FAQ o OpenWrt | Sprzedam różne routery | Oddam

pacuro · 2017-02-17 23:51:06

pacuro
Użytkownik
Nieaktywny

Zarejestrowany: 2015-01-12
Posty: 105

Temat: Testuję pasmo 5GHz

Mieszkam w 12 piętrowym bloku i pasmo 2,4GHz zaczyna być nie do używania. Karty wifi w komputerach ściągają mi prawie 50 sieci 2,4GHz. W celu ucieczki z tego pasma złożyłem ruter x86 i jestem na etapie testowania pasma 5GHz, a obecnie jest to konkretnie karta TL-WDN4800. Im więcej czytam, tym mniej rozumiem. Jak mam rozumieć wynik iw reg get?

root@LEDE:~# iw reg get
global
country PL: DFS-ETSI
        (2402 - 2482 @ 40), (N/A, 20), (N/A)
        (5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW
        (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW
        (5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS
        (57000 - 66000 @ 2160), (N/A, 40), (N/A)

phy#0
country AU: DFS-ETSI
        (2402 - 2482 @ 40), (N/A, 20), (N/A)
        (5170 - 5250 @ 80), (N/A, 17), (N/A), AUTO-BW
        (5250 - 5330 @ 80), (N/A, 24), (0 ms), DFS, AUTO-BW
        (5490 - 5710 @ 160), (N/A, 24), (0 ms), DFS
        (5735 - 5835 @ 80), (N/A, 30), (N/A)

Global to ustawienie w lede. Czy phy#0 to ustawienie w epromie karty? Australia? Czy da się to zmienić?

Przy powyższym ustawieniu w Luci dla niskich kanałów 5GHz mogę ustawić maksymalnie 16dB i chyba jest to zgodne z:
TP-WDN4800 iw phy0 info

root@LEDE:~# iw phy0 info
Wiphy phy0
        max # scan SSIDs: 4
        max scan IEs length: 2257 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Device supports AP-side u-APSD.
        Device supports T-DLS.
        Available Antennas: TX 0x7 RX 0x7
        Configured Antennas: TX 0x7 RX 0x7
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * AP/VLAN
                 * WDS
                 * monitor
                 * mesh point
                 * P2P-client
                 * P2P-GO
                 * outside context of a BSS
        Band 1:
                Capabilities: 0x11ef
                        RX LDPC
                        HT20/HT40
                        SM Power Save disabled
                        RX HT20 SGI
                        RX HT40 SGI
                        TX STBC
                        RX STBC 1-stream
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 8 usec (0x06)
                HT TX/RX MCS rate indexes supported: 0-23
                Frequencies:
                        * 2412 MHz [1] (17.0 dBm)
                        * 2417 MHz [2] (16.0 dBm)
                        * 2422 MHz [3] (16.0 dBm)
                        * 2427 MHz [4] (16.0 dBm)
                        * 2432 MHz [5] (16.0 dBm)
                        * 2437 MHz [6] (16.0 dBm)
                        * 2442 MHz [7] (16.0 dBm)
                        * 2447 MHz [8] (16.0 dBm)
                        * 2452 MHz [9] (16.0 dBm)
                        * 2457 MHz [10] (16.0 dBm)
                        * 2462 MHz [11] (16.0 dBm)
                        * 2467 MHz [12] (16.0 dBm)
                        * 2472 MHz [13] (17.0 dBm)
                        * 2484 MHz [14] (disabled)
        Band 2:
                Capabilities: 0x11ef
                        RX LDPC
                        HT20/HT40
                        SM Power Save disabled
                        RX HT20 SGI
                        RX HT40 SGI
                        TX STBC
                        RX STBC 1-stream
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 8 usec (0x06)
                HT TX/RX MCS rate indexes supported: 0-23
                Frequencies:
                        * 5180 MHz [36] (16.0 dBm)
                        * 5200 MHz [40] (16.0 dBm)
                        * 5220 MHz [44] (16.0 dBm)
                        * 5240 MHz [48] (16.0 dBm)
                        * 5260 MHz [52] (13.0 dBm) (radar detection)
                        * 5280 MHz [56] (14.0 dBm) (radar detection)
                        * 5300 MHz [60] (14.0 dBm) (radar detection)
                        * 5320 MHz [64] (13.0 dBm) (radar detection)
                        * 5500 MHz [100] (19.0 dBm) (radar detection)
                        * 5520 MHz [104] (18.0 dBm) (radar detection)
                        * 5540 MHz [108] (18.0 dBm) (radar detection)
                        * 5560 MHz [112] (18.0 dBm) (radar detection)
                        * 5580 MHz [116] (18.0 dBm) (radar detection)
                        * 5600 MHz [120] (18.0 dBm) (radar detection)
                        * 5620 MHz [124] (18.0 dBm) (radar detection)
                        * 5640 MHz [128] (18.0 dBm) (radar detection)
                        * 5660 MHz [132] (18.0 dBm) (radar detection)
                        * 5680 MHz [136] (18.0 dBm) (radar detection)
                        * 5700 MHz [140] (19.0 dBm) (radar detection)
                        * 5745 MHz [149] (disabled)
                        * 5765 MHz [153] (disabled)
                        * 5785 MHz [157] (disabled)
                        * 5805 MHz [161] (disabled)
                        * 5825 MHz [165] (disabled)
        valid interface combinations:
                 * #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1, #{ IBSS } <= 1,
                   total <= 2048, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz }

                 * #{ WDS } <= 2048,
                   total <= 2048, #channels <= 1, STA/AP BI must match
        HT Capability overrides:
                 * MCS: ff ff ff ff ff ff ff ff ff ff
                 * maximum A-MSDU length
                 * supported channel width
                 * short GI for 40 MHz
                 * max A-MPDU length exponent
                 * min MPDU start spacing

Czy to realna moc radia? Da się coś zrobić by ustawić i realnie mieć 100mW ?

Intel DQ77KB + Celeron G1620 + WLE900VX (Luci Obsy 19.07) + UPC300
R6220 (Luci Obsy 19.07) + E3272S-153 ndis

Cezary · 2017-02-18 06:47:53

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,862

Odp: Testuję pasmo 5GHz

To jest realna moc radia i na 5GHz zwykle tyle karty mają. Po co chcesz zmieniać domyślny kraj jak możesz w konfigu PL ustawić?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

pacuro · 2017-02-18 09:23:53

pacuro
Użytkownik
Nieaktywny

Zarejestrowany: 2015-01-12
Posty: 105

Odp: Testuję pasmo 5GHz

Nie to, że chcę zmieniać domyślny kraj. Lecę na PL w konfigu i jest ok. Chodzi mi o to która wartość uchyla którą, jaki jest priorytet. Czy dostępne moce w gui są wypadkową tych trzech parametrów?

Intel DQ77KB + Celeron G1620 + WLE900VX (Luci Obsy 19.07) + UPC300
R6220 (Luci Obsy 19.07) + E3272S-153 ndis

Cezary · 2017-02-18 09:27:37

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,862

Odp: Testuję pasmo 5GHz

Nie średnia tylko najniższa z możliwych. Karta umie swoje, reg domain dla danego kraju pozwala Ci na tyle a tyle. Limitu karty nie przeskoczysz, to od regdomain możesz zmienić zmieniając kraj.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

pacuro · 2017-03-08 18:33:19

pacuro
Użytkownik
Nieaktywny

Zarejestrowany: 2015-01-12
Posty: 105

Odp: Testuję pasmo 5GHz

Ucieczka w 5GHz na razie się opłaciła, w otoczeniu mam 4 słabe sieci na innych kanałach, a u mnie leci ~180Mb/s.
Niestety potrzebuję interfejsu 2,4GHz bo drukarka jeszcze mi się ostała w tym paśmie. Tu zagadka dla mnie. Do karty TP-WDN4800, która rozgłasza w paśmie 5, dołożyłem AR5B125 na mini pci-e. Obie karty są widoczne, skonfigurowane i podniesione, jednak żadne z moich urządzeń nie widzi ssid sieci 2,4. Przepatrzyłem wszystko 3x, zmieniłem pigtaila i antenkę. Co jest nie tak? Brakuje jakiegoś wpisu?

root@RobP:~# uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.path='pci0000:00/0000:00:01.0/0000:01:00.0'
wireless.radio0.disabled='1'
wireless.radio0.hwmode='11a'
wireless.radio0.channel='44'
wireless.radio0.htmode='HT40'
wireless.radio0.txpower='16'
wireless.radio0.country='PL'
wireless.radio0.noscan='1'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.ssid='Rp50'
wireless.default_radio0.encryption='psk2+ccmp'
wireless.default_radio0.key='xxxxxxxx'
wireless.default_radio0.ieee80211w='0'
wireless.radio1=wifi-device
wireless.radio1.type='mac80211'
wireless.radio1.hwmode='11g'
wireless.radio1.path='pci0000:00/0000:00:1c.2/0000:03:00.0'
wireless.radio1.htmode='HT20'
wireless.radio1.txpower='16'
wireless.radio1.country='PL'
wireless.radio1.channel='11'
wireless.default_radio1=wifi-iface
wireless.default_radio1.device='radio1'
wireless.default_radio1.network='lan'
wireless.default_radio1.mode='ap'
wireless.default_radio1.ssid='Rp24'
wireless.default_radio1.encryption='psk2+ccmp'
wireless.default_radio1.key='xxxxxxxx'
wireless.default_radio1.ieee80211w='0'

Intel DQ77KB + Celeron G1620 + WLE900VX (Luci Obsy 19.07) + UPC300
R6220 (Luci Obsy 19.07) + E3272S-153 ndis

Cezary · 2017-03-08 19:32:50

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,862

Odp: Testuję pasmo 5GHz

Patrz w logi po wifi up

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

pacuro · 2017-03-09 09:26:14

pacuro
Użytkownik
Nieaktywny

Zarejestrowany: 2015-01-12
Posty: 105

Odp: Testuję pasmo 5GHz

Dziwna sprawa bo w logach nic nie wyszło. Wymieniłem AR5B125 na dongla usb z AR9271 i poszło od ręki. Obie sieci nadają obok siebie.
Muszę się przyjrzeć tej pierwszej karcie jeszcze raz bo może jednak coś nie łączy na antence.

Ustawiłem sobie w cronie gaszenie komputerka o północy, a w biosie budzenie o 6:00. Kolejna zagadka - rano żadna sieć nie rozgłaszała. Oba radia dodane, włączone, ap'ki ustawione. Rano nie miałem już czasu na dłubanie...

Intel DQ77KB + Celeron G1620 + WLE900VX (Luci Obsy 19.07) + UPC300
R6220 (Luci Obsy 19.07) + E3272S-153 ndis

Cezary · 2017-03-09 09:35:28

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,862

Odp: Testuję pasmo 5GHz

Sprawdzisz jak będziesz miał dostęp.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

pacuro · 2017-03-09 09:39:20

pacuro
Użytkownik
Nieaktywny

Zarejestrowany: 2015-01-12
Posty: 105

Odp: Testuję pasmo 5GHz

Tak, tak. Wrzucę logi.

Intel DQ77KB + Celeron G1620 + WLE900VX (Luci Obsy 19.07) + UPC300
R6220 (Luci Obsy 19.07) + E3272S-153 ndis

pacuro · 2017-03-09 17:31:02

pacuro
Użytkownik
Nieaktywny

Zarejestrowany: 2015-01-12
Posty: 105

Odp: Testuję pasmo 5GHz

Między 9 a 10 sekundą ładowania systemu wygląda na jakiś błąd moim zdaniem.

Thu Mar  9 16:57:20 2017 kern.debug kernel: [    0.172680] pci 0000:00:02.0: Video device with shadowed ROM
Thu Mar  9 16:57:20 2017 kern.debug kernel: [    0.216704] PCI: CLS mismatch (64 != 32), using 64 bytes
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.216748] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.216976] software IO TLB [mem 0x34bad000-0x38bad000] (64MB) mapped at [ffff880034bad000-ffff880038bacfff]
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.217353] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.217655] hw unit of domain pp0-core 2^-16 Joules
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.217839] hw unit of domain package 2^-16 Joules
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.218024] hw unit of domain pp1-gpu 2^-16 Joules
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.218396] futex hash table entries: 256 (order: 2, 16384 bytes)
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.220068] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.220827] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.221106] io scheduler noop registered
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.221275] io scheduler deadline registered (default)
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.221815] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.222034] hv_vmbus: registering driver hyperv_fb
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.222282] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.222586] ACPI: Power Button [PWRB]
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.222770] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.223050] ACPI: Power Button [PWRF]
Thu Mar  9 16:57:20 2017 kern.debug kernel: [    0.223439] Monitor-Mwait will be used to enter C-1 state
Thu Mar  9 16:57:20 2017 kern.debug kernel: [    0.223523] Monitor-Mwait will be used to enter C-2 state
Thu Mar  9 16:57:20 2017 kern.debug kernel: [    0.223527] ACPI: acpi_idle registered with cpuidle
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.223830] thermal LNXTHERM:00: registered as thermal_zone0
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.224044] ACPI: Thermal Zone [TZ00] (28 C)
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.224352] thermal LNXTHERM:01: registered as thermal_zone1
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.224564] ACPI: Thermal Zone [TZ01] (30 C)
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.224784] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.245732] 0000:00:16.3: ttyS4 at I/O 0xf080 (irq = 19, base_baud = 115200) is a 16550A
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.246148] Non-volatile memory driver v1.3
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.247368] loop: module loaded
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.247544] Guest personality initialized and is inactive
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.247757] VMCI host device registered (name=vmci, major=10, minor=63)
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.247992] Initialized host personality
Thu Mar  9 16:57:20 2017 kern.warn kernel: [    0.248204] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 

0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.248794] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Thu Mar  9 16:57:20 2017 kern.warn kernel: [    0.249138] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 

0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
Thu Mar  9 16:57:20 2017 kern.warn kernel: [    0.249728] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 

0x0000000000000500-0x000000000000054F (\_GPE.GPIO) (20150930/utaddress-254)
Thu Mar  9 16:57:20 2017 kern.warn kernel: [    0.250324] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 

0x0000000000000500-0x000000000000054F (\_GPE.GPS0) (20150930/utaddress-254)
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.250924] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Thu Mar  9 16:57:20 2017 kern.warn kernel: [    0.251266] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 

0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
Thu Mar  9 16:57:20 2017 kern.warn kernel: [    0.251853] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 

0x0000000000000500-0x000000000000054F (\_GPE.GPIO) (20150930/utaddress-254)
Thu Mar  9 16:57:20 2017 kern.warn kernel: [    0.252451] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 

0x0000000000000500-0x000000000000054F (\_GPE.GPS0) (20150930/utaddress-254)
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.253050] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Thu Mar  9 16:57:20 2017 kern.warn kernel: [    0.253390] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 

0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
Thu Mar  9 16:57:20 2017 kern.warn kernel: [    0.253980] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 

0x0000000000000500-0x000000000000054F (\_GPE.GPIO) (20150930/utaddress-254)
Thu Mar  9 16:57:20 2017 kern.warn kernel: [    0.254576] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 

0x0000000000000500-0x000000000000054F (\_GPE.GPS0) (20150930/utaddress-254)
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.255176] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Thu Mar  9 16:57:20 2017 kern.warn kernel: [    0.255517] lpc_ich: Resource conflict(s) found affecting gpio_ich
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.255762] VMware PVSCSI driver - version 1.0.5.0-k
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.255967] hv_vmbus: registering driver hv_storvsc
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.256579] scsi host0: pata_legacy
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.256766] ata1: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.416827] scsi host1: pata_legacy
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.417006] ata2: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.576672] VMware vmxnet3 virtual NIC driver - version 1.4.5.0-k-NAPI
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.576912] hv_vmbus: registering driver hv_netvsc
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.577101] Fusion MPT base driver 3.04.20
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.577273] Copyright (c) 1999-2008 LSI Corporation
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.577467] Fusion MPT SPI Host driver 3.04.20
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.577654] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.577887] ehci-pci: EHCI PCI platform driver
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.578174] ehci-pci 0000:00:1a.0: EHCI Host Controller
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.578377] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.578663] ehci-pci 0000:00:1a.0: debug port 2
Thu Mar  9 16:57:20 2017 kern.debug kernel: [    0.582734] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.582741] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e33000
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.596583] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.596899] hub 1-0:1.0: USB hub found
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.597076] hub 1-0:1.0: 3 ports detected
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.597393] ehci-pci 0000:00:1d.0: EHCI Host Controller
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.597594] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.597880] ehci-pci 0000:00:1d.0: debug port 2
Thu Mar  9 16:57:20 2017 kern.debug kernel: [    0.601960] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.601966] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e32000
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.616590] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.617501] hub 2-0:1.0: USB hub found
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.617674] hub 2-0:1.0: 3 ports detected
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.617915] ehci-platform: EHCI generic platform driver
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.618127] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.618354] ohci-pci: OHCI PCI platform driver
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.618543] ohci-platform: OHCI generic platform driver
Thu Mar  9 16:57:20 2017 kern.info kernel: [    0.618751] uhci_hcd: USB Universal Host Controller Interface driver
Thu Mar  9 16:33:49 2017 kern.info kernel: [    0.619705] xhci_hcd 0000:00:14.0: xHCI Host Controller
Thu Mar  9 16:33:49 2017 kern.info kernel: [    0.619906] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
Thu Mar  9 16:33:49 2017 kern.info kernel: [    0.621274] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
Thu Mar  9 16:33:49 2017 kern.debug kernel: [    0.621578] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
Thu Mar  9 16:33:49 2017 kern.info kernel: [    0.621748] hub 3-0:1.0: USB hub found
Thu Mar  9 16:33:49 2017 kern.info kernel: [    0.621928] hub 3-0:1.0: 4 ports detected
Thu Mar  9 16:33:49 2017 kern.info kernel: [    0.622321] xhci_hcd 0000:00:14.0: xHCI Host Controller
Thu Mar  9 16:33:49 2017 kern.info kernel: [    0.622525] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
Thu Mar  9 16:33:49 2017 kern.info kernel: [    0.622871] hub 4-0:1.0: USB hub found
Thu Mar  9 16:33:49 2017 kern.info kernel: [    0.623050] hub 4-0:1.0: 4 ports detected
Thu Mar  9 16:33:49 2017 kern.info kernel: [    0.623460] usbcore: registered new interface driver usb-storage
Thu Mar  9 16:33:49 2017 kern.info kernel: [    0.623701] i8042: PNP: No PS/2 controller found. Probing ports directly.
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.727666] i8042: No controller found
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.727834] hv_vmbus: registering driver hyperv_keyboard
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.728060] rtc_cmos 00:01: RTC can wake from S4
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.728341] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.728588] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.728885] sdhci: Secure Digital Host Controller Interface driver
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.729107] sdhci: Copyright(c) Pierre Ossman
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.729538] hidraw: raw HID events driver (C) Jiri Kosina
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.729753] hv_vmbus: registering driver hid_hyperv
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.729950] hv_utils: Registering HyperV Utility Driver
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.730149] hv_vmbus: registering driver hv_util
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.730334] hv_vmbus: registering driver hv_balloon
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.730642] NET: Registered protocol family 10
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.731090] tsc: Refined TSC clocksource calibration: 2693.880 MHz
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.731313] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d4a90bb86, max_idle_ns: 440795202126 ns
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.731800] NET: Registered protocol family 17
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.731992] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load 

br_netfilter if you need this.
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.732396] 8021q: 802.1Q VLAN Support v1.8
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.732588] NET: Registered protocol family 40
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.732890] registered taskstats version 1
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.733448] rtc_cmos 00:01: setting system clock to 2017-03-09 15:33:44 UTC (1489073624)
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.733987] Waiting for root device PARTUUID=ffaa5425-02...
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.947287] usb 2-1: new high-speed USB device number 2 using ehci-pci
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.947549] usb 1-1: new high-speed USB device number 2 using ehci-pci
Thu Mar  9 16:33:49 2017 kern.info kernel: [    1.947810] usb 3-1: new high-speed USB device number 2 using xhci_hcd
Thu Mar  9 16:33:49 2017 kern.info kernel: [    2.097753] hub 1-1:1.0: USB hub found
Thu Mar  9 16:33:49 2017 kern.info kernel: [    2.097949] hub 2-1:1.0: USB hub found
Thu Mar  9 16:33:49 2017 kern.info kernel: [    2.098145] hub 1-1:1.0: 6 ports detected
Thu Mar  9 16:33:49 2017 kern.info kernel: [    2.098330] hub 2-1:1.0: 8 ports detected
Thu Mar  9 16:33:49 2017 kern.info kernel: [    2.227301] usb 3-4: new high-speed USB device number 3 using xhci_hcd
Thu Mar  9 16:33:49 2017 kern.info kernel: [    2.367838] usb-storage 3-4:1.0: USB Mass Storage device detected
Thu Mar  9 16:33:49 2017 kern.info kernel: [    2.368144] scsi host2: usb-storage 3-4:1.0
Thu Mar  9 16:33:49 2017 kern.info kernel: [    2.727353] clocksource: Switched to clocksource tsc
Thu Mar  9 16:33:49 2017 kern.notice kernel: [    3.367706] scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer Fit       1.27 PQ: 0 ANSI: 6
Thu Mar  9 16:33:49 2017 kern.notice kernel: [    3.368946] sd 2:0:0:0: [sda] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
Thu Mar  9 16:33:49 2017 kern.notice kernel: [    3.370004] sd 2:0:0:0: [sda] Write Protect is off
Thu Mar  9 16:33:49 2017 kern.debug kernel: [    3.370213] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
Thu Mar  9 16:33:49 2017 kern.notice kernel: [    3.370446] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Thu Mar  9 16:33:49 2017 kern.info kernel: [    3.373057]  sda: sda1 sda2
Thu Mar  9 16:33:49 2017 kern.notice kernel: [    3.374138] sd 2:0:0:0: [sda] Attached SCSI removable disk
Thu Mar  9 16:33:49 2017 kern.info kernel: [    3.386700] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
Thu Mar  9 16:33:49 2017 kern.info kernel: [    3.386971] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
Thu Mar  9 16:33:49 2017 kern.info kernel: [    3.387416] Freeing unused kernel memory: 864K (ffffffff816d9000 - ffffffff817b1000)
Thu Mar  9 16:33:49 2017 user.info kernel: [    3.460140] init: Console is alive
Thu Mar  9 16:33:49 2017 kern.info kernel: [    3.711120] pps_core: LinuxPPS API ver. 1 registered
Thu Mar  9 16:33:49 2017 kern.info kernel: [    3.711331] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Thu Mar  9 16:33:49 2017 kern.info kernel: [    3.712487] PTP clock support registered
Thu Mar  9 16:33:49 2017 kern.info kernel: [    3.714817] Button Hotplug driver version 0.4.1
Thu Mar  9 16:33:49 2017 user.info kernel: [    3.721935] init: - preinit -
Thu Mar  9 16:33:49 2017 kern.notice kernel: [    3.760315] random: jshn: uninitialized urandom read (4 bytes read, 25 bits of entropy available)
Thu Mar  9 16:33:49 2017 kern.notice kernel: [    3.765174] random: jshn: uninitialized urandom read (4 bytes read, 25 bits of entropy available)
Thu Mar  9 16:33:49 2017 kern.notice kernel: [    3.766830] random: jshn: uninitialized urandom read (4 bytes read, 25 bits of entropy available)
Thu Mar  9 16:33:49 2017 kern.notice kernel: [    3.771498] random: jshn: uninitialized urandom read (4 bytes read, 25 bits of entropy available)
Thu Mar  9 16:33:49 2017 kern.notice kernel: [    3.773695] random: jshn: uninitialized urandom read (4 bytes read, 25 bits of entropy available)
Thu Mar  9 16:33:49 2017 kern.notice kernel: [    3.776034] random: jshn: uninitialized urandom read (4 bytes read, 25 bits of entropy available)
Thu Mar  9 16:33:49 2017 user.notice kernel: [    5.809015] mount_root: mounting /dev/root
Thu Mar  9 16:33:49 2017 kern.warn kernel: [    5.809306] EXT4-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended
Thu Mar  9 16:33:49 2017 kern.info kernel: [    5.811416] EXT4-fs (sda2): re-mounted. Opts: (null)
Thu Mar  9 16:33:49 2017 user.info kernel: [    5.811654] mount_root: loading kmods from internal overlay
Thu Mar  9 16:33:49 2017 user.info kernel: [    6.378292] block: attempting to load /etc/config/fstab
Thu Mar  9 16:33:49 2017 user.info kernel: [    6.379251] block: extroot: not configured
Thu Mar  9 16:33:49 2017 kern.info kernel: [    6.400383] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
Thu Mar  9 16:33:49 2017 user.warn kernel: [    6.403784] urandom-seed: Seeding with /etc/urandom.seed
Thu Mar  9 16:33:49 2017 user.info kernel: [    6.406999] procd: - early -
Thu Mar  9 16:33:49 2017 kern.notice kernel: [    6.436629] random: jshn: uninitialized urandom read (4 bytes read, 43 bits of entropy available)
Thu Mar  9 16:33:49 2017 kern.notice kernel: [    6.448194] random: jshn: uninitialized urandom read (4 bytes read, 43 bits of entropy available)
Thu Mar  9 16:33:49 2017 kern.notice kernel: [    6.458568] random: jshn: uninitialized urandom read (4 bytes read, 43 bits of entropy available)
Thu Mar  9 16:33:49 2017 kern.notice kernel: [    6.468857] random: jshn: uninitialized urandom read (4 bytes read, 43 bits of entropy available)
Thu Mar  9 16:33:49 2017 user.info kernel: [    6.922053] procd: - ubus -
Thu Mar  9 16:33:49 2017 user.info kernel: [    6.972932] procd: - init -
Thu Mar  9 16:33:49 2017 kern.info kernel: [    6.990881] tun: Universal TUN/TAP device driver, 1.6
Thu Mar  9 16:33:49 2017 kern.info kernel: [    6.991088] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Thu Mar  9 16:33:49 2017 kern.info kernel: [    6.993430] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
Thu Mar  9 16:33:49 2017 kern.info kernel: [    6.993680] e1000: Copyright (c) 1999-2006 Intel Corporation.
Thu Mar  9 16:33:49 2017 kern.info kernel: [    6.995216] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
Thu Mar  9 16:33:49 2017 kern.info kernel: [    6.995466] igb: Copyright (c) 2007-2014 Intel Corporation.
Thu Mar  9 16:33:49 2017 kern.info kernel: [    6.997260] i2c /dev entries driver
Thu Mar  9 16:33:49 2017 kern.info kernel: [    6.999470] u32 classifier
Thu Mar  9 16:33:49 2017 kern.info kernel: [    6.999618]     input device check on
Thu Mar  9 16:33:49 2017 kern.info kernel: [    6.999785]     Actions configured
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.000052] Mirror/redirect action on
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.001406] nf_conntrack version 0.5.0 (6775 buckets, 27100 max)
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.002925] fuse init (API version 7.23)
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.027643] usbcore: registered new interface driver cdc_acm
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.027861] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.028328] usbcore: registered new interface driver cdc_wdm
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.028735] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.029034] Backport generated by backports.git backports-20160324-13-g24da7d3c
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.029771] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.029993] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.030370] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.237713] e1000e 0000:00:19.0 eth0: registered PHC clock
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.237932] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1)
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.238236] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.238519] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.238846] e1000e 0000:03:00.0: Disabling ASPM  L1
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.239207] e1000e 0000:03:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.364020] e1000e 0000:03:00.0 eth1: registered PHC clock
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.364239] e1000e 0000:03:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.364540] e1000e 0000:03:00.0 eth1: Intel(R) PRO/1000 Network Connection
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.364869] e1000e 0000:03:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.369118] usbcore: registered new interface driver usblp
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.370012] usbcore: registered new interface driver usbserial
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.370243] usbcore: registered new interface driver usbserial_generic
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.370487] usbserial: USB Serial support registered for generic
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.373613] xt_time: kernel timezone is -0000
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.373975] usbcore: registered new interface driver cdc_ether
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.374482] usbcore: registered new interface driver cdc_ncm
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.378436] usbcore: registered new interface driver huawei_cdc_ncm
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.378898] ip6_tables: (C) 2000-2006 Netfilter Core Team
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.379308] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.398171] PPP generic driver version 2.4.2
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.398572] NET: Registered protocol family 24
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.398964] usbcore: registered new interface driver qmi_wwan
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.399394] usbcore: registered new interface driver rndis_host
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.399767] usbcore: registered new interface driver sierra
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.399991] usbserial: USB Serial support registered for Sierra USB modem
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.400458] usbcore: registered new interface driver sierra_net
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.407806] usbcore: registered new interface driver cdc_mbim
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.408319] usbcore: registered new interface driver option
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.408545] usbserial: USB Serial support registered for GSM modem (1-port)
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.409358] usbcore: registered new interface driver qcserial
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.409584] usbserial: USB Serial support registered for Qualcomm USB modem
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.410639] usb 3-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.410935] usbcore: registered new interface driver ath9k_htc
Thu Mar  9 16:33:49 2017 kern.debug kernel: [    7.491546] ath: EEPROM regdomain: 0x21
Thu Mar  9 16:33:49 2017 kern.debug kernel: [    7.491548] ath: EEPROM indicates we should expect a direct regpair map
Thu Mar  9 16:33:49 2017 kern.debug kernel: [    7.491549] ath: Country alpha2 being used: AU
Thu Mar  9 16:33:49 2017 kern.debug kernel: [    7.491550] ath: Regpair used: 0x21
Thu Mar  9 16:33:49 2017 kern.debug kernel: [    7.498173] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.498585] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffc90000540000, irq=16
Thu Mar  9 16:33:49 2017 user.notice : Added device handler type: 8021ad
Thu Mar  9 16:33:49 2017 user.notice : Added device handler type: 8021q
Thu Mar  9 16:33:49 2017 user.notice : Added device handler type: macvlan
Thu Mar  9 16:33:49 2017 user.notice : Added device handler type: bridge
Thu Mar  9 16:33:49 2017 user.notice : Added device handler type: Network device
Thu Mar  9 16:33:49 2017 user.notice : Added device handler type: tunnel
Thu Mar  9 16:33:49 2017 kern.info kernel: [    7.790806] usb 3-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
Thu Mar  9 16:33:49 2017 daemon.err block: /dev/sda2 is already mounted on /
Thu Mar  9 16:33:50 2017 kern.info kernel: [    8.042466] ath9k_htc 3-1:1.0: ath9k_htc: HTC initialized with 33 credits
Thu Mar  9 16:33:50 2017 daemon.notice netifd: Interface 'lan' is enabled
Thu Mar  9 16:33:50 2017 daemon.notice netifd: Interface 'lan' is setting up now
Thu Mar  9 16:33:50 2017 daemon.notice netifd: Interface 'lan' is now up
Thu Mar  9 16:33:50 2017 daemon.notice netifd: Interface 'loopback' is enabled
Thu Mar  9 16:33:50 2017 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Mar  9 16:33:50 2017 daemon.notice netifd: Interface 'loopback' is now up
Thu Mar  9 16:33:50 2017 daemon.err block: /dev/sda2 is already mounted on /
Thu Mar  9 16:33:50 2017 kern.info kernel: [    8.047951] device eth0 entered promiscuous mode
Thu Mar  9 16:33:50 2017 kern.info kernel: [    8.048893] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Thu Mar  9 16:33:50 2017 cron.info crond[1894]: crond (busybox 1.25.1) started, log level 8
Thu Mar  9 16:33:50 2017 daemon.notice netifd: Interface 'wan' is enabled
Thu Mar  9 16:33:50 2017 daemon.notice netifd: Network device 'lo' link is up
Thu Mar  9 16:33:50 2017 daemon.notice netifd: Interface 'loopback' has link connectivity 
Thu Mar  9 16:33:50 2017 kern.info kernel: [    8.128062] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Thu Mar  9 16:33:50 2017 kern.info kernel: [    8.128290] 8021q: adding VLAN 0 to HW filter on device eth1
Thu Mar  9 16:33:50 2017 daemon.notice netifd: radio1 (1914): Could not find PHY for device 'radio1'
Thu Mar  9 16:33:50 2017 authpriv.info dropbear[1942]: Not backgrounding
Thu Mar  9 16:33:50 2017 daemon.notice netifd: radio1 (1941): WARNING: Variable 'data' does not exist or is not an array/object
Thu Mar  9 16:33:50 2017 kern.debug kernel: [    8.237059] ath: EEPROM regdomain: 0x8268
Thu Mar  9 16:33:50 2017 kern.debug kernel: [    8.237247] ath: EEPROM indicates we should expect a country code
Thu Mar  9 16:33:50 2017 kern.debug kernel: [    8.237479] ath: doing EEPROM country->regdmn map search
Thu Mar  9 16:33:50 2017 kern.debug kernel: [    8.237725] ath: country maps to regdmn code: 0x37
Thu Mar  9 16:33:50 2017 kern.debug kernel: [    8.237919] ath: Country alpha2 being used: PL
Thu Mar  9 16:33:50 2017 kern.debug kernel: [    8.238104] ath: Regpair used: 0x37
Thu Mar  9 16:33:50 2017 kern.debug kernel: [    8.238267] ath: regdomain 0x8268 dynamically updated by user
Thu Mar  9 16:33:50 2017 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Mar  9 16:33:50 2017 kern.info kernel: [    8.333807] ath9k_htc 3-1:1.0: ath9k_htc: FW Version: 1.4
Thu Mar  9 16:33:50 2017 kern.info kernel: [    8.334012] ath9k_htc 3-1:1.0: FW RMW support: On
Thu Mar  9 16:33:50 2017 kern.debug kernel: [    8.334195] ath: EEPROM regdomain: 0x809c
Thu Mar  9 16:33:50 2017 kern.debug kernel: [    8.334361] ath: EEPROM indicates we should expect a country code
Thu Mar  9 16:33:50 2017 kern.debug kernel: [    8.334578] ath: doing EEPROM country->regdmn map search
Thu Mar  9 16:33:50 2017 kern.debug kernel: [    8.334775] ath: country maps to regdmn code: 0x52
Thu Mar  9 16:33:50 2017 kern.debug kernel: [    8.334960] ath: Country alpha2 being used: CN
Thu Mar  9 16:33:50 2017 kern.debug kernel: [    8.335143] ath: Regpair used: 0x52
Thu Mar  9 16:33:50 2017 kern.debug kernel: [    8.340215] ath: EEPROM regdomain: 0x8268
Thu Mar  9 16:33:50 2017 kern.debug kernel: [    8.340387] ath: EEPROM indicates we should expect a country code
Thu Mar  9 16:33:50 2017 kern.debug kernel: [    8.340604] ath: doing EEPROM country->regdmn map search
Thu Mar  9 16:33:50 2017 kern.debug kernel: [    8.340800] ath: country maps to regdmn code: 0x37
Thu Mar  9 16:33:50 2017 kern.debug kernel: [    8.340983] ath: Country alpha2 being used: PL
Thu Mar  9 16:33:50 2017 kern.debug kernel: [    8.341160] ath: Regpair used: 0x37
Thu Mar  9 16:33:50 2017 kern.debug kernel: [    8.341314] ath: regdomain 0x8268 dynamically updated by user
Thu Mar  9 16:33:50 2017 kern.info kernel: [    8.341754] ieee80211 phy1: Atheros AR9271 Rev:1
Thu Mar  9 16:33:50 2017 daemon.info procd: - init complete -
Thu Mar  9 16:33:51 2017 daemon.notice netifd: radio0 (1913): command failed: Too many open files in system (-23)
Thu Mar  9 16:33:51 2017 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Thu Mar  9 16:33:51 2017 kern.info kernel: [    9.477221] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Thu Mar  9 16:33:51 2017 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Thu Mar  9 16:33:51 2017 daemon.err hostapd: Hardware does not support configured mode
Thu Mar  9 16:33:51 2017 daemon.warn hostapd: wlan0: IEEE 802.11 Hardware does not support configured mode (2) (hw_mode in hostapd.conf)
Thu Mar  9 16:33:51 2017 daemon.err hostapd: Could not select hw_mode and channel. (-2)
Thu Mar  9 16:33:51 2017 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->DISABLED
Thu Mar  9 16:33:51 2017 daemon.notice hostapd: wlan0: AP-DISABLED 
Thu Mar  9 16:33:51 2017 daemon.err hostapd: wlan0: Unable to setup interface.
Thu Mar  9 16:33:51 2017 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED
Thu Mar  9 16:33:51 2017 daemon.notice hostapd: wlan0: AP-DISABLED 
Thu Mar  9 16:33:51 2017 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING 
Thu Mar  9 16:33:51 2017 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Thu Mar  9 16:33:51 2017 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Thu Mar  9 16:33:51 2017 kern.info kernel: [    9.478076] device wlan0 entered promiscuous mode
Thu Mar  9 16:33:51 2017 kern.info kernel: [    9.478854] device wlan0 left promiscuous mode
Thu Mar  9 16:33:51 2017 kern.info kernel: [    9.479061] br-lan: port 2(wlan0) entered disabled state
Thu Mar  9 16:33:51 2017 kern.notice kernel: [    9.486770] random: nonblocking pool is initialized
Thu Mar  9 16:33:51 2017 daemon.notice netifd: radio0 (1913): cat: can't open '/var/run/wifi-phy0.pid': No such file or directory
Thu Mar  9 16:33:51 2017 daemon.notice netifd: radio0 (1913): Command failed: Invalid argument
Thu Mar  9 16:33:51 2017 daemon.notice netifd: radio0 (1913): Device setup failed: HOSTAPD_START_FAILED
Thu Mar  9 16:33:52 2017 daemon.info dnsmasq[2424]: started, version 2.76 cachesize 150
Thu Mar  9 16:33:52 2017 daemon.info dnsmasq[2424]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-

auth no-DNSSEC no-ID loop-detect inotify
Thu Mar  9 16:33:52 2017 daemon.info dnsmasq[2424]: DNS service limited to local subnets
Thu Mar  9 16:33:52 2017 daemon.info dnsmasq[2424]: using local addresses only for domain lan
Thu Mar  9 16:33:52 2017 daemon.warn dnsmasq[2424]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Mar  9 16:33:52 2017 daemon.info dnsmasq[2424]: read /etc/hosts - 4 addresses
Thu Mar  9 16:33:52 2017 daemon.info dnsmasq[2424]: read /tmp/hosts/dhcp.cfg02411c - 1 addresses
Thu Mar  9 16:33:52 2017 daemon.info dnsmasq[2424]: 1 127.0.0.1/53844 query[A] 0.lede.pool.ntp.org from 127.0.0.1
Thu Mar  9 16:33:52 2017 daemon.info dnsmasq[2424]: 2 127.0.0.1/53844 query[AAAA] 0.lede.pool.ntp.org from 127.0.0.1
Thu Mar  9 16:33:53 2017 daemon.notice netifd: Network device 'eth1' link is up
Thu Mar  9 16:33:53 2017 daemon.notice netifd: Interface 'wan' has link connectivity 
Thu Mar  9 16:33:53 2017 daemon.notice netifd: Interface 'wan' is setting up now
Thu Mar  9 16:33:53 2017 daemon.notice netifd: wan (2594): udhcpc: started, v1.25.1
Thu Mar  9 16:33:53 2017 kern.info kernel: [   10.998823] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Thu Mar  9 16:33:53 2017 kern.info kernel: [   10.999472] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Thu Mar  9 16:33:53 2017 daemon.notice netifd: wan (2594): udhcpc: sending discover
Thu Mar  9 16:33:56 2017 daemon.notice netifd: wan (2594): udhcpc: sending discover
Thu Mar  9 16:33:56 2017 daemon.notice netifd: wan (2594): udhcpc: sending select for 192.168.0.10
Thu Mar  9 16:33:57 2017 daemon.notice netifd: wan (2594): udhcpc: lease of 192.168.0.10 obtained, lease time 86400
Thu Mar  9 16:33:57 2017 daemon.notice netifd: Interface 'wan' is now up
Thu Mar  9 16:33:57 2017 daemon.info dnsmasq[2424]: reading /tmp/resolv.conf.auto
Thu Mar  9 16:33:57 2017 daemon.info dnsmasq[2424]: using local addresses only for domain lan
Thu Mar  9 16:33:57 2017 daemon.info dnsmasq[2424]: using nameserver 62.179.1.61#53
Thu Mar  9 16:33:57 2017 daemon.info dnsmasq[2424]: using nameserver 62.179.1.63#53
Thu Mar  9 16:33:57 2017 user.notice firewall: Reloading firewall due to ifup of wan (eth1)
Thu Mar  9 16:33:57 2017 user.notice ddns-scripts[2702]: myddns_ipv4: PID '2702' started at 2017-03-09 16:33
Thu Mar  9 16:33:57 2017 user.warn ddns-scripts[2702]: myddns_ipv4: Service section disabled! - TERMINATE
Thu Mar  9 16:33:57 2017 user.warn ddns-scripts[2702]: myddns_ipv4: PID '2702' exit WITH ERROR '1' at 2017-03-09 16:33
Thu Mar  9 16:33:59 2017 daemon.info dnsmasq[2424]: exiting on receipt of SIGTERM
Thu Mar  9 16:33:59 2017 daemon.info dnsmasq[2839]: started, version 2.76 cachesize 150
Thu Mar  9 16:33:59 2017 daemon.info dnsmasq[2839]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-

auth no-DNSSEC no-ID loop-detect inotify
Thu Mar  9 16:33:59 2017 daemon.info dnsmasq[2839]: DNS service limited to local subnets
Thu Mar  9 16:33:59 2017 daemon.info dnsmasq[2839]: using local addresses only for domain lan
Thu Mar  9 16:33:59 2017 daemon.info dnsmasq[2839]: reading /tmp/resolv.conf.auto
Thu Mar  9 16:33:59 2017 daemon.info dnsmasq[2839]: using local addresses only for domain lan
Thu Mar  9 16:33:59 2017 daemon.info dnsmasq[2839]: using nameserver 62.179.1.61#53
Thu Mar  9 16:33:59 2017 daemon.info dnsmasq[2839]: using nameserver 62.179.1.63#53
Thu Mar  9 16:33:59 2017 daemon.info dnsmasq[2839]: read /etc/hosts - 4 addresses
Thu Mar  9 16:33:59 2017 daemon.info dnsmasq[2839]: read /tmp/hosts/dhcp.cfg02411c - 1 addresses
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 1 127.0.0.1/53179 query[A] 0.lede.pool.ntp.org from 127.0.0.1
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 1 127.0.0.1/53179 forwarded 0.lede.pool.ntp.org to 62.179.1.61
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 1 127.0.0.1/53179 forwarded 0.lede.pool.ntp.org to 62.179.1.63
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 2 127.0.0.1/53179 query[AAAA] 0.lede.pool.ntp.org from 127.0.0.1
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 2 127.0.0.1/53179 forwarded 0.lede.pool.ntp.org to 62.179.1.61
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 2 127.0.0.1/53179 forwarded 0.lede.pool.ntp.org to 62.179.1.63
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 1 127.0.0.1/53179 reply 0.lede.pool.ntp.org is 193.70.94.182
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 1 127.0.0.1/53179 reply 0.lede.pool.ntp.org is 193.25.222.240
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 1 127.0.0.1/53179 reply 0.lede.pool.ntp.org is 91.212.242.21
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 1 127.0.0.1/53179 reply 0.lede.pool.ntp.org is 46.175.224.7
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 2 127.0.0.1/53179 reply 0.lede.pool.ntp.org is NODATA-IPv6
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 3 127.0.0.1/46812 query[A] 1.lede.pool.ntp.org from 127.0.0.1
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 3 127.0.0.1/46812 forwarded 1.lede.pool.ntp.org to 62.179.1.61
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 4 127.0.0.1/46812 query[AAAA] 1.lede.pool.ntp.org from 127.0.0.1
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 4 127.0.0.1/46812 forwarded 1.lede.pool.ntp.org to 62.179.1.61
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 3 127.0.0.1/46812 reply 1.lede.pool.ntp.org is 193.219.28.147
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 3 127.0.0.1/46812 reply 1.lede.pool.ntp.org is 62.148.67.62
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 3 127.0.0.1/46812 reply 1.lede.pool.ntp.org is 194.29.130.252
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 3 127.0.0.1/46812 reply 1.lede.pool.ntp.org is 193.238.191.249
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 4 127.0.0.1/46812 reply 1.lede.pool.ntp.org is NODATA-IPv6
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 5 127.0.0.1/42455 query[A] 2.lede.pool.ntp.org from 127.0.0.1
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 5 127.0.0.1/42455 forwarded 2.lede.pool.ntp.org to 62.179.1.61
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 6 127.0.0.1/42455 query[AAAA] 2.lede.pool.ntp.org from 127.0.0.1
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 6 127.0.0.1/42455 forwarded 2.lede.pool.ntp.org to 62.179.1.61
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 6 127.0.0.1/42455 reply 2.lede.pool.ntp.org is 2a00:fb20:1:fffc::16
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 6 127.0.0.1/42455 reply 2.lede.pool.ntp.org is 2a00:d5c0:10:10::100
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 6 127.0.0.1/42455 reply 2.lede.pool.ntp.org is 2001:67c:24c:1::21
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 6 127.0.0.1/42455 reply 2.lede.pool.ntp.org is 2a02:f40:10:1::3
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 5 127.0.0.1/42455 reply 2.lede.pool.ntp.org is 195.46.37.22
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 5 127.0.0.1/42455 reply 2.lede.pool.ntp.org is 194.177.4.2
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 5 127.0.0.1/42455 reply 2.lede.pool.ntp.org is 188.112.42.5
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 5 127.0.0.1/42455 reply 2.lede.pool.ntp.org is 193.219.28.2
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 7 127.0.0.1/41779 query[A] 3.lede.pool.ntp.org from 127.0.0.1
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 7 127.0.0.1/41779 forwarded 3.lede.pool.ntp.org to 62.179.1.61
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 8 127.0.0.1/41779 query[AAAA] 3.lede.pool.ntp.org from 127.0.0.1
Thu Mar  9 16:34:00 2017 daemon.info dnsmasq[2839]: 8 127.0.0.1/41779 forwarded 3.lede.pool.ntp.org to 62.179.1.61
Thu Mar  9 16:34:01 2017 daemon.info dnsmasq[2839]: 8 127.0.0.1/41779 reply 3.lede.pool.ntp.org is NODATA-IPv6
Thu Mar  9 16:34:01 2017 daemon.info dnsmasq[2839]: 7 127.0.0.1/41779 reply 3.lede.pool.ntp.org is 159.253.242.123
Thu Mar  9 16:34:01 2017 daemon.info dnsmasq[2839]: 7 127.0.0.1/41779 reply 3.lede.pool.ntp.org is 94.154.96.7
Thu Mar  9 16:34:01 2017 daemon.info dnsmasq[2839]: 7 127.0.0.1/41779 reply 3.lede.pool.ntp.org is 194.177.4.1
Thu Mar  9 16:34:01 2017 daemon.info dnsmasq[2839]: 7 127.0.0.1/41779 reply 3.lede.pool.ntp.org is 192.86.14.67
Thu Mar  9 16:34:02 2017 daemon.info dnsmasq[2839]: read /etc/hosts - 4 addresses
Thu Mar  9 16:34:02 2017 daemon.info dnsmasq[2839]: read /tmp/hosts/dhcp.cfg02411c - 1 addresses
Thu Mar  9 16:34:21 2017 daemon.notice netifd: Network device 'eth0' link is up
Thu Mar  9 16:34:21 2017 daemon.notice netifd: bridge 'br-lan' link is up
Thu Mar  9 16:34:21 2017 daemon.notice netifd: Interface 'lan' has link connectivity 
Thu Mar  9 16:34:21 2017 kern.info kernel: [   39.790286] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
Thu Mar  9 16:34:21 2017 kern.info kernel: [   39.790594] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
Thu Mar  9 16:34:21 2017 kern.info kernel: [   39.790864] br-lan: port 1(eth0) entered forwarding state
Thu Mar  9 16:34:21 2017 kern.info kernel: [   39.791095] br-lan: port 1(eth0) entered forwarding state
Thu Mar  9 16:34:21 2017 kern.info kernel: [   39.791481] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Thu Mar  9 16:34:23 2017 kern.info kernel: [   41.781052] br-lan: port 1(eth0) entered forwarding state
Thu Mar  9 16:34:26 2017 daemon.info dnsmasq[2839]: exiting on receipt of SIGTERM
Thu Mar  9 16:34:26 2017 daemon.info dnsmasq[3052]: started, version 2.76 cachesize 150
Thu Mar  9 16:34:26 2017 daemon.info dnsmasq[3052]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-

auth no-DNSSEC no-ID loop-detect inotify
Thu Mar  9 16:34:26 2017 daemon.info dnsmasq[3052]: DNS service limited to local subnets
Thu Mar  9 16:34:26 2017 daemon.info dnsmasq-dhcp[3052]: DHCP, static leases only on 192.168.1.100, lease time 1d
Thu Mar  9 16:34:26 2017 daemon.info dnsmasq[3052]: using local addresses only for domain lan
Thu Mar  9 16:34:26 2017 daemon.info dnsmasq[3052]: reading /tmp/resolv.conf.auto
Thu Mar  9 16:34:26 2017 daemon.info dnsmasq[3052]: using local addresses only for domain lan
Thu Mar  9 16:34:26 2017 daemon.info dnsmasq[3052]: using nameserver 62.179.1.61#53
Thu Mar  9 16:34:26 2017 daemon.info dnsmasq[3052]: using nameserver 62.179.1.63#53
Thu Mar  9 16:34:26 2017 daemon.info dnsmasq[3052]: read /etc/hosts - 4 addresses
Thu Mar  9 16:34:26 2017 daemon.info dnsmasq[3052]: read /tmp/hosts/dhcp.cfg02411c - 1 addresses
Thu Mar  9 16:34:26 2017 daemon.info dnsmasq-dhcp[3052]: read /etc/ethers - 0 addresses
Thu Mar  9 16:35:31 2017 daemon.notice netifd: Network device 'eth0' link is down
Thu Mar  9 16:35:31 2017 kern.info kernel: [  109.235490] e1000e: eth0 NIC Link is Down
Thu Mar  9 16:35:31 2017 kern.info kernel: [  109.235703] br-lan: port 1(eth0) entered disabled state
Thu Mar  9 16:35:32 2017 daemon.notice netifd: bridge 'br-lan' link is down
Thu Mar  9 16:35:32 2017 daemon.notice netifd: Interface 'lan' has link connectivity loss
Thu Mar  9 16:35:35 2017 daemon.notice netifd: Network device 'eth0' link is up
Thu Mar  9 16:35:35 2017 daemon.notice netifd: bridge 'br-lan' link is up
Thu Mar  9 16:35:35 2017 daemon.notice netifd: Interface 'lan' has link connectivity 
Thu Mar  9 16:35:35 2017 kern.info kernel: [  112.965526] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Thu Mar  9 16:35:35 2017 kern.info kernel: [  112.965865] br-lan: port 1(eth0) entered forwarding state
Thu Mar  9 16:35:35 2017 kern.info kernel: [  112.966092] br-lan: port 1(eth0) entered forwarding state
Thu Mar  9 16:35:37 2017 kern.info kernel: [  114.956330] br-lan: port 1(eth0) entered forwarding state

Intel DQ77KB + Celeron G1620 + WLE900VX (Luci Obsy 19.07) + UPC300
R6220 (Luci Obsy 19.07) + E3272S-153 ndis

Cezary · 2017-03-09 22:30:58

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,862

Odp: Testuję pasmo 5GHz

Tzn gdzie bo to nie jest od początku?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary · 2017-03-09 22:32:15

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,862

Odp: Testuję pasmo 5GHz

Thu Mar 9 16:33:51 2017 daemon.notice netifd: radio0 (1913): command failed: Too many open files in system (-23)

To ew może być problemem.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

pacuro · 2017-03-09 23:16:40

pacuro
Użytkownik
Nieaktywny

Zarejestrowany: 2015-01-12
Posty: 105

Odp: Testuję pasmo 5GHz

Tak ucięło początek, jednak nic tam nie było nadzwyczajnego/niepokojącego.
Myślałem jeszcze o tym:
Thu Mar 9 16:33:51 2017 daemon.notice netifd: radio0 (1913): cat: can't open '/var/run/wifi-phy0.pid': No such file or directory
Thu Mar 9 16:33:51 2017 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf

Intel DQ77KB + Celeron G1620 + WLE900VX (Luci Obsy 19.07) + UPC300
R6220 (Luci Obsy 19.07) + E3272S-153 ndis

Cezary · 2017-03-09 23:23:40

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,862

Odp: Testuję pasmo 5GHz

To jest następstwo w/w

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

pacuro · 2017-03-10 17:23:22

pacuro
Użytkownik
Nieaktywny

Zarejestrowany: 2015-01-12
Posty: 105

Odp: Testuję pasmo 5GHz

Wróciłem do konfiguracji pci-e dla 5ghz + mini pci-e 2,4ghz bo przynajmniej mam sieć 5ghz po rebootach.
Cezary - poniżej logi po włączeniu i wyłączeniu karty AR5B125, która nie rozgłasza ssid, mimo, że w gui wszystko wygląda ok.

Fri Mar 10 17:09:19 2017 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Fri Mar 10 17:09:19 2017 kern.info kernel: [36539.107434] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Fri Mar 10 17:09:19 2017 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Fri Mar 10 17:09:19 2017 daemon.err hostapd: Using interface wlan1 with hwaddr <mac mojej karty> and ssid "Rp24"
Fri Mar 10 17:09:19 2017 kern.info kernel: [36539.133972] device wlan1 entered promiscuous mode
Fri Mar 10 17:09:19 2017 kern.info kernel: [36539.189658] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Fri Mar 10 17:09:19 2017 kern.info kernel: [36539.189861] br-lan: port 3(wlan1) entered forwarding state
Fri Mar 10 17:09:19 2017 kern.info kernel: [36539.190025] br-lan: port 3(wlan1) entered forwarding state
Fri Mar 10 17:09:19 2017 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->ENABLED
Fri Mar 10 17:09:19 2017 daemon.notice hostapd: wlan1: AP-ENABLED 
Fri Mar 10 17:09:19 2017 daemon.notice netifd: Network device 'wlan1' link is up
Fri Mar 10 17:09:21 2017 kern.info kernel: [36541.188965] br-lan: port 3(wlan1) entered forwarding state

Fri Mar 10 17:15:45 2017 kern.info kernel: [36925.270679] device wlan1 left promiscuous mode
Fri Mar 10 17:15:45 2017 kern.info kernel: [36925.270834] br-lan: port 3(wlan1) entered disabled state
Fri Mar 10 17:15:45 2017 daemon.notice hostapd: wlan1: interface state ENABLED->DISABLED
Fri Mar 10 17:15:45 2017 daemon.notice hostapd: wlan1: AP-DISABLED 
Fri Mar 10 17:15:45 2017 daemon.notice hostapd: wlan1: CTRL-EVENT-TERMINATING 
Fri Mar 10 17:15:45 2017 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Fri Mar 10 17:15:45 2017 daemon.notice hostapd: nl80211: Failed to remove interface wlan1 from bridge br-lan: Invalid argument

oraz info o samej karcie
TP-WN721N iw phy0 info

root@RobP:~# iw phy1 info
Wiphy phy1
        max # scan SSIDs: 4
        max scan IEs length: 2257 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Device supports AP-side u-APSD.
        Device supports T-DLS.
        Available Antennas: TX 0x1 RX 0x1
        Configured Antennas: TX 0x1 RX 0x1
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * AP/VLAN
                 * monitor
                 * mesh point
                 * P2P-client
                 * P2P-GO
                 * outside context of a BSS
        Band 1:
                Capabilities: 0x11ef
                        RX LDPC
                        HT20/HT40
                        SM Power Save disabled
                        RX HT20 SGI
                        RX HT40 SGI
                        TX STBC
                        RX STBC 1-stream
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 8 usec (0x06)
                HT TX/RX MCS rate indexes supported: 0-7
                Frequencies:
                        * 2412 MHz [1] (16.0 dBm)
                        * 2417 MHz [2] (16.0 dBm)
                        * 2422 MHz [3] (16.0 dBm)
                        * 2427 MHz [4] (16.0 dBm)
                        * 2432 MHz [5] (16.0 dBm)
                        * 2437 MHz [6] (16.0 dBm)
                        * 2442 MHz [7] (16.0 dBm)
                        * 2447 MHz [8] (16.0 dBm)
                        * 2452 MHz [9] (16.0 dBm)
                        * 2457 MHz [10] (16.0 dBm)
                        * 2462 MHz [11] (16.0 dBm)
                        * 2467 MHz [12] (16.0 dBm)
                        * 2472 MHz [13] (16.0 dBm)
                        * 2484 MHz [14] (disabled)
        valid interface combinations:
                 * #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1, #{ IBSS } <= 1,
                   total <= 2048, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz }

        HT Capability overrides:
                 * MCS: ff ff ff ff ff ff ff ff ff ff
                 * maximum A-MSDU length
                 * supported channel width
                 * short GI for 40 MHz
                 * max A-MPDU length exponent
                 * min MPDU start spacing

Intel DQ77KB + Celeron G1620 + WLE900VX (Luci Obsy 19.07) + UPC300
R6220 (Luci Obsy 19.07) + E3272S-153 ndis

Cezary · 2017-03-10 17:55:18

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,862

Odp: Testuję pasmo 5GHz

Za mało logów pokazałeś. Jeszcze kilknaście linii wyżej.

Fri Mar 10 17:09:19 2017 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

pacuro · 2017-03-10 21:13:44

pacuro
Użytkownik
Nieaktywny

Zarejestrowany: 2015-01-12
Posty: 105

Odp: Testuję pasmo 5GHz

Cały log od poweron, przez podpięcie się do działającej sieci 5,0 i włączenie karty 2,4.
Przejrzałem cały i jedyne co wyskakuje to ten sam błąd:
Fri Mar 10 20:50:36 2017 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Jednak wyskakuje on również dla działającej pierwszej karty:
Fri Mar 10 20:48:35 2017 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Gdy próbuję podejrzeć zawartość tych plików przez scp to dostaję komunikat:
Copying file /var/run/hostapd/wlan0 failed
Received error message from remote side: 'scp: /var/run/hostapd/wlan0: No such device or address'

Fri Mar 10 20:48:33 2017 kern.notice kernel: [    0.000000] Linux version 4.4.50 (cezary@eko.one.pl) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3106-c53bb97) ) #0 SMP Thu Feb 

23 16:34:14 2017
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=ffaa5425-02 rootfstype=ext4 rootwait console=tty0 

console=ttyS0,115200n8 noinitrd
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] x86/fpu: Using 'eager' FPU context switches.
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] e820: BIOS-provided physical RAM map:
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000039dacfff] usable
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x0000000039dad000-0x000000003a22bfff] reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x000000003a22c000-0x000000003a23bfff] ACPI data
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x000000003a23c000-0x000000003a35bfff] ACPI NVS
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x000000003a35c000-0x000000003a676fff] reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x000000003a677000-0x000000003a677fff] usable
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x000000003a678000-0x000000003a6bafff] ACPI NVS
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x000000003a6bb000-0x000000003affffff] usable
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x000000003b800000-0x000000003d9fffff] reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] NX (Execute Disable) protection: active
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] SMBIOS 2.7 present.
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] DMI: Intel DQ77KB/DQ77KB, BIOS KBQ7710H.86A.0058.2015.0729.1616 07/29/2015
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] e820: last_pfn = 0x100600 max_arch_pfn = 0x400000000
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] MTRR default type: uncachable
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] MTRR fixed ranges enabled:
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   00000-9FFFF write-back
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   A0000-BFFFF uncachable
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   C0000-D3FFF write-protect
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   D4000-E7FFF uncachable
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   E8000-FFFFF write-protect
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] MTRR variable ranges enabled:
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   0 base 000000000 mask F00000000 write-back
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   1 base 100000000 mask FFFC00000 write-back
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   2 base 100400000 mask FFFE00000 write-back
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   3 base 080000000 mask F80000000 uncachable
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   4 base 040000000 mask FC0000000 uncachable
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   5 base 03C000000 mask FFC000000 uncachable
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   6 base 03B800000 mask FFF800000 uncachable
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   7 disabled
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   8 disabled
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   9 disabled
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] e820: update [mem 0x3b800000-0xffffffff] usable ==> reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] e820: last_pfn = 0x3b000 max_arch_pfn = 0x400000000
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] found SMP MP-table at [mem 0x000fd880-0x000fd88f] mapped at [ffff8800000fd880]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] BRK [0x0183a000, 0x0183afff] PGTABLE
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] BRK [0x0183b000, 0x0183bfff] PGTABLE
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] BRK [0x0183c000, 0x0183cfff] PGTABLE
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] BRK [0x0183d000, 0x0183dfff] PGTABLE
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] BRK [0x0183e000, 0x0183efff] PGTABLE
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] BRK [0x0183f000, 0x0183ffff] PGTABLE
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] ACPI: Early table checksum verification disabled
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 INTEL )
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.000000] ACPI: XSDT 0x000000003A22F080 00007C (v01 INTEL  DQ77KB   0000003A AMI  00010013)
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.000000] ACPI: FACP 0x000000003A2394E0 00010C (v05 INTEL  DQ77KB   0000003A AMI  00010013)
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.000000] ACPI: DSDT 0x000000003A22F188 00A351 (v02 INTEL  DQ77KB   0000003A INTL 20051117)
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.000000] ACPI: FACS 0x000000003A35A080 000040
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.000000] ACPI: APIC 0x000000003A2395F0 00005A (v03 INTEL  DQ77KB   0000003A AMI  00010013)
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.000000] ACPI: FPDT 0x000000003A239650 000044 (v01 INTEL  DQ77KB   0000003A AMI  00010013)
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.000000] ACPI: TCPA 0x000000003A239698 000032 (v02 INTEL  DQ77KB   0000003A MSFT 01000013)
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.000000] ACPI: MCFG 0x000000003A2396D0 00003C (v01 INTEL  DQ77KB   0000003A MSFT 00000097)
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.000000] ACPI: HPET 0x000000003A239710 000038 (v01 INTEL  DQ77KB   0000003A AMI. 00000005)
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.000000] ACPI: SSDT 0x000000003A239748 00036D (v01 INTEL  DQ77KB   0000003A INTL 20091112)
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.000000] ACPI: SSDT 0x000000003A239AB8 0008A2 (v01 INTEL  DQ77KB   0000003A INTL 20051117)
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.000000] ACPI: SSDT 0x000000003A23A360 00083B (v01 INTEL  DQ77KB   0000003A INTL 20051117)
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.000000] ACPI: SSDT 0x000000003A23ABA0 000B22 (v01 INTEL  DQ77KB   0000003A INTL 20051117)
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.000000] ACPI: ASF! 0x000000003A23B6C8 0000A5 (v32 INTEL  DQ77KB   0000003A TFSM 000F4240)
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] Zone ranges:
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000100000000-0x00000001005fffff]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] Movable zone start for each node
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] Early memory node ranges
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000020200000-0x0000000039dacfff]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000]   node   0: [mem 0x000000003a677000-0x000000003a677fff]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000]   node   0: [mem 0x000000003a6bb000-0x000000003affffff]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000100000000-0x00000001005fffff]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001005fffff]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] On node 0 totalpages: 240272
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   DMA zone: 64 pages used for memmap
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   DMA zone: 21 pages reserved
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   DMA zone: 3997 pages, LIFO batch:0
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   DMA32 zone: 3668 pages used for memmap
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   DMA32 zone: 234739 pages, LIFO batch:31
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   Normal zone: 24 pages used for memmap
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000]   Normal zone: 1536 pages, LIFO batch:0
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] Reserving Intel graphics stolen memory at 0x3ba00000-0x3d9fffff
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] ACPI: IRQ0 used by override.
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] ACPI: IRQ9 used by override.
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] e820: [mem 0x3da00000-0xf7ffffff] available for PCI devices
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880100200000 s85016 r8192 d29672 u2097152
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] pcpu-alloc: s85016 r8192 d29672 u2097152 alloc=1*2097152
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 236495
Fri Mar 10 20:48:33 2017 kern.notice kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=ffaa5425-02 rootfstype=ext4 rootwait 

console=tty0 console=ttyS0,115200n8 noinitrd
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] Memory: 866364K/961088K available (4759K kernel code, 446K rwdata, 1796K rodata, 864K init, 524K bss, 94724K 

reserved, 0K cma-reserved)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] Hierarchical RCU implementation.
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000]     CONFIG_RCU_FANOUT set to non-default value of 32
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000]     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] NR_IRQS:4352 nr_irqs:256 16
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] Console: colour VGA+ 80x25
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] console [tty0] enabled
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] console [ttyS0] enabled
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.000000] hpet clockevent registered
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] tsc: Fast TSC calibration using PIT
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000000] tsc: Detected 2693.920 MHz processor
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.84 BogoMIPS (lpj=26939200)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000399] pid_max: default: 32768 minimum: 301
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.000583] ACPI: Core revision 20150930
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.006114] ACPI: 5 ACPI AML tables successfully acquired and loaded
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.006442] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.006680] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.007040] CPU: Physical Processor ID: 0
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.007208] CPU: Processor Core ID: 0
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.007372] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.007587] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.007822] mce: CPU supports 7 MCE banks
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.008001] CPU0: Thermal monitoring enabled (TM1)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.008190] process: using mwait in idle threads
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.008376] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.008578] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.012878] Freeing SMP alternatives memory: 20K (ffffffff817b1000 - ffffffff817b6000)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.016072] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.116293] TSC deadline timer enabled
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.116296] smpboot: CPU0: Intel(R) Celeron(R) CPU G1620 @ 2.70GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.116777] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.117370] ... version:                3
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.117536] ... bit width:              48
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.117706] ... generic registers:      8
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.117875] ... value mask:             0000ffffffffffff
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.118072] ... max period:             00007fffffffffff
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.118269] ... fixed-purpose events:   3
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.118435] ... event mask:             00000007000000ff
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.118736] x86: Booted up 1 node, 1 CPUs
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.118906] smpboot: Total of 1 processors activated (5387.84 BogoMIPS)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.119796] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.120253] NET: Registered protocol family 16
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.120510] cpuidle: using governor ladder
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.120722] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.120998] ACPI: bus type PCI registered
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.121163] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.121413] PCI: Using configuration type 1 for base access
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.121662] perf_event_intel: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.123631] ACPI: Added _OSI(Module Device)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.123807] ACPI: Added _OSI(Processor Device)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.123983] ACPI: Added _OSI(3.0 _SCP Extensions)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.124164] ACPI: Added _OSI(Processor Aggregator Device)
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.126016] ACPI: Executed 1 blocks of module-level executable AML code
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.128655] ACPI: Interpreter enabled
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.128820] ACPI: (supports S0 S5)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.128974] ACPI: Using IOAPIC for interrupt routing
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.129180] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.133866] ACPI: Power Resource [FN00] (off)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.134097] ACPI: Power Resource [FN01] (off)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.134326] ACPI: Power Resource [FN02] (off)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.134554] ACPI: Power Resource [FN03] (off)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.134782] ACPI: Power Resource [FN04] (off)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.135312] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.135535] acpi PNP0A08:00: _OSC: OS supports [Segments MSI]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.135869] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.136480] PCI host bridge to bus 0000:00
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.136655] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.136886] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.137118] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.137392] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.137663] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.137934] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.138813] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.139088] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.139361] pci_bus 0000:00: root bus resource [mem 0x3da00000-0xfeafffff window]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.139634] pci_bus 0000:00: root bus resource [bus 00-3e]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.139841] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.139908] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.139933] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.139986] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.139997] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.140002] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.140005] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.140083] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.140111] pci 0000:00:14.0: reg 0x10: [mem 0xf7f20000-0xf7f2ffff 64bit]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.140167] pci 0000:00:14.0: PME# supported from D3hot D3cold
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.140224] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.140255] pci 0000:00:16.0: reg 0x10: [mem 0xf7f37000-0xf7f3700f 64bit]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.140316] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.140372] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.140399] pci 0000:00:16.3: reg 0x10: [io  0xf080-0xf087]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.140408] pci 0000:00:16.3: reg 0x14: [mem 0xf7f35000-0xf7f35fff]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.140516] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.140540] pci 0000:00:19.0: reg 0x10: [mem 0xf7f00000-0xf7f1ffff]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.140548] pci 0000:00:19.0: reg 0x14: [mem 0xf7f34000-0xf7f34fff]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.140556] pci 0000:00:19.0: reg 0x18: [io  0xf060-0xf07f]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.140604] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.140661] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.140688] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f33000-0xf7f333ff]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.140757] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.140820] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.140936] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.141003] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.141118] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.141186] pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.141300] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.141365] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.141392] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f32000-0xf7f323ff]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.141461] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.141511] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.141608] pci 0000:00:1f.0: [8086:1e47] type 00 class 0x060100
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.141755] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.141770] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f31000-0xf7f310ff 64bit]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.141790] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.141882] pci 0000:01:00.0: [168c:0030] type 00 class 0x028000
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.141904] pci 0000:01:00.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff 64bit]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.141935] pci 0000:01:00.0: reg 0x30: [mem 0xf7e20000-0xf7e2ffff pref]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.141958] pci 0000:01:00.0: supports D1
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.141959] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.141981] pci 0000:00:01.0: PCI bridge to [bus 01]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.142173] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.142234] pci 0000:00:1c.0: PCI bridge to [bus 02]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.142524] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.142586] pci 0000:03:00.0: reg 0x10: [mem 0xf7d00000-0xf7d7ffff 64bit]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.142674] pci 0000:03:00.0: reg 0x30: [mem 0xf7d80000-0xf7d8ffff pref]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.142752] pci 0000:03:00.0: supports D1 D2
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.142753] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.142788] pci 0000:00:1c.2: PCI bridge to [bus 03]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.142987] pci 0000:00:1c.2:   bridge window [mem 0xf7d00000-0xf7dfffff]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.143145] pci 0000:04:00.0: [8086:10d3] type 00 class 0x020000
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.143219] pci 0000:04:00.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.143265] pci 0000:04:00.0: reg 0x18: [io  0xe000-0xe01f]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.143288] pci 0000:04:00.0: reg 0x1c: [mem 0xf7c20000-0xf7c23fff]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.143451] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.143493] pci 0000:00:1c.6: PCI bridge to [bus 04]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.143684] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.143688] pci 0000:00:1c.6:   bridge window [mem 0xf7c00000-0xf7cfffff]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.143748] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.143981] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.143983] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.143984] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.143986] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.143987] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.143988] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.143990] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.143991] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.143992] pci 0000:00:1e.0:   bridge window [mem 0x3da00000-0xfeafffff window] (subtractive decode)
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.144023] pci_bus 0000:00: on NUMA node 0
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.144408] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.145169] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.146062] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.146821] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.147582] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.148344] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.149255] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.150164] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.151039] ACPI: Enabled 7 GPEs in block 00 to 3F
Fri Mar 10 20:48:33 2017 kern.notice kernel: [    0.151411] SCSI subsystem initialized
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.152742] libata version 3.00 loaded.
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.152750] ACPI: bus type USB registered
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.152939] usbcore: registered new interface driver usbfs
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.153150] usbcore: registered new interface driver hub
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.153353] usbcore: registered new device driver usb
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.153595] PCI: Using ACPI for IRQ routing
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.153770] PCI: pci_cache_line_size set to 64 bytes
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.153898] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.153900] e820: reserve RAM buffer [mem 0x39dad000-0x3bffffff]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.153901] e820: reserve RAM buffer [mem 0x3a678000-0x3bffffff]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.153902] e820: reserve RAM buffer [mem 0x3b000000-0x3bffffff]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.153903] e820: reserve RAM buffer [mem 0x100600000-0x103ffffff]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.154023] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.154647] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Fri Mar 10 20:48:33 2017 kern.notice kernel: [    0.156870] amd_nb: Cannot enumerate AMD northbridges
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.157232] clocksource: Switched to clocksource hpet
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.157483] pnp: PnP ACPI init
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.157718] system 00:00: [io  0x0680-0x069f] has been reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.157927] system 00:00: [io  0x1100-0x110f] has been reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.158135] system 00:00: [io  0xffff] has been reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.158332] system 00:00: [io  0xffff] has been reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.158531] system 00:00: [io  0x0400-0x0453] could not be reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.158750] system 00:00: [io  0x0458-0x047f] has been reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.158962] system 00:00: [io  0x0500-0x057f] has been reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.159174] system 00:00: [io  0x164e-0x164f] has been reserved
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.159387] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.159403] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.159433] system 00:02: [io  0x0454-0x0457] has been reserved
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.159647] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.159717] system 00:03: [io  0x0a30-0x0a4f] has been reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.159929] system 00:03: [io  0x0a00-0x0a0f] has been reserved
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.160141] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.160188] system 00:04: [io  0x04d0-0x04d1] has been reserved
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.160404] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.160506] pnp 00:05: Plug and Play ACPI device, IDs PNP0c31 (active)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.160665] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.160897] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.161124] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.161350] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.161579] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.161806] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.162032] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.162259] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.162487] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.162714] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.162949] system 00:06: [mem 0x3da00000-0x3da00fff] has been reserved
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.163177] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.163307] system 00:07: [mem 0x20000000-0x201fffff] has been reserved
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.163536] system 00:07: [mem 0x40004000-0x40004fff] has been reserved
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.163765] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.163779] pnp: PnP ACPI: found 8 devices
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.168887] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.169245] pci 0000:00:01.0: PCI bridge to [bus 01]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.169433] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.169664] pci 0000:00:1c.0: PCI bridge to [bus 02]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.169867] pci 0000:00:1c.2: PCI bridge to [bus 03]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.170059] pci 0000:00:1c.2:   bridge window [mem 0xf7d00000-0xf7dfffff]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.170299] pci 0000:00:1c.6: PCI bridge to [bus 04]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.170491] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.170710] pci 0000:00:1c.6:   bridge window [mem 0xf7c00000-0xf7cfffff]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.170948] pci 0000:00:1e.0: PCI bridge to [bus 05]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171145] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171146] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171148] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171149] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171151] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171152] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171153] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171155] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff window]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171156] pci_bus 0000:00: resource 12 [mem 0x3da00000-0xfeafffff window]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171158] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171159] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171161] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171162] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171163] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171165] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171166] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171167] pci_bus 0000:05: resource 7 [mem 0x000d4000-0x000d7fff window]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171169] pci_bus 0000:05: resource 8 [mem 0x000d8000-0x000dbfff window]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171170] pci_bus 0000:05: resource 9 [mem 0x000dc000-0x000dffff window]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171171] pci_bus 0000:05: resource 10 [mem 0x000e0000-0x000e3fff window]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171173] pci_bus 0000:05: resource 11 [mem 0x000e4000-0x000e7fff window]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.171174] pci_bus 0000:05: resource 12 [mem 0x3da00000-0xfeafffff window]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.171197] NET: Registered protocol family 2
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.171458] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.171712] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.171963] TCP: Hash tables configured (established 8192 bind 8192)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.172199] UDP hash table entries: 512 (order: 2, 16384 bytes)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.172415] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.172661] NET: Registered protocol family 1
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.172853] pmd_set_huge: Cannot satisfy [mem 0xf7800000-0xf7a00000] with a huge-page mapping due to MTRR override.
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.173204] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.173487] pci 0000:00:02.0: Video device with shadowed ROM
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.217178] PCI: CLS mismatch (64 != 32), using 64 bytes
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.217223] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.217454] software IO TLB [mem 0x34bad000-0x38bad000] (64MB) mapped at [ffff880034bad000-ffff880038bacfff]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.217830] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.218132] hw unit of domain pp0-core 2^-16 Joules
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.218320] hw unit of domain package 2^-16 Joules
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.218506] hw unit of domain pp1-gpu 2^-16 Joules
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.218884] futex hash table entries: 256 (order: 2, 16384 bytes)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.220574] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.221393] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.221670] io scheduler noop registered
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.221837] io scheduler deadline registered (default)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.222462] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.222678] hv_vmbus: registering driver hyperv_fb
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.222922] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.223220] ACPI: Power Button [PWRB]
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.223403] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.223678] ACPI: Power Button [PWRF]
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.224063] Monitor-Mwait will be used to enter C-1 state
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.224147] Monitor-Mwait will be used to enter C-2 state
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.224151] ACPI: acpi_idle registered with cpuidle
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.224462] thermal LNXTHERM:00: registered as thermal_zone0
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.224671] ACPI: Thermal Zone [TZ00] (28 C)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.224978] thermal LNXTHERM:01: registered as thermal_zone1
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.225187] ACPI: Thermal Zone [TZ01] (30 C)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.225406] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.246355] 0000:00:16.3: ttyS4 at I/O 0xf080 (irq = 19, base_baud = 115200) is a 16550A
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.246776] Non-volatile memory driver v1.3
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.248017] loop: module loaded
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.248187] Guest personality initialized and is inactive
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.248396] VMCI host device registered (name=vmci, major=10, minor=63)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.248626] Initialized host personality
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.248836] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 

0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.249422] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.249760] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 

0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.250338] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 

0x0000000000000500-0x000000000000054F (\_GPE.GPIO) (20150930/utaddress-254)
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.250930] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 

0x0000000000000500-0x000000000000054F (\_GPE.GPS0) (20150930/utaddress-254)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.251518] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.251853] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 

0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.252434] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 

0x0000000000000500-0x000000000000054F (\_GPE.GPIO) (20150930/utaddress-254)
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.253023] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 

0x0000000000000500-0x000000000000054F (\_GPE.GPS0) (20150930/utaddress-254)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.253615] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.253950] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 

0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.254528] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 

0x0000000000000500-0x000000000000054F (\_GPE.GPIO) (20150930/utaddress-254)
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.255118] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 

0x0000000000000500-0x000000000000054F (\_GPE.GPS0) (20150930/utaddress-254)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.255708] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

Intel DQ77KB + Celeron G1620 + WLE900VX (Luci Obsy 19.07) + UPC300
R6220 (Luci Obsy 19.07) + E3272S-153 ndis

pacuro · 2017-03-10 21:14:50

pacuro
Użytkownik
Nieaktywny

Zarejestrowany: 2015-01-12
Posty: 105

Odp: Testuję pasmo 5GHz

Fri Mar 10 20:48:33 2017 kern.warn kernel: [    0.256042] lpc_ich: Resource conflict(s) found affecting gpio_ich
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.256285] VMware PVSCSI driver - version 1.0.5.0-k
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.256485] hv_vmbus: registering driver hv_storvsc
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.257103] scsi host0: pata_legacy
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.257287] ata1: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.417351] scsi host1: pata_legacy
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.417526] ata2: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.577177] VMware vmxnet3 virtual NIC driver - version 1.4.5.0-k-NAPI
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.577414] hv_vmbus: registering driver hv_netvsc
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.577603] Fusion MPT base driver 3.04.20
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.577772] Copyright (c) 1999-2008 LSI Corporation
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.577965] Fusion MPT SPI Host driver 3.04.20
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.578150] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.578379] ehci-pci: EHCI PCI platform driver
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.578652] ehci-pci 0000:00:1a.0: EHCI Host Controller
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.578853] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.579137] ehci-pci 0000:00:1a.0: debug port 2
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.583199] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.583206] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f33000
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.597086] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.597397] hub 1-0:1.0: USB hub found
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.597571] hub 1-0:1.0: 3 ports detected
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.597893] ehci-pci 0000:00:1d.0: EHCI Host Controller
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.598092] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.598980] ehci-pci 0000:00:1d.0: debug port 2
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.603065] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.603072] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f32000
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.617092] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.617387] hub 2-0:1.0: USB hub found
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.617559] hub 2-0:1.0: 3 ports detected
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.617799] ehci-platform: EHCI generic platform driver
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.618007] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.618231] ohci-pci: OHCI PCI platform driver
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.618416] ohci-platform: OHCI generic platform driver
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.618619] uhci_hcd: USB Universal Host Controller Interface driver
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.618928] xhci_hcd 0000:00:14.0: xHCI Host Controller
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.619126] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.620491] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    0.620789] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.620962] hub 3-0:1.0: USB hub found
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.621138] hub 3-0:1.0: 4 ports detected
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.621525] xhci_hcd 0000:00:14.0: xHCI Host Controller
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.621724] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.622066] hub 4-0:1.0: USB hub found
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.622241] hub 4-0:1.0: 4 ports detected
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.622650] usbcore: registered new interface driver usb-storage
Fri Mar 10 20:48:33 2017 kern.info kernel: [    0.622888] i8042: PNP: No PS/2 controller found. Probing ports directly.
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.727159] i8042: No controller found
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.727325] hv_vmbus: registering driver hyperv_keyboard
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.727544] rtc_cmos 00:01: RTC can wake from S4
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.727821] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.728064] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.728356] sdhci: Secure Digital Host Controller Interface driver
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.728576] sdhci: Copyright(c) Pierre Ossman
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.729003] hidraw: raw HID events driver (C) Jiri Kosina
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.729215] hv_vmbus: registering driver hid_hyperv
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.729408] hv_utils: Registering HyperV Utility Driver
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.729605] hv_vmbus: registering driver hv_util
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.729788] hv_vmbus: registering driver hv_balloon
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.730092] NET: Registered protocol family 10
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.730528] tsc: Refined TSC clocksource calibration: 2693.885 MHz
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.730746] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d4add4d45, max_idle_ns: 440795315324 ns
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.731226] NET: Registered protocol family 17
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.731414] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load 

br_netfilter if you need this.
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.731808] 8021q: 802.1Q VLAN Support v1.8
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.731997] NET: Registered protocol family 40
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.732294] registered taskstats version 1
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.732886] rtc_cmos 00:01: setting system clock to 2017-03-10 19:48:28 UTC (1489175308)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.733418] Waiting for root device PARTUUID=ffaa5425-02...
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.947059] usb 1-1: new high-speed USB device number 2 using ehci-pci
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.947322] usb 2-1: new high-speed USB device number 2 using ehci-pci
Fri Mar 10 20:48:33 2017 kern.info kernel: [    1.947585] usb 3-4: new high-speed USB device number 2 using xhci_hcd
Fri Mar 10 20:48:33 2017 kern.info kernel: [    2.087738] usb-storage 3-4:1.0: USB Mass Storage device detected
Fri Mar 10 20:48:33 2017 kern.info kernel: [    2.088045] scsi host2: usb-storage 3-4:1.0
Fri Mar 10 20:48:33 2017 kern.info kernel: [    2.097562] hub 2-1:1.0: USB hub found
Fri Mar 10 20:48:33 2017 kern.info kernel: [    2.097758] hub 1-1:1.0: USB hub found
Fri Mar 10 20:48:33 2017 kern.info kernel: [    2.097953] hub 2-1:1.0: 8 ports detected
Fri Mar 10 20:48:33 2017 kern.info kernel: [    2.098138] hub 1-1:1.0: 6 ports detected
Fri Mar 10 20:48:33 2017 kern.info kernel: [    2.727072] clocksource: Switched to clocksource tsc
Fri Mar 10 20:48:33 2017 kern.notice kernel: [    3.087327] scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer Fit       1.27 PQ: 0 ANSI: 6
Fri Mar 10 20:48:33 2017 kern.notice kernel: [    3.087983] sd 2:0:0:0: [sda] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
Fri Mar 10 20:48:33 2017 kern.notice kernel: [    3.089440] sd 2:0:0:0: [sda] Write Protect is off
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    3.089649] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
Fri Mar 10 20:48:33 2017 kern.notice kernel: [    3.089904] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Fri Mar 10 20:48:33 2017 kern.info kernel: [    3.092473]  sda: sda1 sda2
Fri Mar 10 20:48:33 2017 kern.notice kernel: [    3.093620] sd 2:0:0:0: [sda] Attached SCSI removable disk
Fri Mar 10 20:48:33 2017 kern.info kernel: [    3.166458] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    3.166730] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
Fri Mar 10 20:48:33 2017 kern.info kernel: [    3.167175] Freeing unused kernel memory: 864K (ffffffff816d9000 - ffffffff817b1000)
Fri Mar 10 20:48:33 2017 user.info kernel: [    3.235360] init: Console is alive
Fri Mar 10 20:48:33 2017 kern.info kernel: [    3.490477] pps_core: LinuxPPS API ver. 1 registered
Fri Mar 10 20:48:33 2017 kern.info kernel: [    3.490690] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Fri Mar 10 20:48:33 2017 kern.info kernel: [    3.491886] PTP clock support registered
Fri Mar 10 20:48:33 2017 kern.info kernel: [    3.494215] Button Hotplug driver version 0.4.1
Fri Mar 10 20:48:33 2017 user.info kernel: [    3.507180] init: - preinit -
Fri Mar 10 20:48:33 2017 kern.notice kernel: [    3.545814] random: jshn: uninitialized urandom read (4 bytes read, 27 bits of entropy available)
Fri Mar 10 20:48:33 2017 kern.notice kernel: [    3.550470] random: jshn: uninitialized urandom read (4 bytes read, 27 bits of entropy available)
Fri Mar 10 20:48:33 2017 kern.notice kernel: [    3.552041] random: jshn: uninitialized urandom read (4 bytes read, 27 bits of entropy available)
Fri Mar 10 20:48:33 2017 kern.notice kernel: [    3.556482] random: jshn: uninitialized urandom read (4 bytes read, 27 bits of entropy available)
Fri Mar 10 20:48:33 2017 kern.notice kernel: [    3.558595] random: jshn: uninitialized urandom read (4 bytes read, 27 bits of entropy available)
Fri Mar 10 20:48:33 2017 kern.notice kernel: [    3.560832] random: jshn: uninitialized urandom read (4 bytes read, 27 bits of entropy available)
Fri Mar 10 20:48:33 2017 user.notice kernel: [    5.588605] mount_root: mounting /dev/root
Fri Mar 10 20:48:33 2017 kern.warn kernel: [    5.588901] EXT4-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended
Fri Mar 10 20:48:33 2017 kern.info kernel: [    5.591003] EXT4-fs (sda2): re-mounted. Opts: (null)
Fri Mar 10 20:48:33 2017 user.info kernel: [    5.591236] mount_root: loading kmods from internal overlay
Fri Mar 10 20:48:33 2017 user.info kernel: [    6.156580] block: attempting to load /etc/config/fstab
Fri Mar 10 20:48:33 2017 user.info kernel: [    6.157521] block: extroot: not configured
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.178555] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
Fri Mar 10 20:48:33 2017 user.warn kernel: [    6.182047] urandom-seed: Seeding with /etc/urandom.seed
Fri Mar 10 20:48:33 2017 user.info kernel: [    6.185202] procd: - early -
Fri Mar 10 20:48:33 2017 kern.notice kernel: [    6.214610] random: jshn: uninitialized urandom read (4 bytes read, 45 bits of entropy available)
Fri Mar 10 20:48:33 2017 kern.notice kernel: [    6.226281] random: jshn: uninitialized urandom read (4 bytes read, 45 bits of entropy available)
Fri Mar 10 20:48:33 2017 kern.notice kernel: [    6.236660] random: jshn: uninitialized urandom read (4 bytes read, 45 bits of entropy available)
Fri Mar 10 20:48:33 2017 kern.notice kernel: [    6.246917] random: jshn: uninitialized urandom read (4 bytes read, 45 bits of entropy available)
Fri Mar 10 20:48:33 2017 user.info kernel: [    6.699761] procd: - ubus -
Fri Mar 10 20:48:33 2017 user.info kernel: [    6.750592] procd: - init -
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.771812] tun: Universal TUN/TAP device driver, 1.6
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.772022] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.774432] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.774684] e1000: Copyright (c) 1999-2006 Intel Corporation.
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.776314] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.776566] igb: Copyright (c) 2007-2014 Intel Corporation.
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.777778] ip6_tables: (C) 2000-2006 Netfilter Core Team
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.780060] i2c /dev entries driver
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.782372] u32 classifier
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.782522]     input device check on
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.782689]     Actions configured
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.782976] Mirror/redirect action on
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.784423] nf_conntrack version 0.5.0 (6775 buckets, 27100 max)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.785985] fuse init (API version 7.23)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.809920] usbcore: registered new interface driver cdc_acm
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.810142] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.810630] usbcore: registered new interface driver cdc_wdm
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.811077] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.811382] Backport generated by backports.git backports-20160324-13-g24da7d3c
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.812150] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.812375] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
Fri Mar 10 20:48:33 2017 kern.info kernel: [    6.812772] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.017286] e1000e 0000:00:19.0 eth0: registered PHC clock
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.017513] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) XX:XX:XX:XX:XX:XX
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.017816] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.018099] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.018429] e1000e 0000:04:00.0: Disabling ASPM  L1
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.018815] e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.143428] e1000e 0000:04:00.0 eth1: registered PHC clock
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.143642] e1000e 0000:04:00.0 eth1: (PCI Express:2.5GT/s:Width x1) XX:XX:XX:XX:XX:XX
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.143944] e1000e 0000:04:00.0 eth1: Intel(R) PRO/1000 Network Connection
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.144274] e1000e 0000:04:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.144857] ip_tables: (C) 2000-2006 Netfilter Core Team
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.149388] usbcore: registered new interface driver usblp
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.150366] usbcore: registered new interface driver usbserial
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.150594] usbcore: registered new interface driver usbserial_generic
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.150838] usbserial: USB Serial support registered for generic
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.154138] xt_time: kernel timezone is -0000
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.154500] usbcore: registered new interface driver cdc_ether
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.155038] usbcore: registered new interface driver cdc_ncm
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.159028] usbcore: registered new interface driver huawei_cdc_ncm
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.177850] PPP generic driver version 2.4.2
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.178261] NET: Registered protocol family 24
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.178656] usbcore: registered new interface driver qmi_wwan
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.179097] usbcore: registered new interface driver rndis_host
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.179474] usbcore: registered new interface driver sierra
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.179700] usbserial: USB Serial support registered for Sierra USB modem
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.180172] usbcore: registered new interface driver sierra_net
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.187868] usbcore: registered new interface driver cdc_mbim
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.188419] usbcore: registered new interface driver option
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.188647] usbserial: USB Serial support registered for GSM modem (1-port)
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.189476] usbcore: registered new interface driver qcserial
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.189704] usbserial: USB Serial support registered for Qualcomm USB modem
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    7.270610] ath: EEPROM regdomain: 0x21
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    7.270613] ath: EEPROM indicates we should expect a direct regpair map
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    7.270615] ath: Country alpha2 being used: AU
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    7.270616] ath: Regpair used: 0x21
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    7.277171] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.277599] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffc90000540000, irq=16
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.286824] ath: phy1: ASPM enabled: 0x43
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    7.287007] ath: EEPROM regdomain: 0x60
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    7.287008] ath: EEPROM indicates we should expect a direct regpair map
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    7.287010] ath: Country alpha2 being used: 00
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    7.287011] ath: Regpair used: 0x60
Fri Mar 10 20:48:33 2017 kern.debug kernel: [    7.299590] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Fri Mar 10 20:48:33 2017 kern.info kernel: [    7.300051] ieee80211 phy1: Atheros AR9485 Rev:1 mem=0xffffc90000600000, irq=18
Fri Mar 10 20:48:33 2017 user.notice : Added device handler type: 8021ad
Fri Mar 10 20:48:33 2017 user.notice : Added device handler type: 8021q
Fri Mar 10 20:48:33 2017 user.notice : Added device handler type: macvlan
Fri Mar 10 20:48:33 2017 user.notice : Added device handler type: bridge
Fri Mar 10 20:48:33 2017 user.notice : Added device handler type: Network device
Fri Mar 10 20:48:33 2017 user.notice : Added device handler type: tunnel
Fri Mar 10 20:48:33 2017 daemon.err block: /dev/sda2 is already mounted on /
Fri Mar 10 20:48:34 2017 daemon.err block: /dev/sda2 is already mounted on /
Fri Mar 10 20:48:34 2017 cron.info crond[1903]: crond (busybox 1.25.1) started, log level 8
Fri Mar 10 20:48:34 2017 daemon.notice netifd: Interface 'lan' is enabled
Fri Mar 10 20:48:34 2017 daemon.notice netifd: Interface 'lan' is setting up now
Fri Mar 10 20:48:34 2017 daemon.notice netifd: Interface 'lan' is now up
Fri Mar 10 20:48:34 2017 daemon.notice netifd: Interface 'loopback' is enabled
Fri Mar 10 20:48:34 2017 daemon.notice netifd: Interface 'loopback' is setting up now
Fri Mar 10 20:48:34 2017 daemon.notice netifd: Interface 'loopback' is now up
Fri Mar 10 20:48:34 2017 kern.info kernel: [    7.857336] device eth0 entered promiscuous mode
Fri Mar 10 20:48:34 2017 kern.info kernel: [    7.857658] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Fri Mar 10 20:48:34 2017 daemon.notice netifd: Interface 'wan' is enabled
Fri Mar 10 20:48:34 2017 daemon.notice netifd: Network device 'lo' link is up
Fri Mar 10 20:48:34 2017 daemon.notice netifd: Interface 'loopback' has link connectivity 
Fri Mar 10 20:48:34 2017 kern.info kernel: [    7.937437] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Fri Mar 10 20:48:34 2017 kern.info kernel: [    7.937663] 8021q: adding VLAN 0 to HW filter on device eth1
Fri Mar 10 20:48:34 2017 authpriv.info dropbear[1973]: Not backgrounding
Fri Mar 10 20:48:34 2017 kern.debug kernel: [    8.033540] ath: EEPROM regdomain: 0x8268
Fri Mar 10 20:48:34 2017 kern.debug kernel: [    8.033720] ath: EEPROM indicates we should expect a country code
Fri Mar 10 20:48:34 2017 kern.debug kernel: [    8.033945] ath: doing EEPROM country->regdmn map search
Fri Mar 10 20:48:34 2017 kern.debug kernel: [    8.034152] ath: country maps to regdmn code: 0x37
Fri Mar 10 20:48:34 2017 kern.debug kernel: [    8.034342] ath: Country alpha2 being used: PL
Fri Mar 10 20:48:34 2017 kern.debug kernel: [    8.034524] ath: Regpair used: 0x37
Fri Mar 10 20:48:34 2017 kern.debug kernel: [    8.034687] ath: regdomain 0x8268 dynamically updated by user
Fri Mar 10 20:48:34 2017 kern.debug kernel: [    8.034933] ath: EEPROM regdomain: 0x8268
Fri Mar 10 20:48:34 2017 kern.debug kernel: [    8.035107] ath: EEPROM indicates we should expect a country code
Fri Mar 10 20:48:34 2017 kern.debug kernel: [    8.035331] ath: doing EEPROM country->regdmn map search
Fri Mar 10 20:48:34 2017 kern.debug kernel: [    8.035535] ath: country maps to regdmn code: 0x37
Fri Mar 10 20:48:34 2017 kern.debug kernel: [    8.035727] ath: Country alpha2 being used: PL
Fri Mar 10 20:48:34 2017 kern.debug kernel: [    8.035910] ath: Regpair used: 0x37
Fri Mar 10 20:48:34 2017 kern.debug kernel: [    8.036071] ath: regdomain 0x8268 dynamically updated by user
Fri Mar 10 20:48:34 2017 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Fri Mar 10 20:48:34 2017 daemon.info procd: - init complete -
Fri Mar 10 20:48:35 2017 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Fri Mar 10 20:48:35 2017 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Fri Mar 10 20:48:35 2017 daemon.err hostapd: Using interface wlan0 with hwaddr XX:XX:XX:XX:XX:XX and ssid "Rp50"
Fri Mar 10 20:48:35 2017 kern.info kernel: [    9.105277] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Fri Mar 10 20:48:35 2017 kern.info kernel: [    9.106077] device wlan0 entered promiscuous mode
Fri Mar 10 20:48:35 2017 daemon.notice netifd: bridge 'br-lan' link is up
Fri Mar 10 20:48:35 2017 daemon.notice netifd: Interface 'lan' has link connectivity 
Fri Mar 10 20:48:35 2017 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->ENABLED
Fri Mar 10 20:48:35 2017 daemon.notice hostapd: wlan0: AP-ENABLED 
Fri Mar 10 20:48:35 2017 kern.info kernel: [    9.150936] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Fri Mar 10 20:48:35 2017 kern.info kernel: [    9.151192] br-lan: port 2(wlan0) entered forwarding state
Fri Mar 10 20:48:35 2017 kern.info kernel: [    9.151406] br-lan: port 2(wlan0) entered forwarding state
Fri Mar 10 20:48:35 2017 kern.info kernel: [    9.151637] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Fri Mar 10 20:48:35 2017 daemon.notice netifd: Network device 'wlan0' link is up
Fri Mar 10 20:48:36 2017 kern.notice kernel: [   10.705067] random: nonblocking pool is initialized
Fri Mar 10 20:48:37 2017 daemon.notice netifd: Network device 'eth1' link is up
Fri Mar 10 20:48:37 2017 daemon.notice netifd: Interface 'wan' has link connectivity 
Fri Mar 10 20:48:37 2017 daemon.notice netifd: Interface 'wan' is setting up now
Fri Mar 10 20:48:37 2017 daemon.notice netifd: wan (2672): udhcpc: started, v1.25.1
Fri Mar 10 20:48:37 2017 kern.info kernel: [   10.818035] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Fri Mar 10 20:48:37 2017 kern.info kernel: [   10.818682] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Fri Mar 10 20:48:37 2017 daemon.notice netifd: wan (2672): udhcpc: sending discover
Fri Mar 10 20:48:37 2017 kern.info kernel: [   11.146930] br-lan: port 2(wlan0) entered forwarding state
Fri Mar 10 20:48:40 2017 daemon.info dnsmasq[2746]: started, version 2.76 cachesize 150
Fri Mar 10 20:48:40 2017 daemon.info dnsmasq[2746]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-

auth no-DNSSEC no-ID loop-detect inotify
Fri Mar 10 20:48:40 2017 daemon.info dnsmasq[2746]: DNS service limited to local subnets
Fri Mar 10 20:48:40 2017 daemon.info dnsmasq-dhcp[2746]: DHCP, static leases only on 192.168.1.100, lease time 1d
Fri Mar 10 20:48:40 2017 daemon.info dnsmasq[2746]: using local addresses only for domain lan
Fri Mar 10 20:48:40 2017 daemon.warn dnsmasq[2746]: no servers found in /tmp/resolv.conf.auto, will retry
Fri Mar 10 20:48:40 2017 daemon.info dnsmasq[2746]: read /etc/hosts - 4 addresses
Fri Mar 10 20:48:40 2017 daemon.info dnsmasq[2746]: read /tmp/hosts/dhcp.cfg02411c - 1 addresses
Fri Mar 10 20:48:40 2017 daemon.info dnsmasq-dhcp[2746]: read /etc/ethers - 0 addresses
Fri Mar 10 20:48:40 2017 daemon.notice netifd: wan (2672): udhcpc: sending discover
Fri Mar 10 20:48:40 2017 daemon.notice netifd: wan (2672): udhcpc: sending select for 192.168.0.10
Fri Mar 10 20:48:41 2017 daemon.notice netifd: wan (2672): udhcpc: lease of 192.168.0.10 obtained, lease time 86400
Fri Mar 10 20:48:41 2017 daemon.notice netifd: Interface 'wan' is now up
Fri Mar 10 20:48:41 2017 daemon.info dnsmasq[2746]: reading /tmp/resolv.conf.auto
Fri Mar 10 20:48:41 2017 daemon.info dnsmasq[2746]: using local addresses only for domain lan
Fri Mar 10 20:48:41 2017 daemon.info dnsmasq[2746]: using nameserver 62.179.1.61#53
Fri Mar 10 20:48:41 2017 daemon.info dnsmasq[2746]: using nameserver 62.179.1.63#53
Fri Mar 10 20:48:41 2017 user.notice firewall: Reloading firewall due to ifup of wan (eth1)
Fri Mar 10 20:48:41 2017 user.notice ddns-scripts[2847]: myddns_ipv4: PID '2847' started at 2017-03-10 20:48
Fri Mar 10 20:48:41 2017 user.warn ddns-scripts[2847]: myddns_ipv4: Service section disabled! - TERMINATE
Fri Mar 10 20:48:41 2017 user.warn ddns-scripts[2847]: myddns_ipv4: PID '2847' exit WITH ERROR '1' at 2017-03-10 20:48
Fri Mar 10 20:48:43 2017 daemon.info dnsmasq[2746]: exiting on receipt of SIGTERM
Fri Mar 10 20:48:43 2017 daemon.info dnsmasq[2983]: started, version 2.76 cachesize 150
Fri Mar 10 20:48:43 2017 daemon.info dnsmasq[2983]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-

auth no-DNSSEC no-ID loop-detect inotify
Fri Mar 10 20:48:43 2017 daemon.info dnsmasq[2983]: DNS service limited to local subnets
Fri Mar 10 20:48:43 2017 daemon.info dnsmasq-dhcp[2983]: DHCP, static leases only on 192.168.1.100, lease time 1d
Fri Mar 10 20:48:43 2017 daemon.info dnsmasq[2983]: using local addresses only for domain lan
Fri Mar 10 20:48:43 2017 daemon.info dnsmasq[2983]: reading /tmp/resolv.conf.auto
Fri Mar 10 20:48:43 2017 daemon.info dnsmasq[2983]: using local addresses only for domain lan
Fri Mar 10 20:48:43 2017 daemon.info dnsmasq[2983]: using nameserver 62.179.1.61#53
Fri Mar 10 20:48:43 2017 daemon.info dnsmasq[2983]: using nameserver 62.179.1.63#53
Fri Mar 10 20:48:43 2017 daemon.info dnsmasq[2983]: read /etc/hosts - 4 addresses
Fri Mar 10 20:48:43 2017 daemon.info dnsmasq[2983]: read /tmp/hosts/dhcp.cfg02411c - 1 addresses
Fri Mar 10 20:48:43 2017 daemon.info dnsmasq-dhcp[2983]: read /etc/ethers - 0 addresses
Fri Mar 10 20:48:45 2017 daemon.info dnsmasq[2983]: read /etc/hosts - 4 addresses
Fri Mar 10 20:48:45 2017 daemon.info dnsmasq[2983]: read /tmp/hosts/dhcp.cfg02411c - 1 addresses
Fri Mar 10 20:48:45 2017 daemon.info dnsmasq-dhcp[2983]: read /etc/ethers - 0 addresses
Fri Mar 10 20:49:02 2017 daemon.info hostapd: wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: authenticated
Fri Mar 10 20:49:02 2017 daemon.info hostapd: wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: associated (aid 1)
Fri Mar 10 20:49:02 2017 daemon.notice hostapd: wlan0: AP-STA-CONNECTED XX:XX:XX:XX:XX:XX
Fri Mar 10 20:49:02 2017 daemon.info hostapd: wlan0: STA XX:XX:XX:XX:XX:XX RADIUS: starting accounting session E64DF472C8D8297B
Fri Mar 10 20:49:02 2017 daemon.info hostapd: wlan0: STA XX:XX:XX:XX:XX:XX WPA: pairwise key handshake completed (RSN)
Fri Mar 10 20:49:02 2017 daemon.info dnsmasq-dhcp[2983]: DHCPREQUEST(br-lan) 192.168.1.105 XX:XX:XX:XX:XX:XX 
Fri Mar 10 20:49:02 2017 daemon.info dnsmasq-dhcp[2983]: DHCPACK(br-lan) 192.168.1.105 XX:XX:XX:XX:XX:XX 5-anet-wifi

Fri Mar 10 20:50:36 2017 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Fri Mar 10 20:50:36 2017 kern.info kernel: [  130.227978] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Fri Mar 10 20:50:36 2017 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE
Fri Mar 10 20:50:36 2017 daemon.err hostapd: Using interface wlan1 with hwaddr XX:XX:XX:XX:XX:XX and ssid "Rp24"
Fri Mar 10 20:50:36 2017 kern.info kernel: [  130.254371] device wlan1 entered promiscuous mode
Fri Mar 10 20:50:36 2017 kern.info kernel: [  130.332689] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Fri Mar 10 20:50:36 2017 kern.info kernel: [  130.332950] br-lan: port 3(wlan1) entered forwarding state
Fri Mar 10 20:50:36 2017 kern.info kernel: [  130.333167] br-lan: port 3(wlan1) entered forwarding state
Fri Mar 10 20:50:36 2017 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->ENABLED
Fri Mar 10 20:50:36 2017 daemon.notice hostapd: wlan1: AP-ENABLED 
Fri Mar 10 20:50:36 2017 daemon.notice netifd: Network device 'wlan1' link is up
Fri Mar 10 20:50:38 2017 kern.info kernel: [  132.331787] br-lan: port 3(wlan1) entered forwarding state
Fri Mar 10 20:58:35 2017 daemon.info hostapd: wlan0: STA XX:XX:XX:XX:XX:XX WPA: group key handshake completed (RSN)

Intel DQ77KB + Celeron G1620 + WLE900VX (Luci Obsy 19.07) + UPC300
R6220 (Luci Obsy 19.07) + E3272S-153 ndis

Cezary · 2017-03-10 21:40:01

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,862

Odp: Testuję pasmo 5GHz

Teraz on twierdzi ze uruchomił obie.

cat /var/run/hostapd-phy0.conf jak już.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

pacuro · 2017-03-10 22:36:45

pacuro
Użytkownik
Nieaktywny

Zarejestrowany: 2015-01-12
Posty: 105

Odp: Testuję pasmo 5GHz

Zaczałem wątpić w jakość pigtaili i wyciągnąłem antenkę 2,4 ze starego laptopa. Bez zmian - sieć nie wykrywana w eterze...

root@RobP:~# cat /var/run/hostapd-phy0.conf
driver=nl80211
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
country_code=PL
ieee80211d=1
ieee80211h=1
hw_mode=a
channel=44

noscan=1
ieee80211n=1
ht_coex=0
ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40]

interface=wlan0
ctrl_interface=/var/run/hostapd
ap_isolate=1
disassoc_low_ack=1
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
wpa_passphrase=********
auth_algs=1
wpa=2
wpa_pairwise=CCMP
ssid=Rp50
bridge=br-lan
wpa_key_mgmt=WPA-PSK
okc=0
disable_pmksa_caching=1
ieee80211w=0
bssid=XX:XX:XX:XX:XX:XX

-------------------------------

root@RobP:~# cat /var/run/hostapd-phy1.conf
driver=nl80211
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
country_code=PL
ieee80211d=1
hw_mode=g
channel=1

noscan=1
ieee80211n=1
ht_coex=0
ht_capab=[LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40]

interface=wlan1
ctrl_interface=/var/run/hostapd
ap_isolate=1
disassoc_low_ack=1
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
wpa_passphrase=********
auth_algs=1
wpa=2
wpa_pairwise=CCMP
ssid=Rp24
bridge=br-lan
wpa_key_mgmt=WPA-PSK
okc=0
disable_pmksa_caching=1
ieee80211w=0
bssid=XX:XX:XX:XX:XX:XX

Intel DQ77KB + Celeron G1620 + WLE900VX (Luci Obsy 19.07) + UPC300
R6220 (Luci Obsy 19.07) + E3272S-153 ndis

pacuro · 2017-03-10 22:48:21

pacuro
Użytkownik
Nieaktywny

Zarejestrowany: 2015-01-12
Posty: 105

Odp: Testuję pasmo 5GHz

Teraz zauważyłem: gdy podniosę tą nierozgłaszającą kartę, to avg load od razu wskakuje na ~1,00. Gdy ją wyłączam, to od razu wraca do ~0,00.

Mem: 46968K used, 820280K free, 1428K shrd, 2364K buff, 15540K cached
CPU:   0% usr  98% sys   0% nic   0% idle   0% io   0% irq   0% sirq
Load average: 0.78 0.27 0.27 4/66 18083
  PID  PPID USER     STAT   VSZ %VSZ %CPU COMMAND
 9630     2 root     RW       0   0%  98% [kworker/u2:3]
 1799     1 root     S    15516   2%   0% /sbin/netifd
    1     0 root     S    13364   2%   0% /sbin/procd
 1826     1 root     S    11204   1%   0% /usr/sbin/odhcpd
17276     1 root     S     9720   1%   0% /usr/sbin/hostapd -s -P /var/run/wifi
16523  1972 root     S     3004   0%   0% /usr/sbin/dropbear -F -P /var/run/dro
    3     2 root     RW       0   0%   0% [ksoftirqd/0]
 2095     1 root     S    23920   3%   0% /usr/sbin/uhttpd -f -h /www -r RobP -
 1754     1 root     S    13232   2%   0% /sbin/rpcd
 2425     1 root     S     9740   1%   0% /usr/sbin/hostapd -s -P /var/run/wifi
 1432     1 root     S     8988   1%   0% /sbin/ubusd
 1745     1 root     S     7104   1%   0% /sbin/logd -S 128
 2176     1 root     S     4932   1%   0% /usr/sbin/nmbd -F
 2175     1 root     S     4896   1%   0% /usr/sbin/smbd -F
16790 16619 root     R     3068   0%   0% top
 1903     1 root     S     3064   0%   0% /usr/sbin/crond -f -c /etc/crontabs -
16619 16523 root     S     3064   0%   0% -ash
 2268     1 root     S <   3060   0%   0% /usr/sbin/ntpd -n -N -S /usr/sbin/ntp
 2716  1799 root     S     3060   0%   0% udhcpc -p /var/run/udhcpc-eth1.pid -s
 3026     1 dnsmasq  S     2944   0%   0% /usr/sbin/dnsmasq -C /var/etc/dnsmasq
16523  1972 root     S     3004   0%   0% /usr/sbin/dropbear -F -P /var/run/dro
 1972     1 root     S     2888   0%   0% /usr/sbin/dropbear -F -P /var/run/dro

Intel DQ77KB + Celeron G1620 + WLE900VX (Luci Obsy 19.07) + UPC300
R6220 (Luci Obsy 19.07) + E3272S-153 ndis

pacuro · 2017-03-14 20:44:11

pacuro
Użytkownik
Nieaktywny

Zarejestrowany: 2015-01-12
Posty: 105

Odp: Testuję pasmo 5GHz

Testuję kolejną kartę na chipie AR9380. Jednak ma słabsze radio niż pełnowymiarowa TP-WDN4800. Na plus to że działa z nią razem i obie rozgłaszają sieci. Muszę jeszcze zrobić test AR5BXB112 z AR5B125
Azurwave AR5BXB112 iw phy0 info:

root@RobP:~# iw phy0 info
Wiphy phy0
        max # scan SSIDs: 4
        max scan IEs length: 2257 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Device supports AP-side u-APSD.
        Device supports T-DLS.
        Available Antennas: TX 0x7 RX 0x7
        Configured Antennas: TX 0x7 RX 0x7
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * AP/VLAN
                 * monitor
                 * mesh point
                 * P2P-client
                 * P2P-GO
                 * outside context of a BSS
        Band 1:
                Capabilities: 0x11ef
                        RX LDPC
                        HT20/HT40
                        SM Power Save disabled
                        RX HT20 SGI
                        RX HT40 SGI
                        TX STBC
                        RX STBC 1-stream
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 8 usec (0x06)
                HT TX/RX MCS rate indexes supported: 0-23
                Frequencies:
                        * 2412 MHz [1] (15.0 dBm)
                        * 2417 MHz [2] (15.0 dBm)
                        * 2422 MHz [3] (15.0 dBm)
                        * 2427 MHz [4] (15.0 dBm)
                        * 2432 MHz [5] (15.0 dBm)
                        * 2437 MHz [6] (15.0 dBm)
                        * 2442 MHz [7] (15.0 dBm)
                        * 2447 MHz [8] (15.0 dBm)
                        * 2452 MHz [9] (15.0 dBm)
                        * 2457 MHz [10] (15.0 dBm)
                        * 2462 MHz [11] (15.0 dBm)
                        * 2467 MHz [12] (disabled)
                        * 2472 MHz [13] (disabled)
                        * 2484 MHz [14] (disabled)
        Band 2:
                Capabilities: 0x11ef
                        RX LDPC
                        HT20/HT40
                        SM Power Save disabled
                        RX HT20 SGI
                        RX HT40 SGI
                        TX STBC
                        RX STBC 1-stream
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 8 usec (0x06)
                HT TX/RX MCS rate indexes supported: 0-23
                Frequencies:
                        * 5180 MHz [36] (15.0 dBm)
                        * 5200 MHz [40] (15.0 dBm)
                        * 5220 MHz [44] (15.0 dBm)
                        * 5240 MHz [48] (15.0 dBm)
                        * 5260 MHz [52] (16.0 dBm) (radar detection)
                        * 5280 MHz [56] (16.0 dBm) (radar detection)
                        * 5300 MHz [60] (16.0 dBm) (radar detection)
                        * 5320 MHz [64] (16.0 dBm) (radar detection)
                        * 5500 MHz [100] (17.0 dBm) (radar detection)
                        * 5520 MHz [104] (17.0 dBm) (radar detection)
                        * 5540 MHz [108] (18.0 dBm) (radar detection)
                        * 5560 MHz [112] (18.0 dBm) (radar detection)
                        * 5580 MHz [116] (18.0 dBm) (radar detection)
                        * 5600 MHz [120] (18.0 dBm) (radar detection)
                        * 5620 MHz [124] (18.0 dBm) (radar detection)
                        * 5640 MHz [128] (18.0 dBm) (radar detection)
                        * 5660 MHz [132] (18.0 dBm) (radar detection)
                        * 5680 MHz [136] (18.0 dBm) (radar detection)
                        * 5700 MHz [140] (18.0 dBm) (radar detection)
                        * 5745 MHz [149] (20.0 dBm)
                        * 5765 MHz [153] (20.0 dBm)
                        * 5785 MHz [157] (20.0 dBm)
                        * 5805 MHz [161] (20.0 dBm)
                        * 5825 MHz [165] (20.0 dBm)
        valid interface combinations:
                 * #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1, #{ IBSS } <= 1,
                   total <= 2048, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz }

        HT Capability overrides:
                 * MCS: ff ff ff ff ff ff ff ff ff ff
                 * maximum A-MSDU length
                 * supported channel width
                 * short GI for 40 MHz
                 * max A-MPDU length exponent
                 * min MPDU start spacing

Intel DQ77KB + Celeron G1620 + WLE900VX (Luci Obsy 19.07) + UPC300
R6220 (Luci Obsy 19.07) + E3272S-153 ndis

pacuro · 2018-04-16 08:16:15

pacuro
Użytkownik
Nieaktywny

Zarejestrowany: 2015-01-12
Posty: 105

Odp: Testuję pasmo 5GHz

Przy okazji upgrade rutera o kartę wifi Compex WLE900VE okazuje się, że sytuacja gdzie nie podnoszą się dwa interfejsy przy starcie nadal istnieje.
- mini pci-e full size + mini pci-e half size = no go
- mini pci-e full size + usb = no go
- mini pci-e full size + pci-e = działa (do tej pory cały czas pracowałem w takiej konfiguracji bo inaczej się nie dało)

Cezary widzę, że to jest ciągle istniejący problem w openwrt/lede:
https://dev.openwrt.org/ticket/8248
https://forum.openwrt.org/viewtopic.php?id=72654
https://forum.lede-project.org/t/wifi-d … esent/6916

Nie ma na to żadnego rozwiązania?

Intel DQ77KB + Celeron G1620 + WLE900VX (Luci Obsy 19.07) + UPC300
R6220 (Luci Obsy 19.07) + E3272S-153 ndis

Cezary · 2018-04-16 08:31:54

Cezary
...
Nieaktywny

Skąd: Warszawa
Zarejestrowany: 2006-02-25
Posty: 115,862

Odp: Testuję pasmo 5GHz

Ten z openwrt był stary, ten z forum lede jest o tym że w ogóle radia nie nie znalazł więc go nie uruchom. Być może po prostu karta wymaga więcej czasu na inicjację.

Napisz jakie TY masz teraz problemy, bo te stare linki nic nie wnoszą do wypowiedzi.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

pacuro · 2018-04-16 18:00:12

pacuro
Użytkownik
Nieaktywny

Zarejestrowany: 2015-01-12
Posty: 105

Odp: Testuję pasmo 5GHz

Ok. Od początku.
Ruter z jedną kartą wifi (mini pci-e) podnosi ten interfejs poprawnie i nadaje.
Po dołożeniu drugiej karty (w poniższym przypadku usb) nie podnosi żadnego z dwóch interfejsów.
Podniesienie ich z ręki włącza je poprawnie. Jednak to nie może być tak, że po każdym restarcie muszę się logować przez putty żeby włączyć wifi.

config wifi-device 'radio0'
    option type 'mac80211'
    option hwmode '11a'
    option path 'pci0000:00/0000:00:1c.0/0000:01:00.0'
    option country 'PL'
    option channel '44'
    option htmode 'HT40'
    option txpower '20'

config wifi-iface 'default_radio0'
    option device 'radio0'
    option network 'lan'
    option mode 'ap'
    option ssid 'Rp50'
    option encryption 'psk2+ccmp'
    option key 'password'

config wifi-device 'radio1'
    option type 'mac80211'
    option hwmode '11g'
    option path 'pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0'
    option country 'PL'
    option channel '1'
    option txpower '20'

config wifi-iface 'default_radio1'
    option device 'radio1'
    option network 'lan'
    option mode 'ap'
    option ssid 'Rp'
    option encryption 'psk2+ccmp'
    option key 'password'

Mon Apr 16 18:35:05 2018 kern.notice kernel: [    0.000000] Linux version 4.4.112 (cezary@eko.one.pl) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3784-ebb5474) ) #0 SMP Fri Feb 9 08:22:45 2018
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=2d175502-02 rootfstype=ext4 rootwait console=tty0 console=ttyS0,115200n8 noinitrd
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] x86/fpu: Using 'eager' FPU context switches.
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] e820: BIOS-provided physical RAM map:
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000039db2fff] usable
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x0000000039db3000-0x000000003a231fff] reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x000000003a232000-0x000000003a241fff] ACPI data
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x000000003a242000-0x000000003a361fff] ACPI NVS
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x000000003a362000-0x000000003a67cfff] reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x000000003a67d000-0x000000003a67dfff] usable
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x000000003a67e000-0x000000003a6c0fff] ACPI NVS
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x000000003a6c1000-0x000000003affffff] usable
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x000000003b800000-0x000000003d9fffff] reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] NX (Execute Disable) protection: active
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] SMBIOS 2.7 present.
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] DMI: Intel DQ77KB/DQ77KB, BIOS KBQ7710H.86A.0059.2017.0526.1645 05/26/2017
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] e820: last_pfn = 0x100600 max_arch_pfn = 0x400000000
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] MTRR default type: uncachable
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] MTRR fixed ranges enabled:
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   00000-9FFFF write-back
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   A0000-BFFFF uncachable
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   C0000-D3FFF write-protect
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   D4000-E7FFF uncachable
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   E8000-FFFFF write-protect
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] MTRR variable ranges enabled:
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   0 base 000000000 mask F00000000 write-back
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   1 base 100000000 mask FFFC00000 write-back
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   2 base 100400000 mask FFFE00000 write-back
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   3 base 080000000 mask F80000000 uncachable
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   4 base 040000000 mask FC0000000 uncachable
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   5 base 03C000000 mask FFC000000 uncachable
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   6 base 03B800000 mask FFF800000 uncachable
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   7 disabled
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   8 disabled
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   9 disabled
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] e820: update [mem 0x3b800000-0xffffffff] usable ==> reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] e820: last_pfn = 0x3b000 max_arch_pfn = 0x400000000
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] found SMP MP-table at [mem 0x000fd810-0x000fd81f] mapped at [ffff8800000fd810]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 28672
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] BRK [0x018cf000, 0x018cffff] PGTABLE
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] BRK [0x018d0000, 0x018d0fff] PGTABLE
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] BRK [0x018d1000, 0x018d1fff] PGTABLE
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] BRK [0x018d2000, 0x018d2fff] PGTABLE
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] BRK [0x018d3000, 0x018d3fff] PGTABLE
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] BRK [0x018d4000, 0x018d4fff] PGTABLE
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] ACPI: Early table checksum verification disabled
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 INTEL )
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.000000] ACPI: XSDT 0x000000003A235078 000074 (v01 INTEL  DQ77KB   0000003B AMI  00010013)
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.000000] ACPI: FACP 0x000000003A23F4D8 00010C (v05 INTEL  DQ77KB   0000003B AMI  00010013)
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.000000] ACPI: DSDT 0x000000003A235180 00A351 (v02 INTEL  DQ77KB   0000003B INTL 20051117)
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.000000] ACPI: FACS 0x000000003A360080 000040
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.000000] ACPI: APIC 0x000000003A23F5E8 00005A (v03 INTEL  DQ77KB   0000003B AMI  00010013)
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.000000] ACPI: FPDT 0x000000003A23F648 000044 (v01 INTEL  DQ77KB   0000003B AMI  00010013)
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.000000] ACPI: MCFG 0x000000003A23F690 00003C (v01 INTEL  DQ77KB   0000003B MSFT 00000097)
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.000000] ACPI: HPET 0x000000003A23F6D0 000038 (v01 INTEL  DQ77KB   0000003B AMI. 00000005)
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.000000] ACPI: SSDT 0x000000003A23F708 00036D (v01 INTEL  DQ77KB   0000003B INTL 20091112)
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.000000] ACPI: SSDT 0x000000003A23FA78 0008A2 (v01 INTEL  DQ77KB   0000003B INTL 20051117)
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.000000] ACPI: SSDT 0x000000003A240320 00083B (v01 INTEL  DQ77KB   0000003B INTL 20051117)
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.000000] ACPI: SSDT 0x000000003A240B60 000B22 (v01 INTEL  DQ77KB   0000003B INTL 20051117)
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.000000] ACPI: ASF! 0x000000003A241688 0000A5 (v32 INTEL  DQ77KB   0000003B TFSM 000F4240)
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] Zone ranges:
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000100000000-0x00000001005fffff]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] Movable zone start for each node
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] Early memory node ranges
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000020200000-0x0000000039db2fff]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000]   node   0: [mem 0x000000003a67d000-0x000000003a67dfff]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000]   node   0: [mem 0x000000003a6c1000-0x000000003affffff]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000100000000-0x00000001005fffff]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001005fffff]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] On node 0 totalpages: 240272
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   DMA zone: 64 pages used for memmap
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   DMA zone: 22 pages reserved
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   DMA zone: 3997 pages, LIFO batch:0
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   DMA32 zone: 3668 pages used for memmap
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   DMA32 zone: 234739 pages, LIFO batch:31
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   Normal zone: 24 pages used for memmap
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000]   Normal zone: 1536 pages, LIFO batch:0
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] Reserving Intel graphics stolen memory at 0x3ba00000-0x3d9fffff
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] ACPI: IRQ0 used by override.
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] ACPI: IRQ9 used by override.
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] e820: [mem 0x3da00000-0xf7ffffff] available for PCI devices
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] PERCPU: Embedded 32 pages/cpu @ffff880100200000 s91544 r8192 d31336 u2097152
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] pcpu-alloc: s91544 r8192 d31336 u2097152 alloc=1*2097152
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 236494
Mon Apr 16 18:35:05 2018 kern.notice kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=2d175502-02 rootfstype=ext4 rootwait console=tty0 console=ttyS0,115200n8 noinitrd
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] Memory: 865756K/961088K available (5087K kernel code, 496K rwdata, 1912K rodata, 936K init, 548K bss, 95332K reserved, 0K cma-reserved)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] Kernel/User page tables isolation: enabled
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] Hierarchical RCU implementation.
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000]     CONFIG_RCU_FANOUT set to non-default value of 32
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000]     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] NR_IRQS:4352 nr_irqs:256 16
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] Console: colour VGA+ 80x25
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] console [tty0] enabled
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] console [ttyS0] enabled
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.000000] hpet clockevent registered
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] tsc: Fast TSC calibration using PIT
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000000] tsc: Detected 2693.927 MHz processor
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.85 BogoMIPS (lpj=26939270)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000404] pid_max: default: 32768 minimum: 301
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.000590] ACPI: Core revision 20150930
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.006191] ACPI: 5 ACPI AML tables successfully acquired and loaded
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.006527] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.006772] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.007141] CPU: Physical Processor ID: 0
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.007314] CPU: Processor Core ID: 0
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.007478] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.007695] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.007935] mce: CPU supports 7 MCE banks
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.008115] CPU0: Thermal monitoring enabled (TM1)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.008306] process: using mwait in idle threads
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.008492] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.008694] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.013781] Freeing SMP alternatives memory: 20K
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.017008] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.117234] TSC deadline timer enabled
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.117237] smpboot: CPU0: Intel(R) Celeron(R) CPU G1620 @ 2.70GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.117720] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.118315] ... version:                3
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.118485] ... bit width:              48
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.118654] ... generic registers:      8
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.118824] ... value mask:             0000ffffffffffff
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.119026] ... max period:             00007fffffffffff
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.119226] ... fixed-purpose events:   3
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.119397] ... event mask:             00000007000000ff
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.119703] x86: Booted up 1 node, 1 CPUs
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.119877] smpboot: Total of 1 processors activated (5387.85 BogoMIPS)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.120799] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.121139] futex hash table entries: 256 (order: 2, 16384 bytes)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.121498] NET: Registered protocol family 16
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.121772] cpuidle: using governor ladder
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.121988] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.122271] ACPI: bus type PCI registered
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.122438] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.122697] PCI: Using configuration type 1 for base access
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.122951] perf_event_intel: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.125031] ACPI: Added _OSI(Module Device)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.125210] ACPI: Added _OSI(Processor Device)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.125388] ACPI: Added _OSI(3.0 _SCP Extensions)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.125573] ACPI: Added _OSI(Processor Aggregator Device)
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.127444] ACPI: Executed 1 blocks of module-level executable AML code
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.130032] ACPI: Interpreter enabled
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.130200] ACPI: (supports S0 S5)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.130351] ACPI: Using IOAPIC for interrupt routing
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.130563] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.135594] ACPI: Power Resource [FN00] (off)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.135833] ACPI: Power Resource [FN01] (off)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.136066] ACPI: Power Resource [FN02] (off)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.136301] ACPI: Power Resource [FN03] (off)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.136534] ACPI: Power Resource [FN04] (off)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.137077] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.137311] acpi PNP0A08:00: _OSC: OS supports [Segments MSI]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.137651] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.138271] PCI host bridge to bus 0000:00
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.138447] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.138680] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.138913] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.139192] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.139470] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.139748] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.140024] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.140909] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.141184] pci_bus 0000:00: root bus resource [mem 0x3da00000-0xfeafffff window]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.141462] pci_bus 0000:00: root bus resource [bus 00-3e]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.141671] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.141743] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.141754] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.141759] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.141763] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.141846] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.141875] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.141932] pci 0000:00:14.0: PME# supported from D3hot D3cold
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.141972] pci 0000:00:14.0: System wakeup disabled by ACPI
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.142214] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.142245] pci 0000:00:16.0: reg 0x10: [mem 0xf7c37000-0xf7c3700f 64bit]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.142306] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.142368] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.142394] pci 0000:00:16.3: reg 0x10: [io  0xf080-0xf087]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.142402] pci 0000:00:16.3: reg 0x14: [mem 0xf7c35000-0xf7c35fff]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.142516] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.142539] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.142547] pci 0000:00:19.0: reg 0x14: [mem 0xf7c34000-0xf7c34fff]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.142555] pci 0000:00:19.0: reg 0x18: [io  0xf060-0xf07f]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.142603] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.142637] pci 0000:00:19.0: System wakeup disabled by ACPI
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.142876] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.142903] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c33000-0xf7c333ff]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.142972] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.143020] pci 0000:00:1a.0: System wakeup disabled by ACPI
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.143259] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.143333] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.143369] pci 0000:00:1c.0: System wakeup disabled by ACPI
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.143620] pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.143734] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.143775] pci 0000:00:1c.6: System wakeup disabled by ACPI
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.144019] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.144046] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c32000-0xf7c323ff]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.144116] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.144160] pci 0000:00:1d.0: System wakeup disabled by ACPI
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.144397] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.144470] pci 0000:00:1e.0: System wakeup disabled by ACPI
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.144708] pci 0000:00:1f.0: [8086:1e47] type 00 class 0x060100
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.144859] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.144875] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c31000-0xf7c310ff 64bit]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.144895] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.145034] pci 0000:01:00.0: [168c:003c] type 00 class 0x028000
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.145094] pci 0000:01:00.0: reg 0x10: [mem 0xf7800000-0xf79fffff 64bit]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.145177] pci 0000:01:00.0: reg 0x30: [mem 0xf7a00000-0xf7a0ffff pref]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.145248] pci 0000:01:00.0: supports D1 D2
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.145268] pci 0000:01:00.0: System wakeup disabled by ACPI
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.145499] pci 0000:00:1c.0: PCI bridge to [bus 01]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.145699] pci 0000:00:1c.0:   bridge window [mem 0xf7800000-0xf7afffff]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.145861] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.145935] pci 0000:02:00.0: reg 0x10: [mem 0xf7b00000-0xf7b1ffff]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.145981] pci 0000:02:00.0: reg 0x18: [io  0xe000-0xe01f]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.146005] pci 0000:02:00.0: reg 0x1c: [mem 0xf7b20000-0xf7b23fff]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.146164] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.146198] pci 0000:02:00.0: System wakeup disabled by ACPI
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.146421] pci 0000:00:1c.6: PCI bridge to [bus 02]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.146612] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.146616] pci 0000:00:1c.6:   bridge window [mem 0xf7b00000-0xf7bfffff]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.146679] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.146916] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.146918] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.146919] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.146920] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.146922] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.146923] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.146924] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.146926] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.146927] pci 0000:00:1e.0:   bridge window [mem 0x3da00000-0xfeafffff window] (subtractive decode)
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.146944] pci_bus 0000:00: on NUMA node 0
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.147347] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.148116] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.149016] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.149779] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.150546] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.151314] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.152236] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.153157] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.154052] ACPI: Enabled 7 GPEs in block 00 to 3F
Mon Apr 16 18:35:05 2018 kern.notice kernel: [    0.154435] SCSI subsystem initialized
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.155759] libata version 3.00 loaded.
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.155769] ACPI: bus type USB registered
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.155958] usbcore: registered new interface driver usbfs
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.156169] usbcore: registered new interface driver hub
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.156378] usbcore: registered new device driver usb
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.156617] PCI: Using ACPI for IRQ routing
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.156792] PCI: pci_cache_line_size set to 64 bytes
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.156909] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.156911] e820: reserve RAM buffer [mem 0x39db3000-0x3bffffff]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.156913] e820: reserve RAM buffer [mem 0x3a67e000-0x3bffffff]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.156914] e820: reserve RAM buffer [mem 0x3b000000-0x3bffffff]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.156915] e820: reserve RAM buffer [mem 0x100600000-0x103ffffff]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.157054] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.157691] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Mon Apr 16 18:35:05 2018 kern.notice kernel: [    0.159909] amd_nb: Cannot enumerate AMD northbridges
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.160274] clocksource: Switched to clocksource hpet
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.160537] pnp: PnP ACPI init
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.160749] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.160978] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.161036] system 00:01: [io  0x0680-0x069f] has been reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.161249] system 00:01: [io  0x1100-0x110f] has been reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.161463] system 00:01: [io  0xffff] has been reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.161662] system 00:01: [io  0xffff] has been reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.161863] system 00:01: [io  0x0400-0x0453] could not be reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.162085] system 00:01: [io  0x0458-0x047f] has been reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.162300] system 00:01: [io  0x0500-0x057f] has been reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.162515] system 00:01: [io  0x164e-0x164f] has been reserved
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.162730] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.162748] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.162780] system 00:03: [io  0x0454-0x0457] has been reserved
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.162996] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.163069] system 00:04: [io  0x0a30-0x0a4f] has been reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.163284] system 00:04: [io  0x0a00-0x0a0f] has been reserved
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.163500] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.163551] system 00:05: [io  0x04d0-0x04d1] has been reserved
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.163770] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.164020] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.164255] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.164486] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.164717] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.164948] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.165176] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.165406] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.165636] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.165867] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.166098] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.166338] system 00:06: [mem 0x3da00000-0x3da00fff] has been reserved
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.166571] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.166700] system 00:07: [mem 0x20000000-0x201fffff] has been reserved
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.166933] system 00:07: [mem 0x40004000-0x40004fff] has been reserved
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.167162] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.167176] pnp: PnP ACPI: found 8 devices
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.172483] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.172826] pci 0000:00:1c.0: PCI bridge to [bus 01]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.173023] pci 0000:00:1c.0:   bridge window [mem 0xf7800000-0xf7afffff]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.173264] pci 0000:00:1c.6: PCI bridge to [bus 02]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.173458] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.173678] pci 0000:00:1c.6:   bridge window [mem 0xf7b00000-0xf7bfffff]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.173924] pci 0000:00:1e.0: PCI bridge to [bus 03]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.174126] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.174127] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.174129] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.174130] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.174131] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.174133] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.174134] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.174135] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff window]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.174137] pci_bus 0000:00: resource 12 [mem 0x3da00000-0xfeafffff window]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.174138] pci_bus 0000:01: resource 1 [mem 0xf7800000-0xf7afffff]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.174140] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.174141] pci_bus 0000:02: resource 1 [mem 0xf7b00000-0xf7bfffff]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.174143] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.174144] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.174146] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.174147] pci_bus 0000:03: resource 7 [mem 0x000d4000-0x000d7fff window]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.174148] pci_bus 0000:03: resource 8 [mem 0x000d8000-0x000dbfff window]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.174150] pci_bus 0000:03: resource 9 [mem 0x000dc000-0x000dffff window]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.174151] pci_bus 0000:03: resource 10 [mem 0x000e0000-0x000e3fff window]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.174152] pci_bus 0000:03: resource 11 [mem 0x000e4000-0x000e7fff window]
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.174154] pci_bus 0000:03: resource 12 [mem 0x3da00000-0xfeafffff window]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.174177] NET: Registered protocol family 2
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.174441] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.174690] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.174945] TCP: Hash tables configured (established 8192 bind 8192)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.175185] UDP hash table entries: 512 (order: 2, 16384 bytes)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.175407] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.175658] NET: Registered protocol family 1
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.175853] pmd_set_huge: Cannot satisfy [mem 0xf7400000-0xf7600000] with a huge-page mapping due to MTRR override.
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.176209] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.176498] pci 0000:00:02.0: Video device with shadowed ROM
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.220215] PCI: CLS mismatch (64 != 32), using 64 bytes
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.220259] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.220489] software IO TLB [mem 0x34bb3000-0x38bb3000] (64MB) mapped at [ffff880034bb3000-ffff880038bb2fff]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.220864] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.221173] hw unit of domain pp0-core 2^-16 Joules
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.221364] hw unit of domain package 2^-16 Joules
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.221552] hw unit of domain pp1-gpu 2^-16 Joules
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.223677] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.224262] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.224545] io scheduler noop registered
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.224713] io scheduler deadline registered (default)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.225188] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.225412] hv_vmbus: registering driver hyperv_fb
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.225604] intel_idle: MWAIT substates: 0x1120
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.225605] intel_idle: v0.4.1 model 0x3A
Mon Apr 16 18:35:05 2018 kern.debug kernel: [    0.225606] intel_idle: lapic_timer_reliable_states 0xffffffff
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.225689] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.225992] ACPI: Power Button [PWRB]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.226178] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.226457] ACPI: Power Button [PWRF]
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.227229] thermal LNXTHERM:00: registered as thermal_zone0
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.227443] ACPI: Thermal Zone [TZ00] (28 C)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.227755] thermal LNXTHERM:01: registered as thermal_zone1
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.227964] ACPI: Thermal Zone [TZ01] (30 C)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.228170] xenfs: not registering filesystem on non-xen platform
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.228422] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.249476] 0000:00:16.3: ttyS4 at I/O 0xf080 (irq = 19, base_baud = 115200) is a 16550A
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.249911] Non-volatile memory driver v1.3
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.251214] loop: module loaded
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.251393] Guest personality initialized and is inactive
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.251609] VMCI host device registered (name=vmci, major=10, minor=63)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.251843] Initialized host personality
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.252057] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.252647] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.252991] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.253579] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000054F (\_GPE.GPIO) (20150930/utaddress-254)
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.254180] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000054F (\_GPE.GPS0) (20150930/utaddress-254)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.254779] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.255121] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.255710] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000054F (\_GPE.GPIO) (20150930/utaddress-254)
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.256307] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000054F (\_GPE.GPS0) (20150930/utaddress-254)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.256904] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.257246] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.257834] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000054F (\_GPE.GPIO) (20150930/utaddress-254)
Mon Apr 16 18:35:05 2018 kern.warn kernel: [    0.258433] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000054F (\_GPE.GPS0) (20150930/utaddress-254)
Mon Apr 16 18:35:05 2018 kern.info kernel: [    0.259026] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

Intel DQ77KB + Celeron G1620 + WLE900VX (Luci Obsy 19.07) + UPC300
R6220 (Luci Obsy 19.07) + E3272S-153 ndis

FAQ o OpenWrt | Sprzedam różne routery | Oddam

Testuję pasmo 5GHz (Strona 1 z 2)

Posty: 1 do 25 z 33

1 Temat przez pacuro 2017-02-17 23:51:06 (edytowany przez pacuro 2017-03-14 20:10:45)

Temat: Testuję pasmo 5GHz

2 Odpowiedź przez Cezary 2017-02-18 06:47:53

Odp: Testuję pasmo 5GHz

3 Odpowiedź przez pacuro 2017-02-18 09:23:53

Odp: Testuję pasmo 5GHz

4 Odpowiedź przez Cezary 2017-02-18 09:27:37

Odp: Testuję pasmo 5GHz

5 Odpowiedź przez pacuro 2017-03-08 18:33:19

Odp: Testuję pasmo 5GHz

6 Odpowiedź przez Cezary 2017-03-08 19:32:50

Odp: Testuję pasmo 5GHz

7 Odpowiedź przez pacuro 2017-03-09 09:26:14 (edytowany przez pacuro 2017-03-09 09:34:59)

Odp: Testuję pasmo 5GHz

8 Odpowiedź przez Cezary 2017-03-09 09:35:28

Odp: Testuję pasmo 5GHz

9 Odpowiedź przez pacuro 2017-03-09 09:39:20

Odp: Testuję pasmo 5GHz

10 Odpowiedź przez pacuro 2017-03-09 17:31:02

Odp: Testuję pasmo 5GHz

11 Odpowiedź przez Cezary 2017-03-09 22:30:58

Odp: Testuję pasmo 5GHz

12 Odpowiedź przez Cezary 2017-03-09 22:32:15

Odp: Testuję pasmo 5GHz

13 Odpowiedź przez pacuro 2017-03-09 23:16:40

Odp: Testuję pasmo 5GHz

14 Odpowiedź przez Cezary 2017-03-09 23:23:40

Odp: Testuję pasmo 5GHz

15 Odpowiedź przez pacuro 2017-03-10 17:23:22 (edytowany przez pacuro 2017-03-14 20:11:52)

Odp: Testuję pasmo 5GHz

16 Odpowiedź przez Cezary 2017-03-10 17:55:18

Odp: Testuję pasmo 5GHz

17 Odpowiedź przez pacuro 2017-03-10 21:13:44

Odp: Testuję pasmo 5GHz

18 Odpowiedź przez pacuro 2017-03-10 21:14:50

Odp: Testuję pasmo 5GHz

19 Odpowiedź przez Cezary 2017-03-10 21:40:01

Odp: Testuję pasmo 5GHz

20 Odpowiedź przez pacuro 2017-03-10 22:36:45 (edytowany przez pacuro 2017-03-10 22:38:38)

Odp: Testuję pasmo 5GHz

21 Odpowiedź przez pacuro 2017-03-10 22:48:21 (edytowany przez pacuro 2017-03-10 23:09:56)

Odp: Testuję pasmo 5GHz

22 Odpowiedź przez pacuro 2017-03-14 20:44:11 (edytowany przez pacuro 2017-03-14 20:50:09)

Odp: Testuję pasmo 5GHz

23 Odpowiedź przez pacuro 2018-04-16 08:16:15

Odp: Testuję pasmo 5GHz

24 Odpowiedź przez Cezary 2018-04-16 08:31:54 (edytowany przez Cezary 2018-04-16 09:05:57)

Odp: Testuję pasmo 5GHz

25 Odpowiedź przez pacuro 2018-04-16 18:00:12

Odp: Testuję pasmo 5GHz

Posty: 1 do 25 z 33