Jest super , jest kontroler , jest usb , jest wifi 
, coś tam się rzuca na koniec , no i root filesystem jakbyś mógł zrobić większy (karte mam 4gb , więc roota można by 3.5 zrobić a reszte dać na swap)
zobacz dmesg :
Linux version 2.6.32.27 (cezary@eko.one.pl) (gcc version 4.1.2) #3 Wed Jan 19 20:04:08 CET 2011
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001eff0000 (usable)
BIOS-e820: 000000001eff0000 - 000000001eff3000 (ACPI NVS)
BIOS-e820: 000000001eff3000 - 000000001f000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
DMI 2.2 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0x1eff0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping: 0000000000000000-000000001eff0000
ACPI: RSDP 000f6d80 00014 (v00 AWARD )
ACPI: RSDT 1eff3040 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 1eff30c0 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 1eff3180 03773 (v01 AWARD AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 1eff0000 00040
ACPI: SSDT 1eff69c0 000D6 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
495MB LOWMEM available.
mapped low ram: 0 - 1eff0000
low ram: 0 - 1eff0000
node 0 low ram: 00000000 - 1eff0000
node 0 bootmap 00011000 - 00014e00
(6 early reservations) ==> bootmem [0000000000 - 001eff0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0001000000 - 0001334080] TEXT DATA BSS ==> [0001000000 - 0001334080]
#2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#3 [0001335000 - 000133b164] BRK ==> [0001335000 - 000133b164]
#4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#5 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0001eff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0001eff0
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
Found and enabled local APIC!
Allocating PCI resources starting at 1f000000 (gap: 1f000000:dfc00000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125855
Kernel command line: root=/dev/sda2 rootfstype=ext2 rootwait console=tty0 console=ttyS0,38400n8 noinitrd reboot=bios
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Memory: 499512k/507840k available (2181k kernel code, 7700k reserved, 676k data, 296k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB)
vmalloc : 0xdf7f0000 - 0xfffa1000 ( 519 MB)
lowmem : 0xc0000000 - 0xdeff0000 ( 495 MB)
.init : 0xc12cb000 - 0xc1315000 ( 296 kB)
.data : 0xc122141d - 0xc12ca480 ( 676 kB)
.text : 0xc1000000 - 0xc122141d (2181 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:288
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Fast TSC calibration using PIT
Detected 1000.116 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.23 BogoMIPS (lpj=10001160)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
mce: CPU supports 4 MCE banks
CPU: AMD Athlon(tm) Processor stepping 01
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090903
ACPI: setting ELCR to 0200 (from 8e28)
Enabling APIC mode: Flat. Using 0 I/O APICs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfaa80, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: Enabling SiS 96x SMBus
pci 0000:00:02.5: PME# supported from D3cold
pci 0000:00:02.5: PME# disabled
pci 0000:00:02.7: PME# supported from D3hot D3cold
pci 0000:00:02.7: PME# disabled
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 9 10 11 12 14 15)
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0xcc000-0xcffff has been reserved
system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
system 00:00: iomem range 0xfc000-0xfffff could not be reserved
system 00:00: iomem range 0x1eff0000-0x1effffff could not be reserved
system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0x100000-0x1efeffff could not be reserved
system 00:00: iomem range 0xffee0000-0xffefffff has been reserved
system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved
system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved
system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x294-0x297 has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xd000-0xdfff
pci 0000:00:01.0: MEM window: 0xec000000-0xec0fffff
pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xe7ffffff
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:03.3: EHCI: BIOS handoff failed (BIOS bug?) 01010001
scx200: NatSemi SCx200 Driver
microcode: no support for this CPU vendor
------------[ cut here ]------------
WARNING: at arch/x86/mm/ioremap.c:148 0xc1019a28()
Hardware name: FUTRO S400
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.32.27 #3
Call Trace:
[<c1019a28>] ? 0xc1019a28
[<c102276f>] ? 0xc102276f
[<c1019a28>] ? 0xc1019a28
[<c10227b3>] ? 0xc10227b3
[<c1019a28>] ? 0xc1019a28
[<c102882a>] ? 0xc102882a
[<c12dc5f0>] ? 0xc12dc5f0
[<c1019d54>] ? 0xc1019d54
[<c12dc60f>] ? 0xc12dc60f
[<c12dc60f>] ? 0xc12dc60f
[<c12dc5ba>] ? 0xc12dc5ba
[<c1001062>] ? 0xc1001062
[<c12cb53a>] ? 0xc12cb53a
[<c12cb4a0>] ? 0xc12cb4a0
[<c1003327>] ? 0xc1003327
---[ end trace a7919e7f17c0a725 ]---
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY) Š 2001-2006 Red Hat, Inc.
msgmni has been set to 975
io scheduler noop registered
io scheduler deadline registered (default)
processor LNXCPU:00: registered as cooling_device0
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (0 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12b
Non-volatile memory driver v1.3
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
pata_sis 0000:00:02.5: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
scsi0 : pata_sis
scsi1 : pata_sis
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
TCP westwood registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata1.01: CFA: SanDisk SDCFX3-004G, HDX 4.32, max UDMA/66
ata1.01: 8027712 sectors, multi 0: LBA
ata1.01: configured for UDMA/66
scsi 0:0:1:0: Direct-Access ATA SanDisk SDCFX3-0 HDX PQ: 0 ANSI: 5
sd 0:0:1:0: [sda] 8027712 512-byte logical blocks: (4.11 GB/3.82 GiB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:1:0: [sda] Attached SCSI removable disk
VFS: Mounted root (ext2 filesystem) readonly on device 8:2.
Freeing unused kernel memory: 296k freed
Please be patient, while OpenWrt loads ...
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
- init -
Please press Enter to activate this console. Compat-wireless backport release: compat-wireless-2011-01-06
Backport based on wireless-testing.git master-2011-01-05
cfg80211: Calling CRDA to update world regulatory domain
Uniform Multi-Platform E-IDE driver
natsemi dp8381x driver, version 2.1, Sept 11, 2006
originally by Donald Becker <becker@scyld.com>
2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ath9k 0000:00:07.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Registered led device: ath9k-phy0
ieee80211 phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xdfae0000, irq=11
cfg80211: Calling CRDA for country: CN
PPP generic driver version 2.4.2
cfg80211: Regulatory domain changed to country: CN
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
ide-gd driver 1.18
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 3
ehci_hcd 0000:00:03.3: PCI INT D -> Link[LNKH] -> GSI 3 (level, low) -> IRQ 3
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: irq 3, io mem 0xec130000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
nf_conntrack version 0.5.0 (7812 buckets, 31248 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
8139too Fast Ethernet driver 0.9.28
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ath_hal: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
ath_hal: 2009-05-08 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, REGOPS_FUNC, XR)
ath_pci: trunk
wlan: trunk
wlan: mac acl policy registered
ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (trunk)
ath_rate_minstrel: look around rate set to 10%
ath_rate_minstrel: EWMA rolloff level set to 75%
ath_rate_minstrel: max segment size in the mrr set to 6000 us
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 15
r8169 0000:00:09.0: PCI INT A -> Link[LNKD] -> GSI 15 (level, low) -> IRQ 15
r8169 0000:00:09.0: no PCI Express capability
eth0: RTL8169sb/8110sb at 0xdff68000, 00:90:dc:06:a9:20, XID 10000000 IRQ 15
r8169: eth0: link down
sis900.c: v1.08.10 Apr. 2 2006
device eth0 entered promiscuous mode
sky2 driver version 1.25
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 15
ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKE] -> GSI 15 (level, low) -> IRQ 15
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 15, io mem 0xec131000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9
ohci_hcd 0000:00:03.1: PCI INT B -> Link[LNKF] -> GSI 9 (level, low) -> IRQ 9
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 9, io mem 0xec133000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 2142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 2142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 2142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3141
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 2143
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 2143
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3141
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3141
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3141
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3141
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3141
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3141
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 2143
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 4141
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 4141
Remounting filesystem read-only
BusyBox v1.15.EXT2-fs error (device sda2): ext2_lookup: 3 (2011-01-18 17deleted inode referenced: 4141:22:51 CET) buil
t-in shell (ash)Remounting filesystem read-only
Enter 'help' fEXT2-fs error (device sda2): ext2_lookup: or a list of buideleted inode referenced: 4141lt-in commands.
Remounting filesystem read-only
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || EXT2-fs error (device sda2): ext2_lookup: _|| _|
|___deleted inode referenced: 4141____|| __|____
_|__|__||_______Remounting filesystem read-only
_||__| |____|
EXT2-fs error (device sda2): ext2_lookup: |__| Wdeleted inode referenced: 4141 I R E L E S S
F R E E D O M
Remounting filesystem read-only
Backfire (10.03.x, latest version. Always.) -------
* 1/3 shot Kahlua In a shot glass, layer Kahlua
* 1/3 shot Bailey's on the bottoEXT2-fs error (device sda2): ext2_lookup: m, then Bailey'sdeleted inode referenced: 4141,
* 1/3 shot
Vodka then Remounting filesystem read-only
Vodka.
----------( by obsy, http://eko.one.pl/ )----------
root@OpenWrt:/# EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 4141
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 4141
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 4141
Remounting filesystem read-only
root@OpenWrt:/#
Linux version 2.6.32.27 (cezary@eko.one.pl) (gcc version 4.1.2) #3 Wed Jan 19 20:04:08 CET 2011
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001eff0000 (usable)
BIOS-e820: 000000001eff0000 - 000000001eff3000 (ACPI NVS)
BIOS-e820: 000000001eff3000 - 000000001f000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
DMI 2.2 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0x1eff0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping: 0000000000000000-000000001eff0000
ACPI: RSDP 000f6d80 00014 (v00 AWARD )
ACPI: RSDT 1eff3040 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 1eff30c0 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 1eff3180 03773 (v01 AWARD AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 1eff0000 00040
ACPI: SSDT 1eff69c0 000D6 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
495MB LOWMEM available.
mapped low ram: 0 - 1eff0000
low ram: 0 - 1eff0000
node 0 low ram: 00000000 - 1eff0000
node 0 bootmap 00011000 - 00014e00
(6 early reservations) ==> bootmem [0000000000 - 001eff0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0001000000 - 0001334080] TEXT DATA BSS ==> [0001000000 - 0001334080]
#2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#3 [0001335000 - 000133b164] BRK ==> [0001335000 - 000133b164]
#4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#5 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0001eff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0001eff0
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
Found and enabled local APIC!
Allocating PCI resources starting at 1f000000 (gap: 1f000000:dfc00000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125855
Kernel command line: root=/dev/sda2 rootfstype=ext2 rootwait console=tty0 console=ttyS0,38400n8 noinitrd reboot=bios
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Memory: 499512k/507840k available (2181k kernel code, 7700k reserved, 676k data, 296k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB)
vmalloc : 0xdf7f0000 - 0xfffa1000 ( 519 MB)
lowmem : 0xc0000000 - 0xdeff0000 ( 495 MB)
.init : 0xc12cb000 - 0xc1315000 ( 296 kB)
.data : 0xc122141d - 0xc12ca480 ( 676 kB)
.text : 0xc1000000 - 0xc122141d (2181 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:288
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Fast TSC calibration using PIT
Detected 1000.116 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.23 BogoMIPS (lpj=10001160)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
mce: CPU supports 4 MCE banks
CPU: AMD Athlon(tm) Processor stepping 01
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090903
ACPI: setting ELCR to 0200 (from 8e28)
Enabling APIC mode: Flat. Using 0 I/O APICs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfaa80, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: Enabling SiS 96x SMBus
pci 0000:00:02.5: PME# supported from D3cold
pci 0000:00:02.5: PME# disabled
pci 0000:00:02.7: PME# supported from D3hot D3cold
pci 0000:00:02.7: PME# disabled
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 9 10 11 12 14 15)
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0xcc000-0xcffff has been reserved
system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
system 00:00: iomem range 0xfc000-0xfffff could not be reserved
system 00:00: iomem range 0x1eff0000-0x1effffff could not be reserved
system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0x100000-0x1efeffff could not be reserved
system 00:00: iomem range 0xffee0000-0xffefffff has been reserved
system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved
system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved
system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x294-0x297 has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xd000-0xdfff
pci 0000:00:01.0: MEM window: 0xec000000-0xec0fffff
pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xe7ffffff
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:03.3: EHCI: BIOS handoff failed (BIOS bug?) 01010001
scx200: NatSemi SCx200 Driver
microcode: no support for this CPU vendor
------------[ cut here ]------------
WARNING: at arch/x86/mm/ioremap.c:148 0xc1019a28()
Hardware name: FUTRO S400
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.32.27 #3
Call Trace:
[<c1019a28>] ? 0xc1019a28
[<c102276f>] ? 0xc102276f
[<c1019a28>] ? 0xc1019a28
[<c10227b3>] ? 0xc10227b3
[<c1019a28>] ? 0xc1019a28
[<c102882a>] ? 0xc102882a
[<c12dc5f0>] ? 0xc12dc5f0
[<c1019d54>] ? 0xc1019d54
[<c12dc60f>] ? 0xc12dc60f
[<c12dc60f>] ? 0xc12dc60f
[<c12dc5ba>] ? 0xc12dc5ba
[<c1001062>] ? 0xc1001062
[<c12cb53a>] ? 0xc12cb53a
[<c12cb4a0>] ? 0xc12cb4a0
[<c1003327>] ? 0xc1003327
---[ end trace a7919e7f17c0a725 ]---
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY) Š 2001-2006 Red Hat, Inc.
msgmni has been set to 975
io scheduler noop registered
io scheduler deadline registered (default)
processor LNXCPU:00: registered as cooling_device0
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (0 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12b
Non-volatile memory driver v1.3
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
pata_sis 0000:00:02.5: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
scsi0 : pata_sis
scsi1 : pata_sis
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
TCP westwood registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata1.01: CFA: SanDisk SDCFX3-004G, HDX 4.32, max UDMA/66
ata1.01: 8027712 sectors, multi 0: LBA
ata1.01: configured for UDMA/66
scsi 0:0:1:0: Direct-Access ATA SanDisk SDCFX3-0 HDX PQ: 0 ANSI: 5
sd 0:0:1:0: [sda] 8027712 512-byte logical blocks: (4.11 GB/3.82 GiB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:1:0: [sda] Attached SCSI removable disk
VFS: Mounted root (ext2 filesystem) readonly on device 8:2.
Freeing unused kernel memory: 296k freed
Please be patient, while OpenWrt loads ...
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
- init -
Please press Enter to activate this console. Compat-wireless backport release: compat-wireless-2011-01-06
Backport based on wireless-testing.git master-2011-01-05
cfg80211: Calling CRDA to update world regulatory domain
Uniform Multi-Platform E-IDE driver
natsemi dp8381x driver, version 2.1, Sept 11, 2006
originally by Donald Becker <becker@scyld.com>
2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ath9k 0000:00:07.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Registered led device: ath9k-phy0
ieee80211 phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xdfae0000, irq=11
cfg80211: Calling CRDA for country: CN
PPP generic driver version 2.4.2
cfg80211: Regulatory domain changed to country: CN
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
ide-gd driver 1.18
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 3
ehci_hcd 0000:00:03.3: PCI INT D -> Link[LNKH] -> GSI 3 (level, low) -> IRQ 3
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: irq 3, io mem 0xec130000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
nf_conntrack version 0.5.0 (7812 buckets, 31248 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
8139too Fast Ethernet driver 0.9.28
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ath_hal: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
ath_hal: 2009-05-08 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, REGOPS_FUNC, XR)
ath_pci: trunk
wlan: trunk
wlan: mac acl policy registered
ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (trunk)
ath_rate_minstrel: look around rate set to 10%
ath_rate_minstrel: EWMA rolloff level set to 75%
ath_rate_minstrel: max segment size in the mrr set to 6000 us
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 15
r8169 0000:00:09.0: PCI INT A -> Link[LNKD] -> GSI 15 (level, low) -> IRQ 15
r8169 0000:00:09.0: no PCI Express capability
eth0: RTL8169sb/8110sb at 0xdff68000, 00:90:dc:06:a9:20, XID 10000000 IRQ 15
r8169: eth0: link down
sis900.c: v1.08.10 Apr. 2 2006
device eth0 entered promiscuous mode
sky2 driver version 1.25
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 15
ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKE] -> GSI 15 (level, low) -> IRQ 15
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 15, io mem 0xec131000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9
ohci_hcd 0000:00:03.1: PCI INT B -> Link[LNKF] -> GSI 9 (level, low) -> IRQ 9
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 9, io mem 0xec133000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 2142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 2142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 2142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3141
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 2143
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 2143
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3141
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3141
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3141
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3141
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3141
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3142
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 3141
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 2143
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 4141
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 4141
Remounting filesystem read-only
BusyBox v1.15.EXT2-fs error (device sda2): ext2_lookup: 3 (2011-01-18 17deleted inode referenced: 4141:22:51 CET) buil
t-in shell (ash)Remounting filesystem read-only
Enter 'help' fEXT2-fs error (device sda2): ext2_lookup: or a list of buideleted inode referenced: 4141lt-in commands.
Remounting filesystem read-only
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || EXT2-fs error (device sda2): ext2_lookup: _|| _|
|___deleted inode referenced: 4141____|| __|____
_|__|__||_______Remounting filesystem read-only
_||__| |____|
EXT2-fs error (device sda2): ext2_lookup: |__| Wdeleted inode referenced: 4141 I R E L E S S
F R E E D O M
Remounting filesystem read-only
Backfire (10.03.x, latest version. Always.) -------
* 1/3 shot Kahlua In a shot glass, layer Kahlua
* 1/3 shot Bailey's on the bottoEXT2-fs error (device sda2): ext2_lookup: m, then Bailey'sdeleted inode referenced: 4141,
* 1/3 shot
Vodka then Remounting filesystem read-only
Vodka.
----------( by obsy, http://eko.one.pl/ )----------
root@OpenWrt:/# EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 4141
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 4141
Remounting filesystem read-only
EXT2-fs error (device sda2): ext2_lookup: deleted inode referenced: 4141
Remounting filesystem read-only
root@OpenWrt:/#
WRT1900ACS @ OpenWrt
WNDR4300 @ OwpenWrt
