• Zarejestrowany: 2010-02-18
  • Posty: 99

Temat: restart TL-WR1043ND przy wstawaniu wan

Ustawiłem zapis logu do pliku.

12:02:45  to moment w którym podpinam patch cord od wan'u do sieci.
12:02:46 to ostatni komunikat przed restartem


co się dzieje ?
ntpclient wywala system?



root@pierwsza:/tmp/usb_mount/42261be3-b29a-47bd-90c1-3d8d19814853# vi log
Jun  2 12:00:03 kernel: EXT4-fs (sda1): mounted filesystem with ordered data mod
Jun  2 12:00:04 sysinit: Loading forwarding
Jun  2 12:00:04 sysinit: Loading redirects
Jun  2 12:00:04 sysinit: Loading rules
Jun  2 12:00:04 sysinit: Loading includes
Jun  2 12:00:04 sysinit: sh: missing ]
Jun  2 12:00:05 sysinit: Loading zone defaults
Jun  2 12:00:06 root: adding lan (br-lan) to firewall zone lan
Jun  2 12:00:06 root: adding hotspot (br-hotspot) to firewall zone hotspot
Jun  2 12:00:07 crond[1897]: crond (busybox 1.15.3) started, log level 5
Jun  2 12:00:07 dropbear[1905]: Running in background
Jun  2 12:00:07 httpd_gargoyle[1936]: socket :: - Address family not supported b
Jun  2 12:00:07 httpd_gargoyle[1936]: unknown sockaddr family on listen socket -
Jun  2 12:00:08 httpd_gargoyle[1942]: started as root without requesting chroot(
Jun  2 12:00:08 httpd_gargoyle[1942]: httpd_gargoyle/1.0 14mar2008 starting on p
Jun  2 12:00:09 dnsmasq: DNS rebinding protection is active, will discard upstre
Jun  2 12:00:09 dnsmasq: Allowing 127.0.0.0/8 responses
Jun  2 12:00:13 dnsmasq[2031]: started, version 2.55 cachesize 150
Jun  2 12:00:13 dnsmasq[2031]: compile time options: IPv6 GNU-getopt no-DBus no-
Jun  2 12:00:13 dnsmasq-dhcp[2031]: DHCP, IP range 192.168.100.150 -- 192.168.10
Jun  2 12:00:13 dnsmasq[2031]: using local addresses only for domain lan
Jun  2 12:00:13 dnsmasq[2031]: reading /tmp/resolv.conf.auto
Jun  2 12:00:13 dnsmasq[2031]: ignoring nameserver 192.168.100.1 - local interfa
- log 1/172 0%
Jun  2 12:00:19 openvpn(myvpn)[2158]: TLS-Auth MTU parms [ L:1574 D:166 EF:66 EB:0 ET:0 EL:0 ]
Jun  2 12:00:19 openvpn(myvpn)[2158]: Socket Buffers: R=[114688->131072] S=[114688->131072]
Jun  2 12:00:19 openvpn(myvpn)[2158]: TCP/UDP: Socket bind failed on local address [undef]:1194: Address already in use
Jun  2 12:00:19 openvpn(myvpn)[2158]: Exiting
Jun  2 12:00:19 kernel: ar71xx-wdt: enabling watchdog timer
Jun  2 12:00:34 hostapd: wlan0: STA 00:22:fb:c2:4b:aa IEEE 802.11: authenticated
Jun  2 12:00:34 hostapd: wlan0: STA 00:22:fb:c2:4b:aa IEEE 802.11: associated (aid 1)
Jun  2 12:00:34 hostapd: wlan0: STA 00:22:fb:c2:4b:aa WPA: pairwise key handshake completed (RSN)
Jun  2 12:00:34 dnsmasq-dhcp[2031]: DHCPREQUEST(br-lan) 192.168.100.103 00:22:fb:c2:4b:aa
Jun  2 12:00:34 dnsmasq-dhcp[2031]: DHCPACK(br-lan) 192.168.100.103 00:22:fb:c2:4b:aa pstojak
Jun  2 12:00:39 dnsmasq-dhcp[2031]: DHCPINFORM(br-lan) 192.168.100.103 00:22:fb:c2:4b:aa
Jun  2 12:00:39 dnsmasq-dhcp[2031]: DHCPACK(br-lan) 192.168.100.103 00:22:fb:c2:4b:aa Stoju-PC
Jun  2 12:01:01 crond[2097]: USER root pid 2207 cmd /usr/bin/set_kernel_timezone >/dev/null 2>&1
Jun  2 12:01:04 dropbear[2209]: Child connection from 192.168.100.103:65466
Jun  2 12:01:12 dropbear[2209]: password auth succeeded for 'root' from 192.168.100.103:65466
Jun  2 12:02:45 root: adding wan (eth0.2) to firewall zone wan
Jun  2 12:02:45 upnp: adding wan (eth0.2 - 192.168.5.100) to firewall
Jun  2 12:02:46 dnsmasq[2031]: reading /tmp/resolv.conf.auto
Jun  2 12:02:46 dnsmasq[2031]: using nameserver 192.168.5.1#53
Jun  2 12:02:46 dnsmasq[2031]: ignoring nameserver 192.168.100.1 - local interface
Jun  2 12:02:46 dnsmasq[2031]: using local addresses only for domain lan
Jun  2 12:02:46 root: starting ntpclient
Jun 15 23:13:27 crond[2476]: crond (busybox 1.15.3) started, log level 5
Jun 15 23:13:29 hostapd: wlan0: STA 00:22:fb:c2:4b:aa IEEE 802.11: deauthenticated due to local deauth request
Jun 15 23:13:29 hostapd: wlan0: STA 00:22:fb:c2:4b:aa IEEE 802.11: authenticated
Jun 15 23:13:29 hostapd: wlan0: STA 00:22:fb:c2:4b:aa IEEE 802.11: associated (aid 1)
Jun 15 23:13:29 hostapd: wlan0: STA 00:22:fb:c2:4b:aa WPA: pairwise key handshake completed (RSN)
Jun  2 12:00:05 sysinit: Loading zone defaults
Jun  2 12:00:06 root: adding lan (br-lan) to firewall zone lan
Jun  2 12:00:06 root: adding hotspot (br-hotspot) to firewall zone hotspot
Jun  2 12:00:07 crond[1897]: crond (busybox 1.15.3) started, log level 5
Jun  2 12:00:07 dropbear[1909]: Running in background
Jun  2 12:00:08 httpd_gargoyle[1936]: socket :: - Address family not supported by protocol
Jun  2 12:00:08 httpd_gargoyle[1936]: unknown sockaddr family on listen socket - 0
Jun  2 12:00:08 httpd_gargoyle[1943]: started as root without requesting chroot(), warning only
Jun  2 12:00:08 httpd_gargoyle[1943]: httpd_gargoyle/1.0 14mar2008 starting on pierwsza, port 80
Jun  2 12:00:09 dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Jun  2 12:00:09 dnsmasq: Allowing 127.0.0.0/8 responses
Jun  2 12:00:13 dnsmasq[2032]: started, version 2.55 cachesize 150
Jun  2 12:00:13 dnsmasq[2032]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Jun  2 12:00:13 dnsmasq-dhcp[2032]: DHCP, IP range 192.168.100.150 -- 192.168.100.200, lease time 12h
Jun  2 12:00:13 dnsmasq[2032]: using local addresses only for domain lan
Jun  2 12:00:13 dnsmasq[2032]: reading /tmp/resolv.conf.auto
Jun  2 12:00:13 dnsmasq[2032]: ignoring nameserver 192.168.100.1 - local interface
Jun  2 12:00:13 dnsmasq[2032]: using local addresses only for domain lan
- log 94/172 54%

TL-WR1043ND + Gargoyle PL || WRT54GL

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,891

Odp: restart TL-WR1043ND przy wstawaniu wan

Nie, i to zaledwie połwa logu przecież.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez micolajevicz

  • Zarejestrowany: 2010-02-18
  • Posty: 99

Odp: restart TL-WR1043ND przy wstawaniu wan

nie rozumiem? jak połowa?

ustawiłem log level na 0

I masz rację wywala się przy

Jun 15 23:30:55 hostapd: wlan0: STA 00:22:fb:c2:4b:aa WPA: pairwise key handshake completed (RSN)

Jun  2 12:00:03 kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode
Jun  2 12:00:04 sysinit: Loading forwarding
Jun  2 12:00:04 sysinit: Loading redirects
Jun  2 12:00:04 sysinit: Loading rules
Jun  2 12:00:04 sysinit: Loading includes
Jun  2 12:00:04 sysinit: sh: missing ]
Jun  2 12:00:05 sysinit: Loading zone defaults
Jun  2 12:00:06 root: adding lan (br-lan) to firewall zone lan
Jun  2 12:00:06 root: adding hotspot (br-hotspot) to firewall zone hotspot
Jun  2 12:00:07 crond[1898]: crond (busybox 1.15.3) started, log level 0
Jun  2 12:00:07 dropbear[1906]: Running in background
Jun  2 12:00:07 httpd_gargoyle[1937]: socket :: - Address family not supported by protocol
Jun  2 12:00:07 httpd_gargoyle[1937]: unknown sockaddr family on listen socket - 0
Jun  2 12:00:08 httpd_gargoyle[1943]: started as root without requesting chroot(), warning only
Jun  2 12:00:08 httpd_gargoyle[1943]: httpd_gargoyle/1.0 14mar2008 starting on pierwsza, port 80
Jun  2 12:00:09 dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Jun  2 12:00:09 dnsmasq: Allowing 127.0.0.0/8 responses
Jun  2 12:00:13 dnsmasq[2032]: started, version 2.55 cachesize 150
Jun  2 12:00:13 dnsmasq[2032]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Jun  2 12:00:13 dnsmasq-dhcp[2032]: DHCP, IP range 192.168.100.150 -- 192.168.100.200, lease time 12h
Jun  2 12:00:13 dnsmasq[2032]: using local addresses only for domain lan
Jun  2 12:00:13 dnsmasq[2032]: reading /tmp/resolv.conf.auto
Jun  2 12:00:13 dnsmasq[2032]: ignoring nameserver 192.168.100.1 - local interface
Jun  2 12:00:13 dnsmasq[2032]: using local addresses only for domain lan
Jun  2 12:00:13 dnsmasq[2032]: read /etc/hosts - 11 addresses
Jun  2 12:00:13 dnsmasq-dhcp[2032]: read /etc/ethers - 7 addresses
Jun  2 12:00:13 exportfs[2048]: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Jun  2 12:00:13 sysinit: exportfs: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Jun  2 12:00:13 exportfs[2048]: can't lock /var/lib/nfs/etab for writing
Jun  2 12:00:13 sysinit: exportfs: can't lock /var/lib/nfs/etab for writing
Jun  2 12:00:16 crond[2098]: crond (busybox 1.15.3) started, log level 0
Jun  2 12:00:18 sysinit: Thu Jun  2 12:00:18 2011 TUN/TAP device tap0 opened
Jun  2 12:00:18 sysinit: Thu Jun  2 12:00:18 2011 Persist state set to: ON
Jun  2 12:00:18 kernel: device tap0 entered promiscuous mode
Jun  2 12:00:18 kernel: br-lan: port 3(tap0) entering forwarding state
Jun  2 12:00:18 openvpn[2121]: OpenVPN 2.1.3 mips-openwrt-linux [SSL] [LZO2] built on Oct 28 2010
Jun  2 12:00:18 openvpn[2121]: WARNING: using --duplicate-cn and --client-config-dir together is probably not what you want
Jun  2 12:00:18 openvpn[2121]: NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Jun  2 12:00:18 openvpn[2121]: Diffie-Hellman initialized with 1024 bit key
Jun  2 12:00:18 openvpn[2121]: WARNING: file 'keys/server.key' is group or others accessible
Jun  2 12:00:18 openvpn[2121]: WARNING: file 'keys/ta.key' is group or others accessible
Jun  2 12:00:18 openvpn[2121]: Control Channel Authentication: using 'keys/ta.key' as a OpenVPN static key file
Jun  2 12:00:18 openvpn[2121]: Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Jun  2 12:00:18 openvpn[2121]: Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Jun  2 12:00:18 openvpn[2121]: TLS-Auth MTU parms [ L:1574 D:166 EF:66 EB:0 ET:0 EL:0 ]
Jun  2 12:00:18 openvpn[2121]: Socket Buffers: R=[114688->131072] S=[114688->131072]
Jun  2 12:00:18 openvpn[2121]: TUN/TAP device tap0 opened
Jun  2 12:00:18 openvpn[2121]: TUN/TAP TX queue length set to 100
Jun  2 12:00:18 openvpn[2121]: Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ]
Jun  2 10:00:18 openvpn[2132]: chroot to 'chroot' and cd to '/' succeeded
Jun  2 10:00:18 openvpn[2132]: GID set to nogroup
Jun  2 10:00:18 openvpn[2132]: UID set to nobody
Jun  2 10:00:18 openvpn[2132]: UDPv4 link local (bound): [undef]:1194
Jun  2 10:00:18 openvpn[2132]: UDPv4 link remote: [undef]
Jun  2 10:00:18 openvpn[2132]: MULTI: multi_init called, r=256 v=256
Jun  2 10:00:18 openvpn[2132]: Initialization Sequence Completed
Jun  2 12:00:19 miniupnpd[2155]: HTTP listening on port 5000
Jun  2 12:00:19 openvpn(myvpn)[2159]: OpenVPN 2.1.3 mips-openwrt-linux [SSL] [LZO2] built on Oct 28 2010
Jun  2 12:00:19 openvpn(myvpn)[2159]: WARNING: using --duplicate-cn and --client-config-dir together is probably not what you want
Jun  2 12:00:19 openvpn(myvpn)[2159]: NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Jun  2 12:00:19 sysinit: setting up led WLAN
Jun  2 12:00:19 sysinit: setting up led tl-wr1043nd:green:qss
Jun  2 12:00:19 openvpn(myvpn)[2159]: Diffie-Hellman initialized with 1024 bit key
Jun  2 12:00:19 openvpn(myvpn)[2159]: WARNING: file 'keys/server.key' is group or others accessible
Jun  2 12:00:19 openvpn(myvpn)[2159]: WARNING: file 'keys/ta.key' is group or others accessible
Jun  2 12:00:19 openvpn(myvpn)[2159]: Control Channel Authentication: using 'keys/ta.key' as a OpenVPN static key file
Jun  2 12:00:19 openvpn(myvpn)[2159]: Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Jun  2 12:00:19 openvpn(myvpn)[2159]: Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Jun  2 12:00:19 openvpn(myvpn)[2159]: TLS-Auth MTU parms [ L:1574 D:166 EF:66 EB:0 ET:0 EL:0 ]
Jun  2 12:00:19 openvpn(myvpn)[2159]: Socket Buffers: R=[114688->131072] S=[114688->131072]
Jun  2 12:00:19 openvpn(myvpn)[2159]: TCP/UDP: Socket bind failed on local address [undef]:1194: Address already in use
Jun  2 12:00:19 openvpn(myvpn)[2159]: Exiting
Jun  2 12:00:19 kernel: ar71xx-wdt: enabling watchdog timer
Jun  2 12:00:44 hostapd: wlan0: STA 00:22:fb:c2:4b:aa IEEE 802.11: authenticated
Jun  2 12:00:44 hostapd: wlan0: STA 00:22:fb:c2:4b:aa IEEE 802.11: associated (aid 1)
Jun  2 12:00:44 hostapd: wlan0: STA 00:22:fb:c2:4b:aa WPA: pairwise key handshake completed (RSN)
Jun  2 12:00:45 dnsmasq-dhcp[2032]: DHCPREQUEST(br-lan) 192.168.100.103 00:22:fb:c2:4b:aa
Jun  2 12:00:45 dnsmasq-dhcp[2032]: DHCPACK(br-lan) 192.168.100.103 00:22:fb:c2:4b:aa pstojak
Jun  2 12:00:48 dnsmasq-dhcp[2032]: DHCPINFORM(br-lan) 192.168.100.103 00:22:fb:c2:4b:aa
Jun  2 12:00:48 dnsmasq-dhcp[2032]: DHCPACK(br-lan) 192.168.100.103 00:22:fb:c2:4b:aa Stoju-PC
Jun  2 12:00:57 dropbear[2208]: Child connection from 192.168.100.103:49432
Jun  2 12:01:01 crond[2098]: USER root pid 2209 cmd /usr/bin/set_kernel_timezone >/dev/null 2>&1
Jun  2 12:01:02 dropbear[2208]: password auth succeeded for 'root' from 192.168.100.103:49432
Jun  2 12:02:06 root: adding wan (eth0.2) to firewall zone wan
Jun  2 12:02:06 upnp: adding wan (eth0.2 - 192.168.5.100) to firewall
Jun  2 12:02:06 dnsmasq[2032]: reading /tmp/resolv.conf.auto
Jun  2 12:02:06 dnsmasq[2032]: using nameserver 192.168.5.1#53
Jun  2 12:02:06 dnsmasq[2032]: ignoring nameserver 192.168.100.1 - local interface
Jun  2 12:02:06 dnsmasq[2032]: using local addresses only for domain lan
Jun  2 12:02:06 root: starting ntpclient
Jun 15 23:30:53 crond[2473]: crond (busybox 1.15.3) started, log level 0
Jun 15 23:30:55 hostapd: wlan0: STA 00:22:fb:c2:4b:aa IEEE 802.11: deauthenticated due to local deauth request
Jun 15 23:30:55 hostapd: wlan0: STA 00:22:fb:c2:4b:aa IEEE 802.11: authenticated
Jun 15 23:30:55 hostapd: wlan0: STA 00:22:fb:c2:4b:aa IEEE 802.11: associated (aid 1)
Jun 15 23:30:55 hostapd: wlan0: STA 00:22:fb:c2:4b:aa WPA: pairwise key handshake completed (RSN)
Jun  2 12:00:05 sysinit: Loading zone defaults
Jun  2 12:00:06 root: adding lan (br-lan) to firewall zone lan
Jun  2 12:00:06 root: adding hotspot (br-hotspot) to firewall zone hotspot
Jun  2 12:00:07 crond[1897]: crond (busybox 1.15.3) started, log level 0
Jun  2 12:00:07 dropbear[1908]: Running in background
Jun  2 12:00:08 httpd_gargoyle[1936]: socket :: - Address family not supported by protocol
Jun  2 12:00:08 httpd_gargoyle[1936]: unknown sockaddr family on listen socket - 0
Jun  2 12:00:08 httpd_gargoyle[1944]: started as root without requesting chroot(), warning only
Jun  2 12:00:08 httpd_gargoyle[1944]: httpd_gargoyle/1.0 14mar2008 starting on pierwsza, port 80
Jun  2 12:00:09 dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Jun  2 12:00:09 dnsmasq: Allowing 127.0.0.0/8 responses
Jun  2 12:00:13 dnsmasq[2031]: started, version 2.55 cachesize 150
Jun  2 12:00:13 dnsmasq[2031]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Jun  2 12:00:13 dnsmasq-dhcp[2031]: DHCP, IP range 192.168.100.150 -- 192.168.100.200, lease time 12h
Jun  2 12:00:13 dnsmasq[2031]: using local addresses only for domain lan
Jun  2 12:00:13 dnsmasq[2031]: reading /tmp/resolv.conf.auto
Jun  2 12:00:13 dnsmasq[2031]: ignoring nameserver 192.168.100.1 - local interface
Jun  2 12:00:13 dnsmasq[2031]: using local addresses only for domain lan
Jun  2 12:00:13 dnsmasq[2031]: read /etc/hosts - 11 addresses
Jun  2 12:00:13 dnsmasq-dhcp[2031]: read /etc/ethers - 7 addresses
Jun  2 12:00:13 exportfs[2047]: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Jun  2 12:00:13 sysinit: exportfs: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Jun  2 12:00:13 exportfs[2047]: can't lock /var/lib/nfs/etab for writing
Jun  2 12:00:13 sysinit: exportfs: can't lock /var/lib/nfs/etab for writing
Jun  2 12:00:16 crond[2097]: crond (busybox 1.15.3) started, log level 0
Jun  2 12:00:18 sysinit: Thu Jun  2 12:00:18 2011 TUN/TAP device tap0 opened
Jun  2 12:00:18 sysinit: Thu Jun  2 12:00:18 2011 Persist state set to: ON
Jun  2 12:00:18 kernel: device tap0 entered promiscuous mode
Jun  2 12:00:18 kernel: br-lan: port 3(tap0) entering forwarding state
Jun  2 12:00:18 openvpn[2119]: OpenVPN 2.1.3 mips-openwrt-linux [SSL] [LZO2] built on Oct 28 2010
Jun  2 12:00:18 openvpn[2119]: WARNING: using --duplicate-cn and --client-config-dir together is probably not what you want
Jun  2 12:00:18 openvpn[2119]: NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Jun  2 12:00:18 openvpn[2119]: Diffie-Hellman initialized with 1024 bit key
Jun  2 12:00:18 openvpn[2119]: WARNING: file 'keys/server.key' is group or others accessible
Jun  2 12:00:18 openvpn[2119]: WARNING: file 'keys/ta.key' is group or others accessible
Jun  2 12:00:18 openvpn[2119]: Control Channel Authentication: using 'keys/ta.key' as a OpenVPN static key file
Jun  2 12:00:18 openvpn[2119]: Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Jun  2 12:00:18 openvpn[2119]: Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Jun  2 12:00:18 openvpn[2119]: TLS-Auth MTU parms [ L:1574 D:166 EF:66 EB:0 ET:0 EL:0 ]
Jun  2 12:00:18 openvpn[2119]: Socket Buffers: R=[114688->131072] S=[114688->131072]
Jun  2 12:00:18 openvpn[2119]: TUN/TAP device tap0 opened
Jun  2 12:00:18 openvpn[2119]: TUN/TAP TX queue length set to 100
Jun  2 12:00:18 openvpn[2119]: Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ]
Jun  2 10:00:18 openvpn[2131]: chroot to 'chroot' and cd to '/' succeeded
Jun  2 10:00:18 openvpn[2131]: GID set to nogroup
Jun  2 10:00:18 openvpn[2131]: UID set to nobody
Jun  2 10:00:18 openvpn[2131]: UDPv4 link local (bound): [undef]:1194
Jun  2 10:00:18 openvpn[2131]: UDPv4 link remote: [undef]
Jun  2 10:00:18 openvpn[2131]: MULTI: multi_init called, r=256 v=256
Jun  2 10:00:18 openvpn[2131]: Initialization Sequence Completed
Jun  2 12:00:19 miniupnpd[2154]: HTTP listening on port 5000
Jun  2 12:00:19 openvpn(myvpn)[2158]: OpenVPN 2.1.3 mips-openwrt-linux [SSL] [LZO2] built on Oct 28 2010
Jun  2 12:00:19 openvpn(myvpn)[2158]: WARNING: using --duplicate-cn and --client-config-dir together is probably not what you want
Jun  2 12:00:19 openvpn(myvpn)[2158]: NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Jun  2 12:00:19 sysinit: setting up led WLAN
Jun  2 12:00:19 sysinit: setting up led tl-wr1043nd:green:qss
Jun  2 12:00:19 openvpn(myvpn)[2158]: Diffie-Hellman initialized with 1024 bit key
Jun  2 12:00:19 openvpn(myvpn)[2158]: WARNING: file 'keys/server.key' is group or others accessible
Jun  2 12:00:19 openvpn(myvpn)[2158]: WARNING: file 'keys/ta.key' is group or others accessible
Jun  2 12:00:19 openvpn(myvpn)[2158]: Control Channel Authentication: using 'keys/ta.key' as a OpenVPN static key file
Jun  2 12:00:19 openvpn(myvpn)[2158]: Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Jun  2 12:00:19 openvpn(myvpn)[2158]: Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Jun  2 12:00:19 openvpn(myvpn)[2158]: TLS-Auth MTU parms [ L:1574 D:166 EF:66 EB:0 ET:0 EL:0 ]
Jun  2 12:00:19 openvpn(myvpn)[2158]: Socket Buffers: R=[114688->131072] S=[114688->131072]
Jun  2 12:00:19 openvpn(myvpn)[2158]: TCP/UDP: Socket bind failed on local address [undef]:1194: Address already in use
Jun  2 12:00:19 openvpn(myvpn)[2158]: Exiting
Jun  2 12:00:19 kernel: ar71xx-wdt: enabling watchdog timer
Jun  2 12:00:49 hostapd: wlan0: STA 00:22:fb:c2:4b:aa IEEE 802.11: authenticated
Jun  2 12:00:49 hostapd: wlan0: STA 00:22:fb:c2:4b:aa IEEE 802.11: associated (aid 1)
Jun  2 12:00:49 hostapd: wlan0: STA 00:22:fb:c2:4b:aa WPA: pairwise key handshake completed (RSN)
Jun  2 12:00:49 dnsmasq-dhcp[2031]: DHCPREQUEST(br-lan) 192.168.100.103 00:22:fb:c2:4b:aa
Jun  2 12:00:49 dnsmasq-dhcp[2031]: DHCPACK(br-lan) 192.168.100.103 00:22:fb:c2:4b:aa pstojak
Jun  2 12:00:54 dnsmasq-dhcp[2031]: DHCPINFORM(br-lan) 192.168.100.103 00:22:fb:c2:4b:aa
Jun  2 12:00:54 dnsmasq-dhcp[2031]: DHCPACK(br-lan) 192.168.100.103 00:22:fb:c2:4b:aa Stoju-PC
Jun  2 12:00:58 dropbear[2206]: Child connection from 192.168.100.103:49490
Jun  2 12:01:01 crond[2097]: USER root pid 2208 cmd /usr/bin/set_kernel_timezone >/dev/null 2>&1
Jun  2 12:01:04 dropbear[2206]: password auth succeeded for 'root' from 192.168.100.103:49490
Jun  2 12:02:26 kernel: warning: `smbd' uses 32-bit capabilities (legacy support in use)

TL-WR1043ND + Gargoyle PL || WRT54GL

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,891

Odp: restart TL-WR1043ND przy wstawaniu wan

Przedtem pokazałeś połowę loga. Ty nic nie ma ciekawego. Serial podłącz, wtedy może np. oopsa kernela złapiesz. Teraz to nic syslog nie zdążył złapać i zapisać.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez micolajevicz

  • Zarejestrowany: 2010-02-18
  • Posty: 99

Odp: restart TL-WR1043ND przy wstawaniu wan

log z seriala.
Ostania linia pojawia się pod koniec bootowania systemu. Potem nic. Po wsadzeniu WAN też nic. No i na koniec restart.

Out:   serial
Err:   serial
Net:   ag7100_enet_initialize...
No valid address in Flash. Using fixed address
: cfg1 0xf cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
eth0 up
eth0
Autobooting in 1 seconds## Booting image at bf020000 ...
   Uncompressing Kernel Image ... OK

Starting kernel ...

Linux version 2.6.32.27 (cezary@eko.one.pl) (gcc version 4.3.3 (GCC) ) #8 Wed Feb 9 17:12:09 CET 2011
bootconsole [early0] enabled
CPU revision is: 00019374 (MIPS 24Kc)
Atheros AR9132 rev 2, CPU:400.000 MHz, AHB:200.000 MHz, DDR:400.000 MHz
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00002000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00002000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Kernel command line: rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 board=TL-WR1043ND
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 29288k/32768k available (2123k kernel code, 3480k reserved, 418k data, 152k init, 0k highmem)
SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:56
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
MIPS: machine is TP-LINK TL-WR1043ND
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  Š 2001-2006 Red Hat, Inc.
yaffs Jan 15 2011 16:34:46 Installing.
msgmni has been set to 57
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
Atheros AR71xx SPI Controller driver version 0.2.4
m25p80 spi0.0: s25sl064a (8192 Kbytes)
Searching for RedBoot partition table in spi0.0 at offset 0x7e0000
Searching for RedBoot partition table in spi0.0 at offset 0x7f0000
No RedBoot partition table detected in spi0.0
spi0.0: no WRT160NL signature found
Creating 5 MTD partitions on "spi0.0":
0x000000000000-0x000000020000 : "u-boot"
0x000000020000-0x000000160000 : "kernel"
0x000000160000-0x0000007f0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=550000, len=2A0000
0x000000550000-0x0000007f0000 : "rootfs_data"
0x0000007f0000-0x000000800000 : "art"
0x000000020000-0x0000007f0000 : "firmware"
Realtek RTL8366RB ethernet switch driver version 0.2.3
rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
rtl8366rb: probed
eth0: Atheros AG71xx at 0xb9000000, irq 4
Atheros AR71xx hardware watchdog driver version 0.1.0
TCP westwood registered
NET: Registered protocol family 17
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 152k freed
Please be patient, while OpenWrt loads ...
input: gpio-buttons as /devices/platform/gpio-buttons/input/input0
Button Hotplug driver version 0.3.1
eth0: link up (1000Mbps/Full duplex)
- preinit -
Registered led device: tl-wr1043nd:green:usb
Registered led device: tl-wr1043nd:green:system
Registered led device: tl-wr1043nd:green:qss
Registered led device: tl-wr1043nd:green:wlan
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
switching to jffs2
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay
- init -
eth0: link down

Please press Enter to activate this console. eth0: link up (1000Mbps/Full duplex)
device eth0.1 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.1) entering forwarding state
Compat-wireless backport release: compat-wireless-2011-01-06-3-g8db1608
Backport based on wireless-testing.git master-2011-01-21-2
cfg80211: Calling CRDA to update world regulatory domain
device eth0.3 entered promiscuous mode
br-hotspot: port 1(eth0.3) entering forwarding state
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
cfg80211: World regulatory domain updated:
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ieee80211 phy0: Atheros AR9100 MAC/BB Rev:0 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
cfg80211: Calling CRDA for country: US
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
cfg80211: Regulatory domain changed to country: US
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ar71xx-ehci ar71xx-ehci: Atheros AR91xx built-in EHCI controller
ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
nf_conntrack version 0.5.0 (460 buckets, 1840 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
usb 1-1: new high speed USB device using ar71xx-ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
xt_time: kernel timezone is -0000
        Hooked IMQ after mangle on PREROUTING
        Hooked IMQ after nat on POSTROUTING
IMQ driver loaded successfully.
Ebtables v2.0 registered
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for Sierra USB modem
usbcore: registered new interface driver sierra
sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems
fuse init (API version 7.13)
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
scsi 0:0:0:0: Direct-Access     Generic  Flash Disk       5.00 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 8253440 512-byte logical blocks: (4.22 GB/3.93 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan1 entered promiscuous mode
br-hotspot: port 2(wlan1) entering forwarding state
EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode
EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda1): mounted filesystem with ordered data mode
device tap0 entered promiscuous mode
br-lan: port 3(tap0) entering forwarding state

TL-WR1043ND + Gargoyle PL || WRT54GL

6 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,891

Odp: restart TL-WR1043ND przy wstawaniu wan

Nadal tu nic nie ma. Jak byś klepnął enter to pewnie system by się zglosił, ale nic ciekawego nie ma

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

7 Odpowiedź przez micolajevicz

  • Zarejestrowany: 2010-02-18
  • Posty: 99

Odp: restart TL-WR1043ND przy wstawaniu wan

No zgłosił się.

Co z tym robić? co mogę jeszcze sprawdzić?
Wyłączać po kolei z init.d ?

Drugi raz mi się już coś takiego zdarzyło?
Za pierwszym wgrałem obraz systemu z backupu. Minęły 2 tygodnie i jest to samo neutral

Jan  1 01:00:22 pierwsza user.info kernel: cfg80211:     (5250000 KHz - 5330000                                                                              KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan  1 01:00:22 pierwsza user.info kernel: cfg80211:     (5490000 KHz - 5600000                                                                              KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan  1 01:00:22 pierwsza user.info kernel: cfg80211:     (5650000 KHz - 5710000                                                                              KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan  1 01:00:22 pierwsza user.info kernel: cfg80211:     (5735000 KHz - 5835000                                                                              KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Jan  1 01:00:23 pierwsza user.info kernel: Installing knfsd (copyright (C) 1996                                                                              okir@monad.swb.de).
Jan  1 01:00:23 pierwsza user.info kernel: ip_tables: (C) 2000-2006 Netfilter Co                                                                             re Team
Jan  1 01:00:24 pierwsza user.info kernel: NET: Registered protocol family 24
Jan  1 01:00:24 pierwsza user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Con                                                                             troller (EHCI) Driver
Jan  1 01:00:24 pierwsza user.info kernel: ar71xx-ehci ar71xx-ehci: Atheros AR91                                                                             xx built-in EHCI controller
Jan  1 01:00:24 pierwsza user.info kernel: ar71xx-ehci ar71xx-ehci: new USB bus                                                                              registered, assigned bus number 1
Jan  1 01:00:24 pierwsza user.info kernel: ar71xx-ehci ar71xx-ehci: irq 3, io me                                                                             m 0x1b000000
Jan  1 01:00:24 pierwsza user.info kernel: ar71xx-ehci ar71xx-ehci: USB 2.0 star                                                                             ted, EHCI 1.00
Jan  1 01:00:24 pierwsza user.info kernel: usb usb1: configuration #1 chosen fro                                                                             m 1 choice
Jan  1 01:00:24 pierwsza user.info kernel: hub 1-0:1.0: USB hub found
Jan  1 01:00:24 pierwsza user.info kernel: hub 1-0:1.0: 1 port detected
Jan  1 01:00:24 pierwsza user.warn kernel: nf_conntrack version 0.5.0 (460 bucke                                                                             ts, 1840 max)
Jan  1 01:00:24 pierwsza user.warn kernel: CONFIG_NF_CT_ACCT is deprecated and w                                                                             ill be removed soon. Please use
Jan  1 01:00:24 pierwsza user.warn kernel: nf_conntrack.acct=1 kernel parameter,                                                                              acct=1 nf_conntrack module option or
Jan  1 01:00:24 pierwsza user.warn kernel: sysctl net.netfilter.nf_conntrack_acc                                                                             t=1 to enable it.
Jan  1 01:00:24 pierwsza user.info kernel: usb 1-1: new high speed USB device us                                                                             ing ar71xx-ehci and address 2
Jan  1 01:00:24 pierwsza user.info kernel: usb 1-1: configuration #1 chosen from                                                                              1 choice
Jan  1 01:00:25 pierwsza user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux                                                                             _2.6.32.27_ehci_hcd Product=Atheros_AR91xx_built-in_EHCI_controller Serial=ar71x                                                                             x-ehci
Jan  1 01:00:25 pierwsza user.notice usb-modeswitch: 1-1:1.0: Manufacturer=Gener                                                                             ic Product=Flash_Disk Serial=CCCB1010051830520356181214
Jan  1 01:00:25 pierwsza user.info kernel: xt_time: kernel timezone is -0000
Jan  1 01:00:26 pierwsza user.info kernel:      Hooked IMQ after mangle on PRERO                                                                             UTING
Jan  1 01:00:26 pierwsza user.info kernel:      Hooked IMQ after nat on POSTROUT                                                                             ING
Jan  1 01:00:26 pierwsza user.info kernel: IMQ driver loaded successfully.
Jan  1 01:00:26 pierwsza user.info kernel: Ebtables v2.0 registered
Jan  1 01:00:27 pierwsza user.info kernel: usbcore: registered new interface dri                                                                             ver usbserial
Jan  1 01:00:27 pierwsza user.info kernel: USB Serial support registered for gen                                                                             eric
Jan  1 01:00:27 pierwsza user.info kernel: usbcore: registered new interface dri                                                                             ver usbserial_generic
Jan  1 01:00:27 pierwsza user.info kernel: usbserial: USB Serial Driver core
Jan  1 01:00:27 pierwsza user.info kernel: Initializing USB Mass Storage driver.                                                                             ..
Jan  1 01:00:27 pierwsza user.info kernel: scsi0 : SCSI emulation for USB Mass S                                                                             torage devices
Jan  1 01:00:27 pierwsza user.info kernel: usbcore: registered new interface dri                                                                             ver usb-storage
Jan  1 01:00:27 pierwsza user.info kernel: USB Mass Storage support registered.
Jan  1 01:00:27 pierwsza user.debug kernel: usb-storage: device found at 2
Jan  1 01:00:27 pierwsza user.debug kernel: usb-storage: waiting for device to s                                                                             ettle before scanning
Jan  1 01:00:27 pierwsza user.info kernel: usbcore: registered new interface dri                                                                             ver ums-alauda
Jan  1 01:00:27 pierwsza user.info kernel: usbcore: registered new interface dri                                                                             ver ums-cypress
Jan  1 01:00:27 pierwsza user.info kernel: usbcore: registered new interface dri                                                                             ver ums-datafab
Jan  1 01:00:27 pierwsza user.info kernel: usbcore: registered new interface dri                                                                             ver ums-freecom
Jan  1

TL-WR1043ND + Gargoyle PL || WRT54GL

8 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,891

Odp: restart TL-WR1043ND przy wstawaniu wan

To nie ma nawet informacji że kernel się wywalił, nie ma nic do czego można się przyczepić.

PS. A nie pada Ci zasilacz?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

9 Odpowiedź przez micolajevicz

  • Zarejestrowany: 2010-02-18
  • Posty: 99

Odp: restart TL-WR1043ND przy wstawaniu wan

ale jaja.. wychodzi na to że zasilacz.. sprawdzam na drugim i działa.

TL-WR1043ND + Gargoyle PL || WRT54GL

10 Odpowiedź przez micolajevicz

  • Zarejestrowany: 2010-02-18
  • Posty: 99

Odp: restart TL-WR1043ND przy wstawaniu wan

albo jednak nie hmm

CPU 0 Unable to handle kernel paging request at virtual address ebb60750, epc == 8158b72c, ra == 8158b934
Oops[#1]:
Cpu 0
$ 0   : 00000000 7ff77c84 00000001 00000005
$ 4   : c2285628 00000000 ebb60750 802c28a0
$ 8   : 00003a7f 0000001c 00015180 00000000
$12   : 00000000 00004000 00000007 00000000
$16   : c0a86465 00000004 804e1480 4de58100
$20   : 8047b980 4e0d0e00 4d6e38c0 80444000
$24   : 00000002 80235e00
$28   : 80440000 80441dc8 6b71c750 8158b934
Hi    : 00000000
Lo    : 00003b16
epc   : 8158b72c 0x8158b72c
    Not tainted
ra    : 8158b934 0x8158b934
Status: 1000dc03    KERNEL EXL IE
Cause : 00800008
BadVA : ebb60750
PrId  : 00019374 (MIPS 24Kc)
Modules linked in: fuse sierra option ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda usb_storage usbserial leds_wndr3700_usb ebt_arpnat ebt_redirect ebt_mark ebt_vlan ebt_stp ebt_pkttype ebt_mark_m ebt_limit ebt_among ebt_802_3 ebtable_nat ebtable_filter ebtable_broute ebtables xt_IMQ imq ipt_weburl ipt_webmon ipt_timerange nf_nat_tftp nf_conntrack_tftp nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp xt_iprange xt_HL xt_hl xt_MARK ipt_ECN xt_CLASSIFY xt_time xt_tcpmss xt_statistic xt_mark xt_length ipt_ecn xt_DSCP xt_dscp xt_string xt_layer7 ipt_bandwidth ipt_REDIRECT ipt_NETMAP ipt_MASQUERADE iptable_nat nf_nat xt_CONNMARK xt_recent xt_helper xt_conntrack xt_connmark xt_connbytes xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ehci_hcd sd_mod pppoe pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables nfsd nfs msdos ext2 ext3 jbd tun ppp_async ppp_generic slhc vfat fat lockd sunrpc ext4 jbd2 ath9k ath9k_common ath9k_hw ath nls_utf8 nls_koi8_r nls_iso8859_2 nls_iso8859_15 nls_iso8859_13 nls_iso8859_1 nls_cp866 nls_cp852 nls_cp850 nls_cp775 nls_cp437 nls_cp1251 nls_cp1250 mac80211 usbcore ts_fsm ts_bm ts_kmp scsi_mod nls_base mbcache exportfs crc16 crc_ccitt cfg80211 compat_firmware_class compat arc4 aes_generic deflate ecb cbc leds_gpio button_hotplug gpio_buttons input_polldev input_core
Process bw_set (pid: 2946, threadinfo=80440000, task=81644000, tls=00000000)
Stack : 81a8142c 00000000 804e1510 00000002 80441e20 4dfa4ffb 000400eb 00000032
        00000000 00000032 01010be8 00000000 62646973 74352d64 6f776e6c 6f61642d
        6d6f6e74 682d3132 00000000 00000031 2f757372 2f646174 612f6277 6d6f6e2f
        62000000 00000001 4dfa6c1b 00000000 4d6e38c0 00000000 00000005 00000000
        8158c0f0 00000800 00000002 00000000 00000002 802d71cc 80441ed8 818983c0
        ...
Call Trace:[<8020e820>] 0x8020e820
[<8020e8b0>] 0x8020e8b0
[<8021bc7c>] 0x8021bc7c
[<801dc8a4>] 0x801dc8a4
[<80062544>] 0x80062544


Code: 241e0048  08562e81  afa20078 <8cc30000> 93a20028  104000a3  afa3006c  8cc50004  8e840000
Disabling lock debugging due to kernel taint
Kernel panic - not syncing: Fatal exception in interrupt

TL-WR1043ND + Gargoyle PL || WRT54GL

11 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,891

Odp: restart TL-WR1043ND przy wstawaniu wan

Ramu mu brakuje?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

12 Odpowiedź przez micolajevicz

  • Zarejestrowany: 2010-02-18
  • Posty: 99

Odp: restart TL-WR1043ND przy wstawaniu wan

U-Boot 1.1.4 (Nov 17 2009 - 11:56:26)

AP83 (ar9100) U-boot 0.0.11
DRAM:
sri
32 MB
id read 0x100000ff
flash size 8MB, sector count = 128
Flash:  8 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag7100_enet_initialize...
No valid address in Flash. Using fixed address
: cfg1 0xf cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
eth0 up
eth0
Autobooting in 1 seconds## Booting image at bf020000 ...
   Uncompressing Kernel Image ... OK

Starting kernel ...

Linux version 2.6.32.27 (cezary@eko.one.pl) (gcc version 4.3.3 (GCC) ) #8 Wed Feb 9 17:12:09 CET 2011
bootconsole [early0] enabled
CPU revision is: 00019374 (MIPS 24Kc)
Atheros AR9132 rev 2, CPU:400.000 MHz, AHB:200.000 MHz, DDR:400.000 MHz
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00002000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00002000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Kernel command line: rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 board=TL-WR1043ND
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 29288k/32768k available (2123k kernel code, 3480k reserved, 418k data, 152k init, 0k highmem)
SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:56
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
MIPS: machine is TP-LINK TL-WR1043ND
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  Š 2001-2006 Red Hat, Inc.
yaffs Jan 15 2011 16:34:46 Installing.
msgmni has been set to 57
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
Atheros AR71xx SPI Controller driver version 0.2.4
m25p80 spi0.0: s25sl064a (8192 Kbytes)
Searching for RedBoot partition table in spi0.0 at offset 0x7e0000
Searching for RedBoot partition table in spi0.0 at offset 0x7f0000
No RedBoot partition table detected in spi0.0
spi0.0: no WRT160NL signature found
Creating 5 MTD partitions on "spi0.0":
0x000000000000-0x000000020000 : "u-boot"
0x000000020000-0x000000160000 : "kernel"
0x000000160000-0x0000007f0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=550000, len=2A0000
0x000000550000-0x0000007f0000 : "rootfs_data"
0x0000007f0000-0x000000800000 : "art"
0x000000020000-0x0000007f0000 : "firmware"
Realtek RTL8366RB ethernet switch driver version 0.2.3
rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
rtl8366rb: probed
eth0: Atheros AG71xx at 0xb9000000, irq 4
Atheros AR71xx hardware watchdog driver version 0.1.0
TCP westwood registered
NET: Registered protocol family 17
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 152k freed
Please be patient, while OpenWrt loads ...
input: gpio-buttons as /devices/platform/gpio-buttons/input/input0
Button Hotplug driver version 0.3.1
CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 00000000, ra == 801dc538
Oops[#1]:
Cpu 0
$ 0   : 00000000 00000001 00000000 ffff0000
$ 4   : 81405b00 00008916 7fb61940 7fb61940
$ 8   : 81835080 00008916 800e7ba0 fffffff8
$12   : 0000002e 00000000 00000000 00408a7c
$16   : 81835080 00008916 7fb61940 7fb61940
$20   : 00008916 00460b34 00000000 00000000
$24   : 00000009 2ab18490
$28   : 81a52000 81a53e60 00000100 801dc538
Hi    : 00000369
Lo    : 00001be5
epc   : 00000000 (null)
    Not tainted
ra    : 801dc538 0x801dc538
Status: 1000d003    KERNEL EXL IE
Cause : 10800008
BadVA : 00000000
PrId  : 00019374 (MIPS 24Kc)
Modules linked in: button_hotplug gpio_buttons input_polldev input_core
Process ifconfig (pid: 228, threadinfo=81a52000, task=81853660, tls=00000000)
Stack : 81a53f30 81834948 81853660 80072e34 81835080 fffffff7 7fb61940 800e744c
        00000000 81405c60 81405c88 801dda00 00000005 800e7b4c 00000005 00000005
        81835180 81835180 00000008 801dda94 81835180 00000008 81405c88 8144f180
        81838b00 800daae8 00000004 00000003 00000004 00000004 00000000 00000000
        00000000 81835180 81835080 fffffff7 00000003 7fb61940 00008916 800e7bf0
        ...
Call Trace:[<80072e34>] 0x80072e34
[<800e744c>] 0x800e744c
[<801dda00>] 0x801dda00
[<800e7b4c>] 0x800e7b4c
[<801dda94>] 0x801dda94
[<800daae8>] 0x800daae8
[<800e7bf0>] 0x800e7bf0
[<800cac4c>] 0x800cac4c
[<80062544>] 0x80062544


Code: (Bad address in epc)

Disabling lock debugging due to kernel taint
CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 00000000, ra == 801dda00
Oops[#2]:
Cpu 0
$ 0   : 00000000 80300000 00000000 80284458
$ 4   : 81405b00 81835080 81835080 00000003
$ 8   : 802d03e0 0000d000 00000000 81a56000
$12   : 802dac88 802dacc0 81021bd8 00000005
$16   : 00000000 81405b00 81405b28 8144f100
$20   : 81838b00 00000001 81a53db0 00000000
$24   : 802cf924 800741c0
$28   : 81a52000 81a53be0 00000100 801dda00
Hi    : 00000000
Lo    : ec08ce00
epc   : 00000000 (null)
    Tainted: G      D
ra    : 801dda00 0x801dda00
Status: 1000d003    KERNEL EXL IE
Cause : 10800008
BadVA : 00000000
PrId  : 00019374 (MIPS 24Kc)
Modules linked in: button_hotplug gpio_buttons input_polldev input_core
Process ifconfig (pid: 228, threadinfo=81a52000, task=81853660, tls=00000000)
Stack : 81853660 81853660 81835080 00000000 81835080 81835080 00000008 801dda94
        81838b00 81835080 00000008 81405b28 8144f100 800daa28 81a53c30 8006082c
        00000000 ffffffff 00000000 00000000 00000000 81835080 81a5a3c0 0000000c
        81a5a3c8 800d7190 00000100 80069108 0000000b 00000000 81a5a3c0 00000001
        00000000 8007f490 0000000b 81853660 818e0300 818e0334 0000000b 81853660
        ...
Call Trace:[<801dda94>] 0x801dda94

TL-WR1043ND + Gargoyle PL || WRT54GL