Temat: Tvheadend
On the Tvheadend forum there was a post about Tvheadend and OpenWrt which mentioned this forum.
How do I get it installed on OpenWrt? Is there a package available?
Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Oprogramowanie / Software → Tvheadend
Zaloguj się lub zarejestruj by napisać odpowiedź
On the Tvheadend forum there was a post about Tvheadend and OpenWrt which mentioned this forum.
How do I get it installed on OpenWrt? Is there a package available?
Yes, just install via opkg.
Yes, just install via opkg.
# opkg install tvheadend
Unknown package 'tvheadend'
opkg update; opkg install tvheadend
http://downloads.lede-project.org/relea … x86_64.ipk
opkg update; opkg install tvheadend
So this is for 17.01.... whereas I am running 15.05.1. I guess I must install the latest version to be able to run Tvheadend...
Ehm... now we have 18.06-rc1...
Ehm... now we have 18.05-rc1...
Where?
http://downloads.lede-project.org/releases/18.06.0-rc1/
Bleeding edge... ![]()
Looking at:-
http://downloads.lede-project.org/relea … 6/generic/
I don't see a description of these six files, so am never sure which I need to be able to install OpenWrt...
The instructions here - https://openwrt.org/start?id=docs/guide … penwrt_x86 are not very clear.
Use combined-ext4.img.gz file, unpack, connect disk to normal PC and write image using dd (on linux systems) or winmager or sth like this.
Many thanks. I have it installed now.
Unfortunately there is no driver for my NIC - I need e1000e.
Also what is the best way to expand rootfs to use the whole partition?
opkg install kmod-e1000e? OpenWrt images does not include all drivers, just install what you need.
opkg does not work when I do not have network access. Without a driver I don't have network access.
How do I install a driver manually?
Download module to pendrive, connect drive to pc/router, mount and install via opkg install /mnt/sda1/here-full-path-to-ipk
I presume I'm looking for kmod-e1000e....
I did not find it in - https://wiki.openwrt.org/doc/packages#package_sources
Where should I look?
Eventually I solved the problem by installing my disk in an old ThinkPad T42 which can use the e1000 driver.
http://downloads.lede-project.org/relea … /packages/
How do start Tvheadend automatically on boot on OpenWrt?
/etc/init.d/tvheadend enable
Nearly there now...
I have two USB dongles:-
- Integrated Technology Express - IT9135 BDA Afatech DVB-T HDTV Dongle ID 048d:9006
- Hauppauge PCTV Systems 46ie DVB-S2 HDTV Dongle ID 2013:0258
Neither of them are seen by Tvheadend so I - just need to find some drivers....
Any idea where to look?
dvb drivers is not compiled by openwrt. Best option is compile whole system and required modules.
dvb drivers is not compiled by openwrt. Best option is compile whole system and required modules.
Where do I get code for drivers?
Exists in kernel tree. Compile system, make kernel_menuconfig and select what you need, compile again.
Exists in kernel tree. Compile system, make kernel_menuconfig and select what you need, compile again.
Do you have a guide for doing this? I'm new to OpenWrt and don't know where to find the kernel tree or how to compile the system.
Read: https://wiki.openwrt.org/doc/howto/build
Can I use OpenWrt as a host for the build system?
I have read this but it seems very complicated.
Zaloguj się lub zarejestruj by napisać odpowiedź
eko.one.pl → Oprogramowanie / Software → Tvheadend
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc