26 Odpowiedź przez r_afaello (edytowany przez r_afaello 2014-10-19 13:59:30)

  • Zarejestrowany: 2013-03-05
  • Posty: 69

Odp: TL-3020 - zawiesza się

iwconfig wypluł:

br-wan    no wireless extensions.

gre0      no wireless extensions.

lo        no wireless extensions.

wlan0-1   IEEE 802.11bgn  ESSID:"TP-LINK_9A902C"
          Mode:Managed  Frequency:2.437 GHz  Access Point: E8:94:F6:9A:90:2C
          Bit Rate=21.7 Mb/s   Tx-Power=18 dBm
          RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=33/70  Signal level=-77 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:6  Invalid misc:4   Missed beacon:0

imq1      no wireless extensions.

wlan0     IEEE 802.11bgn  Mode:Master  Tx-Power=18 dBm
          RTS thr:off   Fragment thr:off
          Power Management:off

eth0      no wireless extensions.

imq0      no wireless extensions.

br-lan    no wireless extensions.

a tak wogle to nie mogę znaleźć na forum jak wyłączyć USB

27 Odpowiedź przez pepe2k

  • pepe2k
  • pepe2k
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-10-29
  • Posty: 5,028

Odp: TL-3020 - zawiesza się

Nie jest źle, ale u Ciebie problem może powodować też to, że masz konfigurację AP + AP klient (zgadza się?).

28 Odpowiedź przez r_afaello (edytowany przez r_afaello 2014-10-19 14:03:28)

  • Zarejestrowany: 2013-03-05
  • Posty: 69

Odp: TL-3020 - zawiesza się

Klient + ap
to źle?
W sumie ta z Ap moge zrezygnowac. Jak juz jestem fizycznie w kotłowni to mogę po kablu.

29 Odpowiedź przez r_afaello

  • Zarejestrowany: 2013-03-05
  • Posty: 69

Odp: TL-3020 - zawiesza się

Właśnie zdalnie jestem podłaczony i czytam co chwilę logi.
Znow brak odczytów
ostatni zrobił o 13:50
logi od tego czasu wyglądają tak:

Oct 19 13:43:59 GargoyleKOT authpriv.info dropbear[3707]: Exit (root): Exited normally
Oct 19 13:51:10 GargoyleKOT authpriv.info dropbear[6386]: Child connection from 83.24.241.29:13537
Oct 19 13:51:17 GargoyleKOT authpriv.notice dropbear[6386]: Password auth succeeded for 'root' from 83.24.241.29:13537
Oct 19 14:00:08 GargoyleKOT kern.err kernel: [ 4469.380000] ftdi_sio ttyUSB0: ftdi_set_termios FAILED to set databits/stopbits/parity
Oct 19 14:00:09 GargoyleKOT kern.err kernel: [ 4470.390000] ftdi_sio ttyUSB0: ftdi_set_termios urb failed to set baudrate
Oct 19 14:00:19 GargoyleKOT kern.err kernel: [ 4480.410000] ftdi_sio ttyUSB0: urb failed to clear flow control
Oct 19 14:00:25 GargoyleKOT kern.err kernel: [ 4486.430000] ftdi_sio ttyUSB0: ftdi_set_termios urb failed to set baudrate
Oct 19 14:00:30 GargoyleKOT kern.err kernel: [ 4491.440000] ftdi_sio ttyUSB0: urb failed to clear flow control
Oct 19 14:00:35 GargoyleKOT kern.err kernel: [ 4496.450000] ftdi_sio ttyUSB0: urb failed to clear flow control
Oct 19 14:00:40 GargoyleKOT kern.err kernel: [ 4501.460000] ftdi_sio ttyUSB0: ftdi_break_ctl FAILED to enable/disable break state (state was -1)
Oct 19 14:00:45 GargoyleKOT kern.err kernel: [ 4506.730000] ftdi_sio ttyUSB0: ftdi_break_ctl FAILED to enable/disable break state (state was 0)
Success

Wifi nie rozłączyło bo zdlanie jestem zalogowany i działa (chyba ze samo AP padło ale to musiałbym pójść sprawdzać)

30 Odpowiedź przez pepe2k

  • pepe2k
  • pepe2k
  • Użytkownik
  • Nieaktywny
  • Zarejestrowany: 2012-10-29
  • Posty: 5,028

Odp: TL-3020 - zawiesza się

Możesz spróbować ustawić go tylko w trybie klienta AP, ale jak potrzebuje tego tylko do wysyłania wyników na serwer raz na jakiś czas, to naprawdę może lepiej zrób sobie to połączenie "na żądanie".

