• Zarejestrowany: 2016-01-23
  • Posty: 13

Temat: ZTE MF831

Walczę od dłuższego czasu z modem MF831. Z racji że modem pracuje jako router mój router na Gargoyle nie dostaje zewnętrznego adresu IP (stałe IP wykupione). Próbowałem według następującego linku https://technicalexperiments.wordpress. … cdc_ether/
i wszystko przebiega pomyślnie ale modem nie łączy się z internetem. Kolejna uwaga: po dodaniu komendy echo '19d2 0016 ff' > /sys/bus/usb-serial/drivers/option1/new_id pojawiają się kolejno ttyUSB0, 1 i 2. Dodałem komendę również do /etc/rc.local ale po restarcie jakby się nie wykonywała bo widnieje jedynie USB0. Próbowałem łączyć po każdym USB ale nic się nie dzieje...

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,198

Odp: ZTE MF831

Pokaż wynik poleceń:

cat /sys/kernel/debug/usb/devices
uci show network
ifconfig -a

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez Krzesło

  • Zarejestrowany: 2016-01-23
  • Posty: 13

Odp: ZTE MF831

root@Gargoyle:~# cat /sys/kernel/debug/usb/devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  1, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.18
S:  Manufacturer=Linux 3.18.44 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 4
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=05e3 ProdID=0608 Rev=85.36
S:  Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=0016 Rev=f0.70
S:  Manufacturer=ZTE,Incorporated
S:  Product=ZTE WCDMA Technologies MSM
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
root@Gargoyle:~# uci show network
network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.globals=globals
network.globals.ula_prefix='fd63:f5b6:b5c8::/48'
network.lan=interface
network.lan.ifname='eth0.1'
network.lan.force_link='1'
network.lan.type='bridge'
network.lan.proto='static'
network.lan.netmask='255.255.255.0'
network.lan.ip6assign='60'
network.lan.dns='192.168.1.1'
network.lan.ipaddr='192.168.1.1'
network.wan=interface
network.wan.ipv6='0'
network.wan.proto='3g'
network.wan.device='/dev/ttyUSB0'
network.wan.apn='internet'
network.wan.service='umts'
network.wan.mobile_isp='custom'
network.wan6=interface
network.wan6.ifname='eth0.2'
network.wan6.proto='dhcpv6'
network.@switch[0]=switch
network.@switch[0].name='switch0'
network.@switch[0].reset='1'
network.@switch[0].enable_vlan='1'
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device='switch0'
network.@switch_vlan[0].vlan='1'
network.@switch_vlan[0].ports='0t 2 3 4 5'
network.@switch_vlan[1]=switch_vlan
network.@switch_vlan[1].device='switch0'
network.@switch_vlan[1].vlan='2'
network.@switch_vlan[1].ports='0t 1'
network.vpn=interface
network.vpn.ifname='tun0'
network.vpn.proto='none'
network.vpn.defaultroute='0'
network.vpn.peerdns='0'
root@Gargoyle:~# ifconfig -a
br-lan    Link encap:Ethernet  HWaddr 60:E3:27:4A:8F:82
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:472 errors:0 dropped:55 overruns:0 frame:0
          TX packets:311 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:37164 (36.2 KiB)  TX bytes:226634 (221.3 KiB)

eth0      Link encap:Ethernet  HWaddr 60:E3:27:4A:8F:82
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:664 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:67680 (66.0 KiB)
          Interrupt:4

eth0.1    Link encap:Ethernet  HWaddr 60:E3:27:4A:8F:82
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:664 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:65024 (63.5 KiB)

eth0.2    Link encap:Ethernet  HWaddr 60:E3:27:4A:8F:82
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

gre0      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-44-00-00-00-00-00-00-00-00
          NOARP  MTU:1476  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

gretap0   Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1462  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

imq0      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          NOARP  MTU:16000  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:11000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

imq1      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          NOARP  MTU:16000  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:11000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:519 errors:0 dropped:0 overruns:0 frame:0
          TX packets:519 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:32982 (32.2 KiB)  TX bytes:32982 (32.2 KiB)

teql0     Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

tun0      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr 60:E3:27:4A:8F:83
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:498 errors:0 dropped:17 overruns:0 frame:0
          TX packets:522 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:48726 (47.5 KiB)  TX bytes:259984 (253.8 KiB)

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,198

Odp: ZTE MF831

network.wan.device='/dev/ttyUSB2' ustaw, wg opisu na tym porcie powinno działać.

Oryginalnie soft jest typu hostless (jako huawei hilink) i działa jako zwykły router z włąsnym gui. Jeżeli znajdziesz w nim DMZ lub przekierowanie portów to z powodzeniem możesz jego domyślnego trybu używać dla publicznego ip.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez Krzesło

  • Zarejestrowany: 2016-01-23
  • Posty: 13

Odp: ZTE MF831

Właśnie w tym problem że brak DMZ i przekierowania portów a innego firmware nie zmalałem. Pomimo ustawienia USB2 nadal nie łączy. 3ginfo dziwnie się zachowuje. Raz dla USB2 pokazuje połączenie z samą siecią (nie internet) a raz jest to widoczne dla USB1. Za chwile info wygasa. Jakiś pomysł?

6 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,198

Odp: ZTE MF831

gcom -d /dev/ttyUSB0 info
gcom -d /dev/ttyUSB1 info
gcom -d /dev/ttyUSB2 info

Zrób i pokaż co wypisał.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

7 Odpowiedź przez Krzesło

  • Zarejestrowany: 2016-01-23
  • Posty: 13

Odp: ZTE MF831

Może powiem na czym mi zależy: postawiłem OpenVPN na routerze ale przez ten modem nie mogę się połaczyć. a może łatwiej przez DMZ? Opis na forum [link]http://eko.one.pl/forum/viewtopic.php?id=7416&p=4[/link] ale nie wiem jak wygenerować tę komendę.

8 Odpowiedź przez Cezary (edytowany przez Cezary 2016-12-28 11:46:57)

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,198

Odp: ZTE MF831

Zwykłym wgetem

wget "http://192.168.0.1/goform/goform_set_cmd_process?goformId=DMZ_SETTING&DMZEnabled=1&DMZIPAddress=192.168.0.198" -O -

(to jedna linia jest)

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

9 Odpowiedź przez Krzesło

  • Zarejestrowany: 2016-01-23
  • Posty: 13

Odp: ZTE MF831

Przepraszam ale już zgłupiałem.
Jak dokładnie powinna wyglądać komenda żeby mój router w końcu miał publiczny adres. OpenVPN skonfigurowany.
To co dostaje w Gargoyle
Adres IP Wan 192.168.0.198
Maska 255.255.255.0
Brama: 192.168.0.1
DNS WAN 192.168.0.1

Adres IP Lan 192.168.1.1

10 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,198

Odp: ZTE MF831

Twój router nie będzie miał publicznego adresu, bo masz modem na nim który robi jako kolejny router. Jeżeli masz jednak DMZ na modemie to wykonaj to polecenie w w/w poście, wtedy wszystkie porty będziesz miał przekierowane na adres 192.168.0.198.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

11 Odpowiedź przez Krzesło

  • Zarejestrowany: 2016-01-23
  • Posty: 13

Odp: ZTE MF831

Bardzo dziękuje.

12 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,198

Odp: ZTE MF831

PS. Nie prościej by by było sprzedać ten modem na allegro i kupić zwykły który nie sprawiał by Ci takich problemów? Zwykłego E3372 byś kupił.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

13 Odpowiedź przez Krzesło

  • Zarejestrowany: 2016-01-23
  • Posty: 13

Odp: ZTE MF831

Dzięki
Już o tym myślałem i tak zapewne zrobię.
Jeszcze jedno. Skorzystałem z poradnika http://my-router.blogspot.com/2015/09/z … d-get.html i wyszło całkiem nieźle ale następna najważniejsza funkcja nie chce działać => przekierowanie portów. Próba włączenia przez GUI kończy się niepowodzeniem. Czy jest jakiś pomysł jak to zrobić przez wget? Dodatkowo za routerem jest kilka urządzeń do których nie mogę się w pełni dostać z uwagi bo potrzebują odblokowania portów np. 80,443,102,5002,5188,5800,5900,10001,2308,5001,50523  Jak to wykonać..?

14 Odpowiedź przez frutis

  • frutis
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2009-11-10
  • Posty: 1,701

Odp: ZTE MF831

Modem można przełączyć w tryb MBIM poprzez linka http://192.168.8.1/goform/goform_set_cm … usb_mode=9.
Niestety wysłanie komendy za pomocą umbim restartuje modem:

root@OpenWrt:~# umbim pinstate -d /dev/cdc-wdm0 -v
sending (16): 01 00 00 00 10 00 00 00 01 00 00 00 00 04 00 00 
  header_type: 0001
  header_length: 0010
  header_transaction: 0001
ERROR: mbim message timeout

15 Odpowiedź przez dwoz

  • dwoz
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-11-25
  • Posty: 26

Odp: ZTE MF831

Mam problem, modem nie chce łączyć się z nexx wt3020h z lede, postępowałem zgodnie z instrukcją: http://eko.one.pl/?p=openwrt-3g#obsugam … stlessquot
Modem jest wykrywany przez router, ale nie idzie się z nim połączyć, nie można wejść na webui modemu http://192.168.8.1/

root@LEDE:~# ifconfig -a
br-lan    Link encap:Ethernet  HWaddr 20:28:18:A2:6D:56
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fd80:4fa6:bf04::1/60 Scope:Global
          inet6 addr: fe80::2228:18ff:fea2:6d56/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1026 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1135 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:73815 (72.0 KiB)  TX bytes:256934 (250.9 KiB)

eth0      Link encap:Ethernet  HWaddr 20:28:18:A2:6D:56
          inet6 addr: fe80::2228:18ff:fea2:6d56/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:377 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:35777 (34.9 KiB)
          Interrupt:5

eth0.1    Link encap:Ethernet  HWaddr 20:28:18:A2:6D:56
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:183 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:15653 (15.2 KiB)

eth0.2    Link encap:Ethernet  HWaddr 20:28:18:A2:6D:56
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:181 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:15413 (15.0 KiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:144 errors:0 dropped:0 overruns:0 frame:0
          TX packets:144 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:9472 (9.2 KiB)  TX bytes:9472 (9.2 KiB)

usb0      Link encap:Ethernet  HWaddr 36:4B:50:B7:EF:DA
          inet6 addr: fe80::344b:50ff:feb7:efda/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:32 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr 20:28:18:A2:6D:56
          inet6 addr: fe80::2228:18ff:fea2:6d56/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1025 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1310 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:88159 (86.0 KiB)  TX bytes:296363 (289.4 KiB)

root@LEDE:~# logread
Mon Apr  3 10:54:35 2017 kern.info kernel: [  104.969886] usb 1-1: USB disconnect, device number 3
Mon Apr  3 10:54:35 2017 kern.info kernel: [  104.980862] rndis_host 1-1:1.0 usb0: unregister 'rndis_host' usb-101c0000.ehci-1, RNDIS device
Mon Apr  3 10:54:35 2017 daemon.notice netifd: Network device 'usb0' link is down
Mon Apr  3 10:54:35 2017 daemon.notice netifd: Interface 'wan' has link connectivity loss
Mon Apr  3 10:54:35 2017 daemon.notice netifd: wan (1112): udhcpc: read error: Network is down, reopening socket
Mon Apr  3 10:54:35 2017 daemon.notice netifd: Interface 'wan' is disabled
Mon Apr  3 10:54:35 2017 daemon.notice netifd: wan (1112): udhcpc: bind: No such device
Mon Apr  3 10:54:47 2017 kern.info kernel: [  109.251815] usb 1-1: new high-speed USB device number 4 using ehci-platform

root@LEDE:~# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
ping: sendto: Network unreachable

16 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,198

Odp: ZTE MF831

Rozłączyło Ci urządzenie na usb i nie dostałeś adres ip na interfejsie usb0. Wiec nie masz internetu...

To rozłączenie było bo do wyciągnąłeś czy jak? Zrestartuj router i pokaż pełny logread od samego startu urządzenia.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

17 Odpowiedź przez dwoz

  • dwoz
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-11-25
  • Posty: 26

Odp: ZTE MF831

Tak, był to zamierzony restart urządzenia, modem wyciągnąłem i włożyłem z powrotem.

pełny log:

Mon Apr  3 10:50:48 2017 kern.notice kernel: [    0.000000] Linux version 4.4.50 (buildbot@builds-02.infra.lede-project.org) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3103-1b51a49) ) #0 Mon Feb 20 17:13:44 2017
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] Board has DDR1
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] Analog PMU set to hw control
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] Digital PMU set to hw control
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] SoC Type: MediaTek MT7620N ver:2 eco:6
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] MIPS: machine is Nexx WT3020 (8M)
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] Determined physical RAM map:
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000]  memory: 04000000 @ 00000000 (usable)
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] Zone ranges:
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] Movable zone start for each node
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] Early memory node ranges
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Mon Apr  3 10:50:48 2017 kern.debug kernel: [    0.000000] On node 0 totalpages: 16384
Mon Apr  3 10:50:48 2017 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 8035a4b0, node_mem_map 81000000
Mon Apr  3 10:50:48 2017 kern.debug kernel: [    0.000000]   Normal zone: 128 pages used for memmap
Mon Apr  3 10:50:48 2017 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Mon Apr  3 10:50:48 2017 kern.debug kernel: [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
Mon Apr  3 10:50:48 2017 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Mon Apr  3 10:50:48 2017 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Mon Apr  3 10:50:48 2017 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Mon Apr  3 10:50:48 2017 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] Writing ErrCtl register=00004db8
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] Readback ErrCtl register=00004db8
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] Memory: 60964K/65536K available (3012K kernel code, 144K rwdata, 384K rodata, 164K init, 208K bss, 4572K reserved, 0K cma-reserved)
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] NR_IRQS:256
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] CPU Clock: 580MHz
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] systick: enable autosleep mode
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] systick: running - mult: 214748, shift: 32
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.000011] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.015454] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.080594] pid_max: default: 32768 minimum: 301
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.089907] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.102928] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.121921] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.141446] pinctrl core: initialized pinctrl subsystem
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.152982] NET: Registered protocol family 16
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.179520] rt2880_gpio 10000600.gpio: registering 24 gpios
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.190536] rt2880_gpio 10000600.gpio: registering 24 irq handlers
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.202942] rt2880_gpio 10000660.gpio: registering 32 gpios
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.213926] rt2880_gpio 10000660.gpio: registering 32 irq handlers
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.226333] rt2880_gpio 10000688.gpio: registering 1 gpios
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.237131] rt2880_gpio 10000688.gpio: registering 1 irq handlers
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.250562] clocksource: Switched to clocksource systick
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.262240] NET: Registered protocol family 2
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.271816] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.285590] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.298179] TCP: Hash tables configured (established 1024 bind 1024)
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.310899] UDP hash table entries: 256 (order: 0, 4096 bytes)
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.322439] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.335127] NET: Registered protocol family 1
Mon Apr  3 10:50:48 2017 kern.debug kernel: [    0.343696] PCI: CLS 0 bytes, default 32
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.347697] rt-timer 10000100.timer: maximum frequency is 1220Hz
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.360334] futex hash table entries: 256 (order: -1, 3072 bytes)
Mon Apr  3 10:50:48 2017 kern.warn kernel: [    0.372421] Crashlog allocated RAM at address 0x3f00000
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.398535] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.410041] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.432089] io scheduler noop registered
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.439730] io scheduler deadline registered (default)
Mon Apr  3 10:50:48 2017 kern.err kernel: [    0.450221] ralink-usb-phy usbphy: invalid resource
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.460367] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.476354] console [ttyS0] disabled
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.483393] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.503070] console [ttyS0] enabled
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.516891] bootconsole [early0] disabled
Mon Apr  3 10:50:48 2017 kern.warn kernel: [    0.539247] spi spi0.0: force spi mode3
Mon Apr  3 10:50:48 2017 kern.info kernel: [    0.547458] m25p80 spi0.0: s25fl064k (8192 Kbytes)
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    0.557069] 4 ofpart partitions found on MTD device spi0.0
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    0.568001] Creating 4 MTD partitions on "spi0.0":
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    0.577555] 0x000000000000-0x000000030000 : "u-boot"
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    0.589200] 0x000000030000-0x000000040000 : "u-boot-env"
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    0.601703] 0x000000040000-0x000000050000 : "factory"
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    0.613629] 0x000000050000-0x000000800000 : "firmware"
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    1.273479] 2 uimage-fw partitions found on MTD device firmware
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    1.285313] 0x000000050000-0x00000017807e : "kernel"
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    1.296800] 0x00000017807e-0x000000800000 : "rootfs"
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    1.308501] mtd: device 5 (rootfs) set to be root filesystem
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    1.319977] 1 squashfs-split partitions found on MTD device rootfs
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    1.332308] 0x0000003af000-0x000000800000 : "rootfs_data"
Mon Apr  3 10:50:48 2017 kern.info kernel: [    1.347872] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
Mon Apr  3 10:50:48 2017 kern.info kernel: [    1.360505] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
Mon Apr  3 10:50:48 2017 kern.info kernel: [    1.377529] rt2880_wdt 10000120.watchdog: Initialized
Mon Apr  3 10:50:48 2017 kern.info kernel: [    1.389030] NET: Registered protocol family 10
Mon Apr  3 10:50:48 2017 kern.info kernel: [    1.402330] NET: Registered protocol family 17
Mon Apr  3 10:50:48 2017 kern.info kernel: [    1.411326] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Mon Apr  3 10:50:48 2017 kern.info kernel: [    1.436468] 8021q: 802.1Q VLAN Support v1.8
Mon Apr  3 10:50:48 2017 kern.info kernel: [    1.456991] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
Mon Apr  3 10:50:48 2017 kern.info kernel: [    1.471981] Freeing unused kernel memory: 164K (80377000 - 803a0000)
Mon Apr  3 10:50:48 2017 user.info kernel: [    3.917374] init: Console is alive
Mon Apr  3 10:50:48 2017 user.info kernel: [    3.924484] init: - watchdog -
Mon Apr  3 10:50:48 2017 user.info kernel: [    5.469427] init: - preinit -
Mon Apr  3 10:50:48 2017 kern.info kernel: [    6.635561] 8021q: adding VLAN 0 to HW filter on device eth0
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    6.789564] random: procd: uninitialized urandom read (4 bytes read, 10 bits of entropy available)
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    8.212459] jffs2: notice: (332) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Mon Apr  3 10:50:48 2017 user.info kernel: [    8.250710] mount_root: switching to jffs2 overlay
Mon Apr  3 10:50:48 2017 user.warn kernel: [    8.276100] urandom-seed: Seeding with /etc/urandom.seed
Mon Apr  3 10:50:48 2017 user.info kernel: [    8.414153] procd: - early -
Mon Apr  3 10:50:48 2017 user.info kernel: [    8.419981] procd: - watchdog -
Mon Apr  3 10:50:48 2017 user.info kernel: [    8.674476] procd: - ubus -
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    8.890102] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    8.983895] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    9.002319] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    9.020361] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    9.039381] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    9.058345] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    9.076483] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
Mon Apr  3 10:50:48 2017 kern.notice kernel: [    9.094563] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
Mon Apr  3 10:50:48 2017 user.info kernel: [    9.113569] procd: - init -
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.102186] usbcore: registered new interface driver usbfs
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.113307] usbcore: registered new interface driver hub
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.124059] usbcore: registered new device driver usb
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.186889] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.202606] ehci-platform: EHCI generic platform driver
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.223392] phy phy-usbphy.0: remote usb device wakeup disabled
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.235205] phy phy-usbphy.0: UTMI 16bit 30MHz
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.244087] ehci-platform 101c0000.ehci: EHCI Host Controller
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.255579] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.271479] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.288888] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.303900] hub 1-0:1.0: USB hub found
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.319061] hub 1-0:1.0: 1 port detected
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.343292] ip6_tables: (C) 2000-2006 Netfilter Core Team
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.382414] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.397570] Backport generated by backports.git backports-20160324-9-g0e38f5c
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.486317] ip_tables: (C) 2000-2006 Netfilter Core Team
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.508424] nf_conntrack version 0.5.0 (955 buckets, 3820 max)
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.606219] xt_time: kernel timezone is -0000
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.619133] usbcore: registered new interface driver cdc_ether
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.654768] PPP generic driver version 2.4.2
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.664715] usb 1-1: new high-speed USB device number 2 using ehci-platform
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.680167] NET: Registered protocol family 24
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.692960] usbcore: registered new interface driver rndis_host
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.722744] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory"
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.737227] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0500 detected
Mon Apr  3 10:50:48 2017 kern.info kernel: [   10.752684] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 7620 detected
Mon Apr  3 10:50:48 2017 kern.debug kernel: [   10.767075] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Mon Apr  3 10:50:48 2017 kern.info kernel: [   11.093001] rndis_host 1-1:1.0 usb0: register 'rndis_host' at usb-101c0000.ehci-1, RNDIS device, 36:4b:50:b7:ef:da
Mon Apr  3 10:50:48 2017 kern.notice kernel: [   11.982932] random: jshn: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
Mon Apr  3 10:50:49 2017 user.notice : Added device handler type: 8021ad
Mon Apr  3 10:50:49 2017 user.notice : Added device handler type: 8021q
Mon Apr  3 10:50:49 2017 user.notice : Added device handler type: macvlan
Mon Apr  3 10:50:49 2017 user.notice : Added device handler type: bridge
Mon Apr  3 10:50:49 2017 user.notice : Added device handler type: Network device
Mon Apr  3 10:50:49 2017 user.notice : Added device handler type: tunnel
Mon Apr  3 10:50:51 2017 authpriv.info dropbear[744]: Not backgrounding
Mon Apr  3 10:50:52 2017 user.notice : setting up led power
Mon Apr  3 10:50:53 2017 kern.info kernel: [   18.111835] 8021q: adding VLAN 0 to HW filter on device eth0
Mon Apr  3 10:50:53 2017 kern.info kernel: [   18.142643] device eth0.1 entered promiscuous mode
Mon Apr  3 10:50:53 2017 kern.info kernel: [   18.152275] device eth0 entered promiscuous mode
Mon Apr  3 10:50:53 2017 kern.info kernel: [   18.199885] br-lan: port 1(eth0.1) entered forwarding state
Mon Apr  3 10:50:53 2017 kern.info kernel: [   18.211086] br-lan: port 1(eth0.1) entered forwarding state
Mon Apr  3 10:50:53 2017 daemon.notice netifd: Interface 'lan' is enabled
Mon Apr  3 10:50:53 2017 daemon.notice netifd: Interface 'lan' is setting up now
Mon Apr  3 10:50:53 2017 daemon.notice netifd: Interface 'lan' is now up
Mon Apr  3 10:50:53 2017 kern.info kernel: [   18.298982] device eth0.2 entered promiscuous mode
Mon Apr  3 10:50:53 2017 kern.info kernel: [   18.308671] br-lan: port 2(eth0.2) entered forwarding state
Mon Apr  3 10:50:53 2017 kern.info kernel: [   18.319853] br-lan: port 2(eth0.2) entered forwarding state
Mon Apr  3 10:50:54 2017 daemon.notice netifd: Interface 'loopback' is enabled
Mon Apr  3 10:50:54 2017 daemon.notice netifd: Interface 'loopback' is setting up now
Mon Apr  3 10:50:54 2017 daemon.notice netifd: Interface 'loopback' is now up
Mon Apr  3 10:50:54 2017 daemon.notice netifd: Interface 'wan' is enabled
Mon Apr  3 10:50:54 2017 daemon.info odhcpd[707]: Raising SIGUSR1 due to address change on br-lan
Mon Apr  3 10:50:54 2017 daemon.notice netifd: bridge 'br-lan' link is up
Mon Apr  3 10:50:54 2017 daemon.notice netifd: Interface 'lan' has link connectivity
Mon Apr  3 10:50:54 2017 daemon.notice netifd: Network device 'eth0' link is up
Mon Apr  3 10:50:54 2017 daemon.notice netifd: VLAN 'eth0.1' link is up
Mon Apr  3 10:50:54 2017 daemon.notice netifd: VLAN 'eth0.2' link is up
Mon Apr  3 10:50:54 2017 daemon.notice netifd: Network device 'lo' link is up
Mon Apr  3 10:50:54 2017 daemon.notice netifd: Interface 'loopback' has link connectivity
Mon Apr  3 10:50:54 2017 daemon.notice netifd: Network device 'usb0' link is up
Mon Apr  3 10:50:54 2017 daemon.notice netifd: Interface 'wan' has link connectivity
Mon Apr  3 10:50:54 2017 daemon.notice netifd: Interface 'wan' is setting up now
Mon Apr  3 10:50:54 2017 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Mon Apr  3 10:50:54 2017 daemon.notice netifd: wan (873): udhcpc: started, v1.25.1
Mon Apr  3 10:50:55 2017 daemon.info odhcpd[707]: Initial RA router lifetime 0, 1 address(es) available on br-lan
Mon Apr  3 10:50:55 2017 daemon.notice netifd: wan (873): udhcpc: sending discover
Mon Apr  3 10:50:55 2017 daemon.notice netifd: radio0 (850): command failed: Not supported (-122)
Mon Apr  3 10:50:55 2017 daemon.info procd: - init complete -
Mon Apr  3 10:50:56 2017 kern.info kernel: [   20.208831] br-lan: port 1(eth0.1) entered forwarding state
Mon Apr  3 10:50:56 2017 kern.info kernel: [   20.437024] br-lan: port 2(eth0.2) entered forwarding state
Mon Apr  3 10:50:56 2017 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Mon Apr  3 10:50:56 2017 kern.info kernel: [   21.171085] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mon Apr  3 10:50:56 2017 kern.info kernel: [   21.202856] device wlan0 entered promiscuous mode
Mon Apr  3 10:50:56 2017 kern.info kernel: [   21.212375] br-lan: port 3(wlan0) entered forwarding state
Mon Apr  3 10:50:56 2017 kern.info kernel: [   21.223357] br-lan: port 3(wlan0) entered forwarding state
Mon Apr  3 10:50:56 2017 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Mon Apr  3 10:50:56 2017 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->HT_SCAN
Mon Apr  3 10:50:57 2017 kern.info kernel: [   21.428244] br-lan: port 3(wlan0) entered disabled state
Mon Apr  3 10:50:58 2017 daemon.notice netifd: wan (873): udhcpc: sending discover
Mon Apr  3 10:50:58 2017 daemon.notice hostapd: 20/40 MHz operation not permitted on channel pri=6 sec=10 based on overlapping BSSes
Mon Apr  3 10:50:58 2017 daemon.err hostapd: Using interface wlan0 with hwaddr 20:28:18:a2:6d:56 and ssid "LEDE"
Mon Apr  3 10:50:58 2017 kern.info kernel: [   21.952592] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mon Apr  3 10:50:58 2017 kern.info kernel: [   21.965459] br-lan: port 3(wlan0) entered forwarding state
Mon Apr  3 10:50:58 2017 kern.info kernel: [   21.976460] br-lan: port 3(wlan0) entered forwarding state
Mon Apr  3 10:50:58 2017 daemon.notice hostapd: wlan0: interface state HT_SCAN->ENABLED
Mon Apr  3 10:50:58 2017 daemon.notice hostapd: wlan0: AP-ENABLED
Mon Apr  3 10:50:58 2017 daemon.notice netifd: Network device 'wlan0' link is up
Mon Apr  3 10:50:59 2017 daemon.info hostapd: wlan0: STA 78:e4:00:26:53:82 IEEE 802.11: authenticated
Mon Apr  3 10:50:59 2017 daemon.info hostapd: wlan0: STA 78:e4:00:26:53:82 IEEE 802.11: associated (aid 1)
Mon Apr  3 10:50:59 2017 daemon.notice hostapd: wlan0: AP-STA-CONNECTED 78:e4:00:26:53:82
Mon Apr  3 10:50:59 2017 daemon.notice odhcpd[707]: Got DHCPv6 request
Mon Apr  3 10:50:59 2017 daemon.warn odhcpd[707]: DHCPV6 SOLICIT IA_NA from 000100011662aab00024547e1e8a on br-lan: ok fd80:4fa6:bf04::8b5/128
Mon Apr  3 10:51:00 2017 daemon.info odhcpd[707]: Initial RA router lifetime 0, 1 address(es) available on br-lan
Mon Apr  3 10:51:00 2017 daemon.info dnsmasq[1045]: started, version 2.76 cachesize 150
Mon Apr  3 10:51:00 2017 daemon.info dnsmasq[1045]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Mon Apr  3 10:51:00 2017 daemon.info dnsmasq[1045]: DNS service limited to local subnets
Mon Apr  3 10:51:00 2017 daemon.info dnsmasq-dhcp[1045]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Mon Apr  3 10:51:00 2017 daemon.info dnsmasq[1045]: using local addresses only for domain lan
Mon Apr  3 10:51:00 2017 daemon.warn dnsmasq[1045]: no servers found in /tmp/resolv.conf.auto, will retry
Mon Apr  3 10:51:00 2017 daemon.info dnsmasq[1045]: read /etc/hosts - 4 addresses
Mon Apr  3 10:51:00 2017 daemon.info dnsmasq[1045]: read /tmp/hosts/odhcpd - 0 addresses
Mon Apr  3 10:51:00 2017 daemon.info dnsmasq[1045]: read /tmp/hosts/dhcp.cfg02411c - 2 addresses
Mon Apr  3 10:51:00 2017 daemon.info dnsmasq-dhcp[1045]: read /etc/ethers - 0 addresses
Mon Apr  3 10:51:00 2017 kern.info kernel: [   22.934622] br-lan: port 3(wlan0) entered forwarding state
Mon Apr  3 10:51:00 2017 daemon.notice odhcpd[707]: Got DHCPv6 request
Mon Apr  3 10:51:00 2017 daemon.warn odhcpd[707]: DHCPV6 REQUEST IA_NA from 000100011662aab00024547e1e8a on br-lan: ok fd80:4fa6:bf04::8b5/128
Mon Apr  3 10:51:00 2017 daemon.info dnsmasq[1045]: read /etc/hosts - 4 addresses
Mon Apr  3 10:51:00 2017 daemon.info dnsmasq[1045]: read /tmp/hosts/odhcpd - 1 addresses
Mon Apr  3 10:51:00 2017 daemon.info dnsmasq[1045]: read /tmp/hosts/dhcp.cfg02411c - 2 addresses
Mon Apr  3 10:51:00 2017 daemon.info dnsmasq-dhcp[1045]: read /etc/ethers - 0 addresses
Mon Apr  3 10:51:01 2017 daemon.notice netifd: wan (873): udhcpc: sending discover
Mon Apr  3 10:51:04 2017 daemon.info odhcpd[707]: Initial RA router lifetime 0, 1 address(es) available on br-lan
Mon Apr  3 10:51:04 2017 daemon.info dnsmasq-dhcp[1045]: DHCPREQUEST(br-lan) 192.168.1.211 78:e4:00:26:53:82
Mon Apr  3 10:51:04 2017 daemon.info dnsmasq-dhcp[1045]: DHCPACK(br-lan) 192.168.1.211 78:e4:00:26:53:82 r580-PC
Mon Apr  3 10:51:08 2017 daemon.info odhcpd[707]: Initial RA router lifetime 0, 1 address(es) available on br-lan
Mon Apr  3 10:51:31 2017 authpriv.info dropbear[1052]: Child connection from 192.168.1.211:50669
Mon Apr  3 10:51:35 2017 authpriv.notice dropbear[1052]: Auth succeeded with blank password for 'root' from 192.168.1.211:50669
Mon Apr  3 10:51:37 2017 kern.notice kernel: [   36.157066] random: nonblocking pool is initialized

18 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,198

Odp: ZTE MF831

Nie ma za grosz informacji o przyznaniu adresu na wanie. Masz zwykłego linuksa, może być nawet live? Podłącz, zobacz czy pojawi się adres na interfejsie i czy będziesz miał internet.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

19 Odpowiedź przez dwoz

  • dwoz
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-11-25
  • Posty: 26

Odp: ZTE MF831

mam drugi router xiaomi mi nano z firmware padavan i tam ten modem działa bez problemu. chciałem przesiąść się na nexx ze względu na większą wydajność USB.

20 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,198

Odp: ZTE MF831

Pokaz logi z tego padavana.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

21 Odpowiedź przez dwoz

  • dwoz
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-11-25
  • Posty: 26

Odp: ZTE MF831

Oct  3 00:24:40 syslogd started: BusyBox v1.24.2
Oct  3 00:24:40 MI-MINI: firmware version: 3.4.3.9-099_7a6fb0f
Oct  3 00:24:40 kernel: klogd started: BusyBox v1.24.2 (2016-06-30 01:13:35 UTC)
Oct  3 00:24:40 kernel: Linux version 3.4.112 (padavan@hms) (gcc version 4.4.7 (GCC) ) #1 Thu Jun 30 01:07:46 UTC 2016
Oct  3 00:24:40 kernel: MediaTek SoC: MT7620A, RevID: 0206, RAM: DDR2, XTAL: 20MHz
Oct  3 00:24:40 kernel: CPU/OCP/SYS frequency: 600/200/200 MHz
Oct  3 00:24:40 kernel: CPU revision is: 00019650 (MIPS 24KEc)
Oct  3 00:24:40 kernel: Determined physical RAM map:
Oct  3 00:24:40 kernel:  memory: 08000000 @ 00000000 (usable)
Oct  3 00:24:40 kernel: Zone PFN ranges:
Oct  3 00:24:40 kernel:   Normal   0x00000000 -> 0x00008000
Oct  3 00:24:40 kernel: Movable zone start PFN for each node
Oct  3 00:24:40 kernel: Early memory PFN ranges
Oct  3 00:24:40 kernel:     0: 0x00000000 -> 0x00008000
Oct  3 00:24:40 kernel: On node 0 totalpages: 32768
Oct  3 00:24:40 kernel: free_area_init_node: node 0, pgdat 8031a220, node_mem_map 81000000
Oct  3 00:24:40 kernel:   Normal zone: 256 pages used for memmap
Oct  3 00:24:40 kernel:   Normal zone: 0 pages reserved
Oct  3 00:24:40 kernel:   Normal zone: 32512 pages, LIFO batch:7
Oct  3 00:24:40 kernel: Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Oct  3 00:24:40 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Oct  3 00:24:40 kernel: pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Oct  3 00:24:40 kernel: pcpu-alloc: [0] 0
Oct  3 00:24:40 kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Oct  3 00:24:40 kernel: Kernel command line: console=ttyS0,115200n8 root=/dev/mtdblock4 rootfstype=squashfs
Oct  3 00:24:40 kernel: PID hash table entries: 512 (order: -1, 2048 bytes)
Oct  3 00:24:40 kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Oct  3 00:24:40 kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Oct  3 00:24:40 kernel: Writing ErrCtl register=0007200a
Oct  3 00:24:40 kernel: Readback ErrCtl register=0007200a
Oct  3 00:24:40 kernel: Memory: 126436k/131072k available (2762k kernel code, 4636k reserved, 415k data, 212k init, 0k highmem)
Oct  3 00:24:40 kernel: NR_IRQS:40
Oct  3 00:24:40 kernel: console [ttyS0] enabled
Oct  3 00:24:40 kernel: Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
Oct  3 00:24:40 kernel: pid_max: default: 32768 minimum: 301
Oct  3 00:24:40 kernel: Mount-cache hash table entries: 512
Oct  3 00:24:40 kernel: NET: Registered protocol family 16
Oct  3 00:24:40 kernel: bio: create slab <bio-0> at 0
Oct  3 00:24:40 kernel: SCSI subsystem initialized
Oct  3 00:24:40 kernel: usbcore: registered new interface driver usbfs
Oct  3 00:24:40 kernel: usbcore: registered new interface driver hub
Oct  3 00:24:40 kernel: usbcore: registered new device driver usb
Oct  3 00:24:40 kernel: PCI host bridge to bus 0000:00
Oct  3 00:24:40 kernel: pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
Oct  3 00:24:40 kernel: pci_bus 0000:00: root bus resource [io  0x10160000-0x1016ffff]
Oct  3 00:24:40 kernel: pci 0000:00:00.0: [1814:0801] type 01 class 0x060400
Oct  3 00:24:40 kernel: pci 0000:00:00.0: supports D1
Oct  3 00:24:40 kernel: pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Oct  3 00:24:40 kernel: pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Oct  3 00:24:40 kernel: pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
Oct  3 00:24:40 kernel: pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
Oct  3 00:24:40 kernel: pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Oct  3 00:24:40 kernel: pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Oct  3 00:24:40 kernel: pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
Oct  3 00:24:40 kernel: pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]
Oct  3 00:24:40 kernel: pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
Oct  3 00:24:40 kernel: pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]
Oct  3 00:24:40 kernel: pci 0000:00:00.0: PCI bridge to [bus 01-01]
Oct  3 00:24:40 kernel: pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff]
Oct  3 00:24:40 kernel: pci 0000:00:00.0:   bridge window [mem 0x20100000-0x201fffff pref]
Oct  3 00:24:40 kernel: PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Oct  3 00:24:40 kernel: Switching to clocksource MIPS
Oct  3 00:24:40 kernel: NET: Registered protocol family 2
Oct  3 00:24:40 kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Oct  3 00:24:40 kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Oct  3 00:24:40 kernel: TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Oct  3 00:24:40 kernel: TCP: Hash tables configured (established 4096 bind 4096)
Oct  3 00:24:40 kernel: TCP: reno registered
Oct  3 00:24:40 kernel: UDP hash table entries: 256 (order: 0, 4096 bytes)
Oct  3 00:24:40 kernel: NET: Registered protocol family 1
Oct  3 00:24:40 kernel: PCI: CLS 32 bytes, default 32
Oct  3 00:24:40 kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Oct  3 00:24:40 kernel: msgmni has been set to 246
Oct  3 00:24:40 kernel: io scheduler noop registered (default)
Oct  3 00:24:40 kernel: Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Oct  3 00:24:40 kernel: serial8250: ttyS0 at MMIO 0x10000c00 (irq = 20) is a 16550A
Oct  3 00:24:40 kernel: Ralink GPIO driver initialized. Number of GPIO: 73, GPIO mode: 0018131D
Oct  3 00:24:40 kernel: loop: module loaded
Oct  3 00:24:40 kernel: Ralink SPI flash driver, SPI clock: 25MHz
Oct  3 00:24:40 kernel: SPI flash chip: W25Q128FV (ef 40180000) (16384 Kbytes)
Oct  3 00:24:40 kernel: Creating 7 MTD partitions on "raspi":
Oct  3 00:24:40 kernel: 0x000000000000-0x000000030000 : "Bootloader"
Oct  3 00:24:40 kernel: 0x000000030000-0x000000040000 : "Config"
Oct  3 00:24:40 kernel: 0x000000040000-0x000000050000 : "Factory"
Oct  3 00:24:40 kernel: 0x000000050000-0x00000016e2a0 : "Kernel"
Oct  3 00:24:40 kernel: 0x00000016e2a0-0x000000fc0000 : "RootFS"
Oct  3 00:24:40 kernel: 0x000000fc0000-0x000001000000 : "Storage"
Oct  3 00:24:40 kernel: 0x000000050000-0x000000fc0000 : "Firmware_Stub"
Oct  3 00:24:40 kernel: tun: Universal TUN/TAP device driver, 1.6
Oct  3 00:24:40 kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Oct  3 00:24:40 kernel: Ralink APSoC Ethernet Driver v3.2.4 (raeth)
Oct  3 00:24:40 kernel: raeth: PDMA RX ring 256, PDMA TX ring 512. Max packet size 1536
Oct  3 00:24:40 kernel: raeth: NAPI support, weight 32
Oct  3 00:24:40 kernel: raeth: Byte Queue Limits (BQL) support
Oct  3 00:24:40 kernel: PPP generic driver version 2.4.2
Oct  3 00:24:40 kernel: PPP MPPE Compression module registered
Oct  3 00:24:40 kernel: NET: Registered protocol family 24
Oct  3 00:24:40 kernel: PPTP driver version 0.8.5
Oct  3 00:24:40 kernel: usbcore: registered new interface driver libusual
Oct  3 00:24:40 kernel: nf_conntrack version 0.5.0 (16384 buckets, 32768 max)
Oct  3 00:24:40 kernel: xt_time: kernel timezone is -0000
Oct  3 00:24:40 kernel: Bridge firewalling registered
Oct  3 00:24:40 kernel: gre: GRE over IPv4 demultiplexor driver
Oct  3 00:24:40 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Oct  3 00:24:40 kernel: TCP: cubic registered
Oct  3 00:24:40 kernel: NET: Registered protocol family 10
Oct  3 00:24:40 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Oct  3 00:24:40 kernel: IPv6 over IPv4 tunneling driver
Oct  3 00:24:40 kernel: NET: Registered protocol family 17
Oct  3 00:24:40 kernel: L2TP core driver, V2.0
Oct  3 00:24:40 kernel: PPPoL2TP kernel driver, V2.0
Oct  3 00:24:40 kernel: 8021q: 802.1Q VLAN Support v1.8
Oct  3 00:24:40 kernel: ASUS NVRAM, v0.08. Available space: 61440. Integrity: OK
Oct  3 00:24:40 kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
Oct  3 00:24:40 kernel: Freeing unused kernel memory: 212k freed
Oct  3 00:24:40 kernel: Algorithmics/MIPS FPU Emulator v1.5
Oct  3 00:24:40 kernel: rt2860v2_ap: module license 'Proprietary' taints kernel.
Oct  3 00:24:40 kernel: APSoC AP Driver version: 2.7.2.0
Oct  3 00:24:40 kernel: PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
Oct  3 00:24:40 kernel: MT76x2 AP Driver version: 3.0.4.0.P1
Oct  3 00:24:40 kernel: usbcore: registered new interface driver usblp
Oct  3 00:24:40 kernel: Initializing USB Mass Storage driver...
Oct  3 00:24:40 kernel: usbcore: registered new interface driver usb-storage
Oct  3 00:24:40 kernel: USB Mass Storage support registered.
Oct  3 00:24:40 kernel: usbcore: registered new interface driver cdc_ether
Oct  3 00:24:40 kernel: usbcore: registered new interface driver rndis_host
Oct  3 00:24:40 kernel: usbcore: registered new interface driver cdc_wdm
Oct  3 00:24:40 kernel: usbcore: registered new interface driver qmi_wwan
Oct  3 00:24:40 kernel: usbcore: registered new interface driver cdc_ncm
Oct  3 00:24:40 kernel: usbcore: registered new interface driver huawei_cdc_ncm
Oct  3 00:24:40 kernel: usbcore: registered new interface driver cdc_mbim
Oct  3 00:24:40 kernel: usbcore: registered new interface driver sierra_net
Oct  3 00:24:40 kernel: usbcore: registered new interface driver usbserial
Oct  3 00:24:40 kernel: usbcore: registered new interface driver usbserial_generic
Oct  3 00:24:40 kernel: USB Serial support registered for generic
Oct  3 00:24:40 kernel: usbserial: USB Serial Driver core
Oct  3 00:24:40 kernel: usbcore: registered new interface driver qcserial
Oct  3 00:24:40 kernel: USB Serial support registered for Qualcomm USB modem
Oct  3 00:24:40 kernel: usbcore: registered new interface driver sierra
Oct  3 00:24:40 kernel: USB Serial support registered for Sierra USB modem
Oct  3 00:24:40 kernel: usbcore: registered new interface driver option
Oct  3 00:24:40 kernel: USB Serial support registered for GSM modem (1-port)
Oct  3 00:24:40 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct  3 00:24:40 kernel: ehci-platform ehci-platform: Generic Platform EHCI Controller
Oct  3 00:24:40 kernel: ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Oct  3 00:24:40 kernel: ehci-platform ehci-platform: irq 26, io mem 0x101c0000
Oct  3 00:24:40 kernel: ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored
Oct  3 00:24:40 kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Oct  3 00:24:40 kernel: usb usb1: Product: Generic Platform EHCI Controller
Oct  3 00:24:40 kernel: usb usb1: Manufacturer: Linux 3.4.112 ehci_hcd
Oct  3 00:24:40 kernel: usb usb1: SerialNumber: ehci-platform
Oct  3 00:24:40 kernel: hub 1-0:1.0: USB hub found
Oct  3 00:24:40 kernel: hub 1-0:1.0: 1 port detected
Oct  3 00:24:40 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct  3 00:24:40 kernel: ohci-platform ohci-platform: Generic Platform OHCI Controller
Oct  3 00:24:40 kernel: ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
Oct  3 00:24:40 kernel: ohci-platform ohci-platform: irq 26, io mem 0x101c1000
Oct  3 00:24:40 kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Oct  3 00:24:40 kernel: usb usb2: Product: Generic Platform OHCI Controller
Oct  3 00:24:40 kernel: usb usb2: Manufacturer: Linux 3.4.112 ohci_hcd
Oct  3 00:24:40 kernel: usb usb2: SerialNumber: ohci-platform
Oct  3 00:24:40 kernel: hub 2-0:1.0: USB hub found
Oct  3 00:24:40 kernel: hub 2-0:1.0: 1 port detected
Oct  3 00:24:40 kernel: usb 1-1: new high-speed USB device number 2 using ehci-platform
Oct  3 00:24:40 kernel: raeth: HW IP/TCP/UDP checksum RX/TX offload enabled
Oct  3 00:24:40 kernel: raeth: HW VLAN TX offload enabled
Oct  3 00:24:40 kernel: raeth: HW Scatter/Gather TX offload enabled
Oct  3 00:24:40 kernel: mtk_esw - hw bridge: W|LLLL
Oct  3 00:24:40 kernel: usb 1-1: New USB device found, idVendor=05c6, idProduct=9024
Oct  3 00:24:40 kernel: usb 1-1: Product: ZTE Wireless Ethernet Adapter
Oct  3 00:24:40 kernel: usb 1-1: Manufacturer: ZTE,Incorporated
Oct  3 00:24:40 kernel: usb 1-1: SerialNumber: MF8310ZTED000000CP261718HNL0ZVY1TGG47X8_8_6D74&&&&&&&&&&&&&&&&&0
Oct  3 00:24:40 kernel: rndis_host 1-1:1.0: weth0: register 'rndis_host' at usb-ehci-platform-1, RNDIS device, 36:4b:50:b7:ef:da
Oct  3 00:24:42 kernel: device eth2.1 entered promiscuous mode
Oct  3 00:24:42 kernel: device eth2 entered promiscuous mode
Oct  3 00:24:43 kernel: device ra0 entered promiscuous mode
Oct  3 00:24:43 kernel: device ra1 entered promiscuous mode
Oct  3 00:24:44 kernel: br0: port 3(ra1) entered forwarding state
Oct  3 00:24:44 kernel: br0: port 2(ra0) entered forwarding state
Oct  3 00:24:44 kernel: br0: port 1(eth2.1) entered forwarding state
Oct  3 00:24:44 kernel: mtk_esw - hardware IGMP/MLD snooping: off
Oct  3 00:24:44 dnsmasq[443]: started, version 2.76 cachesize 1024
Oct  3 00:24:44 dnsmasq[443]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Oct  3 00:24:44 dnsmasq-dhcp[443]: DHCP, IP range 192.168.1.2 -- 192.168.1.244, lease time 1d
Oct  3 00:24:44 dnsmasq-dhcp[443]: DHCP, sockets bound exclusively to interface br0
Oct  3 00:24:44 dnsmasq[443]: read /etc/hosts - 3 addresses
Oct  3 00:24:44 dnsmasq[443]: read /etc/storage/dnsmasq/hosts - 0 addresses
Oct  3 00:24:44 dnsmasq-dhcp[443]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Oct  3 00:24:45 kernel: Ralink HW NAT v2.52.0 Module Enabled, FoE Size: 16384
Oct  3 00:24:45 MI-MINI: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Oct  3 00:24:45 MI-MINI: Hardware NAT/Routing: IPv4 UDP flow offload - ON
Oct  3 00:24:45 MI-MINI: Hardware NAT/Routing: IPv6 routes offload - OFF
Oct  3 00:24:45 DHCP WAN Client: starting on eth2.2 ...
Oct  3 00:24:45 miniupnpd[478]: version 2.0 starting UPnP-IGD ext if eth2.2 BOOTID=1475447085
Oct  3 00:24:45 miniupnpd[478]: HTTP listening on port 31040
Oct  3 00:24:45 httpd[472]: Server listening port 80 (HTTP).
Oct  3 00:24:46 kernel: br0: port 3(ra1) entered forwarding state
Oct  3 00:24:46 kernel: br0: port 2(ra0) entered forwarding state
Oct  3 00:24:46 kernel: br0: port 1(eth2.1) entered forwarding state
Oct  3 00:24:50 USB hotplug: try start USB Modem as WAN connection...
Oct  3 00:24:51 MI-MINI: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Oct  3 00:24:51 MI-MINI: Hardware NAT/Routing: IPv4 UDP flow offload - ON
Oct  3 00:24:51 MI-MINI: Hardware NAT/Routing: IPv6 routes offload - OFF
Oct  3 00:24:51 dnsmasq[443]: read /etc/hosts - 3 addresses
Oct  3 00:24:51 dnsmasq[443]: read /etc/storage/dnsmasq/hosts - 0 addresses
Oct  3 00:24:51 dnsmasq-dhcp[443]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Oct  3 00:24:51 dnsmasq[443]: using nameserver 8.8.8.8#53
Oct  3 00:24:51 miniupnpd[478]: shutting down MiniUPnPd
Oct  3 00:24:51 DHCP WAN Client: starting on weth0 ...
Oct  3 00:26:32 MI-MINI: Perform WAN manual reconnect
Oct  3 00:26:33 MI-MINI: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Oct  3 00:26:33 MI-MINI: Hardware NAT/Routing: IPv4 UDP flow offload - ON
Oct  3 00:26:33 MI-MINI: Hardware NAT/Routing: IPv6 routes offload - OFF
Oct  3 00:26:33 dnsmasq[443]: read /etc/hosts - 3 addresses
Oct  3 00:26:33 dnsmasq[443]: read /etc/storage/dnsmasq/hosts - 0 addresses
Oct  3 00:26:33 dnsmasq-dhcp[443]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Oct  3 00:26:33 dnsmasq[443]: using nameserver 8.8.8.8#53
Oct  3 00:26:33 DHCP WAN Client: starting on weth0 ...
Oct  3 00:26:54 kernel: usb 1-1: USB disconnect, device number 2
Oct  3 00:26:54 kernel: rndis_host 1-1:1.0: weth0: unregister 'rndis_host' usb-ehci-platform-1, RNDIS device
Oct  3 00:27:00 MI-MINI: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Oct  3 00:27:00 MI-MINI: Hardware NAT/Routing: IPv4 UDP flow offload - ON
Oct  3 00:27:00 MI-MINI: Hardware NAT/Routing: IPv6 routes offload - OFF
Oct  3 00:27:00 DHCP WAN Client: starting on eth2.2 ...
Oct  3 00:27:05 kernel: usb 1-1: new high-speed USB device number 3 using ehci-platform
Oct  3 00:27:06 kernel: usb 1-1: New USB device found, idVendor=19d2, idProduct=1225
Oct  3 00:27:06 kernel: usb 1-1: Product: ZTE Wireless Ethernet Adapter
Oct  3 00:27:06 kernel: usb 1-1: Manufacturer: ZTE,Incorporated
Oct  3 00:27:06 kernel: usb 1-1: SerialNumber: MF8310ZTED000000CP261718HNL0ZVY1TGG47X8_8_6D74&&&&&&&&&&&&&&&&&0
Oct  3 00:27:06 kernel: usb-storage 1-1:1.0: Quirks match for vid 19d2 pid 1225: 1
Oct  3 00:27:06 kernel: scsi0 : usb-storage 1-1:1.0
Oct  3 00:27:09 kernel: scsi 0:0:0:0: CD-ROM            CWID     USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
Oct  3 00:27:09 kernel: scsi 0:0:0:0: Attached scsi generic sg0 type 5
Oct  3 00:27:09 usb_modeswitch: switch device 19d2:1225 on 001/003
Oct  3 00:27:14 kernel: usb 1-1: USB disconnect, device number 3
Oct  3 00:27:14 kernel: usb 1-1: new high-speed USB device number 4 using ehci-platform
Oct  3 00:27:14 kernel: usb 1-1: New USB device found, idVendor=19d2, idProduct=1403
Oct  3 00:27:14 kernel: usb 1-1: Product: ZTE Wireless Ethernet Adapter
Oct  3 00:27:14 kernel: usb 1-1: Manufacturer: ZTE,Incorporated
Oct  3 00:27:14 kernel: usb 1-1: SerialNumber: MF8310ZTED000000CP261718HNL0ZVY1TGG47X8_8_6D74&&&&&&&&&&&&&&&&&0
Oct  3 00:27:14 kernel: rndis_host 1-1:1.0: weth0: register 'rndis_host' at usb-ehci-platform-1, RNDIS device, 36:4b:50:b7:ef:da
Oct  3 00:27:14 kernel: scsi1 : usb-storage 1-1:1.2
Oct  3 00:27:16 kernel: usb 1-1: USB disconnect, device number 4
Oct  3 00:27:16 kernel: rndis_host 1-1:1.0: weth0: unregister 'rndis_host' usb-ehci-platform-1, RNDIS device
Oct  3 00:27:16 kernel: usb 1-1: new high-speed USB device number 5 using ehci-platform
Oct  3 00:27:16 kernel: usb 1-1: New USB device found, idVendor=05c6, idProduct=9024
Oct  3 00:27:16 kernel: usb 1-1: Product: ZTE Wireless Ethernet Adapter
Oct  3 00:27:16 kernel: usb 1-1: Manufacturer: ZTE,Incorporated
Oct  3 00:27:16 kernel: usb 1-1: SerialNumber: MF8310ZTED000000CP261718HNL0ZVY1TGG47X8_8_6D74&&&&&&&&&&&&&&&&&0
Oct  3 00:27:16 kernel: rndis_host 1-1:1.0: weth0: register 'rndis_host' at usb-ehci-platform-1, RNDIS device, 36:4b:50:b7:ef:da
Oct  3 00:27:22 USB hotplug: try start USB Modem as WAN connection...
Oct  3 00:27:22 MI-MINI: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Oct  3 00:27:22 MI-MINI: Hardware NAT/Routing: IPv4 UDP flow offload - ON
Oct  3 00:27:22 MI-MINI: Hardware NAT/Routing: IPv6 routes offload - OFF
Oct  3 00:27:22 dnsmasq[443]: read /etc/hosts - 3 addresses
Oct  3 00:27:22 dnsmasq[443]: read /etc/storage/dnsmasq/hosts - 0 addresses
Oct  3 00:27:22 dnsmasq-dhcp[443]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Oct  3 00:27:22 dnsmasq[443]: using nameserver 8.8.8.8#53
Oct  3 00:27:22 DHCP WAN Client: starting on weth0 ...
Oct  3 00:27:22 DHCP WAN Client: bound (weth0), IP: 192.168.8.153, GW: 192.168.8.1, lease time: 86400
Oct  3 00:27:22 MI-MINI: WAN up (weth0)
Oct  3 00:27:22 dnsmasq[443]: read /etc/hosts - 3 addresses
Oct  3 00:27:22 dnsmasq[443]: read /etc/storage/dnsmasq/hosts - 0 addresses
Oct  3 00:27:22 dnsmasq-dhcp[443]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Oct  3 00:27:22 dnsmasq[443]: using nameserver 192.168.8.1#53
Oct  3 00:27:22 miniupnpd[849]: version 2.0 starting UPnP-IGD ext if weth0 BOOTID=1475447242
Oct  3 00:27:22 miniupnpd[849]: HTTP listening on port 62188
Oct  3 00:27:23 dnsmasq[443]: nameserver 192.168.8.1 refused to do a recursive query
Oct  3 00:35:31 kernel: usb 1-1: USB disconnect, device number 5
Oct  3 00:35:31 kernel: rndis_host 1-1:1.0: weth0: unregister 'rndis_host' usb-ehci-platform-1, RNDIS device
Oct  3 00:35:36 DHCP WAN Client: deconfig (weth0): lease is lost
Oct  3 00:35:36 MI-MINI: WAN down (weth0)
Oct  3 00:35:36 dnsmasq[443]: read /etc/hosts - 3 addresses
Oct  3 00:35:36 dnsmasq[443]: read /etc/storage/dnsmasq/hosts - 0 addresses
Oct  3 00:35:36 dnsmasq-dhcp[443]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Oct  3 00:35:36 dnsmasq[443]: using nameserver 8.8.8.8#53
Oct  3 00:35:36 MI-MINI: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Oct  3 00:35:36 MI-MINI: Hardware NAT/Routing: IPv4 UDP flow offload - ON
Oct  3 00:35:36 MI-MINI: Hardware NAT/Routing: IPv6 routes offload - OFF
Oct  3 00:35:36 miniupnpd[849]: shutting down MiniUPnPd
Oct  3 00:35:36 DHCP WAN Client: starting on eth2.2 ...
Oct  3 00:40:10 kernel: usb 1-1: new high-speed USB device number 6 using ehci-platform
Oct  3 00:40:10 kernel: usb 1-1: New USB device found, idVendor=05c6, idProduct=9024
Oct  3 00:40:10 kernel: usb 1-1: Product: ZTE Wireless Ethernet Adapter
Oct  3 00:40:10 kernel: usb 1-1: Manufacturer: ZTE,Incorporated
Oct  3 00:40:10 kernel: usb 1-1: SerialNumber: MF8310ZTED000000CP261718HNL0ZVY1TGG47X8_8_6D74&&&&&&&&&&&&&&&&&0
Oct  3 00:40:11 kernel: rndis_host 1-1:1.0: weth0: register 'rndis_host' at usb-ehci-platform-1, RNDIS device, 36:4b:50:b7:ef:da
Oct  3 00:40:16 USB hotplug: try start USB Modem as WAN connection...
Oct  3 00:40:16 MI-MINI: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Oct  3 00:40:16 MI-MINI: Hardware NAT/Routing: IPv4 UDP flow offload - ON
Oct  3 00:40:16 MI-MINI: Hardware NAT/Routing: IPv6 routes offload - OFF
Oct  3 00:40:16 dnsmasq[443]: read /etc/hosts - 3 addresses
Oct  3 00:40:16 dnsmasq[443]: read /etc/storage/dnsmasq/hosts - 0 addresses
Oct  3 00:40:16 dnsmasq-dhcp[443]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Oct  3 00:40:16 dnsmasq[443]: using nameserver 8.8.8.8#53
Oct  3 00:40:16 DHCP WAN Client: starting on weth0 ...
Oct  3 00:40:19 kernel: usb 1-1: USB disconnect, device number 6
Oct  3 00:40:19 kernel: rndis_host 1-1:1.0: weth0: unregister 'rndis_host' usb-ehci-platform-1, RNDIS device
Oct  3 00:40:24 MI-MINI: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Oct  3 00:40:24 MI-MINI: Hardware NAT/Routing: IPv4 UDP flow offload - ON
Oct  3 00:40:24 MI-MINI: Hardware NAT/Routing: IPv6 routes offload - OFF
Oct  3 00:40:24 DHCP WAN Client: starting on eth2.2 ...
Oct  3 00:40:33 kernel: usb 1-1: new high-speed USB device number 7 using ehci-platform
Oct  3 00:40:33 kernel: usb 1-1: New USB device found, idVendor=19d2, idProduct=1225
Oct  3 00:40:33 kernel: usb 1-1: Product: ZTE Wireless Ethernet Adapter
Oct  3 00:40:33 kernel: usb 1-1: Manufacturer: ZTE,Incorporated
Oct  3 00:40:33 kernel: usb 1-1: SerialNumber: MF8310ZTED000000CP261718HNL0ZVY1TGG47X8_8_6D74&&&&&&&&&&&&&&&&&0
Oct  3 00:40:33 kernel: usb-storage 1-1:1.0: Quirks match for vid 19d2 pid 1225: 1
Oct  3 00:40:33 kernel: scsi2 : usb-storage 1-1:1.0
Oct  3 00:40:36 kernel: scsi 2:0:0:0: CD-ROM            CWID     USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
Oct  3 00:40:36 kernel: scsi 2:0:0:0: Attached scsi generic sg0 type 5
Oct  3 00:40:37 usb_modeswitch: switch device 19d2:1225 on 001/007
Oct  3 00:40:41 kernel: usb 1-1: USB disconnect, device number 7
Oct  3 00:40:42 kernel: usb 1-1: new high-speed USB device number 8 using ehci-platform
Oct  3 00:40:42 kernel: usb 1-1: New USB device found, idVendor=19d2, idProduct=1403
Oct  3 00:40:42 kernel: usb 1-1: Product: ZTE Wireless Ethernet Adapter
Oct  3 00:40:42 kernel: usb 1-1: Manufacturer: ZTE,Incorporated
Oct  3 00:40:42 kernel: usb 1-1: SerialNumber: MF8310ZTED000000CP261718HNL0ZVY1TGG47X8_8_6D74&&&&&&&&&&&&&&&&&0
Oct  3 00:40:42 kernel: rndis_host 1-1:1.0: weth0: register 'rndis_host' at usb-ehci-platform-1, RNDIS device, 36:4b:50:b7:ef:da
Oct  3 00:40:42 kernel: scsi3 : usb-storage 1-1:1.2
Oct  3 00:40:44 kernel: usb 1-1: USB disconnect, device number 8
Oct  3 00:40:44 kernel: rndis_host 1-1:1.0: weth0: unregister 'rndis_host' usb-ehci-platform-1, RNDIS device
Oct  3 00:40:44 kernel: usb 1-1: new high-speed USB device number 9 using ehci-platform
Oct  3 00:40:44 kernel: usb 1-1: New USB device found, idVendor=05c6, idProduct=9024
Oct  3 00:40:44 kernel: usb 1-1: Product: ZTE Wireless Ethernet Adapter
Oct  3 00:40:44 kernel: usb 1-1: Manufacturer: ZTE,Incorporated
Oct  3 00:40:44 kernel: usb 1-1: SerialNumber: MF8310ZTED000000CP261718HNL0ZVY1TGG47X8_8_6D74&&&&&&&&&&&&&&&&&0
Oct  3 00:40:44 kernel: rndis_host 1-1:1.0: weth0: register 'rndis_host' at usb-ehci-platform-1, RNDIS device, 36:4b:50:b7:ef:da
Oct  3 00:40:49 USB hotplug: try start USB Modem as WAN connection...
Oct  3 00:40:50 MI-MINI: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Oct  3 00:40:50 MI-MINI: Hardware NAT/Routing: IPv4 UDP flow offload - ON
Oct  3 00:40:50 MI-MINI: Hardware NAT/Routing: IPv6 routes offload - OFF
Oct  3 00:40:50 dnsmasq[443]: read /etc/hosts - 3 addresses
Oct  3 00:40:50 dnsmasq[443]: read /etc/storage/dnsmasq/hosts - 0 addresses
Oct  3 00:40:50 dnsmasq-dhcp[443]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Oct  3 00:40:50 dnsmasq[443]: using nameserver 8.8.8.8#53
Oct  3 00:40:50 DHCP WAN Client: starting on weth0 ...
Oct  3 00:40:50 DHCP WAN Client: bound (weth0), IP: 192.168.8.153, GW: 192.168.8.1, lease time: 86400
Oct  3 00:40:50 MI-MINI: WAN up (weth0)
Oct  3 00:40:50 dnsmasq[443]: read /etc/hosts - 3 addresses
Oct  3 00:40:50 dnsmasq[443]: read /etc/storage/dnsmasq/hosts - 0 addresses
Oct  3 00:40:50 dnsmasq-dhcp[443]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Oct  3 00:40:50 dnsmasq[443]: using nameserver 192.168.8.1#53
Oct  3 00:40:50 miniupnpd[1252]: version 2.0 starting UPnP-IGD ext if weth0 BOOTID=1475448050
Oct  3 00:40:50 miniupnpd[1252]: HTTP listening on port 57553
Oct  3 01:34:45 kernel: usb 1-1: USB disconnect, device number 9
Oct  3 01:34:45 kernel: rndis_host 1-1:1.0: weth0: unregister 'rndis_host' usb-ehci-platform-1, RNDIS device
Oct  3 01:34:50 DHCP WAN Client: deconfig (weth0): lease is lost
Oct  3 01:34:50 MI-MINI: WAN down (weth0)
Oct  3 01:34:50 dnsmasq[443]: read /etc/hosts - 3 addresses
Oct  3 01:34:50 dnsmasq[443]: read /etc/storage/dnsmasq/hosts - 0 addresses
Oct  3 01:34:50 dnsmasq-dhcp[443]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Oct  3 01:34:50 dnsmasq[443]: using nameserver 8.8.8.8#53
Oct  3 01:34:51 MI-MINI: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Oct  3 01:34:51 MI-MINI: Hardware NAT/Routing: IPv4 UDP flow offload - ON
Oct  3 01:34:51 MI-MINI: Hardware NAT/Routing: IPv6 routes offload - OFF
Oct  3 01:34:51 miniupnpd[1252]: shutting down MiniUPnPd
Oct  3 01:34:51 DHCP WAN Client: starting on eth2.2 ...
Oct  3 01:41:22 kernel: usb 1-1: new high-speed USB device number 10 using ehci-platform
Oct  3 01:41:22 kernel: usb 1-1: New USB device found, idVendor=05c6, idProduct=9024
Oct  3 01:41:22 kernel: usb 1-1: Product: ZTE Wireless Ethernet Adapter
Oct  3 01:41:22 kernel: usb 1-1: Manufacturer: ZTE,Incorporated
Oct  3 01:41:22 kernel: usb 1-1: SerialNumber: MF8310ZTED000000CP261718HNL0ZVY1TGG47X8_8_6D74&&&&&&&&&&&&&&&&&0
Oct  3 01:41:22 kernel: rndis_host 1-1:1.0: weth0: register 'rndis_host' at usb-ehci-platform-1, RNDIS device, 36:4b:50:b7:ef:da
Oct  3 01:41:27 USB hotplug: try start USB Modem as WAN connection...
Oct  3 01:41:28 kernel: usb 1-1: USB disconnect, device number 10
Oct  3 01:41:28 kernel: rndis_host 1-1:1.0: weth0: unregister 'rndis_host' usb-ehci-platform-1, RNDIS device
Oct  3 01:41:28 MI-MINI: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Oct  3 01:41:28 MI-MINI: Hardware NAT/Routing: IPv4 UDP flow offload - ON
Oct  3 01:41:28 MI-MINI: Hardware NAT/Routing: IPv6 routes offload - OFF
Oct  3 01:41:28 DHCP WAN Client: starting on eth2.2 ...
Oct  3 01:41:41 kernel: usb 1-1: new high-speed USB device number 11 using ehci-platform
Oct  3 01:41:41 kernel: usb 1-1: New USB device found, idVendor=19d2, idProduct=1225
Oct  3 01:41:41 kernel: usb 1-1: Product: ZTE Wireless Ethernet Adapter
Oct  3 01:41:41 kernel: usb 1-1: Manufacturer: ZTE,Incorporated
