Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Oprogramowanie / Software → WR842 V2 - problem z powrotem do niższej wersji.
Strony 1
Zaloguj się lub zarejestruj by napisać odpowiedź
Cześć wam. Zaaplikowałem ww. routerkowi najnowszą wersję gargoyle. Niestety nie mogę doinstalować ani języka, ani openvpn. Próbuję wrócić do wersji 1.62 (tam wszystko super chodziło) niestety router nie przyjmuje softu. Czy jest inny sposób na reinstalację?
sysupgrade z konsoli, bez zachowania konfiguracji. Opisane w faq na górze tej strony.
Przeczytałem i ok, tylko przy próbie wgrania wywala mi się sesja, a kopiuje wget 54% prawdopodobnie brak miejsca na routerze. Jest na to sposób?
Jest na to jakiś sposób? czy można coś usunąć?
Do /tmp masz kopiować. Nie do /root, i to też jest w faq.
Wiem, właśnie. kopiuję do tmp zgodnie z instrukcją. wget zasuwa do 54% i się wywala. w samym tmp mam sporo rzeczy. Nie wiem czy tak ma być, czy to nie po próbach upgrade przez gui.
Udało mi się skopiować. teraz mam taki kom: root@Gargoyle:~# sysupgrade -n /tmp/a.bin
Image metadata not found
Killed
Więc wyłącz/usuń niepotrzebne rzeczy z /tmp
mogę wszystko usunąć? po restarcie urządzenia ściąga mi jakieś 92%
root@Gargoyle:~# sysupgrade -n /tmp/a.bin
Image metadata not found
Sysupgrade is not yet supported on generic.
Image check 'platform_check_image' failed.
Udało się ściągnąć ale niestety taki mam komunikat.
Co ty wgrałeś poprzednio że widzi "generic" a nie normalną platformę? Zanim cokolwiek zrobisz pokaż wyniki:
cat /tmp/sysinfo/model
cat /tmp/sysinfo/board_name
cat /proc/cpuinfo
dmesg
root@Gargoyle:~# cat /tmp/sysinfo/board_name
tl-wr842n-v2
root@Gargoyle:~# cat /proc/cpuinfo
system type : Atheros AR9341 rev 3
machine : TP-LINK TL-WR842N/ND v2
processor : 0
cpu model : MIPS 74Kc V4.12
BogoMIPS : 266.64
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
isa : mips1 mips2 mips32r1 mips32r2
ASEs implemented : mips16 dsp dsp2
shadow register sets : 1
kscratch registers : 0
package : 0
core : 0
VCED exceptions : not available
VCEI exceptions : not available
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 8128
[ 0.000000] Kernel command line: board=TL-WR842N-v2 console=ttyS0,115200 ro otfstype=squashfs noinitrd
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 27352K/32768K available (3212K kernel code, 171K rwdata, 804K rodata, 284K init, 205K bss, 5416K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:535.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.00 0MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_i dle_ns: 7144898866 ns
[ 0.000011] sched_clock: 32 bits at 267MHz, resolution 3ns, wraps every 80279 76190ns
[ 0.008250] Calibrating delay loop... 266.64 BogoMIPS (lpj=1333248)
[ 0.091063] pid_max: default: 32768 minimum: 301
[ 0.096055] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.103039] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.113743] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns
[ 0.124156] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.131271] NET: Registered protocol family 16
[ 0.137750] MIPS: machine is TP-LINK TL-WR842N/ND v2
[ 0.640173] clocksource: Switched to clocksource MIPS
[ 0.646819] NET: Registered protocol family 2
[ 0.652432] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.659794] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.666563] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.673388] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.679567] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.686508] NET: Registered protocol family 1
[ 0.691189] PCI: CLS 0 bytes, default 32
[ 0.696485] Crashlog allocated RAM at address 0x1f00000
[ 0.703385] workingset: timestamp_bits=30 max_order=13 bucket_order=0
[ 0.717970] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.724171] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT Y) (c) 2001-2006 Red Hat, Inc.
