1 Temat przez raw

  • raw
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-09-01
  • Posty: 41

Temat: Arcor 803 i E3131

O dziwo instalacja CC na powyzszym cudzie przebiegla bez wiekszych problemów. Okazalo sie ze padniety jest tylko port WAN ale z tym sobie dałem rade. Teraz chciałbym sobie odpalic na tym ww modem. Jakies sugestie? Na wr842nd dziala to praktycznie od kopa, tutaj nie moge skonfigurować połaczenia....

http://i.imgur.com/6jhIN3G.png

root@OpenWrt:~# cat /sys/kernel/debug/usb/devices

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.18
S:  Manufacturer=Linux 3.18.20 ifxusb_hcd
S:  Product=IFX USB Controller
S:  SerialNumber=ifxusb_hcd
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1506 Rev= 1.02
S:  Manufacturer=HUAWEI
S:  Product=HUAWEI Mobile
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:  If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=03 Driver=(none)
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=02 Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 4
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.18
S:  Manufacturer=Linux 3.18.20 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:0f.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

i jeszcze... 

root@OpenWrt:~# opkg list_installed | grep kmod
kmod-atm - 3.18.20-1
kmod-cfg80211 - 3.18.20+2015-03-09-3
kmod-crypto-aes - 3.18.20-1
kmod-crypto-arc4 - 3.18.20-1
kmod-crypto-core - 3.18.20-1
kmod-eeprom-93cx6 - 3.18.20-1
kmod-gpio-button-hotplug - 3.18.20-1
kmod-ip6tables - 3.18.20-1
kmod-ipt-conntrack - 3.18.20-1
kmod-ipt-core - 3.18.20-1
kmod-ipt-nat - 3.18.20-1
kmod-ipv6 - 3.18.20-1
kmod-leds-gpio - 3.18.20-1
kmod-ledtrig-usbdev - 3.18.20-1
kmod-lib-crc-ccitt - 3.18.20-1
kmod-lib-crc-itu-t - 3.18.20-1
kmod-ltq-adsl-danube - 3.18.20+3.24.4.4-1
kmod-ltq-adsl-danube-fw-b - 0.1-1
kmod-ltq-adsl-danube-mei - 3.18.20-1
kmod-ltq-atm-danube - 3.18.20-1
kmod-ltq-hcd-danube - 3.18.20-1
kmod-ltq-ifxos - 3.18.20+1.5.14-3
kmod-ltq-tapi - 3.18.20+3.13.0-3
kmod-ltq-vmmc - 3.18.20+1.9.0-2
kmod-mac80211 - 3.18.20+2015-03-09-3
kmod-mii - 3.18.20-1
kmod-nf-conntrack - 3.18.20-1
kmod-nf-conntrack6 - 3.18.20-1
kmod-nf-ipt - 3.18.20-1
kmod-nf-ipt6 - 3.18.20-1
kmod-nf-nat - 3.18.20-1
kmod-nf-nathelper - 3.18.20-1
kmod-nls-base - 3.18.20-1
kmod-ppp - 3.18.20-1
kmod-pppoa - 3.18.20-1
kmod-pppoe - 3.18.20-1
kmod-pppox - 3.18.20-1
kmod-rt2800-lib - 3.18.20+2015-03-09-3
kmod-rt2800-mmio - 3.18.20+2015-03-09-3
kmod-rt2800-pci - 3.18.20+2015-03-09-3
kmod-rt2x00-lib - 3.18.20+2015-03-09-3
kmod-rt2x00-mmio - 3.18.20+2015-03-09-3
kmod-rt2x00-pci - 3.18.20+2015-03-09-3
kmod-slhc - 3.18.20-1
kmod-usb-core - 3.18.20-1
kmod-usb-net - 3.18.20-1
kmod-usb-net-cdc-ether - 3.18.20-1
kmod-usb-uhci - 3.18.20-1
kmod-usb2 - 3.18.20-1
kmod-usb2-pci - 3.18.20-1

usb-modeswitch tez zainstalowane. Any ideas?

2 Odpowiedź przez mar_w (edytowany przez mar_w 2016-02-06 17:03:41)

  • mar_w
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-08-16
  • Posty: 2,124

Odp: Arcor 803 i E3131

Moim zdaniem brakuje Ci pakietów. U mnie e3131 przedstawia się tak:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1506 Rev= 1.02
S:  Manufacturer=HUAWEI
S:  Product=HUAWEI Mobile
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:* If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=03 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=02 Driver=option
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Pakiety mam takie:

root@OpenWrt:~# opkg list |grep kmod-usb
kmod-usb-acm - 3.18.23-1
kmod-usb-core - 3.18.23-1
kmod-usb-net - 3.18.23-1
kmod-usb-net-cdc-ether - 3.18.23-1
kmod-usb-net-cdc-mbim - 3.18.23-1
kmod-usb-net-cdc-ncm - 3.18.23-1
kmod-usb-net-huawei-cdc-ncm - 3.18.23-1
kmod-usb-net-qmi-wwan - 3.18.23-1
kmod-usb-net-rndis - 3.18.23-1
kmod-usb-net-sierrawireless - 3.18.23-1
kmod-usb-ohci - 3.18.23-1
kmod-usb-printer - 3.18.23-1
kmod-usb-serial - 3.18.23-1
kmod-usb-serial-option - 3.18.23-1
kmod-usb-serial-sierrawireless - 3.18.23-1
kmod-usb-serial-wwan - 3.18.23-1
kmod-usb-storage - 3.18.23-1
kmod-usb-wdm - 3.18.23-1
kmod-usb2 - 3.18.23-1

chociaż nie wszystkie są potrzebne do obsługi modemu. Wybierz te co mój /sys/kernel.... wypisał. Skojarzysz bez problemu o które pakiety chodzi. Interfejs to chyba powinien być /dev/cdc-wdm0 (nie korzystam już z tego modemu dlatego taka sugestia z mojej strony)

Xiaomi AX3000T @ Netgear R6220
* DVBT2 - T230C *

3 Odpowiedź przez raw

  • raw
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-09-01
  • Posty: 41

Odp: Arcor 803 i E3131

Dobra, pokazaly sie nowe urzadzenia, w /dev.ttyUSB.. w logach....