Oct  3 01:41:41 kernel: usb 1-1: SerialNumber: MF8310ZTED000000CP261718HNL0ZVY1TGG47X8_8_6D74&&&&&&&&&&&&&&&&&0
Oct  3 01:41:41 kernel: usb-storage 1-1:1.0: Quirks match for vid 19d2 pid 1225: 1
Oct  3 01:41:41 kernel: scsi4 : usb-storage 1-1:1.0
Oct  3 01:41:44 kernel: scsi 4:0:0:0: CD-ROM            CWID     USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
Oct  3 01:41:44 kernel: scsi 4:0:0:0: Attached scsi generic sg0 type 5
Oct  3 01:41:44 usb_modeswitch: switch device 19d2:1225 on 001/011
Oct  3 01:41:49 kernel: usb 1-1: USB disconnect, device number 11
Oct  3 01:41:49 kernel: usb 1-1: new high-speed USB device number 12 using ehci-platform
Oct  3 01:41:49 kernel: usb 1-1: New USB device found, idVendor=19d2, idProduct=1403
Oct  3 01:41:49 kernel: usb 1-1: Product: ZTE Wireless Ethernet Adapter
Oct  3 01:41:49 kernel: usb 1-1: Manufacturer: ZTE,Incorporated
Oct  3 01:41:49 kernel: usb 1-1: SerialNumber: MF8310ZTED000000CP261718HNL0ZVY1TGG47X8_8_6D74&&&&&&&&&&&&&&&&&0
Oct  3 01:41:50 kernel: rndis_host 1-1:1.0: weth0: register 'rndis_host' at usb-ehci-platform-1, RNDIS device, 36:4b:50:b7:ef:da
Oct  3 01:41:50 kernel: scsi5 : usb-storage 1-1:1.2
Oct  3 01:41:51 kernel: usb 1-1: USB disconnect, device number 12
Oct  3 01:41:51 kernel: rndis_host 1-1:1.0: weth0: unregister 'rndis_host' usb-ehci-platform-1, RNDIS device
Oct  3 01:41:51 kernel: usb 1-1: new high-speed USB device number 13 using ehci-platform
Oct  3 01:41:52 kernel: usb 1-1: New USB device found, idVendor=05c6, idProduct=9024
Oct  3 01:41:52 kernel: usb 1-1: Product: ZTE Wireless Ethernet Adapter
Oct  3 01:41:52 kernel: usb 1-1: Manufacturer: ZTE,Incorporated
Oct  3 01:41:52 kernel: usb 1-1: SerialNumber: MF8310ZTED000000CP261718HNL0ZVY1TGG47X8_8_6D74&&&&&&&&&&&&&&&&&0
Oct  3 01:41:52 kernel: rndis_host 1-1:1.0: weth0: register 'rndis_host' at usb-ehci-platform-1, RNDIS device, 36:4b:50:b7:ef:da
Oct  3 01:41:57 USB hotplug: try start USB Modem as WAN connection...
Oct  3 01:41:57 MI-MINI: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Oct  3 01:41:57 MI-MINI: Hardware NAT/Routing: IPv4 UDP flow offload - ON
Oct  3 01:41:57 MI-MINI: Hardware NAT/Routing: IPv6 routes offload - OFF
Oct  3 01:41:57 dnsmasq[443]: read /etc/hosts - 3 addresses
Oct  3 01:41:57 dnsmasq[443]: read /etc/storage/dnsmasq/hosts - 0 addresses
Oct  3 01:41:57 dnsmasq-dhcp[443]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Oct  3 01:41:57 dnsmasq[443]: using nameserver 8.8.8.8#53
Oct  3 01:41:57 DHCP WAN Client: starting on weth0 ...
Oct  3 01:41:58 DHCP WAN Client: bound (weth0), IP: 192.168.8.153, GW: 192.168.8.1, lease time: 86400
Oct  3 01:41:58 MI-MINI: WAN up (weth0)
Oct  3 01:41:58 dnsmasq[443]: read /etc/hosts - 3 addresses
Oct  3 01:41:58 dnsmasq[443]: read /etc/storage/dnsmasq/hosts - 0 addresses
Oct  3 01:41:58 dnsmasq-dhcp[443]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Oct  3 01:41:58 dnsmasq[443]: using nameserver 192.168.8.1#53
Oct  3 01:41:58 miniupnpd[1612]: version 2.0 starting UPnP-IGD ext if weth0 BOOTID=1475451718
Oct  3 01:41:58 miniupnpd[1612]: HTTP listening on port 8229
Oct  3 02:05:26 kernel: usb 1-1: USB disconnect, device number 13
Oct  3 02:05:26 kernel: rndis_host 1-1:1.0: weth0: unregister 'rndis_host' usb-ehci-platform-1, RNDIS device
Oct  3 02:05:31 DHCP WAN Client: deconfig (weth0): lease is lost
Oct  3 02:05:31 MI-MINI: WAN down (weth0)
Oct  3 02:05:31 dnsmasq[443]: read /etc/hosts - 3 addresses
Oct  3 02:05:31 dnsmasq[443]: read /etc/storage/dnsmasq/hosts - 0 addresses
Oct  3 02:05:31 dnsmasq-dhcp[443]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Oct  3 02:05:31 dnsmasq[443]: using nameserver 8.8.8.8#53
Oct  3 02:05:31 MI-MINI: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Oct  3 02:05:31 MI-MINI: Hardware NAT/Routing: IPv4 UDP flow offload - ON
Oct  3 02:05:31 MI-MINI: Hardware NAT/Routing: IPv6 routes offload - OFF
Oct  3 02:05:31 miniupnpd[1612]: shutting down MiniUPnPd
Oct  3 02:05:31 DHCP WAN Client: starting on eth2.2 ...
Oct  3 02:09:47 kernel: usb 1-1: new high-speed USB device number 14 using ehci-platform
Oct  3 02:09:47 kernel: usb 1-1: New USB device found, idVendor=05c6, idProduct=9024
Oct  3 02:09:47 kernel: usb 1-1: Product: ZTE Wireless Ethernet Adapter
Oct  3 02:09:47 kernel: usb 1-1: Manufacturer: ZTE,Incorporated
Oct  3 02:09:47 kernel: usb 1-1: SerialNumber: MF8310ZTED000000CP261718HNL0ZVY1TGG47X8_8_6D74&&&&&&&&&&&&&&&&&0
Oct  3 02:09:47 kernel: rndis_host 1-1:1.0: weth0: register 'rndis_host' at usb-ehci-platform-1, RNDIS device, 36:4b:50:b7:ef:da
Oct  3 02:09:52 USB hotplug: try start USB Modem as WAN connection...
Oct  3 02:09:53 MI-MINI: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Oct  3 02:09:53 MI-MINI: Hardware NAT/Routing: IPv4 UDP flow offload - ON
Oct  3 02:09:53 MI-MINI: Hardware NAT/Routing: IPv6 routes offload - OFF
Oct  3 02:09:53 dnsmasq[443]: read /etc/hosts - 3 addresses
Oct  3 02:09:53 dnsmasq[443]: read /etc/storage/dnsmasq/hosts - 0 addresses
Oct  3 02:09:53 dnsmasq-dhcp[443]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Oct  3 02:09:53 dnsmasq[443]: using nameserver 8.8.8.8#53
Oct  3 02:09:53 DHCP WAN Client: starting on weth0 ...
Oct  3 02:09:55 kernel: usb 1-1: USB disconnect, device number 14
Oct  3 02:09:55 kernel: rndis_host 1-1:1.0: weth0: unregister 'rndis_host' usb-ehci-platform-1, RNDIS device
Oct  3 02:10:01 MI-MINI: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Oct  3 02:10:01 MI-MINI: Hardware NAT/Routing: IPv4 UDP flow offload - ON
Oct  3 02:10:01 MI-MINI: Hardware NAT/Routing: IPv6 routes offload - OFF
Oct  3 02:10:01 DHCP WAN Client: starting on eth2.2 ...
Oct  3 02:10:14 kernel: usb 1-1: new high-speed USB device number 15 using ehci-platform
Oct  3 02:10:14 kernel: usb 1-1: New USB device found, idVendor=19d2, idProduct=1225
Oct  3 02:10:14 kernel: usb 1-1: Product: ZTE Wireless Ethernet Adapter
Oct  3 02:10:14 kernel: usb 1-1: Manufacturer: ZTE,Incorporated
Oct  3 02:10:14 kernel: usb 1-1: SerialNumber: MF8310ZTED000000CP261718HNL0ZVY1TGG47X8_8_6D74&&&&&&&&&&&&&&&&&0
Oct  3 02:10:14 kernel: usb-storage 1-1:1.0: Quirks match for vid 19d2 pid 1225: 1
Oct  3 02:10:14 kernel: scsi6 : usb-storage 1-1:1.0
Oct  3 02:10:17 kernel: scsi 6:0:0:0: CD-ROM            CWID     USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
Oct  3 02:10:17 kernel: scsi 6:0:0:0: Attached scsi generic sg0 type 5
Oct  3 02:10:17 usb_modeswitch: switch device 19d2:1225 on 001/015
Oct  3 02:10:22 kernel: usb 1-1: USB disconnect, device number 15
Oct  3 02:10:23 kernel: usb 1-1: new high-speed USB device number 16 using ehci-platform
Oct  3 02:10:23 kernel: usb 1-1: New USB device found, idVendor=19d2, idProduct=1403
Oct  3 02:10:23 kernel: usb 1-1: Product: ZTE Wireless Ethernet Adapter
Oct  3 02:10:23 kernel: usb 1-1: Manufacturer: ZTE,Incorporated
Oct  3 02:10:23 kernel: usb 1-1: SerialNumber: MF8310ZTED000000CP261718HNL0ZVY1TGG47X8_8_6D74&&&&&&&&&&&&&&&&&0
Oct  3 02:10:23 kernel: rndis_host 1-1:1.0: weth0: register 'rndis_host' at usb-ehci-platform-1, RNDIS device, 36:4b:50:b7:ef:da
Oct  3 02:10:23 kernel: scsi7 : usb-storage 1-1:1.2
Oct  3 02:10:24 kernel: usb 1-1: USB disconnect, device number 16
Oct  3 02:10:24 kernel: rndis_host 1-1:1.0: weth0: unregister 'rndis_host' usb-ehci-platform-1, RNDIS device
Oct  3 02:10:25 kernel: usb 1-1: new high-speed USB device number 17 using ehci-platform
Oct  3 02:10:25 kernel: usb 1-1: New USB device found, idVendor=05c6, idProduct=9024
Oct  3 02:10:25 kernel: usb 1-1: Product: ZTE Wireless Ethernet Adapter
Oct  3 02:10:25 kernel: usb 1-1: Manufacturer: ZTE,Incorporated
Oct  3 02:10:25 kernel: usb 1-1: SerialNumber: MF8310ZTED000000CP261718HNL0ZVY1TGG47X8_8_6D74&&&&&&&&&&&&&&&&&0
Oct  3 02:10:25 kernel: rndis_host 1-1:1.0: weth0: register 'rndis_host' at usb-ehci-platform-1, RNDIS device, 36:4b:50:b7:ef:da
Oct  3 02:10:30 USB hotplug: try start USB Modem as WAN connection...
Oct  3 02:10:31 MI-MINI: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Oct  3 02:10:31 MI-MINI: Hardware NAT/Routing: IPv4 UDP flow offload - ON
Oct  3 02:10:31 MI-MINI: Hardware NAT/Routing: IPv6 routes offload - OFF
Oct  3 02:10:31 dnsmasq[443]: read /etc/hosts - 3 addresses
Oct  3 02:10:31 dnsmasq[443]: read /etc/storage/dnsmasq/hosts - 0 addresses
Oct  3 02:10:31 dnsmasq-dhcp[443]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Oct  3 02:10:31 dnsmasq[443]: using nameserver 8.8.8.8#53
Oct  3 02:10:31 DHCP WAN Client: starting on weth0 ...
Oct  3 02:10:31 DHCP WAN Client: bound (weth0), IP: 192.168.8.153, GW: 192.168.8.1, lease time: 86400
Oct  3 02:10:31 MI-MINI: WAN up (weth0)
Oct  3 02:10:31 dnsmasq[443]: read /etc/hosts - 3 addresses
Oct  3 02:10:31 dnsmasq[443]: read /etc/storage/dnsmasq/hosts - 0 addresses
Oct  3 02:10:31 dnsmasq-dhcp[443]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Oct  3 02:10:31 dnsmasq[443]: using nameserver 192.168.8.1#53
Oct  3 02:10:31 miniupnpd[2018]: version 2.0 starting UPnP-IGD ext if weth0 BOOTID=1475453431
Oct  3 02:10:31 miniupnpd[2018]: HTTP listening on port 12944
Oct  3 02:10:31 dnsmasq[443]: nameserver 192.168.8.1 refused to do a recursive query

22 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,198

Odp: ZTE MF831

Ale kombinują starszliwie. Podłącz go znów pod lede, pokaż jeszcze

cat /sys/kernel/debus/usb/devices
uci show network

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

23 Odpowiedź przez dwoz

  • dwoz
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-11-25
  • Posty: 26

Odp: ZTE MF831

tak to wygląda:

root@LEDE:~# cat /sys/kernel/debug/usb/devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  1, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 4.04
S:  Manufacturer=Linux 4.4.50 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=101c0000.ehci
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=05c6 ProdID=9024 Rev=f1.55
S:  Manufacturer=ZTE,Incorporated
S:  Product=ZTE Wireless Ethernet Adapter
S:  SerialNumber=MF8310ZTED000000CP261718HNL0ZVY1TGG47X8_8_6D74&&&&&&&&&&&&&&&&&0
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

root@LEDE:~# uci show network
network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.globals=globals
network.globals.ula_prefix='fd80:4fa6:bf04::/48'
network.lan=interface
network.lan.type='bridge'
network.lan.proto='static'
network.lan.ipaddr='192.168.1.1'
network.lan.netmask='255.255.255.0'
network.lan.ip6assign='60'
network.lan._orig_ifname='eth0.1 wlan0'
network.lan._orig_bridge='true'
network.lan.ifname='eth0.1 eth0.2'
network.lan_dev=device
network.lan_dev.name='eth0.1'
network.lan_dev.macaddr='20:28:18:a2:6d:56'
network.@switch[0]=switch
network.@switch[0].name='switch0'
network.@switch[0].reset='1'
network.@switch[0].enable_vlan='1'
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device='switch0'
network.@switch_vlan[0].vlan='1'
network.@switch_vlan[0].ports='1 2 3 4 6t'
network.@switch_vlan[1]=switch_vlan
network.@switch_vlan[1].device='switch0'
network.@switch_vlan[1].vlan='2'
network.@switch_vlan[1].ports='0 6t'
network.wan=interface
network.wan.auto='1'
network.wan.proto='dhcp'
network.wan.ifname='usb0'

24 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,198

Odp: ZTE MF831

Wygląda nieźle. Nie wiem do czego się przyczepić. Przełącz go w normalny tryb i zobacz?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona