Postanowiłem wgrać LEDE Reboot 17.01-SNAPSHOT r3794-dca4dfa na Archer C2600 i nie widzę modułu wifi 2.4. Interfejs 5G działa a drugiego brak. Kilka lat nie siedziałem na openwrt ale chyba coś nie tak jest?

root@LEDE:~# uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.hwmode='11a'
wireless.radio0.path='soc/1b500000.pci/pci0000:00/0000:00:00.0/0000:01:00.0'
wireless.radio0.country='PL'
wireless.radio0.channel='auto'
wireless.radio0.htmode='VHT80'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.encryption='psk-mixed'
wireless.default_radio0.key='xxxxxxxx'
wireless.default_radio0.ssid='LEDE5G'

root@LEDE:~# rm /etc/config/wireless
root@LEDE:~# wifi config
root@LEDE:~# uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.channel='36'
wireless.radio0.hwmode='11a'
wireless.radio0.path='soc/1b500000.pci/pci0000:00/0000:00:00.0/0000:01:00.0'
wireless.radio0.htmode='VHT80'
wireless.radio0.disabled='1'
wireless.radio0.country='PL'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.ssid='LEDE'
wireless.default_radio0.encryption='none'

root@LEDE:~# opkg list_installed | grep kmod
kmod-ath - 4.4.108+2017-01-31-3
kmod-ath10k - 4.4.108+2017-01-31-3
kmod-cfg80211 - 4.4.108+2017-01-31-3
kmod-crypto-crc32c - 4.4.108-1
kmod-crypto-hash - 4.4.108-1
kmod-fs-ext4 - 4.4.108-1
kmod-fs-vfat - 4.4.108-1
kmod-fuse - 4.4.108-1
kmod-gpio-button-hotplug - 4.4.108-2
kmod-ip6tables - 4.4.108-1
kmod-ipt-conntrack - 4.4.108-1
kmod-ipt-core - 4.4.108-1
kmod-ipt-nat - 4.4.108-1
kmod-leds-gpio - 4.4.108-1
kmod-lib-crc-ccitt - 4.4.108-1
kmod-lib-crc16 - 4.4.108-1
kmod-lib-textsearch - 4.4.108-1
kmod-mac80211 - 4.4.108+2017-01-31-3
kmod-mii - 4.4.108-1
kmod-nf-conntrack - 4.4.108-1
kmod-nf-conntrack6 - 4.4.108-1
kmod-nf-ipt - 4.4.108-1
kmod-nf-ipt6 - 4.4.108-1
kmod-nf-nat - 4.4.108-1
kmod-nf-nathelper-extra - 4.4.108-1
kmod-nls-base - 4.4.108-1
kmod-nls-cp437 - 4.4.108-1
kmod-nls-iso8859-1 - 4.4.108-1
kmod-nls-utf8 - 4.4.108-1
kmod-ppp - 4.4.108-1
kmod-pppoe - 4.4.108-1
kmod-pppox - 4.4.108-1
kmod-scsi-core - 4.4.108-1
kmod-slhc - 4.4.108-1
kmod-tun - 4.4.108-1
kmod-usb-acm - 4.4.108-1
kmod-usb-core - 4.4.108-1
kmod-usb-dwc3 - 4.4.108-1
kmod-usb-dwc3-of-simple - 4.4.108-1
kmod-usb-ledtrig-usbport - 4.4.108-1
kmod-usb-net - 4.4.108-1
kmod-usb-net-cdc-ether - 4.4.108-1
kmod-usb-net-cdc-mbim - 4.4.108-1
kmod-usb-net-cdc-ncm - 4.4.108-1
kmod-usb-net-huawei-cdc-ncm - 4.4.108-1
kmod-usb-net-qmi-wwan - 4.4.108-1
kmod-usb-net-rndis - 4.4.108-1
kmod-usb-net-sierrawireless - 4.4.108-1
kmod-usb-ohci - 4.4.108-1
kmod-usb-phy-qcom-dwc3 - 4.4.108-1
kmod-usb-printer - 4.4.108-1
kmod-usb-serial - 4.4.108-1
kmod-usb-serial-option - 4.4.108-1
kmod-usb-serial-qualcomm - 4.4.108-1
kmod-usb-serial-sierrawireless - 4.4.108-1
kmod-usb-serial-wwan - 4.4.108-1
kmod-usb-storage - 4.4.108-1
kmod-usb-wdm - 4.4.108-1
kmod-usb2 - 4.4.108-1
kmod-usb3 - 4.4.108-1
root@LEDE:~# logread
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000000] Booting Linux on physical CPU 0x0
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.000000] Linux version 4.4.108 (cezary@eko.one.pl) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3784-ebb5474) ) #0 SMP Sat Dec 30 10:05:44 2017
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000000] Machine model: TP-Link Archer C2600
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000000] Memory policy: Data cache writealloc
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.000000] On node 0 totalpages: 122880
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat c07f1480, node_mem_map ddc39000
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.000000]   Normal zone: 960 pages used for memmap
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.000000]   Normal zone: 122880 pages, LIFO batch:31
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000000] PERCPU: Embedded 11 pages/cpu @ddc0d000 s13696 r8192 d23168 u45056
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.000000] pcpu-alloc: s13696 r8192 d23168 u45056 alloc=11*4096
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 121920
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.000000] Kernel command line:
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8 root=mtd:rootfs rootfstype=squashfs
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000000] Memory: 480536K/491520K available (4257K kernel code, 247K rwdata, 1548K rodata, 224K init, 228K bss, 10984K reserved, 0K cma-reserved, 0K highmem)
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.000000] Virtual kernel memory layout:
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.000000]     vmalloc : 0xde800000 - 0xff800000   ( 528 MB)
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xde000000   ( 480 MB)
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.000000]       .text : 0xc0208000 - 0xc07b37d8   (5806 kB)
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.000000]       .init : 0xc07b4000 - 0xc07ec000   ( 224 kB)
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.000000]       .data : 0xc07ec000 - 0xc0829c00   ( 247 kB)
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.000000]        .bss : 0xc082c000 - 0xc0865000   ( 228 kB)
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000000] Hierarchical RCU implementation.
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000000]       RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000000] NR_IRQS:16 nr_irqs:16 16
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000021] Switching to timer-based delay loop, resolution 160ns
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000200] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000222] pid_max: default: 32768 minimum: 301
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000326] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000342] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.000943] CPU: Testing write buffer coherency: ok
