• Zarejestrowany: 2010-08-03
  • Posty: 23

Temat: Problem z wifi

Witam. Mam gargoyle 1.38.. na 1043. Mam problem z n-ką, zamiast 300 jest 130mb/s. Mój konfig:

config 'wifi-device' 'radio0'
    option 'type' 'mac80211'
    option 'macaddr' '00:27:19:fc:89:86'
    option 'hwmode' '11ng'
    list 'ht_capab' 'HT40+'
    list 'ht_capab' 'HT40-'
    list 'ht_capab' 'SHORT-GI-40'
    list 'ht_capab' 'DSSS_CCK-40'
    option 'country' 'PL'
    option 'channel' '3'
    option 'htmode' 'HT40+'

config 'wifi-iface' 'cfg2'
    option 'device' 'radio0'
    option 'mode' 'ap'
    option 'network' 'lan'
    option 'ssid' 'OpenWrt'
    option 'encryption' 'psk2'
    option 'key' '

Wcześniej na tym configu wszystko było w porządku.

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,272

Odp: Problem z wifi

option 'htmode' 'HT20'

jeszcze to zalezy od karty pod drugiej stronie. I od innych sieci w eterze.

Możesz dodać takżę option noscan 1 do config 'wifi-device' 'radio0', ale bardzo tego nie zalecam.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez Mira444

  • Zarejestrowany: 2010-08-03
  • Posty: 23

Odp: Problem z wifi

dzięki, ale to nie pomaga

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,272

Odp: Problem z wifi

Jedyne przypuszczenie to po porstu hostpad nie chce wejść na 40MHz bo mu inna sięc w eterze przeszkadza. Zmień kanał.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez Mira444

  • Zarejestrowany: 2010-08-03
  • Posty: 23

Odp: Problem z wifi

no niestety zmiana kanału nie pomaga, zmiana backfire też nie pomaga.  Transfery po wifi na poziomie 65 mb/s. Obawiam się, ze jest to usterka routera.

6 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,272

Odp: Problem z wifi

Łączysz się na 65Mbps czy masz łączy transfer na poziomie 65Mbps?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

7 Odpowiedź przez rpc

  • rpc
  • Użytkownik
  • Nieaktywny
  • Skąd: Wolbórz
  • Zarejestrowany: 2009-11-02
  • Posty: 581

Odp: Problem z wifi

odpal hostapd w trybie debug i tam powinno coś być napisane o przyczynie zrywania.

Pozdrawiam
Rafał
http://rpc.one.pl
http://openrouter.info

rpc's Strona

8 Odpowiedź przez Mira444

  • Zarejestrowany: 2010-08-03
  • Posty: 23

Odp: Problem z wifi

łączę się na 65MBps. Wcześniej jeden laptop na 300 drugi na 150 i było dobrze.

9 Odpowiedź przez Mira444

  • Zarejestrowany: 2010-08-03
  • Posty: 23

Odp: Problem z wifi

co jest nie tak :

Jan 13 18:09:23 Gargoyle user.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
Jan 13 18:09:23 Gargoyle user.err kernel: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
Jan 13 18:09:23 Gargoyle user.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
Jan 13 18:09:23 Gargoyle user.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
Jan 13 18:09:23 Gargoyle user.err kernel: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
Jan 13 18:09:23 Gargoyle user.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
Jan 13 18:09:23 Gargoyle user.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
Jan 13 18:09:23 Gargoyle user.err kernel: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
Jan 13 18:09:23 Gargoyle user.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
Jan 13 18:09:23 Gargoyle user.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
Jan 13 18:09:23 Gargoyle user.err kernel: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
Jan 13 18:09:23 Gargoyle user.err kernel: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020
Jan 13 18:09:25 Gargoyle user.info kernel: device wlan0 left promiscuous mode
Jan 13 18:09:25 Gargoyle user.info kernel: br-lan: port 2(wlan0) entering disabled state
Jan 13 18:09:26 Gargoyle user.info kernel: device wlan0 entered promiscuous mode
Jan 13 18:09:26 Gargoyle user.info kernel: br-lan: port 2(wlan0) entering forwarding state
Jan 13 16:00:02 Gargoyle user.notice root: starting ntpclient
Jan 13 18:09:26 Gargoyle user.info sysinit: Loading defaults
Jan 13 18:09:26 Gargoyle user.info sysinit: /sbin/uci: Parse error (invalid command) at line 1, byte 0
Jan 13 18:09:26 Gargoyle user.info sysinit: /sbin/uci: Parse error (invalid command) at line 1, byte 0
Jan 13 18:09:27 Gargoyle user.info sysinit: Loading synflood protection
Jan 13 18:09:27 Gargoyle user.info sysinit: Adding custom chains
Jan 13 18:09:27 Gargoyle user.info sysinit: Loading zones
Jan 13 18:09:28 Gargoyle user.info sysinit: Loading forwarding
Jan 13 18:09:28 Gargoyle user.info sysinit: Loading redirects
Jan 13 18:09:28 Gargoyle user.info sysinit: Loading rules
Jan 13 18:09:28 Gargoyle user.info sysinit: Loading includes
Jan 13 18:09:28 Gargoyle user.info sysinit: Loading zone defaults
Jan 13 18:09:28 Gargoyle user.info sysinit: /sbin/uci: Parse error (invalid command) at line 1, byte 0
Jan 13 18:09:28 Gargoyle user.notice root: adding lan (br-lan) to firewall zone lan
Jan 13 18:09:29 Gargoyle user.info sysinit: /sbin/uci: Parse error (invalid command) at line 1, byte 0
Jan 13 18:09:29 Gargoyle user.info sysinit: /sbin/uci: Parse error (invalid command) at line 1, byte 0
Jan 13 18:09:29 Gargoyle user.info sysinit: /sbin/uci: Parse error (invalid command) at line 1, byte 0
Jan 13 18:09:29 Gargoyle user.notice root: adding wan (pppoe-wan) to firewall zone wan
Jan 13 18:09:29 Gargoyle user.info sysinit: /sbin/uci: Parse error (invalid command) at line 1, byte 0
Jan 13 18:09:29 Gargoyle user.info sysinit: /sbin/uci: Parse error (invalid command) at line 1, byte 0
Jan 13 18:09:29 Gargoyle user.info sysinit: /sbin/uci: Parse error (invalid command) at line 1, byte 0