[ 0.745257] io scheduler noop registered
[ 0.749400] io scheduler deadline registered (default)
[ 0.755313] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.762571] console [ttyS0] disabled
[ 0.786468] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 156 2500) is a 16550A
[ 0.795588] console [ttyS0] enabled
[ 0.803147] bootconsole [early0] disabled
[ 0.815986] m25p80 spi0.0: found s25fl064k, expected m25p80
[ 0.834023] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[ 0.839319] 5 tp-link partitions found on MTD device spi0.0
[ 0.845124] Creating 5 MTD partitions on "spi0.0":
[ 0.850084] 0x000000000000-0x000000020000 : "u-boot"
[ 0.857530] 0x000000020000-0x000000178d88 : "kernel"
[ 0.865140] 0x000000178d88-0x0000007f0000 : "rootfs"
[ 0.872165] mtd: device 2 (rootfs) set to be root filesystem
[ 0.878055] 1 squashfs-split partitions found on MTD device rootfs
[ 0.884526] 0x000000700000-0x0000007f0000 : "rootfs_data"
[ 0.892657] 0x0000007f0000-0x000000800000 : "art"
[ 0.899898] 0x000000020000-0x0000007f0000 : "firmware"
[ 0.908858] libphy: Fixed MDIO Bus: probed
[ 0.933052] libphy: ag71xx_mdio: probed
[ 1.562268] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:00 [uid=004dd0 42, driver=Generic PHY]
[ 1.572590] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 2.202061] ag71xx-mdio.1: Found an AR934X built-in switch
[ 2.254505] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 2.263388] NET: Registered protocol family 10
[ 2.272953] NET: Registered protocol family 17
[ 2.277610] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.291195] 8021q: 802.1Q VLAN Support v1.8
[ 2.301964] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 2.311149] Freeing unused kernel memory: 284K
[ 2.315739] This architecture does not have kernel memory protection.
[ 2.550185] random: fast init done
[ 3.120985] init: Console is alive
[ 3.124759] init: - watchdog -
[ 5.928469] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 6.163809] usbcore: registered new interface driver usbfs
[ 6.169603] usbcore: registered new interface driver hub
[ 6.175252] usbcore: registered new device driver usb
[ 6.223590] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.242475] SCSI subsystem initialized
[ 6.253429] ehci-platform: EHCI generic platform driver
[ 6.258975] ehci-platform ehci-platform: EHCI Host Controller
[ 6.264993] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 6.275304] ehci-platform ehci-platform: TX-TX IDP fix enabled
[ 6.281377] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 6.310280] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 6.317810] hub 1-0:1.0: USB hub found
[ 6.322211] hub 1-0:1.0: 1 port detected
[ 6.330607] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.339370] ohci-platform: OHCI generic platform driver
[ 6.364137] usbcore: registered new interface driver usb-storage
[ 6.373454] usbcore: registered new interface driver uas
[ 6.379890] kmodloader: done loading kernel modules from /etc/modules-boot.d/ *
[ 6.397914] init: - preinit -
[ 7.365328] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 7.411251] random: procd: uninitialized urandom read (4 bytes read)
[ 9.001439] eth1: link up (1000Mbps/Full duplex)
[ 9.006245] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 9.711342] mount_root: loading kmods from internal overlay
[ 9.837303] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 9.847147] kmodloader: done loading kernel modules from //etc/modules-boot.d /*
[ 10.553994] jffs2: notice: (433) jffs2_build_xattr_subsystem: complete buildi ng xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 10.570596] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 10.581988] block: extroot: not configured
[ 10.633471] jffs2: notice: (431) jffs2_build_xattr_subsystem: complete buildi ng xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 10.889649] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 10.900968] block: extroot: not configured
[ 10.906462] mount_root: switching to jffs2 overlay
[ 11.038891] urandom-seed: Seeding with /etc/urandom.seed
[ 11.171316] eth1: link down
[ 11.188347] procd: - early -
[ 11.191781] procd: - watchdog -
[ 11.936709] procd: - watchdog -
[ 12.021758] procd: - ubus -
[ 12.126899] random: jshn: uninitialized urandom read (4 bytes read)
[ 12.277596] random: ubusd: uninitialized urandom read (4 bytes read)
[ 12.352400] random: ubusd: uninitialized urandom read (4 bytes read)
[ 12.361541] procd: - init -
[ 13.750528] kmodloader: loading kernel modules from /etc/modules.d/*
[ 13.898077] RPC: Registered named UNIX socket transport module.
[ 13.904264] RPC: Registered udp transport module.
[ 13.909119] RPC: Registered tcp transport module.
[ 13.913993] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.942241] tun: Universal TUN/TAP device driver, 1.6
[ 13.947471] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 13.973933] gre: GRE over IPv4 demultiplexor driver
[ 13.982421] ip_gre: GRE over IPv4 tunneling driver
[ 14.080220] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 14.152388] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.245219] Hooked IMQ after mangle on PREROUTING
[ 14.250273] Hooked IMQ after nat on POSTROUTING
[ 14.255045] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1, imq_ dev_accurate_stats = 1)
[ 14.264492] Hooking IMQ before NAT on PREROUTING.
[ 14.269437] Hooking IMQ after NAT on POSTROUTING.
[ 14.323148] Netfilter messages via NETLINK v0.30.
[ 14.353576] ip_set: protocol 6
[ 14.529349] u32 classifier
[ 14.532215] input device check on
[ 14.535996] Actions configured
[ 14.563290] Mirror/redirect action on
[ 14.703651] fuse init (API version 7.26)
[ 14.740269] Bridge firewalling registered
[ 14.757262] usbcore: registered new interface driver cdc_acm
[ 14.763181] cdc_acm: USB Abstract Control Model driver for USB modems and ISD N adapters
[ 14.803431] usbcore: registered new interface driver cdc_wdm
[ 14.842958] Loading modules backported from Linux version wt-2017-11-01-0-gfe 248fc2c180
[ 14.851298] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 14.937637] Ebtables v2.0 registered
[ 14.948919] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.998011] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[ 15.257495] ctnetlink v0.93: registering with nfnetlink.
[ 15.442461] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[ 15.510937] usbcore: registered new interface driver ums-alauda
[ 15.522139] usbcore: registered new interface driver ums-cypress
[ 15.533558] usbcore: registered new interface driver ums-datafab
[ 15.544421] usbcore: registered new interface driver ums-freecom
[ 15.555642] usbcore: registered new interface driver ums-isd200
[ 15.567163] usbcore: registered new interface driver ums-jumpshot
[ 15.578142] usbcore: registered new interface driver ums-karma
[ 15.590838] usbcore: registered new interface driver ums-sddr09
[ 15.602062] usbcore: registered new interface driver ums-sddr55
[ 15.614085] usbcore: registered new interface driver ums-usbat
[ 15.626187] usbcore: registered new interface driver usblp
[ 15.663473] usbcore: registered new interface driver usbserial
[ 15.669622] usbcore: registered new interface driver usbserial_generic
[ 15.676556] usbserial: USB Serial support registered for generic
[ 15.763083] xt_time: kernel timezone is -0000
[ 15.773671] usbcore: registered new interface driver cdc_ether
[ 15.789102] usbcore: registered new interface driver cdc_ncm
[ 15.862923] usbcore: registered new interface driver huawei_cdc_ncm
[ 15.984573] PPP generic driver version 2.4.2
[ 15.993549] PPP MPPE Compression module registered
[ 16.001886] NET: Registered protocol family 24
[ 16.009382] PPTP driver version 0.8.5
[ 16.019279] usbcore: registered new interface driver qmi_wwan
[ 16.032396] usbcore: registered new interface driver rndis_host
[ 16.045133] usbcore: registered new interface driver sierra
[ 16.051102] usbserial: USB Serial support registered for Sierra USB modem
[ 16.063296] usbcore: registered new interface driver sierra_net
[ 16.332104] usbcore: registered new interface driver cdc_mbim
[ 16.391322] usbcore: registered new interface driver option
[ 16.397208] usbserial: USB Serial support registered for GSM modem (1-port)
[ 16.488948] usbcore: registered new interface driver qcserial
[ 16.495086] usbserial: USB Serial support registered for Qualcomm USB modem
[ 16.533409] ath: EEPROM regdomain: 0x0
[ 16.533419] ath: EEPROM indicates default country code should be used
[ 16.533423] ath: doing EEPROM country->regdmn map search
[ 16.533441] ath: country maps to regdmn code: 0x3a
[ 16.533447] ath: Country alpha2 being used: US
[ 16.533451] ath: Regpair used: 0x3a
[ 16.547266] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 16.552255] ieee80211 phy0: Atheros AR9340 Rev:3 mem=0xb8100000, irq=47
[ 16.611757] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 30.839009] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 30.866899] br-lan: port 1(eth1.1) entered blocking state
[ 30.872560] br-lan: port 1(eth1.1) entered disabled state
[ 30.878596] device eth1.1 entered promiscuous mode
[ 30.883613] device eth1 entered promiscuous mode
[ 30.949971] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 31.006434] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.556664] eth1: link up (1000Mbps/Full duplex)
[ 32.580283] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 32.607566] br-lan: port 1(eth1.1) entered blocking state
[ 32.613226] br-lan: port 1(eth1.1) entered forwarding state
[ 32.657519] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 33.052486] eth0: link up (100Mbps/Full duplex)
[ 33.057217] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 35.845908] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptable s CT target to attach helpers instead.
[ 93.580279] random: crng init done
[ 93.583810] random: 6 urandom warning(s) missed due to ratelimiting
root@Gargoyle:~#
A który plik próbujesz wgrać teraz?
gargoyle-1.6.2.2-ar71xx-tl-wr842nd-v2-squashfs-sysupgrade.bin
oczywiście zrobiłem zmianę nazwy na a.bin
Jeżeli faktycznie to masz to zrob sysupgrade z opcją -F (wymuszenie).
Oto wynik: root@Gargoyle:/tmp# sysupgrade -F /tmp/b.bin
Killed
Chyba się poddam, już nie mam pomysłu.
sysupgrade -n -F /tmp/b.bin
I wcześniej ubij wszystkie inne zbędne procesy żeby nie zawalały ramu.
root@Gargoyle:~# sysupgrade -n -F /tmp/b.bin
Segmentation fault
Killed
Image check 'fwtool_check_image' failed but --force given - will update anyway!
Ubij procesy zbędne...
Nie bardzo wiem jak
Jeszcze mam coś takiego
If the read/write overlay partition is completely full, it is mounted as read-only. Check with "df" that you have free space there. If not, you have to delete something to free space and then reboot.
df zwraca mi:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 5632 5632 0 100% /rom
tmpfs 13816 584 13232 4% /tmp
/dev/mtdblock3 960 892 68 93% /overlay
overlayfs:/overlay 960 892 68 93% /
tmpfs 512 0 512 0% /dev
dodatkowo w katalogu root są jakieś strzępy a.bin o wielkości 600 kb czego nie mogę usunąć ani zmienić mu uprawnień.
Nie da się tego zrobić poprzez tftp?
Na początek - napisz firstboot, zrestartuj.
Później podłącz się, wyłącz sambę, ftp, nfs, uhttpd, dnsmasq (/etc/init.d/samba stop itd). Później przegraj plik do /tmp i zrób aktualizację.
Nie pamiętam już czy v2 miało tftp czy nie. Sprawdź.
Problem jest jak skopiuję plik, bo strasznie zaczyna mulić router i ciągle się rozłącza.
Gdzieś tu na forum jest info, że ta wersja posiada Tftp ale moje próby spełzły na niczym i z 0.66 i 1.66 i wan i lan
Ty nie robisz chyba tego przez wifi?
WR842 ma tryb TFTP Recovery na pewno. Sam robiłem w tej wersji wczoraj.
Strony 1
Zaloguj się lub zarejestruj by napisać odpowiedź
eko.one.pl → Oprogramowanie / Software → WR842 V2 - problem z powrotem do niższej wersji.
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc