root@WDR3600:~# /etc/init.d/mpd restart
BusyBox v1.19.4 (2014-09-27 10:09:18 CEST) multi-call binary.

Usage: nice [-n ADJUST] [PROG ARGS]

Change scheduling priority, run PROG

        -n ADJUST       Adjust priority by ADJUST

output: No "audio_output" defined in config file
output: Attempt to detect audio output device
output: Attempting to detect a alsa audio device
output: Successfully detected a alsa audio device
root@WDR3600:~# mpc
error: Connection refused

# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.


# Files and directories #######################################################
#
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This 
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
#
music_directory        "/tmp/usb_mount/d335bfb5-e42b-4d50-a396-54daddc0f7e0/Dane/Muzyka"
#
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use 
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
#
playlist_directory        "/tmp/usb_mount/d335bfb5-e42b-4d50-a396-54daddc0f7e0/Dane/Playlisty"
#
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the 
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
#
db_file            "/tmp/usb_mount/d335bfb5-e42b-4d50-a396-54daddc0f7e0/mpd/database"
# 
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
#
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
#
log_file            "/tmp/usb_mount/d335bfb5-e42b-4d50-a396-54daddc0f7e0/mpd/log"
#
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
#
pid_file            "/tmp/usb_mount/d335bfb5-e42b-4d50-a396-54daddc0f7e0/mpd/pid"
#
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server 
# state will be reset on server start up.
#
state_file            "/tmp/usb_mount/d335bfb5-e42b-4d50-a396-54daddc0f7e0/mpd/state"
#
# The location of the sticker database.  This is a database which
# manages dynamic information attached to songs.
#
#sticker_file            "~/.mpd/sticker.sql"
#
###############################################################################


# General music daemon options ################################################
#
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
#
#user                "user"
#
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
#
#group                "nogroup"
#
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
#
# For network
bind_to_address        "192.168.1.1"
#
# And for Unix Socket
#bind_to_address        "~/.mpd/socket"
#
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#
port                "6600"
#
# This setting controls the type of information which is logged. Available 
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#
log_level            "default"
#
# If you have a problem with your MP3s ending abruptly it is recommended that 
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#
#gapless_mp3_playback            "yes"
#
# This setting enables MPD to create playlists in a format usable by other
# music players.
#
#save_absolute_paths_in_playlists    "no"
#
# This setting defines a list of tag types that will be extracted during the 
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#
#metadata_to_use    "artist,album,title,track,name,genre,date,composer,performer,disc"
#
# This setting enables automatic update of MPD's database when files in 
# music_directory are changed.
#
auto_update    "yes"
#
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself.  There is no limit by default.
#
#auto_update_depth "3"
#
###############################################################################


# Symbolic link behavior ######################################################
#
# If this setting is set to "yes", MPD will discover audio files by following 
# symbolic links outside of the configured music_directory.
#
#follow_outside_symlinks    "yes"
#
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#
#follow_inside_symlinks        "yes"
#
###############################################################################


# Zeroconf / Avahi Service Discovery ##########################################
#
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#
#zeroconf_enabled        "yes"
#
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#
#zeroconf_name            "Music Player"
#
###############################################################################


# Permissions #################################################################
#
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#
#password                        "password@read,add,control,admin"
#
# This setting specifies the permissions a user has who has not yet logged in. 
#
#default_permissions             "read,add,control,admin"
#
###############################################################################


# Input #######################################################################
#

input {
        plugin "curl"
#       proxy "proxy.isp.com:8080"
#       proxy_user "user"
#       proxy_password "password"
}

#
###############################################################################

# Audio Output ################################################################
#
# MPD supports various audio output types, as well as playing through multiple 
# audio outputs at the same time, through multiple audio_output settings 
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
#
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of 
# other audio outputs.
#
# An example of an ALSA output:
#
#audio_output {
#    type        "alsa"
#    name        "My ALSA Device"
##    device        "hw:0,0"    # optional
##    format        "44100:16:2"    # optional
    mixer_type      "software"    # optional
##    mixer_device    "default"    # optional
##    mixer_control    "PCM"        # optional
##    mixer_index    "0"        # optional
#}
#
# An example of an OSS output:
#
#audio_output {
#    type        "oss"
#    name        "My OSS Device"
##    device        "/dev/dsp"    # optional
##    format        "44100:16:2"    # optional
##    mixer_type      "hardware"    # optional
##    mixer_device    "/dev/mixer"    # optional
##    mixer_control    "PCM"        # optional
#}
#
# An example of a shout output (for streaming to Icecast):
#
#audio_output {
#    type        "shout"
#    encoding    "ogg"            # optional
#    name        "My Shout Stream"
#    host        "localhost"
#    port        "8000"
#    mount        "/mpd.ogg"
#    password    "hackme"
#    quality        "5.0"
#    bitrate        "128"
#    format        "44100:16:1"
##    protocol    "icecast2"        # optional
##    user        "source"        # optional
##    description    "My Stream Description"    # optional
##    genre        "jazz"            # optional
##    public        "no"            # optional
##    timeout        "2"            # optional
##    mixer_type      "software"        # optional
#}
#
# An example of a recorder output:
#
#audio_output {
#    type        "recorder"
#    name        "My recorder"
#    encoder        "vorbis"        # optional, vorbis or lame
#    path        "/var/lib/mpd/recorder/mpd.ogg"
##    quality        "5.0"            # do not define if bitrate is defined
#    bitrate        "128"            # do not define if quality is defined
#    format        "44100:16:1"
#}
#
# An example of a httpd output (built-in HTTP streaming server):
#
#audio_output {
#    type        "httpd"
#    name        "My HTTP Stream"
#    encoder        "vorbis"        # optional, vorbis or lame
#    port        "8000"
#    bind_to_address    "0.0.0.0"        # optional, IPv4 or IPv6
##    quality        "5.0"            # do not define if bitrate is defined
#    bitrate        "128"            # do not define if quality is defined
#    format        "44100:16:1"
#    max_clients    "0"            # optional 0=no limit
#}
#
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#
#audio_output {
#    type        "pulse"
#    name        "My Pulse Output"
##    server        "remote_server"        # optional
##    sink        "remote_server_sink"    # optional
#}
#
## Example "pipe" output:
#
#audio_output {
#    type        "pipe"
#    name        "my pipe"
#    command        "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
#    command        "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
#    command        "nc example.org 8765"
#    format        "44100:16:2"
#}
#
## An example of a null output (for no audio output):
#
#audio_output {
#    type        "null"
#    name        "My Null Output"
#    mixer_type      "none"            # optional
#}
#
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#
#audio_output_format        "44100:16:2"
#
# If MPD has been compiled with libsamplerate support, this setting specifies 
# the sample rate converter to use.  Possible values can be found in the 
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#
#samplerate_converter        "Fastest Sinc Interpolator"
#
###############################################################################


# Normalization automatic volume adjustments ##################################
#
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album" or "track". See <http://www.replaygain.org>
# for more details. This setting is off by default.
#
#replaygain            "album"
#
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#
#replaygain_preamp        "0"
#
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has 
# equal "loudness". This setting is disabled by default.
#
#volume_normalization        "no"
#
###############################################################################


# MPD Internal Buffering ######################################################
#
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#
#audio_buffer_size        "2048"
#
# This setting controls the percentage of the buffer which is filled before 
# beginning to play. Increasing this reduces the chance of audio file skipping, 
# at the cost of increased time prior to audio playback.
#
#buffer_before_play        "10%"
#
###############################################################################


# Resource Limitations ########################################################
#
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#
#connection_timeout        "60"
#max_connections        "10"
#max_playlist_length        "16384"
#max_command_list_size        "2048"
#max_output_buffer_size        "8192"
#
###############################################################################


# Character Encoding ##########################################################
#
# If file or directory names do not display correctly for your locale then you 
# may need to modify this setting.
#
filesystem_charset        "UTF-8"
#
# This setting controls the encoding that ID3v1 tags should be converted from.
#
#id3v1_encoding            "ISO-8859-1"
#
###############################################################################


# SIDPlay decoder #############################################################
#
# songlength_database:
#  Location of your songlengths file, as distributed with the HVSC.
#  The sidplay plugin checks this for matching MD5 fingerprints.
#  See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
#
# default_songlength:
#  This is the default playing time in seconds for songs not in the
#  songlength database, or in case you're not using a database.
#  A value of 0 means play indefinitely.
#
# filter:
#  Turns the SID filter emulation on or off.
#
#decoder {
#    plugin            "sidplay"
#    songlength_database    "/media/C64Music/DOCUMENTS/Songlengths.txt"
#    default_songlength    "120"
#    filter "true"
#}
#
###############################################################################

Feb 11 23:51 : inotify: auto_update was disabled. enable during compilation phase
Feb 11 23:53 : inotify: auto_update was disabled. enable during compilation phase
Feb 11 23:59 : inotify: auto_update was disabled. enable during compilation phase
Feb 12 00:09 : inotify: auto_update was disabled. enable during compilation phase
Feb 12 00:12 : inotify: auto_update was disabled. enable during compilation phase
Feb 12 00:25 : inotify: auto_update was disabled. enable during compilation phase
Feb 12 00:31 : inotify: auto_update was disabled. enable during compilation phase