O sterowaniu zasilaniem na USB w MR3020 masz tutaj: http://eko.one.pl/?p=openwrt-mr3020#usb

31 Odpowiedź przez r_afaello (edytowany przez r_afaello 2014-10-19 19:33:02)

  • Zarejestrowany: 2013-03-05
  • Posty: 69

Odp: TL-3020 - zawiesza się

chyba masz rację.
Ustawiłem tylko klienta. Zrobiłem reboot i dalej to samo.
No nic. Zabiorę go do domu i posprawdzam i pokombinuję z wyłaczaniem USB. Przy okazji zobaczę jak się zachowuje przy pełnym zasięgu wifi.

W domu pracuje ze 3 godziny i nic się nie dzieje.
Czyli wychodzi na to ze kwestia zasięgu moze być tu istotna. Chyba że może w kotłowni coś z pradem jest nie tak i tu jest pies pogrzebany.
Potestuję jeszcze.

32 Odpowiedź przez r_afaello

  • Zarejestrowany: 2013-03-05
  • Posty: 69

Odp: TL-3020 - zawiesza się

Testów ciąg dalszy. Rozwiązania brak.
Sprzęt ma większy ram i flash. Działa bez extroota.

W domu podpiąłem 2 czujniki pod moduł 1-wire.
Skrypt ustawiony zgodnie z sugestią (wyłącz wifi, włącz usb, odczytaj, wyłącz usb, wlacz wifi, wyśłij wynik) oddzielona sleep-ami.
Reboot ustawiony na raz dziennie w nocy.
Zostawiłem na tydzień czasu. Wszystko ok.

W tej samej konfiguracji zaniosłem do kotłowni. Dla pewności ze na rurach przy których standardowo montowane są czujniki nie ma jakiegoś przebicia testy robiłem tak jak w domu - czyli czujki luzem na podłodze.

Następnego dnia sprawdzam - brak odczytów , w nocy przestał wysyłać. Zdalny dostęp - niemożliwe.

Poszedłem do kotłowni. Podłaczyłem sie kabelkiem. Recznie wywołuję digtempa - brak odpowiedzi. Sprawdzam czy gpio/value jest  = 1 (czy skrypt się nie przerwał i nie został na wyłaczonym gpio). Jest jedynka.
Reboot i wszystko działa.
Pomyślałem że ustawie watchdoga żeby restartował router jak padnie net (zawszy po restarcie dostaje maila) - będę wiedział jak często jest problem z wifi.
Skrypt odczytu temperatur odpala się z crona co 10 minut.
monitor połaczenia ustawiłem co 7 minut.
No i cała noc telefon odbierał maile. Wychodziło że max co godzinę (czasami częściej)  był wykonywany reboot.
Sprawdziłem - ostatni odczyt temperatury przyszedł do mnie o 5 rano.
Zdalnie zalogowałem się.
Wykonuje digitempa reczie - brak reakcji, gpio = 1. internet działa.
Jakby wysypało się usb.

Logi nie są robione do pliku więc histori z przed restartu nie mam. ale zrobiłem zrzut teraz kiedy działa wifi a digitemp milczy.

logread

Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    0.480000] console [ttyATH0] enabled, bootconsole disabled
Jan  1 01:00:41 GargoyleKOT kern.warn kernel: [    0.490000] m25p80 spi0.0: found w25q128, expected m25p80
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    0.500000] m25p80 spi0.0: w25q128 (16384 Kbytes)
Jan  1 01:00:41 GargoyleKOT kern.notice kernel: [    0.500000] 5 tp-link partitions found on MTD device spi0.0
Jan  1 01:00:41 GargoyleKOT kern.notice kernel: [    0.510000] Creating 5 MTD partitions on "spi0.0":
Jan  1 01:00:41 GargoyleKOT kern.notice kernel: [    0.510000] 0x000000000000-0x000000020000 : "u-boot"
Jan  1 01:00:41 GargoyleKOT kern.notice kernel: [    0.520000] 0x000000020000-0x00000010ef8c : "kernel"
Jan  1 01:00:41 GargoyleKOT kern.warn kernel: [    0.520000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Jan  1 01:00:41 GargoyleKOT kern.notice kernel: [    0.540000] 0x00000010ef8c-0x000000ff0000 : "rootfs"
Jan  1 01:00:41 GargoyleKOT kern.warn kernel: [    0.540000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Jan  1 01:00:41 GargoyleKOT kern.notice kernel: [    0.550000] mtd: partition "rootfs" set to be root filesystem
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    0.560000] mtd: partition "rootfs_data" created automatically, ofs=680000, len=970000 
Jan  1 01:00:41 GargoyleKOT kern.notice kernel: [    0.570000] 0x000000680000-0x000000ff0000 : "rootfs_data"
Jan  1 01:00:41 GargoyleKOT kern.notice kernel: [    0.570000] 0x000000ff0000-0x000001000000 : "art"
Jan  1 01:00:41 GargoyleKOT kern.notice kernel: [    0.580000] 0x000000020000-0x000000ff0000 : "firmware"
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    0.600000] ag71xx_mdio: probed
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    0.610000] eth0: Atheros AG71xx at 0xb9000000, irq 4
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    1.160000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    1.170000] TCP cubic registered
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    1.170000] NET: Registered protocol family 17
Jan  1 01:00:41 GargoyleKOT kern.notice kernel: [    1.180000] Bridge firewalling registered
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    1.180000] Ebtables v2.0 registered
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    1.180000] 8021q: 802.1Q VLAN Support v1.8
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    1.200000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    1.200000] Freeing unused kernel memory: 220k freed
Jan  1 01:00:41 GargoyleKOT kern.debug kernel: [    3.630000] Registered led device: tp-link:green:3g
Jan  1 01:00:41 GargoyleKOT kern.debug kernel: [    3.630000] Registered led device: tp-link:green:wlan
Jan  1 01:00:41 GargoyleKOT kern.debug kernel: [    3.630000] Registered led device: tp-link:green:lan
Jan  1 01:00:41 GargoyleKOT kern.debug kernel: [    3.630000] Registered led device: tp-link:green:wps
Jan  1 01:00:41 GargoyleKOT kern.notice kernel: [    7.050000] JFFS2 notice: (446) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 76 of xref (0 dead, 48 orphan) found.
Jan  1 01:00:41 GargoyleKOT kern.notice kernel: [    7.920000] SCSI subsystem initialized
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    8.160000] usbcore: registered new interface driver usbfs
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    8.160000] usbcore: registered new interface driver hub
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    8.170000] usbcore: registered new device driver usb
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    8.710000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    8.710000] ehci-platform ehci-platform: Generic Platform EHCI Controller
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    8.720000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    8.760000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    8.780000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [    8.780000] hub 1-0:1.0: USB hub found
Jan  1 01:00:41 GargoyleKOT kern.info kernel: [   35.170000] NET: Registered protocol family 24
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   35.330000] nf_conntrack version 0.5.0 (963 buckets, 3852 max)
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   35.850000] PPTP driver version 0.8.5
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   36.810000] xt_time: kernel timezone is -0000
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   37.720000]     Hooked IMQ after mangle on PREROUTING
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   37.720000]     Hooked IMQ after nat on POSTROUTING
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   37.730000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   37.970000] Netfilter messages via NETLINK v0.30.
Jan  1 01:00:42 GargoyleKOT kern.notice kernel: [   38.230000] ip_set: protocol 6
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   39.000000] usbcore: registered new interface driver cdc_acm
