1 Temat przez riko (edytowany przez riko 2015-08-21 14:01:24)

  • riko
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2015-08-20
  • Posty: 6

Temat: TL-WR1043ND v 2.1 i Huawei E3372 (nie Hilink)

Witam

Mam kłopoty z  współpraca obydwu urzadzeń. Wgrałem do rutera OpenWRT CC z LUCI z eko. Router chodzi ale niestety nie widze by wykrywał mi modem. Prosiłbym jeżeli oba urzadzenia powinny współpracować o pomoc w skonfigurowaniu tego  w LUCI.
Niestety jestem raczkujacym linuksiarzem i prosiłbym o dokładny proces jak to można ustawić w LUCI ( raczej nie w konsoli). W Gargulcu sobie jakoś radziłem jednak jest już dalej nie rozwijany i podobno nie wspiera nie hilinków.

Bedę bardzo wdzięczny za wszelka pomoc.

Pozdrawiam

Darek

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,960

Odp: TL-WR1043ND v 2.1 i Huawei E3372 (nie Hilink)

W luci - siec/interfejsy, kliknij wan, zmień na 3g/umts/cdma, spyta się czy zmienić protokół, tak. Z listy urządzeń wybierz /dev/ttyUSB0, wpisz apn (pewnie internet), jeżeli karta ma pin to go podaj. Zapisz i musi się połączyć. Tyle możesz z luci zrobić.

Jeżeli nie masz /dev/ttyUSB0 na liście to podłącz modem przez hub usb z własnym zasilaniem.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez riko

  • riko
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2015-08-20
  • Posty: 6

Odp: TL-WR1043ND v 2.1 i Huawei E3372 (nie Hilink)

Niestety widzi modem /dev/ttyUSB0 ustawiam to i niestety się nie łaczy. Czy istnieje jakas mozliwosc wymuszania LTE ew obserwacji poziomu sygnału bts itd jak w Gargulcu.
Sprawdziłem to samo ze starszym modemem E173u-2 i wszystko zagrało niestety z powyższym mimo iz jest widoczny nic nie bangla.

Czy cos można jeszcze próbować poza przerobieniem go na hlinka.

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,960

Odp: TL-WR1043ND v 2.1 i Huawei E3372 (nie Hilink)

Pokaż logi z systemu, też masz to w gui.

A jak nie  -to ustaw z konsoli.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez riko

  • riko
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2015-08-20
  • Posty: 6

Odp: TL-WR1043ND v 2.1 i Huawei E3372 (nie Hilink)

Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.950000] usbcore: registered new interface driver cdc_ether
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.960000] usbcore: registered new interface driver cdc_ncm
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.030000] cfg80211: Calling CRDA to update world regulatory domain
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.050000] cfg80211: World regulatory domain updated:
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.060000] cfg80211:  DFS Master region: unset
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.060000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.070000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.080000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.090000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.100000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.100000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.110000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.120000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.130000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.150000] usbcore: registered new interface driver huawei_cdc_ncm
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.250000] PPP generic driver version 2.4.2
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.260000] PPP MPPE Compression module registered
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.260000] NET: Registered protocol family 24
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.270000] PPTP driver version 0.8.5
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.280000] usbcore: registered new interface driver qmi_wwan
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.290000] usbcore: registered new interface driver rndis_host
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.300000] usbcore: registered new interface driver sierra
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.300000] usbserial: USB Serial support registered for Sierra USB modem
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.320000] usbcore: registered new interface driver sierra_net
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.390000] usbcore: registered new interface driver cdc_mbim
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.400000] usbcore: registered new interface driver option
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.410000] usbserial: USB Serial support registered for GSM modem (1-port)
Fri Jul 31 23:10:36 2015 kern.debug kernel: [   14.440000] ath: EEPROM regdomain: 0x0
Fri Jul 31 23:10:36 2015 kern.debug kernel: [   14.440000] ath: EEPROM indicates default country code should be used
Fri Jul 31 23:10:36 2015 kern.debug kernel: [   14.440000] ath: doing EEPROM country->regdmn map search
Fri Jul 31 23:10:36 2015 kern.debug kernel: [   14.440000] ath: country maps to regdmn code: 0x3a
Fri Jul 31 23:10:36 2015 kern.debug kernel: [   14.440000] ath: Country alpha2 being used: US
Fri Jul 31 23:10:36 2015 kern.debug kernel: [   14.440000] ath: Regpair used: 0x3a
Fri Jul 31 23:10:36 2015 kern.debug kernel: [   14.460000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.460000] ieee80211 phy0: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.470000] cfg80211: Calling CRDA for country: US
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.470000] cfg80211: Regulatory domain changed to country: US
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.480000] cfg80211:  DFS Master region: FCC
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.480000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.490000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.500000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.510000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.520000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.530000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Fri Jul 31 23:10:37 2015 user.emerg syslog: 'radio0' is disabled
Fri Jul 31 23:10:38 2015 user.emerg syslog: 'radio0' is disabled
Fri Jul 31 23:10:38 2015 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Fri Jul 31 23:10:38 2015 kern.info kernel: [   19.360000] usb 1-1: USB disconnect, device number 2
Fri Jul 31 23:10:39 2015 daemon.err block: /dev/mtdblock3 is already mounted
Fri Jul 31 23:10:39 2015 kern.info kernel: [   20.130000] usb 1-1: new high-speed USB device number 3 using ehci-platform
Fri Jul 31 23:10:39 2015 kern.info kernel: [   20.320000] option 1-1:1.0: GSM modem (1-port) converter detected
Fri Jul 31 23:10:39 2015 kern.info kernel: [   20.330000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
Fri Jul 31 23:10:39 2015 kern.info kernel: [   20.340000] option 1-1:1.1: GSM modem (1-port) converter detected
Fri Jul 31 23:10:39 2015 kern.info kernel: [   20.340000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
Fri Jul 31 23:10:40 2015 kern.info kernel: [   20.440000] huawei_cdc_ncm 1-1:1.2: MAC-Address: 00:1e:10:1f:00:00
Fri Jul 31 23:10:40 2015 kern.info kernel: [   20.440000] huawei_cdc_ncm 1-1:1.2: setting rx_max = 16384
Fri Jul 31 23:10:40 2015 kern.info kernel: [   20.480000] huawei_cdc_ncm 1-1:1.2: NDP will be placed at end of frame for this device.
Fri Jul 31 23:10:40 2015 kern.info kernel: [   20.490000] huawei_cdc_ncm 1-1:1.2: cdc-wdm0: USB WDM device
Fri Jul 31 23:10:40 2015 kern.info kernel: [   20.500000] huawei_cdc_ncm 1-1:1.2 wwan0: register 'huawei_cdc_ncm' at usb-ehci-platform.0-1, Huawei CDC NCM device, 00:1e:10:1f:00:00
Fri Jul 31 23:10:40 2015 kern.info kernel: [   20.540000] usb-storage 1-1:1.3: USB Mass Storage device detected
Fri Jul 31 23:10:40 2015 kern.info kernel: [   20.540000] scsi host1: usb-storage 1-1:1.3
Fri Jul 31 23:10:40 2015 kern.info kernel: [   20.570000] usb-storage 1-1:1.4: USB Mass Storage device detected
Fri Jul 31 23:10:40 2015 kern.info kernel: [   20.580000] scsi host2: usb-storage 1-1:1.4
