1 Temat przez mgrlukasz (edytowany przez mgrlukasz 2019-10-13 18:05:43)

  • Zarejestrowany: 2015-05-01
  • Posty: 182

Temat: Netgear R6220 instalacje OpenWrt

Witam

Proszę o szybką instrumentację jak zainstalować OpenWrt na routerze R6220

Do pobrania są następujące obrazy. 

luci-18.06-snapshot-r7301-55bbd8293c-ramips-mt7621-r6220-initramfs-kernel.bin    2018-09-08 13:06    5.9M
luci-18.06-snapshot-r7301-55bbd8293c-ramips-mt7621-r6220-squashfs-kernel.bin    2018-09-08 13:05    1.9M
luci-18.06-snapshot-r7301-55bbd8293c-ramips-mt7621-r6220-squashfs-rootfs.bin    2018-09-08 13:06    6.0M
luci-18.06-snapshot-r7301-55bbd8293c-ramips-mt7621-r6220-squashfs-sysupgrade.tar    2018-09-08 13:05    6.8M

Niestety router Netgear R6220 ma dużo słabsze WIFi od TP-LINK WDR 4300.

Czy da się powrócić do oryginalnego softu?

Z góry dzięki za info

Na przyszłość Instalujemy z tych plików

luci-19.07-snapshot-r10532-cf3b50377e-ramips-mt7621-r6220-squashfs-kernel.bin
luci-19.07-snapshot-r10532-cf3b50377e-ramips-mt7621-r6220-squashfs-rootfs.bin
Netgear R6220

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 106,413

Odp: Netgear R6220 instalacje OpenWrt

Tu jest opisana instalacja: https://github.com/openwrt/openwrt/comm … 9cfc8cf267

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez viper_lasser

  • Zarejestrowany: 2011-01-18
  • Posty: 2,544

Odp: Netgear R6220 instalacje OpenWrt

Ile flashu jest w tym routerze ?
U nie po wgraniu oficjalnej wersji z tej strony tj 18.06 wyświetla się że flashu ma tylko niby 16MB

 -----------------------------------------------------------------------------
 |                                                                           |
 | OpenWrt 18.06-SNAPSHOT, r7355-47f68ca586                                  |
 |                                                                           |
 | Build time: 2018-10-20 15:22 CEST                                         |
 | Cezary Jackiewicz (obsy), http://eko.one.pl                               |
 |                                                                           |
 -----------------------------------------------------------------------------
 | Machine: Netgear R6220                                                    |
 | Uptime: 0d, 09:48:58                                                      |
 | Load: 0.01 0.01 0.00                                                      |
 | Flash: total: 16.0MB, free: 15.0MB, used: 1%                              |
 | Memory: total: 121.1MB, free: 93.8MB, used: 22%                           |
 | WAN: 192.168.1.9, proto: dhcp                                             |
 | LAN: 192.168.10.1, leases: 0                                              |
 -----------------------------------------------------------------------------
root@OpenWrt:~#

Router kupiłem ze słynnej aukcji gdzie ktoś miał 500 sztuk używek.

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 106,413

Odp: Netgear R6220 instalacje OpenWrt

Zobacz jak podział partycji wygląda: https://github.com/openwrt/openwrt/blob … /R6220.dts

Tam 60MB leży jako zarezerwowane.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez viper_lasser

  • Zarejestrowany: 2011-01-18
  • Posty: 2,544

Odp: Netgear R6220 instalacje OpenWrt

Aż tak się na tym nie znam, 16MB na podstawowe luci + obsługa usb to i tak dużo
Z poniższego wpisu wychodzi na to że jeszcze ok 15MB flasha mam.

root@OpenWrt:~# df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                 5.0M      5.0M         0 100% /rom
tmpfs                    60.6M    248.0K     60.3M   0% /tmp
/dev/ubi0_1              16.0M    124.0K     15.0M   1% /overlay
overlayfs:/overlay       16.0M    124.0K     15.0M   1% /
tmpfs                   512.0K         0    512.0K   0% /dev
root@OpenWrt:~#

6 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 106,413

Odp: Netgear R6220 instalacje OpenWrt

free: 15.0MB, used: 1% , tak.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

7 Odpowiedź przez viper_lasser (edytowany przez viper_lasser 2018-12-02 21:32:48)

  • Zarejestrowany: 2011-01-18
  • Posty: 2,544

Odp: Netgear R6220 instalacje OpenWrt

Z tego co zdążyłem się zorientować to developerzy domyślnie zostawiają taki sam rozkład partycji żeby później można było z poziomu przeglądarki zrobić przywrotkę do oryginalnego firmware'u.

https://forum.openwrt.org/t/tutorial-bu … space/5989

Edit: Lepiej pozmieniać układ partycji w dts'ie czy spróbować użyć poniższego skryptu ?
https://github.com/prudy/lede/blob/mast … llflash.sh

8 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 106,413

Odp: Netgear R6220 instalacje OpenWrt

Ale ktoś zakręcił sprawę. przez dts zmieniaj.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

9 Odpowiedź przez viper_lasser

  • Zarejestrowany: 2011-01-18
  • Posty: 2,544

Odp: Netgear R6220 instalacje OpenWrt

Ok czyli wystarczy jak zmienię ten wpis

    factory: partition@2e00000 {
        label = "factory";
        reg = <0x2e00000 0x100000>;
        read-only;
    };

    partition@4200000 {
        label = "reserved";
        reg = <0x4200000 0x3c00000>;
        read-only;
};

na coś takiego ?

    factory: partition@2e00000 {
        label = "factory";
        reg = <0x2e00000 0x3d00000>;
        read-only;
    };

    partition@4200000 {
        label = "reserved";
        reg = <0x6b00000 0x0000000>;
        read-only;
};

10 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 106,413

Odp: Netgear R6220 instalacje OpenWrt

Nie.
- ubi masz zmienić, nie factory
- reserved w ogóle wyrzucasz
- zauważ że najpierw jest ubi, późnij factory na końcu reserved. Jak chcesz zmienić to najpierw dane z factory fizycznie przerzucasz na koniec flash żebyś nie stracił tego, potem zmieniasz dts i dopiero flashujesz.
- jak to zrobić to musisz pamiętać żeby każde flashowanie wykonywać zmodyfikowanych softem bo jak wgrasz normalny to pewnie radio nie wstanie.
- lepiej żebyś sobie zrobił kopię factory w razie czego.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

11 Odpowiedź przez viper_lasser

  • Zarejestrowany: 2011-01-18
  • Posty: 2,544

Odp: Netgear R6220 instalacje OpenWrt

Cy ten układ partycji będzie ok ?

&nand {
    status = "okay";

    partition@0 {
        label = "u-boot";
        reg = <0x0 0x100000>;
        read-only;
    };

    partition@100000 {
        label = "SC PID";
        reg = <0x100000 0x100000>;
        read-only;
    };

    partition@200000 {
        label = "kernel";
        reg = <0x200000 0x400000>;
    };

    partition@600000 {
        label = "ubi";
        reg = <0x600000 0x7700000>;
    };

    factory: partition@2e00000 {
        label = "factory";
        reg = <0x7d00000 0x100000>;
        read-only;
    };

};


W jaki sposób przenieść dane z partycji factory ?
Czym flashować nowy obraz, jakim zmodyfikowanym softem ?

12 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 106,413

Odp: Netgear R6220 instalacje OpenWrt

1c00000 (ubi) + 3c00000 (reserved) = 5800000 a nie 7700000. Jak to liczyłeś?

Przez uboot lub odpowiednio zmodyfikuj openwrt żeby miał partycje i przenieś w jedną na drugą. Zastanawiam się czy jednak tym samym nie dojdziesz do takiego samego ideologicznie skryptu który już pokazałeś.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

13 Odpowiedź przez viper_lasser

  • Zarejestrowany: 2011-01-18
  • Posty: 2,544

Odp: Netgear R6220 instalacje OpenWrt

Myślałem że jeśli obszar reserved zaczyna się od 0x4200000 i zajmuje 0x3c00000 co łącznie daje 0x7e00000 - 0x100000 = 0x7d00000
i tym samym zyskam ponad 120MB zamiast 90

14 Odpowiedź przez viper_lasser

  • Zarejestrowany: 2011-01-18
  • Posty: 2,544

Odp: Netgear R6220 instalacje OpenWrt

Czy po podmianie pliku dts z partycjami wystarczy żeby przekompilować jeszcze raz obraz i wgrać ten obraz do routera np sysupgrade czy jednak poprzez tftpd ?
Czy przy kompilacji muszę czyścić buildy np make clean ?
Jak najlepiej to zrobić żeby nie wywalić wifi w kosmos ?
Gdzieś na openwrt krążą informacje o tym że są 3 wydania tego routera z różnym rozkładem partycji.

15 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 106,413

Odp: Netgear R6220 instalacje OpenWrt

Przez tftp, bo ubi musi się od nowa zrobić.
Nie, nie musisz czyścić buildu.
Zacznij od backupu całego flash, żebyś w razie czego miał do jak wrócić.

PS. A nie wystarczy że podmontujesz ten wolny obszar jako overlay lub inny katalog gdzie będziesz trzymał dane?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

16 Odpowiedź przez batorencjusz

  • Zarejestrowany: 2015-07-16
  • Posty: 251

Odp: Netgear R6220 instalacje OpenWrt

Czy jest gdzieś dostępny gotowy obraz z zwiększonymi partycjami?

17 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 106,413

Odp: Netgear R6220 instalacje OpenWrt

Z tego co mi wiadomo to nie, tym bardziej że po zmianach partycji standardowy soft nie będzie chodził i musisz pilnować żeby mieć cały czas ten zmieniony.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

18 Odpowiedź przez roratoga

  • Skąd: Pruszków/Częstochowa
  • Zarejestrowany: 2013-05-30
  • Posty: 649

Odp: Netgear R6220 instalacje OpenWrt

czy wgranie openwrt na ten router dodaje opcje filtracji po mac ?

19 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 106,413

Odp: Netgear R6220 instalacje OpenWrt

Jak każdy openwrt - tak.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

20 Odpowiedź przez viper_lasser

  • Zarejestrowany: 2011-01-18
  • Posty: 2,544

Odp: Netgear R6220 instalacje OpenWrt

Skompilowałem i wgrałem swój firmware ze zmienionym dts'em i niby na początku miałem więcej flasha ale po jakimś czasie już do routera nie mogłem się dostać. Nawet po restarcie.
Router postawiłem na nogi przywracając oryginalny firmware tym narzędziem
https://github.com/jclehner/nmrpflash
ale chyba wygląda na to że w tym routerze z flashem (pozyskaniem dodatkowego miejsca) aż tak łatwo nie będzie...

21 Odpowiedź przez vip

  • vip
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-05-26
  • Posty: 34

Odp: Netgear R6220 instalacje OpenWrt

A próbowałeś chociaż mtd5 podmontować jako overlay?

22 Odpowiedź przez secam7

  • secam7
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-02-19
  • Posty: 349

Odp: Netgear R6220 instalacje OpenWrt

Jako że mój R6220 ma problem z wifi 2.4 na oficjalnym firmware, to musiałem skompilować swoją wersję.
Przy okazji zmieniłem układ partycji (powiększyłem ubi).
Teraz się zastanawiam jak wgrać ten firmware, sysupgrade, tftp??
Jak tftp to jakiego pliku użyć jak są takie:

openwrt-ramips-mt7621-r6220-initramfs-kernel.bin
openwrt-ramips-mt7621-r6220-squashfs-kernel.bin
openwrt-ramips-mt7621-r6220-squashfs-rootfs.bin
openwrt-ramips-mt7621-r6220-squashfs-sysupgrade.tar

23 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 106,413

Odp: Netgear R6220 instalacje OpenWrt

Nawet nie masz się nad czym zastanawiać smile

openwrt-ramips-mt7621-r6220-initramfs-kernel.bin <- służy do uruchomienia obrazu w ramie
openwrt-ramips-mt7621-r6220-squashfs-kernel.bin <- to jest kernel, sam kernel
openwrt-ramips-mt7621-r6220-squashfs-rootfs.bin <- to jest system plików
openwrt-ramips-mt7621-r6220-squashfs-sysupgrade.tar <- a to służy do aktualizacji obrazy z działającego openwrt

więc interesują cie pliki z kernel/rootfs jak wgrywasz na czysto.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

24 Odpowiedź przez secam7

  • secam7
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-02-19
  • Posty: 349

Odp: Netgear R6220 instalacje OpenWrt

Niestety to znalazłem już po moich eksperymentach z powiększaniem ubi:
https://forum.openwrt.org/t/netgear-r62 … tion/10889

Dlatego zrobiłem sobie tylko kopię z oryginalnego softu partycji "Factory",
no i obecnie ani na oryginalnym sofcie, ani na openwrt nie mam prawidłowych/oryginalnych mac .
Może ktoś ma dostęp do takiego Netgear R6220 i skopiuje dla mnie z firmowego softu:

mtd10: 00100000 00020000 "Factory"
mtd11: 00100000 00020000 "SC Private Data"
mtd15: 00200000 00020000 "SC Nvram"

Pomożecie??

