Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Oprogramowanie / Software → Tryb Failsafe i zmiana hasła
Strony 1
Zaloguj się lub zarejestruj by napisać odpowiedź
Witam,
Jak w temacie. Router WDR4300. Przy wprowadzaniu nowego hasła pojawiają się komunikaty:
passwd: /ect/passwd: Read-only file system
passwd: can't update passwd file /ect/passwd
Czemu nowe hasło? Zmiana oprogramowania Gargoyle z 1.9 na 1.10.0.1.
Próbowałem
mount_root następnie passwd.
Masz system tylko do zapisu więc albo zachowałeś konfigurację i masz zawalony flash albo nie zrobił się jffs, Zrób firstboota i uruchom go ponownie.
Wpisałem firstboot -y
Odpowiedź:
/dev/mtdblock3 id bot mounted
/dev/mtdblock3 will be erased on jest mount
Wpisałem reboot -f
Uruchomiłem ponownie w Failsafe
mount_root
Nie mogę zmienić hasła.
Wpisałem firstboot komunikat jak wyżej
Wpisałem reboot
Uruchomiłem ponownie w Failsafe.
Dalej to samo. Nie mogę zmienić hasła.
Komunikat Read-only file system
Piszę z tel i poprawia automatycznie pisownię.
Uruchom normalnie (nie w failsafe), zaloguj się przez ssh i pokaż wyniki poleceń
logread
mount
Witam,
#logread
Sat Oct 28 07:54:25 2017 kern.info kernel: [ 14.140000] usbserial: USB Serial support registered for Sierra USB modem
Sat Oct 28 07:54:25 2017 kern.info kernel: [ 14.160000] usbcore: registered new interface driver sierra_net
Sat Oct 28 07:54:25 2017 kern.info kernel: [ 14.240000] usbcore: registered new interface driver cdc_mbim
Sat Oct 28 07:54:25 2017 kern.info kernel: [ 14.260000] usbcore: registered new interface driver option
Sat Oct 28 07:54:25 2017 kern.info kernel: [ 14.270000] usbserial: USB Serial support registered for GSM modem (1-port)
Sat Oct 28 07:54:25 2017 kern.info kernel: [ 14.290000] usbcore: registered new interface driver qcserial
Sat Oct 28 07:54:25 2017 kern.info kernel: [ 14.290000] usbserial: USB Serial support registered for Qualcomm USB modem
Sat Oct 28 07:54:25 2017 kern.debug kernel: [ 14.330000] ath: EEPROM regdomain: 0x0
Sat Oct 28 07:54:25 2017 kern.debug kernel: [ 14.330000] ath: EEPROM indicates default country code should be used
Sat Oct 28 07:54:25 2017 kern.debug kernel: [ 14.330000] ath: doing EEPROM country->regdmn map search
Sat Oct 28 07:54:25 2017 kern.debug kernel: [ 14.330000] ath: country maps to regdmn code: 0x3a
Sat Oct 28 07:54:25 2017 kern.debug kernel: [ 14.330000] ath: Country alpha2 being used: US
Sat Oct 28 07:54:25 2017 kern.debug kernel: [ 14.330000] ath: Regpair used: 0x3a
Sat Oct 28 07:54:25 2017 kern.debug kernel: [ 14.340000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Sat Oct 28 07:54:25 2017 kern.info kernel: [ 14.340000] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47
Sat Oct 28 07:54:25 2017 kern.warn kernel: [ 14.350000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Sat Oct 28 07:54:25 2017 kern.debug kernel: [ 14.360000] ath: EEPROM regdomain: 0x0
Sat Oct 28 07:54:25 2017 kern.debug kernel: [ 14.360000] ath: EEPROM indicates default country code should be used
Sat Oct 28 07:54:25 2017 kern.debug kernel: [ 14.360000] ath: doing EEPROM country->regdmn map search
Sat Oct 28 07:54:25 2017 kern.debug kernel: [ 14.360000] ath: country maps to regdmn code: 0x3a
Sat Oct 28 07:54:25 2017 kern.debug kernel: [ 14.360000] ath: Country alpha2 being used: US
Sat Oct 28 07:54:25 2017 kern.debug kernel: [ 14.360000] ath: Regpair used: 0x3a
Sat Oct 28 07:54:25 2017 kern.debug kernel: [ 14.370000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Sat Oct 28 07:54:25 2017 kern.info kernel: [ 14.370000] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
Sat Oct 28 07:54:28 2017 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Sat Oct 28 07:54:34 2017 kern.info kernel: [ 38.990000] device eth0.1 entered promiscuous mode
Sat Oct 28 07:54:34 2017 kern.info kernel: [ 39.000000] device eth0 entered promiscuous mode
Sat Oct 28 07:54:34 2017 daemon.notice netifd: Interface 'lan' is enabled
Sat Oct 28 07:54:34 2017 daemon.notice netifd: Interface 'lan' is setting up now
Sat Oct 28 07:54:34 2017 daemon.notice netifd: Interface 'lan' is now up
Sat Oct 28 07:54:34 2017 daemon.notice netifd: Interface 'loopback' is enabled
Sat Oct 28 07:54:34 2017 daemon.notice netifd: Interface 'loopback' is setting up now
Sat Oct 28 07:54:34 2017 daemon.notice netifd: Interface 'loopback' is now up
Sat Oct 28 07:54:34 2017 daemon.notice netifd: Interface 'wan' is enabled
Sat Oct 28 07:54:34 2017 daemon.notice netifd: Interface 'wan6' is enabled
Sat Oct 28 07:54:34 2017 daemon.notice netifd: Network device 'lo' link is up
Sat Oct 28 07:54:34 2017 daemon.notice netifd: Interface 'loopback' has link connectivity
Sat Oct 28 07:54:35 2017 user.err syslog: error starting threads: errno 89 (Function not implemented)
Sat Oct 28 07:54:35 2017 kern.info kernel: [ 40.000000] eth0: link up (1000Mbps/Full duplex)
Sat Oct 28 07:54:35 2017 kern.info kernel: [ 40.000000] br-lan: port 1(eth0.1) entered forwarding state
Sat Oct 28 07:54:35 2017 kern.info kernel: [ 40.010000] br-lan: port 1(eth0.1) entered forwarding state
Sat Oct 28 07:54:35 2017 daemon.notice netifd: VLAN 'eth0.2' link is up
Sat Oct 28 07:54:35 2017 daemon.notice netifd: Interface 'wan' has link connectivity
Sat Oct 28 07:54:35 2017 daemon.notice netifd: Interface 'wan' is setting up now
Sat Oct 28 07:54:35 2017 daemon.notice netifd: Interface 'wan6' has link connectivity
Sat Oct 28 07:54:35 2017 daemon.notice netifd: Interface 'wan6' is setting up now
Sat Oct 28 07:54:35 2017 daemon.notice netifd: Interface 'wan6' is now up
Sat Oct 28 07:54:35 2017 daemon.notice netifd: Network device 'eth0' link is up
Sat Oct 28 07:54:35 2017 daemon.notice netifd: VLAN 'eth0.1' link is up
Sat Oct 28 07:54:35 2017 daemon.notice netifd: Bridge 'br-lan' link is up
Sat Oct 28 07:54:35 2017 daemon.notice netifd: Interface 'lan' has link connectivity
Sat Oct 28 07:54:36 2017 user.emerg syslog: exportfs: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Sat Oct 28 07:54:36 2017 user.emerg syslog: exportfs: can't lock /var/lib/nfs/etab for writing
Sat Oct 28 07:54:36 2017 user.emerg syslog: exportfs: could not open /var/lib/nfs/.xtab.lock for locking: errno 2 (No such file or directory)
Sat Oct 28 07:54:36 2017 user.emerg syslog: exportfs: can't lock /var/lib/nfs/xtab for writing
Sat Oct 28 07:54:36 2017 user.emerg syslog: Command failed: Not found
Sat Oct 28 07:54:36 2017 daemon.notice netifd: wan (3559): udhcpc (v1.23.2) started
Sat Oct 28 07:54:36 2017 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Sat Oct 28 07:54:37 2017 daemon.notice netifd: wan (3559): Sending discover...
Sat Oct 28 07:54:37 2017 kern.info kernel: [ 42.010000] br-lan: port 1(eth0.1) entered forwarding state
Sat Oct 28 07:54:38 2017 daemon.notice netifd: radio0 (3410): Configuration file: /var/run/hostapd-phy0.conf
Sat Oct 28 07:54:38 2017 daemon.notice netifd: radio0 (3410): wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Sat Oct 28 07:54:38 2017 kern.info kernel: [ 42.720000] device wlan0 entered promiscuous mode
Sat Oct 28 07:54:38 2017 daemon.notice netifd: radio1 (3411): Configuration file: /var/run/hostapd-phy1.conf
Sat Oct 28 07:54:38 2017 daemon.notice netifd: radio0 (3410): Using interface wlan0 with hwaddr 14:cc:20:8a:23:5a and ssid "Gargoyle"
Sat Oct 28 07:54:38 2017 kern.info kernel: [ 42.860000] device wlan1 entered promiscuous mode
Sat Oct 28 07:54:38 2017 kern.info kernel: [ 42.860000] br-lan: port 3(wlan1) entered forwarding state
Sat Oct 28 07:54:38 2017 kern.info kernel: [ 42.870000] br-lan: port 3(wlan1) entered forwarding state
Sat Oct 28 07:54:38 2017 daemon.notice netifd: radio1 (3411): wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Sat Oct 28 07:54:38 2017 daemon.notice netifd: radio1 (3411): Using interface wlan1 with hwaddr 14:cc:20:8a:23:5b and ssid "Gargoyle"
Sat Oct 28 07:54:39 2017 kern.info kernel: [ 43.710000] br-lan: port 3(wlan1) entered disabled state
Sat Oct 28 07:54:40 2017 daemon.notice netifd: wan (3559): Sending discover...
Sat Oct 28 07:54:40 2017 user.emerg syslog: ERROR: No valid dynamic DNS service configurations defined
Sat Oct 28 07:54:40 2017 user.emerg syslog: (Did you specify correct configuration file path?)
Sat Oct 28 07:54:41 2017 daemon.notice netifd: radio0 (3410): wlan0: interface state COUNTRY_UPDATE->ENABLED
Sat Oct 28 07:54:41 2017 daemon.notice netifd: radio0 (3410): wlan0: AP-ENABLED
Sat Oct 28 07:54:41 2017 kern.info kernel: [ 45.310000] br-lan: port 2(wlan0) entered forwarding state
Sat Oct 28 07:54:41 2017 kern.info kernel: [ 45.320000] br-lan: port 2(wlan0) entered forwarding state
Sat Oct 28 07:54:41 2017 kern.info kernel: [ 45.350000] br-lan: port 3(wlan1) entered forwarding state
Sat Oct 28 07:54:41 2017 kern.info kernel: [ 45.350000] br-lan: port 3(wlan1) entered forwarding state
Sat Oct 28 07:54:41 2017 daemon.notice netifd: radio1 (3411): wlan1: interface state COUNTRY_UPDATE->ENABLED
Sat Oct 28 07:54:41 2017 daemon.notice netifd: radio1 (3411): wlan1: AP-ENABLED
Sat Oct 28 07:54:41 2017 daemon.notice netifd: Network device 'wlan0' link is up
Sat Oct 28 07:54:41 2017 daemon.notice netifd: Network device 'wlan1' link is up
Sat Oct 28 07:54:43 2017 daemon.notice netifd: wan (3559): Sending discover...
Sat Oct 28 07:54:43 2017 kern.info kernel: [ 47.320000] br-lan: port 2(wlan0) entered forwarding state
Sat Oct 28 07:54:43 2017 kern.info kernel: [ 47.350000] br-lan: port 3(wlan1) entered forwarding state
Sat Oct 28 07:54:44 2017 authpriv.info dropbear[3988]: Not backgrounding
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: started, version 2.78 cachesize 150
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: DNS service limited to local subnets
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: compile time options: no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq-dhcp[4007]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 95.142.171.235#53 for domain micro
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 95.211.32.162#53 for domain micro
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 66.244.95.20#53 for domain micro
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 95.142.171.235#53 for domain oss
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 95.211.32.162#53 for domain oss
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 66.244.95.20#53 for domain oss
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 95.142.171.235#53 for domain null
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 95.211.32.162#53 for domain null
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 66.244.95.20#53 for domain null
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 95.142.171.235#53 for domain ing
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 95.211.32.162#53 for domain ing
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 66.244.95.20#53 for domain ing
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 95.142.171.235#53 for domain indy
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 95.211.32.162#53 for domain indy
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 66.244.95.20#53 for domain indy
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 95.142.171.235#53 for domain gopher
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 95.211.32.162#53 for domain gopher
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 66.244.95.20#53 for domain gopher
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 95.142.171.235#53 for domain geek
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 95.211.32.162#53 for domain geek
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 66.244.95.20#53 for domain geek
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 95.142.171.235#53 for domain fur
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 95.211.32.162#53 for domain fur
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 66.244.95.20#53 for domain fur
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 95.142.171.235#53 for domain free
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 95.211.32.162#53 for domain free
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 66.244.95.20#53 for domain free
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 95.142.171.235#53 for domain bbs
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 95.211.32.162#53 for domain bbs
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using nameserver 66.244.95.20#53 for domain bbs
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: using 11 more nameservers
Sat Oct 28 07:54:47 2017 daemon.warn dnsmasq[4007]: no servers found in /tmp/resolv.conf.auto, will retry
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: read /etc/hosts - 1 addresses
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: read /tmp/hosts/dhcp - 1 addresses
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq-dhcp[4007]: read /etc/ethers - 0 addresses
Sat Oct 28 07:54:47 2017 daemon.info dnsmasq[4007]: exiting on receipt of SIGTERM
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: started, version 2.78 cachesize 150
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: DNS service limited to local subnets
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: compile time options: no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq-dhcp[4074]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 95.142.171.235#53 for domain micro
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 95.211.32.162#53 for domain micro
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 66.244.95.20#53 for domain micro
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 95.142.171.235#53 for domain oss
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 95.211.32.162#53 for domain oss
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 66.244.95.20#53 for domain oss
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 95.142.171.235#53 for domain null
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 95.211.32.162#53 for domain null
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 66.244.95.20#53 for domain null
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 95.142.171.235#53 for domain ing
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 95.211.32.162#53 for domain ing
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 66.244.95.20#53 for domain ing
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 95.142.171.235#53 for domain indy
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 95.211.32.162#53 for domain indy
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 66.244.95.20#53 for domain indy
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 95.142.171.235#53 for domain gopher
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 95.211.32.162#53 for domain gopher
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 66.244.95.20#53 for domain gopher
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 95.142.171.235#53 for domain geek
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 95.211.32.162#53 for domain geek
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 66.244.95.20#53 for domain geek
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 95.142.171.235#53 for domain fur
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 95.211.32.162#53 for domain fur
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 66.244.95.20#53 for domain fur
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 95.142.171.235#53 for domain free
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 95.211.32.162#53 for domain free
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 66.244.95.20#53 for domain free
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 95.142.171.235#53 for domain bbs
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 95.211.32.162#53 for domain bbs
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using nameserver 66.244.95.20#53 for domain bbs
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: using 11 more nameservers
Sat Oct 28 07:54:50 2017 daemon.warn dnsmasq[4074]: no servers found in /tmp/resolv.conf.auto, will retry
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: read /etc/hosts - 2 addresses
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq[4074]: read /tmp/hosts/dhcp - 1 addresses
Sat Oct 28 07:54:50 2017 daemon.info dnsmasq-dhcp[4074]: read /etc/ethers - 0 addresses
Sat Oct 28 07:54:52 2017 kern.notice kernel: [ 56.340000] random: nonblocking pool is initialized
Sat Oct 28 07:55:06 2017 user.notice root: vsftpd init: mounted = 0
Sat Oct 28 07:55:06 2017 user.emerg syslog: ERROR: No drives attached, no directories to share!
Sat Oct 28 07:55:06 2017 daemon.err mount_root: no jffs2 marker found
Sat Oct 28 07:55:06 2017 kern.warn kernel: [ 70.380000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
Sat Oct 28 07:55:06 2017 kern.warn kernel: [ 70.380000] jffs2_build_filesystem(): unlocking the mtd device... done.
Sat Oct 28 07:55:09 2017 kern.warn kernel: [ 70.390000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
Sat Oct 28 07:55:09 2017 kern.notice kernel: [ 73.300000] jffs2: notice: (4097) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Sat Oct 28 07:55:09 2017 daemon.info mount_root: performing overlay whiteout
Sat Oct 28 07:55:09 2017 user.emerg syslog: setting up led USB1
Sat Oct 28 07:55:09 2017 user.emerg syslog: setting up led USB2
Sat Oct 28 07:55:09 2017 user.emerg syslog: setting up led WLAN2G
Sat Oct 28 07:55:09 2017 daemon.info procd: - init complete -
Sat Oct 28 07:55:22 2017 user.notice firewall: Reloading firewall due to ifup of wan6 (eth0.2)
Sat Oct 28 07:56:36 2017 authpriv.info dropbear[4444]: Child connection from 192.168.1.2:61545
Sat Oct 28 07:56:54 2017 authpriv.notice dropbear[4444]: Password auth succeeded for 'root' from 192.168.1.2:61545
Sat Oct 28 07:59:21 2017 authpriv.info dropbear[4444]: Exit (root): Exited normally
Sat Oct 28 07:59:28 2017 authpriv.info dropbear[4559]: Child connection from 192.168.1.2:61559
Sat Oct 28 07:59:38 2017 authpriv.notice dropbear[4559]: Password auth succeeded for 'root' from 192.168.1.2:61559#mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
tmpfs on /tmp/root type tmpfs (rw,noatime,mode=755)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
/dev/mtdblock3 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)Jest dobrze. Teraz sobie ustaw co chcesz.
Witam,
Wielkie dzięki. Działa. Wystarczyło w GUI wpisać hasło: passworld, ehh.
password nie passworld. Choć to drugie też jest ciekawym hasłem 
Strony 1
Zaloguj się lub zarejestruj by napisać odpowiedź
eko.one.pl → Oprogramowanie / Software → Tryb Failsafe i zmiana hasła
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc