51 Odpowiedź przez tenobcy

  • Zarejestrowany: 2013-08-15
  • Posty: 450

Odp: Zapasowe łącze na modemie GSM

root@OpenWrt:~# ls -al /usr/bin/simplefailover
-rwxr-xr-x    1 root     root          1360 Nov 16 18:40 /usr/bin/simplefailover

52 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,432

Odp: Zapasowe łącze na modemie GSM

No to jeszcze raz: sh -x /usr/bin/simplefailover

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

53 Odpowiedź przez tenobcy

  • Zarejestrowany: 2013-08-15
  • Posty: 450

Odp: Zapasowe łącze na modemie GSM

Ok poszło, w pierwszej konsoli:

root@OpenWrt:~# sh -x /usb/bin/simplefailover
sh: can't open '/usb/bin/simplefailover'
root@OpenWrt:~# sh -x /usr/bin/simplefailover
+ uci -q get simplefailover.@simplefailover[0].wan_main
+ WAN1=wan
+ uci -q get simplefailover.@simplefailover[0].wan_backup
+ WAN2=wan2
+ uci -q get simplefailover.@simplefailover[0].host
+ HOST=8.8.4.4
+ uci -q get simplefailover.@simplefailover[0].interval
+ INTERVAL=3
+ uci -q get -P /var/state network.wan.ifname
+ IFNAME=eth0.2
+ [ xeth0.2 = x ]
+ uci -q get -P /var/state network.wan.gateway
+ GATEWAY=
+ [ x = x ]
+ + grepawk -A /nexthop/ {gsub(/"/, "");print $2} 2
 "target": "0.0.0.0",
+ ifstatus wan
+ GATEWAY=192.168.1.254,
+ [ x192.168.1.254, = x ]
+ WAN=1
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ awk+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
 /packets received/ {print $4}
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3

i po odłączeniu kabla:

root@OpenWrt:~# sh -x /usr/bin/simplefailover
+ uci -q get simplefailover.@simplefailover[0].wan_main
+ WAN1=wan
+ uci -q get simplefailover.@simplefailover[0].wan_backup
+ WAN2=wan2
+ uci -q get simplefailover.@simplefailover[0].host
+ HOST=8.8.4.4
+ uci -q get simplefailover.@simplefailover[0].interval
+ INTERVAL=3
+ uci -q get -P /var/state network.wan.ifname
+ IFNAME=eth0.2
+ [ xeth0.2 = x ]
+ uci -q get -P /var/state network.wan.gateway
+ GATEWAY=
+ [ x = x ]
+ + grepawk -A /nexthop/ {gsub(/"/, "");print $2} 2
 "target": "0.0.0.0",
+ ifstatus wan
+ GATEWAY=192.168.1.254,
+ [ x192.168.1.254, = x ]
+ WAN=1
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ awk+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
 /packets received/ {print $4}
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ + ping -I eth0.2 -w 3 -c 3 8.8.4.4
awk /packets received/ {print $4}
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ awk+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
 /packets received/ {print $4}
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ awk /packets received/ {print $4}
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=3
+ [ x3 = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep 3
+ + pingawk -I /packets received/ {print $4} eth0.2
 -w 3 -c 3 8.8.4.4
+ PR=0
+ [ x0 = x0 ]
+ [ 1 = 1 ]
+ WAN=2
+ ifup wan2
+ route add -host 8.8.4.4 gateway 192.168.1.254, eth0.2
route: resolving 192.168.1.254,
+ logger -t /usr/bin/simplefailover Changing connection to backup wan: wan2
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=0
+ [ x0 = x0 ]
+ [ 2 = 1 ]
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=0
+ [ x0 = x0 ]
+ [ 2 = 1 ]
+ true
+ sleep 3
+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3 8.8.4.4
+ PR=0
+ [ x0 = x0 ]
+ [ 2 = 1 ]
+ true
+ sleep 3

i route -n

root@OpenWrt:~# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         10.64.64.64     0.0.0.0         UG    0      0        0 3g-wan2
10.64.64.64     0.0.0.0         255.255.255.255 UH    0      0        0 3g-wan2
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0.2
192.168.3.0     0.0.0.0         255.255.255.0   U     0      0        0 br-lan

54 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,432

Odp: Zapasowe łącze na modemie GSM

Taa, przecinek jest zbędny. Poczekaj do wieczora.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

55 Odpowiedź przez tenobcy

  • Zarejestrowany: 2013-08-15
  • Posty: 450

Odp: Zapasowe łącze na modemie GSM

Gdzie przecinek?

56 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,432

Odp: Zapasowe łącze na modemie GSM

tenobcy napisał/a:

Gdzie przecinek?

W odczycie gatewaya, więc nie ustawia poprawnie trasy do hosta 8.8.4.4, więc nie ma jak później na wan go pingować i nie przełącza go znów.
Pytanie tylko dlaczego masz tam ten przecinek, bo mam to działające na kilku hostach i nie znalazłem takiego problemu.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

57 Odpowiedź przez tenobcy (edytowany przez tenobcy 2014-12-29 12:16:06)

  • Zarejestrowany: 2013-08-15
  • Posty: 450

Odp: Zapasowe łącze na modemie GSM

Nie wiem ja to instalowałem i konfigurowałem na czystym obrazie bez luci i bez żadnych zbędnych pakietów. Mogę sam to w jakiś prosty sposób poprawić czy musisz od nowa cały pakiet/skrypt kompilować?

