26 Odpowiedź przez eerozeteen

  • Zarejestrowany: 2013-06-24
  • Posty: 100

Odp: Obsługa modemu ZTE MF631

to ja juz nie wiem:
ttyUSB0

Tue Sep 27 21:00:37 2016 daemon.notice netifd: Interface 'wan2' is setting up now
Tue Sep 27 21:00:39 2016 daemon.notice pppd[7374]: pppd 2.4.7 started by root, uid 0
Tue Sep 27 21:00:40 2016 local2.info chat[7386]: abort on (BUSY)
Tue Sep 27 21:00:40 2016 local2.info chat[7386]: abort on (NO CARRIER)
Tue Sep 27 21:00:40 2016 local2.info chat[7386]: abort on (ERROR)
Tue Sep 27 21:00:40 2016 local2.info chat[7386]: report (CONNECT)
Tue Sep 27 21:00:40 2016 local2.info chat[7386]: timeout set to 10 seconds
Tue Sep 27 21:00:40 2016 local2.info chat[7386]: send (AT&F^M)
Tue Sep 27 21:00:40 2016 local2.info chat[7386]: expect (OK)
Tue Sep 27 21:00:50 2016 local2.info chat[7386]: alarm
Tue Sep 27 21:00:50 2016 local2.info chat[7386]: Failed
Tue Sep 27 21:00:50 2016 daemon.err pppd[7374]: Connect script failed
Tue Sep 27 21:00:51 2016 daemon.info pppd[7374]: Exit.
Tue Sep 27 21:00:51 2016 daemon.notice netifd: Interface 'wan2' is now down

ttyUSB1

Tue Sep 27 21:02:40 2016 daemon.notice netifd: Interface 'wan2' is setting up now
Tue Sep 27 21:02:42 2016 daemon.notice pppd[7789]: pppd 2.4.7 started by root, uid 0
Tue Sep 27 21:02:43 2016 local2.info chat[7791]: abort on (BUSY)
Tue Sep 27 21:02:43 2016 local2.info chat[7791]: abort on (NO CARRIER)
Tue Sep 27 21:02:43 2016 local2.info chat[7791]: abort on (ERROR)
Tue Sep 27 21:02:43 2016 local2.info chat[7791]: report (CONNECT)
Tue Sep 27 21:02:43 2016 local2.info chat[7791]: timeout set to 10 seconds
Tue Sep 27 21:02:43 2016 local2.info chat[7791]: send (AT&F^M)
Tue Sep 27 21:02:43 2016 local2.info chat[7791]: expect (OK)
Tue Sep 27 21:02:45 2016 daemon.warn pppd[7789]: Child process USE_APN=darmowy DIALNUMBER=*99***1# /usr/sbin/chat -t5 -v -E -f /etc/chatscripts/3g.chat (pid 7790) terminated with signal 15
Tue Sep 27 21:02:45 2016 daemon.err pppd[7789]: Connect script failed
Tue Sep 27 21:02:46 2016 daemon.info pppd[7789]: Exit.
Tue Sep 27 21:02:46 2016 daemon.notice netifd: Interface 'wan2' is now down

ttyUSB2 - to co wyzej

Tue Sep 27 21:03:49 2016 daemon.notice netifd: Interface 'wan2' is setting up now
Tue Sep 27 21:03:51 2016 daemon.notice pppd[8074]: pppd 2.4.7 started by root, uid 0
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: abort on (BUSY)
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: abort on (NO CARRIER)
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: abort on (ERROR)
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: report (CONNECT)
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: timeout set to 10 seconds
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: send (AT&F^M)
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: expect (OK)
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: AT&F^M^M
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: OK
Tue Sep 27 21:03:52 2016 local2.info chat[8076]:  -- got it
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: send (ATE1^M)
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: expect (OK)
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: ^M
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: ATE1^M^M
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: OK
Tue Sep 27 21:03:52 2016 local2.info chat[8076]:  -- got it
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: send (AT+CGDCONT=1,"IP","darmowy"^M)
Tue Sep 27 21:03:52 2016 daemon.warn pppd[8074]: Child process USE_APN=darmowy DIALNUMBER=*99***1# /usr/sbin/chat -t5 -v -E -f /etc/chatscripts/3g.chat (pid 8075) terminated with signal 15
Tue Sep 27 21:03:52 2016 daemon.err pppd[8074]: Connect script failed
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: timeout set to 30 seconds
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: expect (OK)
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: CONT=1,"IP","darmowy"^M^M
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: OK
Tue Sep 27 21:03:52 2016 local2.info chat[8076]:  -- got it
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: send (ATD*99***1#^M)
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: expect (CONNECT)
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: ^M
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: ATD*99***1#^M^M
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: ERROR
Tue Sep 27 21:03:52 2016 local2.info chat[8076]:  -- failed
Tue Sep 27 21:03:52 2016 local2.info chat[8076]: Failed (ERROR)
Tue Sep 27 21:03:53 2016 daemon.info pppd[8074]: Exit.
Tue Sep 27 21:03:53 2016 daemon.notice netifd: Interface 'wan2' is now down

Dodam ze modem na moim lapku z arch linuxem bez problemu polaczyl sie z Aero2 (jakby to mialo jakies znaczenie..)

27 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,904

Odp: Obsługa modemu ZTE MF631

No to zobacz co go właściwie obsługuje (stan usb-devices) i na którym i jakim interfejsie masz połączenie.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

28 Odpowiedź przez eerozeteen

  • Zarejestrowany: 2013-06-24
  • Posty: 100

Odp: Obsługa modemu ZTE MF631

nie wiem czy dobrze zrozumialem twojego posta. podlaczylem modem pod lapka:

dmesg z podlaczenia pod lapka

[ 7642.560197] usb 2-1.1: new high-speed USB device number 9 using ehci-pci
[ 7642.648807] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[ 7642.649003] scsi host6: usb-storage 2-1.1:1.0
[ 7648.259671] usb 2-1.1: USB disconnect, device number 9
[ 7648.542796] usb 2-1.1: new high-speed USB device number 10 using ehci-pci
[ 7648.631172] option 2-1.1:1.0: GSM modem (1-port) converter detected
[ 7648.631315] usb 2-1.1: GSM modem (1-port) converter now attached to ttyUSB0
[ 7648.631483] option 2-1.1:1.1: GSM modem (1-port) converter detected
[ 7648.631613] usb 2-1.1: GSM modem (1-port) converter now attached to ttyUSB1
[ 7648.631746] usb-storage 2-1.1:1.2: USB Mass Storage device detected
[ 7648.631910] scsi host6: usb-storage 2-1.1:1.2
[ 7648.632174] option 2-1.1:1.3: GSM modem (1-port) converter detected
[ 7648.632272] usb 2-1.1: GSM modem (1-port) converter now attached to ttyUSB2
[ 7649.633768] scsi 6:0:0:0: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[ 7649.638622] sd 6:0:0:0: [sdb] Attached SCSI removable disk

journalctl -xb z polaczenia:

wrz 27 21:22:07 titanium nm-dispatcher[16143]: req:1 'connectivity-change': new request (0 scripts)
wrz 27 21:22:07 titanium nm-dispatcher[16143]: req:1 'connectivity-change': completed: no scripts
wrz 27 21:22:07 titanium NetworkManager[498]: <info>  [1475004127.1837] manager: NetworkManager state is now CONNECTED_GLOBAL
wrz 27 21:22:07 titanium NetworkManager[498]: <info>  [1475004127.1840] policy: set 'aero2' (ppp0) as default for IPv4 routing and DNS
wrz 27 21:22:07 titanium NetworkManager[498]: <info>  [1475004127.1842] device (ttyUSB2): Activation: successful, device activated.
wrz 27 21:22:07 titanium nm-dispatcher[16143]: req:2 'up' [ppp0]: new request (0 scripts)
wrz 27 21:22:07 titanium nm-dispatcher[16143]: req:2 'up' [ppp0]: completed: no scripts
wrz 27 21:22:33 titanium pppd[16121]: IPV6CP: timeout sending Config-Requests
wrz 27 21:22:33 titanium NetworkManager[498]: IPV6CP: timeout sending Config-Requests

Jezeli cos mam jescze pokazac psrawdzic to prosze o jakies dokladniejsze wskazowki smile

29 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,904

Odp: Obsługa modemu ZTE MF631

usb-devices jeszcze. Ale tu już widać że uzywa /dev/ttyUSB2, tyle że u ciebie jest błąd połączenia na nim.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

30 Odpowiedź przez eerozeteen

  • Zarejestrowany: 2013-06-24
  • Posty: 100

Odp: Obsługa modemu ZTE MF631

T:  Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 12 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=0031 Rev=00.00
S:  Manufacturer=ZTE,Incorporated
S:  Product=ZTE WCDMA Technologies MSM
S:  SerialNumber=MF6310ZTED010000
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

31 Odpowiedź przez eerozeteen

  • Zarejestrowany: 2013-06-24
  • Posty: 100

Odp: Obsługa modemu ZTE MF631

Dziwne, teraz na ttyUSB2 odrazu poszlo:

Tue Sep 27 21:43:45 2016 daemon.notice netifd: Interface 'wan2' is setting up now
Tue Sep 27 21:43:46 2016 daemon.notice pppd[11490]: pppd 2.4.7 started by root, uid 0
Tue Sep 27 21:43:47 2016 local2.info chat[11492]: abort on (BUSY)
Tue Sep 27 21:43:47 2016 local2.info chat[11492]: abort on (NO CARRIER)
Tue Sep 27 21:43:47 2016 local2.info chat[11492]: abort on (ERROR)
Tue Sep 27 21:43:47 2016 local2.info chat[11492]: report (CONNECT)
Tue Sep 27 21:43:47 2016 local2.info chat[11492]: timeout set to 10 seconds
Tue Sep 27 21:43:47 2016 local2.info chat[11492]: send (AT&F^M)
Tue Sep 27 21:43:47 2016 local2.info chat[11492]: expect (OK)
Tue Sep 27 21:43:47 2016 local2.info chat[11492]: AT&F^M^M
Tue Sep 27 21:43:47 2016 local2.info chat[11492]: OK
Tue Sep 27 21:43:47 2016 local2.info chat[11492]:  -- got it
Tue Sep 27 21:43:47 2016 local2.info chat[11492]: send (ATE1^M)
Tue Sep 27 21:43:48 2016 local2.info chat[11492]: expect (OK)
Tue Sep 27 21:43:48 2016 local2.info chat[11492]: ^M
Tue Sep 27 21:43:48 2016 local2.info chat[11492]: ATE1^M^M
Tue Sep 27 21:43:48 2016 local2.info chat[11492]: OK
Tue Sep 27 21:43:48 2016 local2.info chat[11492]:  -- got it
Tue Sep 27 21:43:48 2016 local2.info chat[11492]: send (AT+CGDCONT=1,"IP","darmowy"^M)
Tue Sep 27 21:43:48 2016 local2.info chat[11492]: timeout set to 30 seconds
Tue Sep 27 21:43:48 2016 local2.info chat[11492]: expect (OK)
Tue Sep 27 21:43:48 2016 local2.info chat[11492]: ^M
Tue Sep 27 21:43:48 2016 local2.info chat[11492]: AT+CGDCONT=1,"IP","darmowy"^M^M
Tue Sep 27 21:43:48 2016 local2.info chat[11492]: OK
Tue Sep 27 21:43:48 2016 local2.info chat[11492]:  -- got it
Tue Sep 27 21:43:48 2016 local2.info chat[11492]: send (ATD*99***1#^M)
Tue Sep 27 21:43:48 2016 local2.info chat[11492]: expect (CONNECT)
Tue Sep 27 21:43:48 2016 local2.info chat[11492]: ^M
Tue Sep 27 21:43:48 2016 local2.info chat[11492]: ATD*99***1#^M^M
Tue Sep 27 21:43:48 2016 local2.info chat[11492]: CONNECT
Tue Sep 27 21:43:48 2016 local2.info chat[11492]:  -- got it
Tue Sep 27 21:43:48 2016 local2.info chat[11492]: send ( ^M)
Tue Sep 27 21:43:48 2016 daemon.info pppd[11490]: Serial connection established.
Tue Sep 27 21:43:48 2016 daemon.info pppd[11490]: Using interface 3g-wan2
Tue Sep 27 21:43:48 2016 daemon.notice pppd[11490]: Connect: 3g-wan2 <--> /dev/ttyUSB2
Tue Sep 27 21:43:48 2016 kern.info kernel: [ 4963.670000] 3g-wan2: renamed from ppp0
Tue Sep 27 21:43:52 2016 daemon.warn pppd[11490]: Could not determine remote IP address: defaulting to x.x.x.x
Tue Sep 27 21:43:52 2016 daemon.notice pppd[11490]: local  IP address x.x.x.x
Tue Sep 27 21:43:52 2016 daemon.notice pppd[11490]: remote IP address x.x.x.x
Tue Sep 27 21:43:52 2016 daemon.notice pppd[11490]: primary   DNS address x.x.x.x
Tue Sep 27 21:43:52 2016 daemon.notice pppd[11490]: secondary DNS address x.x.x.x
Tue Sep 27 21:43:53 2016 daemon.notice netifd: Network device '3g-wan2' link is up
Tue Sep 27 21:43:53 2016 daemon.notice netifd: Interface 'wan2' is now up