Z wgranego AA usuwam extroot.md5sum. Czy dobrze rozumiem że w BB już nie ma sumy kontrolnej?

Problem jak zwykle powtórzył się. Zrobiłem aktualizację BB na działającym extroot wykonując sysupgrade. Router uruchomił się ponownie lecz nie z extroota. Wykonałem http://eko.one.pl/?p=openwrt-externalro … ierbreaker , router uruchomił się ponownie ale nie z extroota. Czy jest coś jeszcze, co powinienem zrobić żeby zadziałał extroot? Gdzie jest zapisana suma kontrolna w BB? Nie mogę znaleźć informacji na ten temat.

sysupgrade /tmp/luci-ar71xx-generic-tl-wdr3600-v1-squashfs-sysupgrade.bin

po restarcie:

block detect > /etc/config/fstab
uci set fstab.@mount[0].target=/overlay
uci set fstab.@mount[0].enabled=1
uci commit fstab
reboot

fstab.@global[0]=global
fstab.@global[0].anon_swap=0
fstab.@global[0].anon_mount=0
fstab.@global[0].auto_swap=1
fstab.@global[0].auto_mount=1
fstab.@global[0].delay_root=5
fstab.@global[0].check_fs=0
fstab.@mount[0]=mount
fstab.@mount[0].uuid=4070cd39-5e3e-43aa-b4c5-c522128eba05
fstab.@mount[0].target=/overlay
fstab.@mount[0].fstype=ext4
fstab.@mount[0].enabled=1

/dev/mtdblock2: UUID="501b2a85-c09f3497-eed9315d-72e59cae" VERSION="4.0" TYPE="squashfs"
/dev/mtdblock3: TYPE="jffs2"
/dev/sda1: UUID="4070cd39-5e3e-43aa-b4c5-c522128eba05" NAME="EXT_JOURNAL" VERSION="1.0" TYPE="ext4"

Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.150000] nf_conntrack version 0.5.0 (1974 buckets, 7896 max)
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.170000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.200000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.210000] Backport generated by backports.git backports-20140320-37-g5c33da0
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.250000] cfg80211: Calling CRDA to update world regulatory domain
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.250000] cfg80211: World regulatory domain updated:
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.260000] cfg80211:  DFS Master region: unset
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.260000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.270000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.280000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.290000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.300000] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.310000] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.310000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.320000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.330000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.420000] u32 classifier
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.420000]     input device check on
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.430000]     Actions configured
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.440000] Mirror/redirect action on
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.460000] fuse init (API version 7.22)
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.500000] usbcore: registered new interface driver cdc_acm
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.500000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.520000] ip_tables: (C) 2000-2006 Netfilter Core Team
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.580000] usbcore: registered new interface driver usblp
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.610000] usbcore: registered new interface driver usbserial
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.610000] usbcore: registered new interface driver usbserial_generic
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.620000] usbserial: USB Serial support registered for generic
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.690000] xt_time: kernel timezone is -0000
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.710000] usbcore: registered new interface driver cdc_ether
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.730000] usbcore: registered new interface driver cdc_ncm
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.760000] PPP generic driver version 2.4.2
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.770000] PPP MPPE Compression module registered
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.770000] NET: Registered protocol family 24
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.780000] PPTP driver version 0.8.5
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.810000] usbcore: registered new interface driver sierra
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.810000] usbserial: USB Serial support registered for Sierra USB modem
Mon Sep 15 22:50:18 2014 kern.debug kernel: [   13.850000] ath: EEPROM regdomain: 0x0
Mon Sep 15 22:50:18 2014 kern.debug kernel: [   13.850000] ath: EEPROM indicates default country code should be used
Mon Sep 15 22:50:18 2014 kern.debug kernel: [   13.850000] ath: doing EEPROM country->regdmn map search
Mon Sep 15 22:50:18 2014 kern.debug kernel: [   13.850000] ath: country maps to regdmn code: 0x3a
Mon Sep 15 22:50:18 2014 kern.debug kernel: [   13.850000] ath: Country alpha2 being used: US
Mon Sep 15 22:50:18 2014 kern.debug kernel: [   13.850000] ath: Regpair used: 0x3a
Mon Sep 15 22:50:18 2014 kern.debug kernel: [   13.870000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.870000] cfg80211: Calling CRDA for country: US
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.880000] cfg80211: Regulatory domain changed to country: US
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.880000] cfg80211:  DFS Master region: FCC
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.890000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.900000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.900000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.910000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.920000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.930000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.940000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
Mon Sep 15 22:50:18 2014 kern.warn kernel: [   13.940000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Mon Sep 15 22:50:18 2014 kern.debug kernel: [   13.960000] ath: EEPROM regdomain: 0x0
Mon Sep 15 22:50:18 2014 kern.debug kernel: [   13.960000] ath: EEPROM indicates default country code should be used
Mon Sep 15 22:50:18 2014 kern.debug kernel: [   13.960000] ath: doing EEPROM country->regdmn map search
Mon Sep 15 22:50:18 2014 kern.debug kernel: [   13.960000] ath: country maps to regdmn code: 0x3a
Mon Sep 15 22:50:18 2014 kern.debug kernel: [   13.960000] ath: Country alpha2 being used: US
Mon Sep 15 22:50:18 2014 kern.debug kernel: [   13.960000] ath: Regpair used: 0x3a
Mon Sep 15 22:50:18 2014 kern.debug kernel: [   13.980000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Mon Sep 15 22:50:18 2014 kern.info kernel: [   13.980000] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
Mon Sep 15 22:50:18 2014 kern.info kernel: [   14.000000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
Mon Sep 15 22:50:18 2014 kern.info kernel: [   14.020000] usbcore: registered new interface driver option
Mon Sep 15 22:50:18 2014 kern.info kernel: [   14.020000] usbserial: USB Serial support registered for GSM modem (1-port)
Mon Sep 15 22:50:21 2014 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Mon Sep 15 22:50:22 2014 user.err syslog: /dev/mtdblock3 is already mounted
Mon Sep 15 22:50:22 2014 user.emerg syslog: block: /dev/mtdblock3 is already mounted
Mon Sep 15 22:50:23 2014 authpriv.info dropbear[1315]: Not backgrounding
Mon Sep 15 22:50:26 2014 kern.info kernel: [   23.740000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Mon Sep 15 22:50:26 2014 kern.info kernel: [   23.750000] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
Mon Sep 15 22:50:26 2014 kern.info kernel: [   23.760000] device eth0.1 entered promiscuous mode
Mon Sep 15 22:50:26 2014 kern.info kernel: [   23.760000] device eth0 entered promiscuous mode
Mon Sep 15 22:50:26 2014 daemon.notice netifd: Interface 'lan' is enabled
Mon Sep 15 22:50:26 2014 daemon.notice netifd: Interface 'lan' is setting up now
Mon Sep 15 22:50:26 2014 daemon.notice netifd: Interface 'lan' is now up
Mon Sep 15 22:50:26 2014 kern.info kernel: [   23.790000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Mon Sep 15 22:50:26 2014 daemon.notice netifd: Interface 'bt' is setting up now
Mon Sep 15 22:50:26 2014 daemon.notice netifd: Interface 'loopback' is enabled
Mon Sep 15 22:50:26 2014 daemon.notice netifd: Interface 'loopback' is setting up now
Mon Sep 15 22:50:26 2014 daemon.notice netifd: Interface 'loopback' is now up
Mon Sep 15 22:50:26 2014 kern.info kernel: [   23.830000] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
Mon Sep 15 22:50:26 2014 daemon.notice netifd: Interface 'wan' is enabled
Mon Sep 15 22:50:26 2014 daemon.notice netifd: Network device 'lo' link is up
Mon Sep 15 22:50:26 2014 daemon.notice netifd: Interface 'loopback' has link connectivity
Mon Sep 15 22:50:26 2014 daemon.notice netifd: Interface 'bt' is now down
Mon Sep 15 22:50:26 2014 kern.info kernel: [   24.680000] eth0: link up (1000Mbps/Full duplex)
Mon Sep 15 22:50:27 2014 daemon.notice netifd: Network device 'eth0' link is up
Mon Sep 15 22:50:27 2014 daemon.notice netifd: VLAN 'eth0.2' link is up
Mon Sep 15 22:50:27 2014 daemon.notice netifd: Interface 'wan' has link connectivity
Mon Sep 15 22:50:27 2014 daemon.notice netifd: Interface 'wan' is setting up now
Mon Sep 15 22:50:27 2014 daemon.notice netifd: VLAN 'eth0.1' link is up
Mon Sep 15 22:50:27 2014 kern.info kernel: [   24.740000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Mon Sep 15 22:50:27 2014 kern.info kernel: [   24.740000] br-lan: port 1(eth0.1) entered forwarding state
Mon Sep 15 22:50:27 2014 kern.info kernel: [   24.750000] br-lan: port 1(eth0.1) entered forwarding state
Mon Sep 15 22:50:27 2014 kern.info kernel: [   24.760000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
Mon Sep 15 22:50:27 2014 kern.info kernel: [   24.760000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
Mon Sep 15 22:50:27 2014 kern.info kernel: [   24.830000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Mon Sep 15 22:50:27 2014 daemon.notice netifd: Bridge 'br-lan' link is up
Mon Sep 15 22:50:27 2014 daemon.notice netifd: Interface 'lan' has link connectivity
Mon Sep 15 22:50:27 2014 kern.info kernel: [   25.120000] cfg80211: Calling CRDA for country: PL
Mon Sep 15 22:50:27 2014 kern.info kernel: [   25.150000] cfg80211: Regulatory domain changed to country: PL
Mon Sep 15 22:50:27 2014 kern.info kernel: [   25.160000] cfg80211:  DFS Master region: ETSI
Mon Sep 15 22:50:27 2014 kern.info kernel: [   25.160000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Mon Sep 15 22:50:27 2014 kern.info kernel: [   25.170000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Mon Sep 15 22:50:27 2014 kern.info kernel: [   25.180000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Mon Sep 15 22:50:27 2014 kern.info kernel: [   25.190000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
Mon Sep 15 22:50:27 2014 kern.info kernel: [   25.190000] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s)
Mon Sep 15 22:50:27 2014 kern.info kernel: [   25.200000] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Mon Sep 15 22:50:27 2014 daemon.notice netifd: wan (1633): udhcpc (v1.22.1) started
Mon Sep 15 22:50:28 2014 daemon.notice netifd: wan (1633): Sending discover...
Mon Sep 15 22:50:28 2014 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Mon Sep 15 22:50:28 2014 daemon.notice netifd: wan (1633): Sending select for 95.160.17.239...
Mon Sep 15 22:50:28 2014 daemon.notice netifd: wan (1633): Lease of 95.160.17.239 obtained, lease time 7200
Mon Sep 15 22:50:28 2014 user.emerg syslog: Another app is currently holding the xtables lock. Perhaps you want to use the -w option?
Mon Sep 15 22:50:28 2014 user.emerg syslog: Another app is currently holding the xtables lock. Perhaps you want to use the -w option?
Mon Sep 15 22:50:28 2014 user.emerg syslog: Another app is currently holding the xtables lock. Perhaps you want to use the -w option?
Mon Sep 15 22:50:28 2014 user.emerg syslog: Another app is currently holding the xtables lock. Perhaps you want to use the -w option?
Mon Sep 15 22:50:28 2014 daemon.notice netifd: Interface 'wan' is now up
Mon Sep 15 22:50:29 2014 kern.info kernel: [   26.750000] br-lan: port 1(eth0.1) entered forwarding state
Mon Sep 15 22:50:29 2014 kern.info kernel: [   27.400000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Mon Sep 15 22:50:29 2014 kern.info kernel: [   27.410000] device wlan0 entered promiscuous mode
Mon Sep 15 22:50:32 2014 daemon.crit xl2tpd[1861]: setsockopt recvref[30]: Protocol not available
Mon Sep 15 22:50:32 2014 daemon.info xl2tpd[1861]: Using l2tp kernel support.
Mon Sep 15 22:50:32 2014 daemon.info xl2tpd[1862]: xl2tpd version xl2tpd-1.3.6 started on OpenWrt PID:1862
Mon Sep 15 22:50:32 2014 daemon.info xl2tpd[1862]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc.
Mon Sep 15 22:50:32 2014 daemon.info xl2tpd[1862]: Forked by Scott Balmos and David Stipp, (C) 2001
Mon Sep 15 22:50:32 2014 daemon.info xl2tpd[1862]: Inherited by Jeff McAdams, (C) 2002
Mon Sep 15 22:50:32 2014 daemon.info xl2tpd[1862]: Forked again by Xelerance (www.xelerance.com) (C) 2006
Mon Sep 15 22:50:32 2014 daemon.info xl2tpd[1862]: Listening on IP address 0.0.0.0, port 1701
Mon Sep 15 22:50:33 2014 user.emerg syslog: setting up led USB1
Mon Sep 15 22:50:33 2014 user.info watchcat: starting all tasks
Mon Sep 15 22:50:33 2014 user.info wathchat: started task (mode=ping;period=21600;pinghosts=8.8.8.8;pingperiod=1080;forcedelay=30)
Mon Sep 15 22:50:33 2014 user.info watchcat: all tasks started
Mon Sep 15 22:50:34 2014 user.emerg syslog: - init complete -
Mon Sep 15 22:50:34 2014 daemon.info dnsmasq[2097]: started, version 2.71 cachesize 150
Mon Sep 15 22:50:34 2014 daemon.info dnsmasq[2097]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
Mon Sep 15 22:50:34 2014 daemon.info dnsmasq-dhcp[2097]: DHCP, IP range 192.168.1.180 -- 192.168.1.209, lease time 12h
Mon Sep 15 22:50:34 2014 daemon.info dnsmasq[2097]: using local addresses only for domain lan
Mon Sep 15 22:50:34 2014 daemon.info dnsmasq[2097]: reading /tmp/resolv.conf.auto
Mon Sep 15 22:50:34 2014 daemon.info dnsmasq[2097]: using local addresses only for domain lan
Mon Sep 15 22:50:34 2014 daemon.info dnsmasq[2097]: using nameserver 88.156.222.92#53
Mon Sep 15 22:50:34 2014 daemon.info dnsmasq[2097]: using nameserver 109.241.239.12#53
Mon Sep 15 22:50:34 2014 daemon.info dnsmasq[2097]: using nameserver 95.160.170.92#53
Mon Sep 15 22:50:34 2014 daemon.info dnsmasq[2097]: read /etc/hosts - 1 addresses
Mon Sep 15 22:50:34 2014 daemon.info dnsmasq[2097]: read /tmp/hosts/dhcp - 1 addresses
Mon Sep 15 22:50:34 2014 daemon.info dnsmasq-dhcp[2097]: read /etc/ethers - 0 addresses
Mon Sep 15 22:50:35 2014 daemon.err miniupnpd[2288]: could not open lease file: /var/upnp.leases
Mon Sep 15 22:50:35 2014 daemon.notice miniupnpd[2288]: HTTP listening on port 5000
Mon Sep 15 22:50:35 2014 daemon.warn miniupnpd[2288]: no HTTP IPv6 address, disabling IPv6
Mon Sep 15 22:50:35 2014 daemon.notice miniupnpd[2288]: Listening for NAT-PMP/PCP traffic on port 5351
Mon Sep 15 22:50:37 2014 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2)
Mon Sep 15 22:50:38 2014 daemon.info dnsmasq-dhcp[2097]: DHCPREQUEST(br-lan) 192.168.1.200 74:d4:35:87:28:c4
Mon Sep 15 22:50:38 2014 daemon.info dnsmasq-dhcp[2097]: DHCPACK(br-lan) 192.168.1.200 74:d4:35:87:28:c4 pecet
Mon Sep 15 22:50:39 2014 kern.info kernel: [   36.770000] br-lan: port 2(wlan0) entered forwarding state
Mon Sep 15 22:50:39 2014 kern.info kernel: [   36.770000] br-lan: port 2(wlan0) entered forwarding state
Mon Sep 15 22:50:39 2014 kern.info kernel: [   36.780000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mon Sep 15 22:50:39 2014 daemon.notice netifd: Network device 'wlan0' link is up
Mon Sep 15 22:50:39 2014 daemon.notice miniupnpd[2288]: shutting down MiniUPnPd
Mon Sep 15 22:50:39 2014 daemon.err miniupnpd[2288]: sendto(udp_shutdown=-1): Bad file descriptor
Mon Sep 15 22:50:39 2014 daemon.err miniupnpd[2288]: sendto(udp_shutdown=-1): Bad file descriptor
Mon Sep 15 22:50:39 2014 daemon.err miniupnpd[2288]: sendto(udp_shutdown=-1): Bad file descriptor
Mon Sep 15 22:50:39 2014 daemon.err miniupnpd[2288]: sendto(udp_shutdown=-1): Bad file descriptor
Mon Sep 15 22:50:39 2014 daemon.err miniupnpd[2288]: sendto(udp_shutdown=-1): Bad file descriptor
Mon Sep 15 22:50:39 2014 daemon.err miniupnpd[2288]: sendto(udp_shutdown=-1): Bad file descriptor
Mon Sep 15 22:50:39 2014 daemon.err miniupnpd[2288]: sendto(udp_shutdown=-1): Bad file descriptor
Mon Sep 15 22:50:39 2014 daemon.err miniupnpd[2288]: sendto(udp_shutdown=-1): Bad file descriptor
Mon Sep 15 22:50:39 2014 daemon.err miniupnpd[2288]: sendto(udp_shutdown=-1): Bad file descriptor
Mon Sep 15 22:50:39 2014 daemon.err miniupnpd[2288]: sendto(udp_shutdown=-1): Bad file descriptor
Mon Sep 15 22:50:39 2014 daemon.err miniupnpd[2288]: sendto(udp_shutdown=-1): Bad file descriptor
Mon Sep 15 22:50:39 2014 daemon.err miniupnpd[2288]: Failed to broadcast good-bye notifications
Mon Sep 15 22:50:41 2014 kern.info kernel: [   38.770000] br-lan: port 2(wlan0) entered forwarding state
Mon Sep 15 22:50:41 2014 daemon.err miniupnpd[2700]: could not open lease file: /var/upnp.leases
Mon Sep 15 22:50:41 2014 daemon.notice miniupnpd[2700]: HTTP listening on port 5000
Mon Sep 15 22:50:41 2014 daemon.warn miniupnpd[2700]: no HTTP IPv6 address, disabling IPv6
Mon Sep 15 22:50:41 2014 daemon.notice miniupnpd[2700]: Listening for NAT-PMP/PCP traffic on port 5351

Mon Sep 15 22:50:18 2014 kern.err kernel: [    8.170000] sd 0:0:0:0: [sda] Assuming drive cache: write through
Mon Sep 15 22:50:18 2014 kern.notice kernel: [    8.180000] sd 0:0:0:0: [sda] Attached SCSI removable disk
Mon Sep 15 22:50:18 2014 kern.notice kernel: [    9.730000] jffs2: notice: (412) jffs2_build_xattr_subsystem: complete building xattr subsystem, 29 of xdatum (1 unchecked, 28 orphan) and 62 of xref (0 dead, 36 orphan) found.
Mon Sep 15 22:50:18 2014 kern.info kernel: [    9.770000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
Mon Sep 15 22:50:18 2014 kern.notice kernel: [    9.830000] jffs2: notice: (409) jffs2_build_xattr_subsystem: complete building xattr subsystem, 29 of xdatum (1 unchecked, 28 orphan) and 62 of xref (0 dead, 36 orphan) found.

rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,noatime)
sysfs on /sys type sysfs (rw,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/mtdblock3 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlayfs (rw,noatime,lowerdir=/,upperdir=/overlay)
tmpfs on /dev type tmpfs (rw,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)

Wrzucam dmesg

0.000000] Linux version 3.10.49 (cezary@eko.one.pl) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #9 Sat Sep 13 20:51:38 CEST 2014
[    0.000000] MyLoader: sysp=b3a3d853, boardp=492118fc, parts=f35d1cdf
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001974c (MIPS 74Kc)
[    0.000000] SoC: Atheros AR9344 rev 2
[    0.000000] Clocks: CPU:560.000MHz, DDR:450.000MHz, AHB:225.000MHz, Ref:40.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x07ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat 80330b60, node_mem_map 81000000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line:  board=TL-WDR4300 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 126116k/131072k available (2352k kernel code, 4956k reserved, 621k data, 224k init, 0k highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.060000] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
[    0.070000] pid_max: default: 32768 minimum: 301
[    0.070000] Mount-cache hash table entries: 512
[    0.080000] NET: Registered protocol family 16
[    0.080000] MIPS: machine is TP-LINK TL-WDR3600/4300/4310
[    0.090000] registering PCI controller with io_map_base unset
[    0.310000] bio: create slab <bio-0> at 0
[    0.310000] PCI host bridge to bus 0000:00
[    0.320000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[    0.320000] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.330000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.330000] pci 0000:00:00.0: [168c:0033] type 00 class 0x028000
[    0.330000] pci 0000:00:00.0: invalid calibration data
[    0.340000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x0001ffff 64bit]
[    0.340000] pci 0000:00:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.340000] pci 0000:00:00.0: supports D1
[    0.340000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.340000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.340000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
[    0.340000] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
[    0.350000] pci 0000:00:00.0: using irq 40 for pin 1
[    0.350000] Switching to clocksource MIPS
[    0.360000] NET: Registered protocol family 2
[    0.360000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.360000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.370000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.370000] TCP: reno registered
[    0.370000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.380000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.390000] NET: Registered protocol family 1
[    0.390000] PCI: CLS 0 bytes, default 32
[    0.410000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.410000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.420000] msgmni has been set to 246
[    0.430000] io scheduler noop registered
[    0.430000] io scheduler deadline registered (default)
[    0.430000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.470000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[    0.470000] console [ttyS0] enabled, bootconsole disabled
[    0.490000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[    0.490000] m25p80 spi0.0: found s25fl064k, expected m25p80
[    0.500000] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[    0.510000] 5 tp-link partitions found on MTD device spi0.0
[    0.510000] Creating 5 MTD partitions on "spi0.0":
[    0.520000] 0x000000000000-0x000000020000 : "u-boot"
[    0.520000] 0x000000020000-0x00000012d2fc : "kernel"
[    0.530000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.540000] 0x00000012d2fc-0x0000007f0000 : "rootfs"
[    0.550000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.560000] mtd: device 2 (rootfs) set to be root filesystem
[    0.570000] 1 squashfs-split partitions found on MTD device rootfs
[    0.570000] 0x000000670000-0x0000007f0000 : "rootfs_data"
[    0.580000] 0x0000007f0000-0x000000800000 : "art"
[    0.590000] 0x000000020000-0x0000007f0000 : "firmware"
[    0.620000] switch0: Atheros AR8327 rev. 2 switch registered on ag71xx-mdio.0
[    1.840000] libphy: ag71xx_mdio: probed
[    2.390000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd033, driver=Atheros AR8216/AR8236/AR8316]
[    2.400000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[    2.410000] TCP: cubic registered
[    2.410000] NET: Registered protocol family 17
[    2.420000] Bridge firewalling registered
[    2.420000] 8021q: 802.1Q VLAN Support v1.8
[    2.430000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    2.440000] Freeing unused kernel memory: 224K (80348000 - 80380000)
[    5.240000] usbcore: registered new interface driver usbfs
[    5.250000] usbcore: registered new interface driver hub
[    5.250000] usbcore: registered new device driver usb
[    5.290000] SCSI subsystem initialized
[    5.300000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.310000] ehci-platform: EHCI generic platform driver
[    5.320000] ehci-platform ehci-platform: EHCI Host Controller
[    5.320000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    5.330000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    5.360000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    5.360000] hub 1-0:1.0: USB hub found
[    5.370000] hub 1-0:1.0: 1 port detected
[    5.370000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.380000] usbcore: registered new interface driver usb-storage
[    5.710000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    6.170000] hub 1-1:1.0: USB hub found
[    6.170000] hub 1-1:1.0: 4 ports detected
[    6.470000] usb 1-1.2: new high-speed USB device number 3 using ehci-platform
[    6.610000] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[    6.610000] scsi0 : usb-storage 1-1.2:1.0
[    7.410000] eth0: link up (1000Mbps/Full duplex)
[    7.620000] scsi 0:0:0:0: Direct-Access     Kingston DataTraveler II+ 1.13 PQ: 0 ANSI: 0 CCS
[    7.790000] sd 0:0:0:0: [sda] 461824 512-byte logical blocks: (236 MB/225 MiB)
[    7.800000] sd 0:0:0:0: [sda] Write Protect is off
[    7.800000] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[    7.800000] sd 0:0:0:0: [sda] No Caching mode page found
[    7.810000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    7.820000] sd 0:0:0:0: [sda] No Caching mode page found
[    7.820000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    7.830000]  sda: sda1
[    7.840000] sd 0:0:0:0: [sda] No Caching mode page found
[    7.840000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    7.850000] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    9.720000] jffs2: notice: (410) jffs2_build_xattr_subsystem: complete building xattr subsystem, 29 of xdatum (1 unchecked, 28 orphan) and 62 of xref (0 dead, 36 orphan) found.
[    9.750000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
[    9.820000] jffs2: notice: (407) jffs2_build_xattr_subsystem: complete building xattr subsystem, 29 of xdatum (1 unchecked, 28 orphan) and 62 of xref (0 dead, 36 orphan) found.
[    9.860000] eth0: link down
[   13.210000] NET: Registered protocol family 10
[   13.240000] l2tp_core: L2TP core driver, V2.0
[   13.240000] l2tp_netlink: L2TP netlink interface
[   13.260000] gre: GRE over IPv4 demultiplexor driver
[   13.280000] ip_gre: GRE over IPv4 tunneling driver
[   13.300000] nf_conntrack version 0.5.0 (1974 buckets, 7896 max)
[   13.330000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   13.360000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[   13.370000] Backport generated by backports.git backports-20140320-37-g5c33da0
[   13.420000] cfg80211: Calling CRDA to update world regulatory domain
[   13.420000] cfg80211: World regulatory domain updated:
[   13.430000] cfg80211:  DFS Master region: unset
[   13.430000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   13.440000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   13.450000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   13.460000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   13.470000] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[   13.480000] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   13.480000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   13.490000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   13.500000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   13.580000] u32 classifier
[   13.580000]     input device check on
[   13.590000]     Actions configured
[   13.600000] Mirror/redirect action on
[   13.620000] fuse init (API version 7.22)
[   13.660000] usbcore: registered new interface driver cdc_acm
[   13.660000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   13.690000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   13.720000] usbcore: registered new interface driver usblp
[   13.760000] usbcore: registered new interface driver usbserial
[   13.780000] usbcore: registered new interface driver usbserial_generic
[   13.780000] usbserial: USB Serial support registered for generic
[   13.850000] xt_time: kernel timezone is -0000
[   13.870000] usbcore: registered new interface driver cdc_ether
[   13.880000] usbcore: registered new interface driver cdc_ncm
[   13.890000] PPP generic driver version 2.4.2
[   13.900000] PPP MPPE Compression module registered
[   13.910000] NET: Registered protocol family 24
[   13.910000] PPTP driver version 0.8.5
[   13.920000] usbcore: registered new interface driver sierra
[   13.930000] usbserial: USB Serial support registered for Sierra USB modem
[   13.950000] ath: EEPROM regdomain: 0x0
[   13.950000] ath: EEPROM indicates default country code should be used
[   13.950000] ath: doing EEPROM country->regdmn map search
[   13.950000] ath: country maps to regdmn code: 0x3a
[   13.950000] ath: Country alpha2 being used: US
[   13.950000] ath: Regpair used: 0x3a
[   13.970000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.970000] cfg80211: Calling CRDA for country: US
[   13.980000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
[   13.980000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   13.990000] ath: EEPROM regdomain: 0x0
[   13.990000] ath: EEPROM indicates default country code should be used
[   13.990000] ath: doing EEPROM country->regdmn map search
[   13.990000] ath: country maps to regdmn code: 0x3a
[   13.990000] ath: Country alpha2 being used: US
[   13.990000] ath: Regpair used: 0x3a
[   14.000000] cfg80211: Regulatory domain changed to country: US
[   14.010000] cfg80211:  DFS Master region: FCC
[   14.010000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   14.020000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   14.030000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[   14.040000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[   14.050000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   14.060000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   14.060000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   14.070000] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
[   14.080000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   14.090000] usbcore: registered new interface driver option
[   14.100000] usbserial: USB Serial support registered for GSM modem (1-port)
[   23.440000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.450000] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
[   23.460000] device eth0.1 entered promiscuous mode
[   23.460000] device eth0 entered promiscuous mode
[   23.480000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   23.520000] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[   23.790000] eth0: link up (1000Mbps/Full duplex)
[   23.840000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   23.840000] br-lan: port 1(eth0.1) entered forwarding state
[   23.850000] br-lan: port 1(eth0.1) entered forwarding state
[   23.860000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[   23.860000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[   23.930000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   25.130000] cfg80211: Calling CRDA for country: PL
[   25.130000] cfg80211: Regulatory domain changed to country: PL
[   25.140000] cfg80211:  DFS Master region: ETSI
[   25.140000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   25.150000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   25.160000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   25.170000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
[   25.180000] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s)
[   25.190000] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   25.850000] br-lan: port 1(eth0.1) entered forwarding state
[   27.370000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   27.380000] device wlan0 entered promiscuous mode
[   36.030000] br-lan: port 2(wlan0) entered forwarding state
[   36.030000] br-lan: port 2(wlan0) entered forwarding state
[   36.040000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   38.030000] br-lan: port 2(wlan0) entered forwarding state

Nie działa. u mnie też po aktualizacji extroot poszedł się...

It is I, Leclerc