A jak to się ma do pliku w init.d na montowanie partycji? Usuwam go po prostu?

A nie można dodać do tables 2 poleceń z montowaniem i odinstalowaniem o 2 porach

Nie rozumiem jeszcze tylko jednego. W twym opisie instalacji ctorrenta podałeś że trzeba dodać wpis do crona na przeglądanie kolejki po to żeby ctorrent "wyłapał" dodany plik i zaczął go ściągać. Kiedy wpisuje komendy wyskakuje
to co użytkownikowi zielony.

nie wiem tez czy to jest problem z samym cronem, wyglada to tak
root@OpenWrt:~# killall crond; /etc/init.d/S60cron start
killall: crond: no process killed
-ash: /etc/init.d/S60cron: not found

Mam wtedy zastosować :

/etc/init.d/cron stop
/etc/init.d/cron start
/etc/init.d/cron enable

Czy to ma jakiś związek z tym że po każdym restarcie torrenty wczytują mi się od nowa? Dlaczego u mnie tak się dzieje?

Tak czytałem i nawet zastosowałem ale chodzi mi o to że bi mi klient zassysał odrazu od skończonego momentu a nie od zera. O ile się nie mylę chodzi o plik log który u mnie jest zawsze pusty razem z torrentami w .torrent w pliku var. Dzięki za wyrozumiałoś.

Zainstalowałem dctcs i nie mogę połączyć się z serwerem. Żeby do niego wejść muszę mieć zainstalowany serwer ftp? Przypuszczam, że oczywiście nie. Więc co robię źle tym razem? Wbijam się przez ftp://192.168.1.1/hdd/

#sample config file with compiled in default values

#change these according to your system
torrent-directory=/hdd/downloads/torrent/
download-directory=/hdd/

#change user name and password
user=me
password=just

exit-hours=168
exit-ratio=5.6
cache-size=1
restart-torrents=0

download-limit=0
upload-limit=0

#port=18000

#arbitrary arguments to ctorrent
#ctorrent-args=-a
#url to prepend in the details box
#detail-url=ftp://192.168.1.1/hdd/

#ctorrent=/usr/bin/ctorrent
#client-host=localhost:15000
#htmlroot-directory=/usr/share/dctcs/www/darkside.ctcs.gui/

A żeby używać ctcs trzeba uruchomić getdownload.sh bo nie wiem czemu nie reaguje jak naciskam start.
Muszę użyć opcji client-host=localhost:15000? Głupie pytania ale wiesz Cezary, że jestem zielony.

Ściągnąłem wersję na white russian  po prostu i nie chciał działać. Tak czy owak ctcs jest o niebo lepsze od getdownloads.sh.

Zobacz zawartość /etc/config/fstab, tam są definiowane partycje.

Jako kto wchodzisz na ftp? Nie root tylko anonymous/dowolne hasło

Pokaż wynik dmesg i mount

CPU revision is: 00029006
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB, 2-way, linesize 16 bytes.
Linux version 2.4.34 (user@debian) (gcc version 3.4.6 (OpenWrt-2.0)) #9 Sun Mar 30 11:46:17 CEST 2008
Setting the PFC to its default value
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
CPU: BCM4704 rev 9 at 264 MHz
Using 132.000 MHz high precision timer.
Calibrating delay loop... 262.96 BogoMIPS
Memory: 30432k/32768k available (1462k kernel code, 2336k reserved, 100k data, 80k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: Initializing host
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Setting latency timer of device 01:00.0 to 64
PCI: Fixing up bus 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Registering mini_fo version $Id$
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
b44.c:v0.93 (Mar, 2004)
PCI: Setting latency timer of device 00:01.0 to 64
eth0: Broadcom 47xx 10/100BaseT Ethernet 00:1d:60:46:92:15
PCI: Setting latency timer of device 00:02.0 to 64
eth1: Broadcom 47xx 10/100BaseT Ethernet 40:10:18:00:00:2d
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0x800000 at 0x1c000000
bootloader size: 262144
Physically mapped flash: Filesystem type: squashfs, size=0x1c3513
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x007f0000 : "linux"
0x000be400-0x00290000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x007f0000-0x00800000 : "nvram"
0x00290000-0x007f0000 : "rootfs_data"
sflash: found no supported devices
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
ip_conntrack version 2.1 (5953 buckets, 5953 max) - 360 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 80k freed
Algorithmics/MIPS FPU Emulator v1.5
diag: Detected 'ASUS WL-500g Premium'
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
Probing device eth0: found!
mini_fo: using base directory: /
mini_fo: using storage directory: /jffs
jffs2.bbc: SIZE compression mode activated.
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
eth0.0: add 01:00:5e:00:00:01 mcast address to master interface
eth0.1: Setting MAC address to  00 0e 8e 02 37 94.
device eth0 entered promiscuous mode
VLAN (eth0.1):  Setting underlying device (eth0) to promiscious mode.
BFL_ENETADM not set in boardflags. Use force=1 to ignore.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
eth0.1: add 01:00:5e:00:00:01 mcast address to master interface
PCI: Setting latency timer of device 01:02.0 to 64
PCI: Enabling device 01:02.0 (0004 -> 0006)
wl0: Broadcom BCM4318 802.11 Wireless Controller 4.80.53.0
Journalled Block Device driver loaded
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
usb-uhci.c: $Revision: 1.275 $ time 11:03:24 Mar 29 2008
usb-uhci.c: High bandwidth mode enabled
PCI: Enabling device 01:03.0 (0000 -> 0001)
UHCI: Enabling VIA 6212 workarounds
usb-uhci.c: USB UHCI at I/O 0x100, IRQ 2
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Enabling device 01:03.1 (0000 -> 0001)
UHCI: Enabling VIA 6212 workarounds
usb-uhci.c: USB UHCI at I/O 0x120, IRQ 2
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
PCI: Enabling device 01:03.2 (0000 -> 0002)
ehci_hcd 01:03.2: PCI device 1106:3104
ehci_hcd 01:03.2: irq 2, pci mem c01ec000
usb.c: new USB bus registered, assigned bus number 3
EHCI: Enabling VIA 6212 workarounds
ehci_hcd 01:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 4 ports detected
SCSI subsystem driver Revision: 1.00
hub.c: connect-debounce failed, port 2 disabled
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
hub.c: new USB device 01:03.2-2, assigned address 2
scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: Initio    Model: IC25N010ATDA04-0  Rev: 1.06
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 19640880 512-byte hdwr sectors (10056 MB)
Partition check:
/dev/scsi/host0/bus0/target0/lun0: p1
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
mini_fo: nondir_unmod_to_mod:                                   ERROR creating sto file.
mini_fo_open: ERROR creating storage file.

mount

rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro)
none on /dev type devfs (rw)
none on /proc type proc (rw)
none on /tmp type tmpfs (rw,nosuid,nodev)
none on /dev/pts type devpts (rw)
/dev/mtdblock/4 on /jffs type jffs2 (rw)
mini_fo:/jffs on / type mini_fo (rw)
/dev/scsi/host0/bus0/target0/lun0/part1 on /hdd type vfat (rw)
none on /proc/bus/usb type usbfs (rw)

OK dzięki tak zrobię ale nie wiem czemu nie mogę instalować dysku twoim sposobem uci set fstab.cfg1.enabled=1 a wywala że partycja 1 jest włączona a przecież nie ma w tym firmware automontowania.

config mount
        option target   /hdd
        option device   /dev/scsi/host0/bus0/target0/lun0/part1
        option fstype   auto
        option options  rw
        option enabled  '1'

config swap
        option device   /dev/scsi/host0/bus0/target0/lun0/part2
        option enabled   0