Fri Jul 31 23:10:40 2015 authpriv.info dropbear[1416]: Not backgrounding
Fri Jul 31 23:10:41 2015 kern.notice kernel: [   21.550000] scsi 1:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Fri Jul 31 23:10:41 2015 kern.notice kernel: [   21.590000] scsi 2:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
Fri Jul 31 23:10:41 2015 kern.notice kernel: [   21.600000] sd 2:0:0:0: [sda] Attached SCSI removable disk
Fri Jul 31 23:10:41 2015 user.emerg syslog: SQM: Trying to start/stop SQM on all interfaces.
Fri Jul 31 23:10:41 2015 user.notice SQM: Trying to start/stop SQM on all interfaces.
Fri Jul 31 23:10:41 2015 user.emerg syslog: SQM: /usr/lib/sqm/run.sh SQM for interface eth1 is not enabled, skipping over...
Fri Jul 31 23:10:41 2015 user.notice SQM: /usr/lib/sqm/run.sh SQM for interface eth1 is not enabled, skipping over...
Fri Jul 31 23:10:43 2015 kern.info kernel: [   23.880000] eth1: link up (1000Mbps/Full duplex)
Fri Jul 31 23:10:43 2015 kern.info kernel: [   23.880000] device eth1 entered promiscuous mode
Fri Jul 31 23:10:43 2015 kern.info kernel: [   23.890000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Fri Jul 31 23:10:43 2015 daemon.notice netifd: Interface 'lan' is enabled
Fri Jul 31 23:10:43 2015 daemon.notice netifd: Interface 'lan' is setting up now
Fri Jul 31 23:10:43 2015 daemon.notice netifd: Interface 'lan' is now up
Fri Jul 31 23:10:43 2015 daemon.notice netifd: Interface 'loopback' is enabled
Fri Jul 31 23:10:43 2015 daemon.notice netifd: Interface 'loopback' is setting up now
Fri Jul 31 23:10:43 2015 daemon.notice netifd: Interface 'loopback' is now up
Fri Jul 31 23:10:43 2015 daemon.notice netifd: Interface 'wan' is setting up now
Fri Jul 31 23:10:43 2015 kern.info kernel: [   23.910000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Fri Jul 31 23:10:43 2015 daemon.notice netifd: Interface 'wan6' is enabled
Fri Jul 31 23:10:43 2015 daemon.notice netifd: Network device 'eth1' link is up
Fri Jul 31 23:10:43 2015 daemon.notice netifd: Network device 'lo' link is up
Fri Jul 31 23:10:43 2015 daemon.notice netifd: Interface 'loopback' has link connectivity
Fri Jul 31 23:10:44 2015 user.notice SQM: Trying to start/stop SQM on interface br-lan
Fri Jul 31 23:10:44 2015 kern.info kernel: [   24.880000] br-lan: port 1(eth1) entered forwarding state
Fri Jul 31 23:10:44 2015 kern.info kernel: [   24.880000] br-lan: port 1(eth1) entered forwarding state
Fri Jul 31 23:10:44 2015 daemon.notice netifd: Bridge 'br-lan' link is up
Fri Jul 31 23:10:44 2015 daemon.notice netifd: Interface 'lan' has link connectivity
Fri Jul 31 23:10:44 2015 kern.info kernel: [   24.910000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Fri Jul 31 23:10:44 2015 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Fri Jul 31 23:10:45 2015 kern.info kernel: [   25.870000] eth0: link up (1000Mbps/Full duplex)
Fri Jul 31 23:10:45 2015 kern.info kernel: [   25.870000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Fri Jul 31 23:10:45 2015 daemon.notice netifd: Network device 'eth0' link is up
Fri Jul 31 23:10:45 2015 daemon.notice netifd: Interface 'wan6' has link connectivity
Fri Jul 31 23:10:45 2015 daemon.notice netifd: Interface 'wan6' is setting up now
Fri Jul 31 23:10:46 2015 kern.info kernel: [   26.880000] br-lan: port 1(eth1) entered forwarding state
Fri Jul 31 23:10:46 2015 daemon.notice netifd: wan (1535): Trying to set mode
Fri Jul 31 23:10:47 2015 daemon.err block: Unkown action change
Fri Jul 31 23:10:47 2015 daemon.err block: Unkown action change
Fri Jul 31 23:10:47 2015 user.emerg syslog: setting up led USB
Fri Jul 31 23:10:47 2015 user.emerg syslog: setting up led WLAN
Fri Jul 31 23:10:47 2015 kern.info kernel: [   27.870000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 4 is up
Fri Jul 31 23:10:47 2015 daemon.notice pppd[1783]: pppd 2.4.7 started by root, uid 0
Fri Jul 31 23:10:47 2015 daemon.info procd: - init complete -
Fri Jul 31 23:10:48 2015 local2.info chat[1799]: abort on (BUSY)
Fri Jul 31 23:10:48 2015 local2.info chat[1799]: abort on (NO CARRIER)
Fri Jul 31 23:10:48 2015 local2.info chat[1799]: abort on (ERROR)
Fri Jul 31 23:10:48 2015 local2.info chat[1799]: report (CONNECT)
Fri Jul 31 23:10:48 2015 local2.info chat[1799]: timeout set to 10 seconds
Fri Jul 31 23:10:48 2015 local2.info chat[1799]: send (AT&F^M)
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: expect (OK)
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: AT&F^M^M
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: OK
Fri Jul 31 23:10:49 2015 local2.info chat[1799]:  -- got it
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: send (ATE1^M)
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: expect (OK)
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: ^M
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: A^M
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: ^MODE: 5,4^M
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: TE1^M^M
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: OK
Fri Jul 31 23:10:49 2015 local2.info chat[1799]:  -- got it
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: send (AT+CGDCONT=1,"IP","internet"^M)
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: timeout set to 30 seconds
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: expect (OK)
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: ^M
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: AT+CGDCONT=1,"IP",^M
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: ^RSSI: 8^M
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: ^M
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: ^HCSQ:"WCDMA",36,25,43^M
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: "internet"^M^M
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: OK
Fri Jul 31 23:10:49 2015 local2.info chat[1799]:  -- got it
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: send (ATD*99***1#^M)
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: expect (CONNECT)
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: ^M
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: ATD*99***1#^M^M
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: CONNECT
Fri Jul 31 23:10:49 2015 local2.info chat[1799]:  -- got it
Fri Jul 31 23:10:49 2015 local2.info chat[1799]: send ( ^M)
Fri Jul 31 23:10:49 2015 daemon.info pppd[1783]: Serial connection established.
Fri Jul 31 23:10:49 2015 daemon.info pppd[1783]: Using interface 3g-wan
Fri Jul 31 23:10:49 2015 daemon.notice pppd[1783]: Connect: 3g-wan <--> /dev/ttyUSB0
Fri Jul 31 23:10:49 2015 kern.info kernel: [   30.260000] 3g-wan: renamed from ppp0
Fri Jul 31 23:10:50 2015 daemon.info dnsmasq[1816]: started, version 2.73 cachesize 150
Fri Jul 31 23:10:50 2015 daemon.info dnsmasq[1816]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Fri Jul 31 23:10:50 2015 daemon.info dnsmasq[1816]: DNS service limited to local subnets
Fri Jul 31 23:10:50 2015 daemon.info dnsmasq-dhcp[1816]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Fri Jul 31 23:10:50 2015 daemon.info dnsmasq[1816]: using local addresses only for domain lan
Fri Jul 31 23:10:50 2015 daemon.warn dnsmasq[1816]: no servers found in /tmp/resolv.conf.auto, will retry
Fri Jul 31 23:10:50 2015 daemon.info dnsmasq[1816]: read /etc/hosts - 1 addresses
Fri Jul 31 23:10:50 2015 daemon.info dnsmasq[1816]: read /tmp/hosts/dhcp - 1 addresses
Fri Jul 31 23:10:50 2015 daemon.info dnsmasq-dhcp[1816]: read /etc/ethers - 0 addresses
Fri Jul 31 23:10:50 2015 user.notice SQM: Trying to start/stop SQM on interface lo
Fri Jul 31 23:10:57 2015 daemon.info dnsmasq-dhcp[1816]: DHCPDISCOVER(br-lan) 192.168.1.114 00:21:85:48:bc:ca
Fri Jul 31 23:10:57 2015 daemon.info dnsmasq-dhcp[1816]: DHCPOFFER(br-lan) 192.168.1.114 00:21:85:48:bc:ca
Fri Jul 31 23:10:57 2015 daemon.info dnsmasq-dhcp[1816]: DHCPREQUEST(br-lan) 192.168.1.114 00:21:85:48:bc:ca
Fri Jul 31 23:10:57 2015 daemon.info dnsmasq-dhcp[1816]: DHCPACK(br-lan) 192.168.1.114 00:21:85:48:bc:ca oem-fe4cf4227e2
Fri Jul 31 23:11:21 2015 daemon.warn pppd[1783]: LCP: timeout sending Config-Requests
Fri Jul 31 23:11:21 2015 daemon.notice pppd[1783]: Connection terminated.
Fri Jul 31 23:11:22 2015 daemon.notice pppd[1783]: Modem hangup
Fri Jul 31 23:11:22 2015 daemon.info pppd[1783]: Exit.
Fri Jul 31 23:11:22 2015 daemon.notice netifd: Interface 'wan' is now down
Fri Jul 31 23:11:22 2015 daemon.notice netifd: Interface 'wan' is setting up now
Fri Jul 31 23:11:22 2015 kern.notice kernel: [   63.040000] random: nonblocking pool is initialized
Fri Jul 31 23:11:23 2015 daemon.notice pppd[1984]: pppd 2.4.7 started by root, uid 0
Fri Jul 31 23:11:24 2015 local2.info chat[1986]: abort on (BUSY)
Fri Jul 31 23:11:24 2015 local2.info chat[1986]: abort on (NO CARRIER)
Fri Jul 31 23:11:24 2015 local2.info chat[1986]: abort on (ERROR)
Fri Jul 31 23:11:24 2015 local2.info chat[1986]: report (CONNECT)
Fri Jul 31 23:11:24 2015 local2.info chat[1986]: timeout set to 10 seconds
Fri Jul 31 23:11:24 2015 local2.info chat[1986]: send (AT&F^M)
Fri Jul 31 23:11:24 2015 local2.info chat[1986]: expect (OK)
Fri Jul 31 23:11:34 2015 local2.info chat[1986]: alarm
Fri Jul 31 23:11:34 2015 local2.info chat[1986]: Failed
Fri Jul 31 23:11:34 2015 daemon.err pppd[1984]: Connect script failed
Fri Jul 31 23:11:35 2015 daemon.info pppd[1984]: Exit.
Fri Jul 31 23:11:36 2015 daemon.notice netifd: Interface 'wan' is now down
Fri Jul 31 23:11:36 2015 daemon.notice netifd: Interface 'wan' is setting up now
Fri Jul 31 23:11:37 2015 daemon.notice pppd[2061]: pppd 2.4.7 started by root, uid 0
Fri Jul 31 23:11:38 2015 local2.info chat[2063]: abort on (BUSY)
Fri Jul 31 23:11:38 2015 local2.info chat[2063]: abort on (NO CARRIER)
Fri Jul 31 23:11:38 2015 local2.info chat[2063]: abort on (ERROR)
Fri Jul 31 23:11:38 2015 local2.info chat[2063]: report (CONNECT)
Fri Jul 31 23:11:38 2015 local2.info chat[2063]: timeout set to 10 seconds
Fri Jul 31 23:11:38 2015 local2.info chat[2063]: send (AT&F^M)
Fri Jul 31 23:11:38 2015 local2.info chat[2063]: expect (OK)
Fri Jul 31 23:11:48 2015 local2.info chat[2063]: alarm
Fri Jul 31 23:11:48 2015 local2.info chat[2063]: Failed
Fri Jul 31 23:11:48 2015 daemon.err pppd[2061]: Connect script failed
Fri Jul 31 23:11:49 2015 daemon.info pppd[2061]: Exit.
Fri Jul 31 23:11:50 2015 daemon.notice netifd: Interface 'wan' is now down
Fri Jul 31 23:11:50 2015 daemon.notice netifd: Interface 'wan' is setting up now
Fri Jul 31 23:11:51 2015 daemon.notice pppd[2195]: pppd 2.4.7 started by root, uid 0
Fri Jul 31 23:11:52 2015 local2.info chat[2197]: abort on (BUSY)
Fri Jul 31 23:11:52 2015 local2.info chat[2197]: abort on (NO CARRIER)
Fri Jul 31 23:11:52 2015 local2.info chat[2197]: abort on (ERROR)
Fri Jul 31 23:11:52 2015 local2.info chat[2197]: report (CONNECT)
Fri Jul 31 23:11:52 2015 local2.info chat[2197]: timeout set to 10 seconds
Fri Jul 31 23:11:52 2015 local2.info chat[2197]: send (AT&F^M)
Fri Jul 31 23:11:52 2015 local2.info chat[2197]: expect (OK)
Fri Jul 31 23:12:02 2015 local2.info chat[2197]: alarm
Fri Jul 31 23:12:02 2015 local2.info chat[2197]: Failed
Fri Jul 31 23:12:02 2015 daemon.err pppd[2195]: Connect script failed
Fri Jul 31 23:12:03 2015 daemon.info pppd[2195]: Exit.
Fri Jul 31 23:12:03 2015 daemon.notice netifd: Interface 'wan' is now down
Fri Jul 31 23:12:03 2015 daemon.notice netifd: Interface 'wan' is setting up now
Fri Jul 31 23:12:05 2015 daemon.notice pppd[2231]: pppd 2.4.7 started by root, uid 0
Fri Jul 31 23:12:06 2015 local2.info chat[2233]: abort on (BUSY)
Fri Jul 31 23:12:06 2015 local2.info chat[2233]: abort on (NO CARRIER)
Fri Jul 31 23:12:06 2015 local2.info chat[2233]: abort on (ERROR)
Fri Jul 31 23:12:06 2015 local2.info chat[2233]: report (CONNECT)
Fri Jul 31 23:12:06 2015 local2.info chat[2233]: timeout set to 10 seconds
Fri Jul 31 23:12:06 2015 local2.info chat[2233]: send (AT&F^M)
Fri Jul 31 23:12:06 2015 local2.info chat[2233]: expect (OK)

6 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,960

Odp: TL-WR1043ND v 2.1 i Huawei E3372 (nie Hilink)

Miałeś połączenie, nie dostał danych od operatora. Później tak jak by się powiesił, bo w ogóle nie odpowiada na próby połączenia. Zrestartuj całość i próbuj jeszcze raz.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

7 Odpowiedź przez riko

  • riko
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2015-08-20
  • Posty: 6

Odp: TL-WR1043ND v 2.1 i Huawei E3372 (nie Hilink)

zrestartowałem i dalej nic - logi

Fri Jul 31 23:10:36 2015 user.info kernel: [    9.910000] block: extroot: not configured
Fri Jul 31 23:10:36 2015 user.info kernel: [    9.920000] mount_root: switching to jffs2 overlay
Fri Jul 31 23:10:36 2015 kern.info kernel: [    9.950000] eth1: link down
Fri Jul 31 23:10:36 2015 user.info kernel: [    9.960000] procd: - early -
Fri Jul 31 23:10:36 2015 user.info kernel: [    9.960000] procd: - watchdog -
Fri Jul 31 23:10:36 2015 user.info kernel: [   10.720000] procd: - ubus -
Fri Jul 31 23:10:36 2015 user.info kernel: [   11.740000] procd: - init -
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.530000] NET: Registered protocol family 10
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.560000] gre: GRE over IPv4 demultiplexor driver
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.560000] ip_gre: GRE over IPv4 tunneling driver
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.570000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.600000] u32 classifier
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.610000]     input device check on
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.610000]     Actions configured
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.610000] Mirror/redirect action on
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.640000] netem: version 1.3
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.650000] fuse init (API version 7.23)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.660000] usbcore: registered new interface driver cdc_acm
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.670000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.710000] usbcore: registered new interface driver cdc_wdm
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.710000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.720000] Backport generated by backports.git backports-20150129-0-gdd4a670
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.730000] ip_tables: (C) 2000-2006 Netfilter Core Team
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.750000] nf_conntrack version 0.5.0 (953 buckets, 3812 max)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.800000] usbcore: registered new interface driver usblp
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.820000] usbcore: registered new interface driver usbserial
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.820000] usbcore: registered new interface driver usbserial_generic
Fri Jul 31 23:10:36 2015 kern.info kernel: [   13.830000] usbserial: USB Serial support registered for generic
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.000000] xt_time: kernel timezone is -0000
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.000000] usbcore: registered new interface driver cdc_ether
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.010000] usbcore: registered new interface driver cdc_ncm
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.070000] cfg80211: Calling CRDA to update world regulatory domain
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.090000] cfg80211: World regulatory domain updated:
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.090000] cfg80211:  DFS Master region: unset
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.090000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.100000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.110000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.120000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.130000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.140000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.150000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.150000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.160000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.200000] huawei_cdc_ncm 1-1:1.2: MAC-Address: 00:1e:10:1f:00:00
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.200000] huawei_cdc_ncm 1-1:1.2: setting rx_max = 16384
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.220000] huawei_cdc_ncm 1-1:1.2: NDP will be placed at end of frame for this device.
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.230000] huawei_cdc_ncm 1-1:1.2: cdc-wdm0: USB WDM device
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.240000] huawei_cdc_ncm 1-1:1.2 wwan0: register 'huawei_cdc_ncm' at usb-ehci-platform.0-1, Huawei CDC NCM device, 00:1e:10:1f:00:00
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.250000] usbcore: registered new interface driver huawei_cdc_ncm
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.350000] PPP generic driver version 2.4.2
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.360000] PPP MPPE Compression module registered
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.370000] NET: Registered protocol family 24
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.370000] PPTP driver version 0.8.5
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.390000] usbcore: registered new interface driver qmi_wwan
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.400000] usbcore: registered new interface driver rndis_host
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.410000] usbcore: registered new interface driver sierra
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.410000] usbserial: USB Serial support registered for Sierra USB modem
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.420000] usbcore: registered new interface driver sierra_net
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.490000] usbcore: registered new interface driver cdc_mbim
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.510000] usbcore: registered new interface driver option
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.520000] usbserial: USB Serial support registered for GSM modem (1-port)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.520000] option 1-1:1.0: GSM modem (1-port) converter detected
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.530000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.540000] option 1-1:1.1: GSM modem (1-port) converter detected
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.540000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
Fri Jul 31 23:10:36 2015 kern.debug kernel: [   14.590000] ath: EEPROM regdomain: 0x0
Fri Jul 31 23:10:36 2015 kern.debug kernel: [   14.590000] ath: EEPROM indicates default country code should be used
Fri Jul 31 23:10:36 2015 kern.debug kernel: [   14.590000] ath: doing EEPROM country->regdmn map search
Fri Jul 31 23:10:36 2015 kern.debug kernel: [   14.590000] ath: country maps to regdmn code: 0x3a
Fri Jul 31 23:10:36 2015 kern.debug kernel: [   14.590000] ath: Country alpha2 being used: US
Fri Jul 31 23:10:36 2015 kern.debug kernel: [   14.590000] ath: Regpair used: 0x3a
Fri Jul 31 23:10:36 2015 kern.debug kernel: [   14.610000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.610000] ieee80211 phy0: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.620000] cfg80211: Calling CRDA for country: US
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.620000] cfg80211: Regulatory domain changed to country: US
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.630000] cfg80211:  DFS Master region: FCC
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.630000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.640000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.650000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.660000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.670000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Fri Jul 31 23:10:36 2015 kern.info kernel: [   14.680000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Fri Jul 31 23:10:37 2015 user.emerg syslog: 'radio0' is disabled
Fri Jul 31 23:10:38 2015 user.emerg syslog: 'radio0' is disabled
Fri Jul 31 23:10:38 2015 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Fri Jul 31 23:10:39 2015 daemon.err block: /dev/mtdblock3 is already mounted
Fri Jul 31 23:10:40 2015 authpriv.info dropbear[1400]: Not backgrounding
Fri Jul 31 23:10:40 2015 user.notice SQM: Trying to start/stop SQM on all interfaces.
Fri Jul 31 23:10:40 2015 user.emerg syslog: SQM: Trying to start/stop SQM on all interfaces.
Fri Jul 31 23:10:40 2015 user.emerg syslog: SQM: /usr/lib/sqm/run.sh SQM for interface eth1 is not enabled, skipping over...
Fri Jul 31 23:10:40 2015 user.notice SQM: /usr/lib/sqm/run.sh SQM for interface eth1 is not enabled, skipping over...
Fri Jul 31 23:10:42 2015 kern.info kernel: [   23.000000] eth1: link up (1000Mbps/Full duplex)
Fri Jul 31 23:10:42 2015 kern.info kernel: [   23.010000] device eth1 entered promiscuous mode
Fri Jul 31 23:10:42 2015 kern.info kernel: [   23.010000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Fri Jul 31 23:10:42 2015 daemon.notice netifd: Interface 'lan' is enabled
Fri Jul 31 23:10:42 2015 daemon.notice netifd: Interface 'lan' is setting up now
Fri Jul 31 23:10:42 2015 daemon.notice netifd: Interface 'lan' is now up
Fri Jul 31 23:10:42 2015 daemon.notice netifd: Interface 'loopback' is enabled
Fri Jul 31 23:10:42 2015 daemon.notice netifd: Interface 'loopback' is setting up now
Fri Jul 31 23:10:42 2015 daemon.notice netifd: Interface 'loopback' is now up
Fri Jul 31 23:10:42 2015 daemon.notice netifd: Interface 'wan' is setting up now
Fri Jul 31 23:10:42 2015 kern.info kernel: [   23.030000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Fri Jul 31 23:10:42 2015 daemon.notice netifd: Interface 'wan6' is enabled
Fri Jul 31 23:10:42 2015 daemon.notice netifd: Network device 'eth1' link is up
Fri Jul 31 23:10:42 2015 daemon.notice netifd: Network device 'lo' link is up
Fri Jul 31 23:10:42 2015 daemon.notice netifd: Interface 'loopback' has link connectivity
Fri Jul 31 23:10:43 2015 user.notice SQM: Trying to start/stop SQM on interface br-lan
Fri Jul 31 23:10:43 2015 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Fri Jul 31 23:10:43 2015 kern.info kernel: [   23.990000] br-lan: port 1(eth1) entered forwarding state
Fri Jul 31 23:10:43 2015 kern.info kernel: [   24.000000] br-lan: port 1(eth1) entered forwarding state
Fri Jul 31 23:10:43 2015 daemon.notice netifd: Bridge 'br-lan' link is up
Fri Jul 31 23:10:43 2015 daemon.notice netifd: Interface 'lan' has link connectivity
Fri Jul 31 23:10:43 2015 kern.info kernel: [   24.090000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Fri Jul 31 23:10:44 2015 kern.info kernel: [   24.690000] eth0: link up (1000Mbps/Full duplex)
Fri Jul 31 23:10:44 2015 daemon.notice netifd: Network device 'eth0' link is up
Fri Jul 31 23:10:44 2015 daemon.notice netifd: Interface 'wan6' has link connectivity
Fri Jul 31 23:10:44 2015 daemon.notice netifd: Interface 'wan6' is setting up now
Fri Jul 31 23:10:44 2015 kern.info kernel: [   24.810000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Fri Jul 31 23:10:45 2015 daemon.notice pppd[1590]: pppd 2.4.7 started by root, uid 0
Fri Jul 31 23:10:45 2015 user.emerg syslog: setting up led USB
Fri Jul 31 23:10:45 2015 user.emerg syslog: setting up led WLAN
Fri Jul 31 23:10:45 2015 kern.info kernel: [   26.000000] br-lan: port 1(eth1) entered forwarding state
Fri Jul 31 23:10:45 2015 daemon.info procd: - init complete -
Fri Jul 31 23:10:46 2015 kern.info kernel: [   26.700000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 4 is up
Fri Jul 31 23:10:46 2015 local2.info chat[1645]: abort on (BUSY)
Fri Jul 31 23:10:46 2015 local2.info chat[1645]: abort on (NO CARRIER)
Fri Jul 31 23:10:46 2015 local2.info chat[1645]: abort on (ERROR)
Fri Jul 31 23:10:46 2015 local2.info chat[1645]: report (CONNECT)
Fri Jul 31 23:10:46 2015 local2.info chat[1645]: timeout set to 10 seconds
Fri Jul 31 23:10:46 2015 local2.info chat[1645]: send (AT&F^M)
Fri Jul 31 23:10:46 2015 local2.info chat[1645]: expect (OK)
Fri Jul 31 23:10:47 2015 daemon.info dnsmasq[1658]: started, version 2.73 cachesize 150
Fri Jul 31 23:10:47 2015 daemon.info dnsmasq[1658]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Fri Jul 31 23:10:47 2015 daemon.info dnsmasq[1658]: DNS service limited to local subnets
Fri Jul 31 23:10:47 2015 daemon.info dnsmasq-dhcp[1658]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Fri Jul 31 23:10:47 2015 daemon.info dnsmasq[1658]: using local addresses only for domain lan
Fri Jul 31 23:10:47 2015 daemon.warn dnsmasq[1658]: no servers found in /tmp/resolv.conf.auto, will retry
Fri Jul 31 23:10:47 2015 daemon.info dnsmasq[1658]: read /etc/hosts - 1 addresses
Fri Jul 31 23:10:47 2015 daemon.info dnsmasq[1658]: read /tmp/hosts/dhcp - 1 addresses
Fri Jul 31 23:10:47 2015 daemon.info dnsmasq-dhcp[1658]: read /etc/ethers - 0 addresses
Fri Jul 31 23:10:47 2015 user.notice SQM: Trying to start/stop SQM on interface lo
Fri Jul 31 23:10:55 2015 daemon.info dnsmasq-dhcp[1658]: DHCPINFORM(br-lan) 192.168.1.190 00:1d:72:c6:35:84
Fri Jul 31 23:10:55 2015 daemon.info dnsmasq-dhcp[1658]: DHCPACK(br-lan) 192.168.1.190 00:1d:72:c6:35:84 Darek-PC
Fri Jul 31 23:10:56 2015 daemon.warn odhcpd[1349]: DHCPV6 SOLICIT IA_NA from 0001000119146a1a001d72c63584 on br-lan: ok fd58:1288:4a03::b42/128
Fri Jul 31 23:10:56 2015 daemon.info dnsmasq[1658]: read /etc/hosts - 1 addresses
Fri Jul 31 23:10:56 2015 daemon.info dnsmasq[1658]: read /tmp/hosts/odhcpd - 0 addresses
Fri Jul 31 23:10:56 2015 daemon.info dnsmasq[1658]: read /tmp/hosts/dhcp - 1 addresses
Fri Jul 31 23:10:56 2015 daemon.info dnsmasq-dhcp[1658]: read /etc/ethers - 0 addresses
Fri Jul 31 23:10:56 2015 local2.info chat[1645]: alarm
Fri Jul 31 23:10:56 2015 local2.info chat[1645]: Failed
Fri Jul 31 23:10:56 2015 daemon.err pppd[1590]: Connect script failed
Fri Jul 31 23:10:57 2015 daemon.info pppd[1590]: Exit.
Fri Jul 31 23:10:57 2015 daemon.notice netifd: Interface 'wan' is now down
Fri Jul 31 23:10:57 2015 daemon.notice netifd: Interface 'wan' is setting up now
Fri Jul 31 23:10:59 2015 daemon.notice pppd[1803]: pppd 2.4.7 started by root, uid 0
Fri Jul 31 23:11:00 2015 local2.info chat[1805]: abort on (BUSY)
Fri Jul 31 23:11:00 2015 local2.info chat[1805]: abort on (NO CARRIER)
Fri Jul 31 23:11:00 2015 local2.info chat[1805]: abort on (ERROR)
Fri Jul 31 23:11:00 2015 local2.info chat[1805]: report (CONNECT)
Fri Jul 31 23:11:00 2015 local2.info chat[1805]: timeout set to 10 seconds
Fri Jul 31 23:11:00 2015 local2.info chat[1805]: send (AT&F^M)
Fri Jul 31 23:11:00 2015 local2.info chat[1805]: expect (OK)
Fri Jul 31 23:11:10 2015 local2.info chat[1805]: alarm
Fri Jul 31 23:11:10 2015 local2.info chat[1805]: Failed
Fri Jul 31 23:11:10 2015 daemon.err pppd[1803]: Connect script failed
Fri Jul 31 23:11:11 2015 daemon.info pppd[1803]: Exit.
Fri Jul 31 23:11:11 2015 daemon.notice netifd: Interface 'wan' is now down
Fri Jul 31 23:11:11 2015 daemon.notice netifd: Interface 'wan' is setting up now
Fri Jul 31 23:11:12 2015 daemon.notice pppd[1825]: pppd 2.4.7 started by root, uid 0
Fri Jul 31 23:11:13 2015 local2.info chat[1827]: abort on (BUSY)
Fri Jul 31 23:11:13 2015 local2.info chat[1827]: abort on (NO CARRIER)
Fri Jul 31 23:11:14 2015 local2.info chat[1827]: abort on (ERROR)
Fri Jul 31 23:11:14 2015 local2.info chat[1827]: report (CONNECT)
Fri Jul 31 23:11:14 2015 local2.info chat[1827]: timeout set to 10 seconds
Fri Jul 31 23:11:14 2015 local2.info chat[1827]: send (AT&F^M)
Fri Jul 31 23:11:14 2015 local2.info chat[1827]: expect (OK)
Fri Jul 31 23:11:24 2015 local2.info chat[1827]: alarm
Fri Jul 31 23:11:24 2015 local2.info chat[1827]: Failed
Fri Jul 31 23:11:24 2015 daemon.err pppd[1825]: Connect script failed
Fri Jul 31 23:11:25 2015 daemon.info pppd[1825]: Exit.
Fri Jul 31 23:11:25 2015 daemon.notice netifd: Interface 'wan' is now down
Fri Jul 31 23:11:25 2015 daemon.notice netifd: Interface 'wan' is setting up now
Fri Jul 31 23:11:25 2015 kern.notice kernel: [   65.930000] random: nonblocking pool is initialized
Fri Jul 31 23:11:26 2015 daemon.notice pppd[1849]: pppd 2.4.7 started by root, uid 0
Fri Jul 31 23:11:27 2015 local2.info chat[1851]: abort on (BUSY)
Fri Jul 31 23:11:27 2015 local2.info chat[1851]: abort on (NO CARRIER)
Fri Jul 31 23:11:27 2015 local2.info chat[1851]: abort on (ERROR)
Fri Jul 31 23:11:27 2015 local2.info chat[1851]: report (CONNECT)
Fri Jul 31 23:11:27 2015 local2.info chat[1851]: timeout set to 10 seconds
Fri Jul 31 23:11:27 2015 local2.info chat[1851]: send (AT&F^M)
Fri Jul 31 23:11:27 2015 local2.info chat[1851]: expect (OK)
Fri Jul 31 23:11:28 2015 daemon.warn odhcpd[1349]: DHCPV6 SOLICIT IA_NA from 0001000119146a1a001d72c63584 on br-lan: ok fd58:1288:4a03::b42/128
Fri Jul 31 23:11:28 2015 daemon.warn odhcpd[1349]: DHCPV6 REQUEST IA_NA from 0001000119146a1a001d72c63584 on br-lan: ok fd58:1288:4a03::b42/128
Fri Jul 31 23:11:37 2015 local2.info chat[1851]: alarm
Fri Jul 31 23:11:37 2015 local2.info chat[1851]: Failed
Fri Jul 31 23:11:37 2015 daemon.err pppd[1849]: Connect script failed
Fri Jul 31 23:11:38 2015 daemon.info pppd[1849]: Exit.
Fri Jul 31 23:11:38 2015 daemon.notice netifd: Interface 'wan' is now down
Fri Jul 31 23:11:38 2015 daemon.notice netifd: Interface 'wan' is setting up now
Fri Jul 31 23:11:40 2015 daemon.notice pppd[1966]: pppd 2.4.7 started by root, uid 0
Fri Jul 31 23:11:41 2015 local2.info chat[1968]: abort on (BUSY)
Fri Jul 31 23:11:41 2015 local2.info chat[1968]: abort on (NO CARRIER)
Fri Jul 31 23:11:41 2015 local2.info chat[1968]: abort on (ERROR)
Fri Jul 31 23:11:41 2015 local2.info chat[1968]: report (CONNECT)
Fri Jul 31 23:11:41 2015 local2.info chat[1968]: timeout set to 10 seconds
Fri Jul 31 23:11:41 2015 local2.info chat[1968]: send (AT&F^M)
Fri Jul 31 23:11:41 2015 local2.info chat[1968]: expect (OK)

8 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,960

Odp: TL-WR1043ND v 2.1 i Huawei E3372 (nie Hilink)

Dokładnie to samo. Modem nie odpowiada. Wyjmij go i włóż jeszcze raz. Albo zrób reflash na hlinka albo ustaw ncm z konsoli.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

9 Odpowiedź przez riko

  • riko
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2015-08-20
  • Posty: 6

Odp: TL-WR1043ND v 2.1 i Huawei E3372 (nie Hilink)

Trochę głupie pytanie jak ustawić ncm z konsoli.

10 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,960

Odp: TL-WR1043ND v 2.1 i Huawei E3372 (nie Hilink)

http://eko.one.pl/?p=openwrt-3g#obsugamodemwwtrybiencm

Pakietów nie instalujesz bo wszystko co trzeba już masz w obrazie.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

11 Odpowiedź przez dzejk

  • dzejk
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-11-06
  • Posty: 27

Odp: TL-WR1043ND v 2.1 i Huawei E3372 (nie Hilink)

Cezary, czy ustawienie ncm, w porównaniu do hilinka, daje jakieś konkretne korzyści, np. mniejszy ping (pomijając podwójny nat w hilinku) ?

12 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,960

Odp: TL-WR1043ND v 2.1 i Huawei E3372 (nie Hilink)

Daje większą szybkość w porównaniu do 3g. I pełną kontrolę połączenia w porównaniu do hilinka. (to na+ albo na -, zależy jak spojrzeć na to).

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

13 Odpowiedź przez Sigma

  • Sigma
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-01-25
  • Posty: 239

Odp: TL-WR1043ND v 2.1 i Huawei E3372 (nie Hilink)

Czyli w temacie szybkości na 3g niehilink>hilink? A na LTE? smile

OpenWrt: WAX206/NWA50AX/EA6350v3 || W szufladzie: WNDR4300/TL-WDR4300/SR3200

14 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 115,960

Odp: TL-WR1043ND v 2.1 i Huawei E3372 (nie Hilink)

3g to tryb połączenia, nie tryb pracy modemu. Jak masz połaczenie po 3g (ppp) to na LTE też się połączy, ale będzie wolniej.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

15 Odpowiedź przez Sigma

  • Sigma
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2014-01-25
  • Posty: 239

Odp: TL-WR1043ND v 2.1 i Huawei E3372 (nie Hilink)

ok, już rozumiem smile

OpenWrt: WAX206/NWA50AX/EA6350v3 || W szufladzie: WNDR4300/TL-WDR4300/SR3200