Jedyne co wiem że mogę wrzucić to treść dmesg od samego początku, chyba ze sa jeszcze jakies inne logi.
[ 0.000000] Linux version 3.10.49 (bb@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r42625) ) #3 Wed Oct 1 14:00:51 CEST 2014
[ 0.000000] MyLoader: sysp=3c4e4ab2, boardp=f767d9d2, parts=9ba4c377
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[ 0.000000] SoC: Atheros AR9330 rev 1
[ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 80334b60, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: board=TL-MR3020 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 28588k/32768k available (2369k kernel code, 4180k reserved, 621k data, 272k init, 0k highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 512
[ 0.090000] NET: Registered protocol family 16
[ 0.100000] MIPS: machine is TP-LINK TL-MR3020
[ 0.350000] bio: create slab <bio-0> at 0
[ 0.360000] Switching to clocksource MIPS
[ 0.370000] NET: Registered protocol family 2
[ 0.370000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.370000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.370000] TCP: Hash tables configured (established 512 bind 512)
[ 0.380000] TCP: reno registered
[ 0.380000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.390000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.400000] NET: Registered protocol family 1
[ 0.400000] PCI: CLS 0 bytes, default 32
[ 0.420000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.430000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.440000] msgmni has been set to 55
[ 0.440000] io scheduler noop registered
[ 0.440000] io scheduler deadline registered (default)
[ 0.450000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.460000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
[ 0.470000] console [ttyATH0] enabled, bootconsole disabled
[ 0.480000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[ 0.490000] m25p80 spi0.0: found s25sl032p, expected m25p80
[ 0.490000] m25p80 spi0.0: s25sl032p (4096 Kbytes)
[ 0.500000] 5 tp-link partitions found on MTD device spi0.0
[ 0.500000] Creating 5 MTD partitions on "spi0.0":
[ 0.510000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.520000] 0x000000020000-0x00000012e63c : "kernel"
[ 0.520000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.530000] 0x00000012e63c-0x0000003f0000 : "rootfs"
[ 0.540000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.550000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.560000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.560000] 0x000000350000-0x0000003f0000 : "rootfs_data"
[ 0.570000] 0x0000003f0000-0x000000400000 : "art"
[ 0.570000] 0x000000020000-0x0000003f0000 : "firmware"
[ 0.600000] libphy: ag71xx_mdio: probed
[ 1.150000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[ 1.160000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 1.160000] TCP: cubic registered
[ 1.170000] NET: Registered protocol family 17
[ 1.170000] Bridge firewalling registered
[ 1.180000] 8021q: 802.1Q VLAN Support v1.8
[ 1.190000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 1.200000] Freeing unused kernel memory: 272K (8034c000 - 80390000)
[ 4.090000] usbcore: registered new interface driver usbfs
[ 4.090000] usbcore: registered new interface driver hub
[ 4.100000] usbcore: registered new device driver usb
[ 4.110000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.110000] ehci-platform: EHCI generic platform driver
[ 4.120000] ehci-platform ehci-platform: EHCI Host Controller
[ 4.120000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 4.130000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 4.160000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 4.160000] hub 1-0:1.0: USB hub found
[ 4.160000] hub 1-0:1.0: 1 port detected
[ 8.000000] jffs2: notice: (329) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (0 unchecked, 1 orphan) and 32 of xref (0 dead, 18 orphan) found.
[ 9.740000] NET: Registered protocol family 10
[ 9.750000] nf_conntrack version 0.5.0 (450 buckets, 1800 max)
[ 9.770000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 9.790000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[ 9.800000] Backport generated by backports.git backports-20140320-37-g5c33da0
[ 9.810000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.860000] xt_time: kernel timezone is -0000
[ 9.890000] cfg80211: Calling CRDA to update world regulatory domain
[ 9.890000] cfg80211: World regulatory domain updated:
[ 9.900000] cfg80211: DFS Master region: unset
[ 9.900000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9.910000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.920000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.930000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.930000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.940000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 9.950000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 9.960000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.970000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 10.060000] PPP generic driver version 2.4.2
[ 10.060000] NET: Registered protocol family 24
[ 10.120000] ath: EEPROM regdomain: 0x0
[ 10.120000] ath: EEPROM indicates default country code should be used
[ 10.120000] ath: doing EEPROM country->regdmn map search
[ 10.120000] ath: country maps to regdmn code: 0x3a
[ 10.120000] ath: Country alpha2 being used: US
[ 10.120000] ath: Regpair used: 0x3a
[ 10.130000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.140000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[ 10.150000] cfg80211: Calling CRDA for country: US
[ 10.150000] cfg80211: Regulatory domain changed to country: US
[ 10.160000] cfg80211: DFS Master region: FCC
[ 10.160000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 10.170000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 10.180000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[ 10.190000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[ 10.190000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 10.200000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 19.200000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.200000] device eth0 entered promiscuous mode
[ 19.220000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 21.230000] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
[ 21.250000] device wlan0-1 entered promiscuous mode
[ 22.200000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 23.620000] wlan0: authenticate with bc:f6:85:57:c2:f1
[ 23.630000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[ 23.640000] wlan0: authenticated
[ 23.650000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[ 23.660000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[ 23.660000] wlan0: associated
[ 23.660000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 24.640000] br-lan: port 2(wlan0-1) entered forwarding state
[ 24.640000] br-lan: port 2(wlan0-1) entered forwarding state
[ 24.650000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-1: link becomes ready
[ 24.660000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 26.640000] br-lan: port 2(wlan0-1) entered forwarding state
[ 4304.850000] wlan0: authenticate with bc:f6:85:57:c2:f1
[ 4304.860000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[ 4304.870000] wlan0: authenticated
[ 4304.880000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[ 4304.880000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[ 4304.890000] wlan0: associated
[ 4305.090000] br-lan: port 2(wlan0-1) entered disabled state
[ 4306.140000] br-lan: port 2(wlan0-1) entered forwarding state
[ 4306.140000] br-lan: port 2(wlan0-1) entered forwarding state
[ 4308.140000] br-lan: port 2(wlan0-1) entered forwarding state
[ 8239.040000] wlan0: deauthenticated from bc:f6:85:57:c2:f1 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
[ 8239.100000] wlan0: authenticate with bc:f6:85:57:c2:f1
[ 8239.110000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[ 8239.120000] wlan0: authenticated
[ 8239.140000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[ 8239.140000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[ 8239.150000] wlan0: associated
[19189.810000] wlan0: authenticate with bc:f6:85:57:c2:f1
[19189.820000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[19189.830000] wlan0: authenticated
[19189.840000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[19189.840000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[19189.850000] wlan0: associated
[19190.050000] br-lan: port 2(wlan0-1) entered disabled state
[19191.160000] br-lan: port 2(wlan0-1) entered forwarding state
[19191.160000] br-lan: port 2(wlan0-1) entered forwarding state
[19193.160000] br-lan: port 2(wlan0-1) entered forwarding state
[21142.850000] wlan0: authenticate with bc:f6:85:57:c2:f1
[21142.860000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[21142.870000] wlan0: authenticated
[21142.880000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[21142.880000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[21142.890000] wlan0: associated
[21143.090000] br-lan: port 2(wlan0-1) entered disabled state
[21144.200000] br-lan: port 2(wlan0-1) entered forwarding state
[21144.210000] br-lan: port 2(wlan0-1) entered forwarding state
[21146.210000] br-lan: port 2(wlan0-1) entered forwarding state
[31936.850000] wlan0: authenticate with bc:f6:85:57:c2:f1
[31936.860000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[31936.870000] wlan0: authenticated
[31936.880000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[31936.880000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[31936.890000] wlan0: associated
[31937.090000] br-lan: port 2(wlan0-1) entered disabled state
[31938.180000] br-lan: port 2(wlan0-1) entered forwarding state
[31938.180000] br-lan: port 2(wlan0-1) entered forwarding state
[31940.180000] br-lan: port 2(wlan0-1) entered forwarding state
[52671.820000] wlan0: authenticate with bc:f6:85:57:c2:f1
[52671.830000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[52671.840000] wlan0: authenticated
[52671.850000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[52671.850000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[52671.860000] wlan0: associated
[52672.050000] br-lan: port 2(wlan0-1) entered disabled state
[52673.140000] br-lan: port 2(wlan0-1) entered forwarding state
[52673.150000] br-lan: port 2(wlan0-1) entered forwarding state
[52675.150000] br-lan: port 2(wlan0-1) entered forwarding state
[57534.850000] wlan0: authenticate with bc:f6:85:57:c2:f1
[57534.860000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[57534.870000] wlan0: authenticated
[57534.880000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[57534.880000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[57534.890000] wlan0: associated
[57535.090000] br-lan: port 2(wlan0-1) entered disabled state
[57536.180000] br-lan: port 2(wlan0-1) entered forwarding state
[57536.180000] br-lan: port 2(wlan0-1) entered forwarding state
[57538.180000] br-lan: port 2(wlan0-1) entered forwarding state
[67382.850000] wlan0: authenticate with bc:f6:85:57:c2:f1
[67382.860000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[67382.870000] wlan0: authenticated
[67382.880000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[67382.880000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[67382.890000] wlan0: associated
[67383.090000] br-lan: port 2(wlan0-1) entered disabled state
[67384.130000] br-lan: port 2(wlan0-1) entered forwarding state
[67384.140000] br-lan: port 2(wlan0-1) entered forwarding state
[67386.140000] br-lan: port 2(wlan0-1) entered forwarding state
[68317.890000] wlan0: authenticate with bc:f6:85:57:c2:f1
[68317.900000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[68317.910000] wlan0: authenticated
[68317.920000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[68317.930000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[68317.930000] wlan0: associated
[68318.130000] br-lan: port 2(wlan0-1) entered disabled state
[68319.020000] br-lan: port 2(wlan0-1) entered forwarding state
[68319.020000] br-lan: port 2(wlan0-1) entered forwarding state
[68321.020000] br-lan: port 2(wlan0-1) entered forwarding state
[75271.810000] wlan0: authenticate with bc:f6:85:57:c2:f1
[75271.820000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[75271.830000] wlan0: authenticated
[75271.840000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[75271.840000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[75271.850000] wlan0: associated
[75272.050000] br-lan: port 2(wlan0-1) entered disabled state
[75273.140000] br-lan: port 2(wlan0-1) entered forwarding state
[75273.150000] br-lan: port 2(wlan0-1) entered forwarding state
[75275.150000] br-lan: port 2(wlan0-1) entered forwarding state
[76206.080000] wlan0: deauthenticated from bc:f6:85:57:c2:f1 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
[76206.140000] wlan0: authenticate with bc:f6:85:57:c2:f1
[76206.150000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[76206.150000] wlan0: authenticated
[76206.170000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[76206.170000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[76206.180000] wlan0: associated
[76207.090000] br-lan: port 2(wlan0-1) entered disabled state
[76207.440000] br-lan: port 2(wlan0-1) entered forwarding state
[76207.450000] br-lan: port 2(wlan0-1) entered forwarding state
[76209.450000] br-lan: port 2(wlan0-1) entered forwarding state
[79041.920000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[111714.850000] wlan0: authenticate with bc:f6:85:57:c2:f1
[111714.860000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[111714.870000] wlan0: authenticated
[111714.880000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[111714.880000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[111714.890000] wlan0: associated
[111715.090000] br-lan: port 2(wlan0-1) entered disabled state
[111716.150000] br-lan: port 2(wlan0-1) entered forwarding state
[111716.160000] br-lan: port 2(wlan0-1) entered forwarding state
[111718.160000] br-lan: port 2(wlan0-1) entered forwarding state
[112649.120000] wlan0: deauthenticated from bc:f6:85:57:c2:f1 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
[112649.180000] wlan0: authenticate with bc:f6:85:57:c2:f1
[112649.190000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[112649.190000] wlan0: authenticated
[112649.220000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[112649.230000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[112649.230000] wlan0: associated
[112650.130000] br-lan: port 2(wlan0-1) entered disabled state
[112650.520000] br-lan: port 2(wlan0-1) entered forwarding state
[112650.530000] br-lan: port 2(wlan0-1) entered forwarding state
[112652.530000] br-lan: port 2(wlan0-1) entered forwarding state
[114740.770000] wlan0: authenticate with bc:f6:85:57:c2:f1
[114740.780000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[114740.790000] wlan0: authenticated
[114740.800000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[114740.800000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[114740.810000] wlan0: associated
[114741.010000] br-lan: port 2(wlan0-1) entered disabled state
[114742.120000] br-lan: port 2(wlan0-1) entered forwarding state
[114742.120000] br-lan: port 2(wlan0-1) entered forwarding state
[114744.120000] br-lan: port 2(wlan0-1) entered forwarding state
[114744.770000] wlan0: authenticate with bc:f6:85:57:c2:f1
[114744.780000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[114744.790000] wlan0: authenticated
[114744.800000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[114744.800000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[114744.810000] wlan0: associated
[114745.010000] br-lan: port 2(wlan0-1) entered disabled state
[114746.130000] br-lan: port 2(wlan0-1) entered forwarding state
[114746.140000] br-lan: port 2(wlan0-1) entered forwarding state
[114748.140000] br-lan: port 2(wlan0-1) entered forwarding state
[114772.770000] wlan0: authenticate with bc:f6:85:57:c2:f1
[114772.780000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[114772.790000] wlan0: authenticated
[114772.800000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[114772.800000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[114772.810000] wlan0: associated
[114773.010000] br-lan: port 2(wlan0-1) entered disabled state
[114774.030000] br-lan: port 2(wlan0-1) entered forwarding state
[114774.040000] br-lan: port 2(wlan0-1) entered forwarding state
[114776.040000] br-lan: port 2(wlan0-1) entered forwarding state
[120507.040000] wlan0: deauthenticated from bc:f6:85:57:c2:f1 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA)
[120507.100000] wlan0: authenticate with bc:f6:85:57:c2:f1
[120507.110000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[120507.110000] wlan0: authenticated
[120507.140000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[120507.140000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[120507.150000] wlan0: associated
[120508.050000] br-lan: port 2(wlan0-1) entered disabled state
[120508.430000] br-lan: port 2(wlan0-1) entered forwarding state
[120508.430000] br-lan: port 2(wlan0-1) entered forwarding state
[120510.430000] br-lan: port 2(wlan0-1) entered forwarding state
[123541.820000] wlan0: authenticate with bc:f6:85:57:c2:f1
[123541.830000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[123541.840000] wlan0: authenticated
[123541.850000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[123541.850000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[123541.860000] wlan0: associated
[123542.050000] br-lan: port 2(wlan0-1) entered disabled state
[123543.110000] br-lan: port 2(wlan0-1) entered forwarding state
[123543.120000] br-lan: port 2(wlan0-1) entered forwarding state
[123545.120000] br-lan: port 2(wlan0-1) entered forwarding state
[127507.810000] wlan0: authenticate with bc:f6:85:57:c2:f1
[127507.820000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[127507.830000] wlan0: authenticated
[127507.840000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[127507.840000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[127507.850000] wlan0: associated
[127508.050000] br-lan: port 2(wlan0-1) entered disabled state
[127509.080000] br-lan: port 2(wlan0-1) entered forwarding state
[127509.080000] br-lan: port 2(wlan0-1) entered forwarding state
[127511.080000] br-lan: port 2(wlan0-1) entered forwarding state
[128444.850000] wlan0: authenticate with bc:f6:85:57:c2:f1
[128444.860000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[128444.870000] wlan0: authenticated
[128444.880000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[128444.880000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[128444.890000] wlan0: associated
[128445.090000] br-lan: port 2(wlan0-1) entered disabled state
[128446.160000] br-lan: port 2(wlan0-1) entered forwarding state
[128446.160000] br-lan: port 2(wlan0-1) entered forwarding state
[128448.160000] br-lan: port 2(wlan0-1) entered forwarding state
[139857.370000] wlan0: channel switch with multiple interfaces on the same channel, disconnecting
[139858.140000] wlan0: authenticate with bc:f6:85:57:c2:f1
[139858.150000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[139858.160000] wlan0: authenticated
[139858.170000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[139858.180000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[139858.180000] wlan0: associated
[139858.370000] br-lan: port 2(wlan0-1) entered disabled state
[139859.490000] br-lan: port 2(wlan0-1) entered forwarding state
[139859.500000] br-lan: port 2(wlan0-1) entered forwarding state
[139861.500000] br-lan: port 2(wlan0-1) entered forwarding state
[141355.930000] wlan0: channel switch with multiple interfaces on the same channel, disconnecting
[141356.710000] wlan0: authenticate with bc:f6:85:57:c2:f1
[141356.720000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[141356.730000] wlan0: authenticated
[141356.740000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[141356.740000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[141356.750000] wlan0: associated
[141356.940000] br-lan: port 2(wlan0-1) entered disabled state
[141358.010000] br-lan: port 2(wlan0-1) entered forwarding state
[141358.020000] br-lan: port 2(wlan0-1) entered forwarding state
[141360.020000] br-lan: port 2(wlan0-1) entered forwarding state
[174745.460000] wlan0: channel switch with multiple interfaces on the same channel, disconnecting
[174746.240000] wlan0: authenticate with bc:f6:85:57:c2:f1
[174746.250000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[174746.260000] wlan0: authenticated
[174746.270000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[174746.270000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[174746.280000] wlan0: associated
[174761.810000] wlan0: authenticate with bc:f6:85:57:c2:f1
[174761.820000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[174761.830000] wlan0: authenticated
[174761.840000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[174761.840000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[174761.850000] wlan0: associated
[174765.800000] wlan0: authenticate with bc:f6:85:57:c2:f1
[174765.810000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[174765.820000] wlan0: authenticated
[174765.830000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[174765.830000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[174765.840000] wlan0: associated
[174766.040000] br-lan: port 2(wlan0-1) entered disabled state
[174767.110000] br-lan: port 2(wlan0-1) entered forwarding state
[174767.110000] br-lan: port 2(wlan0-1) entered forwarding state
[174769.110000] br-lan: port 2(wlan0-1) entered forwarding state
[174772.770000] wlan0: authenticate with bc:f6:85:57:c2:f1
[174772.780000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[174772.790000] wlan0: authenticated
[174772.800000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[174772.800000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[174772.810000] wlan0: associated
[174773.010000] br-lan: port 2(wlan0-1) entered disabled state
[174773.350000] br-lan: port 2(wlan0-1) entered forwarding state
[174773.350000] br-lan: port 2(wlan0-1) entered forwarding state
[174775.350000] br-lan: port 2(wlan0-1) entered forwarding state
[176573.140000] wlan0: channel switch with multiple interfaces on the same channel, disconnecting
[176573.910000] wlan0: authenticate with bc:f6:85:57:c2:f1
[176573.920000] wlan0: send auth to bc:f6:85:57:c2:f1 (try 1/3)
[176573.930000] wlan0: authenticated
[176573.940000] wlan0: associate with bc:f6:85:57:c2:f1 (try 1/3)
[176573.940000] wlan0: RX AssocResp from bc:f6:85:57:c2:f1 (capab=0x411 status=0 aid=1)
[176573.950000] wlan0: associated