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   39.000000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   39.170000] usbcore: registered new interface driver usblp
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   39.210000] usbcore: registered new interface driver usbserial
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   39.210000] USB Serial support registered for generic
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   39.220000] usbcore: registered new interface driver usbserial_generic
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   39.220000] usbserial: USB Serial Driver core
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   39.330000] USB Serial support registered for Sierra USB modem
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   39.340000] usbcore: registered new interface driver sierra
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   39.340000] sierra: v.1.7.40:USB Driver for Sierra Wireless USB modems
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   39.370000] usbcore: registered new interface driver sierra_net
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   39.640000] usbcore: registered new interface driver cdc_wdm
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   39.670000] usbcore: registered new interface driver cdc_ether
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   39.850000] usbcore: registered new interface driver cdc_ncm
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   39.940000] usbcore: registered new interface driver qmi_wwan
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   39.960000] usbcore: registered new interface driver rndis_host
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   40.020000] USB Serial support registered for FTDI USB Serial Device
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   40.020000] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   40.030000] usb 1-1: Detected FT232RL
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   40.030000] usb 1-1: Number of endpoints 2
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   40.040000] usb 1-1: Endpoint 1 MaxPacketSize 16384
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   40.040000] usb 1-1: Endpoint 2 MaxPacketSize 16384
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   40.050000] usb 1-1: Setting MaxPacketSize 64
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   40.050000] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   40.060000] usbcore: registered new interface driver ftdi_sio
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   40.070000] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   40.180000] USB Serial support registered for GSM modem (1-port)
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   40.180000] usbcore: registered new interface driver option
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   40.190000] option: v0.7.2:USB Driver for GSM modems
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   40.210000] USB Serial support registered for Qualcomm USB modem
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   40.220000] usbcore: registered new interface driver qcserial
Jan  1 01:00:42 GargoyleKOT kern.info kernel: [   40.390000] fuse init (API version 7.18)
Jan  1 01:00:48 GargoyleKOT kern.info kernel: [   48.410000] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan  1 01:00:48 GargoyleKOT kern.info kernel: [   48.420000] device eth0 entered promiscuous mode
Jan  1 01:00:48 GargoyleKOT kern.info kernel: [   48.420000] ADDRCONF(NETDEV_UP): br-lan: link is not ready
Jan  1 01:00:48 GargoyleKOT daemon.notice netifd: Interface 'lan' is now up
Jan  1 01:00:48 GargoyleKOT daemon.notice netifd: Interface 'loopback' is now up
Jan  1 01:00:48 GargoyleKOT user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Jan  1 01:00:49 GargoyleKOT user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.3.8_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform
Jan  1 01:00:52 GargoyleKOT user.info sysinit: command failed: Device or resource busy (-16)
Jan  1 01:00:52 GargoyleKOT kern.info kernel: [   52.130000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan  1 01:00:52 GargoyleKOT kern.info kernel: [   52.760000] ADDRCONF(NETDEV_UP): br-wan: link is not ready
Jan  1 01:00:52 GargoyleKOT daemon.notice netifd: Interface 'wan' is now up
Jan  1 01:00:54 GargoyleKOT kern.info kernel: [   54.290000] device wlan0 entered promiscuous mode
Jan  1 01:00:54 GargoyleKOT kern.info kernel: [   54.300000] wlan0: authenticate with e8:94:f6:9a:90:2c
Jan  1 01:00:54 GargoyleKOT kern.info kernel: [   54.310000] wlan0: send auth to e8:94:f6:9a:90:2c (try 1/3)
Jan  1 01:00:54 GargoyleKOT kern.info kernel: [   54.320000] wlan0: authenticated
Jan  1 01:00:54 GargoyleKOT kern.info kernel: [   54.330000] wlan0: associate with e8:94:f6:9a:90:2c (try 1/3)
Jan  1 01:00:54 GargoyleKOT kern.info kernel: [   54.340000] wlan0: RX AssocResp from e8:94:f6:9a:90:2c (capab=0x431 status=0 aid=1)
Jan  1 01:00:54 GargoyleKOT kern.info kernel: [   54.340000] wlan0: associated
Jan  1 01:00:54 GargoyleKOT kern.info kernel: [   54.350000] br-wan: port 1(wlan0) entered forwarding state
Jan  1 01:00:54 GargoyleKOT kern.info kernel: [   54.350000] br-wan: port 1(wlan0) entered forwarding state
Jan  1 01:00:54 GargoyleKOT kern.info kernel: [   54.360000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jan  1 01:00:54 GargoyleKOT kern.info kernel: [   54.370000] ADDRCONF(NETDEV_CHANGE): br-wan: link becomes ready
Nov  8 08:00:02 GargoyleKOT kern.info kernel: [   56.350000] br-wan: port 1(wlan0) entered forwarding state
Nov  8 08:00:02 GargoyleKOT user.notice usb-modeswitch: 1-1:1.0: Manufacturer=MERA-PROJEKT Product=USB_<->_1Wire_(MP00206) Serial=MPWZLJCH
Nov  8 08:00:02 GargoyleKOT authpriv.info dropbear[1246]: Running in background
Nov  8 08:00:03 GargoyleKOT daemon.crit httpd_gargoyle[1289]: bind 0.0.0.0 - Address already in use
Nov  8 08:00:03 GargoyleKOT daemon.crit httpd_gargoyle[1289]: bind 0.0.0.0 - Address already in use
Nov  8 08:00:03 GargoyleKOT daemon.warn httpd_gargoyle[1292]: started as root without requesting chroot(), warning only
Nov  8 08:00:03 GargoyleKOT daemon.notice httpd_gargoyle[1292]: httpd_gargoyle/1.0 14mar2008 starting on GargoyleKOT, port 80
Nov  8 08:00:06 GargoyleKOT user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Nov  8 08:00:06 GargoyleKOT user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Nov  8 08:00:06 GargoyleKOT user.notice dnsmasq: Allowing RFC1918 responses for domain free.aero2.net.pl
Nov  8 08:00:09 GargoyleKOT daemon.info dnsmasq[1652]: started, version 2.66 cachesize 150
Nov  8 08:00:09 GargoyleKOT daemon.info dnsmasq[1652]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth
Nov  8 08:00:09 GargoyleKOT daemon.info dnsmasq-dhcp[1652]: DHCP, IP range 192.168.2.101 -- 192.168.2.249, lease time 12h
Nov  8 08:00:09 GargoyleKOT daemon.info dnsmasq[1652]: using local addresses only for domain lan
Nov  8 08:00:09 GargoyleKOT daemon.info dnsmasq[1652]: reading /tmp/resolv.conf.auto
Nov  8 08:00:09 GargoyleKOT daemon.info dnsmasq[1652]: using nameserver 8.8.4.4#53
Nov  8 08:00:09 GargoyleKOT daemon.info dnsmasq[1652]: using nameserver 8.8.8.8#53
Nov  8 08:00:09 GargoyleKOT daemon.info dnsmasq[1652]: using nameserver 8.8.4.4#53
Nov  8 08:00:09 GargoyleKOT daemon.info dnsmasq[1652]: using nameserver 8.8.8.8#53
Nov  8 08:00:09 GargoyleKOT daemon.info dnsmasq[1652]: using local addresses only for domain lan
Nov  8 08:00:09 GargoyleKOT daemon.info dnsmasq[1652]: read /etc/hosts - 3 addresses
Nov  8 08:00:09 GargoyleKOT daemon.info dnsmasq-dhcp[1652]: read /etc/ethers - 0 addresses
Nov  8 08:00:10 GargoyleKOT user.err syslog: error starting threads: errno 89 (Function not implemented)
Nov  8 08:00:10 GargoyleKOT user.info sysinit: exportfs: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Nov  8 08:00:10 GargoyleKOT user.info sysinit: exportfs: can't lock /var/lib/nfs/etab for writing
Nov  8 08:00:10 GargoyleKOT user.info sysinit: exportfs: could not open /var/lib/nfs/.xtab.lock for locking: errno 2 (No such file or directory)
Nov  8 08:00:10 GargoyleKOT user.info sysinit: exportfs: can't lock /var/lib/nfs/xtab for writing
Nov  8 08:00:11 GargoyleKOT user.info sysinit: ERROR: No valid dynamic DNS service configurations defined
Nov  8 08:00:11 GargoyleKOT user.info sysinit: (Did you specify correct configuration file path?)
Nov  8 09:40:28 GargoyleKOT user.notice firewall: Reloading firewall due to ifup of wan (br-wan)
Nov  8 09:40:38 GargoyleKOT user.notice root: vsftpd init: mounted = 0
Nov  8 09:40:38 GargoyleKOT user.info sysinit: ERROR: No drives attached, no directories to share!
Nov  8 09:40:38 GargoyleKOT user.info sysinit: 2014-11-08 09:40:38
Nov  8 09:40:43 GargoyleKOT user.info sysinit: setting up led USB
Nov  8 09:40:43 GargoyleKOT user.info sysinit: setting up led WLAN
Nov  8 09:40:43 GargoyleKOT user.info sysinit: setting up led LAN
Nov  8 09:41:02 GargoyleKOT cron.err crond[1202]: time disparity of 101 minutes detected
Nov  8 09:41:21 GargoyleKOT kern.warn kernel: [  133.430000] ipt_bandwidth: timezone shift of 60 minutes detected, adjusting
Nov  8 09:41:21 GargoyleKOT kern.warn kernel: [  133.440000]                old minutes west=0, new minutes west=-60
Nov  8 09:42:02 GargoyleKOT authpriv.info dropbear[2614]: Child connection from 83.9.159.196:18425
Nov  8 09:42:10 GargoyleKOT authpriv.notice dropbear[2614]: Password auth succeeded for 'root' from 83.9.159.196:18425
Nov  8 09:43:33 GargoyleKOT kern.err kernel: [  265.470000] ftdi_sio ttyUSB0: ftdi_set_termios FAILED to set databits/stopbits/parity
Nov  8 09:43:34 GargoyleKOT kern.err kernel: [  266.480000] ftdi_sio ttyUSB0: ftdi_set_termios urb failed to set baudrate
Nov  8 09:43:44 GargoyleKOT kern.err kernel: [  276.500000] ftdi_sio ttyUSB0: urb failed to clear flow control
Nov  8 09:43:54 GargoyleKOT kern.err kernel: [  286.520000] ftdi_sio ttyUSB0: error from flowcontrol urb

Dmesg

[    0.000000] Linux version 3.3.8 (cezary@eko.one.pl) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #69 Sat Sep 27 10:15:45 CEST 2014
[    0.000000] MyLoader: sysp=66343a39, boardp=0b264768, parts=dba81876
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00004000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00004000
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 802fdf20, node_mem_map 81000000
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16256 pages, LIFO batch:3
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  board=TL-MR3020 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 61424k/65536k available (2256k kernel code, 4112k reserved, 425k data, 220k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79
[    0.100000] MIPS: machine is TP-LINK TL-MR3020
[    0.350000] bio: create slab <bio-0> at 0
[    0.360000] Switching to clocksource MIPS
[    0.370000] NET: Registered protocol family 2
[    0.370000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.370000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.380000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.380000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.390000] TCP reno registered
[    0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.400000] NET: Registered protocol family 1
[    0.410000] PCI: CLS 0 bytes, default 32
[    0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.430000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.440000] msgmni has been set to 119
[    0.440000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.450000] io scheduler noop registered
[    0.450000] io scheduler deadline registered (default)
[    0.460000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
[    0.480000] console [ttyATH0] enabled, bootconsole disabled
[    0.490000] m25p80 spi0.0: found w25q128, expected m25p80
[    0.500000] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    0.500000] 5 tp-link partitions found on MTD device spi0.0
[    0.510000] Creating 5 MTD partitions on "spi0.0":
[    0.510000] 0x000000000000-0x000000020000 : "u-boot"
[    0.520000] 0x000000020000-0x00000010ef8c : "kernel"
[    0.520000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.540000] 0x00000010ef8c-0x000000ff0000 : "rootfs"
[    0.540000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.550000] mtd: partition "rootfs" set to be root filesystem
[    0.560000] mtd: partition "rootfs_data" created automatically, ofs=680000, len=970000 
[    0.570000] 0x000000680000-0x000000ff0000 : "rootfs_data"
[    0.570000] 0x000000ff0000-0x000001000000 : "art"
[    0.580000] 0x000000020000-0x000000ff0000 : "firmware"
[    0.600000] ag71xx_mdio: probed
[    0.610000] eth0: Atheros AG71xx at 0xb9000000, irq 4
[    1.160000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[    1.170000] TCP cubic registered
[    1.170000] NET: Registered protocol family 17
[    1.180000] Bridge firewalling registered
[    1.180000] Ebtables v2.0 registered
[    1.180000] 8021q: 802.1Q VLAN Support v1.8
[    1.200000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    1.200000] Freeing unused kernel memory: 220k freed
[    3.630000] Registered led device: tp-link:green:3g
[    3.630000] Registered led device: tp-link:green:wlan
[    3.630000] Registered led device: tp-link:green:lan
[    3.630000] Registered led device: tp-link:green:wps
[    7.050000] JFFS2 notice: (446) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 76 of xref (0 dead, 48 orphan) found.
[    7.920000] SCSI subsystem initialized
[    8.160000] usbcore: registered new interface driver usbfs
[    8.160000] usbcore: registered new interface driver hub
[    8.170000] usbcore: registered new device driver usb
[    8.710000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    8.710000] ehci-platform ehci-platform: Generic Platform EHCI Controller
[    8.720000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    8.760000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    8.780000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    8.780000] hub 1-0:1.0: USB hub found
