1 Temat przez gruniu (edytowany przez gruniu 2020-04-14 22:02:51)

  • gruniu
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2015-05-22
  • Posty: 279

Temat: TP-Link Archer C7 v2 - wiecznie jakiś problem

Oczywiście wgrane jest gargoyle.
Wcześniej miałem wszystko ustawione po DHCP. adresów IP trochę mam, bo inteligentny dom posiadam. Włączniki świateł IP itd.
Częste zanikanie wifi (szczególnie 2.4 GHz) i wyłącznie jakiegos urządzenia z sieci, to normalne u mnie.
Po kilku takich sytuacjach, przywróciłem ustawienia fabryczne i skonfigurowałem tylko połączenie z Internetem. IP urządzeń lokalnych auto.
Niestety problem dalej się pojawia.
Co dalej zrobić? Zmienić router?
A może dla testów, przywrócić oryginalne oprogramowanie?

Czy jest dostępne Gargoyle PL 1.12, w wersji sysupgrade?

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,290

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

Tak, jeżeli na oryginalnym sofcie tak ci się dzieje to raczej pada sprzęt i programowo tego nie naprawisz.

Tak, jest gargoyle 1.12 jest dostępne w sysupgrade dla tego modelu (dziwne pytanie w sumie).

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez gruniu (edytowany przez gruniu 2020-04-15 11:44:46)

  • gruniu
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2015-05-22
  • Posty: 279

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

https://dl.eko.one.pl/firmware/?vendor= … able=false

Dla wersji eu?

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,290

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

sysupgrade to jest sysupgrade, ono niema rozróżnienia wersji. factory ma bo ma nagłówki specyficzne dla jakiejś wersji regionalnej routera. Sysupgrade jest jedno.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez gruniu

  • gruniu
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2015-05-22
  • Posty: 279

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

wgralem gargoyle-1.12.0.1
potestuje - na tablecie skanuje siec analizatorem sieci

6 Odpowiedź przez gruniu

  • gruniu
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2015-05-22
  • Posty: 279

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

Niestety to samo. Czasem sieć 2.4Ghz znika.
Czym różni się gargoyle od luci?
Tylko interfejsem?

7 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,290

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

+ kilka modułów specyficznych dla gargoyle, reszta to zwykłe openwrt.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

8 Odpowiedź przez gruniu

  • gruniu
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2015-05-22
  • Posty: 279

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

To może wgram teraz openwrt z luci?

9 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,290

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

Jak pisałem - to to samo, mają te same sterowniki wifi.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

10 Odpowiedź przez arek1194

  • Zarejestrowany: 2012-11-22
  • Posty: 351

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

Witam, u mnie na WDR3600, gargoyle 1.12   też często coś wyłącza wifi (czasem wcale a czasem częściej) Wczoraj wieczorem jak byłem podłączony pod sieć potrafiło wyłączyć WiFi a dziś w nocy nawet jak router był bez klientów to też się często wyłączał.
Przeszukując forum widzę że zdarza się takie wyłączanie " AP-DISABLED"  np też tu https://eko.one.pl/forum/viewtopic.php?id=19647
czy w tym własnie wątku.
Czy dla mnie jest jakaś rada? Rozmyślałem żeby przejść na luci 18.06 ale Cezary pisze  że to to samo jeśli chodzi o WiFi ,więc domyślam się ze niema sensu.

u mnie część logu wygląda tak. Najbardziej mnie niepokoi "AP-DISABLED"  słabo umiem czytać logi, ale mam wrażenie że nie tylko WiFi się czasem wyłącza.

Sat Apr 18 03:10:26 2020 daemon.notice hostapd: wlan1: interface state ENABLED->DISABLED
Sat Apr 18 03:10:26 2020 daemon.notice hostapd: wlan1: AP-DISABLED
Sat Apr 18 03:10:26 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-TERMINATING
Sat Apr 18 03:10:26 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Sat Apr 18 03:10:26 2020 kern.info kernel: [24140.042241] device wlan1 left promiscuous mode
Sat Apr 18 03:10:26 2020 kern.info kernel: [24140.047861] br-lan: port 2(wlan1) entered disabled state
Sat Apr 18 03:10:26 2020 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Sat Apr 18 03:10:26 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Sat Apr 18 03:10:26 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sat Apr 18 03:10:26 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sat Apr 18 03:10:26 2020 kern.info kernel: [24140.059724] device wlan0 left promiscuous mode
Sat Apr 18 03:10:26 2020 kern.info kernel: [24140.064790] br-lan: port 3(wlan0) entered disabled state
Sat Apr 18 03:10:26 2020 daemon.notice netifd: Network device 'wlan0' link is down
Sat Apr 18 03:10:26 2020 daemon.notice netifd: Network device 'wlan1' link is down
Sat Apr 18 03:10:42 2020 user.notice mac80211: Failed command: iw phy phy1 set antenna all all
Sat Apr 18 03:10:42 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Sat Apr 18 03:10:43 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Sat Apr 18 03:10:43 2020 kern.info kernel: [24157.644466] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sat Apr 18 03:10:43 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Sat Apr 18 03:10:43 2020 kern.info kernel: [24157.751890] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Sat Apr 18 03:10:43 2020 kern.info kernel: [24157.804642] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:10:43 2020 kern.info kernel: [24157.810243] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:10:43 2020 kern.info kernel: [24157.816478] device wlan0 entered promiscuous mode
Sat Apr 18 03:10:43 2020 kern.info kernel: [24157.837139] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:10:43 2020 kern.info kernel: [24157.842803] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:10:43 2020 kern.info kernel: [24157.849784] device wlan1 entered promiscuous mode
Sat Apr 18 03:10:43 2020 kern.info kernel: [24157.855698] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:10:43 2020 kern.info kernel: [24157.861176] br-lan: port 3(wlan1) entered forwarding state
Sat Apr 18 03:10:43 2020 daemon.err hostapd: Using interface wlan0 with hwaddr 64:70:02:d1:67:61 and ssid "WDR2i4"
Sat Apr 18 03:10:44 2020 daemon.err hostapd: Using interface wlan1 with hwaddr 64:70:02:d1:67:62 and ssid "wdr-5"
Sat Apr 18 03:10:44 2020 kern.info kernel: [24158.721341] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:10:45 2020 kern.info kernel: [24159.803186] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sat Apr 18 03:10:45 2020 kern.info kernel: [24159.811674] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:10:45 2020 kern.info kernel: [24159.817134] br-lan: port 2(wlan0) entered forwarding state
Sat Apr 18 03:10:45 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:10:45 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Sat Apr 18 03:10:46 2020 kern.info kernel: [24159.956656] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Sat Apr 18 03:10:46 2020 kern.info kernel: [24159.963559] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:10:46 2020 kern.info kernel: [24159.969031] br-lan: port 3(wlan1) entered forwarding state
Sat Apr 18 03:10:46 2020 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:10:46 2020 daemon.notice hostapd: wlan1: AP-ENABLED
Sat Apr 18 03:10:56 2020 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Sat Apr 18 03:10:56 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Sat Apr 18 03:10:56 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sat Apr 18 03:10:56 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sat Apr 18 03:10:56 2020 kern.info kernel: [24170.385212] device wlan0 left promiscuous mode
Sat Apr 18 03:10:56 2020 kern.info kernel: [24170.390816] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:10:56 2020 daemon.notice hostapd: wlan1: interface state ENABLED->DISABLED
Sat Apr 18 03:10:56 2020 daemon.notice hostapd: wlan1: AP-DISABLED
Sat Apr 18 03:10:56 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-TERMINATING
Sat Apr 18 03:10:56 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Sat Apr 18 03:10:56 2020 kern.info kernel: [24170.441496] device wlan1 left promiscuous mode
Sat Apr 18 03:10:56 2020 kern.info kernel: [24170.447059] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:11:22 2020 user.notice mac80211: Failed command: iw phy phy1 set antenna all all
Sat Apr 18 03:11:22 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Sat Apr 18 03:11:23 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Sat Apr 18 03:11:23 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Sat Apr 18 03:11:23 2020 kern.info kernel: [24197.331333] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Sat Apr 18 03:11:23 2020 kern.info kernel: [24197.375659] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sat Apr 18 03:11:23 2020 kern.info kernel: [24197.418392] br-lan: port 2(wlan1) entered blocking state
Sat Apr 18 03:11:23 2020 kern.info kernel: [24197.425719] br-lan: port 2(wlan1) entered disabled state
Sat Apr 18 03:11:23 2020 kern.info kernel: [24197.433381] device wlan1 entered promiscuous mode
Sat Apr 18 03:11:23 2020 daemon.err hostapd: Using interface wlan1 with hwaddr 64:70:02:d1:67:62 and ssid "wdr-5"
Sat Apr 18 03:11:23 2020 kern.info kernel: [24197.555211] br-lan: port 3(wlan0) entered blocking state
Sat Apr 18 03:11:23 2020 kern.info kernel: [24197.562464] br-lan: port 3(wlan0) entered disabled state
Sat Apr 18 03:11:23 2020 kern.info kernel: [24197.570025] device wlan0 entered promiscuous mode
Sat Apr 18 03:11:23 2020 kern.info kernel: [24197.575889] br-lan: port 3(wlan0) entered blocking state
Sat Apr 18 03:11:23 2020 kern.info kernel: [24197.581397] br-lan: port 3(wlan0) entered forwarding state
Sat Apr 18 03:11:23 2020 daemon.err hostapd: Using interface wlan0 with hwaddr 64:70:02:d1:67:61 and ssid "WDR2i4"
Sat Apr 18 03:11:24 2020 kern.info kernel: [24198.401209] br-lan: port 3(wlan0) entered disabled state
Sat Apr 18 03:11:25 2020 kern.info kernel: [24199.198791] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Sat Apr 18 03:11:25 2020 kern.info kernel: [24199.205959] br-lan: port 2(wlan1) entered blocking state
Sat Apr 18 03:11:25 2020 kern.info kernel: [24199.211453] br-lan: port 2(wlan1) entered forwarding state
Sat Apr 18 03:11:25 2020 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:11:25 2020 daemon.notice hostapd: wlan1: AP-ENABLED
Sat Apr 18 03:11:25 2020 kern.info kernel: [24199.309264] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sat Apr 18 03:11:25 2020 kern.info kernel: [24199.316342] br-lan: port 3(wlan0) entered blocking state
Sat Apr 18 03:11:25 2020 kern.info kernel: [24199.321867] br-lan: port 3(wlan0) entered forwarding state
Sat Apr 18 03:11:25 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:11:25 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Sat Apr 18 03:11:28 2020 daemon.notice hostapd: wlan1: interface state ENABLED->DISABLED
Sat Apr 18 03:11:28 2020 daemon.notice hostapd: wlan1: AP-DISABLED
Sat Apr 18 03:11:28 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-TERMINATING
Sat Apr 18 03:11:28 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Sat Apr 18 03:11:28 2020 kern.info kernel: [24202.624735] device wlan1 left promiscuous mode
Sat Apr 18 03:11:28 2020 kern.info kernel: [24202.629617] br-lan: port 2(wlan1) entered disabled state
Sat Apr 18 03:11:28 2020 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Sat Apr 18 03:11:28 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Sat Apr 18 03:11:28 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sat Apr 18 03:11:28 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sat Apr 18 03:11:28 2020 kern.info kernel: [24202.640532] device wlan0 left promiscuous mode
