FAQ o OpenWrt | Sprzedam różne routery | Oddam

slawekw · 2019-03-16 19:57:17

slawekw
Użytkownik
Nieaktywny

Zarejestrowany: 2015-11-18
Posty: 87

Temat: TL-WR902AC v.3 - brak IP na interfejsie WAN

Witam,
wrzuciłem OpenWrt 18.06.2 na TL-WR902AC v.3 skonfigurowałem 'network' i 'wireless' (ap). Moge sie podpiąć do sieci Wifi jednak na interfejsie WAN rutera nie konfiguruje się IP z DHCP (normalnie jak przepinam ten kabel od WAN do laptopa z konfiguracją auto/auto, IP jest ustawiane i internet działa. Czy to jakiś znany defekt softu dla tego modelu TP czy może moja konfiguracja jest zła?

/etc/config/network

config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config interface 'lan'
        option type 'bridge'
        option ifname 'eth0.1'
        option proto 'static'
        option ipaddr '192.168.171.1'
        option netmask '255.255.255.0'

config device 'wan'
        option name 'eth0.1'
        option proto 'dhcp'
        option peerdns '0'
        option delegate '0'
        option dns '1.1.1.1 9.9.9.9 149.112.112.112 1.0.0.1 8.8.8.8 8.8.4.4'

config switch
        option name 'switch0'
        option reset '1'
        option enable_vlan '1'

config switch_vlan
        option device 'switch0'
        option vlan '1'
        option ports '4 6t'

root@fd2wew:/etc/config# ifup wan
Interface wan not found
root@fd2wew:/etc/config# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN qlen 1000
    link/ether b0:4e:21:3c:4e:5a brd ff:ff:ff:ff:ff:ff
    inet6 fe80::b24e:26ff:feeb:4e5a/64 scope link
       valid_lft forever preferred_lft forever
4: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000
    link/ether b0:4e:21:3c:4e:5a brd ff:ff:ff:ff:ff:ff
    inet 192.168.171.1/24 brd 192.168.171.255 scope global br-lan
       valid_lft forever preferred_lft forever
    inet6 fe80::b24e:26ff:feeb:4e5a/64 scope link
       valid_lft forever preferred_lft forever
5: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
    link/ether b0:4e:22:11:4e:5a brd ff:ff:ff:ff:ff:ff
6: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
    link/ether b0:4e:21:3c:4e:5a brd ff:ff:ff:ff:ff:ff
    inet6 fe80::b24e:26ff:feeb:4e5a/64 scope link
       valid_lft forever preferred_lft forever

Cezary · 2019-03-16 20:10:23

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 116,212

Odp: TL-WR902AC v.3 - brak IP na interfejsie WAN

I czemu się dziwisz jak masz taki sam interfejs na lan i wan? To urządzenie ma tylko jeden ethernet. Więc używasz go jako lan LUB wan, nie oba jednocześnie. W tym przypadku co masz: włącz sobie wifi, podłącz się przez wifi, skasuj option ifname 'eth0.1' z sekcji lan i zrestartuj urządzenie.

EDIT: jeżeli chodzi o ideologię to masz to opisane przy mr3020: http://eko.one.pl/?p=openwrt-mr3020#konfiguracjasieci

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

slawekw · 2019-03-16 21:13:32

slawekw
Użytkownik
Nieaktywny

Zarejestrowany: 2015-11-18
Posty: 87

Odp: TL-WR902AC v.3 - brak IP na interfejsie WAN

Usunąłem tę linię z pliku "/etc/config/network", zrestartowałem router jednak dalej nie pojawia się IP na interfejsie WAN.

jak odpinam kabel i podpinam ponownie tylko takie dwie linie pojawiają się na "logread -f":

Wed Jan 30 15:43:16 2019 kern.info kernel: [  225.160869] rt3050-esw 10110000.esw: link changed 0x00
Wed Jan 30 15:43:20 2019 kern.info kernel: [  229.493801] rt3050-esw 10110000.esw: link changed 0x10

root@fd2wew:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc fq_codel state DOWN qlen 1000
    link/ether b0:4e:21:3c:4e:5a brd ff:ff:ff:ff:ff:ff
4: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000
    link/ether b0:4e:21:3c:4e:5a brd ff:ff:ff:ff:ff:ff
    inet 192.168.171.1/24 brd 192.168.171.255 scope global br-lan
       valid_lft forever preferred_lft forever
    inet6 fe80::b24e:26ff:feeb:4e5a/64 scope link
       valid_lft forever preferred_lft forever
5: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
    link/ether b0:4e:21:3c:4e:5a brd ff:ff:ff:ff:ff:ff
    inet6 fe80::b24e:26ff:feeb:4e5a/64 scope link
       valid_lft forever preferred_lft forever

Cezary · 2019-03-16 21:16:05

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 116,212

Odp: TL-WR902AC v.3 - brak IP na interfejsie WAN

brctl show
ifstatus wan
logread

pokaż

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

slawekw · 2019-03-18 21:46:51

slawekw
Użytkownik
Nieaktywny

Zarejestrowany: 2015-11-18
Posty: 87

Odp: TL-WR902AC v.3 - brak IP na interfejsie WAN

Przepraszam za zwłokę, oto te informacje (nie wszystkie komendy działają):

root@fd2wew:~# brtctl show
-ash: brtctl: not found
root@fd2wew:~# ifstatus wan
Interface wan not found
root@fd2wew:~# ubus -S list "network.interface.wan"
root@fd2wew:~# ubus call network.interface status "{ \"interface\" : \"wan\" }"
Command failed: Not found
root@fd2wew:~#

Jest to 'vanilla' instalacja, bez żadnych dodatkowych paczek (brak internetu / WAN), zainstalowana przez tftp z http://downloads.openwrt.org/releases/1 … covery.bin

fd2wew:~# logread
Mon Mar 18 20:28:06 2019 kern.notice kernel: [    0.000000] Linux version 4.14.95 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7552-2f11a9e)) #0 Mon Jan 28 08:54:32 2019
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] Board has DDR2
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] Analog PMU set to hw control
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] Digital PMU set to hw control
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] MIPS: machine is TP-Link TL-WR902AC v3
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] Determined physical RAM map:
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000]  memory: 04000000 @ 00000000 (usable)
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Mon Mar 18 20:28:06 2019 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Mon Mar 18 20:28:06 2019 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] Zone ranges:
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] Movable zone start for each node
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] Early memory node ranges
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.000000] On node 0 totalpages: 16384
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 80422fc0, node_mem_map 81000040
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.000000]   Normal zone: 128 pages used for memmap
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
Mon Mar 18 20:28:06 2019 kern.notice kernel: [    0.000000] random: get_random_bytes called from 0x8042672c with crng_init=0
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16256
Mon Mar 18 20:28:06 2019 kern.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] Writing ErrCtl register=0000000e
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] Readback ErrCtl register=0000000e
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] Memory: 60248K/65536K available (3592K kernel code, 183K rwdata, 464K rodata, 168K init, 206K bss, 5288K reserved, 0K cma-reserved)
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] NR_IRQS: 256
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] intc: using register map from devicetree
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] CPU Clock: 580MHz
Mon Mar 18 20:28:06 2019 kern.crit kernel: [    0.000000] timer_probe: no matching timers found
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.000012] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.007548] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.073500] pid_max: default: 32768 minimum: 301
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.078202] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.084556] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.097267] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.106758] futex hash table entries: 256 (order: -1, 3072 bytes)
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.112710] pinctrl core: initialized pinctrl subsystem
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.119056] NET: Registered protocol family 16
Mon Mar 18 20:28:06 2019 kern.warn kernel: [    0.127687] Can't analyze schedule() prologue at 8037dd78
Mon Mar 18 20:28:06 2019 kern.err kernel: [    0.233139] mt7620-pci 10140000.pcie: Port 0 N_FTS = 1b105000
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.388427] PCI host bridge /pcie@10140000 ranges:
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.393003]  MEM 0x0000000020000000..0x000000002fffffff
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.398042]   IO 0x0000000010160000..0x000000001016ffff
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.420372] mt7621_gpio 10000600.gpio: registering 32 gpios
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.425956] mt7621_gpio 10000600.gpio: registering 32 gpios
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.431542] mt7621_gpio 10000600.gpio: registering 32 gpios
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.437818] PCI host bridge to bus 0000:00
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.441778] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.448358] pci_bus 0000:00: root bus resource [io  0xffffffff]
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.454081] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.460625] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.468321] pci 0000:00:00.0: [14c3:0801] type 01 class 0x060400
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.468367] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.468385] pci 0000:00:00.0: reg 0x14: [mem 0x20200000-0x2020ffff]
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.468469] pci 0000:00:00.0: supports D1
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.468481] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.468926] pci 0000:01:00.0: [14c3:7650] type 00 class 0x028000
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.468980] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.469127] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.469388] pci 0000:01:00.1: [14c3:8650] type 00 class 0x0d1100
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.469437] pci 0000:01:00.1: reg 0x10: [mem 0x00000000-0x000fffff]
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.469583] pci 0000:01:00.1: supports D1
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.469596] pci 0000:01:00.1: PME# supported from D0 D1 D3hot D3cold
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.469828] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.469848] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.469901] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.476237] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.483009] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff]
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.489510] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.496088] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff]
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.502619] pci 0000:01:00.1: BAR 0: assigned [mem 0x20100000-0x201fffff]
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.509183] pci 0000:00:00.0: PCI bridge to [bus 01]
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.513958] pci 0000:00:00.0:   bridge window [mem 0x20000000-0x201fffff]
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.525409] clocksource: Switched to clocksource MIPS
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.531497] NET: Registered protocol family 2
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.536686] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.543379] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.549563] TCP: Hash tables configured (established 1024 bind 1024)
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.555803] UDP hash table entries: 256 (order: 0, 4096 bytes)
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.561404] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.567737] NET: Registered protocol family 1
Mon Mar 18 20:28:06 2019 kern.debug kernel: [    0.571979] PCI: CLS 0 bytes, default 32
Mon Mar 18 20:28:06 2019 kern.warn kernel: [    0.575365] Crashlog allocated RAM at address 0x3f00000
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.582052] workingset: timestamp_bits=30 max_order=14 bucket_order=0
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.594290] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.599911] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.619856] io scheduler noop registered
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.623590] io scheduler deadline registered (default)
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.629566] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.638521] console [ttyS0] disabled
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.641960] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.650732] console [ttyS0] enabled
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.657722] bootconsole [early0] disabled
Mon Mar 18 20:28:06 2019 kern.err kernel: [    0.666468] cacheinfo: Failed to find cpu0 device node
Mon Mar 18 20:28:06 2019 kern.warn kernel: [    0.671684] cacheinfo: Unable to detect cache hierarchy for CPU 0
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.678647] spi-mt7621 10000b00.spi: sys_freq: 193333333
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.700110] m25p80 spi0.0: s25fl064k (8192 Kbytes)
Mon Mar 18 20:28:06 2019 kern.notice kernel: [    0.705023] 4 fixed-partitions partitions found on MTD device spi0.0
Mon Mar 18 20:28:06 2019 kern.notice kernel: [    0.711481] Creating 4 MTD partitions on "spi0.0":
Mon Mar 18 20:28:06 2019 kern.notice kernel: [    0.716364] 0x000000000000-0x000000020000 : "boot"
Mon Mar 18 20:28:06 2019 kern.notice kernel: [    0.722153] 0x000000020000-0x0000007c0000 : "firmware"
Mon Mar 18 20:28:06 2019 kern.notice kernel: [    0.777890] 2 tplink-fw partitions found on MTD device firmware
Mon Mar 18 20:28:06 2019 kern.notice kernel: [    0.783919] 0x000000020000-0x00000017f3d0 : "kernel"
Mon Mar 18 20:28:06 2019 kern.notice kernel: [    0.789876] 0x00000017f3d0-0x0000007c0000 : "rootfs"
Mon Mar 18 20:28:06 2019 kern.notice kernel: [    0.795737] mtd: device 3 (rootfs) set to be root filesystem
Mon Mar 18 20:28:06 2019 kern.notice kernel: [    0.803037] 1 squashfs-split partitions found on MTD device rootfs
Mon Mar 18 20:28:06 2019 kern.notice kernel: [    0.809384] 0x0000003d0000-0x0000007c0000 : "rootfs_data"
Mon Mar 18 20:28:06 2019 kern.notice kernel: [    0.815849] 0x0000007c0000-0x0000007d0000 : "config"
Mon Mar 18 20:28:06 2019 kern.notice kernel: [    0.821732] 0x0000007d0000-0x000000800000 : "factory"
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.828453] libphy: Fixed MDIO Bus: probed
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.844978] rt3050-esw 10110000.esw: link changed 0x00
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.851833] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.862130] NET: Registered protocol family 10
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.870839] Segment Routing with IPv6
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.874676] NET: Registered protocol family 17
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.879309] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.892464] 8021q: 802.1Q VLAN Support v1.8
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.909048] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Mon Mar 18 20:28:06 2019 kern.info kernel: [    0.917171] Freeing unused kernel memory: 168K
Mon Mar 18 20:28:06 2019 kern.warn kernel: [    0.921676] This architecture does not have kernel memory protection.
Mon Mar 18 20:28:06 2019 user.info kernel: [    2.113446] init: Console is alive
Mon Mar 18 20:28:06 2019 user.info kernel: [    2.117231] init: - watchdog -
Mon Mar 18 20:28:06 2019 kern.notice kernel: [    2.409568] random: fast init done
Mon Mar 18 20:28:06 2019 user.info kernel: [    3.461805] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Mon Mar 18 20:28:06 2019 kern.info kernel: [    3.689608] usbcore: registered new interface driver usbfs
Mon Mar 18 20:28:06 2019 kern.info kernel: [    3.695257] usbcore: registered new interface driver hub
Mon Mar 18 20:28:06 2019 kern.info kernel: [    3.700826] usbcore: registered new device driver usb
Mon Mar 18 20:28:06 2019 kern.info kernel: [    3.711827] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mon Mar 18 20:28:06 2019 kern.info kernel: [    3.720174] ehci-platform: EHCI generic platform driver
Mon Mar 18 20:28:06 2019 kern.info kernel: [    3.735832] phy phy-10120000.usbphy.0: remote usb device wakeup disabled
Mon Mar 18 20:28:06 2019 kern.info kernel: [    3.742637] phy phy-10120000.usbphy.0: UTMI 16bit 30MHz
Mon Mar 18 20:28:06 2019 kern.info kernel: [    3.747960] ehci-platform 101c0000.ehci: EHCI Host Controller
Mon Mar 18 20:28:06 2019 kern.info kernel: [    3.753849] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
Mon Mar 18 20:28:06 2019 kern.info kernel: [    3.762010] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
Mon Mar 18 20:28:06 2019 kern.info kernel: [    3.795449] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
Mon Mar 18 20:28:06 2019 kern.info kernel: [    3.802853] hub 1-0:1.0: USB hub found
Mon Mar 18 20:28:06 2019 kern.info kernel: [    3.807133] hub 1-0:1.0: 1 port detected
Mon Mar 18 20:28:06 2019 kern.info kernel: [    3.814395] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Mon Mar 18 20:28:06 2019 kern.info kernel: [    3.822239] ohci-platform: OHCI generic platform driver
Mon Mar 18 20:28:06 2019 kern.info kernel: [    3.827883] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
Mon Mar 18 20:28:06 2019 kern.info kernel: [    3.834803] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
Mon Mar 18 20:28:06 2019 kern.info kernel: [    3.842978] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
Mon Mar 18 20:28:06 2019 kern.info kernel: [    3.920534] hub 2-0:1.0: USB hub found
Mon Mar 18 20:28:06 2019 kern.info kernel: [    3.924737] hub 2-0:1.0: 1 port detected
Mon Mar 18 20:28:06 2019 user.info kernel: [    3.933840] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Mon Mar 18 20:28:06 2019 user.info kernel: [    3.951730] init: - preinit -
Mon Mar 18 20:28:06 2019 kern.info kernel: [    5.389934] rt3050-esw 10110000.esw: link changed 0x00
Mon Mar 18 20:28:06 2019 kern.notice kernel: [    5.573587] random: procd: uninitialized urandom read (4 bytes read)
Mon Mar 18 20:28:06 2019 kern.notice kernel: [    8.940986] jffs2: notice: (387) jffs2_build_xattr_subsystem: complete building xattr subsystem, 41 of xdatum (3 unchecked, 38 orphan) and 45 of xref (38 dead, 0 orphan) found.
Mon Mar 18 20:28:06 2019 user.info kernel: [    8.959328] mount_root: switching to jffs2 overlay
Mon Mar 18 20:28:06 2019 kern.warn kernel: [    8.998267] overlayfs: upper fs does not support tmpfile.
Mon Mar 18 20:28:06 2019 user.warn kernel: [    9.010952] urandom-seed: Seeding with /etc/urandom.seed
Mon Mar 18 20:28:06 2019 user.info kernel: [    9.064384] procd: - early -
Mon Mar 18 20:28:06 2019 user.info kernel: [    9.068247] procd: - watchdog -
Mon Mar 18 20:28:06 2019 kern.info kernel: [    9.368818] rt3050-esw 10110000.esw: link changed 0x10
Mon Mar 18 20:28:06 2019 user.info kernel: [    9.973936] procd: - watchdog -
Mon Mar 18 20:28:06 2019 user.info kernel: [    9.977489] procd: - ubus -
Mon Mar 18 20:28:06 2019 kern.notice kernel: [   10.247144] random: ubusd: uninitialized urandom read (4 bytes read)
Mon Mar 18 20:28:06 2019 kern.notice kernel: [   10.333810] random: ubusd: uninitialized urandom read (4 bytes read)
Mon Mar 18 20:28:06 2019 kern.notice kernel: [   10.340874] random: ubusd: uninitialized urandom read (4 bytes read)
Mon Mar 18 20:28:06 2019 user.info kernel: [   10.348463] procd: - init -
Mon Mar 18 20:28:06 2019 user.info kernel: [   10.901642] kmodloader: loading kernel modules from /etc/modules.d/*
Mon Mar 18 20:28:06 2019 kern.info kernel: [   11.001577] ip6_tables: (C) 2000-2006 Netfilter Core Team
Mon Mar 18 20:28:06 2019 kern.info kernel: [   11.020823] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
Mon Mar 18 20:28:06 2019 kern.info kernel: [   11.029015] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Mon Mar 18 20:28:06 2019 kern.info kernel: [   11.039092] ip_tables: (C) 2000-2006 Netfilter Core Team
Mon Mar 18 20:28:06 2019 kern.info kernel: [   11.054299] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
Mon Mar 18 20:28:06 2019 kern.info kernel: [   11.130568] xt_time: kernel timezone is -0000
Mon Mar 18 20:28:06 2019 kern.info kernel: [   11.199619] mt76_wmac 10300000.wmac: ASIC revision: 76280001
Mon Mar 18 20:28:06 2019 kern.info kernel: [   12.227676] mt76_wmac 10300000.wmac: Firmware Version: 20151201
Mon Mar 18 20:28:06 2019 kern.info kernel: [   12.233701] mt76_wmac 10300000.wmac: Build Time: 20151201183641
Mon Mar 18 20:28:06 2019 kern.info kernel: [   12.255435] mt76_wmac 10300000.wmac: firmware init done
Mon Mar 18 20:28:06 2019 kern.debug kernel: [   12.428556] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Mon Mar 18 20:28:06 2019 kern.info kernel: [   12.475343] PPP generic driver version 2.4.2
Mon Mar 18 20:28:06 2019 kern.info kernel: [   12.553998] NET: Registered protocol family 24
Mon Mar 18 20:28:06 2019 user.info kernel: [   12.562761] kmodloader: done loading kernel modules from /etc/modules.d/*
Mon Mar 18 20:28:06 2019 kern.warn kernel: [   13.650613] urandom_read: 5 callbacks suppressed
Mon Mar 18 20:28:06 2019 kern.notice kernel: [   13.650623] random: jshn: uninitialized urandom read (4 bytes read)
Mon Mar 18 20:28:07 2019 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Mon Mar 18 20:28:07 2019 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: started, version 2.80 cachesize 150
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: DNS service limited to local subnets
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: using local addresses only for domain test
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: using local addresses only for domain onion
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: using local addresses only for domain localhost
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: using local addresses only for domain local
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: using local addresses only for domain invalid
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: using local addresses only for domain bind
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: using local addresses only for domain lan
Mon Mar 18 20:28:08 2019 daemon.warn dnsmasq[721]: no servers found in /tmp/resolv.conf.auto, will retry
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: read /etc/hosts - 4 addresses
Mon Mar 18 20:28:08 2019 daemon.info dnsmasq[721]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Mon Mar 18 20:28:08 2019 authpriv.info dropbear[748]: Not backgrounding
Mon Mar 18 20:28:09 2019 kern.info kernel: [   17.387985] rt3050-esw 10110000.esw: link changed 0x00
Mon Mar 18 20:28:10 2019 user.notice : Added device handler type: tunnel
Mon Mar 18 20:28:10 2019 user.notice : Added device handler type: Network device
Mon Mar 18 20:28:10 2019 user.notice : Added device handler type: bridge
Mon Mar 18 20:28:10 2019 user.notice : Added device handler type: veth
Mon Mar 18 20:28:10 2019 user.notice : Added device handler type: macvlan
Mon Mar 18 20:28:10 2019 user.notice : Added device handler type: 8021ad
Mon Mar 18 20:28:10 2019 user.notice : Added device handler type: 8021q
Mon Mar 18 20:28:12 2019 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Mon Mar 18 20:28:12 2019 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/radvd
Mon Mar 18 20:28:12 2019 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Mon Mar 18 20:28:13 2019 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Mon Mar 18 20:28:13 2019 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Mon Mar 18 20:28:13 2019 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Mon Mar 18 20:28:13 2019 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Mon Mar 18 20:28:13 2019 kern.info kernel: [   21.380207] rt3050-esw 10110000.esw: link changed 0x10
Mon Mar 18 20:28:13 2019 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Mon Mar 18 20:28:14 2019 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Mon Mar 18 20:28:14 2019 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Mon Mar 18 20:28:14 2019 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Mon Mar 18 20:28:15 2019 daemon.notice procd: /etc/rc.d/S96led: setting up led USB
Mon Mar 18 20:28:15 2019 daemon.notice procd: /etc/rc.d/S96led: setting up led wlan2g
Mon Mar 18 20:28:15 2019 daemon.notice netifd: Interface 'loopback' is enabled
Mon Mar 18 20:28:15 2019 daemon.notice netifd: Interface 'loopback' is setting up now
Mon Mar 18 20:28:15 2019 daemon.notice netifd: Interface 'loopback' is now up
Mon Mar 18 20:28:15 2019 kern.info kernel: [   23.271942] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Mon Mar 18 20:28:15 2019 daemon.notice netifd: Interface 'lan' is enabled
Mon Mar 18 20:28:15 2019 daemon.notice netifd: Interface 'lan' is setting up now
Mon Mar 18 20:28:15 2019 daemon.notice netifd: Interface 'lan' is now up
Mon Mar 18 20:28:15 2019 daemon.notice procd: /etc/rc.d/S96led: setting up led lan
Mon Mar 18 20:28:15 2019 daemon.notice netifd: Network device 'lo' link is up
Mon Mar 18 20:28:15 2019 daemon.notice netifd: Interface 'loopback' has link connectivity
Mon Mar 18 20:28:16 2019 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Mon Mar 18 20:28:17 2019 daemon.info procd: - init complete -
Mon Mar 18 20:28:18 2019 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Mon Mar 18 20:28:18 2019 daemon.info dnsmasq[721]: read /etc/hosts - 4 addresses
Mon Mar 18 20:28:18 2019 daemon.info dnsmasq[721]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Mon Mar 18 20:28:19 2019 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Mon Mar 18 20:28:19 2019 kern.info kernel: [   27.103299] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mon Mar 18 20:28:19 2019 kern.info kernel: [   27.114318] br-lan: port 1(wlan0) entered blocking state
Mon Mar 18 20:28:19 2019 kern.info kernel: [   27.119805] br-lan: port 1(wlan0) entered disabled state
Mon Mar 18 20:28:19 2019 kern.info kernel: [   27.125597] device wlan0 entered promiscuous mode
Mon Mar 18 20:28:19 2019 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Mon Mar 18 20:28:19 2019 daemon.err hostapd: Using interface wlan0 with hwaddr b0:4e:26:eb:4e:5a and ssid "samowar"
Mon Mar 18 20:28:19 2019 kern.info kernel: [   27.659450] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mon Mar 18 20:28:19 2019 kern.info kernel: [   27.666141] br-lan: port 1(wlan0) entered blocking state
Mon Mar 18 20:28:19 2019 kern.info kernel: [   27.671534] br-lan: port 1(wlan0) entered forwarding state
Mon Mar 18 20:28:19 2019 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->ENABLED
Mon Mar 18 20:28:19 2019 daemon.notice hostapd: wlan0: AP-ENABLED
Mon Mar 18 20:28:19 2019 daemon.notice netifd: bridge 'br-lan' link is up
Mon Mar 18 20:28:19 2019 daemon.notice netifd: Interface 'lan' has link connectivity
Mon Mar 18 20:28:20 2019 kern.info kernel: [   27.701086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Mon Mar 18 20:28:20 2019 daemon.notice netifd: Network device 'wlan0' link is up
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[721]: exiting on receipt of SIGTERM
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: started, version 2.80 cachesize 150
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: DNS service limited to local subnets
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq-dhcp[1366]: DHCP, IP range 192.168.171.100 -- 192.168.171.249, lease time 12h
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: using local addresses only for domain test
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: using local addresses only for domain onion
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: using local addresses only for domain localhost
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: using local addresses only for domain local
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: using local addresses only for domain invalid
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: using local addresses only for domain bind
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: using local addresses only for domain lan
Mon Mar 18 20:28:25 2019 daemon.warn dnsmasq[1366]: no servers found in /tmp/resolv.conf.auto, will retry
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: read /etc/hosts - 4 addresses
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq-dhcp[1366]: read /etc/ethers - 0 addresses
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: read /etc/hosts - 4 addresses
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq[1366]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Mon Mar 18 20:28:25 2019 daemon.info dnsmasq-dhcp[1366]: read /etc/ethers - 0 addresses
Mon Mar 18 20:28:38 2019 daemon.info hostapd: wlan0: STA 68:94:23:8b:95:8d IEEE 802.11: authenticated
Mon Mar 18 20:28:38 2019 daemon.info hostapd: wlan0: STA 68:94:23:8b:95:8d IEEE 802.11: associated (aid 1)
Mon Mar 18 20:28:38 2019 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 68:94:23:8b:95:8d
Mon Mar 18 20:28:38 2019 daemon.info hostapd: wlan0: STA 68:94:23:8b:95:8d WPA: pairwise key handshake completed (RSN)
Mon Mar 18 20:28:38 2019 daemon.info dnsmasq-dhcp[1366]: DHCPREQUEST(br-lan) 192.168.171.164 68:94:23:8b:95:8d
Mon Mar 18 20:28:38 2019 daemon.info dnsmasq-dhcp[1366]: DHCPACK(br-lan) 192.168.171.164 68:94:23:8b:95:8d lesspass
Mon Mar 18 20:28:42 2019 daemon.info dnsmasq-dhcp[1366]: DHCPINFORM(br-lan) 192.168.171.164 68:94:23:8b:95:8d
Mon Mar 18 20:28:42 2019 daemon.info dnsmasq-dhcp[1366]: DHCPACK(br-lan) 192.168.171.164 68:94:23:8b:95:8d lesspass
Mon Mar 18 20:28:57 2019 authpriv.info dropbear[1405]: Child connection from 192.168.171.164:3020
Mon Mar 18 20:29:03 2019 authpriv.notice dropbear[1405]: Password auth succeeded for 'root' from 192.168.171.164:3020
Mon Mar 18 20:29:13 2019 kern.notice kernel: [   81.345478] random: crng init done

mar_w · 2019-03-19 01:50:42

mar_w
Użytkownik
Nieaktywny

Zarejestrowany: 2014-08-16
Posty: 2,124

Odp: TL-WR902AC v.3 - brak IP na interfejsie WAN

slawekw napisał/a:

...
Przepraszam za zwłokę, oto te informacje (nie wszystkie komendy działają):
root@fd2wew:~# brtctl show
-ash: brtctl: not found
...

Pewnie że nie działają, bo Cezary prosił o:

Cezary napisał/a:

brctl show

Xiaomi AX3000T @ Netgear R6220
* DVBT2 - T230C *

Cezary · 2019-03-19 06:36:45

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 116,212

Odp: TL-WR902AC v.3 - brak IP na interfejsie WAN

On twierdzi że nie masz wanu a w konfigach pokazałeś że zrobiłeś. Więc jak to jest?

Przywróć ustawienia domyślne i skonfiguruj tak jak napisałem.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

slawekw · 2019-07-21 19:52:18

slawekw
Użytkownik
Nieaktywny

Zarejestrowany: 2015-11-18
Posty: 87

Odp: TL-WR902AC v.3 - brak IP na interfejsie WAN

Po zainstalowaniu OpenWrt 18.06.4, r7808-ef686b7292 i z poniższą konfiguracją działa ok na tym ruterze (dostawca internety Vectra, dynamiczne IP na WAN). Może komuś się przyda.

/etc/config/network:

config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config globals 'globals'
        option ula_prefix 'fd8a:1513:f08c::/48'

config interface 'lan'
        option type 'bridge'
        option proto 'static'
        option ipaddr '192.168.1.1'
        option netmask '255.255.255.0'
        option ip6assign '60'

config interface 'wan'
        option ifname 'eth0.1'
        option proto 'dhcp'
        option peerdns '0'
        option delegate '0'
        option dns '1.1.1.1 1.0.0.1 9.9.9.9 149.112.112.112 8.8.8.8 8.8.4.4'

config switch
        option name 'switch0'
        option reset '1'
        option enable_vlan '1'

config switch_vlan
        option device 'switch0'
        option vlan '1'
        option ports '4 6t'

/etc/config/wireless:

config wifi-device 'radio0'
        option type 'mac80211'
        option channel '11'
        option hwmode '11g'
        option path 'platform/10300000.wmac'
        option htmode 'HT20'
        option disabled '0'

config wifi-iface 'default_radio0'
        option device 'radio0'
        option network 'lan'
        option mode 'ap'
        option ssid 'wifiname'
        option encryption 'psk2'
        option key 'wifihaslo'

FAQ o OpenWrt | Sprzedam różne routery | Oddam

TL-WR902AC v.3 - brak IP na interfejsie WAN

Posty: 8

1 Temat przez slawekw 2019-03-16 19:57:17

Temat: TL-WR902AC v.3 - brak IP na interfejsie WAN

2 Odpowiedź przez Cezary 2019-03-16 20:10:23

Odp: TL-WR902AC v.3 - brak IP na interfejsie WAN

3 Odpowiedź przez slawekw 2019-03-16 21:13:32

Odp: TL-WR902AC v.3 - brak IP na interfejsie WAN

4 Odpowiedź przez Cezary 2019-03-16 21:16:05

Odp: TL-WR902AC v.3 - brak IP na interfejsie WAN

5 Odpowiedź przez slawekw 2019-03-18 21:46:51

Odp: TL-WR902AC v.3 - brak IP na interfejsie WAN

6 Odpowiedź przez mar_w 2019-03-19 01:50:42

Odp: TL-WR902AC v.3 - brak IP na interfejsie WAN

7 Odpowiedź przez Cezary 2019-03-19 06:36:45

Odp: TL-WR902AC v.3 - brak IP na interfejsie WAN

8 Odpowiedź przez slawekw 2019-07-21 19:52:18

Odp: TL-WR902AC v.3 - brak IP na interfejsie WAN

Posty: 8