Dzięki temu spróbuję jakoś skleić coś pasującego do mojego egzemplarza.

25 Odpowiedź przez karolinka

  • Zarejestrowany: 2018-04-02
  • Posty: 30

Odp: Netgear R6220 instalacje OpenWrt

Witam.
Zakupiłam ten router ze słynnej aukcji za 99 zł-wgrany najnowszy 18.06-SNAPSHOT.
Niby wszystko gra, jest internet po wifi i po kablu.
Niestety są też błędy w logach.
"Bać się ich, czy zignorować?

root@OpenWrt:~# logread
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    0.000000] Linux version 4.14.109 (er2de2@Lenovo) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7628-61323d22c0)) #0 SMP Fri Mar 29 17:04:39 2019
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] MIPS: machine is Netgear R6220
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] Determined physical RAM map:
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000]  memory: 08000000 @ 00000000 (usable)
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] VPE topology {2} total 2
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] Zone ranges:
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000]   HighMem  empty
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] Movable zone start for each node
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] Early memory node ranges
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    0.000000] On node 0 totalpages: 32768
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 80552020, node_mem_map 81003000
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    0.000000]   Normal zone: 256 pages used for memmap
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    0.000000]   Normal zone: 32768 pages, LIFO batch:7
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    0.000000] random: get_random_bytes called from 0x80555740 with crng_init=0
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] percpu: Embedded 14 pages/cpu @8110f000 s26256 r8192 d22896 u57344
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    0.000000] pcpu-alloc: s26256 r8192 d22896 u57344 alloc=14*4096
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] Writing ErrCtl register=00041450
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] Readback ErrCtl register=00041450
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] Memory: 123780K/131072K available (4639K kernel code, 236K rwdata, 572K rodata, 236K init, 254K bss, 7292K reserved, 0K cma-reserved, 0K highmem)
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] Hierarchical RCU implementation.
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000]       RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] NR_IRQS: 256
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.015491] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.087799] pid_max: default: 32768 minimum: 301
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.097097] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.110114] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.125634] Hierarchical SRCU implementation.
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.134886] smp: Bringing up secondary CPUs ...
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    0.144363] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    0.144372] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    0.144383] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.144513] CPU1 revision is: 0001992f (MIPS 1004Kc)
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.204377] Synchronize counters for CPU 1: done.
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.264040] smp: Brought up 1 node, 2 CPUs
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.275507] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.294976] futex hash table entries: 512 (order: 2, 16384 bytes)
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.307195] pinctrl core: initialized pinctrl subsystem
Mon Apr  1 15:51:52 2019 kern.info kernel: [    0.318117] NET: Registered protocol family 16
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    0.333538] FPU Affinity set after 11720 emulations
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    0.334367] pull PCIe RST: RALINK_RSTCTRL = 0
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    0.643319] release PCIe RST: RALINK_RSTCTRL = 7000000
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    0.653392] ***** Xtal 40MHz *****
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    0.660115] release PCIe RST: RALINK_RSTCTRL = 7000000
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    0.670323] Port 0 N_FTS = 1b105000
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    0.677218] Port 1 N_FTS = 1b102800
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    0.684143] Port 2 N_FTS = 1b105000
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    1.842597] PCIE1 no card, disable it(RST&CLK)
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    1.851289]  -> 12007f2
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    1.856105] PCIE0 enabled
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    1.861302] PCIE2 enabled
Mon Apr  1 15:51:52 2019 kern.info kernel: [    1.866484] PCI host bridge /pcie@1e140000 ranges:
Mon Apr  1 15:51:52 2019 kern.info kernel: [    1.876013]  MEM 0x0000000060000000..0x000000006fffffff
Mon Apr  1 15:51:52 2019 kern.info kernel: [    1.886366]   IO 0x000000001e160000..0x000000001e16ffff
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    1.896737] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
Mon Apr  1 15:51:52 2019 kern.info kernel: [    1.922704] mt7621_gpio 1e000600.gpio: registering 32 gpios
Mon Apr  1 15:51:52 2019 kern.info kernel: [    1.934178] mt7621_gpio 1e000600.gpio: registering 32 gpios
Mon Apr  1 15:51:52 2019 kern.info kernel: [    1.945392] mt7621_gpio 1e000600.gpio: registering 32 gpios
Mon Apr  1 15:51:52 2019 kern.info kernel: [    1.957709] PCI host bridge to bus 0000:00
Mon Apr  1 15:51:52 2019 kern.info kernel: [    1.965736] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    1.979389] pci_bus 0000:00: root bus resource [io  0xffffffff]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    1.991126] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.004608] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    2.020377] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    2.020418] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    2.020430] pci 0000:00:00.0: reg 0x14: [mem 0x60300000-0x6030ffff]
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    2.020493] pci 0000:00:00.0: supports D1
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    2.020502] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    2.020781] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    2.020819] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    2.020840] pci 0000:00:01.0: reg 0x14: [mem 0x60310000-0x6031ffff]
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    2.020911] pci 0000:00:01.0: supports D1
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    2.020925] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    2.021432] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    2.021501] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    2.021559] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    2.021658] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    2.021863] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    2.022114] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    2.022175] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    2.022322] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    2.022549] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    2.022573] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.022648] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.035678] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.049493] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.062624] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.076453] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.089927] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.104271] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.117752] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.131231] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.144727] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.159234] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.173561] pci 0000:00:00.0: PCI bridge to [bus 01]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.183402] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.196893] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.211238] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.224715] pci 0000:00:01.0: PCI bridge to [bus 02]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.234548] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.249625] clocksource: Switched to clocksource GIC
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.261039] NET: Registered protocol family 2
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.270416] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.284152] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.296762] TCP: Hash tables configured (established 1024 bind 1024)
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.309481] UDP hash table entries: 256 (order: 1, 8192 bytes)
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.320977] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.333612] NET: Registered protocol family 1
Mon Apr  1 15:51:52 2019 kern.debug kernel: [    2.342191] PCI: CLS 0 bytes, default 32
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.579572] 4 CPUs re-calibrate udelay(lpj = 2924544)
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    2.590625] Crashlog allocated RAM at address 0x3f00000
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.601243] workingset: timestamp_bits=30 max_order=15 bucket_order=0
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.622256] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.633758] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.657025] io scheduler noop registered
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.664763] io scheduler deadline registered (default)
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.675928] gpio-export gpio_export: 1 gpio(s) exported
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.687121] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.703517] console [ttyS0] disabled
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.710600] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 14, base_baud = 3125000) is a 16550A
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.728505] console [ttyS0] enabled
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.742301] bootconsole [early0] disabled
Mon Apr  1 15:51:52 2019 kern.err kernel: [    2.759002] cacheinfo: Failed to find cpu0 device node
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    2.769282] cacheinfo: Unable to detect cache hierarchy for CPU 0
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    2.782346] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    2.796338] Enable NFI Clock
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    2.802115] # MTK NAND # : Use HW ECC
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.809407] Device not found, ID: c2f1
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    2.816861] Not Support this Device!
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    2.824321] chip_mode=00000001
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    2.830399] Support this Device in MTK table! c2f1
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    2.840288] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.853153] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.865795] nand: Macronix NAND 128MiB 3,3V 8-bit
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.875156] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Mon Apr  1 15:51:52 2019 kern.info kernel: [    2.890240] Scanning device for bad blocks
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    3.064211] Bad eraseblock 700 at 0x000005780000
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    3.149929] 6 fixed-partitions partitions found on MTD device MT7621-NAND
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    3.163439] Creating 6 MTD partitions on "MT7621-NAND":
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    3.173844] 0x000000000000-0x000000100000 : "u-boot"
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    3.184871] 0x000000100000-0x000000200000 : "SC PID"
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    3.195790] 0x000000200000-0x000000600000 : "kernel"
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    3.206765] 0x000000600000-0x000002200000 : "ubi"
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    3.217357] 0x000002e00000-0x000002f00000 : "factory"
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    3.228484] 0x000004200000-0x000007e00000 : "reserved"
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    3.240281] [mtk_nand] probe successfully!
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    3.249128] Signature matched and data read!
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    3.257626] load_fact_bbt success 1023
Mon Apr  1 15:51:52 2019 kern.info kernel: [    3.265852] libphy: Fixed MDIO Bus: probed
Mon Apr  1 15:51:52 2019 kern.info kernel: [    3.342186] libphy: mdio: probed
Mon Apr  1 15:51:52 2019 kern.info kernel: [    4.748220] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
Mon Apr  1 15:51:52 2019 kern.info kernel: [    4.760752] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 16
Mon Apr  1 15:51:52 2019 kern.info kernel: [    4.780138] NET: Registered protocol family 10
Mon Apr  1 15:51:52 2019 kern.info kernel: [    4.790363] Segment Routing with IPv6
Mon Apr  1 15:51:52 2019 kern.info kernel: [    4.797729] NET: Registered protocol family 17
Mon Apr  1 15:51:52 2019 kern.info kernel: [    4.806698] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Mon Apr  1 15:51:52 2019 kern.info kernel: [    4.832493] 8021q: 802.1Q VLAN Support v1.8
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    4.844050] UBI: auto-attach mtd3
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    4.850696] ubi0: attaching mtd3
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    5.114374] ubi0: scanning is finished
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    5.136911] ubi0: attached mtd3 (name "ubi", size 28 MiB)
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    5.147685] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    5.161375] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    5.174883] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    5.188741] ubi0: good PEBs: 224, bad PEBs: 0, corrupted PEBs: 0
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    5.200701] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    5.215076] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 2007613359
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    5.233258] ubi0: available PEBs: 0, total reserved PEBs: 224, PEBs reserved for bad PEB handling: 20
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    5.251631] ubi0: background thread "ubi_bgt0d" started, PID 354
Mon Apr  1 15:51:52 2019 kern.info kernel: [    5.253471] block ubiblock0_0: created from ubi0:0(rootfs)
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    5.274549] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
Mon Apr  1 15:51:52 2019 kern.info kernel: [    5.288419] hctosys: unable to open rtc device (rtc0)
Mon Apr  1 15:51:52 2019 kern.info kernel: [    5.305053] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
Mon Apr  1 15:51:52 2019 kern.info kernel: [    5.319963] Freeing unused kernel memory: 236K
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    5.328810] This architecture does not have kernel memory protection.
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    5.381201] random: fast init done
Mon Apr  1 15:51:52 2019 user.info kernel: [    5.880221] init: Console is alive
Mon Apr  1 15:51:52 2019 user.info kernel: [    5.887238] init: - watchdog -
Mon Apr  1 15:51:52 2019 kern.info kernel: [    6.436424] mtk_soc_eth 1e100000.ethernet eth0: port 0 link up
Mon Apr  1 15:51:52 2019 user.info kernel: [    6.860048] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Mon Apr  1 15:51:52 2019 kern.info kernel: [    6.958954] usbcore: registered new interface driver usbfs
Mon Apr  1 15:51:52 2019 kern.info kernel: [    6.970075] usbcore: registered new interface driver hub
Mon Apr  1 15:51:52 2019 kern.info kernel: [    6.980801] usbcore: registered new device driver usb
Mon Apr  1 15:51:52 2019 kern.info kernel: [    7.014696] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    7.033982] SCSI subsystem initialized
Mon Apr  1 15:51:52 2019 kern.info kernel: [    7.044786] ehci-platform: EHCI generic platform driver
Mon Apr  1 15:51:52 2019 kern.info kernel: [    7.062902] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
Mon Apr  1 15:51:52 2019 kern.info kernel: [    7.073575] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
Mon Apr  1 15:51:52 2019 kern.info kernel: [    7.099812] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
Mon Apr  1 15:51:52 2019 kern.info kernel: [    7.118133] xhci-mtk 1e1c0000.xhci: irq 15, io mem 0x1e1c0000
Mon Apr  1 15:51:52 2019 kern.info kernel: [    7.130625] hub 1-0:1.0: USB hub found
Mon Apr  1 15:51:52 2019 kern.info kernel: [    7.138164] hub 1-0:1.0: 2 ports detected
Mon Apr  1 15:51:52 2019 kern.info kernel: [    7.146811] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
Mon Apr  1 15:51:52 2019 kern.info kernel: [    7.157444] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
Mon Apr  1 15:51:52 2019 kern.info kernel: [    7.172374] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0  SuperSpeed
Mon Apr  1 15:51:52 2019 kern.info kernel: [    7.185387] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Mon Apr  1 15:51:52 2019 kern.info kernel: [    7.202420] hub 2-0:1.0: USB hub found
Mon Apr  1 15:51:52 2019 kern.info kernel: [    7.209989] hub 2-0:1.0: 1 port detected
Mon Apr  1 15:51:52 2019 kern.info kernel: [    7.223581] usbcore: registered new interface driver usb-storage
Mon Apr  1 15:51:52 2019 kern.info kernel: [    7.237029] usbcore: registered new interface driver uas
Mon Apr  1 15:51:52 2019 user.info kernel: [    7.247879] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Mon Apr  1 15:51:52 2019 user.info kernel: [    7.280084] init: - preinit -
Mon Apr  1 15:51:52 2019 kern.info kernel: [    7.799743] usb 1-2: new high-speed USB device number 2 using xhci-mtk
Mon Apr  1 15:51:52 2019 kern.info kernel: [    8.013696] mtk_soc_eth 1e100000.ethernet: PPE started
Mon Apr  1 15:51:52 2019 kern.info kernel: [    8.099450] hub 1-2:1.0: USB hub found
Mon Apr  1 15:51:52 2019 kern.info kernel: [    8.107609] hub 1-2:1.0: 4 ports detected
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    8.118293] random: procd: uninitialized urandom read (4 bytes read)
Mon Apr  1 15:51:52 2019 kern.info kernel: [    8.439622] usb 1-2.2: new high-speed USB device number 3 using xhci-mtk
Mon Apr  1 15:51:52 2019 kern.info kernel: [    8.657510] usb-storage 1-2.2:1.2: USB Mass Storage device detected
Mon Apr  1 15:51:52 2019 kern.info kernel: [    8.670520] scsi host0: usb-storage 1-2.2:1.2
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    9.750922] scsi 0:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
Mon Apr  1 15:51:52 2019 kern.warn kernel: [    9.769471] sd 0:0:0:0: [sda] Optimal transfer size 0 bytes < PAGE_SIZE (4096 bytes)
Mon Apr  1 15:51:52 2019 kern.notice kernel: [    9.786324] sd 0:0:0:0: [sda] Attached SCSI removable disk
Mon Apr  1 15:51:52 2019 user.info kernel: [   11.263674] mount_root: loading kmods from internal overlay
Mon Apr  1 15:51:52 2019 user.info kernel: [   11.293273] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Mon Apr  1 15:51:52 2019 user.info kernel: [   11.308542] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Mon Apr  1 15:51:52 2019 kern.notice kernel: [   11.728367] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 500
Mon Apr  1 15:51:52 2019 kern.notice kernel: [   11.801263] UBIFS (ubi0:1): recovery needed
Mon Apr  1 15:51:52 2019 kern.notice kernel: [   11.951326] UBIFS (ubi0:1): recovery completed
Mon Apr  1 15:51:52 2019 kern.notice kernel: [   11.960325] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Mon Apr  1 15:51:52 2019 kern.notice kernel: [   11.975914] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Mon Apr  1 15:51:52 2019 kern.notice kernel: [   11.995655] UBIFS (ubi0:1): FS size: 21078016 bytes (20 MiB, 166 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
Mon Apr  1 15:51:52 2019 kern.notice kernel: [   12.016258] UBIFS (ubi0:1): reserved for root: 995566 bytes (972 KiB)
Mon Apr  1 15:51:52 2019 kern.notice kernel: [   12.029086] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 1679E461-F1D6-472C-A4F1-2503CE2778B6, small LPT model
Mon Apr  1 15:51:52 2019 user.info kernel: [   12.053645] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Mon Apr  1 15:51:52 2019 user.info kernel: [   12.076367] block: extroot: not configured
Mon Apr  1 15:51:52 2019 kern.notice kernel: [   12.129856] UBIFS (ubi0:1): un-mount UBI device 0
Mon Apr  1 15:51:52 2019 kern.notice kernel: [   12.139236] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
Mon Apr  1 15:51:52 2019 kern.notice kernel: [   12.157567] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 503
Mon Apr  1 15:51:52 2019 kern.notice kernel: [   12.328569] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Mon Apr  1 15:51:52 2019 kern.notice kernel: [   12.344220] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Mon Apr  1 15:51:52 2019 kern.notice kernel: [   12.363964] UBIFS (ubi0:1): FS size: 21078016 bytes (20 MiB, 166 LEBs), journal size 1015809 bytes (0 MiB, 8 LEBs)
Mon Apr  1 15:51:52 2019 kern.notice kernel: [   12.384567] UBIFS (ubi0:1): reserved for root: 995566 bytes (972 KiB)
Mon Apr  1 15:51:52 2019 kern.notice kernel: [   12.397396] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 1679E461-F1D6-472C-A4F1-2503CE2778B6, small LPT model
Mon Apr  1 15:51:52 2019 user.info kernel: [   12.629316] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
Mon Apr  1 15:51:52 2019 user.info kernel: [   12.650946] block: extroot: not configured
Mon Apr  1 15:51:52 2019 user.info kernel: [   12.702428] mount_root: switching to ubifs overlay
Mon Apr  1 15:51:52 2019 user.warn kernel: [   12.739376] urandom-seed: Seeding with /etc/urandom.seed
Mon Apr  1 15:51:52 2019 kern.info kernel: [   12.821973] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
Mon Apr  1 15:51:52 2019 user.info kernel: [   12.843681] procd: - early -
Mon Apr  1 15:51:52 2019 user.info kernel: [   12.849508] procd: - watchdog -
Mon Apr  1 15:51:52 2019 kern.notice kernel: [   13.315666] random: jshn: uninitialized urandom read (4 bytes read)
Mon Apr  1 15:51:52 2019 kern.notice kernel: [   13.475919] random: jshn: uninitialized urandom read (4 bytes read)
Mon Apr  1 15:51:52 2019 user.info kernel: [   13.529903] procd: - watchdog -
Mon Apr  1 15:51:52 2019 user.info kernel: [   13.536554] procd: - ubus -
Mon Apr  1 15:51:52 2019 kern.notice kernel: [   13.557364] random: ubusd: uninitialized urandom read (4 bytes read)
Mon Apr  1 15:51:52 2019 user.info kernel: [   13.604113] procd: - init -
Mon Apr  1 15:51:52 2019 user.info kernel: [   14.162766] kmodloader: loading kernel modules from /etc/modules.d/*
Mon Apr  1 15:51:52 2019 kern.info kernel: [   14.193721] ip6_tables: (C) 2000-2006 Netfilter Core Team
Mon Apr  1 15:51:52 2019 kern.info kernel: [   14.215983] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
Mon Apr  1 15:51:52 2019 kern.info kernel: [   14.232031] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Mon Apr  1 15:51:52 2019 kern.info kernel: [   14.248117] ip_tables: (C) 2000-2006 Netfilter Core Team
Mon Apr  1 15:51:52 2019 kern.info kernel: [   14.268433] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
Mon Apr  1 15:51:52 2019 kern.info kernel: [   14.341071] xt_time: kernel timezone is -0000
Mon Apr  1 15:51:52 2019 kern.info kernel: [   14.382970] cdc_ether 1-2.2:1.0 eth1: register 'cdc_ether' at usb-1e1c0000.xhci-2.2, CDC Ethernet Device, 0c:5b:8f:27:9a:64
Mon Apr  1 15:51:52 2019 kern.info kernel: [   14.405679] usbcore: registered new interface driver cdc_ether
Mon Apr  1 15:51:52 2019 kern.warn kernel: [   14.500173] bus=0x2, slot = 0x1, irq=0xff
Mon Apr  1 15:51:52 2019 kern.info kernel: [   14.508391] mt7603e 0000:02:00.0: ASIC revision: 76030010
Mon Apr  1 15:51:52 2019 kern.info kernel: [   15.550877] mt7603e 0000:02:00.0: Firmware Version: ap_pcie
Mon Apr  1 15:51:52 2019 kern.info kernel: [   15.562053] mt7603e 0000:02:00.0: Build Time: 20160107100755
Mon Apr  1 15:51:52 2019 kern.info kernel: [   15.609625] mt7603e 0000:02:00.0: firmware init done
Mon Apr  1 15:51:52 2019 kern.debug kernel: [   15.784950] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Mon Apr  1 15:51:52 2019 kern.warn kernel: [   15.803002] bus=0x1, slot = 0x0, irq=0xff
Mon Apr  1 15:51:52 2019 kern.info kernel: [   15.811294] mt76x2e 0000:01:00.0: ASIC revision: 76120044
Mon Apr  1 15:51:52 2019 kern.info kernel: [   16.480218] mt76x2e 0000:01:00.0: ROM patch build: 20141115060606a
Mon Apr  1 15:51:52 2019 kern.info kernel: [   16.495919] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
Mon Apr  1 15:51:52 2019 kern.info kernel: [   16.506875] mt76x2e 0000:01:00.0: Build: 1
Mon Apr  1 15:51:52 2019 kern.info kernel: [   16.515033] mt76x2e 0000:01:00.0: Build Time: 201507311614____
Mon Apr  1 15:51:52 2019 kern.info kernel: [   16.549629] mt76x2e 0000:01:00.0: Firmware running!
Mon Apr  1 15:51:52 2019 kern.debug kernel: [   16.560704] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Mon Apr  1 15:51:52 2019 kern.info kernel: [   16.572747] PPP generic driver version 2.4.2
Mon Apr  1 15:51:52 2019 kern.info kernel: [   16.584326] NET: Registered protocol family 24
Mon Apr  1 15:51:52 2019 user.info kernel: [   16.597343] kmodloader: done loading kernel modules from /etc/modules.d/*
Mon Apr  1 15:51:53 2019 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Mon Apr  1 15:51:53 2019 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Mon Apr  1 15:51:53 2019 daemon.info dnsmasq[1170]: started, version 2.80 cachesize 150
Mon Apr  1 15:51:53 2019 daemon.info dnsmasq[1170]: DNS service limited to local subnets
Mon Apr  1 15:51:53 2019 daemon.info dnsmasq[1170]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Mon Apr  1 15:51:53 2019 daemon.info dnsmasq[1170]: using local addresses only for domain test
Mon Apr  1 15:51:53 2019 daemon.info dnsmasq[1170]: using local addresses only for domain onion
Mon Apr  1 15:51:53 2019 daemon.info dnsmasq[1170]: using local addresses only for domain localhost
Mon Apr  1 15:51:53 2019 daemon.info dnsmasq[1170]: using local addresses only for domain local
Mon Apr  1 15:51:53 2019 daemon.info dnsmasq[1170]: using local addresses only for domain invalid
Mon Apr  1 15:51:53 2019 daemon.info dnsmasq[1170]: using local addresses only for domain bind
Mon Apr  1 15:51:53 2019 daemon.info dnsmasq[1170]: using local addresses only for domain lan
Mon Apr  1 15:51:53 2019 daemon.warn dnsmasq[1170]: no servers found in /tmp/resolv.conf.auto, will retry
Mon Apr  1 15:51:53 2019 daemon.info dnsmasq[1170]: read /etc/hosts - 4 addresses
Mon Apr  1 15:51:53 2019 daemon.info dnsmasq[1170]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Mon Apr  1 15:51:53 2019 authpriv.info dropbear[1197]: Not backgrounding
Mon Apr  1 15:51:55 2019 user.notice : Added device handler type: tunnel
Mon Apr  1 15:51:55 2019 user.notice : Added device handler type: Network device
Mon Apr  1 15:51:55 2019 user.notice : Added device handler type: bridge
Mon Apr  1 15:51:55 2019 user.notice : Added device handler type: veth
Mon Apr  1 15:51:55 2019 user.notice : Added device handler type: macvlan
Mon Apr  1 15:51:55 2019 user.notice : Added device handler type: 8021ad
Mon Apr  1 15:51:55 2019 user.notice : Added device handler type: 8021q
Mon Apr  1 15:51:56 2019 daemon.err block: /dev/ubiblock0_0 is already mounted on /rom
Mon Apr  1 15:51:56 2019 daemon.err block: /dev/ubi0_1 is already mounted on /overlay
Mon Apr  1 15:51:57 2019 daemon.notice procd: /etc/rc.d/S96led: setting up led wan
Mon Apr  1 15:51:57 2019 daemon.notice procd: /etc/rc.d/S96led: setting up led wifi
Mon Apr  1 15:51:57 2019 daemon.notice procd: /etc/rc.d/S96led: setting up led USB
Mon Apr  1 15:51:57 2019 kern.info kernel: [   22.853029] mtk_soc_eth 1e100000.ethernet: PPE started
Mon Apr  1 15:51:57 2019 kern.info kernel: [   22.869444] device eth0 entered promiscuous mode
Mon Apr  1 15:51:58 2019 kern.info kernel: [   22.885951] br-lan: port 1(eth0.1) entered blocking state
Mon Apr  1 15:51:58 2019 kern.info kernel: [   22.897148] br-lan: port 1(eth0.1) entered disabled state
Mon Apr  1 15:51:58 2019 kern.info kernel: [   22.908416] device eth0.1 entered promiscuous mode
Mon Apr  1 15:51:58 2019 kern.info kernel: [   22.924588] br-lan: port 1(eth0.1) entered blocking state
Mon Apr  1 15:51:58 2019 kern.info kernel: [   22.935432] br-lan: port 1(eth0.1) entered forwarding state
Mon Apr  1 15:51:58 2019 kern.info kernel: [   22.946969] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Mon Apr  1 15:51:58 2019 daemon.notice netifd: Interface 'lan' is enabled
Mon Apr  1 15:51:58 2019 daemon.notice netifd: Interface 'lan' is setting up now
Mon Apr  1 15:51:58 2019 daemon.notice netifd: Interface 'lan' is now up
Mon Apr  1 15:51:58 2019 daemon.notice netifd: Interface 'loopback' is enabled
Mon Apr  1 15:51:58 2019 daemon.notice netifd: Interface 'loopback' is setting up now
Mon Apr  1 15:51:58 2019 daemon.notice netifd: Interface 'loopback' is now up
Mon Apr  1 15:51:58 2019 daemon.notice netifd: Interface 'wan' is enabled
Mon Apr  1 15:51:58 2019 kern.err kernel: [   22.984038] cdc_ether 1-2.2:1.0 eth1: kevent 12 may have been dropped
Mon Apr  1 15:51:58 2019 kern.err kernel: [   22.985403] cdc_ether 1-2.2:1.0 eth1: kevent 11 may have been dropped
Mon Apr  1 15:51:58 2019 daemon.notice netifd: Interface 'wan6' is enabled
Mon Apr  1 15:51:58 2019 daemon.notice netifd: bridge 'br-lan' link is up
Mon Apr  1 15:51:58 2019 daemon.notice netifd: Interface 'lan' has link connectivity
Mon Apr  1 15:51:58 2019 daemon.notice netifd: Network device 'eth0' link is up
Mon Apr  1 15:51:58 2019 daemon.notice netifd: VLAN 'eth0.1' link is up
Mon Apr  1 15:51:58 2019 daemon.notice netifd: Network device 'lo' link is up
Mon Apr  1 15:51:58 2019 daemon.notice netifd: Interface 'loopback' has link connectivity
Mon Apr  1 15:51:58 2019 daemon.notice netifd: Network device 'eth1' link is up
Mon Apr  1 15:51:58 2019 daemon.notice netifd: Interface 'wan' has link connectivity
Mon Apr  1 15:51:58 2019 daemon.notice netifd: Interface 'wan' is setting up now
Mon Apr  1 15:51:58 2019 daemon.notice netifd: VLAN 'eth0.2' link is up
Mon Apr  1 15:51:58 2019 daemon.notice netifd: Interface 'wan6' has link connectivity
Mon Apr  1 15:51:58 2019 daemon.notice netifd: Interface 'wan6' is setting up now
Mon Apr  1 15:51:58 2019 daemon.notice netifd: wan (1491): udhcpc: started, v1.28.4
Mon Apr  1 15:51:58 2019 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Mon Apr  1 15:51:58 2019 daemon.err odhcp6c[1495]: Failed to send RS (Address not available)
Mon Apr  1 15:51:59 2019 kern.info kernel: [   23.910213] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Mon Apr  1 15:51:59 2019 daemon.notice netifd: wan (1491): udhcpc: sending discover
Mon Apr  1 15:51:59 2019 daemon.info procd: - init complete -
Mon Apr  1 15:51:59 2019 daemon.notice netifd: wan (1491): udhcpc: sending select for 192.168.8.100
Mon Apr  1 15:51:59 2019 daemon.notice netifd: wan (1491): udhcpc: lease of 192.168.8.100 obtained, lease time 86400
Mon Apr  1 15:51:59 2019 daemon.notice netifd: Interface 'wan' is now up
Mon Apr  1 15:51:59 2019 daemon.info dnsmasq[1170]: reading /tmp/resolv.conf.auto
Mon Apr  1 15:51:59 2019 daemon.info dnsmasq[1170]: using local addresses only for domain test
Mon Apr  1 15:51:59 2019 daemon.info dnsmasq[1170]: using local addresses only for domain onion
Mon Apr  1 15:51:59 2019 daemon.info dnsmasq[1170]: using local addresses only for domain localhost
Mon Apr  1 15:51:59 2019 daemon.info dnsmasq[1170]: using local addresses only for domain local
Mon Apr  1 15:51:59 2019 daemon.info dnsmasq[1170]: using local addresses only for domain invalid
Mon Apr  1 15:51:59 2019 daemon.info dnsmasq[1170]: using local addresses only for domain bind
Mon Apr  1 15:51:59 2019 daemon.info dnsmasq[1170]: using local addresses only for domain lan
Mon Apr  1 15:51:59 2019 daemon.info dnsmasq[1170]: using nameserver 8.8.8.8#53
Mon Apr  1 15:51:59 2019 daemon.info dnsmasq[1170]: using nameserver 8.8.4.4#53
Mon Apr  1 15:52:00 2019 user.notice firewall: Reloading firewall due to ifup of wan (eth1)
Mon Apr  1 15:52:00 2019 user.notice mac80211: Failed command: iw phy phy1 set antenna all all
Mon Apr  1 15:52:00 2019 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Mon Apr  1 15:52:01 2019 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Mon Apr  1 15:52:01 2019 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Mon Apr  1 15:52:01 2019 kern.info kernel: [   26.477503] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Mon Apr  1 15:52:01 2019 kern.info kernel: [   26.499012] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mon Apr  1 15:52:01 2019 kern.info kernel: [   26.511381] br-lan: port 2(wlan1) entered blocking state
Mon Apr  1 15:52:01 2019 kern.info kernel: [   26.522158] br-lan: port 2(wlan1) entered disabled state
Mon Apr  1 15:52:01 2019 kern.info kernel: [   26.533344] device wlan1 entered promiscuous mode
Mon Apr  1 15:52:01 2019 kern.info kernel: [   26.548659] br-lan: port 3(wlan0) entered blocking state
Mon Apr  1 15:52:01 2019 kern.info kernel: [   26.559363] br-lan: port 3(wlan0) entered disabled state
Mon Apr  1 15:52:01 2019 kern.info kernel: [   26.570594] device wlan0 entered promiscuous mode
Mon Apr  1 15:52:01 2019 kern.info kernel: [   26.580402] br-lan: port 3(wlan0) entered blocking state
Mon Apr  1 15:52:01 2019 kern.info kernel: [   26.591060] br-lan: port 3(wlan0) entered forwarding state
Mon Apr  1 15:52:01 2019 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Mon Apr  1 15:52:01 2019 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Mon Apr  1 15:52:01 2019 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->HT_SCAN
Mon Apr  1 15:52:01 2019 daemon.err hostapd: Using interface wlan0 with hwaddr 9c:3d:cf:c7:16:18 and ssid "Netgear_R6220"
Mon Apr  1 15:52:01 2019 daemon.err hostapd: Using interface wlan1 with hwaddr 9c:3d:cf:c7:16:1c and ssid "Netgear_R6220"
Mon Apr  1 15:52:02 2019 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->ENABLED
Mon Apr  1 15:52:02 2019 daemon.notice hostapd: wlan0: AP-ENABLED
Mon Apr  1 15:52:02 2019 kern.info kernel: [   27.002521] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mon Apr  1 15:52:02 2019 daemon.notice netifd: Network device 'wlan0' link is up
Mon Apr  1 15:52:02 2019 kern.info kernel: [   27.667200] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Mon Apr  1 15:52:02 2019 kern.info kernel: [   27.680181] br-lan: port 2(wlan1) entered blocking state
Mon Apr  1 15:52:02 2019 kern.info kernel: [   27.690810] br-lan: port 2(wlan1) entered forwarding state
Mon Apr  1 15:52:02 2019 daemon.notice hostapd: wlan1: interface state HT_SCAN->ENABLED
Mon Apr  1 15:52:02 2019 daemon.notice hostapd: wlan1: AP-ENABLED
Mon Apr  1 15:52:02 2019 daemon.notice netifd: Network device 'wlan1' link is up
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[1170]: exiting on receipt of SIGTERM
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: started, version 2.80 cachesize 150
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: DNS service limited to local subnets
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq-dhcp[2130]: DHCP, IP range 192.168.2.100 -- 192.168.2.249, lease time 12h
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain test
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain onion
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain localhost
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain local
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain invalid
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain bind
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain lan
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: reading /tmp/resolv.conf.auto
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain test
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain onion
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain localhost
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain local
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain invalid
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain bind
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: using local addresses only for domain lan
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: using nameserver 8.8.8.8#53
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: using nameserver 8.8.4.4#53
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: read /etc/hosts - 4 addresses
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq-dhcp[2130]: read /etc/ethers - 0 addresses
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: read /etc/hosts - 4 addresses
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq[2130]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Mon Apr  1 17:50:19 2019 daemon.info dnsmasq-dhcp[2130]: read /etc/ethers - 0 addresses
Mon Apr  1 17:50:23 2019 daemon.info dnsmasq-dhcp[2130]: DHCPDISCOVER(br-lan) 192.168.2.249 f0:76:1c:d4:5b:ee
Mon Apr  1 17:50:23 2019 daemon.info dnsmasq-dhcp[2130]: DHCPOFFER(br-lan) 192.168.2.100 f0:76:1c:d4:5b:ee
Mon Apr  1 17:50:23 2019 daemon.info dnsmasq-dhcp[2130]: DHCPREQUEST(br-lan) 192.168.2.100 f0:76:1c:d4:5b:ee
Mon Apr  1 17:50:23 2019 daemon.info dnsmasq-dhcp[2130]: DHCPACK(br-lan) 192.168.2.100 f0:76:1c:d4:5b:ee Lenovo
Mon Apr  1 17:50:26 2019 daemon.info hostapd: wlan1: STA f4:60:e2:cb:e6:de IEEE 802.11: authenticated
Mon Apr  1 17:50:26 2019 daemon.info hostapd: wlan1: STA f4:60:e2:cb:e6:de IEEE 802.11: associated (aid 1)
Mon Apr  1 17:50:26 2019 daemon.notice hostapd: wlan1: AP-STA-CONNECTED f4:60:e2:cb:e6:de
Mon Apr  1 17:50:26 2019 daemon.info hostapd: wlan1: STA f4:60:e2:cb:e6:de WPA: pairwise key handshake completed (RSN)
Mon Apr  1 17:50:29 2019 daemon.info dnsmasq-dhcp[2130]: DHCPDISCOVER(br-lan) f4:60:e2:cb:e6:de
Mon Apr  1 17:50:29 2019 daemon.info dnsmasq-dhcp[2130]: DHCPOFFER(br-lan) 192.168.2.142 f4:60:e2:cb:e6:de
Mon Apr  1 17:50:29 2019 daemon.info dnsmasq-dhcp[2130]: DHCPREQUEST(br-lan) 192.168.2.142 f4:60:e2:cb:e6:de
Mon Apr  1 17:50:29 2019 daemon.info dnsmasq-dhcp[2130]: DHCPACK(br-lan) 192.168.2.142 f4:60:e2:cb:e6:de
Mon Apr  1 17:50:42 2019 authpriv.info dropbear[2186]: Child connection from 192.168.2.100:44313
Mon Apr  1 17:50:49 2019 authpriv.notice dropbear[2186]: Password auth succeeded for 'root' from 192.168.2.100:44313
Mon Apr  1 17:50:52 2019 kern.notice kernel: [   61.595656] random: crng init done
Mon Apr  1 17:50:52 2019 kern.notice kernel: [   61.602437] random: 6 urandom warning(s) missed due to ratelimiting
Netgear R6220 + HUAWEI E3372 Hilink