FAQ o OpenWrt | Sprzedam różne routery | Oddam

Bekon · 2019-01-02 10:10:12

Bekon
Użytkownik
Nieaktywny

Zarejestrowany: 2019-01-02
Posty: 16

Temat: Openwrt na Mikrotik RBcAPL-2nD

Witam,

Próbował ktoś wrzucić OpenWRT na Mikrotika RBcAPL-2nD?
Jest jakiś wątek na stronie openwrt ale niestety bez sukcesu.

Mam 2 takie AP i z chęcią przesiadłbym się na OpenWRT. Niestety nie mam doświadczenia aby zająć się tym samemu i zbudować działający obraz.

Cezary, może podeślę Ci swojego AP - znajdziesz czas żeby sie tym zająć?

Pozdrawiam

Cezary · 2019-01-02 10:46:49

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 116,359

Odp: Openwrt na Mikrotik RBcAPL-2nD

Tak, ale...

 *  Furthermore, the cAP lite (cAPL2nD) appears to feature the exact same
 *  hardware as the mAP L-2nD. It is unknown if they share the same board
 *  identifier.

Więc możliwe jest już wspierany. Uruchom go z initramfs jak każdego małego mikrotika, zobacz czy możesz się zalogować przez ssh do niego. Jeżeli tak - pokaż wynik polecenia dmesg i logread.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Bekon · 2019-01-02 10:50:31

Bekon
Użytkownik
Nieaktywny

Zarejestrowany: 2019-01-02
Posty: 16

Odp: Openwrt na Mikrotik RBcAPL-2nD

OK. Dzięki za informację. Jak wróce z pracy to dam znać.

Bekon · 2019-01-02 16:24:57

Bekon
Użytkownik
Nieaktywny

Zarejestrowany: 2019-01-02
Posty: 16

Odp: Openwrt na Mikrotik RBcAPL-2nD

[    0.000000] Linux version 4.9.120 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7101-a63e38b) ) #0 Wed Aug 15 20:42:39 2018
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] User-defined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 804757d4, node_mem_map 81000020
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: no-uart no-buzzer no-nand parts=1 boot_part_size=16777216 gpio=8520235 HZ=325000000 mem=64M kmac=B8:69:F4:86:44:9A board=map-hb board=map-hb hw_opt=00284001 boot=0 mlc=11 console=ttyS0,115200 rootfstype=squashfs noinitrd
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 57716K/65536K available (3578K kernel code, 153K rwdata, 452K rodata, 2400K init, 217K bss, 7820K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:650.000MHz, DDR:600.000MHz, AHB:300.000MHz, Ref:25.000MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5880801374 ns
[    0.000009] sched_clock: 32 bits at 325MHz, resolution 3ns, wraps every 6607641598ns
[    0.008870] Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688)
[    0.071946] pid_max: default: 32768 minimum: 301
[    0.077294] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.084807] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.095679] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.106881] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.115014] NET: Registered protocol family 16
[    0.123731] MIPS: machine is MikroTik RouterBOARD cAP L-2nD
[    0.371839] Can't analyze schedule() prologue at 803dae54
[    0.390427] clocksource: Switched to clocksource MIPS
[    0.397193] NET: Registered protocol family 2
[    0.403084] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.411056] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.418279] TCP: Hash tables configured (established 1024 bind 1024)
[    0.425604] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.432273] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.439639] NET: Registered protocol family 1
[    0.444652] PCI: CLS 0 bytes, default 32
[    2.570441] random: fast init done
[    2.964659] Crashlog allocated RAM at address 0x3f00000
[    2.971788] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[    2.985965] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.992623] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    3.089994] io scheduler noop registered
[    3.094503] io scheduler deadline registered (default)
[    3.100754] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    3.110527] console [ttyS0] disabled
[    3.134693] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
[    3.144487] console [ttyS0] enabled
[    3.152035] bootconsole [early0] disabled
[    3.166299] m25p80 spi0.0: unrecognized JEDEC id bytes: ef, 70, 18
[    3.173750] libphy: Fixed MDIO Bus: probed
[    3.292711] libphy: ag71xx_mdio: probed
[    3.922744] ag71xx-mdio.1: Found an AR934X built-in switch
[    3.976270] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[    3.984136] NET: Registered protocol family 10
[    3.992236] NET: Registered protocol family 17
[    3.996881] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    4.010308] 8021q: 802.1Q VLAN Support v1.8
[    4.031462] Freeing unused kernel memory: 2400K
[    4.036148] This architecture does not have kernel memory protection.
[    4.055751] init: Console is alive
[    4.059497] init: - watchdog -
[    4.082631] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.092065] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.110240] init: - preinit -
[    4.319106] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.951858] eth0: link up (1000Mbps/Full duplex)
[    5.956665] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    7.465071] eth0: link down
[    7.478688] procd: - early -
[    7.482477] procd: - watchdog -
[    8.030029] procd: - watchdog -
[    8.033588] procd: - ubus -
[    8.043825] random: ubusd: uninitialized urandom read (4 bytes read)
[    8.086685] random: ubusd: uninitialized urandom read (4 bytes read)
[    8.093727] random: ubusd: uninitialized urandom read (4 bytes read)
[    8.101206] procd: - init -
[    8.271080] kmodloader: loading kernel modules from /etc/modules.d/*
[    8.281390] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    8.296446] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[    8.304774] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[    8.314490] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.327657] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[    8.382647] xt_time: kernel timezone is -0000
[    8.436930] PPP generic driver version 2.4.2
[    8.443761] NET: Registered protocol family 24
[    8.487086] ath: EEPROM regdomain: 0x0
[    8.487096] ath: EEPROM indicates default country code should be used
[    8.487099] ath: doing EEPROM country->regdmn map search
[    8.487114] ath: country maps to regdmn code: 0x3a
[    8.487119] ath: Country alpha2 being used: US
[    8.487122] ath: Regpair used: 0x3a
[    8.497930] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    8.502151] ieee80211 phy0: Atheros AR9531 Rev:2 mem=0xb8100000, irq=47
[    8.540896] kmodloader: done loading kernel modules from /etc/modules.d/*
[    9.665249] urandom_read: 5 callbacks suppressed
[    9.665257] random: jshn: uninitialized urandom read (4 bytes read)
[    9.732074] random: jshn: uninitialized urandom read (4 bytes read)
[   18.891531] br-lan: port 1(eth0) entered blocking state
[   18.896940] br-lan: port 1(eth0) entered disabled state
[   18.902757] device eth0 entered promiscuous mode
[   18.982429] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   21.021945] eth0: link up (1000Mbps/Full duplex)
[   21.026764] br-lan: port 1(eth0) entered blocking state
[   21.032193] br-lan: port 1(eth0) entered forwarding state
[   21.072459] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[  128.390482] random: crng init done

Thu Aug 16 20:53:42 2018 kern.notice kernel: [    0.000000] Linux version 4.9.120 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7101-a63e38b) ) #0 Wed Aug 15 20:42:39 2018
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000] Determined physical RAM map:
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000]  memory: 04000000 @ 00000000 (usable)
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000] User-defined physical RAM map:
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000]  memory: 04000000 @ 00000000 (usable)
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Thu Aug 16 20:53:42 2018 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Thu Aug 16 20:53:42 2018 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000] Zone ranges:
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000] Movable zone start for each node
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000] Early memory node ranges
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Thu Aug 16 20:53:42 2018 kern.debug kernel: [    0.000000] On node 0 totalpages: 16384
Thu Aug 16 20:53:42 2018 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 804757d4, node_mem_map 81000020
Thu Aug 16 20:53:42 2018 kern.debug kernel: [    0.000000]   Normal zone: 128 pages used for memmap
Thu Aug 16 20:53:42 2018 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Thu Aug 16 20:53:42 2018 kern.debug kernel: [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
Thu Aug 16 20:53:42 2018 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Thu Aug 16 20:53:42 2018 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Thu Aug 16 20:53:42 2018 kern.notice kernel: [    0.000000] Kernel command line: no-uart no-buzzer no-nand parts=1 boot_part_size=16777216 gpio=8520235 HZ=325000000 mem=64M kmac=B8:69:F4:86:44:9A board=map-hb board=map-hb hw_opt=00284001 boot=0 mlc=11 console=ttyS0,115200 rootfstype=squashfs noinitrd
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000] Memory: 57716K/65536K available (3578K kernel code, 153K rwdata, 452K rodata, 2400K init, 217K bss, 7820K reserved, 0K cma-reserved)
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000] NR_IRQS:51
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000] Clocks: CPU:650.000MHz, DDR:600.000MHz, AHB:300.000MHz, Ref:25.000MHz
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5880801374 ns
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.000009] sched_clock: 32 bits at 325MHz, resolution 3ns, wraps every 6607641598ns
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.008870] Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688)
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.071946] pid_max: default: 32768 minimum: 301
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.077294] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.084807] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.095679] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.106881] futex hash table entries: 256 (order: -1, 3072 bytes)
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.115014] NET: Registered protocol family 16
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.123731] MIPS: machine is MikroTik RouterBOARD cAP L-2nD
Thu Aug 16 20:53:42 2018 kern.warn kernel: [    0.371839] Can't analyze schedule() prologue at 803dae54
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.390427] clocksource: Switched to clocksource MIPS
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.397193] NET: Registered protocol family 2
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.403084] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.411056] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.418279] TCP: Hash tables configured (established 1024 bind 1024)
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.425604] UDP hash table entries: 256 (order: 0, 4096 bytes)
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.432273] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Thu Aug 16 20:53:42 2018 kern.info kernel: [    0.439639] NET: Registered protocol family 1
Thu Aug 16 20:53:42 2018 kern.debug kernel: [    0.444652] PCI: CLS 0 bytes, default 32
Thu Aug 16 20:53:42 2018 kern.notice kernel: [    2.570441] random: fast init done
Thu Aug 16 20:53:42 2018 kern.warn kernel: [    2.964659] Crashlog allocated RAM at address 0x3f00000
Thu Aug 16 20:53:42 2018 kern.info kernel: [    2.971788] workingset: timestamp_bits=30 max_order=14 bucket_order=0
Thu Aug 16 20:53:42 2018 kern.info kernel: [    2.985965] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Aug 16 20:53:42 2018 kern.info kernel: [    2.992623] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Aug 16 20:53:42 2018 kern.info kernel: [    3.089994] io scheduler noop registered
Thu Aug 16 20:53:42 2018 kern.info kernel: [    3.094503] io scheduler deadline registered (default)
Thu Aug 16 20:53:42 2018 kern.info kernel: [    3.100754] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Thu Aug 16 20:53:42 2018 kern.info kernel: [    3.110527] console [ttyS0] disabled
Thu Aug 16 20:53:42 2018 kern.info kernel: [    3.134693] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
Thu Aug 16 20:53:42 2018 kern.info kernel: [    3.144487] console [ttyS0] enabled
Thu Aug 16 20:53:42 2018 kern.info kernel: [    3.152035] bootconsole [early0] disabled
Thu Aug 16 20:53:42 2018 kern.err kernel: [    3.166299] m25p80 spi0.0: unrecognized JEDEC id bytes: ef, 70, 18
Thu Aug 16 20:53:42 2018 kern.info kernel: [    3.173750] libphy: Fixed MDIO Bus: probed
Thu Aug 16 20:53:42 2018 kern.info kernel: [    3.292711] libphy: ag71xx_mdio: probed
Thu Aug 16 20:53:42 2018 kern.info kernel: [    3.922744] ag71xx-mdio.1: Found an AR934X built-in switch
Thu Aug 16 20:53:42 2018 kern.info kernel: [    3.976270] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
Thu Aug 16 20:53:42 2018 kern.info kernel: [    3.984136] NET: Registered protocol family 10
Thu Aug 16 20:53:42 2018 kern.info kernel: [    3.992236] NET: Registered protocol family 17
Thu Aug 16 20:53:42 2018 kern.info kernel: [    3.996881] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Thu Aug 16 20:53:42 2018 kern.info kernel: [    4.010308] 8021q: 802.1Q VLAN Support v1.8
Thu Aug 16 20:53:42 2018 kern.info kernel: [    4.031462] Freeing unused kernel memory: 2400K
Thu Aug 16 20:53:42 2018 kern.warn kernel: [    4.036148] This architecture does not have kernel memory protection.
Thu Aug 16 20:53:42 2018 user.info kernel: [    4.055751] init: Console is alive
Thu Aug 16 20:53:42 2018 user.info kernel: [    4.059497] init: - watchdog -
Thu Aug 16 20:53:42 2018 user.info kernel: [    4.082631] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Thu Aug 16 20:53:42 2018 user.info kernel: [    4.092065] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Thu Aug 16 20:53:42 2018 user.info kernel: [    4.110240] init: - preinit -
Thu Aug 16 20:53:42 2018 kern.info kernel: [    4.319106] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Thu Aug 16 20:53:42 2018 kern.info kernel: [    5.951858] eth0: link up (1000Mbps/Full duplex)
Thu Aug 16 20:53:42 2018 kern.info kernel: [    5.956665] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Aug 16 20:53:42 2018 kern.info kernel: [    7.465071] eth0: link down
Thu Aug 16 20:53:42 2018 user.info kernel: [    7.478688] procd: - early -
Thu Aug 16 20:53:42 2018 user.info kernel: [    7.482477] procd: - watchdog -
Thu Aug 16 20:53:42 2018 user.info kernel: [    8.030029] procd: - watchdog -
Thu Aug 16 20:53:42 2018 user.info kernel: [    8.033588] procd: - ubus -
Thu Aug 16 20:53:42 2018 kern.notice kernel: [    8.043825] random: ubusd: uninitialized urandom read (4 bytes read)
Thu Aug 16 20:53:42 2018 kern.notice kernel: [    8.086685] random: ubusd: uninitialized urandom read (4 bytes read)
Thu Aug 16 20:53:42 2018 kern.notice kernel: [    8.093727] random: ubusd: uninitialized urandom read (4 bytes read)
Thu Aug 16 20:53:42 2018 user.info kernel: [    8.101206] procd: - init -
Thu Aug 16 20:53:42 2018 user.info kernel: [    8.271080] kmodloader: loading kernel modules from /etc/modules.d/*
Thu Aug 16 20:53:42 2018 kern.info kernel: [    8.281390] ip6_tables: (C) 2000-2006 Netfilter Core Team
Thu Aug 16 20:53:42 2018 kern.info kernel: [    8.296446] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
Thu Aug 16 20:53:42 2018 kern.info kernel: [    8.304774] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Thu Aug 16 20:53:42 2018 kern.info kernel: [    8.314490] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Aug 16 20:53:42 2018 kern.info kernel: [    8.327657] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
Thu Aug 16 20:53:42 2018 kern.info kernel: [    8.382647] xt_time: kernel timezone is -0000
Thu Aug 16 20:53:42 2018 kern.info kernel: [    8.436930] PPP generic driver version 2.4.2
Thu Aug 16 20:53:42 2018 kern.info kernel: [    8.443761] NET: Registered protocol family 24
Thu Aug 16 20:53:42 2018 kern.debug kernel: [    8.487086] ath: EEPROM regdomain: 0x0
Thu Aug 16 20:53:42 2018 kern.debug kernel: [    8.487096] ath: EEPROM indicates default country code should be used
Thu Aug 16 20:53:42 2018 kern.debug kernel: [    8.487099] ath: doing EEPROM country->regdmn map search
Thu Aug 16 20:53:42 2018 kern.debug kernel: [    8.487114] ath: country maps to regdmn code: 0x3a
Thu Aug 16 20:53:42 2018 kern.debug kernel: [    8.487119] ath: Country alpha2 being used: US
Thu Aug 16 20:53:42 2018 kern.debug kernel: [    8.487122] ath: Regpair used: 0x3a
Thu Aug 16 20:53:42 2018 kern.debug kernel: [    8.497930] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Thu Aug 16 20:53:42 2018 kern.info kernel: [    8.502151] ieee80211 phy0: Atheros AR9531 Rev:2 mem=0xb8100000, irq=47
Thu Aug 16 20:53:42 2018 user.info kernel: [    8.540896] kmodloader: done loading kernel modules from /etc/modules.d/*
Thu Aug 16 20:53:42 2018 kern.warn kernel: [    9.665249] urandom_read: 5 callbacks suppressed
Thu Aug 16 20:53:42 2018 kern.notice kernel: [    9.665257] random: jshn: uninitialized urandom read (4 bytes read)
Thu Aug 16 20:53:42 2018 kern.notice kernel: [    9.732074] random: jshn: uninitialized urandom read (4 bytes read)
Thu Aug 16 20:53:42 2018 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Thu Aug 16 20:53:42 2018 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Thu Aug 16 20:53:42 2018 daemon.info dnsmasq[761]: started, version 2.80test3 cachesize 150
Thu Aug 16 20:53:42 2018 daemon.info dnsmasq[761]: DNS service limited to local subnets
Thu Aug 16 20:53:42 2018 daemon.info dnsmasq[761]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Aug 16 20:53:42 2018 daemon.info dnsmasq[761]: using local addresses only for domain test
Thu Aug 16 20:53:42 2018 daemon.info dnsmasq[761]: using local addresses only for domain onion
Thu Aug 16 20:53:42 2018 daemon.info dnsmasq[761]: using local addresses only for domain localhost
Thu Aug 16 20:53:42 2018 daemon.info dnsmasq[761]: using local addresses only for domain local
Thu Aug 16 20:53:42 2018 daemon.info dnsmasq[761]: using local addresses only for domain invalid
Thu Aug 16 20:53:42 2018 daemon.info dnsmasq[761]: using local addresses only for domain bind
Thu Aug 16 20:53:42 2018 daemon.info dnsmasq[761]: using local addresses only for domain lan
Thu Aug 16 20:53:42 2018 daemon.warn dnsmasq[761]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Aug 16 20:53:42 2018 daemon.info dnsmasq[761]: read /etc/hosts - 4 addresses
Thu Aug 16 20:53:42 2018 daemon.info dnsmasq[761]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Aug 16 20:53:43 2018 user.notice : Added device handler type: tunnel
Thu Aug 16 20:53:43 2018 user.notice : Added device handler type: Network device
Thu Aug 16 20:53:43 2018 user.notice : Added device handler type: bridge
Thu Aug 16 20:53:43 2018 user.notice : Added device handler type: veth
Thu Aug 16 20:53:43 2018 user.notice : Added device handler type: macvlan
Thu Aug 16 20:53:43 2018 user.notice : Added device handler type: 8021ad
Thu Aug 16 20:53:43 2018 user.notice : Added device handler type: 8021q
Thu Aug 16 20:53:44 2018 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled
Thu Aug 16 20:53:44 2018 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled
Thu Aug 16 20:53:46 2018 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Thu Aug 16 20:53:46 2018 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/radvd
Thu Aug 16 20:53:46 2018 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Thu Aug 16 20:53:46 2018 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Thu Aug 16 20:53:46 2018 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Thu Aug 16 20:53:46 2018 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Thu Aug 16 20:53:47 2018 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Thu Aug 16 20:53:47 2018 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Thu Aug 16 20:53:48 2018 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Thu Aug 16 20:53:48 2018 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Thu Aug 16 20:53:48 2018 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Thu Aug 16 20:53:49 2018 kern.info kernel: [   18.891531] br-lan: port 1(eth0) entered blocking state
Thu Aug 16 20:53:49 2018 kern.info kernel: [   18.896940] br-lan: port 1(eth0) entered disabled state
Thu Aug 16 20:53:49 2018 kern.info kernel: [   18.902757] device eth0 entered promiscuous mode
Thu Aug 16 20:53:49 2018 daemon.notice netifd: Interface 'lan' is enabled
Thu Aug 16 20:53:49 2018 daemon.notice netifd: Interface 'lan' is setting up now
Thu Aug 16 20:53:49 2018 kern.info kernel: [   18.982429] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Thu Aug 16 20:53:49 2018 daemon.notice netifd: Interface 'lan' is now up
Thu Aug 16 20:53:49 2018 daemon.notice netifd: Interface 'loopback' is enabled
Thu Aug 16 20:53:49 2018 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Aug 16 20:53:49 2018 daemon.notice netifd: Interface 'loopback' is now up
Thu Aug 16 20:53:49 2018 daemon.notice netifd: Network device 'lo' link is up
Thu Aug 16 20:53:49 2018 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Aug 16 20:53:50 2018 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Aug 16 20:53:51 2018 daemon.info procd: - init complete -
Thu Aug 16 20:53:51 2018 kern.info kernel: [   21.021945] eth0: link up (1000Mbps/Full duplex)
Thu Aug 16 20:53:51 2018 kern.info kernel: [   21.026764] br-lan: port 1(eth0) entered blocking state
Thu Aug 16 20:53:51 2018 kern.info kernel: [   21.032193] br-lan: port 1(eth0) entered forwarding state
Thu Aug 16 20:53:51 2018 daemon.notice netifd: Network device 'eth0' link is up
Thu Aug 16 20:53:51 2018 daemon.notice netifd: bridge 'br-lan' link is up
Thu Aug 16 20:53:51 2018 daemon.notice netifd: Interface 'lan' has link connectivity
Thu Aug 16 20:53:51 2018 kern.info kernel: [   21.072459] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Thu Aug 16 20:53:52 2018 user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override
Thu Aug 16 20:53:52 2018 daemon.info dnsmasq[761]: read /etc/hosts - 4 addresses
Thu Aug 16 20:53:52 2018 daemon.info dnsmasq[761]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Aug 16 20:53:53 2018 authpriv.info dropbear[1284]: Not backgrounding
Thu Aug 16 20:53:53 2018 daemon.info dnsmasq[761]: read /etc/hosts - 4 addresses
Thu Aug 16 20:53:53 2018 daemon.info dnsmasq[761]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Aug 16 20:55:39 2018 kern.notice kernel: [  128.390482] random: crng init done
Thu Aug 16 20:55:39 2018 daemon.info urandom_seed[1154]: Seed saved (/etc/urandom.seed)
Thu Aug 16 20:58:01 2018 daemon.warn odhcpd[854]: DHCPV6 SOLICIT IA_NA from 0001000121b0dab6b827eb8cd80a on br-lan: ok fdda:28ba:8fa::bca/128
Thu Aug 16 20:58:01 2018 daemon.warn odhcpd[854]: DHCPV6 REQUEST IA_NA from 0001000121b0dab6b827eb8cd80a on br-lan: ok fdda:28ba:8fa::bca/128
Thu Aug 16 20:58:01 2018 daemon.info dnsmasq[761]: read /etc/hosts - 4 addresses
Thu Aug 16 20:58:01 2018 daemon.info dnsmasq[761]: read /tmp/hosts/odhcpd - 1 addresses
Thu Aug 16 20:58:01 2018 daemon.info dnsmasq[761]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Aug 16 20:58:01 2018 daemon.info dnsmasq[761]: read /etc/hosts - 4 addresses
Thu Aug 16 20:58:01 2018 daemon.info dnsmasq[761]: read /tmp/hosts/odhcpd - 1 addresses
Thu Aug 16 20:58:01 2018 daemon.info dnsmasq[761]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Aug 16 21:03:03 2018 daemon.warn odhcpd[854]: DHCPV6 SOLICIT IA_NA from 00010001219f5922f48e38f438f4 on br-lan: ok fdda:28ba:8fa::5c8/128
Thu Aug 16 21:03:03 2018 daemon.warn odhcpd[854]: DHCPV6 SOLICIT IA_NA from 00010001219f5922f48e38f438f4 on br-lan: ok fdda:28ba:8fa::5c8/128
Thu Aug 16 21:03:07 2018 daemon.warn odhcpd[854]: DHCPV6 SOLICIT IA_NA from 00010001219f5922f48e38f438f4 on br-lan: ok fdda:28ba:8fa::5c8/128
Thu Aug 16 21:03:07 2018 daemon.warn odhcpd[854]: DHCPV6 SOLICIT IA_NA from 00010001219f5922f48e38f438f4 on br-lan: ok fdda:28ba:8fa::5c8/128
Thu Aug 16 21:03:08 2018 daemon.warn odhcpd[854]: DHCPV6 REQUEST IA_NA from 00010001219f5922f48e38f438f4 on br-lan: ok fdda:28ba:8fa::5c8/128
Thu Aug 16 21:03:09 2018 daemon.info dnsmasq[761]: read /etc/hosts - 4 addresses
Thu Aug 16 21:03:09 2018 daemon.info dnsmasq[761]: read /tmp/hosts/odhcpd - 2 addresses
Thu Aug 16 21:03:09 2018 daemon.info dnsmasq[761]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Aug 16 21:03:47 2018 authpriv.info dropbear[1374]: Child connection from 192.168.1.2:62238
Thu Aug 16 21:03:51 2018 authpriv.notice dropbear[1374]: Auth succeeded with blank password for 'root' from 192.168.1.2:62238

Bekon · 2019-01-02 17:27:20

Bekon
Użytkownik
Nieaktywny

Zarejestrowany: 2019-01-02
Posty: 16

Odp: Openwrt na Mikrotik RBcAPL-2nD

Włączyłem radio0 i wyglada na to że działa Potestuje i dam znać.

Cezary · 2019-01-02 18:03:14

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 116,359

Odp: Openwrt na Mikrotik RBcAPL-2nD

m25p80 spi0.0: unrecognized JEDEC id bytes: ef, 70, 18

Jest prawie ok - zainstaluj mój obraz z eko.one.pl i będzie działać.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Bekon · 2019-01-02 18:07:41

Bekon
Użytkownik
Nieaktywny

Zarejestrowany: 2019-01-02
Posty: 16

Odp: Openwrt na Mikrotik RBcAPL-2nD

Czy mogę użyć pliku z LZMA? Bo tylko taki jest dostępny w Twoim repo.

Cezary · 2019-01-02 18:10:26

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 116,359

Odp: Openwrt na Mikrotik RBcAPL-2nD

Co ty opowiadasz. Masz przecież komplet https://dl.eko.one.pl/luci/openwrt-18.0 … /mikrotik/

Uruchamiasz z mojego initramfs z później robisz sysupgrade -n obrazem https://dl.eko.one.pl/luci/openwrt-18.0 … pgrade.bin

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Bekon · 2019-01-02 18:15:06

Bekon
Użytkownik
Nieaktywny

Zarejestrowany: 2019-01-02
Posty: 16

Odp: Openwrt na Mikrotik RBcAPL-2nD

Zapytałem tylko czy mogę użyć skompresowanego obrazu. Ze strony openwrt używałem vmlinux-initramfs.elf - 6544.6 KB
U Ciebie jest tylko: openwrt-18.06-snapshot-r7405-06a20afb34-ar71xx-mikrotik-vmlinux-initramfs-lzma.elf - 4 MB.

Cezary · 2019-01-02 18:18:17

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 116,359

Odp: Openwrt na Mikrotik RBcAPL-2nD

On nie jest kompresowany, jest zwykły normalny. To że ma inną wielkość to normalnie - przecież ja mam inną zawartość obrazów. To akurat co wskazałeś nie ma luci, i też może być bo on służy tylko do flashowania właściwego obrazu.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Bekon · 2019-01-02 18:20:20

Bekon
Użytkownik
Nieaktywny

Zarejestrowany: 2019-01-02
Posty: 16

Odp: Openwrt na Mikrotik RBcAPL-2nD

OK. Dzięki za informację.

Dostaje taki komunikat przy sysupgrade -n

root@OpenWrt:/tmp# sysupgrade -n ./openwrt-18.06-snapshot-r7405-06a20afb34-ar71xx-mikrotik-rb-nor-flash-16M-squashfs-sysupgrade.bin
Device unknown not supported by this image
Supported devices: rb-750-r2 rb-750up-r2 rb-750p-pbr2 rb-911-2hn rb-911-5hn rb-941-2nd rb-951ui-2nd rb-952ui-5ac2nd rb-962uigs-5hact2hnt rb-lhg-5nd rb-map-2nd rb-mapl-2nd rb-wap-2nd rb-wapr-2nd
Image check 'fwtool_check_image' failed.

Cezary · 2019-01-02 18:23:25

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 116,359

Odp: Openwrt na Mikrotik RBcAPL-2nD

Nie przejmuj się. sysupgrade -F -n

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Bekon · 2019-01-02 19:07:10

Bekon
Użytkownik
Nieaktywny

Zarejestrowany: 2019-01-02
Posty: 16

Odp: Openwrt na Mikrotik RBcAPL-2nD

Dzięki działa. Pozdrawiam.

Cezary · 2019-01-02 19:08:16

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 116,359

Odp: Openwrt na Mikrotik RBcAPL-2nD

Przy następnej aktualizacji będziesz musiał zrobić także z -F bo on nie zna modelu cAP. Ale ideologicznie powinno wszystko działać.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

corsair · 2024-07-24 09:34:03

corsair
Użytkownik
Nieaktywny

Zarejestrowany: 2012-10-05
Posty: 96

Odp: Openwrt na Mikrotik RBcAPL-2nD

Czy do tego mikrotika wejdzie openwrt 23.05 Luci?
Jeśli tak to mogę prosić o aktualne linki ?

Cezary · 2024-07-24 09:39:28

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 116,359

Odp: Openwrt na Mikrotik RBcAPL-2nD

https://dl.eko.one.pl/firmware/?version … d-mapl-2nd

Jeżeli nadal będzie działać.

Initramfs weź jakieś starsze i bez luci, np. https://dl.eko.one.pl/firmware/?version … d-mapl-2nd bo obecne jest za duże dla starszych modeli mikrotików.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

corsair · 2024-07-24 17:55:23

corsair
Użytkownik
Nieaktywny

Zarejestrowany: 2012-10-05
Posty: 96

Odp: Openwrt na Mikrotik RBcAPL-2nD

Nie moge wrzucić pliku do ramu . Nie znajduje mi serwera tftp (tftpd64).
Uruchamiam server tftp,podaje gdzie znajduje sie plik , wczesniej na sztywno na lanie adresuje na kompie 192.168.1.100 .
Rb wylaczony, wciskam reset i trzymam, wl zasilanie czekam i nic puszczam reset i dalej nic diody mrugaja

Cezary · 2024-07-24 17:57:09

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 116,359

Odp: Openwrt na Mikrotik RBcAPL-2nD

Próbuj aż do skutku. Możesz też podłączyć go do jakiegoś switcha, żeby windows nie przestawiał adresu w tftpd.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

corsair · 2024-07-24 18:06:38

corsair
Użytkownik
Nieaktywny

Zarejestrowany: 2012-10-05
Posty: 96

Odp: Openwrt na Mikrotik RBcAPL-2nD

Czy plik luci-23.05-snapshot-r24014-76a0c2932c-ath79-mikrotik-mikrotik_routerboard-mapl-2nd-initramfs-kernel.bin
po zmianie na krotsza nazwe vmlinux ma miec na koncu rozrzeszenie .bin czy nie trzeba

Cezary · 2024-07-24 18:10:26

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 116,359

Odp: Openwrt na Mikrotik RBcAPL-2nD

Wszystko jedno. I tak przecież podajesz nazwę pliku, więc może się nazywać i alamakota i też będzie dobrze.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary · 2024-07-24 18:14:02

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 116,359

Odp: Openwrt na Mikrotik RBcAPL-2nD

PS. Ty ustawiasz to odpowiednio. prawda? Bo to nie jest "samo" tftp. Zobacz np. https://www.youtube.com/watch?v=2k1uji4el7c

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

corsair · 2024-07-24 19:12:21

corsair
Użytkownik
Nieaktywny

Zarejestrowany: 2012-10-05
Posty: 96

Odp: Openwrt na Mikrotik RBcAPL-2nD

Dzieki Cezary skorzystąłem z filmiku i poszło . Zawsze można liczyć na Ciebie ,pozdrawiam

Cezary · 2024-07-24 20:39:46

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 116,359

Odp: Openwrt na Mikrotik RBcAPL-2nD

No dobra, ale działa nadal? Jest ethernet, wifi, flash?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

corsair · 2024-07-24 22:15:59

corsair
Użytkownik
Nieaktywny

Zarejestrowany: 2012-10-05
Posty: 96

Odp: Openwrt na Mikrotik RBcAPL-2nD

Jednak cos jest nie tak. Najpierw wgrałem Luci ale zmieniłem na gargolyle bo Luci jest dla mnie jednak obce.
Na gargoyle zaczał ginać ethernet długo wstaje urzadzenie i za chwile nie ma komunikacji.

FAQ o OpenWrt | Sprzedam różne routery | Oddam

Openwrt na Mikrotik RBcAPL-2nD

Posty: 24

1 Temat przez Bekon 2019-01-02 10:10:12

Temat: Openwrt na Mikrotik RBcAPL-2nD

2 Odpowiedź przez Cezary 2019-01-02 10:46:49

Odp: Openwrt na Mikrotik RBcAPL-2nD

3 Odpowiedź przez Bekon 2019-01-02 10:50:31

Odp: Openwrt na Mikrotik RBcAPL-2nD

4 Odpowiedź przez Bekon 2019-01-02 16:24:57

Odp: Openwrt na Mikrotik RBcAPL-2nD

5 Odpowiedź przez Bekon 2019-01-02 17:27:20

Odp: Openwrt na Mikrotik RBcAPL-2nD

6 Odpowiedź przez Cezary 2019-01-02 18:03:14

Odp: Openwrt na Mikrotik RBcAPL-2nD

7 Odpowiedź przez Bekon 2019-01-02 18:07:41

Odp: Openwrt na Mikrotik RBcAPL-2nD

8 Odpowiedź przez Cezary 2019-01-02 18:10:26

Odp: Openwrt na Mikrotik RBcAPL-2nD

9 Odpowiedź przez Bekon 2019-01-02 18:15:06

Odp: Openwrt na Mikrotik RBcAPL-2nD

10 Odpowiedź przez Cezary 2019-01-02 18:18:17

Odp: Openwrt na Mikrotik RBcAPL-2nD

11 Odpowiedź przez Bekon 2019-01-02 18:20:20

Odp: Openwrt na Mikrotik RBcAPL-2nD

12 Odpowiedź przez Cezary 2019-01-02 18:23:25

Odp: Openwrt na Mikrotik RBcAPL-2nD

13 Odpowiedź przez Bekon 2019-01-02 19:07:10

Odp: Openwrt na Mikrotik RBcAPL-2nD

14 Odpowiedź przez Cezary 2019-01-02 19:08:16

Odp: Openwrt na Mikrotik RBcAPL-2nD

15 Odpowiedź przez corsair 2024-07-24 09:34:03

Odp: Openwrt na Mikrotik RBcAPL-2nD

16 Odpowiedź przez Cezary 2024-07-24 09:39:28

Odp: Openwrt na Mikrotik RBcAPL-2nD

17 Odpowiedź przez corsair 2024-07-24 17:55:23

Odp: Openwrt na Mikrotik RBcAPL-2nD

18 Odpowiedź przez Cezary 2024-07-24 17:57:09

Odp: Openwrt na Mikrotik RBcAPL-2nD

19 Odpowiedź przez corsair 2024-07-24 18:06:38

Odp: Openwrt na Mikrotik RBcAPL-2nD

20 Odpowiedź przez Cezary 2024-07-24 18:10:26

Odp: Openwrt na Mikrotik RBcAPL-2nD

21 Odpowiedź przez Cezary 2024-07-24 18:14:02

Odp: Openwrt na Mikrotik RBcAPL-2nD

22 Odpowiedź przez corsair 2024-07-24 19:12:21 (edytowany przez corsair 2024-07-24 20:11:12)

Odp: Openwrt na Mikrotik RBcAPL-2nD

23 Odpowiedź przez Cezary 2024-07-24 20:39:46

Odp: Openwrt na Mikrotik RBcAPL-2nD

24 Odpowiedź przez corsair 2024-07-24 22:15:59

Odp: Openwrt na Mikrotik RBcAPL-2nD

Posty: 24