Sat Apr 18 03:11:28 2020 kern.info kernel: [24202.645355] br-lan: port 3(wlan0) entered disabled state
Sat Apr 18 03:11:31 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Sat Apr 18 03:11:31 2020 user.notice mac80211: Failed command: iw phy phy1 set antenna all all
Sat Apr 18 03:11:32 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Sat Apr 18 03:11:32 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Sat Apr 18 03:11:32 2020 kern.info kernel: [24206.412038] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sat Apr 18 03:11:32 2020 kern.info kernel: [24206.469913] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Sat Apr 18 03:11:32 2020 kern.info kernel: [24206.531216] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:11:32 2020 kern.info kernel: [24206.538405] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:11:32 2020 kern.info kernel: [24206.546050] device wlan0 entered promiscuous mode
Sat Apr 18 03:11:32 2020 kern.info kernel: [24206.574246] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:11:32 2020 kern.info kernel: [24206.579873] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:11:32 2020 kern.info kernel: [24206.590535] device wlan1 entered promiscuous mode
Sat Apr 18 03:11:32 2020 kern.info kernel: [24206.597236] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:11:32 2020 kern.info kernel: [24206.602769] br-lan: port 3(wlan1) entered forwarding state
Sat Apr 18 03:11:32 2020 daemon.err hostapd: Using interface wlan0 with hwaddr 64:70:02:d1:67:61 and ssid "WDR2i4"
Sat Apr 18 03:11:32 2020 daemon.err hostapd: Using interface wlan1 with hwaddr 64:70:02:d1:67:62 and ssid "wdr-5"
Sat Apr 18 03:11:33 2020 kern.info kernel: [24207.440102] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:11:34 2020 kern.info kernel: [24208.646799] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sat Apr 18 03:11:34 2020 kern.info kernel: [24208.653796] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:11:34 2020 kern.info kernel: [24208.659272] br-lan: port 2(wlan0) entered forwarding state
Sat Apr 18 03:11:34 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:11:34 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Sat Apr 18 03:11:34 2020 kern.info kernel: [24208.866746] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Sat Apr 18 03:11:34 2020 kern.info kernel: [24208.873779] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:11:34 2020 kern.info kernel: [24208.879231] br-lan: port 3(wlan1) entered forwarding state
Sat Apr 18 03:11:34 2020 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:11:34 2020 daemon.notice hostapd: wlan1: AP-ENABLED
Sat Apr 18 03:11:36 2020 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Sat Apr 18 03:11:36 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Sat Apr 18 03:11:36 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sat Apr 18 03:11:36 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sat Apr 18 03:11:36 2020 kern.info kernel: [24210.019265] device wlan0 left promiscuous mode
Sat Apr 18 03:11:36 2020 kern.info kernel: [24210.025563] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:11:37 2020 daemon.notice hostapd: wlan1: interface state ENABLED->DISABLED
Sat Apr 18 03:11:37 2020 daemon.notice hostapd: wlan1: AP-DISABLED
Sat Apr 18 03:11:37 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-TERMINATING
Sat Apr 18 03:11:37 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Sat Apr 18 03:11:37 2020 kern.info kernel: [24211.117700] device wlan1 left promiscuous mode
Sat Apr 18 03:11:37 2020 kern.info kernel: [24211.123348] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:11:38 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Sat Apr 18 03:11:39 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Sat Apr 18 03:11:39 2020 kern.info kernel: [24213.373375] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sat Apr 18 03:11:39 2020 kern.info kernel: [24213.485685] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:11:39 2020 kern.info kernel: [24213.494506] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:11:39 2020 kern.info kernel: [24213.500671] device wlan0 entered promiscuous mode
Sat Apr 18 03:11:39 2020 user.notice mac80211: Failed command: iw phy phy1 set antenna all all
Sat Apr 18 03:11:39 2020 daemon.err hostapd: Using interface wlan0 with hwaddr 64:70:02:d1:67:61 and ssid "WDR2i4"
Sat Apr 18 03:11:40 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Sat Apr 18 03:11:41 2020 kern.info kernel: [24214.969074] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Sat Apr 18 03:11:41 2020 kern.info kernel: [24215.037631] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:11:41 2020 kern.info kernel: [24215.043308] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:11:41 2020 kern.info kernel: [24215.049409] device wlan1 entered promiscuous mode
Sat Apr 18 03:11:41 2020 daemon.err hostapd: Using interface wlan1 with hwaddr 64:70:02:d1:67:62 and ssid "wdr-5"
Sat Apr 18 03:11:41 2020 kern.info kernel: [24215.827785] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sat Apr 18 03:11:41 2020 kern.info kernel: [24215.834787] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:11:41 2020 kern.info kernel: [24215.840293] br-lan: port 2(wlan0) entered forwarding state
Sat Apr 18 03:11:41 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:11:41 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Sat Apr 18 03:11:43 2020 kern.info kernel: [24217.067390] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Sat Apr 18 03:11:43 2020 kern.info kernel: [24217.074423] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:11:43 2020 kern.info kernel: [24217.079912] br-lan: port 3(wlan1) entered forwarding state
Sat Apr 18 03:11:43 2020 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:11:43 2020 daemon.notice hostapd: wlan1: AP-ENABLED
Sat Apr 18 03:11:43 2020 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Sat Apr 18 03:11:43 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Sat Apr 18 03:11:43 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sat Apr 18 03:11:43 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sat Apr 18 03:11:43 2020 kern.info kernel: [24217.429108] device wlan0 left promiscuous mode
Sat Apr 18 03:11:43 2020 kern.info kernel: [24217.434024] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:11:43 2020 daemon.notice netifd: radio0 (7305): WARNING: Variable 'data' does not exist or is not an array/object
Sat Apr 18 03:11:44 2020 daemon.notice hostapd: wlan1: interface state ENABLED->DISABLED
Sat Apr 18 03:11:44 2020 daemon.notice hostapd: wlan1: AP-DISABLED
Sat Apr 18 03:11:44 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-TERMINATING
Sat Apr 18 03:11:44 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Sat Apr 18 03:11:44 2020 kern.info kernel: [24218.753512] device wlan1 left promiscuous mode
Sat Apr 18 03:11:44 2020 kern.info kernel: [24218.758334] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:11:45 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Sat Apr 18 03:11:46 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Sat Apr 18 03:11:46 2020 kern.info kernel: [24220.753969] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sat Apr 18 03:11:46 2020 kern.info kernel: [24220.845041] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:11:46 2020 kern.info kernel: [24220.850730] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:11:46 2020 kern.info kernel: [24220.856831] device wlan0 entered promiscuous mode
Sat Apr 18 03:11:46 2020 daemon.err hostapd: Using interface wlan0 with hwaddr 64:70:02:d1:67:61 and ssid "WDR2i4"
Sat Apr 18 03:11:47 2020 user.notice mac80211: Failed command: iw phy phy1 set antenna all all
Sat Apr 18 03:11:48 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Sat Apr 18 03:11:48 2020 kern.info kernel: [24222.410856] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Sat Apr 18 03:11:48 2020 kern.info kernel: [24222.514946] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:11:48 2020 kern.info kernel: [24222.526256] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:11:48 2020 kern.info kernel: [24222.533909] device wlan1 entered promiscuous mode
Sat Apr 18 03:11:48 2020 daemon.err hostapd: Using interface wlan1 with hwaddr 64:70:02:d1:67:62 and ssid "wdr-5"
Sat Apr 18 03:11:49 2020 kern.info kernel: [24223.134805] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sat Apr 18 03:11:49 2020 kern.info kernel: [24223.143127] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:11:49 2020 kern.info kernel: [24223.148610] br-lan: port 2(wlan0) entered forwarding state
Sat Apr 18 03:11:49 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:11:49 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Sat Apr 18 03:11:50 2020 kern.info kernel: [24224.152054] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Sat Apr 18 03:11:50 2020 kern.info kernel: [24224.159064] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:11:50 2020 kern.info kernel: [24224.164583] br-lan: port 3(wlan1) entered forwarding state
Sat Apr 18 03:11:50 2020 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:11:50 2020 daemon.notice hostapd: wlan1: AP-ENABLED
Sat Apr 18 03:11:55 2020 daemon.notice hostapd: wlan1: interface state ENABLED->DISABLED
Sat Apr 18 03:11:55 2020 daemon.notice hostapd: wlan1: AP-DISABLED
Sat Apr 18 03:11:55 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-TERMINATING
Sat Apr 18 03:11:55 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Sat Apr 18 03:11:55 2020 kern.info kernel: [24229.229906] device wlan1 left promiscuous mode
Sat Apr 18 03:11:55 2020 kern.info kernel: [24229.235638] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:11:55 2020 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Sat Apr 18 03:11:55 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Sat Apr 18 03:11:55 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sat Apr 18 03:11:55 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sat Apr 18 03:11:55 2020 kern.info kernel: [24229.250004] device wlan0 left promiscuous mode
Sat Apr 18 03:11:55 2020 kern.info kernel: [24229.255703] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:11:55 2020 daemon.notice netifd: radio0 (7670): WARNING: Variable 'data' does not exist or is not an array/object
Sat Apr 18 03:11:57 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Sat Apr 18 03:11:57 2020 user.notice mac80211: Failed command: iw phy phy1 set antenna all all
Sat Apr 18 03:11:58 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Sat Apr 18 03:11:58 2020 kern.info kernel: [24232.098813] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sat Apr 18 03:11:58 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Sat Apr 18 03:11:58 2020 kern.info kernel: [24232.293060] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Sat Apr 18 03:11:58 2020 kern.info kernel: [24232.304017] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:11:58 2020 kern.info kernel: [24232.311335] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:11:58 2020 kern.info kernel: [24232.318901] device wlan0 entered promiscuous mode
Sat Apr 18 03:11:58 2020 kern.info kernel: [24232.385977] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:11:58 2020 kern.info kernel: [24232.393291] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:11:58 2020 kern.info kernel: [24232.399733] device wlan1 entered promiscuous mode
Sat Apr 18 03:11:58 2020 kern.info kernel: [24232.404956] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:11:58 2020 kern.info kernel: [24232.410494] br-lan: port 3(wlan1) entered forwarding state
Sat Apr 18 03:11:58 2020 daemon.err hostapd: Using interface wlan0 with hwaddr 64:70:02:d1:67:61 and ssid "WDR2i4"
Sat Apr 18 03:11:58 2020 daemon.err hostapd: Using interface wlan1 with hwaddr 64:70:02:d1:67:62 and ssid "wdr-5"
Sat Apr 18 03:11:59 2020 kern.info kernel: [24233.119433] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:12:00 2020 kern.info kernel: [24234.129424] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sat Apr 18 03:12:00 2020 kern.info kernel: [24234.136432] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:12:00 2020 kern.info kernel: [24234.141929] br-lan: port 2(wlan0) entered forwarding state
Sat Apr 18 03:12:00 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:12:00 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Sat Apr 18 03:12:00 2020 kern.info kernel: [24234.242938] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Sat Apr 18 03:12:00 2020 kern.info kernel: [24234.251457] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:12:00 2020 kern.info kernel: [24234.256922] br-lan: port 3(wlan1) entered forwarding state
Sat Apr 18 03:12:00 2020 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:12:00 2020 daemon.notice hostapd: wlan1: AP-ENABLED
Sat Apr 18 03:12:00 2020 daemon.notice netifd: Network device 'wlan0' link is up
Sat Apr 18 03:12:00 2020 daemon.notice netifd: Network device 'wlan1' link is up
Sat Apr 18 03:13:36 2020 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Sat Apr 18 03:13:36 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Sat Apr 18 03:13:36 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sat Apr 18 03:13:36 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sat Apr 18 03:13:36 2020 kern.info kernel: [24330.061468] device wlan0 left promiscuous mode
Sat Apr 18 03:13:36 2020 kern.info kernel: [24330.067130] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:13:36 2020 daemon.notice netifd: Network device 'wlan0' link is down
Sat Apr 18 03:13:36 2020 daemon.notice hostapd: wlan1: interface state ENABLED->DISABLED
Sat Apr 18 03:13:36 2020 daemon.notice hostapd: wlan1: AP-DISABLED
Sat Apr 18 03:13:36 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-TERMINATING
Sat Apr 18 03:13:36 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Sat Apr 18 03:13:36 2020 kern.info kernel: [24330.113665] device wlan1 left promiscuous mode
Sat Apr 18 03:13:36 2020 kern.info kernel: [24330.119391] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:13:36 2020 daemon.notice netifd: Network device 'wlan1' link is down
Sat Apr 18 03:13:38 2020 user.notice mac80211: Failed command: iw phy phy1 set antenna all all
Sat Apr 18 03:13:38 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Sat Apr 18 03:13:39 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Sat Apr 18 03:13:39 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Sat Apr 18 03:13:39 2020 kern.info kernel: [24333.579419] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sat Apr 18 03:13:39 2020 kern.info kernel: [24333.612644] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Sat Apr 18 03:13:39 2020 kern.info kernel: [24333.664076] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:13:39 2020 kern.info kernel: [24333.669889] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:13:39 2020 kern.info kernel: [24333.675894] device wlan0 entered promiscuous mode
Sat Apr 18 03:13:39 2020 kern.info kernel: [24333.691018] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:13:39 2020 kern.info kernel: [24333.696775] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:13:39 2020 kern.info kernel: [24333.702860] device wlan1 entered promiscuous mode
Sat Apr 18 03:13:39 2020 kern.info kernel: [24333.708008] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:13:39 2020 kern.info kernel: [24333.713454] br-lan: port 3(wlan1) entered forwarding state
Sat Apr 18 03:13:39 2020 daemon.err hostapd: Using interface wlan0 with hwaddr 64:70:02:d1:67:61 and ssid "WDR2i4"
Sat Apr 18 03:13:39 2020 daemon.err hostapd: Using interface wlan1 with hwaddr 64:70:02:d1:67:62 and ssid "wdr-5"
Sat Apr 18 03:13:40 2020 kern.info kernel: [24334.637150] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:13:41 2020 kern.info kernel: [24335.803869] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sat Apr 18 03:13:41 2020 kern.info kernel: [24335.810897] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:13:41 2020 kern.info kernel: [24335.816400] br-lan: port 2(wlan0) entered forwarding state
Sat Apr 18 03:13:41 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:13:41 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Sat Apr 18 03:13:42 2020 kern.info kernel: [24335.942501] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Sat Apr 18 03:13:42 2020 kern.info kernel: [24335.949530] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:13:42 2020 kern.info kernel: [24335.954984] br-lan: port 3(wlan1) entered forwarding state
Sat Apr 18 03:13:42 2020 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:13:42 2020 daemon.notice hostapd: wlan1: AP-ENABLED
Sat Apr 18 03:13:44 2020 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Sat Apr 18 03:13:44 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Sat Apr 18 03:13:44 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sat Apr 18 03:13:44 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sat Apr 18 03:13:44 2020 kern.info kernel: [24338.142964] device wlan0 left promiscuous mode
Sat Apr 18 03:13:44 2020 kern.info kernel: [24338.147954] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:13:44 2020 daemon.notice hostapd: wlan1: interface state ENABLED->DISABLED
Sat Apr 18 03:13:44 2020 daemon.notice hostapd: wlan1: AP-DISABLED
Sat Apr 18 03:13:44 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-TERMINATING
Sat Apr 18 03:13:44 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Sat Apr 18 03:13:44 2020 kern.info kernel: [24338.181601] device wlan1 left promiscuous mode
Sat Apr 18 03:13:44 2020 kern.info kernel: [24338.186519] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:13:46 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Sat Apr 18 03:13:46 2020 user.notice mac80211: Failed command: iw phy phy1 set antenna all all
Sat Apr 18 03:13:47 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Sat Apr 18 03:13:47 2020 kern.info kernel: [24341.445251] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sat Apr 18 03:13:47 2020 kern.info kernel: [24341.626040] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:13:47 2020 kern.info kernel: [24341.633354] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:13:47 2020 kern.info kernel: [24341.640082] device wlan0 entered promiscuous mode
Sat Apr 18 03:13:47 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Sat Apr 18 03:13:47 2020 kern.info kernel: [24341.702731] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Sat Apr 18 03:13:47 2020 daemon.err hostapd: Using interface wlan0 with hwaddr 64:70:02:d1:67:61 and ssid "WDR2i4"
Sat Apr 18 03:13:47 2020 kern.info kernel: [24341.782611] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:13:47 2020 kern.info kernel: [24341.789850] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:13:47 2020 kern.info kernel: [24341.795905] device wlan1 entered promiscuous mode
Sat Apr 18 03:13:47 2020 kern.info kernel: [24341.801179] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:13:47 2020 kern.info kernel: [24341.806684] br-lan: port 3(wlan1) entered forwarding state
Sat Apr 18 03:13:47 2020 daemon.err hostapd: Using interface wlan1 with hwaddr 64:70:02:d1:67:62 and ssid "wdr-5"
Sat Apr 18 03:13:48 2020 kern.info kernel: [24342.479469] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:13:49 2020 kern.info kernel: [24343.783737] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sat Apr 18 03:13:49 2020 kern.info kernel: [24343.790717] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:13:49 2020 kern.info kernel: [24343.796178] br-lan: port 2(wlan0) entered forwarding state
Sat Apr 18 03:13:49 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:13:49 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Sat Apr 18 03:13:50 2020 kern.info kernel: [24343.950103] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Sat Apr 18 03:13:50 2020 kern.info kernel: [24343.958627] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:13:50 2020 kern.info kernel: [24343.964107] br-lan: port 3(wlan1) entered forwarding state
Sat Apr 18 03:13:50 2020 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:13:50 2020 daemon.notice hostapd: wlan1: AP-ENABLED
Sat Apr 18 03:13:51 2020 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Sat Apr 18 03:13:51 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Sat Apr 18 03:13:51 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sat Apr 18 03:13:51 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sat Apr 18 03:13:51 2020 kern.info kernel: [24345.882042] device wlan0 left promiscuous mode
Sat Apr 18 03:13:51 2020 kern.info kernel: [24345.887762] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:13:51 2020 daemon.notice hostapd: wlan1: interface state ENABLED->DISABLED
Sat Apr 18 03:13:51 2020 daemon.notice hostapd: wlan1: AP-DISABLED
Sat Apr 18 03:13:51 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-TERMINATING
Sat Apr 18 03:13:51 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Sat Apr 18 03:13:51 2020 kern.info kernel: [24345.941015] device wlan1 left promiscuous mode
Sat Apr 18 03:13:51 2020 kern.info kernel: [24345.945925] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:13:52 2020 daemon.notice netifd: radio0 (8542): WARNING: Variable 'data' does not exist or is not an array/object
Sat Apr 18 03:13:52 2020 daemon.notice netifd: radio1 (8543): WARNING: Variable 'data' does not exist or is not an array/object
Sat Apr 18 03:13:54 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Sat Apr 18 03:13:54 2020 user.notice mac80211: Failed command: iw phy phy1 set antenna all all
Sat Apr 18 03:13:55 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Sat Apr 18 03:13:55 2020 kern.info kernel: [24349.423790] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sat Apr 18 03:13:55 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Sat Apr 18 03:13:55 2020 kern.info kernel: [24349.566840] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Sat Apr 18 03:13:55 2020 kern.info kernel: [24349.580783] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:13:55 2020 kern.info kernel: [24349.586380] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:13:55 2020 kern.info kernel: [24349.592606] device wlan0 entered promiscuous mode
Sat Apr 18 03:13:55 2020 kern.info kernel: [24349.669783] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:13:55 2020 kern.info kernel: [24349.675407] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:13:55 2020 kern.info kernel: [24349.684693] device wlan1 entered promiscuous mode
Sat Apr 18 03:13:55 2020 kern.info kernel: [24349.689835] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:13:55 2020 kern.info kernel: [24349.695310] br-lan: port 3(wlan1) entered forwarding state
Sat Apr 18 03:13:55 2020 daemon.err hostapd: Using interface wlan0 with hwaddr 64:70:02:d1:67:61 and ssid "WDR2i4"
Sat Apr 18 03:13:55 2020 daemon.err hostapd: Using interface wlan1 with hwaddr 64:70:02:d1:67:62 and ssid "wdr-5"
Sat Apr 18 03:13:56 2020 kern.info kernel: [24350.485028] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:13:57 2020 kern.info kernel: [24351.843123] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sat Apr 18 03:13:57 2020 kern.info kernel: [24351.850113] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:13:57 2020 kern.info kernel: [24351.855560] br-lan: port 2(wlan0) entered forwarding state
Sat Apr 18 03:13:57 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:13:57 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Sat Apr 18 03:13:58 2020 kern.info kernel: [24351.996930] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Sat Apr 18 03:13:58 2020 kern.info kernel: [24352.005359] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:13:58 2020 kern.info kernel: [24352.010887] br-lan: port 3(wlan1) entered forwarding state
Sat Apr 18 03:13:58 2020 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:13:58 2020 daemon.notice hostapd: wlan1: AP-ENABLED
Sat Apr 18 03:13:59 2020 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Sat Apr 18 03:13:59 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Sat Apr 18 03:13:59 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sat Apr 18 03:13:59 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sat Apr 18 03:13:59 2020 kern.info kernel: [24353.013161] device wlan0 left promiscuous mode
Sat Apr 18 03:13:59 2020 kern.info kernel: [24353.018804] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:14:00 2020 daemon.notice hostapd: wlan1: interface state ENABLED->DISABLED
Sat Apr 18 03:14:00 2020 daemon.notice hostapd: wlan1: AP-DISABLED
Sat Apr 18 03:14:00 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-TERMINATING
Sat Apr 18 03:14:00 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Sat Apr 18 03:14:00 2020 kern.info kernel: [24354.682888] device wlan1 left promiscuous mode
Sat Apr 18 03:14:00 2020 kern.info kernel: [24354.687797] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:14:00 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Sat Apr 18 03:14:01 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Sat Apr 18 03:14:01 2020 kern.info kernel: [24355.949130] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sat Apr 18 03:14:02 2020 kern.info kernel: [24356.106749] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:14:02 2020 kern.info kernel: [24356.112467] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:14:02 2020 kern.info kernel: [24356.118503] device wlan0 entered promiscuous mode
Sat Apr 18 03:14:02 2020 daemon.err hostapd: Using interface wlan0 with hwaddr 64:70:02:d1:67:61 and ssid "WDR2i4"
Sat Apr 18 03:14:02 2020 user.notice mac80211: Failed command: iw phy phy1 set antenna all all
Sat Apr 18 03:14:03 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Sat Apr 18 03:14:03 2020 kern.info kernel: [24357.766740] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Sat Apr 18 03:14:03 2020 kern.info kernel: [24357.809533] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sat Apr 18 03:14:03 2020 kern.info kernel: [24357.818056] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:14:03 2020 kern.info kernel: [24357.823518] br-lan: port 2(wlan0) entered forwarding state
Sat Apr 18 03:14:03 2020 kern.info kernel: [24357.935750] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:14:03 2020 kern.info kernel: [24357.941657] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:14:03 2020 kern.info kernel: [24357.947817] device wlan1 entered promiscuous mode
Sat Apr 18 03:14:04 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:14:04 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Sat Apr 18 03:14:04 2020 daemon.err hostapd: Using interface wlan1 with hwaddr 64:70:02:d1:67:62 and ssid "wdr-5"
Sat Apr 18 03:14:05 2020 kern.info kernel: [24359.198111] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Sat Apr 18 03:14:05 2020 kern.info kernel: [24359.206643] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:14:05 2020 kern.info kernel: [24359.212112] br-lan: port 3(wlan1) entered forwarding state
Sat Apr 18 03:14:05 2020 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:14:05 2020 daemon.notice hostapd: wlan1: AP-ENABLED
Sat Apr 18 03:14:14 2020 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Sat Apr 18 03:14:14 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Sat Apr 18 03:14:14 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sat Apr 18 03:14:14 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sat Apr 18 03:14:14 2020 kern.info kernel: [24368.473995] device wlan0 left promiscuous mode
Sat Apr 18 03:14:14 2020 kern.info kernel: [24368.479725] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:14:15 2020 daemon.notice hostapd: wlan1: interface state ENABLED->DISABLED
Sat Apr 18 03:14:15 2020 daemon.notice hostapd: wlan1: AP-DISABLED
Sat Apr 18 03:14:15 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-TERMINATING
Sat Apr 18 03:14:15 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Sat Apr 18 03:14:15 2020 kern.info kernel: [24369.510667] device wlan1 left promiscuous mode
Sat Apr 18 03:14:15 2020 kern.info kernel: [24369.517179] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:14:15 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Sat Apr 18 03:14:17 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Sat Apr 18 03:14:17 2020 kern.info kernel: [24371.088475] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sat Apr 18 03:14:17 2020 kern.info kernel: [24371.221204] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:14:17 2020 kern.info kernel: [24371.226884] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:14:17 2020 kern.info kernel: [24371.232988] device wlan0 entered promiscuous mode
Sat Apr 18 03:14:17 2020 daemon.err hostapd: Using interface wlan0 with hwaddr 64:70:02:d1:67:61 and ssid "WDR2i4"
Sat Apr 18 03:14:18 2020 user.notice mac80211: Failed command: iw phy phy1 set antenna all all
Sat Apr 18 03:14:19 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Sat Apr 18 03:14:19 2020 kern.info kernel: [24373.421429] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sat Apr 18 03:14:19 2020 kern.info kernel: [24373.428454] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:14:19 2020 kern.info kernel: [24373.433909] br-lan: port 2(wlan0) entered forwarding state
Sat Apr 18 03:14:19 2020 kern.info kernel: [24373.485083] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Sat Apr 18 03:14:19 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:14:19 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Sat Apr 18 03:14:19 2020 kern.info kernel: [24373.590915] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:14:19 2020 kern.info kernel: [24373.602248] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:14:19 2020 kern.info kernel: [24373.609951] device wlan1 entered promiscuous mode
Sat Apr 18 03:14:19 2020 kern.info kernel: [24373.615915] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:14:19 2020 kern.info kernel: [24373.621370] br-lan: port 3(wlan1) entered forwarding state
Sat Apr 18 03:14:19 2020 daemon.err hostapd: Using interface wlan1 with hwaddr 64:70:02:d1:67:62 and ssid "wdr-5"
Sat Apr 18 03:14:20 2020 kern.info kernel: [24374.479486] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:14:21 2020 kern.info kernel: [24375.117909] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Sat Apr 18 03:14:21 2020 kern.info kernel: [24375.126426] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:14:21 2020 kern.info kernel: [24375.131887] br-lan: port 3(wlan1) entered forwarding state
Sat Apr 18 03:14:21 2020 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:14:21 2020 daemon.notice hostapd: wlan1: AP-ENABLED
Sat Apr 18 03:14:30 2020 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Sat Apr 18 03:14:30 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Sat Apr 18 03:14:30 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sat Apr 18 03:14:30 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sat Apr 18 03:14:30 2020 kern.info kernel: [24384.157660] device wlan0 left promiscuous mode
Sat Apr 18 03:14:30 2020 kern.info kernel: [24384.163326] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:14:31 2020 daemon.notice hostapd: wlan1: interface state ENABLED->DISABLED
Sat Apr 18 03:14:31 2020 daemon.notice hostapd: wlan1: AP-DISABLED
Sat Apr 18 03:14:31 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-TERMINATING
Sat Apr 18 03:14:31 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Sat Apr 18 03:14:31 2020 kern.info kernel: [24385.531140] device wlan1 left promiscuous mode
Sat Apr 18 03:14:31 2020 kern.info kernel: [24385.536965] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:14:31 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Sat Apr 18 03:14:32 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Sat Apr 18 03:14:32 2020 kern.info kernel: [24386.375990] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sat Apr 18 03:14:32 2020 kern.info kernel: [24386.471432] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:14:32 2020 kern.info kernel: [24386.477225] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:14:32 2020 kern.info kernel: [24386.483193] device wlan0 entered promiscuous mode
Sat Apr 18 03:14:32 2020 kern.info kernel: [24386.488987] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:14:32 2020 kern.info kernel: [24386.494463] br-lan: port 2(wlan0) entered forwarding state
Sat Apr 18 03:14:32 2020 kern.info kernel: [24386.585618] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:14:32 2020 daemon.err hostapd: Using interface wlan0 with hwaddr 64:70:02:d1:67:61 and ssid "WDR2i4"
Sat Apr 18 03:14:33 2020 kern.info kernel: [24387.399128] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sat Apr 18 03:14:33 2020 kern.info kernel: [24387.406258] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:14:33 2020 kern.info kernel: [24387.411710] br-lan: port 2(wlan0) entered forwarding state
Sat Apr 18 03:14:33 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:14:33 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Sat Apr 18 03:14:43 2020 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Sat Apr 18 03:14:43 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Sat Apr 18 03:14:43 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sat Apr 18 03:14:43 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sat Apr 18 03:14:43 2020 kern.info kernel: [24397.701789] device wlan0 left promiscuous mode
Sat Apr 18 03:14:43 2020 kern.info kernel: [24397.707415] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:14:52 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Sat Apr 18 03:14:52 2020 user.notice mac80211: Failed command: iw phy phy1 set antenna all all
Sat Apr 18 03:14:53 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Sat Apr 18 03:14:53 2020 kern.info kernel: [24407.670288] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sat Apr 18 03:14:53 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Sat Apr 18 03:14:53 2020 kern.info kernel: [24407.813484] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Sat Apr 18 03:14:53 2020 kern.info kernel: [24407.844424] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:14:53 2020 kern.info kernel: [24407.850054] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:14:53 2020 kern.info kernel: [24407.856089] device wlan0 entered promiscuous mode
Sat Apr 18 03:14:53 2020 daemon.err hostapd: Using interface wlan0 with hwaddr 64:70:02:d1:67:61 and ssid "WDR2i4"
Sat Apr 18 03:14:54 2020 kern.info kernel: [24407.942229] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:14:54 2020 kern.info kernel: [24407.949529] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:14:54 2020 kern.info kernel: [24407.957300] device wlan1 entered promiscuous mode
Sat Apr 18 03:14:54 2020 kern.info kernel: [24407.963122] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:14:54 2020 kern.info kernel: [24407.968630] br-lan: port 3(wlan1) entered forwarding state
Sat Apr 18 03:14:54 2020 daemon.err hostapd: Using interface wlan1 with hwaddr 64:70:02:d1:67:62 and ssid "wdr-5"
Sat Apr 18 03:14:54 2020 kern.info kernel: [24408.715025] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:14:55 2020 kern.info kernel: [24409.466886] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sat Apr 18 03:14:55 2020 kern.info kernel: [24409.473874] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:14:55 2020 kern.info kernel: [24409.479381] br-lan: port 2(wlan0) entered forwarding state
Sat Apr 18 03:14:55 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:14:55 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Sat Apr 18 03:14:55 2020 kern.info kernel: [24409.554137] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Sat Apr 18 03:14:55 2020 kern.info kernel: [24409.561312] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:14:55 2020 kern.info kernel: [24409.566829] br-lan: port 3(wlan1) entered forwarding state
Sat Apr 18 03:14:55 2020 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:14:55 2020 daemon.notice hostapd: wlan1: AP-ENABLED
Sat Apr 18 03:15:06 2020 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Sat Apr 18 03:15:06 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Sat Apr 18 03:15:06 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sat Apr 18 03:15:06 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sat Apr 18 03:15:06 2020 kern.info kernel: [24420.038264] device wlan0 left promiscuous mode
Sat Apr 18 03:15:06 2020 kern.info kernel: [24420.043141] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:15:06 2020 daemon.notice hostapd: wlan1: interface state ENABLED->DISABLED
Sat Apr 18 03:15:06 2020 daemon.notice hostapd: wlan1: AP-DISABLED
Sat Apr 18 03:15:06 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-TERMINATING
Sat Apr 18 03:15:06 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Sat Apr 18 03:15:06 2020 kern.info kernel: [24420.081499] device wlan1 left promiscuous mode
Sat Apr 18 03:15:06 2020 kern.info kernel: [24420.087204] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:15:07 2020 user.notice mac80211: Failed command: iw phy phy1 set antenna all all
Sat Apr 18 03:15:07 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Sat Apr 18 03:15:08 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Sat Apr 18 03:15:08 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Sat Apr 18 03:15:08 2020 kern.info kernel: [24422.851864] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sat Apr 18 03:15:08 2020 kern.info kernel: [24422.910763] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Sat Apr 18 03:15:09 2020 kern.info kernel: [24423.018290] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:15:09 2020 kern.info kernel: [24423.024414] br-lan: port 2(wlan0) entered disabled state
Sat Apr 18 03:15:09 2020 kern.info kernel: [24423.033523] device wlan0 entered promiscuous mode
Sat Apr 18 03:15:09 2020 kern.info kernel: [24423.063370] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:15:09 2020 kern.info kernel: [24423.070631] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:15:09 2020 kern.info kernel: [24423.078222] device wlan1 entered promiscuous mode
Sat Apr 18 03:15:09 2020 kern.info kernel: [24423.084108] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:15:09 2020 kern.info kernel: [24423.089608] br-lan: port 3(wlan1) entered forwarding state
Sat Apr 18 03:15:09 2020 daemon.err hostapd: Using interface wlan0 with hwaddr 64:70:02:d1:67:61 and ssid "WDR2i4"
Sat Apr 18 03:15:09 2020 daemon.err hostapd: Using interface wlan1 with hwaddr 64:70:02:d1:67:62 and ssid "wdr-5"
Sat Apr 18 03:15:09 2020 kern.info kernel: [24423.914647] br-lan: port 3(wlan1) entered disabled state
Sat Apr 18 03:15:10 2020 kern.info kernel: [24424.774912] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sat Apr 18 03:15:10 2020 kern.info kernel: [24424.783333] br-lan: port 2(wlan0) entered blocking state
Sat Apr 18 03:15:10 2020 kern.info kernel: [24424.788847] br-lan: port 2(wlan0) entered forwarding state
Sat Apr 18 03:15:10 2020 kern.info kernel: [24424.859800] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Sat Apr 18 03:15:10 2020 kern.info kernel: [24424.869246] br-lan: port 3(wlan1) entered blocking state
Sat Apr 18 03:15:10 2020 kern.info kernel: [24424.874760] br-lan: port 3(wlan1) entered forwarding state
Sat Apr 18 03:15:10 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:15:10 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Sat Apr 18 03:15:10 2020 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->ENABLED
Sat Apr 18 03:15:10 2020 daemon.notice hostapd: wlan1: AP-ENABLED
Sat Apr 18 03:15:11 2020 daemon.notice netifd: Network device 'wlan0' link is up
Sat Apr 18 03:15:11 2020 daemon.notice netifd: Network device 'wlan1' link is up

11 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,290

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

Tak, u ciebie jest tak jak by się radio wyłączyło i włączyło ponowie.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

12 Odpowiedź przez arek1194

  • Zarejestrowany: 2012-11-22
  • Posty: 351

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

Cezary napisał/a:

Tak, u ciebie jest tak jak by się radio wyłączyło i włączyło ponowie.

Bo tak jest własnie, wyłącza się i włącza ponownie. Kiedyś też mi się tak coś robiło, doszedłem do wniosku że może extroot mi się wysypał jak wyłączałem nagle bez sync. Przywróciłem wcześniej zrobioną kopię i działało dobrze (tylko teraz nie wiem czy to przypadek) bo teraz wyłącza się sieć, chociaż na extroota uważam i go już tak nie wyłączam itp (pozatym to  też świeżo przywrócona kopia)
Czy może być to spowodowane jakimiś błędami extroota ?  Jeśli nie - to jakieś sugestie że raz wcale a nieraz często.

13 Odpowiedź przez gruniu

  • gruniu
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2015-05-22
  • Posty: 279

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

Mr3420 V1 nie ma problemu. W archer c7 v2eu 5Ghz, tez problemu nie ma.

14 Odpowiedź przez gruniu (edytowany przez gruniu 2020-04-19 11:55:40)

  • gruniu
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2015-05-22
  • Posty: 279

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

czy  chaos_calmer jest pod c7v2 eu?
http://dl.eko.one.pl/gargoyle-pl/chaos_calmer/ar71xx/

15 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,290

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

Nie ma. W tamtych czasach jeszcze nie było podziału.

I dlaczego niby chciałbyś wgrywać coś co jest martwe od wielu lat? I nie mów że przez sterowniki wifi, 5 lat temu one nie były "lepsze".

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

16 Odpowiedź przez ambrozy5

  • Zarejestrowany: 2015-01-27
  • Posty: 2,437

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

a dlaczego nie wgrasz ofw i nie pogonisz? nie szkoda Ci czasu ?

Dom : router https://i.imgur.com/IuB6Zwy.png | TP-LINK T1700G-28TQ |Zyxel XGS-1210-12 | 6x Ruckus r310 unleashed  + Ruckus icx7150-c12p | Truenas scale 124TB 25Gb| Xpenology 12TB | apc smart ups 750 lcd smile 100Mb/s - 25Gb/s
Podróżne : GL.Inet MT3000  +1TB hdd
Działka : rb260gs 1j wdm 1Gb+ ruckus r310 + nb m5 + kilka kamer ip  + panel 285Wp + lifepo4 12v 60Ah .

17 Odpowiedź przez gruniu

  • gruniu
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2015-05-22
  • Posty: 279

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

nie po to kupuowalem, zeby teraz sprzedac
poki co wgrywam rozna softy
i testuje
od momentu wgrania gargoyle-1.12.0.1-ar71xx-generic-archer-c7-v2-squashfs-factory-eu, mialem kilka restartow 2.4Ghz. Dwa razy musialem recznie router zrestartowac.

18 Odpowiedź przez gruniu

  • gruniu
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2015-05-22
  • Posty: 279

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

Niestety pod chaos_calmer, tez w/w objaw wystepuje.
Teraz wgralem oryginalne fw. Potestuje i odpisze.

19 Odpowiedź przez Jan89

  • Jan89
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2018-02-10
  • Posty: 30

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

Może próba z innym zasilaczem?

router1: Igel H820C + HP NC365 (openSUSE Linux) + Cisco AIR-AP4800-K-K9
router2: Igel H820C + HP NC365 (Alpine Linux) + Cisco AIR-AP4800-K-K9

20 Odpowiedź przez gruniu

  • gruniu
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2015-05-22
  • Posty: 279

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

Robie rozne instalacje, ale o zasilaczu nie pomyslalem - faktycznie sprobuje.
Poki co jade na oryginalnym fw i problemow nie zauwazylem.
Ale po wgraniu kolejnych openwrt, tez problemow nie bylo przez jakis czas.

21 Odpowiedź przez gruniu

  • gruniu
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2015-05-22
  • Posty: 279

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

Czy wasz routery i zasilacz, grzeje się?
Wczoraj podmienialem zasilacz i zauważyłem, że i jedno i drugie jest ciepłe.

22 Odpowiedź przez gruniu

  • gruniu
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2015-05-22
  • Posty: 279

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

Obecnie podłączony jest zasilacz 16A.
Póki co, od czterech dni nie zauważyłem problemów.
Może oryginalny zasilacz 2A jest za słaby?
Za jakiś czas opiszę moje testy.

23 Odpowiedź przez palibrzuch

  • Skąd: Wwa
  • Zarejestrowany: 2019-12-22
  • Posty: 614

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

16A?
Skąd Ty taki zasilacz wziąłeś? Większy od routera smile

Jak producent przewidział 2A to nie sądzę, że większy jest potrzebny. Może ten co miałeś nie dawał już tyle mocy? Myślę, że max 3A można dać, choć jak nawet dasz 16A to przecież więcej niż potrzebuje nie weźmie.

24 Odpowiedź przez gruniu (edytowany przez gruniu 2020-05-26 12:56:42)

  • gruniu
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2015-05-22
  • Posty: 279

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

16A to mój zasilacz rezerwowy do ledow, w całym domu.
Obecnie zamówiłem 3A i czekam na przesyłkę.
------------
Juz podlaczony jest 3A. Problemow nie widze.  smile

25 Odpowiedź przez gruniu

  • gruniu
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2015-05-22
  • Posty: 279

Odp: TP-Link Archer C7 v2 - wiecznie jakiś problem

No i pochwaliłem dzień, przed zachodem słońca.
W domu mam urządzenia Broadlink, które współpracują z wifi. Mają świecące kontrolki. I zauważyłem, że kontrolki od czasu do czasu migają. Czyli tracą połączenie 2.4Ghz.
Wczoraj router wyłączył 2.4Ghz. Pomógł restart.