[    8.780000] hub 1-0:1.0: 1 port detected
[    8.860000] Initializing USB Mass Storage driver...
[    8.860000] usbcore: registered new interface driver usb-storage
[    8.870000] USB Mass Storage support registered.
[    9.020000] usbcore: registered new interface driver ums-alauda
[    9.030000] usbcore: registered new interface driver ums-cypress
[    9.050000] usbcore: registered new interface driver ums-datafab
[    9.060000] usbcore: registered new interface driver ums-freecom
[    9.080000] usbcore: registered new interface driver ums-isd200
[    9.090000] usbcore: registered new interface driver ums-jumpshot
[    9.100000] usbcore: registered new interface driver ums-karma
[    9.120000] usbcore: registered new interface driver ums-sddr09
[    9.130000] usbcore: registered new interface driver ums-sddr55
[    9.140000] usbcore: registered new interface driver ums-usbat
[    9.250000] usb 1-1: new full-speed USB device number 2 using ehci-platform
[   30.790000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[   30.790000] Backport generated by backports.git backports-20140320-37-g5c33da0
[   30.970000] cfg80211: Calling CRDA to update world regulatory domain
[   30.980000] cfg80211: World regulatory domain updated:
[   30.980000] cfg80211:  DFS Master region: unset
[   30.990000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   31.000000] cfg80211:   (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   31.000000] cfg80211:   (5140000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   31.300000] NET: Registered protocol family 10
[   32.690000] ath: EEPROM regdomain: 0x0
[   32.690000] ath: EEPROM indicates default country code should be used
[   32.690000] ath: doing EEPROM country->regdmn map search
[   32.690000] ath: country maps to regdmn code: 0x3a
[   32.690000] ath: Country alpha2 being used: US
[   32.690000] ath: Regpair used: 0x3a
[   32.700000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   32.700000] Registered led device: ath9k-phy0
[   32.700000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[   32.710000] cfg80211: Calling CRDA for country: US
[   32.720000] cfg80211: Regulatory domain changed to country: US
[   32.720000] cfg80211:  DFS Master region: unset
[   32.730000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   32.730000] cfg80211:   (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   32.740000] cfg80211:   (5140000 KHz - 5860000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   33.140000] RPC: Registered named UNIX socket transport module.
[   33.150000] RPC: Registered udp transport module.
[   33.150000] RPC: Registered tcp transport module.
[   33.160000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   33.740000] PPP generic driver version 2.4.2
[   33.900000] tun: Universal TUN/TAP device driver, 1.6
[   33.900000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   34.040000] GRE over IPv4 demultiplexor driver
[   34.060000] GRE over IPv4 tunneling driver
[   34.440000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   34.550000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   35.170000] NET: Registered protocol family 24
[   35.330000] nf_conntrack version 0.5.0 (963 buckets, 3852 max)
[   35.850000] PPTP driver version 0.8.5
[   36.810000] xt_time: kernel timezone is -0000
[   37.720000]     Hooked IMQ after mangle on PREROUTING
[   37.720000]     Hooked IMQ after nat on POSTROUTING
[   37.730000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
[   37.970000] Netfilter messages via NETLINK v0.30.
[   38.230000] ip_set: protocol 6
[   39.000000] usbcore: registered new interface driver cdc_acm
[   39.000000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   39.170000] usbcore: registered new interface driver usblp
[   39.210000] usbcore: registered new interface driver usbserial
[   39.210000] USB Serial support registered for generic
[   39.220000] usbcore: registered new interface driver usbserial_generic
[   39.220000] usbserial: USB Serial Driver core
[   39.330000] USB Serial support registered for Sierra USB modem
[   39.340000] usbcore: registered new interface driver sierra
[   39.340000] sierra: v.1.7.40:USB Driver for Sierra Wireless USB modems
[   39.370000] usbcore: registered new interface driver sierra_net
[   39.640000] usbcore: registered new interface driver cdc_wdm
[   39.670000] usbcore: registered new interface driver cdc_ether
[   39.850000] usbcore: registered new interface driver cdc_ncm
[   39.940000] usbcore: registered new interface driver qmi_wwan
[   39.960000] usbcore: registered new interface driver rndis_host
[   40.020000] USB Serial support registered for FTDI USB Serial Device
[   40.020000] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
[   40.030000] usb 1-1: Detected FT232RL
[   40.030000] usb 1-1: Number of endpoints 2
[   40.040000] usb 1-1: Endpoint 1 MaxPacketSize 16384
[   40.040000] usb 1-1: Endpoint 2 MaxPacketSize 16384
[   40.050000] usb 1-1: Setting MaxPacketSize 64
[   40.050000] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
[   40.060000] usbcore: registered new interface driver ftdi_sio
[   40.070000] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[   40.180000] USB Serial support registered for GSM modem (1-port)
[   40.180000] usbcore: registered new interface driver option
[   40.190000] option: v0.7.2:USB Driver for GSM modems
[   40.210000] USB Serial support registered for Qualcomm USB modem
[   40.220000] usbcore: registered new interface driver qcserial
[   40.390000] fuse init (API version 7.18)
[   48.410000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   48.420000] device eth0 entered promiscuous mode
[   48.420000] ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   52.130000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   52.760000] ADDRCONF(NETDEV_UP): br-wan: link is not ready
[   54.290000] device wlan0 entered promiscuous mode
[   54.300000] wlan0: authenticate with e8:94:f6:9a:90:2c
[   54.310000] wlan0: send auth to e8:94:f6:9a:90:2c (try 1/3)
[   54.320000] wlan0: authenticated
[   54.330000] wlan0: associate with e8:94:f6:9a:90:2c (try 1/3)
[   54.340000] wlan0: RX AssocResp from e8:94:f6:9a:90:2c (capab=0x431 status=0 aid=1)
[   54.340000] wlan0: associated
[   54.350000] br-wan: port 1(wlan0) entered forwarding state
[   54.350000] br-wan: port 1(wlan0) entered forwarding state
[   54.360000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   54.370000] ADDRCONF(NETDEV_CHANGE): br-wan: link becomes ready
[   56.350000] br-wan: port 1(wlan0) entered forwarding state
[  133.430000] ipt_bandwidth: timezone shift of 60 minutes detected, adjusting
[  133.440000]                old minutes west=0, new minutes west=-60
[  265.470000] ftdi_sio ttyUSB0: ftdi_set_termios FAILED to set databits/stopbits/parity
[  266.480000] ftdi_sio ttyUSB0: ftdi_set_termios urb failed to set baudrate
[  276.500000] ftdi_sio ttyUSB0: urb failed to clear flow control
[  286.520000] ftdi_sio ttyUSB0: error from flowcontrol urb

lsusb

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC

cat /proc/bus/usb/devices

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.03
S:  Manufacturer=Linux 3.3.8 ehci_hcd
S:  Product=Generic Platform EHCI Controller
S:  SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0403 ProdID=6001 Rev= 6.00
S:  Manufacturer=MERA-PROJEKT
S:  Product=USB <-> 1Wire (MP00206)
S:  SerialNumber=MPWZLJCH
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

Przyszło mi do głowy że moze watchdog wykonywany co 7 minut trafia na moment gdy wykonuje sie skrypt który to rozłącza net i w tedy restartuje mi sprzet.
dla testu ustawiłem na 13 minut, opóźnienie na starcie 240sek , 10 pingów sprawdzajacych.
Okaże sie czy restarty się zmniejszą wtedy myślę wyeliminuję jeden z problemów - czyli brak netu i zostanie problem z usb.

33 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,784

Odp: TL-3020 - zawiesza się

Zmień router na coś innego i zobacz czy tak się będzie zachowywać.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona