PHP 5.4.5 (cgi-fcgi) (built: Mar 16 2013 19:59:42)
Copyright (c) 1997-2012 The PHP Group
Zend Engine v2.4.0, Copyright (c) 1998-2012 Zend Technologies
Segmentation fault

[Fri Aug 29 18:07:50 2014] [notice] SIGHUP received.  Attempting to restart
httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
[Fri Aug 29 18:07:50 2014] [info] Init: Seeding PRNG with 0 bytes of entropy
[Fri Aug 29 18:07:50 2014] [info] Init: Generating temporary RSA private keys (512/1024 bits)
[Fri Aug 29 18:07:51 2014] [info] Init: Generating temporary DH parameters (512/1024 bits)
[Fri Aug 29 18:07:51 2014] [info] Init: Initializing (virtual) servers for SSL
[Fri Aug 29 18:07:51 2014] [info] mod_ssl/2.2.15 compiled against Server: Apache/2.2.15, Library: OpenSSL/1.0.1d
[Fri Aug 29 18:07:51 2014] [notice] Apache/2.2.15 (Unix) mod_ssl/2.2.15 OpenSSL/1.0.1e configured -- resuming normal operations
[Fri Aug 29 18:07:51 2014] [info] Server built: Mar 16 2013 19:55:48
[Fri Aug 29 18:07:51 2014] [debug] prefork.c(1013): AcceptMutex: sysvsem (default: sysvsem)
[Fri Aug 29 18:07:51 2014] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 0 in child 65816044484750564 for worker 
[Fri Aug 29 18:07:51 2014] [debug] proxy_util.c(1934): proxy: initialized single connection worker 0 in child 2541486768462773 for ((null))
[Fri Aug 29 18:07:51 2014] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 0 in child 65816044484750564 for worker 
[Fri Aug 29 18:07:51 2014] [debug] proxy_util.c(1837): proxy: worker proxy:reverse already initialized
[Fri Aug 29 18:07:51 2014] [debug] proxy_util.c(1934): proxy: initialized single connection worker 0 in child 2541040091863989 for (proxy:reverse)
[Fri Aug 29 18:07:51 2014] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 0 in child 65816044484750564 for worker 
[Fri Aug 29 18:07:51 2014] [debug] proxy_util.c(1837): proxy: worker proxy:reverse already initialized
[Fri Aug 29 18:07:51 2014] [debug] proxy_util.c(1934): proxy: initialized single connection worker 0 in child 2541040091863989 for (proxy:reverse)
[Fri Aug 29 18:07:51 2014] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 0 in child 65816044484750564 for worker 
[Fri Aug 29 18:07:51 2014] [debug] proxy_util.c(1837): proxy: worker proxy:reverse already initialized
[Fri Aug 29 18:07:51 2014] [debug] proxy_util.c(1934): proxy: initialized single connection worker 0 in child 2541040091863989 for (proxy:reverse)
[Fri Aug 29 18:07:51 2014] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 0 in child 65816044484750564 for worker 
[Fri Aug 29 18:07:51 2014] [debug] proxy_util.c(1837): proxy: worker proxy:reverse already initialized
[Fri Aug 29 18:07:51 2014] [debug] proxy_util.c(1934): proxy: initialized single connection worker 0 in child 2541040091863989 for (proxy:reverse)
[Fri Aug 29 18:07:58 2014] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 0 in child 65816044484750564 for worker 
[Fri Aug 29 18:07:58 2014] [debug] proxy_util.c(1837): proxy: worker proxy:reverse already initialized
[Fri Aug 29 18:07:58 2014] [debug] proxy_util.c(1934): proxy: initialized single connection worker 0 in child 2541040091863989 for (proxy:reverse)

[PHP]

zend.ze1_compatibility_mode = Off

; Language Options

engine = On
;short_open_tag = Off
precision    =  12
y2k_compliance = On
output_buffering = Off
;output_handler =
zlib.output_compression = Off
;zlib.output_compression_level = -1
;zlib.output_handler =
implicit_flush = Off
unserialize_callback_func =
serialize_precision = 100

;open_basedir =
disable_functions =
disable_classes =

; Colors for Syntax Highlighting mode.  Anything that's acceptable in
; <span style="color: ???????"> would work.
;highlight.string  = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg      = #FFFFFF
;highlight.default = #0000BB
;highlight.html    = #000000

;ignore_user_abort = On
;realpath_cache_size = 16k
;realpath_cache_ttl = 120

; Miscellaneous

expose_php = On

; Resource Limits

max_execution_time = 30    ; Maximum execution time of each script, in seconds.
max_input_time = 60    ; Maximum amount of time each script may spend parsing request data.
;max_input_nesting_level = 64
memory_limit = 8M    ; Maximum amount of memory a script may consume.

; Error handling and logging

; Error Level Constants:
; E_ALL             - All errors and warnings (includes E_STRICT as of PHP 6.0.0)
; E_ERROR           - fatal run-time errors
; E_RECOVERABLE_ERROR  - almost fatal run-time errors
; E_WARNING         - run-time warnings (non-fatal errors)
; E_PARSE           - compile-time parse errors
; E_NOTICE          - run-time notices (these are warnings which often result
;                     from a bug in your code, but it's possible that it was
;                     intentional (e.g., using an uninitialized variable and
;                     relying on the fact it's automatically initialized to an
;                     empty string)
; E_STRICT            - run-time notices, enable to have PHP suggest changes
;                     to your code which will ensure the best interoperability
;                     and forward compatibility of your code
; E_CORE_ERROR      - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING    - warnings (non-fatal errors) that occur during PHP's
;                     initial startup
; E_COMPILE_ERROR   - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR      - user-generated error message
; E_USER_WARNING    - user-generated warning message
; E_USER_NOTICE     - user-generated notice message
; E_DEPRECATED      - warn about code that will not work in future versions
;                     of PHP
; E_USER_DEPRECATED - user-generated deprecation warnings
;
; Common Values:
;   E_ALL & ~E_NOTICE  (Show all errors, except for notices and coding standards warnings.)
;   E_ALL & ~E_NOTICE | E_STRICT  (Show all errors, except for notices)
;   E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR  (Show only errors)
;   E_ALL | E_STRICT  (Show all errors, warnings and notices including coding standards.)
; Default Value: E_ALL & ~E_NOTICE
error_reporting  =  E_ALL & ~E_NOTICE & ~E_STRICT

display_errors = On
display_startup_errors = On
log_errors = On
log_errors_max_len = 1024
ignore_repeated_errors = Off
ignore_repeated_source = Off
report_memleaks = On
;report_zend_debug = 0
track_errors = Off
;html_errors = Off
;docref_root = "/phpmanual/"
;docref_ext = .html
;error_prepend_string = "<font color=#ff0000>"
;error_append_string = "</font>"
; Log errors to specified file.
error_log = /var/log/php_errors.log
; Log errors to syslog.
;error_log = syslog

; Data Handling

;arg_separator.output = "&amp;"
;arg_separator.input = ";&"
variables_order = "EGPCS"
request_order = "GP"
register_globals = Off
register_long_arrays = Off
register_argc_argv = On
auto_globals_jit = On
post_max_size = 8M
;magic_quotes_gpc = Off
magic_quotes_runtime = Off
magic_quotes_sybase = Off
auto_prepend_file =
auto_append_file =
default_mimetype = "text/html"
;default_charset = "iso-8859-1"
;always_populate_raw_post_data = On

; Paths and Directories

; UNIX: "/path1:/path2"
;include_path = ".:/php/includes"
doc_root = "/www1"
user_dir =
extension_dir = "/usr/lib/php"
enable_dl = On
cgi.force_redirect = 0
;cgi.nph = 1
;cgi.redirect_status_env = ;
cgi.fix_pathinfo=1
;fastcgi.impersonate = 1;
;fastcgi.logging = 0
;cgi.rfc2616_headers = 0

; File Uploads

file_uploads = On
upload_tmp_dir = "/tmp"
upload_max_filesize = 2M
max_file_uploads = 20

; Fopen wrappers

allow_url_fopen = On
allow_url_include = Off
;from="john@doe.com"
;user_agent="PHP"
default_socket_timeout = 60
;auto_detect_line_endings = Off

; Dynamic Extensions

;extension=ctype.so
;extension=curl.so
;extension=dom.so
;extension=exif.so
;extension=ftp.so
extension=gd.so
;extension=gmp.so
;extension=hash.so
;extension=iconv.so
;extension=json.so
;extension=ldap.so
extension=mbstring.so
extension=mcrypt.so
extension=mysql.so
;extension=openssl.so
;extension=pcre.so
extension=pdo.so
;extension=pdo-mysql.so
;extension=pdo-pgsql.so
;extension=pdo_sqlite.so
;extension=pgsql.so
extension=session.so
;extension=soap.so
;extension=sockets.so
;extension=sqlite.so
;extension=sqlite3.so
extension=tokenizer.so
extension=xml.so
;extension=xmlreader.so
;extension=xmlwriter.so

; Module Settings

[APC]
apc.enabled = 1
apc.shm_segments = 1    ;The number of shared memory segments to allocate for the compiler cache.
apc.shm_size = 4M    ;The size of each shared memory segment.

[Date]
;date.timezone =
;date.default_latitude = 31.7667
;date.default_longitude = 35.2333
;date.sunrise_zenith = 90.583333
;date.sunset_zenith = 90.583333

[filter]
;filter.default = unsafe_raw
;filter.default_flags =

[iconv]
;iconv.input_encoding = ISO-8859-1
;iconv.internal_encoding = ISO-8859-1
;iconv.output_encoding = ISO-8859-1

[sqlite]
;sqlite.assoc_case = 0

[sqlite3]
;sqlite3.extension_dir =

[Pdo_mysql]
pdo_mysql.cache_size = 2000
pdo_mysql.default_socket=

[MySQL]
mysql.allow_local_infile = On
mysql.allow_persistent = On
mysql.cache_size = 2000
mysql.max_persistent = -1
mysql.max_links = -1
mysql.default_port =
mysql.default_socket =
mysql.default_host =
mysql.default_user =
mysql.default_password =
mysql.connect_timeout = 60
mysql.trace_mode = Off

[PostgresSQL]
pgsql.allow_persistent = On
pgsql.auto_reset_persistent = Off
pgsql.max_persistent = -1
pgsql.max_links = -1
pgsql.ignore_notice = 0
pgsql.log_notice = 0

[Session]
session.save_handler = files
session.save_path = "/tmp"
session.use_cookies = 1
;session.cookie_secure =
session.use_only_cookies = 1
session.name = PHPSESSID
session.auto_start = 0
session.cookie_lifetime = 0
session.cookie_path = /
session.cookie_domain =
session.cookie_httponly =
session.serialize_handler = php
session.gc_probability = 1
session.gc_divisor     = 100
session.gc_maxlifetime = 1440
session.bug_compat_42 = On
session.bug_compat_warn = On
session.referer_check =
session.entropy_length = 0
;session.entropy_file = /dev/urandom
session.entropy_file =
;session.entropy_length = 16
session.cache_limiter = nocache
session.cache_expire = 180
session.use_trans_sid = 0
session.hash_function = 0
session.hash_bits_per_character = 4
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=,fieldset="

[mbstring]
;mbstring.language = Japanese
;mbstring.internal_encoding = EUC-JP
;mbstring.http_input = auto
;mbstring.http_output = SJIS
;mbstring.encoding_translation = Off
;mbstring.detect_order = auto
;mbstring.substitute_character = none;
;mbstring.func_overload = 0
;mbstring.strict_detection = Off
;mbstring.http_output_conv_mimetype=
;mbstring.script_encoding=

[gd]
;gd.jpeg_ignore_warning = 0

[exif]
;exif.encode_unicode = ISO-8859-15
;exif.decode_unicode_motorola = UCS-2BE
;exif.decode_unicode_intel    = UCS-2LE
;exif.encode_jis =
;exif.decode_jis_motorola = JIS
;exif.decode_jis_intel    = JIS

[soap]
soap.wsdl_cache_enabled=1
soap.wsdl_cache_dir="/tmp"
soap.wsdl_cache_ttl=86400
soap.wsdl_cache_limit = 5

[sysvshm]
;sysvshm.init_mem = 10000

[ldap]
ldap.max_links = -1

[mcrypt]
;mcrypt.algorithms_dir=
;mcrypt.modes_dir=

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/foo_log"
# with ServerRoot set to "/usr" will be interpreted by the
# server as "/usr//var/log/foo_log".

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "/usr"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#

<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User nobody
Group nogroup

</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin you@example.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/www1"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# features.  
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/www1">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "/var/log/error_log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel debug

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog "/var/log/access_log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog "/var/log/access_log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
   #ScriptAlias /cgi-bin/ "/usr/share/cgi-bin/"
  

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock /var/log/cgisock
</IfModule>

#
# "/usr/share/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
#<Directory "/usr/share/cgi-bin">
#   AllowOverride None
#    Options None
#    Order allow,deny
#    Allow from all
#</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig /etc/apache/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
MIMEMagicFile /etc/apache/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
EnableSendfile off

# Supplemental configuration
#
# The configuration files in the /etc/apache/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# Server-pool management (MPM specific)
#Include /etc/apache/extra/httpd-mpm.conf

# Multi-language error messages
#Include /etc/apache/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include /etc/apache/extra/httpd-autoindex.conf

# Language settings
#Include /etc/apache/extra/httpd-languages.conf

# User home directories
#Include /etc/apache/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include /etc/apache/extra/httpd-info.conf

# Virtual hosts
#Include /etc/apache/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include /etc/apache/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include /etc/apache/extra/httpd-dav.conf

# Various default settings
#Include /etc/apache/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include /etc/apache/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
#<IfModule ssl_module>
#SSLRandomSeed startup builtin
#SSLRandomSeed connect builtin
#</IfModule>
 ScriptAlias /local-bin /usr/bin
AddHandler application/x-httpd-php5 php
    Action application/x-httpd-php5 /local-bin/php-cgi
    <Directory "/usr/bin">
        Order allow,deny
        Allow from all
    </Directory>

[client]
port        = 3306
socket        = /var/run/mysqld.sock

[mysqld]
user        = root
socket        = /var/run/mysqld.sock
port        = 3306
basedir        = /usr

############ Don't put this on the NAND #############
# Figure out where you are going to put the databases
# And run mysql_install_db --force
datadir        = /mysql/

######### This should also not go on the NAND #######
tmpdir        = /tmp/

skip-external-locking

bind-address        = 127.0.0.1

# Fine Tuning
key_buffer        = 2M
max_allowed_packet    = 2M
thread_stack        = 192K
thread_cache_size       = 8

# Here you can see queries with especially long duration
#log_slow_queries    = /var/log/mysql/mysql-slow.log
#long_query_time = 2
#log-queries-not-using-indexes

# The following can be used as easy to replay backup logs or for replication.
#server-id        = 1
#log_bin            = /var/log/mysql/mysql-bin.log
#expire_logs_days    = 10
#max_binlog_size         = 100M
#binlog_do_db        = include_database_name
#binlog_ignore_db    = include_database_name


[mysqldump]
quick
quote-names
max_allowed_packet    = 16M

[mysql]
#no-auto-rehash    # faster start of mysql but no tab completition

[isamchk]
key_buffer        = 16M