub
[    3.707940] usbcore: registered new device driver usb
[    3.713577] cryptd: max_cpu_qlen set to 1000
[    3.745014] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.745031] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    3.746117] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    3.746127] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    3.749736] SSE version of gcm_enc/dec engaged.
[    3.751285] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    3.751291] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.751294] usb usb1: Product: xHCI Host Controller
[    3.751297] usb usb1: Manufacturer: Linux 4.19.0-5-amd64 xhci-hcd
[    3.751299] usb usb1: SerialNumber: 0000:00:14.0
[    3.771320] hub 1-0:1.0: USB hub found
[    3.771346] hub 1-0:1.0: 6 ports detected
[    3.774490] mmc1: new HS200 MMC card at address 0001
[    3.809991] mmc2: Problem switching card into high-speed mode!
[    3.810101] mmc2: new SDHC card at address 0001
[    3.825685] mmcblk1: mmc1:0001 016G93 14.7 GiB 
[    3.826515] mmcblk1boot0: mmc1:0001 016G93 partition 1 4.00 MiB
[    3.827375] mmcblk1boot1: mmc1:0001 016G93 partition 2 4.00 MiB
[    3.827656] mmcblk1rpmb: mmc1:0001 016G93 partition 3 512 KiB, chardev (245:0)
[    3.855538]  mmcblk1: p1 p2 p3
[    3.858597] mmcblk2: mmc2:0001 SD16G 30.0 GiB 
[    3.917742]  mmcblk2: p1 p2 p3
[    3.962026] checking generic (40000000 260000) vs hw (40000000 8000000)
[    3.962029] fb: switching to inteldrmfb from EFI VGA
[    3.962081] Console: switching to colour dummy device 80x25
[    3.962842] [drm] Replacing VGA console driver
[    3.963019] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.963021] [drm] Driver supports precise vblank timestamp query.
[    3.963825] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.971675] [drm:pwm_setup_backlight [i915]] *ERROR* Failed to own the pwm chip
[    4.198645] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[    4.200736] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.202041] acpi device:21: registered as cooling_device4
[    4.202184] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input0
[    4.202321] [drm] HDaudio controller not detected, using LPE audio instead
[    4.292535] byt_gpio INT33FC:00: [Firmware Bug]: pin 100 forcibly re-configured as GPIO
[    4.293800] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.293830] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    4.293854] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    4.296323] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    4.296331] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.296336] usb usb2: Product: xHCI Host Controller
[    4.296341] usb usb2: Manufacturer: Linux 4.19.0-5-amd64 xhci-hcd
[    4.296345] usb usb2: SerialNumber: 0000:00:14.0
[    4.297748] hub 2-0:1.0: USB hub found
[    4.297810] hub 2-0:1.0: 1 port detected
[    4.310666] fbcon: inteldrmfb (fb0) is primary device
[    4.628625] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    4.794892] usb 1-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice= 1.08
[    4.794905] usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[    4.794913] usb 1-1: Product: USB2.0 WLAN
[    4.794921] usb 1-1: Manufacturer: ATHEROS
[    4.794928] usb 1-1: SerialNumber: 12345
[    5.257731] Console: switching to colour frame buffer device 128x37
[    5.289211] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.647936] PM: Image not found (code -22)
[    7.758984] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[    8.298797] systemd[1]: Inserted module 'autofs4'
[    8.406316] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    8.425515] systemd[1]: Detected architecture x86-64.
[    8.454074] systemd[1]: Set hostname to <kafelek-debian>.
[    8.798004] systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly.
[    8.855520] systemd[1]: Listening on udev Control Socket.
[    8.855918] systemd[1]: Listening on fsck to fsckd communication Socket.
[    8.864508] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    8.864942] systemd[1]: Listening on Journal Socket.
[    8.867232] systemd[1]: Starting Set the console keyboard layout...
[    8.869963] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.925000] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro
[    8.939665] lp: driver loaded but no devices found
[    8.958336] ppdev: user-space parallel port driver
[    9.117671] systemd-journald[266]: Received request to flush runtime journal from PID 1
[    9.142414] 8723bs: disagrees about version of symbol module_layout
[    9.526208] silead: loading out-of-tree module taints kernel.
[    9.526279] silead: module verification failed: signature and/or required key missing - tainting kernel
[    9.528214] battery: ACPI: Battery: found native INT33F4 PMIC, not loading
[    9.538209] r8723bs: module is from the staging directory, the quality is unknown, you have been warned.
[    9.546256] ACPI: AC: found native INT33F4 PMIC, not loading
[    9.554966] RTL8723BS: module init start
[    9.554970] RTL8723BS: rtl8723bs v4.3.5.5_12290.20140916_BTCOEX20140507-4E40
[    9.554971] RTL8723BS: rtl8723bs BT-Coex version = BTCOEX20140507-4E40
[    9.607095] pnetdev = 0000000096a199da
[    9.636355] int3401 thermal INT3401:00: Creating sysfs group for PROC_THERMAL_PLATFORM_DEV
[    9.660120] byt_gpio INT33FC:02: [Firmware Bug]: pin 21 forcibly re-configured as GPIO
[    9.697586] silead_ts i2c-MSSL1680:00: firmware: direct-loading firmware mssl1680.fw
[    9.708650] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[    9.713408] RTL8723BS: rtw_ndev_init(wlan0)
[    9.716903] RTL8723BS: module init ret =0
[    9.748689] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[    9.773022] intel_sst_acpi 80860F28:00: Detected Baytrail-CR platform
[    9.774000] intel_sst_acpi 80860F28:00: LPE base: 0x48a00000 size:0x200000
[    9.774015] intel_sst_acpi 80860F28:00: IRAM base: 0x48ac0000
[    9.774048] intel_sst_acpi 80860F28:00: DRAM base: 0x48b00000
[    9.774058] intel_sst_acpi 80860F28:00: SHIM base: 0x48b40000
[    9.774071] intel_sst_acpi 80860F28:00: Mailbox base: 0x48b44000
[    9.774079] intel_sst_acpi 80860F28:00: DDR base: 0x20000000
[    9.774322] intel_sst_acpi 80860F28:00: Got drv data max stream 25
[    9.785707] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[    9.787453] intel_sst_acpi 80860F28:00: firmware: direct-loading firmware intel/fw_sst_0f28.bin
[    9.858776] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=0 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input1
[    9.858988] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=1 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input2
[    9.864458] iTCO_vendor_support: vendor-support=0
[    9.868682] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    9.868827] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[    9.896690] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    9.913210] Bluetooth: Core ver 2.22
[    9.913250] NET: Registered protocol family 31
[    9.913252] Bluetooth: HCI device and connection manager initialized
[    9.913259] Bluetooth: HCI socket layer initialized
[    9.913264] Bluetooth: L2CAP socket layer initialized
[    9.913280] Bluetooth: SCO socket layer initialized
[    9.940510] ACPI: AC: found native INT33F4 PMIC, not loading
[    9.979895] mmc2: Problem switching card into high-speed mode!
[   10.000042] Bluetooth: HCI UART driver ver 2.3
[   10.000047] Bluetooth: HCI UART protocol H4 registered
[   10.000049] Bluetooth: HCI UART protocol BCSP registered
[   10.000087] Bluetooth: HCI UART protocol LL registered
[   10.000089] Bluetooth: HCI UART protocol ATH3K registered
[   10.000118] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   10.001419] Bluetooth: HCI UART protocol Intel registered
[   10.001655] Bluetooth: HCI UART protocol Broadcom registered
[   10.001718] Bluetooth: HCI UART protocol QCA registered
[   10.001720] Bluetooth: HCI UART protocol AG6XX registered
[   10.001722] Bluetooth: HCI UART protocol Marvell registered
[   10.136635] input: axp20x-pek as /devices/platform/80860F41:04/i2c-4/i2c-INT33F4:00/axp221-pek/input/input3
[   10.137007] 8723bs: disagrees about version of symbol module_layout
[   10.151358] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[   10.151422] usb 1-1: firmware: failed to load ath9k_htc/htc_9271-1.4.0.fw (-2)
[   10.151536] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[   10.151665] usb 1-1: Direct firmware load for ath9k_htc/htc_9271-1.4.0.fw failed with error -2
[   10.151672] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested
[   10.151703] usb 1-1: firmware: failed to load htc_9271.fw (-2)
[   10.151785] usb 1-1: Direct firmware load for htc_9271.fw failed with error -2
[   10.151790] usb 1-1: no suitable firmware found!
[   10.152252] usb 1-1: ath9k_htc: USB layer deinitialized
[   10.152435] usbcore: registered new interface driver ath9k_htc
[   10.227418] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   10.234129] EFI Variables Facility v0.08 2004-May-17
[   10.298931] pstore: crypto_comp_decompress failed, ret = -22!
[   10.301124] pstore: decompression failed: -22
[   10.303528] pstore: crypto_comp_decompress failed, ret = -22!
[   10.305755] pstore: decompression failed: -22
[   10.309195] pstore: crypto_comp_decompress failed, ret = -22!
[   10.311389] pstore: decompression failed: -22
[   10.315613] pstore: crypto_comp_decompress failed, ret = -22!
[   10.317907] pstore: decompression failed: -22
[   10.320822] pstore: crypto_comp_decompress failed, ret = -22!
[   10.323096] pstore: decompression failed: -22
[   10.331509] pstore: crypto_comp_decompress failed, ret = -22!
[   10.333827] pstore: decompression failed: -22
[   10.335167] pstore: crypto_comp_decompress failed, ret = -22!
[   10.339017] pstore: decompression failed: -22
[   10.345375] pstore: crypto_comp_decompress failed, ret = -22!
[   10.347668] pstore: decompression failed: -22
[   10.353110] pstore: crypto_comp_decompress failed, ret = -22!
[   10.355404] pstore: decompression failed: -22
[   10.364531] pstore: crypto_comp_decompress failed, ret = -22!
[   10.366822] pstore: decompression failed: -22
[   10.371407] pstore: crypto_comp_decompress failed, ret = -22!
[   10.373718] pstore: decompression failed: -22
[   10.376690] pstore: crypto_comp_decompress failed, ret = -22!
[   10.378974] pstore: decompression failed: -22
[   10.384031] pstore: crypto_comp_decompress failed, ret = -22!
[   10.386288] pstore: decompression failed: -22
[   10.390534] pstore: crypto_comp_decompress failed, ret = -22!
[   10.392770] pstore: decompression failed: -22
[   10.412097] pstore: crypto_comp_decompress failed, ret = -22!
[   10.414237] pstore: decompression failed: -22
[   10.418838] pstore: crypto_comp_decompress failed, ret = -22!
[   10.420934] pstore: decompression failed: -22
[   10.423813] pstore: crypto_comp_decompress failed, ret = -22!
[   10.425931] pstore: decompression failed: -22
[   10.437802] pstore: crypto_comp_decompress failed, ret = -22!
[   10.439731] pstore: decompression failed: -22
[   10.442356] pstore: crypto_comp_decompress failed, ret = -22!
[   10.444322] pstore: decompression failed: -22
[   10.451740] pstore: crypto_comp_decompress failed, ret = -22!
[   10.453691] pstore: decompression failed: -22
[   10.459401] pstore: crypto_comp_decompress failed, ret = -22!
[   10.461358] pstore: decompression failed: -22
[   10.466256] pstore: crypto_comp_decompress failed, ret = -22!
[   10.468205] pstore: decompression failed: -22
[   10.470355] pstore: crypto_comp_decompress failed, ret = -22!
[   10.472274] pstore: decompression failed: -22
[   10.480450] pstore: crypto_comp_decompress failed, ret = -22!
[   10.482310] pstore: decompression failed: -22
[   10.487209] pstore: crypto_comp_decompress failed, ret = -22!
[   10.489077] pstore: decompression failed: -22
[   10.492405] Adding 985084k swap on /dev/mmcblk1p3.  Priority:-2 extents:1 across:985084k SSFS
[   10.497744] pstore: crypto_comp_decompress failed, ret = -22!
[   10.499586] pstore: decompression failed: -22
[   10.512398] pstore: crypto_comp_decompress failed, ret = -22!
[   10.514273] pstore: decompression failed: -22
[   10.523466] pstore: Registered efi as persistent store backend
[   10.617772] intel_rapl: Found RAPL domain package
[   10.617777] intel_rapl: Found RAPL domain core
[   10.680588] Bluetooth: hci0: RTL: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723

[   10.684788] Bluetooth: hci0: RTL: rom_version status=0 version=1

[   10.684793] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723bs_fw.bin

[   10.688466] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8723bs_fw.bin
[   10.688512] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723bs_config-OBDA8723.bin

[   10.689012] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8723bs_config-OBDA8723.bin
[   10.712361] Bluetooth: hci0: RTL: cfg_sz 64, total sz 24508

[   10.757205] input: gpio-keys as /devices/platform/gpio-keys.1.auto/input/input5
[   10.759409] input: gpio-keys as /devices/platform/gpio-keys.2.auto/input/input6
[   10.839986] bytcr_rt5640 bytcr_rt5640: BIOS Routing: AIF1 connected
[   10.840007] bytcr_rt5640 bytcr_rt5640: quirk IN3_MAP enabled
[   10.840011] bytcr_rt5640 bytcr_rt5640: quirk realtek,jack-detect-source 2
[   10.840014] bytcr_rt5640 bytcr_rt5640: quirk realtek,over-current-threshold-microamp 2000
[   10.840017] bytcr_rt5640 bytcr_rt5640: quirk realtek,over-current-scale-factor 1
[   10.840020] bytcr_rt5640 bytcr_rt5640: quirk DIFF_MIC enabled
[   10.840022] bytcr_rt5640 bytcr_rt5640: quirk SSP0_AIF1 enabled
[   10.840025] bytcr_rt5640 bytcr_rt5640: quirk MCLK_EN enabled
[   10.851452] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <-> media-cpu-dai mapping ok
[   10.851536] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <-> deepbuffer-cpu-dai mapping ok
[   10.856081] bytcr_rt5640 bytcr_rt5640: rt5640-aif1 <-> ssp0-port mapping ok
[   10.858822] input: bytcr-rt5640 Headset as /devices/platform/80860F28:00/bytcr_rt5640/sound/card1/input7
[   10.926871] 8723bs: disagrees about version of symbol module_layout
[   11.132663] input: silead_ts as /devices/platform/80860F41:03/i2c-3/i2c-MSSL1680:00/input/input8
[   11.249142] audit: type=1400 audit(1558699993.547:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=430 comm="apparmor_parser"
[   11.253434] audit: type=1400 audit(1558699993.551:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=429 comm="apparmor_parser"
[   11.253448] audit: type=1400 audit(1558699993.551:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=429 comm="apparmor_parser"
[   11.254052] audit: type=1400 audit(1558699993.551:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=431 comm="apparmor_parser"
[   11.254062] audit: type=1400 audit(1558699993.551:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=431 comm="apparmor_parser"
[   11.254071] audit: type=1400 audit(1558699993.551:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=431 comm="apparmor_parser"
[   11.257800] audit: type=1400 audit(1558699993.555:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi" pid=428 comm="apparmor_parser"
[   11.257817] audit: type=1400 audit(1558699993.555:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=428 comm="apparmor_parser"
[   11.298237] 8723bs: disagrees about version of symbol module_layout
[   11.951600] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.951604] Bluetooth: BNEP filters: protocol multicast
[   11.951612] Bluetooth: BNEP socket layer initialized
[   13.232981] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.237462] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin
[   13.239306] rtl8723bs mmc0:0001:1: firmware: direct-loading firmware rtlwifi/rtl8723bs_nic.bin
[   14.650706] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.811572] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   16.757990] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
[   21.247193] intel_sst_acpi 80860F28:00: FW Version 01.0c.00.01
[   24.404092] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
[   24.456616] RTL8723BS: start auth
[   24.459515] RTL8723BS: auth success, start assoc
[   24.463810] RTL8723BS: rtw_cfg80211_indicate_connect(wlan0) BSS not found !!
[   24.463822] RTL8723BS: assoc success
[   24.467971] RTL8723BS: send eapol packet
[   24.479360] RTL8723BS: send eapol packet
[   24.479641] RTL8723BS: set pairwise key camid:4, addr:00:24:b2:9a:c8:2e, kid:0, type:AES
[   24.480169] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   24.480952] RTL8723BS: set group key camid:5, addr:00:24:b2:9a:c8:2e, kid:2, type:AES
[   30.244362] Bluetooth: RFCOMM TTY layer initialized
[   30.244707] Bluetooth: RFCOMM socket layer initialized
[   30.244722] Bluetooth: RFCOMM ver 1.11
[ 3426.596197] usb usb1-port1: device 1-1 not suspended yet

6

Odp: debian 9 Lark 7i win z3735g "I2C/SD/UART"

Całkowicie OT: dostałem Kiano Intelect X3  HD+: Z8350, 4GB ramu, 32GB flash, ekran 10" 1280x800.

Technologia znów poszła do przodu, po pół dnia zabawy działa od kopa ubuntu 19.10 (kernel 5.3), wymagana była kalibracja rotacji ekranu oraz panelu dotykowego (silead). Działa BT, wifi, karta SD, wifi, ładowanie, podświetlanie, usb, przyciski, audio, wyjście słuchawkowe. Instalacja normalnie z efi.

Nie testowałem: zewnętrznej klawiatury z usb (mam ją uszkodzoną), hdmi

Nie działa: kamery, przycisk windows (pewnie dlatego że sam nie kompilowałem silead tylko poleciałem na genericu)

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

7 (edytowany przez chemik89 2019-11-26 12:19:16)

Odp: debian 9 Lark 7i win z3735g "I2C/SD/UART"

też musze swojego larka ogarnąć .. a raczej jego płyte główną bo tylko tyle z niego zostało wink przynajmniej odpada mi konfig wyświetlacza i dotyku smile ale BT by się przydał.

8

Odp: debian 9 Lark 7i win z3735g "I2C/SD/UART"

a to wszystko chodzi z chroot'a czy bootowane z karty SD?

empty

9

Odp: debian 9 Lark 7i win z3735g "I2C/SD/UART"

Z wewnętrznego dysku. To prawie zwykłe PC jest.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

10

Odp: debian 9 Lark 7i win z3735g "I2C/SD/UART"

Cezary napisał/a:

Z wewnętrznego dysku. To prawie zwykłe PC jest.

Robicie jakieś własne partycje i grzebiecie w uefi/u-boocie żeby startowało z nich?
I chodzi to równolegle/zamiennie z systemem bazowym czy dysk jest w całości zajęty nowym systemem?

empty

11

Odp: debian 9 Lark 7i win z3735g "I2C/SD/UART"

Nic a nic nie jest grzebane. I chodzi to zamiast windowsa, choć pewnie można by zainstalować obok windowsa jak każdy linux to potrafi. Naprawdę traktuj to jak zwykłego PC.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.