Pierwszy post na tym forum

Moj lsmod:

Module                  Size  Used by    Tainted: P
n_hdlc                  7120   1
atm                    35616   0 (unused)
ppp_mppe_mppc          13412   0
ppp_synctty             6348   1
visor                  13384   0 (unused)
mct_u232                7240   0 (unused)
usb-storage            68240   0 (unused)
sd_mod                 12500   0 (unused)
scsi_mod               66048   1 [usb-storage sd_mod]
usbserial              24540   0 [visor mct_u232]
printer                 9852   0 (unused)
acm                     6172   0 (unused)
wlcompat               14944   0 (unused)
ehci-hcd               20556   0 (unused)
uhci                   29044   0 (unused)
usb-ohci               19252   0 (unused)
nls_iso8859-2           3184   0 (unused)
ip_conntrack_tftp       1712   0 (unused)
ip_nat_irc              2336   0 (unused)
ip_conntrack_irc        3128   1
ip_nat_ftp              2960   0 (unused)
ip_conntrack_ftp        4272   1
ipt_unclean             6832   0 (unused)
ipt_TTL                  944   0 (unused)
ipt_ttl                  496   0 (unused)
ipt_TOS                  976   0 (unused)
ipt_time                1544   0 (unused)
ipt_tos                  304   0 (unused)
ipt_tcpmss               656   0 (unused)
ipt_mac                  544   0 (unused)
ipt_length               336   0 (unused)
ipt_ECN                 1616   0 (unused)
ipt_ecn                  656   0 (unused)
ipt_DSCP                 960   0 (unused)
ipt_dscp                 304   0 (unused)
ipt_CLASSIFY             704   0 (unused)
imq                     2384   0 (unused)
ipt_IMQ                  672   0 (unused)
ipt_string              3240   0 (unused)
ipt_layer7             10752   0 (unused)
ipt_ipp2p               7320   0 (unused)
ipt_recent              8208   0 (unused)
ipt_connbytes           1168   0 (unused)
ipt_helper               560   0 (unused)
ipt_conntrack           1104   0 (unused)
ipt_CONNMARK             816   0 (unused)
ipt_connmark             352   0 (unused)
tun                     4504   0 (unused)
ppp_async               7884   0 (unused)
ppp_generic            22300   3 [ppp_mppe_mppc ppp_synctty ppp_async]
slhc                    6064   0 [ppp_generic]
vfat                   11340   0 (unused)
fat                    34448   0 [vfat]
ext3                   71388   0 (unused)
jbd                    51136   0 [ext3]
ext2                   40304   0 (unused)
wl                    630776   0 (unused)
sco                    10196   0 (unused)
rfcomm                 35128   0 (unused)
l2cap                  18524   1 [rfcomm]
bluez                  38936   0 [sco rfcomm l2cap]
usbcore                71296   2 [visor mct_u232 usb-storage usbserial printer acm ehci-hcd uhci usb-ohci]
switch-robo             4540   0 (unused)
switch-core             4864   0 [switch-robo]
diag                   25520   0 (unused)

Oraz dmesg:
CPU revision is: 00029006
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB, 2-way, linesize 16 bytes.
Linux version 2.4.34 (nbd@ds10) (gcc version 3.4.6 (OpenWrt-2.0)) #3 Sun Sep 30 20:33:21 CEST 2007
Setting the PFC to its default value
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
CPU: BCM4704 rev 9 at 264 MHz
Using 132.000 MHz high precision timer.
Calibrating delay loop... 262.96 BogoMIPS
Memory: 30432k/32768k available (1462k kernel code, 2336k reserved, 100k data, 80k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: Initializing host
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Setting latency timer of device 01:00.0 to 64
PCI: Fixing up bus 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Registering mini_fo version $Id$
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
b44.c:v0.93 (Mar, 2004)
PCI: Setting latency timer of device 00:01.0 to 64
eth0: Broadcom 47xx 10/100BaseT Ethernet 00:1e:8c:72:32:86
PCI: Setting latency timer of device 00:02.0 to 64
eth1: Broadcom 47xx 10/100BaseT Ethernet 40:10:18:00:00:2d
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0x800000 at 0x1c000000
bootloader size: 262144
Physically mapped flash: Filesystem type: squashfs, size=0x121cc8
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x007f0000 : "linux"
0x000be400-0x001f0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x007f0000-0x00800000 : "nvram"
0x001f0000-0x007f0000 : "rootfs_data"
sflash: found no supported devices
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
ip_conntrack version 2.1 (5953 buckets, 5953 max) - 360 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 80k freed
Algorithmics/MIPS FPU Emulator v1.5
diag: Detected 'ASUS WL-500g Premium'
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
Probing device eth0: found!
mini_fo: using base directory: /
mini_fo: using storage directory: /jffs
jffs2.bbc: SIZE compression mode activated.
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
device eth0.0 entered promiscuous mode
eth0.0: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
br-lan: port 1(eth0.0) entering learning state
br-lan: port 1(eth0.0) entering forwarding state
br-lan: topology change detected, propagating
BFL_ENETADM not set in boardflags. Use force=1 to ignore.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
BlueZ Core ver 2.4 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
BlueZ L2CAP ver 2.3 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
BlueZ RFCOMM ver 1.1
Copyright (C) 2002 Maxim Krasnyansky <maxk@qualcomm.com>
Copyright (C) 2002 Marcel Holtmann <marcel@holtmann.org>
BlueZ SCO ver 0.3 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
PCI: Setting latency timer of device 01:02.0 to 64
PCI: Enabling device 01:02.0 (0004 -> 0006)
wl0: Broadcom BCM4318 802.11 Wireless Controller 4.80.53.0
Journalled Block Device driver loaded
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
IPP2P v0.8.1_rc1 loading
imq driver loaded.
ipt_time loading
PCI: Setting latency timer of device 00:03.0 to 64
usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6
usb-ohci.c: usb-00:03.0, PCI device 14e4:4715
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Enabling device 01:03.0 (0000 -> 0001)
uhci.c: USB UHCI at I/O 0x100, IRQ 2
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Enabling device 01:03.1 (0000 -> 0001)
uhci.c: USB UHCI at I/O 0x120, IRQ 2
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: $Revision: 1.275 $ time 08:58:50 Sep 29 2007
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
PCI: Enabling device 01:03.2 (0000 -> 0002)
ehci_hcd 01:03.2: PCI device 1106:3104
ehci_hcd 01:03.2: irq 2, pci mem c0249000
usb.c: new USB bus registered, assigned bus number 4
EHCI: Enabling VIA 6212 workarounds
ehci_hcd 01:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 4 ports detected
usb.c: registered new driver acm
acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN adapters
usb.c: registered new driver usblp
printer.c: v0.13: USB Printer Device Class driver
hub.c: connect-debounce failed, port 1 disabled
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
usbserial.c: USB Serial support registered for MCT U232
mct_u232.c: Magic Control Technology USB-RS232 converter driver z2.0
hub.c: new USB device 01:03.2-1, assigned address 2
hub.c: USB hub found
hub.c: 4 ports detected
usbserial.c: USB Serial support registered for Handspring Visor / Treo / Palm 4.0 / Clié 4.x
usbserial.c: USB Serial support registered for Sony Clié 3.5
usbserial.c: USB Serial support registered for Sony Clié 5.0
visor.c: USB HandSpring Visor, Palm m50x, Treo, Sony Clié driver v1.7
hub.c: new USB device 01:03.2-1.1, assigned address 3
usb.c: USB device 3 (vend/prod 0xa12/0x1) is not claimed by any active driver.
device wl0 entered promiscuous mode
wl0: attempt to add interface with same source address.
br-lan: port 2(wl0) entering learning state
br-lan: port 2(wl0) entering forwarding state
br-lan: topology change detected, propagating
hub.c: new USB device 01:03.2-1.2, assigned address 4
printer.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
hub.c: new USB device 01:03.0-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x6b9/0x4061) is not claimed by any active driver.
MPPE/MPPC encryption/compression module registered
HDLC line discipline: version $Revision: 3.7 $, maxframe=4096
N_HDLC line discipline registered.
usb_control/bulk_msg: timeout
usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -145
usb.c: USB disconnect on device 01:03.2-1.1 address 3

