dalej nic a wynik z
root@OpenWrt:~# dmesg
[ 0.000000] Linux version 3.10.49 (cezary@eko.one.pl) (gcc version 4.8.3 (OpnWrt/Linaro GCC 4.8-2014.04 unknown) ) #4 Fri Mar 13 18:34:17 CET 2015
[ 0.000000] SoC: VR9 rev 1.2
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019556 (MIPS 34Kc)
[ 0.000000] MIPS: machine is TDW8970 - TP-LINK TD-W8970
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x03ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 80424b80, node_mem_map 8100360
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total paes: 16256
[ 0.000000] Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=0001438d
[ 0.000000] Readback ErrCtl register=0001438d
[ 0.000000] Memory: 60072k/65536k available (3217k kernel code, 5464k reservd, 1136k data, 244k init, 0k highmem)
[ 0.000000] NR_IRQS:256
[ 0.000000] Setting up vectored interrupts
[ 0.000000] CPU Clock: 500MHz
[ 0.028000] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
[ 0.032000] pid_max: default: 32768 minimum: 301
[ 0.036000] Mount-cache hash table entries: 512
[ 0.040000] pinctrl core: initialized pinctrl subsystem
[ 0.044000] NET: Registered protocol family 16
[ 0.056000] pinctrl-xway 1e100b10.pinmux: Init done
[ 0.060000] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7, channels 28
[ 0.068000] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
[ 0.072000] arch/mips/pci/ifxmips_pcie_vr9.h:pcie_device_rst_assert[185]
[ 0.184000] arch/mips/pci/ifxmips_pcie_vr9.h:pcie_device_rst_deassert[193]
[ 0.188000] ath9k,eeprom ath9k_eep.8: failed to load eeprom address
[ 0.204000] bio: create slab <bio-0> at 0
[ 0.208000] usbcore: registered new interface driver usbfs
[ 0.212000] usbcore: registered new interface driver hub
[ 0.216000] usbcore: registered new device driver usb
[ 0.220000] PCI host bridge to bus 0000:00
[ 0.224000] pci_bus 0000:00: root bus resource [mem 0x1c000000-0x1cffffff]
[ 0.228000] pci_bus 0000:00: root bus resource [io 0x1d800000-0x1d8fffff]
[ 0.232000] pci_bus 0000:00: No busn resource found for root bus, will use [us 00-ff]
[ 0.236000] pci 0000:00:00.0: [1bef:0011] type 01 class 0x060000
[ 0.236000] ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to pci-pcibridge
[ 0.248000] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.248000] pci 0000:01:00.0: [168c:abcd] type 00 class 0x020000
[ 0.248000] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x0001ffff 64bit]
[ 0.248000] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.248000] pci 0000:01:00.0: supports D1
[ 0.248000] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[ 0.248000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.248000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ 0.248000] pci 0000:00:00.0: BAR 8: assigned [mem 0x1c000000-0x1c0fffff]
[ 0.252000] pci 0000:00:00.0: BAR 9: assigned [mem 0x1c100000-0x1c1fffff pre]
[ 0.256000] pci 0000:01:00.0: BAR 0: assigned [mem 0x1c000000-0x1c01ffff 64bt]
[ 0.260000] pci 0000:01:00.0: BAR 6: assigned [mem 0x1c100000-0x1c10ffff pre]
[ 0.264000] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.268000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1c0fffff]
[ 0.272000] pci 0000:00:00.0: bridge window [mem 0x1c100000-0x1c1fffff pre]
[ 0.276000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 0.280000] ifx_pcie_bios_map_irq port 0 dev 0000:00:00.0 slot 0 pin 1
[ 0.284000] ifx_pcie_bios_map_irq dev 0000:00:00.0 irq 144 assigned
[ 0.288000] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1
[ 0.292000] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
[ 0.296000] Switching to clocksource MIPS
[ 0.304000] NET: Registered protocol family 2
[ 0.308000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.316000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.320000] TCP: Hash tables configured (established 512 bind 512)
[ 0.328000] TCP: reno registered
[ 0.332000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.336000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.344000] NET: Registered protocol family 1
[ 0.348000] PCI: CLS 0 bytes, default 32
[ 0.348000] gptu: totally 6 16-bit timers/counters
[ 0.352000] gptu: misc_register on minor 63
[ 0.356000] gptu: succeeded to request irq 126
[ 0.360000] gptu: succeeded to request irq 127
[ 0.364000] gptu: succeeded to request irq 128
[ 0.372000] gptu: succeeded to request irq 129
[ 0.376000] gptu: succeeded to request irq 130
[ 0.380000] gptu: succeeded to request irq 131
[ 0.388000] phy-xrx200 gphy-xrx200.5: requesting lantiq/vr9_phy11g_a2x.bin
[ 0.396000] phy-xrx200 gphy-xrx200.5: booting GPHY0 firmware at 38C0000
[ 0.400000] phy-xrx200 gphy-xrx200.5: booting GPHY1 firmware at 38C0000
[ 0.508000] Wired TLB entries for Linux read_c0_wired() = 0
[ 0.516000] config3 0x2424 MT 1
[ 0.516000] MVPControl 0x2, STLB 0 VPC 1 EVP 0
[ 0.516000] mvpconf0 0xb8008403, PVPE 1 PTC 3 M 1
[ 0.532000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.536000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIY) (c) 2001-2006 Red Hat, Inc.
[ 0.548000] msgmni has been set to 117
[ 0.552000] io scheduler noop registered
[ 0.556000] io scheduler deadline registered (default)
[ 0.564000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112) is a laniq,asc
[ 0.568000] console [ttyLTQ0] enabled, bootconsole disabled
[ 0.588000] spi_gpio spi.7: master is unqueued, this is deprecated
[ 0.592000] m25p80 spi32766.0: found s25fl064k, expected en25q64
[ 0.596000] m25p80 spi32766.0: s25fl064k (8192 Kbytes)
[ 0.604000] 5 ofpart partitions found on MTD device spi32766.0
[ 0.608000] Creating 5 MTD partitions on "spi32766.0":
[ 0.612000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.620000] 0x000000020000-0x0000006c0000 : "firmware"
[ 0.628000] 0x000000195ff4-0x0000006c0000 : "rootfs"
[ 0.632000] mtd: partition "rootfs" must either start or end on erase block oundary or be smaller than an erase block -- forcing read-only
[ 0.644000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.652000] mtd: partition "rootfs_data" created automatically, ofs=0x5c0000 len=0x100000
[ 0.656000] 0x0000005c0000-0x0000006c0000 : "rootfs_data"
[ 1.680000] 0x0000006c0000-0x0000007c0000 : "dsl_fw"
[ 1.688000] 0x0000007c0000-0x0000007d0000 : "config"
[ 1.692000] 0x0000007d0000-0x000000800000 : "boardconfig"
[ 1.804000] libphy: lantiq,xrx200-mdio: probed
[ 1.812000] eth0: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:00, irq=-1)
[ 1.820000] eth0: attached PHY [Lantiq XWAY PEF7071] (phy_addr=0:05, irq=-1)
[ 1.828000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:1, irq=-1)
[ 1.836000] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4] (phy_addr=0:1, irq=-1)
[ 1.844000] wdt 1f8803f0.watchdog: Init done
[ 1.848000] leds-gpio gpio-leds.10: pins are not configured from the driver
[ 1.856000] TCP: cubic registered
[ 1.860000] NET: Registered protocol family 17
[ 1.864000] Bridge firewalling registered
[ 1.868000] 8021q: 802.1Q VLAN Support v1.8
[ 1.952000] ath9k,eeprom ath9k_eep.8: using led pin 0.
[ 1.956000] ath9k,eeprom ath9k_eep.8: loaded ath9k eeprom
[ 1.964000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.972000] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", errr -19
[ 2.084000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 2.088000] Freeing unused kernel memory: 244K (80443000 - 80480000)
[ 2.828000] eth0: port 0 got link
[ 2.828000] eth0: port 5 got link
[ 3.832000] eth0: port 2 got link
[ 3.856000] eth0: port 4 got link
[ 45.680000] SCSI subsystem initialized
[ 45.688000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 45.696000] ehci-platform: EHCI generic platform driver
[ 45.704000] IFXUSB: ifxusb_hcd: version 3.2 B110801
[ 45.708000] Chip Version :000c BurstSize=4
[ 46.312000] IFXUSB: USB core #0 soft-reset
[ 46.616000] IFXUSB: USB core #0 soft-reset
[ 46.616000] ifxusb_hcd ifxusb_hcd: IFX USB Controller
[ 46.624000] ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus numbr 1
[ 46.628000] ifxusb_hcd ifxusb_hcd: irq 62, io mem 0xbe101000
[ 46.636000] IFXUSB: Init: Power Port (0)
[ 46.640000] hub 1-0:1.0: USB hub found
[ 46.644000] hub 1-0:1.0: 1 port detected
[ 47.148000] IFXUSB: USB core #1 soft-reset
[ 47.452000] IFXUSB: USB core #1 soft-reset
[ 47.452000] ifxusb_hcd ifxusb_hcd: IFX USB Controller
[ 47.460000] ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus numbr 2
[ 47.468000] ifxusb_hcd ifxusb_hcd: irq 91, io mem 0xbe106000
[ 47.472000] IFXUSB: Init: Power Port (0)
[ 47.476000] hub 2-0:1.0: USB hub found
[ 47.480000] hub 2-0:1.0: 1 port detected
[ 47.484000] ifxusb_hcd ifxusb_hcd: requested GPIO 233
[ 47.492000] usbcore: registered new interface driver usb-storage
[ 47.852000] usb 1-1: new high-speed USB device number 2 using ifxusb_hcd
[ 48.176000] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 48.196000] scsi0 : usb-storage 1-1:1.0
[ 48.544000] usb 2-1: new high-speed USB device number 2 using ifxusb_hcd
[ 49.248000] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 P: 0 ANSI: 2
[ 49.272000] sd 0:0:0:0: [sda] 1952768 512-byte logical blocks: (999 MB/953 MB)
[ 49.304000] sd 0:0:0:0: [sda] Write Protect is off
[ 49.308000] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 49.360000] sd 0:0:0:0: [sda] No Caching mode page found
[ 49.364000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 49.584000] sd 0:0:0:0: [sda] No Caching mode page found
[ 49.588000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 49.744000] sda: sda1 < sda5 >
[ 49.844000] sd 0:0:0:0: [sda] No Caching mode page found
[ 49.848000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 49.856000] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 66.348000] jffs2: notice: (340) jffs2_build_xattr_subsystem: complete buildng xattr subsystem, 4 of xdatum (0 unchecked, 3 orphan) and 90 of xref (0 dead,71 orphan) found.
[ 66.384000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 66.388000] block: unable to load configuration (fstab: Entry not found)
[ 66.396000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[ 66.600000] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystm
[ 67.008000] EXT4-fs (sda5): warning: maximal mount count reached, running e2sck is recommended
[ 67.052000] EXT4-fs (sda5): recovery complete
[ 67.092000] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts:
[ 67.992000] eth0: port 0 lost link
[ 67.996000] eth0: port 5 lost link
[ 68.000000] eth0: port 2 lost link
[ 68.000000] eth0: port 4 lost link
[ 78.836000] IFXOS, Version 1.5.14 (c) Copyright 2009, Lantiq Deutschland Gmb
[ 78.836000]
[ 78.864000] NET: Registered protocol family 10
[ 78.880000] NET: Registered protocol family 8
[ 78.880000] NET: Registered protocol family 20
[ 78.900000] l2tp_core: L2TP core driver, V2.0
[ 78.908000] l2tp_netlink: L2TP netlink interface
[ 78.920000] gre: GRE over IPv4 demultiplexor driver
[ 78.928000] ip_gre: GRE over IPv4 tunneling driver
[ 78.948000] PPP generic driver version 2.4.2
[ 78.972000] nf_conntrack version 0.5.0 (942 buckets, 3768 max)
[ 78.984000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 79.016000] MEI CPE Driver, Version 1.2.0
[ 79.016000]
[ 79.016000] (c) Copyright 2009, Infineon Technologies AG
### MEI CPE - MEI CPE - MEI CPE - MEI CPE ###
[ 79.024000]
[ 79.024000]
[ 79.024000] Lantiq CPE API Driver version: DSL CPE API V4.11.4
[ 79.068000]
[ 79.068000] Predefined debug level: 2
[ 79.116000] Linux video capture interface: v2.00
[ 79.156000] u32 classifier
[ 79.156000] input device check on
[ 79.160000] Actions configured
[ 79.168000] Mirror/redirect action on
[ 79.188000] fuse init (API version 7.22)
[ 79.252000] usbcore: registered new interface driver cdc_acm
[ 79.256000] cdc_acm: USB Abstract Control Model driver for USB modems and ISN adapters
[ 79.268000] usbcore: registered new interface driver cdc_wdm
[ 79.280000] Loading modules backported from Linux version master-2014-05-22--gf2032ea
[ 79.284000] Backport generated by backports.git backports-20140320-37-g5c33d0
[ 79.308000] gspca_main: v2.14.0 registered
[ 79.316000] usbcore: registered new interface driver ov519
[ 79.324000] usbcore: registered new interface driver ov534
[ 79.332000] usbcore: registered new interface driver ov534_9
[ 79.340000] usbcore: registered new interface driver pac207
[ 79.348000] usbcore: registered new interface driver gspca_sn9c20x
[ 79.364000] usbcore: registered new interface driver sonixb
[ 79.372000] usbcore: registered new interface driver sonixj
[ 79.380000] usbcore: registered new interface driver spca500
[ 79.388000] usbcore: registered new interface driver spca501
[ 79.396000] usbcore: registered new interface driver spca505
[ 79.404000] usbcore: registered new interface driver spca506
[ 79.408000] usbcore: registered new interface driver spca508
[ 79.416000] usbcore: registered new interface driver spca561
[ 79.428000] usbcore: registered new interface driver sq905
[ 79.444000] usbcore: registered new interface driver sq905c
[ 79.452000] usbcore: registered new interface driver stk014
[ 79.472000] usbcore: registered new interface driver STV06xx
[ 79.484000] usbcore: registered new interface driver sunplus
[ 79.492000] usbcore: registered new interface driver t613
[ 79.500000] usbcore: registered new interface driver tv8532
[ 79.512000] usbcore: registered new interface driver gspca_zc3xx
[ 79.520000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 79.544000] Infineon Technologies DEU driver version 2.0.0
[ 79.548000] IFX DEU DES initialized (multiblock).
[ 79.560000] IFX DEU AES initialized (multiblock).
[ 79.564000] IFX DEU ARC4 initialized (multiblock).
[ 79.572000] IFX DEU SHA1 initialized.
[ 79.576000] IFX DEU MD5 initialized.
[ 79.576000] IFX DEU SHA1_HMAC initialized.
[ 79.580000] IFX DEU MD5_HMAC initialized.
[ 79.648000] PPP MPPE Compression module registered
[ 79.652000] NET: Registered protocol family 24
[ 79.660000] PPTP driver version 0.8.5
[ 79.668000] usbcore: registered new interface driver usblp
[ 79.688000] usbcore: registered new interface driver usbserial
[ 79.692000] usbcore: registered new interface driver usbserial_generic
[ 79.700000] usbserial: USB Serial support registered for generic
[ 79.712000] uvcvideo: Found UVC 1.00 device VF0520 Live! Cam Sync (041e:406c
[ 79.792000] input: VF0520 Live! Cam Sync as /devices/platform/ifxusb_hcd/usb/2-1/2-1:1.0/input/input0
[ 79.804000] usbcore: registered new interface driver uvcvideo
[ 79.808000] USB Video Class driver (1.1.1)
[ 79.896000] xt_time: kernel timezone is -0000
[ 79.908000] usbcore: registered new interface driver cdc_ether
[ 79.924000] usbcore: registered new interface driver cdc_ncm
[ 79.976000] cfg80211: Calling CRDA to update world regulatory domain
[ 79.988000] cfg80211: World regulatory domain updated:
[ 79.988000] cfg80211: DFS Master region: unset
[ 79.996000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gan, max_eirp), (dfs_cac_time)
[ 80.004000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 Bm), (N/A)
[ 80.012000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 Bm), (N/A)
[ 80.020000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 Bm), (N/A)
[ 80.028000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000mBm), (N/A)
[ 80.036000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000mBm), (0 s)
[ 80.044000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000mBm), (0 s)
[ 80.052000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 Bm), (N/A)
[ 80.060000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0mBm), (N/A)
[ 80.068000] usbcore: registered new interface driver huawei_cdc_ncm
[ 80.092000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 80.184000] usbcore: registered new interface driver qmi_wwan
[ 80.192000] usbcore: registered new interface driver rndis_host
[ 80.200000] usbcore: registered new interface driver sierra
[ 80.204000] usbserial: USB Serial support registered for Sierra USB modem
[ 80.216000] usbcore: registered new interface driver sierra_net
[ 80.272000] usbcore: registered new interface driver option
[ 80.280000] usbserial: USB Serial support registered for GSM modem (1-port)
[ 80.304000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[ 80.312000] ath: EEPROM regdomain: 0x0
[ 80.312000] ath: EEPROM indicates default country code should be used
[ 80.312000] ath: doing EEPROM country->regdmn map search
[ 80.312000] ath: country maps to regdmn code: 0x3a
[ 80.312000] ath: Country alpha2 being used: US
[ 80.312000] ath: Regpair used: 0x3a
[ 80.324000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 80.336000] cfg80211: Calling CRDA for country: US
[ 80.340000] cfg80211: Regulatory domain changed to country: US
[ 80.344000] cfg80211: DFS Master region: FCC
[ 80.348000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gan, max_eirp), (dfs_cac_time)
[ 80.360000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 Bm), (N/A)
[ 80.368000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 Bm), (N/A)
[ 80.376000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 Bm), (0 s)
[ 80.384000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 Bm), (N/A)
[ 80.392000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 400 mBm), (N/A)
[ 80.400000] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xbc000000, irq=144
[ 97.052000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 97.064000] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
[ 97.072000] device eth0.1 entered promiscuous mode
[ 97.072000] device eth0 entered promiscuous mode
[ 97.096000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 97.212000] eth0: port 0 got link
[ 97.212000] eth0: port 5 got link
[ 97.232000] eth0: port 2 got link
[ 97.232000] eth0: port 4 got link
[ 97.248000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 97.252000] br-lan: port 1(eth0.1) entered forwarding state
[ 97.260000] br-lan: port 1(eth0.1) entered forwarding state
[ 97.264000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 97.304000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 99.264000] br-lan: port 1(eth0.1) entered forwarding state
[ 117.556000] ATM1.0.26 ATM (A1) firmware version 0.24
[ 117.560000] ifxmips_atm: ATM init succeed
[ 135.468000] eth0: port 2 lost link
[ 135.468000] br-lan: port 1(eth0.1) entered disabled state
[ 135.520000] br-lan: port 1(eth0.1) entered forwarding state
[ 135.524000] br-lan: port 1(eth0.1) entered forwarding state
[ 137.468000] eth0: port 2 got link
[ 137.528000] br-lan: port 1(eth0.1) entered forwarding state
[ 139.920000] uvcvideo: Failed to query (GET_DEF) UVC control 2 on unit 3: 0 (xp. 2).
[ 139.936000] uvcvideo: Failed to query (GET_DEF) UVC control 2 on unit 3: 0 (xp. 2).
[ 139.968000] uvcvideo: Failed to query (GET_DEF) UVC control 3 on unit 3: 0 (xp. 2).
[ 140.000000] uvcvideo: Failed to query (GET_DEF) UVC control 7 on unit 3: 0 (xp. 2).
[ 140.008000] uvcvideo: Failed to query (GET_DEF) UVC control 6 on unit 3: 0 (xp. 2).
[ 140.032000] uvcvideo: Failed to query (GET_DEF) UVC control 9 on unit 3: 0 (xp. 2).
[ 140.052000] uvcvideo: Failed to query (GET_DEF) UVC control 5 on unit 3: 0 (xp. 1).
[ 140.060000] uvcvideo: Failed to query (GET_DEF) UVC control 10 on unit 3: 0 exp. 2).
[ 140.068000] uvcvideo: Failed to query (GET_DEF) UVC control 8 on unit 3: 0 (xp. 2).
[ 140.092000] uvcvideo: Failed to query (GET_DEF) UVC control 1 on unit 3: 0 (xp. 2).
[ 140.260000] IFXUSB: ISOC transfer not supported!!!
[ 140.264000] uvcvideo: Failed to submit URB 0 (-19).
[ 164.564000] enter showtime, cell rate: 0 - 2716, 1 - 2716, xdata addr: 0x8250000
[ 164.576000] enter showtime, cell rate: 0 - 2716, 1 - 2716, xdata addr: 0x8250000
[ 168.600000] leave showtime
[ 201.008000] enter showtime, cell rate: 0 - 2716, 1 - 2716, xdata addr: 0x8250000
[ 201.020000] enter showtime, cell rate: 0 - 2716, 1 - 2716, xdata addr: 0x8250000
[ 392.344000] uvcvideo: Failed to query (GET_DEF) UVC control 2 on unit 3: 0 (xp. 2).
[ 392.368000] uvcvideo: Failed to query (GET_DEF) UVC control 2 on unit 3: 0 (xp. 2).
[ 392.380000] uvcvideo: Failed to query (GET_DEF) UVC control 3 on unit 3: 0 (xp. 2).
[ 392.392000] uvcvideo: Failed to query (GET_DEF) UVC control 7 on unit 3: 0 (xp. 2).
[ 392.404000] uvcvideo: Failed to query (GET_DEF) UVC control 6 on unit 3: 0 (xp. 2).
[ 392.416000] uvcvideo: Failed to query (GET_DEF) UVC control 9 on unit 3: 0 (xp. 2).
[ 392.428000] uvcvideo: Failed to query (GET_DEF) UVC control 5 on unit 3: 0 (xp. 1).
[ 392.440000] uvcvideo: Failed to query (GET_DEF) UVC control 10 on unit 3: 0 exp. 2).
[ 392.452000] uvcvideo: Failed to query (GET_DEF) UVC control 8 on unit 3: 0 (xp. 2).
[ 392.464000] uvcvideo: Failed to query (GET_DEF) UVC control 1 on unit 3: 0 (xp. 2).
[ 392.604000] IFXUSB: ISOC transfer not supported!!!
[ 392.608000] uvcvideo: Failed to submit URB 0 (-19).
[ 408.804000] uvcvideo: Failed to query (GET_DEF) UVC control 2 on unit 3: 0 (xp. 2).
[ 408.828000] uvcvideo: Failed to query (GET_DEF) UVC control 2 on unit 3: 0 (xp. 2).
[ 408.840000] uvcvideo: Failed to query (GET_DEF) UVC control 3 on unit 3: 0 (xp. 2).
[ 408.852000] uvcvideo: Failed to query (GET_DEF) UVC control 7 on unit 3: 0 (xp. 2).
[ 408.864000] uvcvideo: Failed to query (GET_DEF) UVC control 6 on unit 3: 0 (xp. 2).
[ 408.876000] uvcvideo: Failed to query (GET_DEF) UVC control 9 on unit 3: 0 (xp. 2).
[ 408.892000] uvcvideo: Failed to query (GET_DEF) UVC control 5 on unit 3: 0 (xp. 1).
[ 408.904000] uvcvideo: Failed to query (GET_DEF) UVC control 10 on unit 3: 0 exp. 2).
[ 408.912000] uvcvideo: Failed to query (GET_DEF) UVC control 8 on unit 3: 0 (xp. 2).
[ 408.920000] uvcvideo: Failed to query (GET_DEF) UVC control 1 on unit 3: 0 (xp. 2).
[ 409.060000] IFXUSB: ISOC transfer not supported!!!
[ 409.064000] uvcvideo: Failed to submit URB 0 (-19).
[ 464.632000] uvcvideo: Failed to query (GET_DEF) UVC control 2 on unit 3: 0 (xp. 2).
[ 464.640000] uvcvideo: Failed to query (GET_DEF) UVC control 3 on unit 3: 0 (xp. 2).
[ 464.648000] uvcvideo: Failed to query (GET_DEF) UVC control 7 on unit 3: 0 (xp. 2).
[ 464.656000] uvcvideo: Failed to query (GET_DEF) UVC control 6 on unit 3: 0 (xp. 2).
[ 464.664000] uvcvideo: Failed to query (GET_DEF) UVC control 9 on unit 3: 0 (xp. 2).
[ 464.800000] IFXUSB: ISOC transfer not supported!!!
[ 464.804000] uvcvideo: Failed to submit URB 0 (-19).
root@OpenWrt:~#