Nie jesteś zalogowany. Proszę się zalogować lub zarejestrować.
eko.one.pl → Oprogramowanie / Software → problem z pinem na open wrt i E3272
Strony Poprzednia 1 2 3 Następna
Zaloguj się lub zarejestruj by napisać odpowiedź
no zapewne popełniłem błąd, natomiast plik z http://dl.eko.one.pl/chaos_calmer/ar71x … ar71xx.ipk wrzuciłem do tmp przez winSCP. rozumiem że to pakiet wwan. Pytanie tylko jaką komendą to zainstalować...
Jest w w faq. Przeczytałeś?
Jest w w faq. Przeczytałeś?
No przeczytałem a najwyraźniej nie to co trzeba, bo to polecenie # opkg install wwan comgt chat comgt-ncm comgt-directip uqmi umbim usb-modeswitch
nie było potrzebna chyba. Konkretnie to mi się pojawił przy tym poleceniu taki komunikat:
Unknown package 'wwan'.
Package comgt (0.32-25) installed in root is up to date.
Package chat (2.4.7-2) installed in root is up to date.
Installing comgt-ncm (0.32-25) to root...
Installing comgt-directip (0.32-25) to root...
Package uqmi (2014-12-03-86bcdb8cca652676a78b2df8b5e3fb27a40c60a4) installed in root is up to date.
Package umbim (2014-12-10-e195e48623be73d9b6a787d7ede951cb426393a9) installed in root is up to date.
Package usb-modeswitch (2014-07-18-01ecc3b9764d1dd89cf36ede0a2d98f9adb0cd33) installed in root is up to date.
Collected errors:
* opkg_install_cmd: Cannot install package wwan.
* opkg_download_pkg: Package comgt-ncm is not available from any configured src.
* opkg_install_pkg: Failed to download comgt-ncm. Perhaps you need to run 'opkg update'?
* opkg_install_cmd: Cannot install package comgt-ncm.
* opkg_download_pkg: Package comgt-directip is not available from any configured src.
* opkg_install_pkg: Failed to download comgt-directip. Perhaps you need to run 'opkg update'?
* opkg_install_cmd: Cannot install package comgt-directip.
teraz jest to w tmp. Muszę zainstalować w ofline więc ścieżka dostępu będzie inna
poczytam jeszcze o tym
opkg install /tmp/wwan-i-tu-pełna-nazwa tego pliku.
Nie, nie przeczytałeś.
opkg install /tmp/wwan-i-tu-pełna-nazwa tego pliku.
Nie, nie przeczytałeś.
No robiłem tak...
opkg install /tmp/wwan_2014-07-17-1_ar71xx.ipk
odpowiedz:
/19d2:0001
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1199:6880
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/19d2:fffb
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/19d2:0104
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1199:68a2
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/12d1:14c8
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/19d2:0057
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1199:685a
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/19d2:0025
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/19d2:0121
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/16d8:680a
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/0421:062d
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/12d1:1577
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1c9e:9605
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/106c:3718
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1199:0025
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/19d2:0017
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1410:6000
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/07d1:7e11
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1410:2120
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/0f3d:68a2
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/16d8:5141
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/19d2:1512
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/05c6:0016
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/12d1:1c08
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1199:6809
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/413c:8129
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/19d2:0024
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/19d2:1537
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/19d2:1181
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/12d1:1035
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1bbb:0017
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1199:683a
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/19d2:1254
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1410:1410
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/413c:8135
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/16d8:5533
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/0bdb:1910
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/19d2:1218
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/19d2:1519
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/16d8:6006
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/19d2:0326
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1e0e:9000
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1a8d:100d
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1199:0028
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/19d2:1015
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/12d1:14ac
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1c9e:9801
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/16d5:6202
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/19d2:ffe9
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/12d1:151d
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1a8d:1007
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/106c:3717
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/12d1:151b
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/19d2:ffff
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1199:6838
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/12d1:1f16
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/0421:03a7
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/19d2:0037
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/19d2:1217
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/19d2:0066
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1199:6890
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/12d1:1506
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1410:1450
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1a8d:2006
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/16d8:6002
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1e0e:cefe
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1410:b001
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1410:7003
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/19d2:0086
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/16d8:6008
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1410:4100
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1410:1420
But that file is already provided by package * comgt
* check_data_file_clashes: Package wwan wants to install file /lib/network/wwan/1529:3100
But that file is already provided by package * comgt
* opkg_install_cmd: Cannot install package wwan.
tak to wygląda jakby było zainstalowane chyba...
Której wersji openwrt ty używasz?
Której wersji openwrt ty używasz?
OpenWrt Barrier Breaker 14.07 / LuCI 0.12 Branch (0.12+git-54c869a)
Wydanie BB nie posiadało pakietu wwan i nie możesz go używać z aktualnego openwrt bo inne pakiety nie są dostosowane do współpracy z nim. Nic ci po nim.
Wydanie BB nie posiadało pakietu wwan i nie możesz go używać z aktualnego openwrt bo inne pakiety nie są dostosowane do współpracy z nim. Nic ci po nim.
No a jakie mogę zainstalować by korzystać na tym BB z E3272 w wersji modem?
czy może mam zainstalowane tylko muszę skonfigurować. Działało mi na tej wersji bezproblemowo.
No chyba, że powinienem inny openwrt zainstalować. Choć wolał bym ten z nakładką LuCI. Gargoyle mi się nie spisywał...
Po prostu skonfiguruj - pisałem już wcześniej co masz zmienić w luci.
To co masz jest stare - od dawna masz nowe wydanie openwrt z luci.
Po prostu skonfiguruj - pisałem już wcześniej co masz zmienić w luci.
To co masz jest stare - od dawna masz nowe wydanie openwrt z luci.
czyli muszę znaleźć jakiś nowszy soft do luci. Rozumiem, że jak zainstaluję, to tez z pozycji gui będę mógł zrobić ustawienia?
na openwrt znalazłem takie dwa linki do mojego modelu wdr3600
openwrt-15.05-ar71xx-generic-tl-wdr3600-v1-squashfs-factory.bin
i
openwrt-15.05-ar71xx-generic-tl-wdr3600-v1-squashfs-sysupgrade.bin
obydwa z taką samą datą
rozumiem że ten z upgrade powinienem zainstalować?
Nie, to co znalazłeś nie ma gui. W ogóle nie czytasz tego co się pojawia na ekranie. Tu tą obrazy z luci: http://dl.eko.one.pl/luci/chaos_calmer/ar71xx/
Ten z sysupgrade. I na dodatek bez zachowywania zmian.
PS. Jeżeli ten modem masz podłączony do routera to pokaż wynika polecenia
cat /sys/kernel/debug/usb/devices
Nie, to co znalazłeś nie ma gui
I bardzo dobrze, że nie ma. GUI jest dla luserów.
Zamiast
wyklikaj sobie to w LuCi
możesz napisać kilka linijek w stylu
uci set openvpn.myconfig.proto='TCP'
uci commit openvpnI każdy luser robi <kopiuj><wklej>
i gotowe. 
PS. Jeżeli ten modem masz podłączony do routera to pokaż wynika polecenia
cat /sys/kernel/debug/usb/devices
a więc wgrałem nowy OpenWrt Chaos Calmer 15.05.1 r49474 w wersji sysupgrade który poleciłeś. Odznaczyłem opcję zachowaj ustawienia. nowa wersja się zainstalowała i próbowałem skonfigurować interface wwan0 wg zaleceń. Bez skutku
Wynik polecenia cat /sys/kernel/debug/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.18
S: Manufacturer=Linux 3.18.44 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=05e3 ProdID=0608 Rev=85.36
S: Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=1506 Rev= 1.02
S: Manufacturer=HUAWEI Technology
S: Product=HUAWEI Mobile
C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=10 Driver=option
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=12 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I: If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
I:* If#= 2 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cezary napisał/a:Nie, to co znalazłeś nie ma gui
I bardzo dobrze, że nie ma. GUI jest dla luserów.
Zamiastwyklikaj sobie to w LuCi
możesz napisać kilka linijek w stylu
uci set openvpn.myconfig.proto='TCP' uci commit openvpnI każdy luser robi <kopiuj><wklej>
i gotowe.
Wiesz dla kogoś kto jest oblatany w konsoli i poleceniach to ssh wystarczy. Ja nie jestem takim orłem. Wolę mieć gui bo to pozwala mi czasem na łatwiejszą konfigurację pewnych rzeczy. Niektóre robię przez ssh inne przez gui. A już w szczególności gui mam dla tych z którymi dzielę internet a którzy to dostęp do możliwości restartu routera, który czasem jest potrzebny, mają tylko przez wifi...
To teraz pokaż uci show network, zobaczymy co zrobiłeś.
To teraz pokaż uci show network, zobaczymy co zrobiłeś.
skonfigurowałem wwan wg twoich zaleceń, (sieć>interfejsy>wwan> i cała konfiguracja sekcji wan) jednak odrazu powiem że po wgraniu tego aktualnego obrazu LuCI mam widoczny w interfejsach także wwan6. Nie ruszałem tego
oto odpowiedz dla uci show network
network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.globals=globals
network.globals.ula_prefix='fdda:2d6e:18fd::/48'
network.lan=interface
network.lan.ifname='eth0.1'
network.lan.force_link='1'
network.lan.type='bridge'
network.lan.proto='static'
network.lan.ipaddr='192.168.1.1'
network.lan.netmask='255.255.255.0'
network.lan.ip6assign='60'
network.wan=interface
network.wan._orig_ifname='eth0.2'
network.wan._orig_bridge='false'
network.wan.proto='3g'
network.wan.service='umts'
network.wan.apn='internet'
network.wan.username='root'
network.wan.password='chalice666'
network.wan.device='/dev/ttyS3'
network.wan6=interface
network.wan6.ifname='eth0.2'
network.wan6.proto='dhcpv6'
network.@switch[0]=switch
network.@switch[0].name='switch0'
network.@switch[0].reset='1'
network.@switch[0].enable_vlan='1'
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device='switch0'
network.@switch_vlan[0].vlan='1'
network.@switch_vlan[0].ports='0t 2 3 4 5'
network.@switch_vlan[1]=switch_vlan
network.@switch_vlan[1].device='switch0'
network.@switch_vlan[1].vlan='2'
network.@switch_vlan[1].ports='0t 1'
network.wan.device='/dev/ttyS3'
Jest źle. /dev/ttyUSB1 lub /dev/ttyUSB0 ustaw.
username i password także nie jest potrzebny - nie ma takich loginów u naszych operatorów.
network.wan.device='/dev/ttyS3'
Jest źle. /dev/ttyUSB1 lub /dev/ttyUSB0 ustaw.
username i password także nie jest potrzebny - nie ma takich loginów u naszych operatorów.
Ustawiałem zarówno tty/usb1 jak i tty/usb0. W każdym przypadku brak połączenia.
Co do loginu i hasła to nie mogę ich wykasować. Po zapisaniu ustawień wracają...
Masz w przeglądarce zapamiętane user/login i wpisuje Ci automatycznie w pola. Wyczyść z przeglądarki to co masz zapamiętane.
Ustaw /dev/ttyUSB0, zrestartuj i pokaż wynik logread
Wiesz dla kogoś kto jest oblatany w konsoli i poleceniach to ssh wystarczy. Ja nie jestem takim orłem.
Trening czyni mistrza.
A Cezary i tak sugeruje użycie konsoli:
network.wan.device='/dev/ttyS3'
Jest źle. /dev/ttyUSB1 lub /dev/ttyUSB0 ustaw.
Podpowiem Ci
uci set network.wan.device='/dev/ttyUSB0'
uci set network.wan.username='internet'
uci set network.wan.password='internet'
uci commit network
/etc/init.d/network reloadZaznaczasz, kopiujesz, wklejasz do konsoli i jesteś szczęśliwy.
Napisz to prościej do realizacji w LuCi
Masz w przeglądarce zapamiętane user/login i wpisuje Ci automatycznie w pola. Wyczyść z przeglądarki to co masz zapamiętane.
Ustaw /dev/ttyUSB0, zrestartuj i pokaż wynik logread
No i miałeś rację, przeglądarka zapamiętywała błędne username i password w sekcji wwan0. Skonfigurowałem przez inną która nie miała nic w pamięci dając /dev/ttyUSB0 i nawiązało połączenie Jest tylko spory problem z szybkością i podejrzewam, że może to wynikać z użycia protokołu umts/gprs/ev-do
Mam transfer rzędu 0,6 do 0,8 mega a po przełączeniu modemu pod port usb PC-ta mam ok 20 mega. Ustawiłem poprzez topnet info na sztywno "tylko LTE" ale po przełożeniu modemu do routera, przełącza mi się na niższą prędkość. Po podłączeniu znów na portu usb kompa mam łączenie po cdma...
Pamiętam że ostatnio 2 lata temu miałem też identyczny problem podczas konfiguracji poprzez GUI, sposobem na to było to co pisze powyżej Gr4nd0, czyli konfig przez ssh
ale
wtedy w widoku z GUI w pozycji wwan0 zniknęła cała konfiguracja i pojawiło się to co podałem na zdjęciach na początku postu. Protokół to "adres stały" i nic więcej do konfiguracji nie było, tylko przycisk zmień przełącznik...
Tak więc pytanie czy to jest wszystko ok i jak ewentualnie wymusić LTE w sekcji wwan routera
Podaję logi z polecenia logread o które prosiłeś
Sat Dec 3 12:49:32 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:32 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:33 2016 local2.info chat[2199]: timeout set to 30 seconds
Sat Dec 3 12:49:33 2016 local2.info chat[2199]: expect (OK)
Sat Dec 3 12:49:33 2016 local2.info chat[2199]: ^M
Sat Dec 3 12:49:33 2016 local2.info chat[2199]: AT+CGDCONT=1,"IP","internet"^M^M
Sat Dec 3 12:49:33 2016 local2.info chat[2199]: OK
Sat Dec 3 12:49:33 2016 local2.info chat[2199]: -- got it
Sat Dec 3 12:49:33 2016 local2.info chat[2199]: send (ATD*99***1#^M)
Sat Dec 3 12:49:33 2016 local2.info chat[2199]: expect (CONNECT)
Sat Dec 3 12:49:33 2016 local2.info chat[2199]: ^M
Sat Dec 3 12:49:33 2016 local2.info chat[2199]: ATD*99***1#^M^M
Sat Dec 3 12:49:33 2016 local2.info chat[2199]: CONNECT
Sat Dec 3 12:49:33 2016 local2.info chat[2199]: -- got it
Sat Dec 3 12:49:33 2016 local2.info chat[2199]: send ( ^M)
Sat Dec 3 12:49:33 2016 daemon.info pppd[2197]: Serial connection established.
Sat Dec 3 12:49:33 2016 daemon.info pppd[2197]: Using interface 3g-wan
Sat Dec 3 12:49:33 2016 daemon.notice pppd[2197]: Connect: 3g-wan <--> /dev/ttyUSB0
Sat Dec 3 12:49:33 2016 kern.info kernel: [ 36.320000] 3g-wan: renamed from ppp0
Sat Dec 3 12:49:33 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:33 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:33 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:33 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:33 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:33 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:33 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:33 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:33 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:33 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:33 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:34 2016 daemon.info dnsmasq[2232]: started, version 2.73 cachesize 150
Sat Dec 3 12:49:34 2016 daemon.info dnsmasq[2232]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Sat Dec 3 12:49:34 2016 daemon.info dnsmasq[2232]: DNS service limited to local subnets
Sat Dec 3 12:49:34 2016 daemon.info dnsmasq-dhcp[2232]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Sat Dec 3 12:49:34 2016 daemon.info dnsmasq[2232]: using local addresses only for domain lan
Sat Dec 3 12:49:34 2016 daemon.warn dnsmasq[2232]: no servers found in /tmp/resolv.conf.auto, will retry
Sat Dec 3 12:49:34 2016 daemon.info dnsmasq[2232]: read /etc/hosts - 1 addresses
Sat Dec 3 12:49:34 2016 daemon.info dnsmasq[2232]: read /tmp/hosts/dhcp - 1 addresses
Sat Dec 3 12:49:34 2016 daemon.info dnsmasq-dhcp[2232]: read /etc/ethers - 0 addresses
Sat Dec 3 12:49:34 2016 daemon.warn odhcpd[1554]: DHCPV6 SOLICIT IA_NA from 000100011bc06d8d001d0fb72557 on br-lan: ok fdda:2d6e:18fd::c27/128
Sat Dec 3 12:49:34 2016 daemon.warn odhcpd[1554]: DHCPV6 REQUEST IA_NA from 000100011bc06d8d001d0fb72557 on br-lan: ok fdda:2d6e:18fd::c27/128
Sat Dec 3 12:49:34 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:34 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:34 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:34 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:34 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:34 2016 daemon.info dnsmasq-dhcp[2232]: DHCPREQUEST(br-lan) 192.168.1.174 1c:6f:65:8f:49:26
Sat Dec 3 12:49:34 2016 daemon.info dnsmasq-dhcp[2232]: DHCPACK(br-lan) 192.168.1.174 1c:6f:65:8f:49:26 antec-computer
Sat Dec 3 12:49:34 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:34 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:35 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:35 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:35 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:35 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:35 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:35 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:35 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:35 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:35 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:36 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:36 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:36 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:36 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:36 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:36 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:36 2016 daemon.warn pppd[2197]: Could not determine remote IP address: defaulting to 10.64.64.64
Sat Dec 3 12:49:36 2016 daemon.notice pppd[2197]: local IP address 5.173.167.178
Sat Dec 3 12:49:36 2016 daemon.notice pppd[2197]: remote IP address 10.64.64.64
Sat Dec 3 12:49:36 2016 daemon.notice pppd[2197]: primary DNS address 89.108.195.20
Sat Dec 3 12:49:36 2016 daemon.notice pppd[2197]: secondary DNS address 89.108.202.20
Sat Dec 3 12:49:36 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:36 2016 daemon.notice netifd: Network device '3g-wan' link is up
Sat Dec 3 12:49:36 2016 daemon.notice netifd: Interface 'wan' is now up
Sat Dec 3 12:49:36 2016 daemon.info dnsmasq[2232]: reading /tmp/resolv.conf.auto
Sat Dec 3 12:49:36 2016 daemon.info dnsmasq[2232]: using local addresses only for domain lan
Sat Dec 3 12:49:36 2016 daemon.info dnsmasq[2232]: using nameserver 89.108.195.20#53
Sat Dec 3 12:49:36 2016 daemon.info dnsmasq[2232]: using nameserver 89.108.202.20#53
Sat Dec 3 12:49:36 2016 daemon.notice netifd: Network alias '3g-wan' link is up
Sat Dec 3 12:49:36 2016 daemon.notice netifd: Interface 'wan_6' is enabled
Sat Dec 3 12:49:36 2016 daemon.notice netifd: Interface 'wan_6' has link connectivity
Sat Dec 3 12:49:36 2016 daemon.notice netifd: Interface 'wan_6' is setting up now
Sat Dec 3 12:49:37 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:37 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:37 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:37 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:37 2016 daemon.notice netifd: radio0 (1950): handle_probe_req: send failed
Sat Dec 3 12:49:37 2016 daemon.info dnsmasq[2232]: exiting on receipt of SIGTERM
Sat Dec 3 12:49:37 2016 daemon.info dnsmasq[2355]: started, version 2.73 cachesize 150
Sat Dec 3 12:49:37 2016 daemon.info dnsmasq[2355]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Sat Dec 3 12:49:37 2016 daemon.info dnsmasq[2355]: DNS service limited to local subnets
Sat Dec 3 12:49:37 2016 daemon.info dnsmasq-dhcp[2355]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Sat Dec 3 12:49:37 2016 daemon.info dnsmasq[2355]: using local addresses only for domain lan
Sat Dec 3 12:49:37 2016 daemon.info dnsmasq[2355]: reading /tmp/resolv.conf.auto
Sat Dec 3 12:49:37 2016 daemon.info dnsmasq[2355]: using local addresses only for domain lan
Sat Dec 3 12:49:37 2016 daemon.info dnsmasq[2355]: using nameserver 89.108.195.20#53
Sat Dec 3 12:49:37 2016 daemon.info dnsmasq[2355]: using nameserver 89.108.202.20#53
Sat Dec 3 12:49:37 2016 daemon.info dnsmasq[2355]: read /etc/hosts - 1 addresses
Sat Dec 3 12:49:37 2016 daemon.info dnsmasq[2355]: read /tmp/hosts/dhcp - 1 addresses
Sat Dec 3 12:49:37 2016 daemon.info dnsmasq[2355]: read /tmp/hosts/odhcpd - 1 addresses
Sat Dec 3 12:49:37 2016 daemon.info dnsmasq-dhcp[2355]: read /etc/ethers - 0 addresses
Sat Dec 3 12:49:38 2016 daemon.notice netifd: radio0 (1950): wlan0: ACS-COMPLETED freq=2462 channel=11
Sat Dec 3 12:49:38 2016 daemon.notice netifd: radio0 (1950): Using interface wlan0 with hwaddr c0:4a:00:2c:cc:cf and ssid "gargoyle"
Sat Dec 3 12:49:38 2016 user.notice firewall: Reloading firewall due to ifup of wan (3g-wan)
Sat Dec 3 12:49:38 2016 kern.info kernel: [ 41.950000] br-lan: port 2(wlan0) entered forwarding state
Sat Dec 3 12:49:38 2016 kern.info kernel: [ 41.950000] br-lan: port 2(wlan0) entered forwarding state
Sat Dec 3 12:49:38 2016 kern.info kernel: [ 41.960000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sat Dec 3 12:49:38 2016 daemon.notice netifd: radio0 (1950): wlan0: interface state ACS->ENABLED
Sat Dec 3 12:49:38 2016 daemon.notice netifd: radio0 (1950): wlan0: AP-ENABLED
Sat Dec 3 12:49:39 2016 daemon.notice netifd: Network device 'wlan0' link is up
Sat Dec 3 12:49:39 2016 daemon.info hostapd: wlan0: STA 74:ea:3a:fe:f2:43 IEEE 802.11: authenticated
Sat Dec 3 12:49:39 2016 daemon.info hostapd: wlan0: STA 74:ea:3a:fe:f2:43 IEEE 802.11: associated (aid 1)
Sat Dec 3 12:49:40 2016 daemon.info hostapd: wlan0: STA 74:ea:3a:fe:f2:43 WPA: pairwise key handshake completed (RSN)
Sat Dec 3 12:49:40 2016 user.notice ddns-scripts[2497]: myddns_ipv4: PID '2497' started at 2016-12-03 12:49
Sat Dec 3 12:49:40 2016 user.warn ddns-scripts[2497]: myddns_ipv4: Service section disabled! - TERMINATE
Sat Dec 3 12:49:40 2016 user.warn ddns-scripts[2497]: myddns_ipv4: PID '2497' exit WITH ERROR '1' at 2016-12-03 12:49
Sat Dec 3 12:49:40 2016 kern.info kernel: [ 43.950000] br-lan: port 2(wlan0) entered forwarding state
Sat Dec 3 12:49:46 2016 kern.notice kernel: [ 49.850000] random: nonblocking pool is initialized
Sat Dec 3 13:24:11 2016 daemon.info pppd[2197]: System time change detected.
Sat Dec 3 13:33:36 2016 daemon.info hostapd: wlan0: STA 74:ea:3a:fe:f2:43 WPA: group key handshake completed (RSN)
Sat Dec 3 13:38:58 2016 authpriv.info dropbear[3209]: Child connection from 192.168.1.174:49838
Sat Dec 3 13:39:07 2016 authpriv.notice dropbear[3209]: Password auth succeeded for 'root' from 192.168.1.174:49838
Ustaw ncm to będzie szybciej. Na proto 3g jesteś ograniczony do jakiś 25Mbps.
PS. Zainstaluj sobie moje aktualne gargoyle lub luci to będzie ci się wszystko pojawiało w gui.
Ustaw ncm to będzie szybciej. Na proto 3g jesteś ograniczony do jakiś 25Mbps.
PS. Zainstaluj sobie moje aktualne gargoyle lub luci to będzie ci się wszystko pojawiało w gui.
Luci mam zainstalowane i mi działało właśnie na luci. Gargoyle miałem i nie chcę bo obcinało prędkość z powodu jakichś ograniczeń w komunikacji z e3272
Znalazłem w innym wątku komendy które podajesz dla ustawienia ncm.
o to chodzi?
option proto 'ncm'
option device /dev/ttyUSB1
option apn internet
Strony Poprzednia 1 2 3 Następna
Zaloguj się lub zarejestruj by napisać odpowiedź
eko.one.pl → Oprogramowanie / Software → problem z pinem na open wrt i E3272
Forum oparte o PunBB, wspierane przez Informer Technologies, Inc