• Zarejestrowany: 2012-06-26
  • Posty: 36

Temat: IPv6 nie działa

Dzień dobry.
Od dłuższego czasu męczę się z konfiguracją według tego poradnika: http://andrek.info/artykuly/openwrt-ipv6-tunnel-broker/.
Mój problem polega na tym, że na routerze mogę pingować IPv6 np. google ird. (ping6 google.com) i działa. Jednak próba pingowania na windowsie 8.1 x64 zakończa się niepowodzeniem. Adres IPv6 na windowsie zaczyna się fe80. Ten test również nie wykrywa IPv6 http://test-ipv6.com/.
Bardzo proszę o pomoc. Czego może to być wina?
Router WR1043ND z gargoyle PL 1.6.1.1 (r40431)
Konfiguracje:

network: 

config interface 'loopback'
    option ifname 'lo'
    option proto 'static'
    option ipaddr '127.0.0.1'
    option netmask '255.0.0.0'

config interface 'lan'
    option ifname 'eth0.1'
    option type 'bridge'
    option proto 'static'
    option ipaddr '192.168.1.1'
    option netmask '255.255.255.0'
    option dns 'xxx.xx.xxx.x 8.8.8.8'
    option ip6assign  60
    option ip6hint  10

config interface 'wan'
    option ifname 'eth0.2'
    option proto 'static'
    option ipaddr 'xxx.xx.xxx.xxx'
    option netmask '255.255.255.128'
    option gateway 'xxx.xx.xxx.x'
    option dns 'xxx.xx.xxx.x 8.8.8.8'
    option peerdns '0'

config switch
    option name 'rtl8366rb'
    option reset '1'
    option enable_vlan '1'

config switch_vlan
    option device 'rtl8366rb'
    option vlan '1'
    option ports '1 2 3 4 5t'

config switch_vlan
    option device 'rtl8366rb'
    option vlan '2'
    option ports '0 5t'

config interface wan6
    option proto  6in4
    option peeraddr  '216.zz.zz.zzz'
    option ip6addr  '2001:xxx:xx:xxx::x/64'
    option ip6prefix  '2001:xxx:xx:xxx::/64'
    option tunnelid  'xxxxxx'
    option username  'zzzz'
    option password  'zzz'

firewall 

config defaults
    option syn_flood '1'
    option input 'ACCEPT'
    option output 'ACCEPT'
    option forward 'REJECT'

config zone
    option name 'lan'
    list network 'lan'
    option input 'ACCEPT'
    option output 'ACCEPT'
    option forward 'REJECT'

config zone
    option name 'wan'
    list network 'wan'
    list network 'wan6'
    option input 'REJECT'
    option output 'ACCEPT'
    option forward 'REJECT'
    option masq '1'
    option mtu_fix '1480'

config forwarding
    option src 'lan'
    option dest 'wan'

config rule
    option name 'Allow-DHCP-Renew'
    option src 'wan'
    option proto 'udp'
    option dest_port '68'
    option target 'ACCEPT'
    option family 'ipv4'

config rule
    option name 'Allow-Ping'
    option src 'wan'
    option proto 'icmp'
    option icmp_type 'echo-request'
    option family 'ipv4'
    option target 'ACCEPT'

config rule
    option name 'Allow-DHCPv6'
    option src 'wan'
    option proto 'udp'
    option src_ip 'fe80::/10'
    option src_port '547'
    option dest_ip 'fe80::/10'
    option dest_port '546'
    option family 'ipv6'
    option target 'ACCEPT'

config rule
    option name 'Allow-ICMPv6-Input'
    option src 'wan'
    option proto 'icmp'
    list icmp_type 'echo-request'
    list icmp_type 'echo-reply'
    list icmp_type 'destination-unreachable'
    list icmp_type 'packet-too-big'
    list icmp_type 'time-exceeded'
    list icmp_type 'bad-header'
    list icmp_type 'unknown-header-type'
    list icmp_type 'router-solicitation'
    list icmp_type 'neighbour-solicitation'
    list icmp_type 'router-advertisement'
    list icmp_type 'neighbour-advertisement'
    option limit '1000/sec'
    option family 'ipv6'
    option target 'ACCEPT'

config rule
    option name 'Allow-ICMPv6-Forward'
    option src 'wan'
    option dest '*'
    option proto 'icmp'
    list icmp_type 'echo-request'
    list icmp_type 'echo-reply'
    list icmp_type 'destination-unreachable'
    list icmp_type 'packet-too-big'
    list icmp_type 'time-exceeded'
    list icmp_type 'bad-header'
    list icmp_type 'unknown-header-type'
    option limit '1000/sec'
    option family 'ipv6'
    option target 'ACCEPT'

config include
    option path '/etc/firewall.user'
    option reload '1'

config include
    option type 'script'
    option path '/usr/lib/gargoyle_firewall_util/gargoyle_additions.firewall'
    option family 'IPv4'
    option reload '1'

config include 'miniupnpd'
    option type 'script'
    option path '/usr/share/miniupnpd/firewall.include'
    option family 'IPv4'
    option reload '1'

config include 'openvpn_include_file'
    option path '/etc/openvpn.firewall'
    option reload '1'

config redirect 'redirect_enabled_number_0'
    option name 'VoIP'
    option src 'wan'
    option dest 'lan'
    option proto 'udp'
    option src_dport '5060'
    option dest_ip '192.168.1.6'
    option dest_port '5060'

config rule
    option name 'HE-IP6'
    option src 'wan'
    option proto '41'
    option target 'ACCEPT'

i 6relayd 

config server default
    option network    lan
    option rd    server
    option dhcpv6    server
    option management_level 1


# Example #1: Create a relay for several networks in proxy mode
# This can be used to proxy Router Discovery, DHCPv6 and NDP.

#config server examplerelay
#    option master    'wan'
#    option network    'lan'
#    option rd    'relay'
#    option dhcpv6    'relay'
#    option ndp    'relay'


# Example #2: Provide Router Discovery and stateless DHCPv6 in server mode
# This can be used as a small radvd and stateless DHCPv6-server replacement.

#config server exampleserver
#    option network    'lan'
#    option rd    'server'
#    option dhcpv6    'server'
#    option fallback_relay    'rd dhcpv6 ndp'
#    option compat_ula 1
#    option master    wan6
#