58 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,432

Odp: Zapasowe łącze na modemie GSM

tenobcy napisał/a:

Nie wiem ja to instalowałem i konfigurowałem na czystym obrazie bez luci i bez żadnych zbędnych pakietów. Mogę sam to w jakiś prosty sposób poprawić czy musisz od nowa cały pakiet/skrypt kompilować?

Możesz. W skrypcie jest

 GATEWAY=$(ifstatus $WAN1 | grep -A 2 "\"target\": \"0.0.0.0\"," | awk '/nexthop/ {gsub(/"/, "");print $2}')

zmień to na 

 GATEWAY=$(ifstatus $WAN1 | grep -A 2 "\"target\": \"0.0.0.0\"," | awk '/nexthop/ {gsub(/"/, "");print $2}') | sed -e 's/,//'

Głupie, ale wytnie zbędne rzeczy.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

59 Odpowiedź przez tenobcy

  • Zarejestrowany: 2013-08-15
  • Posty: 450

Odp: Zapasowe łącze na modemie GSM

W takiej postaci ten skrypt ma być? Jeżeli tak to teraz nie przełącza przy zaniku z kabla na modem

#!/bin/sh                                                        
                                                                 
# (c) 2010-2014 Cezary Jackiewicz <cezary@eko.one.pl>            
                                                                 
WAN1=$(uci -q get simplefailover.@simplefailover[0].wan_main)    
WAN2=$(uci -q get simplefailover.@simplefailover[0].wan_backup)  
HOST=$(uci -q get simplefailover.@simplefailover[0].host)        
INTERVAL=$(uci -q get simplefailover.@simplefailover[0].interval)
                                                                                                                             
IFNAME=$(uci -q get -P /var/state network.$WAN1.ifname)                                                                      
if [ "x$IFNAME" = "x" ]; then                                                                                                
    MSG="Lack of physical interface ($WAN1)!"                                                                                
    logger -t $0 $MSG                                                                                                        
    echo $MSG                                                                                                                
    exit 0                                                                                                                   
fi                                                                                                                           
                                                                                                                             
GATEWAY=$(uci -q get -P /var/state network.$WAN1.gateway)                                                                    
                                                                                                                             
if [ "x$GATEWAY" = "x" ]; then                                                                                               
 GATEWAY=$(ifstatus $WAN1 | grep -A 2 "\"target\": \"0.0.0.0\"," | awk '/nexthop/ {gsub(/"/, "");print $2}') | sed -e 's/,//'
fi                                                                                             
                                                                                               
if [ "x$GATEWAY" = "x" ]; then                                                                 
    MSG="No gateway on $WAN1?"                                                                 
    logger -t $0 $MSG                                                                          
    echo $MSG                                                                                  
    exit 0                                                                                     
fi                                                                                             
                                                                                               
WAN=1                                                                                          
while true; do                                                                                 
        sleep $INTERVAL                                                                        
        PR=$(ping -I $IFNAME -w 3 -c 3 $HOST 2>/dev/null | awk '/packets received/ {print $4}')
        if [ "x$PR" = "x0" ]; then                                             
                if [ "$WAN" = "1" ]; then                                      
                        WAN=2                                                  
                        ifup $WAN2                                             
                        route add -host $HOST gateway $GATEWAY $IFNAME   
                        logger -t $0 "Changing connection to backup wan: $WAN2"                
                fi                                                                             
        else                                                                                   
                if [ "$WAN" = "2" ]; then                                                      
                        WAN=1                                                                  
                        route del -host $HOST gateway $GATEWAY $IFNAME                         
                        ifdown $WAN2                                                           
                        route add default gw $GATEWAY $IFNAME                  
                        logger -t $0 "Changing connection to main wan: $WAN1"  
                fi                                                             
        fi                                                                     
done

60 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,432

Odp: Zapasowe łącze na modemie GSM

I dawaj to samo - sprawdź jak wygląda route, jak wygląda debug skryptu.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

61 Odpowiedź przez tenobcy (edytowany przez tenobcy 2014-12-29 12:37:32)

  • Zarejestrowany: 2013-08-15
  • Posty: 450

Odp: Zapasowe łącze na modemie GSM

No to teraz jest tylko tyle i skrypt dalej nie wykonuje się, a po odpięciu kabla nie przełącza na połączenie modemowe

root@OpenWrt:~# sh -x /usr/bin/simplefailover
+ uci -q get simplefailover.@simplefailover[0].wan_main
+ WAN1=wan
+ uci -q get simplefailover.@simplefailover[0].wan_backup
+ WAN2=wan2
+ uci -q get simplefailover.@simplefailover[0].host
+ HOST=8.8.4.4
+ uci -q get simplefailover.@simplefailover[0].interval
+ INTERVAL=3
+ uci -q get -P /var/state network.wan.ifname
+ IFNAME=eth0.2
+ [ xeth0.2 = x ]
+ uci -q get -P /var/state network.wan.gateway
+ GATEWAY=
+ [ x = x ]
+ sed -e s/,//
+ + + ifstatusgrepawk wan -A /nexthop/ {gsub(/"/, "");print $2}
 2
 "target": "0.0.0.0",
+ GATEWAY=192.168.1.254,
+ [ x = x ]
+ MSG=No gateway on wan?
+ logger -t /usr/bin/simplefailover No gateway on wan?
+ echo No gateway on wan?
No gateway on wan?
+ exit 0
root@OpenWrt:~# sh -x /usr/bin/simplefailover
+ uci -q get simplefailover.@simplefailover[0].wan_main
+ WAN1=wan
+ uci -q get simplefailover.@simplefailover[0].wan_backup
+ WAN2=wan2
+ uci -q get simplefailover.@simplefailover[0].host
+ HOST=8.8.4.4
+ uci -q get simplefailover.@simplefailover[0].interval
+ INTERVAL=3
+ uci -q get -P /var/state network.wan.ifname
+ IFNAME=eth0.2
+ [ xeth0.2 = x ]
+ uci -q get -P /var/state network.wan.gateway
+ GATEWAY=
+ [ x = x ]
+ sed -e s/,//
+ + + ifstatusgrepawk wan -A /nexthop/ {gsub(/"/, "");print $2}
 2
 "target": "0.0.0.0",
+ GATEWAY=192.168.1.254,
+ [ x = x ]
+ MSG=No gateway on wan?
+ logger -t /usr/bin/simplefailover No gateway on wan?
+ echo No gateway on wan?
No gateway on wan?
+ exit 0
root@OpenWrt:~# sh -x /usr/bin/simplefailover
+ uci -q get simplefailover.@simplefailover[0].wan_main
+ WAN1=wan
+ uci -q get simplefailover.@simplefailover[0].wan_backup
+ WAN2=wan2
+ uci -q get simplefailover.@simplefailover[0].host
+ HOST=8.8.4.4
+ uci -q get simplefailover.@simplefailover[0].interval
+ INTERVAL=3
+ uci -q get -P /var/state network.wan.ifname
+ IFNAME=eth0.2
+ [ xeth0.2 = x ]
+ uci -q get -P /var/state network.wan.gateway
+ GATEWAY=
+ [ x = x ]
+ sed -e s/,//
+ + + ifstatusgrepawk wan -A /nexthop/ {gsub(/"/, "");print $2}
 2
 "target": "0.0.0.0",
+ GATEWAY=192.168.1.254,
+ [ x = x ]
+ MSG=No gateway on wan?
+ logger -t /usr/bin/simplefailover No gateway on wan?
+ echo No gateway on wan?
No gateway on wan?
+ exit 0
root@OpenWrt:~#

route -n 

root@OpenWrt:~# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.1.254   0.0.0.0         UG    0      0        0 eth0.2
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0.2
192.168.3.0     0.0.0.0         255.255.255.0   U     0      0        0 br-lan

62 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,432

Odp: Zapasowe łącze na modemie GSM

Ale teraz coś zepsułeś go jawnie wyświetla że nie ma gatewaya.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

63 Odpowiedź przez tenobcy (edytowany przez tenobcy 2014-12-29 12:46:46)

  • Zarejestrowany: 2013-08-15
  • Posty: 450

Odp: Zapasowe łącze na modemie GSM

No tylko zamieniłem tą linię. Przywróciłem starą konfigurację (linię) i znowu wszystko działa tak jak przed zamianą.

64 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,432

Odp: Zapasowe łącze na modemie GSM

Poczekaj do wieczora.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

65 Odpowiedź przez tenobcy (edytowany przez tenobcy 2014-12-29 13:06:11)

  • Zarejestrowany: 2013-08-15
  • Posty: 450

Odp: Zapasowe łącze na modemie GSM

Ok to czekam do wieczora tongue

66 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,432

Odp: Zapasowe łącze na modemie GSM

Pakiet jest w repo. Odinstaluj stary i zainstaluj nową wersję. Jak diagnozować już wiesz.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

67 Odpowiedź przez tenobcy

  • Zarejestrowany: 2013-08-15
  • Posty: 450

Odp: Zapasowe łącze na modemie GSM

Daje sobie z tym spokój szkoda moich nerwów sad Teraz to po ubiciu procesu i wykonaniu sh -x /usb/bin/simplefailover nie skopiuje nic bo logi zapieprzają jak szalone nie dając się skopiować, a po wypięciu kabla z internetem nie przełącza na połączenie modemowe po ręcznym wydaniu ifup wan2 łączy przez modem ale po wpięciu kabla nie wraca i tak cały czas, a próbuję już kilkanaście razy hmm

68 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,432

Odp: Zapasowe łącze na modemie GSM

Pokaż te logi co się dzieje.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

69 Odpowiedź przez tenobcy

  • Zarejestrowany: 2013-08-15
  • Posty: 450

Odp: Zapasowe łącze na modemie GSM

Tylko te z logread mogę pokazać bo z sh -x /usb/bin/simplefailover nie skopiuję cały czas mieli nie dając się skopiować

Mon Dec 29 22:24:04 2014 daemon.info dnsmasq[1358]: using local addresses only for domain lan
Mon Dec 29 22:24:04 2014 daemon.info dnsmasq[1358]: using nameserver 192.168.1.254#53
Mon Dec 29 22:24:04 2014 daemon.info dnsmasq[1358]: read /etc/hosts - 1 addresses
Mon Dec 29 22:24:04 2014 daemon.info dnsmasq[1358]: read /tmp/hosts/dhcp - 1 addresses
Mon Dec 29 22:24:04 2014 daemon.info dnsmasq-dhcp[1358]: read /etc/ethers - 0 addresses
Mon Dec 29 22:24:05 2014 daemon.info dnsmasq[1358]: exiting on receipt of SIGTERM
Mon Dec 29 22:24:05 2014 daemon.info dnsmasq[1412]: started, version 2.71 cachesize 150
Mon Dec 29 22:24:05 2014 daemon.info dnsmasq[1412]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
Mon Dec 29 22:24:05 2014 daemon.info dnsmasq-dhcp[1412]: DHCP, IP range 192.168.3.100 -- 192.168.3.249, lease time 12h
Mon Dec 29 22:24:05 2014 daemon.info dnsmasq[1412]: using local addresses only for domain lan
Mon Dec 29 22:24:05 2014 daemon.info dnsmasq[1412]: reading /tmp/resolv.conf.auto
Mon Dec 29 22:24:05 2014 daemon.info dnsmasq[1412]: using local addresses only for domain lan
Mon Dec 29 22:24:05 2014 daemon.info dnsmasq[1412]: using nameserver 192.168.1.254#53
Mon Dec 29 22:24:05 2014 daemon.info dnsmasq[1412]: read /etc/hosts - 1 addresses
Mon Dec 29 22:24:05 2014 daemon.info dnsmasq[1412]: read /tmp/hosts/dhcp - 1 addresses
Mon Dec 29 22:24:05 2014 daemon.info dnsmasq-dhcp[1412]: read /etc/ethers - 0 addresses
Mon Dec 29 22:24:05 2014 authpriv.info dropbear[1427]: Child connection from 192.168.3.106:54175
Mon Dec 29 22:24:05 2014 kern.notice kernel: [   30.540000] scsi 3:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Mon Dec 29 22:24:05 2014 kern.notice kernel: [   30.570000] scsi 4:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
Mon Dec 29 22:24:05 2014 kern.notice kernel: [   30.580000] sd 4:0:0:0: [sda] Attached SCSI removable disk
Mon Dec 29 22:24:05 2014 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2)
Mon Dec 29 22:24:10 2014 authpriv.notice dropbear[1427]: Password auth succeeded for 'root' from 192.168.3.106:54175
Mon Dec 29 22:25:00 2014 kern.notice kernel: [   57.100000] sd 4:0:0:0: [sda] 61765632 512-byte logical blocks: (31.6 GB/29.4 GiB)
Mon Dec 29 22:25:00 2014 kern.notice kernel: [   57.110000] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mon Dec 29 22:25:00 2014 kern.info kernel: [   57.120000]  sda: sda1
Mon Dec 29 22:25:00 2014 user.err syslog: Unkown action change
Mon Dec 29 22:25:00 2014 user.err syslog: Unkown action change
Mon Dec 29 22:27:06 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:06 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:06 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:06 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:06 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:06 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:06 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:06 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:06 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:06 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:06 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:06 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:06 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:06 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:06 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:06 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:06 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:17 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:17 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:17 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:17 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:17 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:17 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:20 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:20 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:23 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:23 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:24 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:24 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:24 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:27:24 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:28:27 2014 authpriv.info dropbear[3466]: Child connection from 192.168.3.106:54305
Mon Dec 29 22:28:40 2014 authpriv.notice dropbear[3466]: Password auth succeeded for 'root' from 192.168.3.106:54305
Mon Dec 29 22:31:01 2014 daemon.notice netifd: Interface 'wan2' is setting up now
Mon Dec 29 22:31:02 2014 kern.err kernel: [  419.470000] option1 ttyUSB0: option_instat_callback: error -2
Mon Dec 29 22:31:03 2014 daemon.notice netifd: wan2 (13191): Trying to set mode
Mon Dec 29 22:31:04 2014 kern.err kernel: [  420.630000] option1 ttyUSB0: option_instat_callback: error -2
Mon Dec 29 22:31:04 2014 daemon.notice pppd[13396]: pppd 2.4.7 started by root, uid 0
Mon Dec 29 22:31:05 2014 local2.info chat[13469]: abort on (BUSY)
Mon Dec 29 22:31:05 2014 local2.info chat[13469]: abort on (NO CARRIER)
Mon Dec 29 22:31:05 2014 local2.info chat[13469]: abort on (ERROR)
Mon Dec 29 22:31:05 2014 local2.info chat[13469]: report (CONNECT)
Mon Dec 29 22:31:05 2014 local2.info chat[13469]: timeout set to 10 seconds
Mon Dec 29 22:31:05 2014 local2.info chat[13469]: send (AT&F^M)
Mon Dec 29 22:31:05 2014 local2.info chat[13469]: expect (OK)
Mon Dec 29 22:31:05 2014 local2.info chat[13469]: AT&F^M^M
Mon Dec 29 22:31:05 2014 local2.info chat[13469]: OK
Mon Dec 29 22:31:05 2014 local2.info chat[13469]:  -- got it
Mon Dec 29 22:31:05 2014 local2.info chat[13469]: send (ATE1^M)
Mon Dec 29 22:31:05 2014 local2.info chat[13469]: expect (OK)
Mon Dec 29 22:31:05 2014 local2.info chat[13469]: ^M
Mon Dec 29 22:31:05 2014 local2.info chat[13469]: ATE1^M^M
Mon Dec 29 22:31:05 2014 local2.info chat[13469]: OK
Mon Dec 29 22:31:05 2014 local2.info chat[13469]:  -- got it
Mon Dec 29 22:31:05 2014 local2.info chat[13469]: send (AT+CGDCONT=1,"IP","internet"^M)
Mon Dec 29 22:31:05 2014 local2.info chat[13469]: timeout set to 30 seconds
Mon Dec 29 22:31:05 2014 local2.info chat[13469]: expect (OK)
Mon Dec 29 22:31:05 2014 local2.info chat[13469]: ^M
Mon Dec 29 22:31:05 2014 local2.info chat[13469]: AT+CGDCONT=1,"IP","internet"^M^M
Mon Dec 29 22:31:05 2014 local2.info chat[13469]: OK
Mon Dec 29 22:31:05 2014 local2.info chat[13469]:  -- got it
Mon Dec 29 22:31:05 2014 local2.info chat[13469]: send (ATD*99***1#^M)
Mon Dec 29 22:31:06 2014 local2.info chat[13469]: expect (CONNECT)
Mon Dec 29 22:31:06 2014 local2.info chat[13469]: ^M
Mon Dec 29 22:31:06 2014 local2.info chat[13469]: ATD*99***1#^M^M
Mon Dec 29 22:31:06 2014 local2.info chat[13469]: CONNECT
Mon Dec 29 22:31:06 2014 local2.info chat[13469]:  -- got it
Mon Dec 29 22:31:06 2014 local2.info chat[13469]: send ( ^M)
Mon Dec 29 22:31:06 2014 daemon.info pppd[13396]: Serial connection established.
Mon Dec 29 22:31:06 2014 daemon.info pppd[13396]: Using interface 3g-wan2
Mon Dec 29 22:31:06 2014 daemon.notice pppd[13396]: Connect: 3g-wan2 <--> /dev/ttyUSB0
Mon Dec 29 22:31:07 2014 daemon.info pppd[13396]: CHAP authentication succeeded: Welcome!!
Mon Dec 29 22:31:07 2014 daemon.notice pppd[13396]: CHAP authentication succeeded
Mon Dec 29 22:31:07 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:31:07 2014 daemon.warn dnsmasq[1412]: possible DNS-rebind attack detected: netiaspot.home
Mon Dec 29 22:31:10 2014 daemon.warn pppd[13396]: Could not determine remote IP address: defaulting to 10.64.64.64
Mon Dec 29 22:31:10 2014 daemon.notice pppd[13396]: local  IP address 10.254.2.156
Mon Dec 29 22:31:10 2014 daemon.notice pppd[13396]: remote IP address 10.64.64.64
Mon Dec 29 22:31:10 2014 daemon.notice pppd[13396]: primary   DNS address 217.116.100.100
Mon Dec 29 22:31:10 2014 daemon.notice pppd[13396]: secondary DNS address 194.204.152.34
Mon Dec 29 22:31:11 2014 daemon.notice netifd: Network device '3g-wan2' link is up
Mon Dec 29 22:31:11 2014 daemon.notice netifd: Interface 'wan2' is now up
Mon Dec 29 22:31:11 2014 user.notice firewall: Reloading firewall due to ifup of wan2 (3g-wan2)
Mon Dec 29 22:31:17 2014 daemon.notice netifd: wan (1280): Received SIGTERM
Mon Dec 29 22:31:17 2014 daemon.notice netifd: Interface 'wan' is now down
Mon Dec 29 22:31:17 2014 daemon.info dnsmasq[1412]: reading /tmp/resolv.conf.auto
Mon Dec 29 22:31:17 2014 daemon.info dnsmasq[1412]: using local addresses only for domain lan
Mon Dec 29 22:31:17 2014 daemon.info dnsmasq[1412]: using nameserver 217.116.100.100#53
Mon Dec 29 22:31:17 2014 daemon.info dnsmasq[1412]: using nameserver 194.204.152.34#53
Mon Dec 29 22:31:17 2014 daemon.notice netifd: Interface 'wan6' is now down
Mon Dec 29 22:31:17 2014 daemon.notice netifd: Interface 'wan6' is disabled
Mon Dec 29 22:31:17 2014 daemon.notice netifd: Interface 'wan' is disabled
Mon Dec 29 22:31:17 2014 daemon.notice netifd: VLAN 'eth0.2' link is down
Mon Dec 29 22:31:17 2014 daemon.notice netifd: Interface 'wan' has link connectivity loss
Mon Dec 29 22:31:19 2014 daemon.info pppd[13396]: Terminating on signal 15
Mon Dec 29 22:31:19 2014 daemon.info pppd[13396]: Connect time 0.2 minutes.
Mon Dec 29 22:31:19 2014 daemon.info pppd[13396]: Sent 900 bytes, received 76 bytes.
Mon Dec 29 22:31:19 2014 daemon.notice netifd: Network device '3g-wan2' link is down
Mon Dec 29 22:31:19 2014 daemon.notice pppd[13396]: Connection terminated.
Mon Dec 29 22:31:19 2014 kern.err kernel: [  436.170000] option1 ttyUSB0: option_instat_callback: error -2
Mon Dec 29 22:31:19 2014 daemon.info pppd[13396]: Exit.
Mon Dec 29 22:31:19 2014 daemon.notice netifd: Interface 'wan2' is now down
Mon Dec 29 22:31:19 2014 daemon.notice netifd: Interface 'wan2' is setting up now
Mon Dec 29 22:31:21 2014 kern.err kernel: [  437.940000] option1 ttyUSB0: option_instat_callback: error -2
Mon Dec 29 22:31:21 2014 daemon.notice netifd: wan2 (14437): Trying to set mode
Mon Dec 29 22:31:22 2014 kern.err kernel: [  439.090000] option1 ttyUSB0: option_instat_callback: error -2
Mon Dec 29 22:31:22 2014 daemon.notice pppd[14633]: pppd 2.4.7 started by root, uid 0
Mon Dec 29 22:31:23 2014 local2.info chat[14700]: abort on (BUSY)
Mon Dec 29 22:31:23 2014 local2.info chat[14700]: abort on (NO CARRIER)
Mon Dec 29 22:31:23 2014 local2.info chat[14700]: abort on (ERROR)
Mon Dec 29 22:31:23 2014 local2.info chat[14700]: report (CONNECT)
Mon Dec 29 22:31:23 2014 local2.info chat[14700]: timeout set to 10 seconds
Mon Dec 29 22:31:23 2014 local2.info chat[14700]: send (AT&F^M)
Mon Dec 29 22:31:23 2014 local2.info chat[14700]: expect (OK)
Mon Dec 29 22:31:23 2014 local2.info chat[14700]: AT&F^M^M
Mon Dec 29 22:31:23 2014 local2.info chat[14700]: OK
Mon Dec 29 22:31:23 2014 local2.info chat[14700]:  -- got it
Mon Dec 29 22:31:23 2014 local2.info chat[14700]: send (ATE1^M)
Mon Dec 29 22:31:23 2014 local2.info chat[14700]: expect (OK)
Mon Dec 29 22:31:23 2014 local2.info chat[14700]: ^M
Mon Dec 29 22:31:23 2014 local2.info chat[14700]: ATE1^M^M
Mon Dec 29 22:31:23 2014 local2.info chat[14700]: OK
Mon Dec 29 22:31:23 2014 local2.info chat[14700]:  -- got it
Mon Dec 29 22:31:23 2014 local2.info chat[14700]: send (AT+CGDCONT=1,"IP","internet"^M)
Mon Dec 29 22:31:24 2014 local2.info chat[14700]: timeout set to 30 seconds
Mon Dec 29 22:31:24 2014 local2.info chat[14700]: expect (OK)
Mon Dec 29 22:31:24 2014 local2.info chat[14700]: ^M
Mon Dec 29 22:31:24 2014 local2.info chat[14700]: AT+CGDCONT=1,"IP","internet"^M^M
Mon Dec 29 22:31:24 2014 local2.info chat[14700]: OK
Mon Dec 29 22:31:24 2014 local2.info chat[14700]:  -- got it
Mon Dec 29 22:31:24 2014 local2.info chat[14700]: send (ATD*99***1#^M)
Mon Dec 29 22:31:24 2014 local2.info chat[14700]: expect (CONNECT)
Mon Dec 29 22:31:24 2014 local2.info chat[14700]: ^M
Mon Dec 29 22:31:24 2014 local2.info chat[14700]: ATD*99***1#^M^M
Mon Dec 29 22:31:24 2014 local2.info chat[14700]: CONNECT
Mon Dec 29 22:31:24 2014 local2.info chat[14700]:  -- got it
Mon Dec 29 22:31:24 2014 local2.info chat[14700]: send ( ^M)
Mon Dec 29 22:31:24 2014 daemon.info pppd[14633]: Serial connection established.
Mon Dec 29 22:31:24 2014 daemon.info pppd[14633]: Using interface 3g-wan2
Mon Dec 29 22:31:24 2014 daemon.notice pppd[14633]: Connect: 3g-wan2 <--> /dev/ttyUSB0
Mon Dec 29 22:31:25 2014 daemon.info pppd[14633]: CHAP authentication succeeded: Welcome!!
Mon Dec 29 22:31:25 2014 daemon.notice pppd[14633]: CHAP authentication succeeded
Mon Dec 29 22:31:28 2014 daemon.warn pppd[14633]: Could not determine remote IP address: defaulting to 10.64.64.64
Mon Dec 29 22:31:28 2014 daemon.notice pppd[14633]: local  IP address 10.237.159.58
Mon Dec 29 22:31:28 2014 daemon.notice pppd[14633]: remote IP address 10.64.64.64
Mon Dec 29 22:31:28 2014 daemon.notice pppd[14633]: primary   DNS address 217.116.104.104
Mon Dec 29 22:31:28 2014 daemon.notice pppd[14633]: secondary DNS address 194.204.152.34
Mon Dec 29 22:31:28 2014 daemon.warn dnsmasq[1412]: no servers found in /tmp/resolv.conf.auto, will retry
Mon Dec 29 22:31:28 2014 daemon.notice netifd: Network device '3g-wan2' link is up
Mon Dec 29 22:31:28 2014 daemon.notice netifd: Interface 'wan2' is now up
Mon Dec 29 22:31:28 2014 user.notice firewall: Reloading firewall due to ifup of wan2 (3g-wan2)
Mon Dec 29 22:31:29 2014 daemon.info dnsmasq[1412]: exiting on receipt of SIGTERM
Mon Dec 29 22:31:29 2014 daemon.info dnsmasq[15115]: started, version 2.71 cachesize 150
Mon Dec 29 22:31:29 2014 daemon.info dnsmasq[15115]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
Mon Dec 29 22:31:29 2014 daemon.info dnsmasq-dhcp[15115]: DHCP, IP range 192.168.3.100 -- 192.168.3.249, lease time 12h
Mon Dec 29 22:31:29 2014 daemon.info dnsmasq[15115]: using local addresses only for domain lan
Mon Dec 29 22:31:29 2014 daemon.info dnsmasq[15115]: reading /tmp/resolv.conf.auto
Mon Dec 29 22:31:29 2014 daemon.info dnsmasq[15115]: using local addresses only for domain lan
Mon Dec 29 22:31:29 2014 daemon.info dnsmasq[15115]: using nameserver 217.116.104.104#53
Mon Dec 29 22:31:29 2014 daemon.info dnsmasq[15115]: using nameserver 194.204.152.34#53
Mon Dec 29 22:31:29 2014 daemon.info dnsmasq[15115]: read /etc/hosts - 1 addresses
Mon Dec 29 22:31:29 2014 daemon.info dnsmasq[15115]: read /tmp/hosts/dhcp - 1 addresses
Mon Dec 29 22:31:29 2014 daemon.info dnsmasq-dhcp[15115]: read /etc/ethers - 0 addresses
Mon Dec 29 22:31:41 2014 daemon.notice netifd: Interface 'wan' is enabled
Mon Dec 29 22:31:41 2014 daemon.notice netifd: VLAN 'eth0.2' link is up
Mon Dec 29 22:31:41 2014 daemon.notice netifd: Interface 'wan' has link connectivity 
Mon Dec 29 22:31:41 2014 daemon.notice netifd: Interface 'wan' is setting up now
Mon Dec 29 22:31:41 2014 daemon.notice netifd: wan (15888): udhcpc (v1.22.1) started
Mon Dec 29 22:31:41 2014 daemon.notice netifd: wan (15888): Sending discover...
Mon Dec 29 22:31:43 2014 daemon.notice netifd: wan (15888): Sending select for 192.168.1.11...
Mon Dec 29 22:31:43 2014 daemon.notice netifd: wan (15888): Lease of 192.168.1.11 obtained, lease time 86400
Mon Dec 29 22:31:43 2014 daemon.notice netifd: Interface 'wan6' is enabled
Mon Dec 29 22:31:43 2014 daemon.notice netifd: Interface 'wan6' is setting up now
Mon Dec 29 22:31:43 2014 daemon.notice netifd: Interface 'wan' is now up
Mon Dec 29 22:31:44 2014 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2)
Mon Dec 29 22:31:45 2014 daemon.info dnsmasq[15115]: reading /tmp/resolv.conf.auto
Mon Dec 29 22:31:45 2014 daemon.info dnsmasq[15115]: using local addresses only for domain lan
Mon Dec 29 22:31:45 2014 daemon.info dnsmasq[15115]: using nameserver 192.168.1.254#53
Mon Dec 29 22:31:45 2014 daemon.info dnsmasq[15115]: using nameserver 217.116.104.104#53
Mon Dec 29 22:31:45 2014 daemon.info dnsmasq[15115]: using nameserver 194.204.152.34#53
Mon Dec 29 22:31:45 2014 daemon.info dnsmasq[15115]: exiting on receipt of SIGTERM
Mon Dec 29 22:31:45 2014 daemon.info dnsmasq[16138]: started, version 2.71 cachesize 150
Mon Dec 29 22:31:45 2014 daemon.info dnsmasq[16138]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
Mon Dec 29 22:31:45 2014 daemon.info dnsmasq-dhcp[16138]: DHCP, IP range 192.168.3.100 -- 192.168.3.249, lease time 12h
Mon Dec 29 22:31:45 2014 daemon.info dnsmasq[16138]: using local addresses only for domain lan
Mon Dec 29 22:31:45 2014 daemon.info dnsmasq[16138]: reading /tmp/resolv.conf.auto
Mon Dec 29 22:31:45 2014 daemon.info dnsmasq[16138]: using local addresses only for domain lan
Mon Dec 29 22:31:45 2014 daemon.info dnsmasq[16138]: using nameserver 192.168.1.254#53
Mon Dec 29 22:31:45 2014 daemon.info dnsmasq[16138]: using nameserver 217.116.104.104#53
Mon Dec 29 22:31:45 2014 daemon.info dnsmasq[16138]: using nameserver 194.204.152.34#53
Mon Dec 29 22:31:45 2014 daemon.info dnsmasq[16138]: read /etc/hosts - 1 addresses
Mon Dec 29 22:31:45 2014 daemon.info dnsmasq[16138]: read /tmp/hosts/dhcp - 1 addresses
Mon Dec 29 22:31:45 2014 daemon.info dnsmasq-dhcp[16138]: read /etc/ethers - 0 addresses

70 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,432

Odp: Zapasowe łącze na modemie GSM

Przecież wynik możesz do pliku skierować.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

71 Odpowiedź przez tenobcy (edytowany przez tenobcy 2014-12-29 23:47:21)

  • Zarejestrowany: 2013-08-15
  • Posty: 450

Odp: Zapasowe łącze na modemie GSM

W jaki sposób? Proszę za rączkę tongue

72 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,432

Odp: Zapasowe łącze na modemie GSM

sh -x /usr/bin/simplefailover > /tmp/plik.txt 2>&1

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

73 Odpowiedź przez tenobcy

  • Zarejestrowany: 2013-08-15
  • Posty: 450

Odp: Zapasowe łącze na modemie GSM

Ok przed wypięciem kabla:

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ ping -I eth0.2 -w 3 -c 3
+ awk /packets received/ {print $4}
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ ping -I eth0.2 -w 3 -c 3
+ awk /packets received/ {print $4}
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ ping -I eth0.2 -w 3 -c 3
+ awk /packets received/ {print $4}
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ ping -I eth0.2 -w 3 -c 3
+ awk /packets received/ {print $4}
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ ping -I eth0.2 -w 3 -c 3
+ awk /packets received/ {print $4}
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ ping -I eth0.2 -w 3 -c 3
+ awk /packets received/ {print $4}
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
root@OpenWrt:~#

i po wypięciu:

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ ping -I eth0.2 -w 3 -c 3
+ awk /packets received/ {print $4}
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ ping -I eth0.2 -w 3 -c 3
+ awk /packets received/ {print $4}
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ ping -I eth0.2 -w 3 -c 3
+ awk /packets received/ {print $4}
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ ping -I eth0.2 -w 3 -c 3
+ awk /packets received/ {print $4}
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ ping -I eth0.2 -w 3 -c 3
+ awk /packets received/ {print $4}
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ ping -I eth0.2 -w 3 -c 3
+ awk /packets received/ {print $4}
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ ping -I eth0.2 -w 3 -c 3
+ awk /packets received/ {print $4}
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ ping -I eth0.2 -w 3 -c 3
+ awk /packets received/ {print $4}
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ ping -I eth0.2 -w 3 -c 3
+ awk /packets received/ {print $4}
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ ping -I eth0.2 -w 3 -c 3
+ awk /packets received/ {print $4}
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

+ awk /packets received/ {print $4}
+ ping -I eth0.2 -w 3 -c 3
+ PR=
+ [ x = x0 ]
+ [ 1 = 2 ]
+ true
+ sleep
BusyBox v1.22.1 (2014-12-12 20:17:34 CET) multi-call binary.

Usage: sleep [N]...

Pause for a time equal to the total of the args given, where each arg can
have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays

route -n

root@OpenWrt:~# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.1.254   0.0.0.0         UG    0      0        0 eth0.2
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0.2
192.168.3.0     0.0.0.0         255.255.255.0   U     0      0        0 br-lan

74 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,432

Odp: Zapasowe łącze na modemie GSM

A w ogóle konfig masz? Bo nie odczytał czasu co jaki ma pingować.

uci show simplefailover pokaż.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

75 Odpowiedź przez tenobcy

  • Zarejestrowany: 2013-08-15
  • Posty: 450

Odp: Zapasowe łącze na modemie GSM

root@OpenWrt:~# uci show simplefailover
simplefailover.@simplefailover[0]=simplefailover
simplefailover.@simplefailover[0].wan_main=wan
simplefailover.@simplefailover[0].wan_backup=wan2
simplefailover.@simplefailover[0].host=8.8.4.4
simplefailover.@simplefailover[0].interval=5