[    0.000000] Linux version 3.18.36 (cezary@eko.one.pl) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r48153) ) #2 Sun Jul 10 09:48:18 CEST 2016
[    0.000000] SoC Type: Ralink RT3350 id:1 rev:2
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
[    0.000000] MIPS: machine is Teltonika RUT5XX
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 802f3e90, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00007de0
[    0.000000] Readback ErrCtl register=00007de0
[    0.000000] Memory: 28952K/32768K available (2499K kernel code, 119K rwdata, 492K rodata, 144K init, 185K bss, 3816K reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] CPU Clock: 320MHz
[    0.000000] clocksource_of_init: no matching clocksources found
[    0.070000] Calibrating delay loop... 212.58 BogoMIPS (lpj=1062912)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.100000] pinctrl core: initialized pinctrl subsystem
[    0.110000] NET: Registered protocol family 16
[    0.120000] rt2880-pinmux pinctrl: try to register 52 pins ...
[    0.120000] pinctrl core: registered pin 0 (io0) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 1 (io1) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 2 (io2) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 3 (io3) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 4 (io4) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 5 (io5) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 6 (io6) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 7 (io7) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 8 (io8) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 9 (io9) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 10 (io10) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 11 (io11) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 12 (io12) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 13 (io13) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 14 (io14) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 15 (io15) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 16 (io16) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 17 (io17) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 18 (io18) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 19 (io19) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 20 (io20) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 21 (io21) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 22 (io22) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 23 (io23) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 24 (io24) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 25 (io25) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 26 (io26) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 27 (io27) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 28 (io28) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 29 (io29) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 30 (io30) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 31 (io31) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 32 (io32) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 33 (io33) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 34 (io34) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 35 (io35) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 36 (io36) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 37 (io37) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 38 (io38) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 39 (io39) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 40 (io40) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 41 (io41) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 42 (io42) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 43 (io43) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 44 (io44) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 45 (io45) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 46 (io46) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 47 (io47) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 48 (io48) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 49 (io49) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 50 (io50) on rt2880-pinmux
[    0.120000] pinctrl core: registered pin 51 (io51) on rt2880-pinmux
[    0.120000] pinctrl core: add 6 pinmux maps
[    0.120000] rt2880-pinmux pinctrl: found group selector 7 for sdram
[    0.120000] rt2880-pinmux pinctrl: found group selector 0 for i2c
[    0.120000] rt2880-pinmux pinctrl: found group selector 4 for jtag
[    0.120000] rt2880-pinmux pinctrl: found group selector 6 for rgmii
[    0.120000] rt2880-pinmux pinctrl: found group selector 5 for mdio
[    0.120000] rt2880-pinmux pinctrl: found group selector 2 for uartf
[    0.120000] rt2880-pinmux pinctrl: request pin 24 (io24) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 25 (io25) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 26 (io26) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 27 (io27) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 28 (io28) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 29 (io29) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 30 (io30) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 31 (io31) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 32 (io32) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 33 (io33) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 34 (io34) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 35 (io35) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 36 (io36) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 37 (io37) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 38 (io38) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 39 (io39) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 1 (io1) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 2 (io2) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 17 (io17) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 18 (io18) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 19 (io19) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 20 (io20) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 21 (io21) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 40 (io40) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 41 (io41) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 42 (io42) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 43 (io43) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 44 (io44) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 45 (io45) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 46 (io46) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 47 (io47) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 48 (io48) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 49 (io49) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 50 (io50) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 51 (io51) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 22 (io22) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 23 (io23) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 7 (io7) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 8 (io8) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 9 (io9) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 10 (io10) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 11 (io11) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 12 (io12) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 13 (io13) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: request pin 14 (io14) for pinctrl
[    0.120000] rt2880-pinmux pinctrl: failed to lookup the sleep state
[    0.130000] rt2880_gpio 10000600.gpio: registering 24 gpios
[    0.140000] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[    0.150000] Switched to clocksource MIPS
[    0.160000] NET: Registered protocol family 2
[    0.170000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.190000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.210000] TCP: reno registered
[    0.210000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.220000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.240000] NET: Registered protocol family 1
[    0.250000] rt-timer 10000100.timer: maximum frequency is 6510Hz
[    0.260000] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT
[    0.260000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.320000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.380000] msgmni has been set to 56
[    0.390000] io scheduler noop registered
[    0.390000] io scheduler deadline registered (default)
[    0.400000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.420000] serial8250 serial8250: no of_node; not parsing pinctrl DT
[    0.420000] pinctrl core: add 1 pinmux maps
[    0.420000] rt2880-pinmux pinctrl: found group selector 3 for uartlite
[    0.420000] rt2880-pinmux pinctrl: request pin 15 (io15) for 10000c00.uartlite
[    0.420000] rt2880-pinmux pinctrl: request pin 16 (io16) for 10000c00.uartlite
[    0.420000] console [ttyS0] disabled
[    0.430000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 6666666) is a 16550A
[    0.450000] console [ttyS0] enabled
[    0.460000] bootconsole [early0] disabled
[    0.480000] pinctrl core: add 1 pinmux maps
[    0.480000] rt2880-pinmux pinctrl: found group selector 1 for spi
[    0.480000] rt2880-pinmux pinctrl: request pin 3 (io3) for 10000b00.spi
[    0.480000] rt2880-pinmux pinctrl: request pin 4 (io4) for 10000b00.spi
[    0.480000] rt2880-pinmux pinctrl: request pin 5 (io5) for 10000b00.spi
[    0.480000] rt2880-pinmux pinctrl: request pin 6 (io6) for 10000b00.spi
[    0.510000] m25p80 spi32766.0: n25q128a13 (16384 Kbytes)
[    0.520000] 4 ofpart partitions found on MTD device spi32766.0
[    0.530000] Creating 4 MTD partitions on "spi32766.0":
[    0.540000] 0x000000000000-0x000000030000 : "u-boot"
[    0.560000] 0x000000030000-0x000000040000 : "u-boot-env"
[    0.570000] 0x000000040000-0x000000050000 : "factory"
[    0.580000] 0x000000050000-0x000000800000 : "firmware"
[    0.660000] 2 uimage-fw partitions found on MTD device firmware
[    0.670000] 0x000000050000-0x000000161d57 : "kernel"
[    0.690000] 0x000000161d57-0x000000800000 : "rootfs"
[    0.700000] mtd: device 5 (rootfs) set to be root filesystem
[    0.710000] 1 squashfs-split partitions found on MTD device rootfs
[    0.720000] 0x000000500000-0x000000800000 : "rootfs_data"
[    0.740000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq 5
[    0.760000] rt2880_wdt 10000120.watchdog: Initialized
[    0.770000] TCP: cubic registered
[    0.780000] NET: Registered protocol family 17
[    0.780000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    0.810000] Bridge firewalling registered
[    0.820000] 8021q: 802.1Q VLAN Support v1.8
[    0.870000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    0.880000] Freeing unused kernel memory: 144K (8030c000 - 80330000)
[    4.180000] init: Console is alive
[    4.190000] init: - watchdog -
[    8.280000] usbcore: registered new interface driver usbfs
[    8.290000] usbcore: registered new interface driver hub
[    8.300000] usbcore: registered new device driver usb
[    8.320000] rt2880-pinmux pinctrl: request pin 10 (io10) for pio:10
[    8.320000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    8.340000] ehci-platform: EHCI generic platform driver
[    9.220000] dwc2 101c0000.otg: DWC OTG Controller
[    9.230000] dwc2 101c0000.otg: new USB bus registered, assigned bus number 1
[    9.240000] dwc2 101c0000.otg: irq 26, io mem 0x00000000
[    9.250000] usb usb1: no of_node; not parsing pinctrl DT
[    9.250000] hub 1-0:1.0: no of_node; not parsing pinctrl DT
[    9.250000] hub 1-0:1.0: USB hub found
[    9.260000] hub 1-0:1.0: 1 port detected
[    9.270000] rt2880-pinmux pinctrl: request pin 14 (io14) for pio:14
[    9.660000] usb 1-1: new low-speed USB device number 2 using dwc2
[    9.670000] usb usb1: clear tt 1 (8000) error -22
[    9.680000] usb usb1: clear tt 1 (8000) error -22
[    9.690000] usb usb1: clear tt 1 (8000) error -22
[    9.700000] usb usb1: clear tt 1 (8000) error -22
[    9.710000] usb usb1: clear tt 1 (8000) error -22
[    9.720000] usb usb1: clear tt 1 (8000) error -22
[    9.730000] usb usb1: clear tt 1 (8000) error -22
[    9.740000] usb usb1: clear tt 1 (8000) error -22
[    9.750000] usb usb1: clear tt 1 (8000) error -22
[    9.940000] usb 1-1: device descriptor read/64, error -71
[   10.060000] usb usb1: clear tt 1 (8000) error -22
[   10.070000] usb usb1: clear tt 1 (8000) error -22
[   10.080000] usb usb1: clear tt 1 (8000) error -22
[   10.090000] usb usb1: clear tt 1 (8000) error -22
[   10.100000] usb usb1: clear tt 1 (8000) error -22
[   10.110000] usb usb1: clear tt 1 (8000) error -22
[   10.120000] usb usb1: clear tt 1 (8000) error -22
[   10.130000] usb usb1: clear tt 1 (8000) error -22
[   10.140000] usb usb1: clear tt 1 (8000) error -22
[   10.250000] init: - preinit -
[   10.400000] usb 1-1: device descriptor read/64, error -71
[   11.000000] usb 1-1: new low-speed USB device number 3 using dwc2
[   11.200000] usb usb1: clear tt 1 (8000) error -22
[   11.340000] usb usb1: clear tt 1 (8000) error -22
[   11.350000] usb usb1: clear tt 1 (8000) error -22
[   11.360000] usb usb1: clear tt 1 (8000) error -22
[   11.370000] usb usb1: clear tt 1 (8000) error -22
[   11.380000] usb usb1: clear tt 1 (8000) error -22
[   11.400000] usb usb1: clear tt 1 (8000) error -22
[   11.520000] usb usb1: clear tt 1 (8000) error -22
[   11.530000] usb usb1: clear tt 1 (8000) error -22
[   11.750000] 8021q: adding VLAN 0 to HW filter on device eth0
[   11.790000] usb 1-1: device descriptor read/64, error -71
[   11.940000] usb usb1: clear tt 1 (8000) error -22
[   11.970000] usb usb1: clear tt 1 (8000) error -22
[   11.980000] usb usb1: clear tt 1 (8000) error -22
[   11.990000] usb usb1: clear tt 1 (8000) error -22
[   12.000000] usb usb1: clear tt 1 (8000) error -22
[   12.010000] usb usb1: clear tt 1 (8000) error -22
[   12.020000] usb usb1: clear tt 1 (8000) error -22
[   12.030000] usb usb1: clear tt 1 (8000) error -22
[   12.040000] usb usb1: clear tt 1 (8000) error -22
[   12.050000] random: procd urandom read with 19 bits of entropy available
[   12.230000] usb 1-1: device descriptor read/64, error -71
[   12.540000] usb 1-1: new low-speed USB device number 4 using dwc2
[   12.550000] usb usb1: clear tt 1 (0000) error -22
[   12.560000] usb usb1: clear tt 1 (0000) error -22
[   12.570000] usb usb1: clear tt 1 (0000) error -22
[   12.780000] usb usb1: clear tt 1 (0000) error -22
[   12.790000] usb usb1: clear tt 1 (0000) error -22
[   12.800000] usb usb1: clear tt 1 (0000) error -22
[   13.010000] usb 1-1: device not accepting address 4, error -71
[   13.210000] usb 1-1: new low-speed USB device number 5 using dwc2
[   13.220000] usb usb1: clear tt 1 (0000) error -22
[   13.230000] usb usb1: clear tt 1 (0000) error -22
[   13.240000] usb usb1: clear tt 1 (0000) error -22
[   13.450000] usb usb1: clear tt 1 (0000) error -22
[   13.460000] usb usb1: clear tt 1 (0000) error -22
[   13.470000] usb usb1: clear tt 1 (0000) error -22
[   13.680000] usb 1-1: device not accepting address 5, error -71
[   13.690000] usb usb1-port1: unable to enumerate USB device
[   15.870000] jffs2: notice: (306) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   15.910000] mount_root: switching to jffs2 overlay
[   16.020000] procd: - early -
[   16.030000] procd: - watchdog -
[   17.110000] procd: - ubus -
[   18.150000] procd: - init -
[   22.720000] tun: Universal TUN/TAP device driver, 1.6
[   22.730000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   22.750000] gre: GRE over IPv4 demultiplexor driver
[   22.760000] ip_gre: GRE over IPv4 tunneling driver
[   22.820000] nf_conntrack version 0.5.0 (454 buckets, 1816 max)
[   22.870000]  Hooked IMQ after mangle on PREROUTING
[   22.880000]  Hooked IMQ after nat on POSTROUTING
[   22.890000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1, imq_dev_accurate_stats = 1)
[   22.900000]  Hooking IMQ before NAT on PREROUTING.
[   22.910000]  Hooking IMQ after NAT on POSTROUTING.
[   22.950000] u32 classifier
[   22.960000]     input device check on
[   22.970000]     Actions configured
[   23.010000] Mirror/redirect action on
[   23.150000] usbcore: registered new interface driver cdc_acm
[   23.170000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   23.190000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[   23.200000] Backport generated by backports.git backports-20151218-0-g2f58d9d
[   23.320000] Ebtables v2.0 registered
[   23.350000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   23.570000] Netfilter messages via NETLINK v0.30.
[   23.800000] xt_time: kernel timezone is -0000
[   24.110000] PPP generic driver version 2.4.2
[   24.120000] NET: Registered protocol family 24
[   24.140000] PPTP driver version 0.8.5
[   24.230000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0200 detected
[   24.240000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0008 detected
[   24.260000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   28.490000] rt2880-pinmux pinctrl: request pin 11 (io11) for pio:11
[   38.850000] 8021q: adding VLAN 0 to HW filter on device eth0
[   39.060000] device eth0.1 entered promiscuous mode
[   39.070000] device eth0 entered promiscuous mode
[   39.140000] br-lan: port 1(eth0.1) entered forwarding state
[   39.150000] br-lan: port 1(eth0.1) entered forwarding state
[   39.220000] device eth0.2 entered promiscuous mode
[   39.230000] br-lan: port 2(eth0.2) entered forwarding state
[   39.240000] br-lan: port 2(eth0.2) entered forwarding state
[   41.150000] br-lan: port 1(eth0.1) entered forwarding state
[   41.240000] br-lan: port 2(eth0.2) entered forwarding state
[   79.350000] random: nonblocking pool is initialized