Jan 13 18:09:29 Gargoyle user.info sysinit: /sbin/uci: Parse error (invalid command) at line 1, byte 0
Jan 13 18:09:30 Gargoyle cron.err crond[1479]: crond (busybox 1.15.3) started, log level 5
Jan 13 18:09:30 Gargoyle authpriv.info dropbear[1487]: Running in background
Jan 13 18:09:32 Gargoyle daemon.crit httpd_gargoyle[1520]: socket :: - Address family not supported by protocol
Jan 13 18:09:32 Gargoyle daemon.err httpd_gargoyle[1520]: unknown sockaddr family on listen socket - 0
Jan 13 18:09:32 Gargoyle daemon.warn httpd_gargoyle[1527]: started as root without requesting chroot(), warning only
Jan 13 18:09:32 Gargoyle daemon.notice httpd_gargoyle[1527]: httpd_gargoyle/1.0 14mar2008 starting on Gargoyle, port 80
Jan 13 18:09:32 Gargoyle user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Jan 13 18:09:32 Gargoyle user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Jan 13 18:09:37 Gargoyle daemon.info dnsmasq[1590]: started, version 2.55 cachesize 150
Jan 13 18:09:37 Gargoyle daemon.info dnsmasq[1590]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Jan 13 18:09:37 Gargoyle daemon.info dnsmasq-dhcp[1590]: DHCP, IP range 192.168.1.100 -- 192.168.1.250, lease time 12h
Jan 13 18:09:37 Gargoyle daemon.info dnsmasq[1590]: using local addresses only for domain lan
Jan 13 18:09:37 Gargoyle daemon.info dnsmasq[1590]: reading /tmp/resolv.conf.auto
Jan 13 18:09:37 Gargoyle daemon.info dnsmasq[1590]: using nameserver 194.204.152.34#53
Jan 13 18:09:37 Gargoyle daemon.info dnsmasq[1590]: using nameserver 194.204.159.1#53
Jan 13 18:09:37 Gargoyle daemon.warn dnsmasq[1590]: ignoring nameserver 192.168.1.1 - local interface
Jan 13 18:09:37 Gargoyle daemon.info dnsmasq[1590]: using local addresses only for domain lan
Jan 13 18:09:37 Gargoyle daemon.info dnsmasq[1590]: read /etc/hosts - 2 addresses
Jan 13 18:09:37 Gargoyle daemon.info dnsmasq-dhcp[1590]: read /etc/ethers - 0 addresses
Jan 13 18:09:39 Gargoyle user.info sysinit: a
Jan 13 18:09:39 Gargoyle user.info sysinit: b
Jan 13 18:09:39 Gargoyle daemon.notice rpc.statd[1636]: Version 1.1.6 Starting
Jan 13 18:09:39 Gargoyle daemon.warn sm-notify[1637]: Failed to open /var/lib/nfs/sm.bak: No such file or directory
Jan 13 18:09:39 Gargoyle daemon.notice rpc.statd[1636]: statd running as root. chown /var/lib/nfs/sm to choose different user
Jan 13 18:09:46 Gargoyle user.info sysinit: ERROR: No valid dynamic DNS service configurations defined
Jan 13 18:09:46 Gargoyle user.info sysinit: (Did you specify correct configuration file path?)
Jan 13 18:09:46 Gargoyle user.info sysinit: setting up led WLAN
Jan 13 18:09:47 Gargoyle user.debug kernel: ar71xx-wdt: enabling watchdog timer
Jan 13 18:09:48 Gargoyle daemon.warn dnsmasq-dhcp[1590]: DHCP packet received on eth0.2 which has no address
Jan 13 18:09:48 Gargoyle daemon.warn dnsmasq-dhcp[1590]: DHCP packet received on eth0.2 which has no address
Jan 13 18:10:15 Gargoyle daemon.info dnsmasq-dhcp[1590]: DHCPREQUEST(br-lan) 172.16.1.235 00:50:8d:9a:c4:30
Jan 13 18:10:15 Gargoyle daemon.info dnsmasq-dhcp[1590]: DHCPNAK(br-lan) 172.16.1.235 00:50:8d:9a:c4:30 wrong network
Jan 13 18:10:15 Gargoyle daemon.info dnsmasq-dhcp[1590]: DHCPREQUEST(br-lan) 172.16.1.235 00:50:8d:9a:c4:30
Jan 13 18:10:15 Gargoyle daemon.info dnsmasq-dhcp[1590]: DHCPNAK(br-lan) 172.16.1.235 00:50:8d:9a:c4:30 wrong network
Jan 13 18:10:15 Gargoyle daemon.info dnsmasq-dhcp[1590]: DHCPREQUEST(br-lan) 172.16.1.235 00:50:8d:9a:c4:30
Jan 13 18:10:15 Gargoyle daemon.info dnsmasq-dhcp[1590]: DHCPNAK(br-lan) 172.16.1.235 00:50:8d:9a:c4:30 wrong network
Jan 13 18:10:15 Gargoyle user.warn kernel: transmission-da invoked oom-killer: gfp_mask=0x201da, order=0, oom_adj=0
Jan 13 18:10:16 Gargoyle user.warn kernel: Call Trace:[<80068374>] 0x80068374
Jan 13 18:10:16 Gargoyle user.warn kernel: [<80068374>] 0x80068374
Jan 13 18:10:16 Gargoyle user.warn kernel: [<800b1714>] 0x800b1714
Jan 13 18:10:16 Gargoyle user.warn kernel: [<800b1d3c>] 0x800b1d3c
Jan 13 18:10:16 Gargoyle user.warn kernel: [<800b1de4>] 0x800b1de4
Jan 13 18:10:18 Gargoyle daemon.info dnsmasq-dhcp[1590]: DHCPDISCOVER(br-lan) 00:50:8d:9a:c4:30
Jan 13 18:10:18 Gargoyle daemon.info dnsmasq-dhcp[1590]: DHCPOFFER(br-lan) 192.168.1.238 00:50:8d:9a:c4:30
Jan 13 18:10:18 Gargoyle daemon.info dnsmasq-dhcp[1590]: DHCPREQUEST(br-lan) 192.168.1.238 00:50:8d:9a:c4:30
Jan 13 18:10:18 Gargoyle daemon.info dnsmasq-dhcp[1590]: DHCPACK(br-lan) 192.168.1.238 00:50:8d:9a:c4:30 Marian-Komputer
Jan 13 18:10:20 Gargoyle daemon.info hostapd: wlan0: STA f0:7b:cb:3c:13:32 IEEE 802.11: authenticated
Jan 13 18:10:20 Gargoyle daemon.info hostapd: wlan0: STA f0:7b:cb:3c:13:32 IEEE 802.11: associated (aid 1)
Jan 13 18:10:20 Gargoyle daemon.info hostapd: wlan0: STA f0:7b:cb:3c:13:32 WPA: pairwise key handshake completed (RSN)
Jan 13 18:10:20 Gargoyle daemon.info dnsmasq-dhcp[1590]: DHCPREQUEST(br-lan) 192.168.1.247 f0:7b:cb:3c:13:32
Jan 13 18:10:20 Gargoyle daemon.info dnsmasq-dhcp[1590]: DHCPACK(br-lan) 192.168.1.247 f0:7b:cb:3c:13:32 DOM
Jan 13 18:11:01 Gargoyle cron.err crond[1479]: USER root pid 2105 cmd /usr/bin/set_kernel_timezone >/dev/null 2>&1
Jan 13 18:11:03 Gargoyle daemon.warn dnsmasq-dhcp[1590]: DHCP packet received on eth0.2 which has no address
Jan 13 18:11:03 Gargoyle daemon.warn dnsmasq-dhcp[1590]: DHCP packet received on eth0.2 which has no address
Jan 13 18:11:30 Gargoyle daemon.info hostapd: wlan0: STA 00:26:37:69:3c:2c IEEE 802.11: authenticated
Jan 13 18:11:30 Gargoyle daemon.info hostapd: wlan0: STA 00:26:37:69:3c:2c IEEE 802.11: associated (aid 2)
Jan 13 18:11:30 Gargoyle daemon.info hostapd: wlan0: STA 00:26:37:69:3c:2c WPA: pairwise key handshake completed (RSN)
Jan 13 18:11:30 Gargoyle daemon.info dnsmasq-dhcp[1590]: DHCPREQUEST(br-lan) 192.168.1.215 00:26:37:69:3c:2c
Jan 13 18:11:30 Gargoyle daemon.info dnsmasq-dhcp[1590]: DHCPACK(br-lan) 192.168.1.215 00:26:37:69:3c:2c GT-S8500
Jan 13 18:12:37 Gargoyle daemon.info hostapd: wlan0: STA 00:26:37:69:3c:2c IEEE 802.11: disassociated
Jan 13 18:12:38 Gargoyle daemon.info hostapd: wlan0: STA 00:26:37:69:3c:2c IEEE 802.11: deauthenticated due to inactivity
Jan 13 18:12:47 Gargoyle daemon.warn dnsmasq-dhcp[1590]: DHCP packet received on eth0.2 which has no address
Jan 13 18:12:56 Gargoyle authpriv.info dropbear[2142]: Child connection from 192.168.1.238:49492
Jan 13 18:13:03 Gargoyle authpriv.notice dropbear[2142]: password auth succeeded for 'root' from 192.168.1.238:49492
Jan 13 18:13:32 Gargoyle cron.err crond[2190]: crond (busybox 1.15.3) started, log level 5
Jan 13 18:14:29 Gargoyle user.info kernel: Adding 5365700k swap on /dev/sda1.  Priority:-1 extents:1 across:5365700k
Jan 13 18:15:00 Gargoyle daemon.warn dnsmasq-dhcp[1590]: DHCP packet received on eth0.2 which has no address
Jan 13 18:15:59 Gargoyle daemon.warn dnsmasq-dhcp[1590]: DHCP packet received on eth0.2 which has no address
Jan 13 18:15:59 Gargoyle daemon.warn dnsmasq-dhcp[1590]: DHCP packet received on eth0.2 which has no address
Jan 13 18:17:03 Gargoyle daemon.warn dnsmasq-dhcp[1590]: DHCP packet received on eth0.2 which has no address
Jan 13 18:17:41 Gargoyle daemon.warn dnsmasq-dhcp[1590]: DHCP packet received on eth0.2 which has no address
Jan 13 18:19:23 Gargoyle daemon.info hostapd: wlan0: STA f0:7b:cb:3c:13:32 WPA: group key handshake completed (RSN)
Jan 13 18:19:36 Gargoyle cron.err crond[2723]: crond (busybox 1.15.3) started, log level 5
Jan 13 18:19:37 Gargoyle user.notice rdate: Synced with ntp.task.gda.pl
Jan 13 18:19:51 Gargoyle daemon.warn dnsmasq-dhcp[1590]: no address range available for DHCP request via eth0.2
Jan 13 18:19:51 Gargoyle daemon.warn dnsmasq-dhcp[1590]: no address range available for DHCP request via eth0.2
Jan 13 18:20:27 Gargoyle daemon.warn dnsmasq-dhcp[1590]: no address range available for DHCP request via eth0.2
Jan 13 18:21:01 Gargoyle cron.err crond[2723]: USER root pid 2749 cmd /usr/bin/set_kernel_timezone >/dev/null 2>&1
Jan 13 18:21:27 Gargoyle daemon.info hostapd: wlan0: STA f0:7b:cb:3c:13:32 IEEE 802.11: disassociated
Jan 13 18:23:10 Gargoyle daemon.warn dnsmasq-dhcp[1590]: no address range available for DHCP request via eth0.2
Jan 13 18:23:10 Gargoyle daemon.warn dnsmasq-dhcp[1590]: no address range available for DHCP request via eth0.2
Jan 13 18:23:37 Gargoyle daemon.warn dnsmasq-dhcp[1590]: no address range available for DHCP request via eth0.2
Jan 13 18:24:39 Gargoyle daemon.warn dnsmasq-dhcp[1590]: no address range available for DHCP request via eth0.2
Jan 13 18:25:32 Gargoyle daemon.warn dnsmasq-dhcp[1590]: no address range available for DHCP request via eth0.2
Jan 13 18:27:30 Gargoyle daemon.warn dnsmasq-dhcp[1590]: no address range available for DHCP request via eth0.2
Jan 13 18:27:32 Gargoyle daemon.warn dnsmasq-dhcp[1590]: no address range available for DHCP request via eth0.2
root@Gargoyle:~#

Wróciłem do oryginalnego sofu i wifi n działa na maksa. Powrót do openwrt i max 130 MB/s. Chyba kupię Netgeara 3500 L wsadzę tomato. Z tym nie ma problemu.

10 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,272

Odp: Problem z wifi

Masz blad w jakim pliku w /etc/config. Wyłożył Ci sie także transmission z braku pamięci.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona