przez konsole rozumiem RS232 do płyty
To mam ale w domu bede za kilka godzin .

Opisz co zrobić.

BTW. Wlasnie breedem zaladowalem padawana i padavan jest OK.

Nigdy nie robilem czarów jak niżej:

cd /extdisks/sda1 (can be different if you remove and reinsert the usb stick)
mtd write lede-ramips-mt7621-mir3g-squashfs-kernel1.bin kernel1
mtd write lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin rootfs0
nvram set flag_try_sys1_failed=1
nvram commit
reboot

łopatologicznie: co to ubifrmat i jak tego użyc? Nie robilem tego wczesniej wiec to nowe calkiem dla mnie.

Linur to moj natywny OS ale zagadnień openwrt nie robilem

To robie z shella routera czy z uboota po RS232?
Robić to po załadowaniu openwrt czy przed (jeszcze na padavanie)?

A dobra widze cat /proc/mtd na padavanie nie zwraca mtd9 wiec to trzeba na openwrt

I bez zmian:
Zrobione /ubiformat /dev/mtd9 na openwrt z łączonych plików i wgranym przez breeda, potem zaladowanie od nowa openwrt z breeda i nadpisanie z sysupgrade
Wifi nie ma...

root@OpenWrt:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00080000 00020000 "Bootloader"
mtd1: 00040000 00020000 "Config"
mtd2: 00040000 00020000 "Bdata"
mtd3: 00040000 00020000 "Factory"
mtd4: 00040000 00020000 "crash"
mtd5: 00040000 00020000 "crash_syslog"
mtd6: 00040000 00020000 "reserved0"
mtd7: 00400000 00020000 "kernel_stock"
mtd8: 00400000 00020000 "kernel"
mtd9: 07580000 00020000 "ubi"
root@OpenWrt:~# ubiformat /dev/mtd9
ubiformat: mtd9 (nand), size 123207680 bytes (117.5 MiB), 940 eraseblocks of 131072 bytes (128.0 KiB), min. I/O size 2048 bytes
libscan: scanning eraseblock 939 -- 100 % complete
ubiformat: 755 eraseblocks have valid erase counter, mean value is 0
ubiformat: 100 eraseblocks are supposedly empty
ubiformat: warning!: 85 of 940 eraseblocks contain non-UBI data
ubiformat: continue? (y/N) y
ubiformat: warning!: only 755 of 940 eraseblocks have valid erase counter
ubiformat: mean erase counter 0 will be used for the rest of eraseblock
ubiformat: continue? (y/N) y
ubiformat: use erase counter 0 for all eraseblocks
ubiformat: formatting eraseblock 939 -- 100 % complete

root@OpenWrt:~# uci show wireless
uci: Entry not found
root@OpenWrt:~# logread
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    0.000000] Linux version 4.14.63 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 SMP Thu Aug 16 07:51:15 2018
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] MIPS: machine is Xiaomi Mi Router 3G
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] Determined physical RAM map:
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000]  memory: 10000000 @ 00000000 (usable)
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] VPE topology {2,2} total 4
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] Zone ranges:
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000]   HighMem  empty
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] Movable zone start for each node
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] Early memory node ranges
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    0.000000] On node 0 totalpages: 65536
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 80545e80, node_mem_map 81003000
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    0.000000]   Normal zone: 512 pages used for memmap
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    0.000000]   Normal zone: 65536 pages, LIFO batch:15
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    0.000000] random: get_random_bytes called from 0x80549740 with crng_init=0
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] percpu: Embedded 14 pages/cpu @81210000 s26256 r8192 d22896 u57344
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    0.000000] pcpu-alloc: s26256 r8192 d22896 u57344 alloc=14*4096
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65024
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] Writing ErrCtl register=00008160
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] Readback ErrCtl register=00008160
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] Memory: 252064K/262144K available (4596K kernel code, 239K rwdata, 564K rodata, 1820K init, 270K bss, 10080K reserved, 0K cma-reserved, 0K highmem)
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] Hierarchical RCU implementation.
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] NR_IRQS: 256
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.000010] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.007814] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.073975] pid_max: default: 32768 minimum: 301
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.078745] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.085253] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.094051] Hierarchical SRCU implementation.
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.099187] smp: Bringing up secondary CPUs ...
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    5.547294] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    5.547304] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    5.547316] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Fri Aug 17 09:44:47 2018 kern.info kernel: [    5.547454] CPU1 revision is: 0001992f (MIPS 1004Kc)
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.163935] Synchronize counters for CPU 1: done.
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    5.574532] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    5.574541] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    5.574551] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Fri Aug 17 09:44:47 2018 kern.info kernel: [    5.574620] CPU2 revision is: 0001992f (MIPS 1004Kc)
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.254991] Synchronize counters for CPU 2: done.
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    5.663825] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    5.663833] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    5.663841] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Fri Aug 17 09:44:47 2018 kern.info kernel: [    5.663922] CPU3 revision is: 0001992f (MIPS 1004Kc)
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.340173] Synchronize counters for CPU 3: done.
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.370035] smp: Brought up 1 node, 4 CPUs
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.377788] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.387569] futex hash table entries: 1024 (order: 3, 32768 bytes)
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.393867] pinctrl core: initialized pinctrl subsystem
Fri Aug 17 09:44:47 2018 kern.info kernel: [    0.399699] NET: Registered protocol family 16
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    0.409943] Can't analyze schedule() prologue at 80478bc4
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    0.415305] FPU Affinity set after 11720 emulations
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    0.416038] pull PCIe RST: RALINK_RSTCTRL = 0
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    0.720716] release PCIe RST: RALINK_RSTCTRL = 7000000
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    0.725765] ***** Xtal 40MHz *****
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    0.729120] release PCIe RST: RALINK_RSTCTRL = 7000000
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    0.734217] Port 0 N_FTS = 1b105000
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    0.737685] Port 1 N_FTS = 1b105000
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    0.741130] Port 2 N_FTS = 1b102800
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    1.896269] PCIE2 no card, disable it(RST&CLK)
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    1.900628]  -> 21007f2
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    1.903033] PCIE0 enabled
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    1.905622] PCIE1 enabled
Fri Aug 17 09:44:47 2018 kern.info kernel: [    1.908224] PCI host bridge /pcie@1e140000 ranges:
Fri Aug 17 09:44:47 2018 kern.info kernel: [    1.913001]  MEM 0x0000000060000000..0x000000006fffffff
Fri Aug 17 09:44:47 2018 kern.info kernel: [    1.918155]   IO 0x000000001e160000..0x000000001e16ffff
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    1.923359] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
Fri Aug 17 09:44:47 2018 kern.info kernel: [    1.939653] mt7621_gpio 1e000600.gpio: registering 32 gpios
Fri Aug 17 09:44:47 2018 kern.info kernel: [    1.945512] mt7621_gpio 1e000600.gpio: registering 32 gpios
Fri Aug 17 09:44:47 2018 kern.info kernel: [    1.951246] mt7621_gpio 1e000600.gpio: registering 32 gpios
Fri Aug 17 09:44:47 2018 kern.info kernel: [    1.958166] PCI host bridge to bus 0000:00
Fri Aug 17 09:44:47 2018 kern.info kernel: [    1.962209] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    1.969036] pci_bus 0000:00: root bus resource [io  0xffffffff]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    1.974889] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    1.981648] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    1.989538] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    1.989579] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    1.989591] pci 0000:00:00.0: reg 0x14: [mem 0x60300000-0x6030ffff]
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    1.989658] pci 0000:00:00.0: supports D1
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    1.989667] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    1.989945] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    1.989980] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    1.989997] pci 0000:00:01.0: reg 0x14: [mem 0x60310000-0x6031ffff]
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    1.990063] pci 0000:00:01.0: supports D1
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    1.990073] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    1.990562] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    1.990619] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    1.990752] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    1.990964] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    1.991204] pci 0000:02:00.0: [14c3:7662] type 00 class 0x028000
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    1.991270] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    1.991319] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    1.991416] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    1.991630] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    1.991698] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
Fri Aug 17 09:44:47 2018 kern.info kernel: [    1.991777] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    1.998290] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.005224] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.011764] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.018695] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.025424] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.032178] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff pref]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.039333] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.046094] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.052816] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.059563] pci 0000:00:00.0: PCI bridge to [bus 01]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.064477] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.071238] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.078483] pci 0000:02:00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff pref]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.085657] pci 0000:00:01.0: PCI bridge to [bus 02]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.090563] pci 0000:00:01.0:   bridge window [mem 0x60100000-0x601fffff]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.097315] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff pref]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.105878] clocksource: Switched to clocksource GIC
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.112422] NET: Registered protocol family 2
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.117568] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.124452] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.130877] TCP: Hash tables configured (established 2048 bind 2048)
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.137278] UDP hash table entries: 256 (order: 1, 8192 bytes)
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.143044] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.149514] NET: Registered protocol family 1
Fri Aug 17 09:44:47 2018 kern.debug kernel: [    2.153839] PCI: CLS 0 bytes, default 32
Fri Aug 17 09:44:47 2018 kern.info kernel: [    3.765840] 4 CPUs re-calibrate udelay(lpj = 2924544)
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    3.772315] Crashlog allocated RAM at address 0x3f00000
Fri Aug 17 09:44:47 2018 kern.info kernel: [    3.777677] workingset: timestamp_bits=30 max_order=16 bucket_order=0
Fri Aug 17 09:44:47 2018 kern.info kernel: [    3.791411] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Fri Aug 17 09:44:47 2018 kern.info kernel: [    3.797277] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    3.808790] random: fast init done
Fri Aug 17 09:44:47 2018 kern.info kernel: [    3.813983] io scheduler noop registered
Fri Aug 17 09:44:47 2018 kern.info kernel: [    3.817840] io scheduler deadline registered (default)
Fri Aug 17 09:44:47 2018 kern.info kernel: [    3.823549] gpio-export gpio_export: 1 gpio(s) exported
Fri Aug 17 09:44:47 2018 kern.info kernel: [    3.829629] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Fri Aug 17 09:44:47 2018 kern.info kernel: [    3.839655] console [ttyS0] disabled
Fri Aug 17 09:44:47 2018 kern.info kernel: [    3.843202] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 18, base_baud = 3125000) is a 16550A
Fri Aug 17 09:44:47 2018 kern.info kernel: [    3.852212] console [ttyS0] enabled
Fri Aug 17 09:44:47 2018 kern.info kernel: [    3.859087] bootconsole [early0] disabled
Fri Aug 17 09:44:47 2018 kern.err kernel: [    3.867895] cacheinfo: Failed to find cpu0 device node
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    3.873015] cacheinfo: Unable to detect cache hierarchy for CPU 0
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    3.880016] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    3.887177] Enable NFI Clock
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    3.890047] # MTK NAND # : Use HW ECC
Fri Aug 17 09:44:47 2018 kern.info kernel: [    3.893707] Device found in MTK table, ID: c8d1, EXT_ID: 809540
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    3.899618] Support this Device in MTK table! c8d1
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    3.904565] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
Fri Aug 17 09:44:47 2018 kern.info kernel: [    3.911053] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xd1
Fri Aug 17 09:44:47 2018 kern.info kernel: [    3.917391] nand: ESMT NAND 128MiB 3,3V 8-bit
Fri Aug 17 09:44:47 2018 kern.info kernel: [    3.921728] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Fri Aug 17 09:44:47 2018 kern.info kernel: [    3.929298] Scanning device for bad blocks
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    4.077821] 10 fixed-partitions partitions found on MTD device MT7621-NAND
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    4.084662] Creating 10 MTD partitions on "MT7621-NAND":
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    4.089973] 0x000000000000-0x000000080000 : "Bootloader"
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    4.096473] 0x000000080000-0x0000000c0000 : "Config"
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    4.102434] 0x0000000c0000-0x000000100000 : "Bdata"
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    4.108371] 0x000000100000-0x000000140000 : "Factory"
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    4.114455] 0x000000140000-0x000000180000 : "crash"
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    4.120427] 0x000000180000-0x0000001c0000 : "crash_syslog"
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    4.127033] 0x0000001c0000-0x000000200000 : "reserved0"
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    4.133260] 0x000000200000-0x000000600000 : "kernel_stock"
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    4.139891] 0x000000600000-0x000000a00000 : "kernel"
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    4.145981] 0x000000a00000-0x000007f80000 : "ubi"
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    4.152667] [mtk_nand] probe successfully!
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    4.157516] Signature matched and data read!
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    4.161762] load_fact_bbt success 1023
Fri Aug 17 09:44:47 2018 kern.info kernel: [    4.166357] libphy: Fixed MDIO Bus: probed
Fri Aug 17 09:44:47 2018 kern.info kernel: [    4.238447] libphy: mdio: probed
Fri Aug 17 09:44:47 2018 kern.info kernel: [    5.652459] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
Fri Aug 17 09:44:47 2018 kern.info kernel: [    5.659115] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20
Fri Aug 17 09:44:47 2018 kern.info kernel: [    5.669997] NET: Registered protocol family 10
Fri Aug 17 09:44:47 2018 kern.info kernel: [    5.676099] Segment Routing with IPv6
Fri Aug 17 09:44:47 2018 kern.info kernel: [    5.679860] NET: Registered protocol family 17
Fri Aug 17 09:44:47 2018 kern.info kernel: [    5.684347] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Fri Aug 17 09:44:47 2018 kern.info kernel: [    5.697265] 8021q: 802.1Q VLAN Support v1.8
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    5.704333] UBI: auto-attach mtd9
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    5.707710] ubi0: attaching mtd9
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    6.817289] ubi0: scanning is finished
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    6.837139] ubi0: attached mtd9 (name "ubi", size 117 MiB)
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    6.842613] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    6.849488] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    6.856262] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    6.863189] ubi0: good PEBs: 940, bad PEBs: 0, corrupted PEBs: 0
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    6.869179] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    6.876382] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1783979374
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    6.885469] ubi0: available PEBs: 0, total reserved PEBs: 940, PEBs reserved for bad PEB handling: 20
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    6.894682] ubi0: background thread "ubi_bgt0d" started, PID 387
Fri Aug 17 09:44:47 2018 kern.info kernel: [    6.896755] block ubiblock0_0: created from ubi0:0(rootfs)
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    6.896769] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
Fri Aug 17 09:44:47 2018 kern.info kernel: [    6.896789] hctosys: unable to open rtc device (rtc0)
Fri Aug 17 09:44:47 2018 kern.info kernel: [    6.924505] Freeing unused kernel memory: 1820K
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    6.929071] This architecture does not have kernel memory protection.
Fri Aug 17 09:44:47 2018 user.info kernel: [    6.947882] init: Console is alive
Fri Aug 17 09:44:47 2018 user.info kernel: [    6.951515] init: - watchdog -
Fri Aug 17 09:44:47 2018 user.info kernel: [    6.965223] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Fri Aug 17 09:44:47 2018 user.info kernel: [    6.976315] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Fri Aug 17 09:44:47 2018 user.info kernel: [    6.986229] init: - preinit -
Fri Aug 17 09:44:47 2018 kern.info kernel: [    7.110350] mtk_soc_eth 1e100000.ethernet: PPE started
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    7.133863] random: procd: uninitialized urandom read (4 bytes read)
Fri Aug 17 09:44:47 2018 kern.info kernel: [    7.541540] mtk_soc_eth 1e100000.ethernet eth0: port 2 link up
Fri Aug 17 09:44:47 2018 kern.info kernel: [   10.246211] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
Fri Aug 17 09:44:47 2018 user.info kernel: [   10.260584] procd: - early -
Fri Aug 17 09:44:47 2018 user.info kernel: [   10.263562] procd: - watchdog -
Fri Aug 17 09:44:47 2018 user.info kernel: [   10.886023] procd: - watchdog -
Fri Aug 17 09:44:47 2018 user.info kernel: [   10.889470] procd: - ubus -
Fri Aug 17 09:44:47 2018 kern.notice kernel: [   10.897466] random: ubusd: uninitialized urandom read (4 bytes read)
Fri Aug 17 09:44:47 2018 kern.notice kernel: [   10.946606] random: ubusd: uninitialized urandom read (4 bytes read)
Fri Aug 17 09:44:47 2018 kern.notice kernel: [   10.953306] random: ubusd: uninitialized urandom read (4 bytes read)
Fri Aug 17 09:44:47 2018 user.info kernel: [   10.960527] procd: - init -
Fri Aug 17 09:44:47 2018 user.info kernel: [   11.089698] kmodloader: loading kernel modules from /etc/modules.d/*
Fri Aug 17 09:44:47 2018 kern.info kernel: [   11.098931] ip6_tables: (C) 2000-2006 Netfilter Core Team
Fri Aug 17 09:44:47 2018 kern.info kernel: [   11.431203] ip_tables: (C) 2000-2006 Netfilter Core Team
Fri Aug 17 09:44:47 2018 kern.info kernel: [   11.770023] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
Fri Aug 17 09:44:47 2018 kern.info kernel: [   11.995902] xt_time: kernel timezone is -0000
Fri Aug 17 09:44:47 2018 kern.info kernel: [   12.199266] PPP generic driver version 2.4.2
Fri Aug 17 09:44:47 2018 kern.info kernel: [   12.204728] NET: Registered protocol family 24
Fri Aug 17 09:44:47 2018 user.info kernel: [   12.211396] kmodloader: done loading kernel modules from /etc/modules.d/*
Fri Aug 17 09:44:47 2018 kern.warn kernel: [   13.316941] urandom_read: 5 callbacks suppressed
Fri Aug 17 09:44:47 2018 kern.notice kernel: [   13.316951] random: jshn: uninitialized urandom read (4 bytes read)
Fri Aug 17 09:44:48 2018 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Fri Aug 17 09:44:48 2018 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Fri Aug 17 09:44:48 2018 daemon.info dnsmasq[866]: started, version 2.80test3 cachesize 150
Fri Aug 17 09:44:48 2018 daemon.info dnsmasq[866]: DNS service limited to local subnets
Fri Aug 17 09:44:48 2018 daemon.info dnsmasq[866]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Fri Aug 17 09:44:48 2018 daemon.info dnsmasq[866]: using local addresses only for domain test
Fri Aug 17 09:44:48 2018 daemon.info dnsmasq[866]: using local addresses only for domain onion
Fri Aug 17 09:44:48 2018 daemon.info dnsmasq[866]: using local addresses only for domain localhost
Fri Aug 17 09:44:48 2018 daemon.info dnsmasq[866]: using local addresses only for domain local
Fri Aug 17 09:44:48 2018 daemon.info dnsmasq[866]: using local addresses only for domain invalid
Fri Aug 17 09:44:48 2018 daemon.info dnsmasq[866]: using local addresses only for domain bind
Fri Aug 17 09:44:48 2018 daemon.info dnsmasq[866]: using local addresses only for domain lan
Fri Aug 17 09:44:48 2018 daemon.warn dnsmasq[866]: no servers found in /tmp/resolv.conf.auto, will retry
Fri Aug 17 09:44:48 2018 daemon.info dnsmasq[866]: read /etc/hosts - 4 addresses
Fri Aug 17 09:44:48 2018 daemon.info dnsmasq[866]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Fri Aug 17 09:44:50 2018 user.notice : Added device handler type: tunnel
Fri Aug 17 09:44:50 2018 user.notice : Added device handler type: Network device
Fri Aug 17 09:44:50 2018 user.notice : Added device handler type: bridge
Fri Aug 17 09:44:50 2018 user.notice : Added device handler type: veth
Fri Aug 17 09:44:50 2018 user.notice : Added device handler type: macvlan
Fri Aug 17 09:44:50 2018 user.notice : Added device handler type: 8021ad
Fri Aug 17 09:44:50 2018 user.notice : Added device handler type: 8021q
Fri Aug 17 09:44:51 2018 kern.info kernel: [   18.531070] mtk_soc_eth 1e100000.ethernet: PPE started
Fri Aug 17 09:44:51 2018 kern.info kernel: [   18.542755] device eth0 entered promiscuous mode
Fri Aug 17 09:44:51 2018 kern.info kernel: [   18.550593] br-lan: port 1(eth0.1) entered blocking state
Fri Aug 17 09:44:51 2018 kern.info kernel: [   18.556052] br-lan: port 1(eth0.1) entered disabled state
Fri Aug 17 09:44:51 2018 kern.info kernel: [   18.562156] device eth0.1 entered promiscuous mode
Fri Aug 17 09:44:51 2018 kern.info kernel: [   18.571119] br-lan: port 1(eth0.1) entered blocking state
Fri Aug 17 09:44:51 2018 kern.info kernel: [   18.576555] br-lan: port 1(eth0.1) entered forwarding state
Fri Aug 17 09:44:51 2018 kern.info kernel: [   18.582604] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Fri Aug 17 09:44:51 2018 daemon.notice netifd: Interface 'lan' is enabled
Fri Aug 17 09:44:51 2018 daemon.notice netifd: Interface 'lan' is setting up now
Fri Aug 17 09:44:51 2018 daemon.notice netifd: Interface 'lan' is now up
Fri Aug 17 09:44:51 2018 daemon.notice netifd: Interface 'loopback' is enabled
Fri Aug 17 09:44:51 2018 daemon.notice netifd: Interface 'loopback' is setting up now
Fri Aug 17 09:44:51 2018 daemon.notice netifd: Interface 'loopback' is now up
Fri Aug 17 09:44:51 2018 daemon.notice netifd: Interface 'wan' is enabled
Fri Aug 17 09:44:51 2018 daemon.notice netifd: Interface 'wan6' is enabled
Fri Aug 17 09:44:51 2018 daemon.notice netifd: bridge 'br-lan' link is up
Fri Aug 17 09:44:51 2018 daemon.notice netifd: Interface 'lan' has link connectivity
Fri Aug 17 09:44:51 2018 daemon.notice netifd: Network device 'eth0' link is up
Fri Aug 17 09:44:51 2018 daemon.notice netifd: VLAN 'eth0.1' link is up
Fri Aug 17 09:44:51 2018 daemon.notice netifd: Network device 'lo' link is up
Fri Aug 17 09:44:51 2018 daemon.notice netifd: Interface 'loopback' has link connectivity
Fri Aug 17 09:44:51 2018 daemon.notice netifd: VLAN 'eth0.2' link is up
Fri Aug 17 09:44:51 2018 daemon.notice netifd: Interface 'wan' has link connectivity
Fri Aug 17 09:44:51 2018 daemon.notice netifd: Interface 'wan' is setting up now
Fri Aug 17 09:44:51 2018 daemon.notice netifd: Interface 'wan6' has link connectivity
Fri Aug 17 09:44:51 2018 daemon.notice netifd: Interface 'wan6' is setting up now
Fri Aug 17 09:44:51 2018 daemon.notice netifd: wan (1101): udhcpc: started, v1.28.3
Fri Aug 17 09:44:51 2018 daemon.err odhcp6c[1102]: Failed to send RS (Address not available)
Fri Aug 17 09:44:51 2018 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Fri Aug 17 09:44:51 2018 daemon.notice netifd: wan (1101): udhcpc: sending discover
Fri Aug 17 09:44:51 2018 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp
Fri Aug 17 09:44:51 2018 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/radvd
Fri Aug 17 09:44:52 2018 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network
Fri Aug 17 09:44:52 2018 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash
Fri Aug 17 09:44:52 2018 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos
Fri Aug 17 09:44:52 2018 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd
Fri Aug 17 09:44:52 2018 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd
Fri Aug 17 09:44:52 2018 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Fri Aug 17 09:44:52 2018 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Fri Aug 17 09:44:52 2018 kern.info kernel: [   19.566236] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Fri Aug 17 09:44:52 2018 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics
Fri Aug 17 09:44:52 2018 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp
Fri Aug 17 09:44:52 2018 daemon.err odhcp6c[1102]: Failed to send DHCPV6 message to ff02::1:2 (Address not available)
Fri Aug 17 09:44:53 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led WAN (amber)
Fri Aug 17 09:44:53 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led LAN1 (amber)
Fri Aug 17 09:44:53 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led LAN2 (amber)
Fri Aug 17 09:44:53 2018 daemon.info procd: - init complete -
Fri Aug 17 09:44:53 2018 kern.notice kernel: [   20.615756] random: crng init done
Fri Aug 17 09:44:53 2018 daemon.info urandom_seed[1435]: Seed saved (/etc/urandom.seed)
Fri Aug 17 09:44:55 2018 daemon.notice netifd: wan (1101): udhcpc: sending discover
Fri Aug 17 09:44:56 2018 daemon.info dnsmasq[866]: exiting on receipt of SIGTERM
Fri Aug 17 09:44:56 2018 authpriv.info dropbear[1505]: Not backgrounding
Fri Aug 17 09:44:56 2018 daemon.info dnsmasq[1504]: started, version 2.80test3 cachesize 150
Fri Aug 17 09:44:56 2018 daemon.info dnsmasq[1504]: DNS service limited to local subnets
Fri Aug 17 09:44:56 2018 daemon.info dnsmasq[1504]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Fri Aug 17 09:44:56 2018 daemon.info dnsmasq-dhcp[1504]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Fri Aug 17 09:44:56 2018 daemon.info dnsmasq[1504]: using local addresses only for domain test
Fri Aug 17 09:44:56 2018 daemon.info dnsmasq[1504]: using local addresses only for domain onion
Fri Aug 17 09:44:56 2018 daemon.info dnsmasq[1504]: using local addresses only for domain localhost
Fri Aug 17 09:44:56 2018 daemon.info dnsmasq[1504]: using local addresses only for domain local
Fri Aug 17 09:44:56 2018 daemon.info dnsmasq[1504]: using local addresses only for domain invalid
Fri Aug 17 09:44:56 2018 daemon.info dnsmasq[1504]: using local addresses only for domain bind
Fri Aug 17 09:44:56 2018 daemon.info dnsmasq[1504]: using local addresses only for domain lan
Fri Aug 17 09:44:56 2018 daemon.warn dnsmasq[1504]: no servers found in /tmp/resolv.conf.auto, will retry
Fri Aug 17 09:44:56 2018 daemon.info dnsmasq[1504]: read /etc/hosts - 4 addresses
Fri Aug 17 09:44:56 2018 daemon.info dnsmasq[1504]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Fri Aug 17 09:44:56 2018 daemon.info dnsmasq-dhcp[1504]: read /etc/ethers - 0 addresses
Fri Aug 17 09:44:56 2018 daemon.info dnsmasq[1504]: read /etc/hosts - 4 addresses
Fri Aug 17 09:44:56 2018 daemon.info dnsmasq[1504]: read /tmp/hosts/dhcp.cfg01411c - 1 addresses
Fri Aug 17 09:44:56 2018 daemon.info dnsmasq-dhcp[1504]: read /etc/ethers - 0 addresses
Fri Aug 17 09:44:58 2018 daemon.notice netifd: wan (1101): udhcpc: sending discover

Nie przywracałem do difoltów bo formatowaniu mtd9...

root@OpenWrt:~# opkg list_installed | grep kmod
kmod-gpio-button-hotplug - 4.14.63-2
kmod-ip6tables - 4.14.63-1
kmod-ipt-conntrack - 4.14.63-1
kmod-ipt-core - 4.14.63-1
kmod-ipt-nat - 4.14.63-1
kmod-ipt-offload - 4.14.63-1
kmod-leds-gpio - 4.14.63-1
kmod-lib-crc-ccitt - 4.14.63-1
kmod-nf-conntrack - 4.14.63-1
kmod-nf-conntrack6 - 4.14.63-1
kmod-nf-flow - 4.14.63-1
kmod-nf-ipt - 4.14.63-1
kmod-nf-ipt6 - 4.14.63-1
kmod-nf-nat - 4.14.63-1
kmod-nf-reject - 4.14.63-1
kmod-nf-reject6 - 4.14.63-1
kmod-ppp - 4.14.63-1
kmod-pppoe - 4.14.63-1
kmod-pppox - 4.14.63-1
kmod-slhc - 4.14.63-1

Hmmm. Obraz ze strony openwrt.org wiec wedlug mnie powinno byc bo zawsze bylo
Dokladnie 18.06.1 ladowalem kilka dni temu do TP-linka 1043ndv2 i nie bylo problemu z brakiem czegokolwiek.
Zakladam ze zrypali obraz dla xiaomi 3g

JAkich modolow brakuje dokladnie? to zaciągne moze z opkg

Podaj link do twojego obrazu

NA twoim image po flaszowaniu przez webui jest to samo

  _______                     ________        __
|       |.-----.-----.-----.|  |  |  |.----.|  |_
|   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
|_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
-----------------------------------------------------
OpenWrt 18.06.1, r7258-5eb055306f
-----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@OpenWrt:~# logread|grep mtd9
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    5.702745] UBI: auto-attach mtd9
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    5.706128] ubi0: attaching mtd9
Fri Aug 17 09:44:47 2018 kern.notice kernel: [    6.835580] ubi0: attached mtd9 (name "ubi", size 117 MiB)
root@OpenWrt:~# opkg list_installed | grep kmod
kmod-gpio-button-hotplug - 4.14.63-2
kmod-ip6tables - 4.14.63-1
kmod-ipt-conntrack - 4.14.63-1
kmod-ipt-core - 4.14.63-1
kmod-ipt-nat - 4.14.63-1
kmod-ipt-offload - 4.14.63-1
kmod-leds-gpio - 4.14.63-1
kmod-lib-crc-ccitt - 4.14.63-1
kmod-nf-conntrack - 4.14.63-1
kmod-nf-conntrack6 - 4.14.63-1
kmod-nf-flow - 4.14.63-1
kmod-nf-ipt - 4.14.63-1
kmod-nf-ipt6 - 4.14.63-1
kmod-nf-nat - 4.14.63-1
kmod-nf-reject - 4.14.63-1
kmod-nf-reject6 - 4.14.63-1
kmod-ppp - 4.14.63-1
kmod-pppoe - 4.14.63-1
kmod-pppox - 4.14.63-1
kmod-slhc - 4.14.63-1
root@OpenWrt:~#

wziolem plik

luci-18.06-snapshot-r7301-55bbd8293c-ramips-mt7621-mir3g-squashfs-sysupgrade.tar

z linka co dales
https://dl.eko.one.pl/luci/openwrt-18.06/ramips/mt7621/

Nazwy buildów nic nie mówią który jest twoj.

czy to moze miec znaczenie?

root@OpenWrt:~# logread|grep fail
Fri Aug 17 09:44:47 2018 kern.info kernel: [    1.996906] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
Fri Aug 17 09:44:47 2018 kern.info kernel: [    2.010380] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
root@OpenWrt:~# logread|grep error
Fri Aug 17 09:44:47 2018 kern.warn kernel: [    3.878448] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
root@OpenWrt:~# logread|grep problem
root@OpenWrt:~#

Nie rozumiemy się
wgralem obraz z linka co dales i w nazwie ma mir3g

Innego tam nie widze który by pasowal do xiaomi 3g i wygloadal na twoj

Podaj konkretnego  linka bo od godziny piszemy bez sensu o tym pliku

a jakim cudem mial mi sie wgrac twoj obraz skoro go nie tam gdzie wskazales?
Wziolem jedyny który tam jest w domyśle ze to twoj.
Mowisz ze nie twoj , to nie twoj - wierze ci

Podaj proszę  konkretnego linka jak dla idioty - klikam - pobieram - mam