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.001283] Setting up static identity map for 0x42208280 - 0x422082d8
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.004327] Brought up 2 CPUs
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.004343] SMP: Total of 2 processors activated (25.00 BogoMIPS).
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.004354] CPU: All CPU(s) started in SVC mode.
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.014536] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.014772] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.014810] futex hash table entries: 512 (order: 3, 32768 bytes)
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.014972] pinctrl core: initialized pinctrl subsystem
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.016385] NET: Registered protocol family 16
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.017635] DMA: preallocated 2048 KiB pool for atomic coherent allocations
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.041453] cpuidle: using governor ladder
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.072469] cpuidle: using governor menu
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.086042] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.126677] pps_core: LinuxPPS API ver. 1 registered
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.126691] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.126728] PTP clock support registered
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.127932] clocksource: Switched to clocksource dg_timer
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.129822] NET: Registered protocol family 2
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.130369] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.130409] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.130461] TCP: Hash tables configured (established 4096 bind 4096)
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.130508] UDP hash table entries: 256 (order: 1, 8192 bytes)
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.130529] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.130704] NET: Registered protocol family 1
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.130770] PCI: CLS 0 bytes, default 64
Sun Jan 28 18:32:30 2018 kern.warn kernel: [    0.132097] No memory allocated for crashlog
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.139176] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.139197] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.141902] io scheduler noop registered
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.141926] io scheduler deadline registered (default)
Sun Jan 28 18:32:30 2018 kern.warn kernel: [    0.143137] 1b500000.pci supply vdda not found, using dummy regulator
Sun Jan 28 18:32:30 2018 kern.warn kernel: [    0.143218] 1b500000.pci supply vdda_phy not found, using dummy regulator
Sun Jan 28 18:32:30 2018 kern.warn kernel: [    0.143298] 1b500000.pci supply vdda_refclk not found, using dummy regulator
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.143821] PCI host bridge /soc/pci@1b500000 ranges:
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.143856]    IO 0x0fe00000..0x0fefffff -> 0x0fe00000
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.143879]   MEM 0x08000000..0x0fdfffff -> 0x08000000
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.175948] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.175971] pci_bus 0000:00: root bus resource [bus 00-ff]
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.175990] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.176004] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.176018] pci_bus 0000:00: scanning bus
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.176065] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.176170] pci 0000:00:00.0: calling pci_fixup_ide_bases+0x0/0x44
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.176221] pci 0000:00:00.0: supports D1
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.176233] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.176252] pci 0000:00:00.0: PME# disabled
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.176487] pci_bus 0000:00: fixups for bus
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.176511] PCI: bus0: Fast back to back transfers disabled
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.176529] pci 0000:00:00.0: scanning [bus 01-01] behind bridge, pass 0
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.176664] pci_bus 0000:01: scanning bus
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.176806] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.177119] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.177481] pci 0000:01:00.0: calling pci_fixup_ide_bases+0x0/0x44
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.177856] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.177894] pci 0000:01:00.0: PME# disabled
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.178252] pci_bus 0000:01: fixups for bus
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.178324] PCI: bus1: Fast back to back transfers disabled
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.178340] pci_bus 0000:01: bus scan returning with max=01
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.178360] pci 0000:00:00.0: scanning [bus 01-01] behind bridge, pass 1
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.178378] pci_bus 0000:00: bus scan returning with max=01
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.178445] pci 0000:00:00.0: fixup irq: got 132
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.178458] pci 0000:00:00.0: assigning IRQ 132
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.178520] pci 0000:01:00.0: fixup irq: got 132
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.178532] pci 0000:01:00.0: assigning IRQ 132
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.178591] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.178613] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.178717] pci 0000:00:00.0: PCI bridge to [bus 01]
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.178737] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x081fffff]
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.179087] aer 0000:00:00.0:pcie02: service driver aer loaded
Sun Jan 28 18:32:30 2018 kern.warn kernel: [    0.179405] 1b700000.pci supply vdda not found, using dummy regulator
Sun Jan 28 18:32:30 2018 kern.warn kernel: [    0.179483] 1b700000.pci supply vdda_phy not found, using dummy regulator
Sun Jan 28 18:32:30 2018 kern.warn kernel: [    0.179561] 1b700000.pci supply vdda_refclk not found, using dummy regulator
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.180061] PCI host bridge /soc/pci@1b700000 ranges:
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.180093]    IO 0x31e00000..0x31efffff -> 0x31e00000
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.180111]   MEM 0x2e000000..0x31dfffff -> 0x2e000000
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.209225] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.209244] pci_bus 0001:00: root bus resource [bus 00-ff]
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.209258] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.209271] pci_bus 0001:00: scanning bus
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.209310] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.209396] pci 0001:00:00.0: calling pci_fixup_ide_bases+0x0/0x44
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.209441] pci 0001:00:00.0: supports D1
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.209453] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.209469] pci 0001:00:00.0: PME# disabled
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.209682] pci_bus 0001:00: fixups for bus
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.209703] PCI: bus0: Fast back to back transfers disabled
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.209719] pci 0001:00:00.0: scanning [bus 01-01] behind bridge, pass 0
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.209852] pci_bus 0001:01: scanning bus
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.209995] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.210304] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.210664] pci 0001:01:00.0: calling pci_fixup_ide_bases+0x0/0x44
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.211038] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.211076] pci 0001:01:00.0: PME# disabled
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.211369] pci_bus 0001:01: fixups for bus
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.211428] PCI: bus1: Fast back to back transfers disabled
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.211441] pci_bus 0001:01: bus scan returning with max=01
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.211459] pci 0001:00:00.0: scanning [bus 01-01] behind bridge, pass 1
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.211476] pci_bus 0001:00: bus scan returning with max=01
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.211523] pcieport 0000:00:00.0: fixup irq: got 132
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.211535] pcieport 0000:00:00.0: assigning IRQ 132
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.211595] pci 0000:01:00.0: fixup irq: got 132
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.211607] pci 0000:01:00.0: assigning IRQ 132
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.211675] pci 0001:00:00.0: fixup irq: got 165
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.211688] pci 0001:00:00.0: assigning IRQ 165
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.211747] pci 0001:01:00.0: fixup irq: got 165
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.211760] pci 0001:01:00.0: assigning IRQ 165
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.211811] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.211832] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.211932] pci 0001:00:00.0: PCI bridge to [bus 01]
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.211950] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e1fffff]
Sun Jan 28 18:32:30 2018 kern.debug kernel: [    0.212261] aer 0001:00:00.0:pcie02: service driver aer loaded
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.214542] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.215592] gsbi 1a200000.gsbi: GSBI port protocol: 3 crci: 0
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.216651] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.219483] msm_serial 16340000.serial: msm_serial: detected port #0
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.219596] msm_serial 16340000.serial: uartclk = 1843200
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.219661] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 166, base_baud = 115200) is a MSM
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.219699] msm_serial: console setup on port #0
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.861872] console [ttyMSM0] enabled
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.866567] msm_serial: driver initialized
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.876930] loop: module loaded
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.878270] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
Sun Jan 28 18:32:30 2018 kern.info kernel: [    0.880217] m25p80 spi32766.0: mx25u25635f (32768 Kbytes)
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.886352] 25 ofpart partitions found on MTD device spi32766.0
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.891633] Creating 25 MTD partitions on "spi32766.0":
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.897282] 0x000000000000-0x000000020000 : "SBL1"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.903602] 0x000000020000-0x000000040000 : "MIBIB"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.908402] 0x000000040000-0x000000060000 : "SBL2"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.913057] 0x000000060000-0x000000090000 : "SBL3"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.917890] 0x000000090000-0x0000000a0000 : "DDRCONFIG"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.922788] 0x0000000a0000-0x0000000b0000 : "SSD"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.927825] 0x0000000b0000-0x0000000e0000 : "TZ"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.932739] 0x0000000e0000-0x000000100000 : "RPM"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.937382] 0x000000100000-0x000000170000 : "fs-uboot"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.941936] 0x000000170000-0x0000001b0000 : "uboot-env"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.947009] 0x0000001b0000-0x0000001f0000 : "radio"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.952095] 0x0000001f0000-0x0000003f0000 : "os-image"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.957010] 0x0000003f0000-0x000001ef0000 : "rootfs"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.962161] mtd: device 12 (rootfs) set to be root filesystem
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.966584] 1 squashfs-split partitions found on MTD device rootfs
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.972106] 0x000000910000-0x000001ef0000 : "rootfs_data"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.979000] 0x000001ef0000-0x000001ef0200 : "default-mac"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.984390] 0x000001ef0200-0x000001ef0400 : "pin"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.989969] 0x000001ef0400-0x000001f00000 : "product-info"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.994560] 0x000001f00000-0x000001f10000 : "partition-table"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    0.999945] 0x000001f10000-0x000001f20000 : "soft-version"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    1.005684] 0x000001f20000-0x000001f30000 : "support-list"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    1.011150] 0x000001f30000-0x000001f40000 : "profile"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    1.016794] 0x000001f40000-0x000001f50000 : "default-config"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    1.021740] 0x000001f50000-0x000001f90000 : "user-config"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    1.027393] 0x000001f90000-0x000001fd0000 : "qos-db"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    1.032800] 0x000001fd0000-0x000001fe0000 : "usb-config"
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    1.037676] 0x000001fe0000-0x000002000000 : "log"
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.043940] libphy: Fixed MDIO Bus: probed
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.047122] libphy: GPIO Bitbanged MDIO: probed
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.072974] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.894250] stmmac - user ID: 0x10, Synopsys ID: 0x37
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.894274]  Ring mode enabled
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.898340]  DMA HW capability register supported
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.901225]  Enhanced/Alternate descriptors
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.905996]       Enabled extended descriptors
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.910052]  RX Checksum Offload Engine supported (type 2)
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.914160]  TX Checksum insertion supported
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.919608]  Wake-Up On Lan supported
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.923967]  Enable RX Mitigation via HW Watchdog Timer
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.928998] stmmac - user ID: 0x10, Synopsys ID: 0x37
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.932562]  Ring mode enabled
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.937766]  DMA HW capability register supported
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.940801]  Enhanced/Alternate descriptors
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.945493]       Enabled extended descriptors
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.949581]  RX Checksum Offload Engine supported (type 2)
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.953654]  TX Checksum insertion supported
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.959095]  Wake-Up On Lan supported
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.963462]  Enable RX Mitigation via HW Watchdog Timer
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.967642] i2c /dev entries driver
Sun Jan 28 18:32:30 2018 kern.err kernel: [    1.972753] gcc-ipq806x 900000.clock-controller: tsens calibration failed
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.976302] Speed bin: 0
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.982558] PVS bin: 1
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    1.985493] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    1.987289] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
Sun Jan 28 18:32:30 2018 kern.info kernel: [    1.994660] sdhci: Secure Digital Host Controller Interface driver
Sun Jan 28 18:32:30 2018 kern.info kernel: [    2.001833] sdhci: Copyright(c) Pierre Ossman
Sun Jan 28 18:32:30 2018 kern.info kernel: [    2.008005] sdhci-pltfm: SDHCI platform and OF driver helper
Sun Jan 28 18:32:30 2018 kern.info kernel: [    2.014406] L2 @ QSB rate. Forcing new rate.
Sun Jan 28 18:32:30 2018 kern.info kernel: [    2.018349] L2 @ 384000 KHz
Sun Jan 28 18:32:30 2018 kern.info kernel: [    2.022524] CPU0 @ 800000 KHz
Sun Jan 28 18:32:30 2018 kern.info kernel: [    2.024921] CPU1 @ QSB rate. Forcing new rate.
Sun Jan 28 18:32:30 2018 kern.info kernel: [    2.028120] CPU1 @ 384000 KHz
Sun Jan 28 18:32:30 2018 kern.info kernel: [    2.034299] NET: Registered protocol family 10
Sun Jan 28 18:32:30 2018 kern.info kernel: [    2.036633] NET: Registered protocol family 17
Sun Jan 28 18:32:30 2018 kern.info kernel: [    2.039960] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Sun Jan 28 18:32:30 2018 kern.info kernel: [    2.044503] 8021q: 802.1Q VLAN Support v1.8
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    2.057103] Registering SWP/SWPB emulation handler
Sun Jan 28 18:32:30 2018 kern.err kernel: [    2.065308] cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
Sun Jan 28 18:32:30 2018 kern.err kernel: [    2.066425] cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:1, -19
Sun Jan 28 18:32:30 2018 kern.info kernel: [    2.074671] hctosys: unable to open rtc device (rtc0)
Sun Jan 28 18:32:30 2018 kern.info kernel: [    2.107602] VFS: Mounted root (squashfs filesystem) readonly on device 31:12.
Sun Jan 28 18:32:30 2018 kern.info kernel: [    2.108093] Freeing unused kernel memory: 224K
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    2.338383] random: nonblocking pool is initialized
Sun Jan 28 18:32:30 2018 user.info kernel: [    3.615647] init: Console is alive
Sun Jan 28 18:32:30 2018 user.info kernel: [    3.615772] init: - watchdog -
Sun Jan 28 18:32:30 2018 user.info kernel: [    5.554445] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.609792] usbcore: registered new interface driver usbfs
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.609880] usbcore: registered new interface driver hub
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.614238] usbcore: registered new device driver usb
Sun Jan 28 18:32:30 2018 kern.notice kernel: [    5.633195] SCSI subsystem initialized
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.635372] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.636422] ehci-platform: EHCI generic platform driver
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.644454] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.647882] ohci-platform: OHCI generic platform driver
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.759749] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.759826] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.764378] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x00010010
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.771871] xhci-hcd xhci-hcd.0.auto: irq 168, io mem 0x11000000
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.781627] hub 1-0:1.0: USB hub found
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.786688] hub 1-0:1.0: 1 port detected
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.790772] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.794274] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.799904] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.808107] hub 2-0:1.0: USB hub found
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.815605] hub 2-0:1.0: 1 port detected
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.819741] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.823117] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.828699] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x00010010
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.835993] xhci-hcd xhci-hcd.1.auto: irq 169, io mem 0x10000000
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.845355] hub 3-0:1.0: USB hub found
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.850939] hub 3-0:1.0: 1 port detected
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.854609] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.858575] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.863861] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.871832] hub 4-0:1.0: USB hub found
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.879744] hub 4-0:1.0: 1 port detected
Sun Jan 28 18:32:30 2018 kern.info kernel: [    5.885866] usbcore: registered new interface driver usb-storage
Sun Jan 28 18:32:30 2018 user.info kernel: [    5.887380] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Sun Jan 28 18:32:30 2018 user.info kernel: [    5.901628] init: - preinit -
Sun Jan 28 18:32:30 2018 kern.info kernel: [    9.989155] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
Sun Jan 28 18:32:30 2018 user.info kernel: [   11.214219] mount_root: loading kmods from internal overlay
Sun Jan 28 18:32:30 2018 user.info kernel: [   11.235115] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Sun Jan 28 18:32:30 2018 user.info kernel: [   11.236885] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Sun Jan 28 18:32:30 2018 kern.notice kernel: [   13.650590] jffs2: notice: (157) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Sun Jan 28 18:32:30 2018 user.info kernel: [   13.651386] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Sun Jan 28 18:32:30 2018 user.info kernel: [   13.687246] block: extroot: not configured
Sun Jan 28 18:32:30 2018 kern.notice kernel: [   14.048209] jffs2: notice: (154) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Sun Jan 28 18:32:30 2018 user.info kernel: [   14.050943] mount_root: loading kmods from internal overlay
Sun Jan 28 18:32:30 2018 user.info kernel: [   14.078023] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
Sun Jan 28 18:32:30 2018 user.info kernel: [   14.085580] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
Sun Jan 28 18:32:30 2018 user.info kernel: [   25.295668] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Sun Jan 28 18:32:30 2018 user.info kernel: [   25.317156] block: extroot: not configured
Sun Jan 28 18:32:30 2018 user.info kernel: [   25.360189] mount_root: switching to jffs2 overlay
Sun Jan 28 18:32:30 2018 user.warn kernel: [   25.395789] urandom-seed: Seeding with /etc/urandom.seed
Sun Jan 28 18:32:30 2018 user.info kernel: [   25.493200] procd: - early -
Sun Jan 28 18:32:30 2018 user.info kernel: [   25.493301] procd: - watchdog -
Sun Jan 28 18:32:30 2018 user.info kernel: [   26.158373] procd: - watchdog -
Sun Jan 28 18:32:30 2018 user.info kernel: [   26.158615] procd: - ubus -
Sun Jan 28 18:32:30 2018 user.info kernel: [   26.217093] procd: - init -
Sun Jan 28 18:32:30 2018 user.info kernel: [   26.475308] kmodloader: loading kernel modules from /etc/modules.d/*
Sun Jan 28 18:32:30 2018 kern.info kernel: [   26.480837] tun: Universal TUN/TAP device driver, 1.6
Sun Jan 28 18:32:30 2018 kern.info kernel: [   26.480858] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Sun Jan 28 18:32:30 2018 kern.info kernel: [   26.487109] ip6_tables: (C) 2000-2006 Netfilter Core Team
Sun Jan 28 18:32:30 2018 kern.info kernel: [   26.495372] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
Sun Jan 28 18:32:30 2018 kern.info kernel: [   26.497216] Backport generated by backports.git backports-20160324-13-g24da7d3c
Sun Jan 28 18:32:30 2018 kern.info kernel: [   26.519734] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
Sun Jan 28 18:32:30 2018 kern.debug kernel: [   26.519813] ath10k_pci 0000:01:00.0: enabling bus mastering
Sun Jan 28 18:32:30 2018 kern.info kernel: [   26.520245] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Sun Jan 28 18:32:30 2018 kern.warn kernel: [   26.655111] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
Sun Jan 28 18:32:30 2018 kern.warn kernel: [   26.655160] ath10k_pci 0000:01:00.0: Falling back to user helper
Sun Jan 28 18:32:30 2018 kern.err kernel: [   36.843498] firmware ath10k!pre-cal-pci-0000:01:00.0.bin: firmware_loading_store: map pages failed
Sun Jan 28 18:32:30 2018 kern.info kernel: [   37.589752] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
Sun Jan 28 18:32:30 2018 kern.info kernel: [   37.589791] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
Sun Jan 28 18:32:30 2018 kern.info kernel: [   37.599928] ath10k_pci 0000:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01
Sun Jan 28 18:32:30 2018 kern.err kernel: [   37.630413] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002▒▒HD▒t▒q▒▒=F▒▒;*▒▒=F▒
▒' from ath10k/QCA99X0/hw2.0/board-2.bin
Sun Jan 28 18:32:30 2018 kern.info kernel: [   37.632168] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 7e56fd07
Sun Jan 28 18:32:30 2018 kern.info kernel: [   38.814343] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1
Sun Jan 28 18:32:30 2018 kern.debug kernel: [   38.888920] ath: EEPROM regdomain: 0x0
Sun Jan 28 18:32:30 2018 kern.debug kernel: [   38.888945] ath: EEPROM indicates default country code should be used
Sun Jan 28 18:32:30 2018 kern.debug kernel: [   38.888963] ath: doing EEPROM country->regdmn map search
Sun Jan 28 18:32:30 2018 kern.debug kernel: [   38.888986] ath: country maps to regdmn code: 0x3a
Sun Jan 28 18:32:30 2018 kern.debug kernel: [   38.889006] ath: Country alpha2 being used: US
Sun Jan 28 18:32:30 2018 kern.debug kernel: [   38.889021] ath: Regpair used: 0x3a
Sun Jan 28 18:32:30 2018 kern.info kernel: [   38.896311] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
Sun Jan 28 18:32:30 2018 kern.debug kernel: [   38.896433] ath10k_pci 0001:01:00.0: enabling bus mastering
Sun Jan 28 18:32:30 2018 kern.info kernel: [   38.897061] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Sun Jan 28 18:32:30 2018 kern.warn kernel: [   39.029707] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2
Sun Jan 28 18:32:30 2018 kern.warn kernel: [   39.029740] ath10k_pci 0001:01:00.0: Falling back to user helper
Sun Jan 28 18:32:30 2018 kern.err kernel: [   39.297826] firmware ath10k!pre-cal-pci-0001:01:00.0.bin: firmware_loading_store: map pages failed
Sun Jan 28 18:32:30 2018 kern.info kernel: [   41.231734] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
Sun Jan 28 18:32:30 2018 kern.info kernel: [   41.231774] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
Sun Jan 28 18:32:30 2018 kern.info kernel: [   41.242444] ath10k_pci 0001:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01
Sun Jan 28 18:32:30 2018 kern.err kernel: [   41.248474] ath10k_pci 0001:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin
Sun Jan 28 18:32:30 2018 kern.info kernel: [   41.257378] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 7e56fd07
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.440253] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1
Sun Jan 28 18:32:30 2018 kern.debug kernel: [   42.503871] ath: EEPROM regdomain: 0x0
Sun Jan 28 18:32:30 2018 kern.debug kernel: [   42.503885] ath: EEPROM indicates default country code should be used
Sun Jan 28 18:32:30 2018 kern.debug kernel: [   42.503896] ath: doing EEPROM country->regdmn map search
Sun Jan 28 18:32:30 2018 kern.debug kernel: [   42.503909] ath: country maps to regdmn code: 0x3a
Sun Jan 28 18:32:30 2018 kern.debug kernel: [   42.503921] ath: Country alpha2 being used: US
Sun Jan 28 18:32:30 2018 kern.debug kernel: [   42.503930] ath: Regpair used: 0x3a
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.576756] fuse init (API version 7.23)
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.580020] usbcore: registered new interface driver cdc_acm
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.580048] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.586160] usbcore: registered new interface driver cdc_wdm
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.594406] ip_tables: (C) 2000-2006 Netfilter Core Team
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.602672] nf_conntrack version 0.5.0 (7511 buckets, 30044 max)
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.789481] usbcore: registered new interface driver usblp
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.796338] usbcore: registered new interface driver usbserial
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.796464] usbcore: registered new interface driver usbserial_generic
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.801294] usbserial: USB Serial support registered for generic
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.817724] xt_time: kernel timezone is -0000
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.819355] usbcore: registered new interface driver cdc_ether
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.823292] usbcore: registered new interface driver cdc_ncm
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.827812] usbcore: registered new interface driver huawei_cdc_ncm
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.841930] PPP generic driver version 2.4.2
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.842586] NET: Registered protocol family 24
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.846095] usbcore: registered new interface driver qmi_wwan
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.850540] usbcore: registered new interface driver rndis_host
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.856221] usbcore: registered new interface driver sierra
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.861220] usbserial: USB Serial support registered for Sierra USB modem
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.867672] usbcore: registered new interface driver sierra_net
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.876092] usbcore: registered new interface driver cdc_mbim
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.880724] usbcore: registered new interface driver option
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.885248] usbserial: USB Serial support registered for GSM modem (1-port)
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.892764] usbcore: registered new interface driver qcserial
Sun Jan 28 18:32:30 2018 kern.info kernel: [   42.897579] usbserial: USB Serial support registered for Qualcomm USB modem
Sun Jan 28 18:32:30 2018 user.info kernel: [   42.903683] kmodloader: done loading kernel modules from /etc/modules.d/*
Sun Jan 28 18:32:31 2018 user.notice : Added device handler type: tunnel
Sun Jan 28 18:32:31 2018 user.notice : Added device handler type: Network device
Sun Jan 28 18:32:31 2018 user.notice : Added device handler type: bridge
Sun Jan 28 18:32:31 2018 user.notice : Added device handler type: macvlan
Sun Jan 28 18:32:31 2018 user.notice : Added device handler type: 8021ad
Sun Jan 28 18:32:31 2018 user.notice : Added device handler type: 8021q
Sun Jan 28 18:32:31 2018 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled
Sun Jan 28 18:32:31 2018 daemon.notice procd: /etc/init.d/network: 'radio1' is disabled
Sun Jan 28 18:32:31 2018 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled
Sun Jan 28 18:32:31 2018 daemon.notice procd: /etc/init.d/network: 'radio1' is disabled
Sun Jan 28 18:32:32 2018 daemon.notice netifd: Interface 'lan' is enabled
Sun Jan 28 18:32:32 2018 daemon.notice netifd: Interface 'lan' is setting up now
Sun Jan 28 18:32:32 2018 kern.info kernel: [   46.043711] device eth1 entered promiscuous mode
Sun Jan 28 18:32:32 2018 kern.info kernel: [   46.045796] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Sun Jan 28 18:32:32 2018 daemon.notice netifd: Interface 'lan' is now up
Sun Jan 28 18:32:32 2018 daemon.notice netifd: Interface 'loopback' is enabled
Sun Jan 28 18:32:32 2018 daemon.notice netifd: Interface 'loopback' is setting up now
Sun Jan 28 18:32:32 2018 daemon.notice netifd: Interface 'loopback' is now up
Sun Jan 28 18:32:32 2018 daemon.notice netifd: Interface 'wan' is enabled
Sun Jan 28 18:32:32 2018 daemon.notice netifd: Interface 'wan6' is enabled
Sun Jan 28 18:32:32 2018 daemon.notice netifd: Network device 'lo' link is up
Sun Jan 28 18:32:32 2018 daemon.notice netifd: Interface 'loopback' has link connectivity
Sun Jan 28 18:32:32 2018 daemon.notice netifd: Network device 'eth0' link is up
Sun Jan 28 18:32:32 2018 daemon.notice netifd: Interface 'wan' has link connectivity
Sun Jan 28 18:32:32 2018 daemon.info odhcpd[755]: Raising SIGUSR1 due to address change on br-lan
Sun Jan 28 18:32:32 2018 daemon.notice netifd: Interface 'wan' is setting up now
Sun Jan 28 18:32:32 2018 daemon.notice netifd: Interface 'wan6' has link connectivity
Sun Jan 28 18:32:32 2018 daemon.notice netifd: Interface 'wan6' is setting up now
Sun Jan 28 18:32:32 2018 daemon.notice netifd: wan (825): udhcpc: started, v1.25.1
Sun Jan 28 18:32:32 2018 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Sun Jan 28 18:32:32 2018 daemon.notice netifd: wan (825): udhcpc: sending discover
Sun Jan 28 18:32:33 2018 daemon.err odhcp6c[824]: Failed to send DHCPV6 message to ff02::1:2 (Address not available)
Sun Jan 28 18:32:33 2018 daemon.info odhcpd[755]: Using a RA lifetime of 0 seconds on br-lan
Sun Jan 28 18:32:33 2018 daemon.notice odhcpd[755]: Failed to send to ff02::1%br-lan (Address not available)
Sun Jan 28 18:32:33 2018 daemon.err block: /dev/mtdblock12 is already mounted on /rom
Sun Jan 28 18:32:33 2018 daemon.err block: /dev/mtdblock13 is already mounted on /overlay
Sun Jan 28 18:32:34 2018 authpriv.info dropbear[890]: Not backgrounding
Sun Jan 28 18:32:34 2018 kern.info kernel: [   48.021136] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
Sun Jan 28 18:32:34 2018 kern.info kernel: [   48.021206] br-lan: port 1(eth1) entered forwarding state
Sun Jan 28 18:32:34 2018 kern.info kernel: [   48.029120] br-lan: port 1(eth1) entered forwarding state
Sun Jan 28 18:32:34 2018 daemon.notice netifd: Network device 'eth1' link is up
Sun Jan 28 18:32:34 2018 kern.info kernel: [   48.034653] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Sun Jan 28 18:32:34 2018 daemon.notice netifd: bridge 'br-lan' link is up
Sun Jan 28 18:32:34 2018 daemon.notice netifd: Interface 'lan' has link connectivity
Sun Jan 28 18:32:34 2018 kern.info kernel: [   48.048292] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
Sun Jan 28 18:32:35 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led USB 1
Sun Jan 28 18:32:35 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led USB 2
Sun Jan 28 18:32:35 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led wan
Sun Jan 28 18:32:35 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led lan
Sun Jan 28 18:32:35 2018 daemon.info procd: - init complete -
Sun Jan 28 18:32:35 2018 daemon.notice netifd: wan (825): udhcpc: sending discover
Sun Jan 28 18:32:36 2018 kern.info kernel: [   50.028284] br-lan: port 1(eth1) entered forwarding state
Sun Jan 28 18:32:37 2018 daemon.info dnsmasq[1182]: started, version 2.78 cachesize 150
Sun Jan 28 18:32:37 2018 daemon.info dnsmasq[1182]: DNS service limited to local subnets
Sun Jan 28 18:32:37 2018 daemon.info dnsmasq[1182]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Sun Jan 28 18:32:37 2018 daemon.info dnsmasq[1182]: using local addresses only for domain lan
Sun Jan 28 18:32:37 2018 daemon.info dnsmasq[1182]: reading /tmp/resolv.conf.auto
Sun Jan 28 18:32:37 2018 daemon.info dnsmasq[1182]: using local addresses only for domain lan
Sun Jan 28 18:32:37 2018 daemon.info dnsmasq[1182]: using nameserver 192.168.1.1#53
Sun Jan 28 18:32:37 2018 daemon.info dnsmasq[1182]: read /etc/hosts - 4 addresses
Sun Jan 28 18:32:37 2018 daemon.info dnsmasq[1182]: read /tmp/hosts/odhcpd - 0 addresses
Sun Jan 28 18:32:37 2018 daemon.info dnsmasq[1182]: read /tmp/hosts/dhcp.cfg02411c - 1 addresses
Sun Jan 28 18:35:44 2018 daemon.notice netifd: wan (825): udhcpc: sending discover
Sun Jan 28 18:36:02 2018 authpriv.info dropbear[1189]: Child connection from 192.168.1.8:52308
Sun Jan 28 18:36:08 2018 authpriv.notice dropbear[1189]: Password auth succeeded for 'root' from 192.168.1.8:52308
Sun Jan 28 18:36:14 2018 daemon.info dnsmasq[1182]: read /etc/hosts - 4 addresses
Sun Jan 28 18:36:14 2018 daemon.info dnsmasq[1182]: read /tmp/hosts/odhcpd - 0 addresses
Sun Jan 28 18:36:14 2018 daemon.info dnsmasq[1182]: read /tmp/hosts/dhcp.cfg02411c - 1 addresses

Teraz się pojawił. Co zrobiłem  źle?