A poza tym próbowałem robić to też według tej strony ale też nic z tego nie wyszlo:
http://forum.openwrt.org/viewtopic.php?id=1650

device wl0 entered promiscuous mode
wl0: attempt to add interface with same source address.
br-lan: port 2(wl0) entering learning state
br-lan: port 2(wl0) entering forwarding state
br-lan: topology change detected, propagating
hub.c: new USB device 01:03.2-1.2, assigned address 4
printer.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
hub.c: new USB device 01:03.0-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x6b9/0x4061) is not claimed by any active driver.
MPPE/MPPC encryption/compression module registered
HDLC line discipline: version $Revision: 3.7 $, maxframe=4096
N_HDLC line discipline registered.
usb_control/bulk_msg: timeout
usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -145
usb.c: USB disconnect on device 01:03.2-1.1 address 3
BlueZ HCI USB driver ver 2.7 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
usb.c: registered new driver hci_usb

root@ASUS:~# hcid
root@ASUS:~# hcitool dev
Devices:
root@ASUS:~# hciconfig
root@ASUS:~#

Nic nie pokazuje.

root@ASUS:~# /etc/bluez-utils stop
-ash: /etc/bluez-utils: not found

chyba zla sciezka bo nie odnalazlo tego pliku. Patrzylem tez przez WinSCP i tez nie widac tego

root@ASUS:~# /etc/init.d/bluez-utils stop
killall: dund: no process killed
killall: pand: no process killed
killall: sdpd: no process killed
root@ASUS:~# /etc/bluez-utils start
-ash: /etc/bluez-utils: not found
root@ASUS:~# /etc/init.d/bluez-utils start
root@ASUS:~# hcid
root@ASUS:~# hcitool dev
Devices:
root@ASUS:~#

Nic nie pomogło.. :-/

W ogóle to zobacz czy masz /etc/modules.d/90-bluetooth. Tam powinien być wpisane hci_usb. Jak masz zrób restart rutera. Zobacz przez lsmod czy jest hci_usb załadowany. Jak tak  to pokaż dmesg i ps. Czasami nie masz go na jakimś hubie usb? Jak tak to podłącz go bezpośrednio.

Musisz mieć, on pochodzi z kmod-bluetooth. Instalowałeś pakiety z kamikaze czy z tej dziwnej lokalizacji? usuń i zainstaluj jeszcze raz ten pakiet.

Jak zrobisz coś ciekawego z bluetootem to podziel się później opisem dla potomnych.

Mam dokładnie taki sam problem na tym samym routerze jednak pod fw olega.
Bluetooth także od Cambridge Silicon Radio HCI wersja 2.0

Pomożecie ?

Mój syslog
http://www.nopaste.pl/Source/boe.txt

lsmod
http://www.nopaste.pl/Source/bof.txt

Pod lsusb mam to:
Bus 003 Device 001: ID 0000:0000
Bus 003 Device 002: ID 152d:2338 JMicron Technology Corp. / JMicron USA Technology Corp. JM20337 Hi-Speed USB to SATA & PATA Combo Bridge
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

Chociaz bluetooth jest na pewno podlaczony (co kilka sekund miga dioda).

EDIT: ok, poradziłem sobie, podłączyłem bluetooth przez hub usb.

Teraz inny problem.

[root@LesiukNET etc]$ pand --listen --master --role NAP --devup /tmp/harddisk/bluez/dev-up
Failed to open control socket: No such file or directory