[  801.588000] usb 2-1: new high-speed USB device number 9 using ifxusb_hcd
[  801.840000] option 2-1:1.0: GSM modem (1-port) converter detected
[  801.844000] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
[  801.860000] huawei_cdc_ncm 2-1:1.1: MAC-Address: 58:2c:80:13:27:8e
[  801.864000] huawei_cdc_ncm 2-1:1.1: setting rx_max = 16384
[  801.880000] huawei_cdc_ncm 2-1:1.1: setting tx_max = 16384
[  801.892000] huawei_cdc_ncm 2-1:1.1: cdc-wdm0: USB WDM device
[  801.896000] huawei_cdc_ncm 2-1:1.1 wwan0: register 'huawei_cdc_ncm' at usb-ifxusb_hcd-1, Huawei CDC NCM device, 58:2c:80:13:27:8e
[  801.908000] option 2-1:1.2: GSM modem (1-port) converter detected
[  801.916000] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
[  801.920000] option 2-1:1.3: GSM modem (1-port) converter detected
[  801.928000] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2

4 Odpowiedź przez mar_w

  • mar_w
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-08-16
  • Posty: 2,124

Odp: Arcor 803 i E3131

Ale spróbuj użyć trybu NDIS zamiast RAS. RAS korzysta z /dev/ttyUSB a NDIS z tego co pisałem:
http://eko.one.pl/forum/viewtopic.php?p … 12#p127712

Xiaomi AX3000T @ Netgear R6220
* DVBT2 - T230C *

5 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,877

Odp: Arcor 803 i E3131

device był zły...

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

6 Odpowiedź przez raw

  • raw
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-09-01
  • Posty: 41

Odp: Arcor 803 i E3131

niestety dalej nie działa....

w logach widze:

Fri Feb 12 18:36:54 2016 kern.info kernel: [    0.352000] console [ttyLTQ0] enabled
Fri Feb 12 18:36:54 2016 kern.info kernel: [    0.360000] bootconsole [early0] disabled
Fri Feb 12 18:36:54 2016 kern.notice kernel: [    0.368000] lantiq nor flash device: 00800000 at 10000000
Fri Feb 12 18:36:54 2016 kern.info kernel: [    0.372000] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb
Fri Feb 12 18:36:54 2016 kern.info kernel: [    0.380000] Amd/Fujitsu Extended Query Table at 0x0040
Fri Feb 12 18:36:54 2016 kern.info kernel: [    0.388000]   Amd/Fujitsu Extended Query version 1.1.
Fri Feb 12 18:36:54 2016 kern.notice kernel: [    0.392000] number of CFI chips: 1
Fri Feb 12 18:36:54 2016 kern.notice kernel: [    0.396000] 4 ofpart partitions found on MTD device ltq_nor
Fri Feb 12 18:36:54 2016 kern.notice kernel: [    0.400000] Creating 4 MTD partitions on "ltq_nor":
Fri Feb 12 18:36:54 2016 kern.notice kernel: [    0.404000] 0x000000000000-0x000000030000 : "uboot"
Fri Feb 12 18:36:54 2016 kern.notice kernel: [    0.412000] 0x000000030000-0x000000040000 : "uboot_env"
Fri Feb 12 18:36:54 2016 kern.notice kernel: [    0.416000] 0x000000040000-0x0000007f0000 : "firmware"
Fri Feb 12 18:36:54 2016 kern.notice kernel: [    0.488000] 2 uimage-fw partitions found on MTD device firmware
Fri Feb 12 18:36:54 2016 kern.notice kernel: [    0.496000] 0x000000040000-0x0000001a0d4d : "kernel"
Fri Feb 12 18:36:54 2016 kern.notice kernel: [    0.500000] 0x0000001a0d4d-0x0000007f0000 : "rootfs"
Fri Feb 12 18:36:54 2016 kern.notice kernel: [    0.508000] mtd: device 4 (rootfs) set to be root filesystem
Fri Feb 12 18:36:54 2016 kern.notice kernel: [    0.512000] 1 squashfs-split partitions found on MTD device rootfs
Fri Feb 12 18:36:54 2016 kern.notice kernel: [    0.516000] 0x0000004a0000-0x0000007f0000 : "rootfs_data"
Fri Feb 12 18:36:54 2016 kern.notice kernel: [    0.568000] 0x0000007f0000-0x000000800000 : "board_config"
Fri Feb 12 18:36:54 2016 kern.info kernel: [    0.596000] switch0: Atheros AR8216 rev. 1 switch registered on 1e180000.etop-ff
Fri Feb 12 18:36:54 2016 kern.info kernel: [    0.636000] libphy: ltq_mii: probed
Fri Feb 12 18:36:54 2016 kern.info kernel: [    0.672000] eth0: attached PHY [Atheros AR8216/AR8236/AR8316] (phy_addr=1e180000.etop-ff:00, irq=-1)
Fri Feb 12 18:36:54 2016 kern.info kernel: [    0.680000] wdt 1f8803f0.watchdog: Init done
Fri Feb 12 18:36:54 2016 kern.info kernel: [    0.688000] TCP: cubic registered
Fri Feb 12 18:36:54 2016 kern.info kernel: [    0.692000] NET: Registered protocol family 17
Fri Feb 12 18:36:54 2016 kern.info kernel: [    0.696000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Fri Feb 12 18:36:54 2016 kern.notice kernel: [    0.708000] Bridge firewalling registered
Fri Feb 12 18:36:54 2016 kern.info kernel: [    0.712000] 8021q: 802.1Q VLAN Support v1.8
Fri Feb 12 18:36:54 2016 kern.err kernel: [    0.720000] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19
Fri Feb 12 18:36:54 2016 kern.info kernel: [    0.736000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
Fri Feb 12 18:36:54 2016 kern.info kernel: [    0.744000] Freeing unused kernel memory: 148K (8041b000 - 80440000)
Fri Feb 12 18:36:54 2016 user.info kernel: [    3.108000] init: Console is alive
Fri Feb 12 18:36:54 2016 user.info kernel: [    3.112000] init: - watchdog -
Fri Feb 12 18:36:54 2016 kern.info kernel: [    6.072000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Fri Feb 12 18:36:54 2016 kern.info kernel: [    6.080000] ehci-platform: EHCI generic platform driver
Fri Feb 12 18:36:54 2016 kern.info kernel: [    6.084000] ehci-pci: EHCI PCI platform driver
Fri Feb 12 18:36:54 2016 kern.info kernel: [    6.088000] ehci-pci 0000:00:0f.2: EHCI Host Controller
Fri Feb 12 18:36:54 2016 kern.info kernel: [    6.092000] ehci-pci 0000:00:0f.2: new USB bus registered, assigned bus number 1
Fri Feb 12 18:36:54 2016 kern.info kernel: [    6.100000] ehci-pci 0000:00:0f.2: irq 135, io mem 0x18010000
Fri Feb 12 18:36:54 2016 kern.info kernel: [    6.120000] ehci-pci 0000:00:0f.2: USB 2.0 started, EHCI 1.00
Fri Feb 12 18:36:54 2016 kern.info kernel: [    6.124000] hub 1-0:1.0: USB hub found
Fri Feb 12 18:36:54 2016 kern.info kernel: [    6.128000] hub 1-0:1.0: 4 ports detected
Fri Feb 12 18:36:54 2016 kern.info kernel: [    6.136000] uhci_hcd: USB Universal Host Controller Interface driver
Fri Feb 12 18:36:54 2016 kern.err kernel: [    6.140000] uhci_hcd 0000:00:0f.0: init 0000:00:0f.0 fail, -16
Fri Feb 12 18:36:54 2016 kern.warn kernel: [    6.148000] uhci_hcd: probe of 0000:00:0f.0 failed with error -16
Fri Feb 12 18:36:54 2016 kern.err kernel: [    6.152000] uhci_hcd 0000:00:0f.1: init 0000:00:0f.1 fail, -16
Fri Feb 12 18:36:54 2016 kern.warn kernel: [    6.156000] uhci_hcd: probe of 0000:00:0f.1 failed with error -16
Fri Feb 12 18:36:54 2016 kern.info kernel: [    6.168000] IFXUSB: ifxusb_hcd: version 3.2 B110801
Fri Feb 12 18:36:54 2016 kern.info kernel: [    6.676000] IFXUSB: USB core #0 soft-reset
Fri Feb 12 18:36:54 2016 kern.info kernel: [    6.880000] IFXUSB: USB core #0 soft-reset
Fri Feb 12 18:36:54 2016 kern.info kernel: [    6.880000] ifxusb_hcd ifxusb_hcd: IFX USB Controller
Fri Feb 12 18:36:54 2016 kern.info kernel: [    6.888000] ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 2
Fri Feb 12 18:36:54 2016 kern.info kernel: [    6.892000] ifxusb_hcd ifxusb_hcd: irq 62, io mem 0xbe101000
Fri Feb 12 18:36:54 2016 kern.warn kernel: [    6.900000] IFXUSB: Mode Mismatch Interrupt: currently in Host mode
Fri Feb 12 18:36:54 2016 kern.warn kernel: [    6.904000] IFXUSB: Mode Mismatch Interrupt: currently in Host mode
Fri Feb 12 18:36:54 2016 kern.info kernel: [    6.912000] IFXUSB: Init: Power Port (0)
Fri Feb 12 18:36:54 2016 kern.info kernel: [    6.916000] hub 2-0:1.0: USB hub found
Fri Feb 12 18:36:54 2016 kern.info kernel: [    6.920000] hub 2-0:1.0: 1 port detected
Fri Feb 12 18:36:54 2016 kern.info kernel: [    6.924000] ifxusb_hcd ifxusb_hcd: requested GPIO 464
Fri Feb 12 18:36:54 2016 kern.info kernel: [    7.300000] usb 2-1: new high-speed USB device number 2 using ifxusb_hcd
Fri Feb 12 18:36:54 2016 kern.notice kernel: [    7.756000] random: nonblocking pool is initialized
Fri Feb 12 18:36:54 2016 user.info kernel: [    7.916000] init: - preinit -
Fri Feb 12 18:36:54 2016 kern.notice kernel: [   12.120000] jffs2: notice: (355) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Fri Feb 12 18:36:54 2016 user.info kernel: [   12.144000] mount_root: switching to jffs2 overlay
Fri Feb 12 18:36:54 2016 user.info kernel: [   12.192000] procd: - early -
Fri Feb 12 18:36:54 2016 user.info kernel: [   12.192000] procd: - watchdog -
Fri Feb 12 18:36:54 2016 user.info kernel: [   13.092000] procd: - ubus -
Fri Feb 12 18:36:54 2016 user.info kernel: [   14.324000] procd: - init -
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.460000] IFXOS, Version 1.5.14 (c) Copyright 2009, Lantiq Deutschland GmbH
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.460000] 
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.492000] NET: Registered protocol family 10
Fri Feb 12 18:36:54 2016 kern.warn kernel: [   16.512000] Lantiq TAPI device driver, version 3.13.0.2, (c) 2001-2010 Lantiq Deutschland GmbH
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.524000] NET: Registered protocol family 8
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.528000] NET: Registered protocol family 20
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.540000] PPP generic driver version 2.4.2
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.556000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.580000] IFX MEI Version 5.00.00
Fri Feb 12 18:36:54 2016 kern.warn kernel: [   16.592000] Infineon CPE API Driver version: DSL CPE API V3.24.4.4
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.608000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.616000] Backport generated by backports.git backports-20150129-0-gdd4a670
Fri Feb 12 18:36:54 2016 kern.warn kernel: [   16.636000] Lantiq MIPS24KEc MPS driver, version 2.2.2.5, (c) 2006-2010 Lantiq Deutschland GmbH
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.644000] request_timer(3, 0x000001AE, 1)...successful!
Fri Feb 12 18:36:54 2016 kern.warn kernel: [   16.652000] Lantiq VMMC device driver, version 1.9.0.3, (c) 2006-2010 Lantiq Deutschland GmbH
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.660000] ip_tables: (C) 2000-2006 Netfilter Core Team
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.676000] ATM1.0.26    ATM (A1) firmware version 0.17
Fri Feb 12 18:36:54 2016 kern.warn kernel: [   16.680000] ifxmips_atm: ATM init succeed
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.696000] nf_conntrack version 0.5.0 (945 buckets, 3780 max)
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.744000] NET: Registered protocol family 24
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.756000] usbcore: registered new interface driver usbserial
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.760000] usbcore: registered new interface driver usbserial_generic
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.768000] usbserial: USB Serial support registered for generic
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.812000] xt_time: kernel timezone is -0000
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.876000] cfg80211: Calling CRDA to update world regulatory domain
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.884000] cfg80211: World regulatory domain updated:
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.888000] cfg80211:  DFS Master region: unset
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.892000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.900000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.908000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.916000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.924000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.932000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.940000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.948000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Fri Feb 12 18:36:54 2016 kern.info kernel: [   16.956000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Fri Feb 12 18:36:54 2016 kern.info kernel: [   17.136000] usbcore: registered new interface driver option
Fri Feb 12 18:36:54 2016 kern.info kernel: [   17.140000] usbserial: USB Serial support registered for GSM modem (1-port)
Fri Feb 12 18:36:54 2016 kern.info kernel: [   17.148000] option 2-1:1.0: GSM modem (1-port) converter detected
Fri Feb 12 18:36:54 2016 kern.info kernel: [   17.152000] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
Fri Feb 12 18:36:54 2016 kern.info kernel: [   17.160000] option 2-1:1.1: GSM modem (1-port) converter detected
Fri Feb 12 18:36:54 2016 kern.info kernel: [   17.164000] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
Fri Feb 12 18:36:54 2016 kern.info kernel: [   17.172000] option 2-1:1.2: GSM modem (1-port) converter detected
Fri Feb 12 18:36:54 2016 kern.info kernel: [   17.176000] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
Fri Feb 12 18:36:54 2016 kern.warn kernel: [   17.232000] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
Fri Feb 12 18:36:54 2016 kern.err kernel: [   17.236000] rt2800pci 0000:00:0e.0: failed to load eeprom property
Fri Feb 12 18:36:54 2016 kern.info kernel: [   17.244000] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT2860.eeprom'.
Fri Feb 12 18:36:54 2016 kern.info kernel: [   17.260000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3572, rev 0221 detected
Fri Feb 12 18:36:54 2016 kern.info kernel: [   17.264000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0008 detected
Fri Feb 12 18:36:54 2016 kern.debug kernel: [   17.272000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Fri Feb 12 18:36:58 2016 user.emerg syslog: 'radio0' is disabled
Fri Feb 12 18:36:58 2016 user.emerg syslog: 'radio0' is disabled
Fri Feb 12 18:37:02 2016 authpriv.info dropbear[955]: Not backgrounding
Fri Feb 12 18:37:05 2016 user.emerg syslog: setting up led dsl
Fri Feb 12 18:37:05 2016 user.emerg syslog: setting up led eth1
Fri Feb 12 18:37:05 2016 user.emerg syslog: setting up led eth2
Fri Feb 12 18:37:05 2016 user.emerg syslog: setting up led eth3
Fri Feb 12 18:37:05 2016 user.emerg syslog: setting up led eth4
Fri Feb 12 18:37:05 2016 user.emerg syslog: setting up led fxo
Fri Feb 12 18:37:05 2016 user.emerg syslog: setting up led fxs1
Fri Feb 12 18:37:05 2016 user.emerg syslog: setting up led fxs2
Fri Feb 12 18:37:05 2016 user.emerg syslog: setting up led message
Fri Feb 12 18:37:05 2016 user.emerg syslog: setting up led microphone
Fri Feb 12 18:37:05 2016 user.emerg syslog: setting up led power1
Fri Feb 12 18:37:05 2016 user.emerg syslog: setting up led voice1
Fri Feb 12 18:37:05 2016 user.emerg syslog: setting up led voice2
Fri Feb 12 18:37:05 2016 user.emerg syslog: setting up led wifi_rt
Fri Feb 12 18:37:06 2016 daemon.info procd: - init complete -
Fri Feb 12 18:37:07 2016 kern.info kernel: [   33.592000] device eth0.1 entered promiscuous mode
Fri Feb 12 18:37:07 2016 kern.info kernel: [   33.596000] device eth0 entered promiscuous mode
Fri Feb 12 18:37:07 2016 kern.info kernel: [   33.612000] br-lan: port 1(eth0.1) entered forwarding state
Fri Feb 12 18:37:07 2016 kern.info kernel: [   33.616000] br-lan: port 1(eth0.1) entered forwarding state
Fri Feb 12 18:37:07 2016 daemon.notice netifd: Interface 'lan' is enabled
Fri Feb 12 18:37:07 2016 daemon.notice netifd: Interface 'lan' is setting up now
Fri Feb 12 18:37:07 2016 daemon.notice netifd: Interface 'lan' is now up
Fri Feb 12 18:37:07 2016 daemon.notice netifd: Interface '3gwan' is setting up now
Fri Feb 12 18:37:07 2016 daemon.notice netifd: Interface 'WAN' is enabled
Fri Feb 12 18:37:07 2016 daemon.notice netifd: Interface 'loopback' is enabled
Fri Feb 12 18:37:07 2016 daemon.notice netifd: Interface 'loopback' is setting up now
Fri Feb 12 18:37:07 2016 daemon.notice netifd: Interface 'loopback' is now up
Fri Feb 12 18:37:07 2016 daemon.notice netifd: Bridge 'br-lan' link is up
Fri Feb 12 18:37:07 2016 daemon.notice netifd: Interface 'lan' has link connectivity 
Fri Feb 12 18:37:07 2016 daemon.notice netifd: Network device 'eth0' link is up
Fri Feb 12 18:37:07 2016 daemon.notice netifd: VLAN 'eth0.2' link is up
Fri Feb 12 18:37:07 2016 daemon.notice netifd: Interface 'WAN' has link connectivity 
Fri Feb 12 18:37:07 2016 daemon.notice netifd: Interface 'WAN' is setting up now
Fri Feb 12 18:37:07 2016 daemon.notice netifd: VLAN 'eth0.1' link is up
Fri Feb 12 18:37:07 2016 daemon.notice netifd: Network device 'lo' link is up
Fri Feb 12 18:37:07 2016 daemon.notice netifd: Interface 'loopback' has link connectivity 
Fri Feb 12 18:37:08 2016 daemon.notice netifd: WAN (1094): udhcpc (v1.23.2) started
Fri Feb 12 18:37:09 2016 daemon.notice netifd: WAN (1094): Sending discover...
Fri Feb 12 18:37:09 2016 daemon.notice netifd: WAN (1094): Sending select for 192.168.64.244...
Fri Feb 12 18:37:09 2016 daemon.notice netifd: WAN (1094): Lease of 192.168.64.244 obtained, lease time 43200
Fri Feb 12 18:37:09 2016 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Fri Feb 12 18:37:09 2016 kern.info kernel: [   35.620000] br-lan: port 1(eth0.1) entered forwarding state
Fri Feb 12 18:37:09 2016 daemon.notice netifd: Interface 'WAN' is now up
Fri Feb 12 18:37:10 2016 kern.info kernel: [   36.748000] Atheros AR8216/AR8236/AR8316 1e180000.etop-ff:00: Port 2 is up
Fri Feb 12 18:37:10 2016 kern.info kernel: [   36.752000] Atheros AR8216/AR8236/AR8316 1e180000.etop-ff:00: Port 3 is up
Fri Feb 12 18:37:17 2016 daemon.info dnsmasq[1151]: started, version 2.73 cachesize 150
Fri Feb 12 18:37:17 2016 daemon.info dnsmasq[1151]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Fri Feb 12 18:37:17 2016 daemon.info dnsmasq[1151]: DNS service limited to local subnets
Fri Feb 12 18:37:17 2016 daemon.info dnsmasq-dhcp[1151]: DHCP, IP range 192.168.32.100 -- 192.168.32.249, lease time 12h
Fri Feb 12 18:37:17 2016 daemon.info dnsmasq[1151]: using local addresses only for domain lan
Fri Feb 12 18:37:17 2016 daemon.info dnsmasq[1151]: reading /tmp/resolv.conf.auto
Fri Feb 12 18:37:17 2016 daemon.info dnsmasq[1151]: using local addresses only for domain lan
Fri Feb 12 18:37:17 2016 daemon.info dnsmasq[1151]: using nameserver 192.168.64.1#53
Fri Feb 12 18:37:17 2016 daemon.info dnsmasq[1151]: read /etc/hosts - 1 addresses
Fri Feb 12 18:37:17 2016 daemon.info dnsmasq[1151]: read /tmp/hosts/dhcp - 1 addresses
Fri Feb 12 18:37:17 2016 daemon.info dnsmasq-dhcp[1151]: read /etc/ethers - 0 addresses
Fri Feb 12 18:37:17 2016 daemon.info dnsmasq-dhcp[1151]: DHCPREQUEST(br-lan) 192.168.32.237 d4:be:d9:7e:1d:af 
Fri Feb 12 18:37:17 2016 daemon.info dnsmasq-dhcp[1151]: DHCPACK(br-lan) 192.168.32.237 d4:be:d9:7e:1d:af MC0QZTUC
Fri Feb 12 18:37:22 2016 daemon.info dnsmasq-dhcp[1151]: DHCPINFORM(br-lan) 192.168.32.237 d4:be:d9:7e:1d:af 
Fri Feb 12 18:37:22 2016 daemon.info dnsmasq-dhcp[1151]: DHCPACK(br-lan) 192.168.32.237 d4:be:d9:7e:1d:af MC0QZTUC
Fri Feb 12 18:37:25 2016 user.notice firewall: Reloading firewall due to ifup of WAN (eth0.2)
Fri Feb 12 18:37:36 2016 daemon.err uhttpd[996]: killall: dsl_cpe_control: no process killed

[    0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 17:16:20 CEST 2015
[    0.000000] SoC: Danube rev 1.5
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019641 (MIPS 24KEc)
[    0.000000] MIPS: machine is ARV752DPW22 - Arcor 803
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 803fc2f0, node_mem_map 81007940
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=0005b7e0
[    0.000000] Readback ErrCtl register=0005b7e0
[    0.000000] Memory: 60336K/65536K available (3475K kernel code, 154K rwdata, 556K rodata, 148K init, 195K bss, 5200K reserved)
[    0.000000] NR_IRQS:256
[    0.000000] CPU Clock: 333MHz
[    0.040000] Calibrating delay loop... 221.18 BogoMIPS (lpj=442368)
[    0.040000] pid_max: default: 32768 minimum: 301
[    0.044000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.048000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.056000] pinctrl core: initialized pinctrl subsystem
[    0.064000] NET: Registered protocol family 16
[    0.076000] pinctrl-xway 1e100b10.pinmux: Init done
[    0.080000] dma-xway 1e104100.dma: Init done - hw rev: 3, ports: 5, channels: 20
[    0.088000] PCI host bridge /fpi@10000000/pci@E105400 ranges:
[    0.092000]  MEM 0x0000000018000000..0x0000000019ffffff
[    0.096000]   IO 0x000000001ae00000..0x000000001affffff
[    0.112000] usbcore: registered new interface driver usbfs
[    0.116000] usbcore: registered new interface driver hub
[    0.120000] usbcore: registered new device driver usb
[    0.124000] PCI host bridge to bus 0000:00
[    0.128000] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
[    0.132000] pci_bus 0000:00: root bus resource [io  0xffffffff]
[    0.136000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.140000] pci 0000:00:0e.0: [1814:3592] type 00 class 0x028000
[    0.140000] pci 0000:00:0e.0: reg 0x10: [mem 0xffff0000-0xffffffff]
[    0.140000] pci 0000:00:0f.0: [1106:3038] type 00 class 0x0c0300
[    0.140000] pci 0000:00:0f.0: reg 0x20: [io  0xfce0-0xfcff]
[    0.140000] pci 0000:00:0f.0: supports D1 D2
[    0.140000] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot
[    0.140000] pci 0000:00:0f.1: [1106:3038] type 00 class 0x0c0300
[    0.140000] pci 0000:00:0f.1: reg 0x20: [io  0xfce0-0xfcff]
[    0.140000] pci 0000:00:0f.1: supports D1 D2
[    0.140000] pci 0000:00:0f.1: PME# supported from D0 D1 D2 D3hot
[    0.140000] pci 0000:00:0f.2: [1106:3104] type 00 class 0x0c0320
[    0.140000] pci 0000:00:0f.2: reg 0x10: [mem 0x00000000-0x000000ff]
[    0.140000] pci 0000:00:0f.2: supports D1 D2
[    0.140000] pci 0000:00:0f.2: PME# supported from D0 D1 D2 D3hot
[    0.140000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.140000] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
[    0.144000] pci 0000:00:0f.2: BAR 0: assigned [mem 0x18010000-0x180100ff]
[    0.148000] pci 0000:00:0f.0: BAR 4: no space for [io  size 0x0020]
[    0.152000] pci 0000:00:0f.0: BAR 4: failed to assign [io  size 0x0020]
[    0.156000] pci 0000:00:0f.1: BAR 4: no space for [io  size 0x0020]
[    0.160000] pci 0000:00:0f.1: BAR 4: failed to assign [io  size 0x0020]
[    0.164000] Switched to clocksource MIPS
[    0.168000] NET: Registered protocol family 2
[    0.176000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.184000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.188000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.196000] TCP: reno registered
[    0.200000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.204000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.212000] NET: Registered protocol family 1
[    0.216000] PCI: Enabling device 0000:00:0f.2 (0000 -> 0002)
[    0.220000] PCI: CLS 0 bytes, default 32
[    0.220000] gptu: totally 6 16-bit timers/counters
[    0.228000] gptu: misc_register on minor 63
[    0.232000] gptu: succeeded to request irq 126
[    0.236000] gptu: succeeded to request irq 127
[    0.240000] gptu: succeeded to request irq 128
[    0.244000] gptu: succeeded to request irq 129
[    0.248000] gptu: succeeded to request irq 130
[    0.252000] gptu: succeeded to request irq 131
[    0.264000] lantiq,vmmc 1f103000.vmmc: requested GPIO 465
[    0.272000] lantiq,vmmc 1f103000.vmmc: reserved 1MB at 0x03a00000
[    0.276000] ralink,eeprom ralink_eep: using RT2860.eeprom as eeprom
[    0.284000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.292000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.300000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.324000] msgmni has been set to 117
[    0.332000] io scheduler noop registered
[    0.336000] io scheduler deadline registered (default)
[    0.344000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
[    0.352000] console [ttyLTQ0] enabled
[    0.360000] bootconsole [early0] disabled
[    0.368000] lantiq nor flash device: 00800000 at 10000000
[    0.372000] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb
[    0.380000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.388000]   Amd/Fujitsu Extended Query version 1.1.
[    0.392000] number of CFI chips: 1
[    0.396000] 4 ofpart partitions found on MTD device ltq_nor
[    0.400000] Creating 4 MTD partitions on "ltq_nor":
[    0.404000] 0x000000000000-0x000000030000 : "uboot"
[    0.412000] 0x000000030000-0x000000040000 : "uboot_env"
[    0.416000] 0x000000040000-0x0000007f0000 : "firmware"
[    0.488000] 2 uimage-fw partitions found on MTD device firmware
[    0.496000] 0x000000040000-0x0000001a0d4d : "kernel"
[    0.500000] 0x0000001a0d4d-0x0000007f0000 : "rootfs"
[    0.508000] mtd: device 4 (rootfs) set to be root filesystem
[    0.512000] 1 squashfs-split partitions found on MTD device rootfs
[    0.516000] 0x0000004a0000-0x0000007f0000 : "rootfs_data"
[    0.568000] 0x0000007f0000-0x000000800000 : "board_config"
[    0.596000] switch0: Atheros AR8216 rev. 1 switch registered on 1e180000.etop-ff
[    0.636000] libphy: ltq_mii: probed
[    0.672000] eth0: attached PHY [Atheros AR8216/AR8236/AR8316] (phy_addr=1e180000.etop-ff:00, irq=-1)
[    0.680000] wdt 1f8803f0.watchdog: Init done
[    0.688000] TCP: cubic registered
[    0.692000] NET: Registered protocol family 17
[    0.696000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    0.708000] Bridge firewalling registered
[    0.712000] 8021q: 802.1Q VLAN Support v1.8
[    0.720000] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19
[    0.736000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    0.744000] Freeing unused kernel memory: 148K (8041b000 - 80440000)
[    3.108000] init: Console is alive
[    3.112000] init: - watchdog -
[    6.072000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.080000] ehci-platform: EHCI generic platform driver
[    6.084000] ehci-pci: EHCI PCI platform driver
[    6.088000] ehci-pci 0000:00:0f.2: EHCI Host Controller
[    6.092000] ehci-pci 0000:00:0f.2: new USB bus registered, assigned bus number 1
[    6.100000] ehci-pci 0000:00:0f.2: irq 135, io mem 0x18010000
[    6.120000] ehci-pci 0000:00:0f.2: USB 2.0 started, EHCI 1.00
[    6.124000] hub 1-0:1.0: USB hub found
[    6.128000] hub 1-0:1.0: 4 ports detected
[    6.136000] uhci_hcd: USB Universal Host Controller Interface driver
[    6.140000] uhci_hcd 0000:00:0f.0: init 0000:00:0f.0 fail, -16
[    6.148000] uhci_hcd: probe of 0000:00:0f.0 failed with error -16
[    6.152000] uhci_hcd 0000:00:0f.1: init 0000:00:0f.1 fail, -16
[    6.156000] uhci_hcd: probe of 0000:00:0f.1 failed with error -16
[    6.168000] IFXUSB: ifxusb_hcd: version 3.2 B110801
[    6.676000] IFXUSB: USB core #0 soft-reset
[    6.880000] IFXUSB: USB core #0 soft-reset
[    6.880000] ifxusb_hcd ifxusb_hcd: IFX USB Controller
[    6.888000] ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 2
[    6.892000] ifxusb_hcd ifxusb_hcd: irq 62, io mem 0xbe101000
[    6.900000] IFXUSB: Mode Mismatch Interrupt: currently in Host mode
[    6.904000] IFXUSB: Mode Mismatch Interrupt: currently in Host mode
[    6.912000] IFXUSB: Init: Power Port (0)
[    6.916000] hub 2-0:1.0: USB hub found
[    6.920000] hub 2-0:1.0: 1 port detected
[    6.924000] ifxusb_hcd ifxusb_hcd: requested GPIO 464
[    7.300000] usb 2-1: new high-speed USB device number 2 using ifxusb_hcd
[    7.756000] random: nonblocking pool is initialized
[    7.916000] init: - preinit -
[   12.120000] jffs2: notice: (355) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   12.144000] mount_root: switching to jffs2 overlay
[   12.192000] procd: - early -
[   12.192000] procd: - watchdog -
[   13.092000] procd: - ubus -
[   14.324000] procd: - init -
[   16.460000] IFXOS, Version 1.5.14 (c) Copyright 2009, Lantiq Deutschland GmbH
[   16.460000] 
[   16.492000] NET: Registered protocol family 10
[   16.512000] Lantiq TAPI device driver, version 3.13.0.2, (c) 2001-2010 Lantiq Deutschland GmbH
[   16.524000] NET: Registered protocol family 8
[   16.528000] NET: Registered protocol family 20
[   16.540000] PPP generic driver version 2.4.2
[   16.556000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   16.580000] IFX MEI Version 5.00.00
[   16.592000] Infineon CPE API Driver version: DSL CPE API V3.24.4.4
[   16.608000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
[   16.616000] Backport generated by backports.git backports-20150129-0-gdd4a670
[   16.636000] Lantiq MIPS24KEc MPS driver, version 2.2.2.5, (c) 2006-2010 Lantiq Deutschland GmbH
[   16.644000] request_timer(3, 0x000001AE, 1)...successful!
[   16.652000] Lantiq VMMC device driver, version 1.9.0.3, (c) 2006-2010 Lantiq Deutschland GmbH
[   16.660000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   16.676000] ATM1.0.26    ATM (A1) firmware version 0.17
[   16.680000] ifxmips_atm: ATM init succeed
[   16.696000] nf_conntrack version 0.5.0 (945 buckets, 3780 max)
[   16.744000] NET: Registered protocol family 24
[   16.756000] usbcore: registered new interface driver usbserial
[   16.760000] usbcore: registered new interface driver usbserial_generic
[   16.768000] usbserial: USB Serial support registered for generic
[   16.812000] xt_time: kernel timezone is -0000
[   16.876000] cfg80211: Calling CRDA to update world regulatory domain
[   16.884000] cfg80211: World regulatory domain updated:
[   16.888000] cfg80211:  DFS Master region: unset
[   16.892000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   16.900000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   16.908000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   16.916000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   16.924000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   16.932000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   16.940000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   16.948000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   16.956000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   17.136000] usbcore: registered new interface driver option
[   17.140000] usbserial: USB Serial support registered for GSM modem (1-port)
[   17.148000] option 2-1:1.0: GSM modem (1-port) converter detected
[   17.152000] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
[   17.160000] option 2-1:1.1: GSM modem (1-port) converter detected
[   17.164000] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
[   17.172000] option 2-1:1.2: GSM modem (1-port) converter detected
[   17.176000] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
[   17.232000] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
[   17.236000] rt2800pci 0000:00:0e.0: failed to load eeprom property
[   17.244000] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT2860.eeprom'.
[   17.260000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3572, rev 0221 detected
[   17.264000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0008 detected
[   17.272000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   33.592000] device eth0.1 entered promiscuous mode
[   33.596000] device eth0 entered promiscuous mode
[   33.612000] br-lan: port 1(eth0.1) entered forwarding state
[   33.616000] br-lan: port 1(eth0.1) entered forwarding state
[   35.620000] br-lan: port 1(eth0.1) entered forwarding state
[   36.748000] Atheros AR8216/AR8236/AR8316 1e180000.etop-ff:00: Port 2 is up
[   36.752000] Atheros AR8216/AR8236/AR8316 1e180000.etop-ff:00: Port 3 is up

Gdy próbuje podnieść recznie interfejs

Fri Feb 12 18:57:37 2016 daemon.notice netifd: Interface '3gwan' is now down
Fri Feb 12 18:57:37 2016 daemon.notice netifd: Interface '3gwan' is setting up now

i to tyle...

7 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,877

Odp: Arcor 803 i E3131

uci show network pokaż.
Bo w pierwszym logu się połączył.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

8 Odpowiedź przez raw

  • raw
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-09-01
  • Posty: 41

Odp: Arcor 803 i E3131

network.loopback=interface
network.loopback.ifname='lo'
network.loopback.proto='static'
network.loopback.ipaddr='127.0.0.1'
network.loopback.netmask='255.0.0.0'
network.globals=globals
network.globals.ula_prefix='fd9a:6b19:3b58::/48'
network.lan=interface
network.lan.force_link='1'
network.lan.type='bridge'
network.lan.proto='static'
network.lan.ipaddr='192.168.32.1'
network.lan.netmask='255.255.255.0'
network.lan.ip6assign='60'
network.lan.ifname='eth0.1'
network.@switch[0]=switch
network.@switch[0].name='switch0'
network.@switch[0].reset='1'
network.@switch[0].enable_vlan='1'
network.@switch[0].mirror_source_port='0'
network.@switch[0].mirror_monitor_port='0'
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device='switch0'
network.@switch_vlan[0].vlan='1'
network.@switch_vlan[0].ports='0t 3 4 5'
network.@switch_vlan[0].vid='1'
network.@switch_vlan[1]=switch_vlan
network.@switch_vlan[1].device='switch0'
network.@switch_vlan[1].vlan='2'
network.@switch_vlan[1].vid='2'
network.@switch_vlan[1].ports='0t 2'
network.WAN=interface
network.WAN.proto='dhcp'
network.WAN.ifname='eth0.2'
network.3gwan=interface
network.3gwan.proto='3g'
network.3gwan.service='umts'
network.3gwan.device='/dev/ttyUSB0'
network.3gwan.apn='internet'
network.3gwan.pincode='0493'
network.3gwan.username='internet'
network.3gwan.password='internet'
network.3gwan.delegate='0'

Co prawda tutaj jest inny pin ale to ze wzgledu na moj drugi modem (tez hauwei)

Co zauwazyłem - po podlaczeniu modemu rosnie load. Top pokazuje:

Mem: 22760K used, 37724K free, 520K shrd, 2292K buff, 7528K cached
CPU:   0% usr   0% sys   0% nic  76% idle   0% io   0% irq  22% sirq
Load average: 1.18 0.62 0.29 1/38 3031
  PID  PPID USER     STAT   VSZ %VSZ %CPU COMMAND
 3031  2135 root     R     1360   2%   1% top
   19     2 root     SW       0   0%   1% [kworker/0:1]
 2134   890 root     S     1216   2%   0% /usr/sbin/dropbear -F -P /var/run/dro
  819     1 root     S     1564   3%   0% /sbin/netifd
  931     1 root     S     1544   3%   0% /usr/sbin/uhttpd -f -h /www -r OpenWr
  781     1 root     S     1528   3%   0% /sbin/rpcd
 2748   819 root     S     1428   2%   0% {3g.sh} /bin/sh ./3g.sh 3g setup 3gwa
    1     0 root     S     1404   2%   0% /sbin/procd
 2135  2134 root     S     1364   2%   0% -ash
  983     1 root     S     1360   2%   0% /usr/sbin/ntpd -n -S /usr/sbin/ntpd-h
 1047   819 root     S     1356   2%   0% udhcpc -p /var/run/udhcpc-eth0.2.pid
  853     1 root     S     1156   2%   0% /usr/sbin/odhcpd
  890     1 root     S     1148   2%   0% /usr/sbin/dropbear -F -P /var/run/dro
  772     1 root     S     1040   2%   0% /sbin/logd -S 16
 1106     1 nobody   S      932   2%   0% /usr/sbin/dnsmasq -C /var/etc/dnsmasq
  403     1 root     S      888   1%   0% /sbin/ubusd
  418     1 root     S      768   1%   0% /sbin/askfirst /bin/ash --login
  265     2 root     SW       0   0%   0% [kworker/u2:2]
    3     2 root     RW       0   0%   0% [ksoftirqd/0]
    6     2 root     SW       0   0%   0% [kworker/u2:0]

9 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,877

Odp: Arcor 803 i E3131

ifstatus 3gwan pokaż.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

10 Odpowiedź przez raw

  • raw
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-09-01
  • Posty: 41

Odp: Arcor 803 i E3131

{
        "up": false,
        "pending": true,
        "available": true,
        "autostart": true,
        "proto": "3g",
        "data": {

        }
}

11 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,877

Odp: Arcor 803 i E3131

Wg systemu czeka na połączenie po prostu.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

12 Odpowiedź przez raw

  • raw
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-09-01
  • Posty: 41

Odp: Arcor 803 i E3131

To dziwne, w sumie odpaliłem openwrt na wirtualce i działa... Co moze byc przyczyna tego oczekiwania?

13 Odpowiedź przez raw

  • raw
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-09-01
  • Posty: 41

Odp: Arcor 803 i E3131

Maly update - po podlaczeniu routera do modemu miga ona na zielono, gdy jest polaczony do kompa - na niebiesko. Problem z inicjalizacja?

14 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,877

Odp: Arcor 803 i E3131

W ogóle nie złapał zasięgu.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

15 Odpowiedź przez raw (edytowany przez raw 2016-02-12 21:46:26)

  • raw
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-09-01
  • Posty: 41

Odp: Arcor 803 i E3131

root@OpenWrt:~# gcom -d /dev/ttyUSB0

Enter PIN number: 0493
Waiting for Registration..(120 sec max)....
Registered on Home network: "Orange",2
Signal Quality: 19,99

Tylko jak teraz "wyjsc" z gcom'a?

16 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,877

Odp: Arcor 803 i E3131

ctrl-c?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

17 Odpowiedź przez raw

  • raw
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2013-09-01
  • Posty: 41

Odp: Arcor 803 i E3131

niestety jakby wisial... 

root@OpenWrt:~# gcom -d /dev/ttyUSB0

Enter PIN number: 0493
Waiting for Registration..(120 sec max)....
Registered on Home network: "Orange",2
Signal Quality: 19,99
^C^C^C^C
^C^C^C
^C
^[^[^[

18 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,877

Odp: Arcor 803 i E3131

Reboot zrób po prostu.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona