• Zarejestrowany: 2011-11-28
  • Posty: 118

Temat: Huawei e3131-s2 i 3ginfo

Huawei e3131-s2 (orange), TP-Link TL-WDR4300 v1, gargoyle 1.6.0.2 (r39585), by obsy



próba konfiguracji zakończyła się fiaskiem, gdyż wywala mi że wpisałem błędny kod pin, a na pewno jest on poprawny


comgt 18:36:43 -> -- Error Report --
comgt 18:36:43 -> ---->                     ^
comgt 18:36:43 -> Error @103, line 7, Could not write to COM device. (1)


---------------------------------------------------------------
/dev/tty      /dev/ttyS10   /dev/ttyS13   /dev/ttyS2    /dev/ttyS5    /dev/ttyS8
/dev/ttyS0    /dev/ttyS11   /dev/ttyS14   /dev/ttyS3    /dev/ttyS6    /dev/ttyS9
/dev/ttyS1    /dev/ttyS12   /dev/ttyS15   /dev/ttyS4    /dev/ttyS7    /dev/ttyUSB0
---------------------------------------------------------------

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  1/800 us ( 0%), #Int=  2, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.03
S:  Manufacturer=Linux 3.3.8 ehci_hcd
S:  Product=Generic Platform EHCI Controller
S:  SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 4
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=05e3 ProdID=0608 Rev=77.64
S:  Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1058 ProdID=0901 Rev= 1.08
S:  Manufacturer=Western Digital
S:  Product=External HDD
S:  SerialNumber=57442D5743414E4B43323739343031
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=151d Rev= 1.02
S:  Manufacturer=HUAWEI
S:  Product=HUAWEI Mobile
C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=cdc_ncm
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:* If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=cdc_ncm
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=03 Driver=(none)
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=02 Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
---------------------------------------------------------------
3ginfo.@3ginfo[0]=3ginfo
3ginfo.@3ginfo[0].device=/dev/ttyUSB0
3ginfo.@3ginfo[0].pincode=3365
3ginfo.@3ginfo[0].http_port=81
3ginfo.@3ginfo[0].qos=0
3ginfo.@3ginfo[0].language=pl



w etc/config/network  jest prawidło

2 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,271

Odp: Huawei e3131-s2 i 3ginfo

To co zawsze - masz zły port ustawiony, /dev/ttyUSB2. Dlaczego nie przeczytałeś poradnika?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

3 Odpowiedź przez ratman_rush (edytowany przez ratman_rush 2014-02-25 18:54:29)

  • Zarejestrowany: 2011-11-28
  • Posty: 118

Odp: Huawei e3131-s2 i 3ginfo

ups big_smile nie przeczytałem, ale nie działa jak zmieniam do usb 4 próbowałem

3ginfo-test
Brak urzadzenia /dev/ttyUSB2!

4 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,271

Odp: Huawei e3131-s2 i 3ginfo

Owszem działa (np. mi). I co teraz? smile

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

5 Odpowiedź przez ratman_rush

  • Zarejestrowany: 2011-11-28
  • Posty: 118

Odp: Huawei e3131-s2 i 3ginfo

wlasnie edytowalem jak pisales

6 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,271

Odp: Huawei e3131-s2 i 3ginfo

ls -al /dev/ttyUSB*
logread

pokaż.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

7 Odpowiedź przez ratman_rush

  • Zarejestrowany: 2011-11-28
  • Posty: 118

Odp: Huawei e3131-s2 i 3ginfo

ls -al /dev/ttyUSB*
crw-rw-rw-    1 root     root      188,   0 Feb 25 13:18 /dev/ttyUSB0

logread
Feb 25 13:18:52 roUter local2.info chat[6277]: OK
Feb 25 13:18:52 roUter local2.info chat[6277]:  -- got it
Feb 25 13:18:52 roUter local2.info chat[6277]: send (AT+CGDCONT=1,"IP","internet"^M)
Feb 25 13:18:52 roUter local2.info chat[6277]: timeout set to 30 seconds
Feb 25 13:18:52 roUter local2.info chat[6277]: expect (OK)
Feb 25 13:18:52 roUter local2.info chat[6277]: ^M
Feb 25 13:18:52 roUter local2.info chat[6277]: AT+CGDCONT=1,"IP","internet"^M^M
Feb 25 13:18:52 roUter local2.info chat[6277]: OK
Feb 25 13:18:52 roUter local2.info chat[6277]:  -- got it
Feb 25 13:18:52 roUter local2.info chat[6277]: send (ATD*99***1#^M)
Feb 25 13:18:52 roUter local2.info chat[6277]: expect (CONNECT)
Feb 25 13:18:52 roUter local2.info chat[6277]: ^M
Feb 25 13:18:52 roUter local2.info chat[6277]: ATD*99***1#^M^M
Feb 25 13:18:52 roUter local2.info chat[6277]: CONNECT
Feb 25 13:18:52 roUter local2.info chat[6277]:  -- got it
Feb 25 13:18:52 roUter local2.info chat[6277]: send ( ^M)
Feb 25 13:18:52 roUter daemon.info pppd[6260]: Serial connection established.
Feb 25 13:18:52 roUter daemon.info pppd[6260]: Using interface 3g-wan
Feb 25 13:18:52 roUter daemon.notice pppd[6260]: Connect: 3g-wan <--> /dev/ttyUSB0
Feb 25 13:18:53 roUter daemon.info pppd[6260]: CHAP authentication succeeded: Welcome!!
Feb 25 13:18:53 roUter daemon.notice pppd[6260]: CHAP authentication succeeded
Feb 25 13:18:53 roUter kern.info kernel: [  324.600000] br-lan: port 2(wlan0) entered forwarding state
Feb 25 13:18:54 roUter user.notice upnp daemon: external interface not found, not starting
Feb 25 13:18:55 roUter user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Feb 25 13:18:55 roUter user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Feb 25 13:18:55 roUter daemon.warn pppd[6260]: Could not determine remote IP address: defaulting to 10.64.64.64
Feb 25 13:18:55 roUter daemon.notice pppd[6260]: local  IP address 10.199.118.7
Feb 25 13:18:55 roUter daemon.notice pppd[6260]: remote IP address 10.64.64.64
Feb 25 13:18:55 roUter daemon.notice pppd[6260]: primary   DNS address 217.116.104.104
Feb 25 13:18:55 roUter daemon.notice pppd[6260]: secondary DNS address 217.116.100.100
Feb 25 13:18:55 roUter daemon.notice netifd: Interface 'wan' is now up
Feb 25 13:18:58 roUter daemon.info dnsmasq[6417]: started, version 2.66 cachesize 150
Feb 25 13:18:58 roUter daemon.info dnsmasq[6417]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth
Feb 25 13:18:58 roUter daemon.info dnsmasq-dhcp[6417]: DHCP, IP range 192.168.1.100 -- 192.168.1.120, lease time 2d
Feb 25 13:18:58 roUter daemon.info dnsmasq[6417]: using local addresses only for domain lan
Feb 25 13:18:58 roUter daemon.info dnsmasq[6417]: reading /tmp/resolv.conf.auto
Feb 25 13:18:58 roUter daemon.info dnsmasq[6417]: using nameserver 217.116.100.100#53
Feb 25 13:18:58 roUter daemon.info dnsmasq[6417]: using nameserver 217.116.104.104#53
Feb 25 13:18:58 roUter daemon.warn dnsmasq[6417]: ignoring nameserver 192.168.1.1 - local interface
Feb 25 13:18:58 roUter daemon.info dnsmasq[6417]: using local addresses only for domain lan
Feb 25 13:18:58 roUter daemon.info dnsmasq[6417]: read /etc/hosts - 2 addresses
Feb 25 13:18:58 roUter daemon.info dnsmasq-dhcp[6417]: read /etc/ethers - 0 addresses
Feb 25 13:19:18 roUter daemon.notice miniupnpd[6685]: HTTP listening on port 5000
Feb 25 13:19:18 roUter daemon.notice miniupnpd[6685]: Listening for NAT-PMP traffic on port 5351
Feb 25 13:19:18 roUter user.notice firewall: Reloading firewall due to ifup of wan (3g-wan)
Feb 25 13:19:19 roUter kern.info kernel: [  349.890000] IMQ driver unloaded successfully.
Feb 25 13:19:19 roUter kern.info kernel: [  349.970000]         Hooked IMQ after mangle on INPUT
Feb 25 13:19:19 roUter kern.info kernel: [  349.970000]         Hooked IMQ after mangle on FORWARD
Feb 25 13:19:19 roUter kern.info kernel: [  349.970000] IMQ driver loaded successfully. (numdevs = 1, numqueues = 1)
Feb 25 13:19:54 roUter daemon.notice miniupnpd[7380]: HTTP listening on port 5000
Feb 25 13:19:54 roUter daemon.notice miniupnpd[7380]: Listening for NAT-PMP traffic on port 5351
Feb 25 13:20:10 roUter kern.info kernel: [  401.540000] IMQ driver unloaded successfully.
Feb 25 13:20:10 roUter kern.info kernel: [  401.580000]         Hooked IMQ after mangle on INPUT
Feb 25 13:20:10 roUter kern.info kernel: [  401.590000]         Hooked IMQ after mangle on FORWARD
Feb 25 13:20:10 roUter kern.info kernel: [  401.590000] IMQ driver loaded successfully. (numdevs = 1, numqueues = 1)
Feb 25 13:20:52 roUter daemon.notice miniupnpd[8168]: HTTP listening on port 5000
Feb 25 13:20:52 roUter daemon.notice miniupnpd[8168]: Listening for NAT-PMP traffic on port 5351
Feb 25 13:21:09 roUter daemon.info dnsmasq-dhcp[6417]: DHCPINFORM(br-lan) 192.168.1.103 00:24:1d:c0:e5:f4
Feb 25 13:21:09 roUter daemon.info dnsmasq-dhcp[6417]: DHCPACK(br-lan) 192.168.1.103 00:24:1d:c0:e5:f4 RATMAN
Feb 25 13:24:07 roUter authpriv.info dropbear[8208]: Child connection from 192.168.1.103:59438
Feb 25 13:24:13 roUter authpriv.notice dropbear[8208]: Password auth succeeded for 'root' from 192.168.1.103:59438
Feb 25 13:26:31 roUter authpriv.info dropbear[8280]: Child connection from 192.168.1.103:59451
Feb 25 13:26:35 roUter authpriv.notice dropbear[8280]: Password auth succeeded for 'root' from 192.168.1.103:59451
Feb 25 13:26:57 roUter authpriv.info dropbear[8353]: Child connection from 192.168.1.103:59452
Feb 25 13:27:03 roUter authpriv.notice dropbear[8353]: Password auth succeeded for 'root' from 192.168.1.103:59452
Feb 25 13:29:10 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 IEEE 802.11: authenticated
Feb 25 13:29:10 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 IEEE 802.11: associated (aid 1)
Feb 25 13:29:10 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: pairwise key handshake completed (WPA)
Feb 25 13:29:10 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 13:29:11 roUter daemon.info dnsmasq-dhcp[6417]: DHCPREQUEST(br-lan) 192.168.1.115 78:d6:f0:ef:2f:23
Feb 25 13:29:11 roUter daemon.info dnsmasq-dhcp[6417]: DHCPACK(br-lan) 192.168.1.115 78:d6:f0:ef:2f:23 android-55b6b0f9fd29cc43
Feb 25 13:36:54 roUter authpriv.info dropbear[8280]: Exit (root): Exited normally
Feb 25 13:36:54 roUter authpriv.info dropbear[8353]: Exit (root): Exited normally
Feb 25 13:37:13 roUter authpriv.info dropbear[8208]: Exit (root): Exited normally
Feb 25 13:38:51 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 13:48:51 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 13:58:51 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 14:08:51 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 14:18:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 14:28:51 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 14:38:51 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 14:48:51 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 14:58:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 15:08:51 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 15:14:13 roUter daemon.info dnsmasq-dhcp[6417]: DHCPINFORM(br-lan) 192.168.1.103 00:24:1d:c0:e5:f4
Feb 25 15:14:13 roUter daemon.info dnsmasq-dhcp[6417]: DHCPACK(br-lan) 192.168.1.103 00:24:1d:c0:e5:f4 RATMAN
Feb 25 15:18:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 15:28:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 15:34:54 roUter daemon.info dnsmasq-dhcp[6417]: DHCPINFORM(br-lan) 192.168.1.103 00:24:1d:c0:e5:f4
Feb 25 15:34:54 roUter daemon.info dnsmasq-dhcp[6417]: DHCPACK(br-lan) 192.168.1.103 00:24:1d:c0:e5:f4 RATMAN
Feb 25 15:38:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 15:48:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 15:58:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 16:08:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 16:18:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 16:28:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 16:38:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 16:48:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 16:55:08 roUter daemon.info dnsmasq-dhcp[6417]: DHCPINFORM(br-lan) 192.168.1.103 00:24:1d:c0:e5:f4
Feb 25 16:55:08 roUter daemon.info dnsmasq-dhcp[6417]: DHCPACK(br-lan) 192.168.1.103 00:24:1d:c0:e5:f4 RATMAN
Feb 25 16:58:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 17:08:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 17:18:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 17:28:29 roUter authpriv.info dropbear[8674]: Child connection from 192.168.1.103:59985
Feb 25 17:28:38 roUter authpriv.notice dropbear[8674]: Password auth succeeded for 'root' from 192.168.1.103:59985
Feb 25 17:28:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 17:36:01 roUter authpriv.info dropbear[8744]: Child connection from 192.168.1.103:59996
Feb 25 17:36:04 roUter authpriv.notice dropbear[8744]: Password auth succeeded for 'root' from 192.168.1.103:59996
Feb 25 17:36:46 roUter authpriv.info dropbear[8817]: Child connection from 192.168.1.103:59997
Feb 25 17:36:51 roUter authpriv.notice dropbear[8817]: Password auth succeeded for 'root' from 192.168.1.103:59997
Feb 25 17:38:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 17:48:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 17:58:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 18:08:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 18:18:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 18:28:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 18:37:22 roUter authpriv.info dropbear[8817]: Exit (root): Exited normally
Feb 25 18:38:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 18:45:11 roUter daemon.info dnsmasq-dhcp[6417]: DHCPINFORM(br-lan) 192.168.1.103 00:24:1d:c0:e5:f4
Feb 25 18:45:11 roUter daemon.info dnsmasq-dhcp[6417]: DHCPACK(br-lan) 192.168.1.103 00:24:1d:c0:e5:f4 RATMAN
Feb 25 18:48:52 roUter daemon.info hostapd: wlan0: STA 78:d6:f0:ef:2f:23 WPA: group key handshake completed (WPA)
Feb 25 18:53:17 roUter authpriv.info dropbear[9080]: Child connection from 192.168.1.103:60168
Feb 25 18:53:22 roUter authpriv.notice dropbear[9080]: Password auth succeeded for 'root' from 192.168.1.103:60168

8 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,271

Odp: Huawei e3131-s2 i 3ginfo

Coś masz nie tak, bo powinieneś mieć trzy lub cztery interfejsy. cat /proc/bus/usb/devices pokaż.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

9 Odpowiedź przez ratman_rush

  • Zarejestrowany: 2011-11-28
  • Posty: 118

Odp: Huawei e3131-s2 i 3ginfo

/proc/bus/usb/devices
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  1/800 us ( 0%), #Int=  2, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.03
S:  Manufacturer=Linux 3.3.8 ehci_hcd
S:  Product=Generic Platform EHCI Controller
S:  SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 4
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=05e3 ProdID=0608 Rev=77.64
S:  Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1058 ProdID=0901 Rev= 1.08
S:  Manufacturer=Western Digital
S:  Product=External HDD
S:  SerialNumber=57442D5743414E4B43323739343031
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=151d Rev= 1.02
S:  Manufacturer=HUAWEI
S:  Product=HUAWEI Mobile
C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=cdc_ncm
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:* If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=cdc_ncm
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=03 Driver=(none)
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=02 Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

10 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,271

Odp: Huawei e3131-s2 i 3ginfo

Masz inną odmianę modemu. E3131s-2 tak wyglądał: http://eko.one.pl/forum/viewtopic.php?pid=39530#p39530

A ty masz tylko jeden interfejs który służy do połączenia, więc nie uzyskasz w tym samym czasie z niego danych diagnostycznych.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

11 Odpowiedź przez ratman_rush

  • Zarejestrowany: 2011-11-28
  • Posty: 118

Odp: Huawei e3131-s2 i 3ginfo

jakies rozwiazanie, aby chociaz ustawic go raz a dobrze?? czy pod kompa musze podpinac aby ustawic

12 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,271

Odp: Huawei e3131-s2 i 3ginfo

A czasami majstrując na komputerze nie wyłączyłeś innych interfejsów, w tym diagnostycznego?

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

13 Odpowiedź przez ratman_rush (edytowany przez ratman_rush 2014-02-25 19:37:24)

  • Zarejestrowany: 2011-11-28
  • Posty: 118

Odp: Huawei e3131-s2 i 3ginfo

nie big_smile chodzi mi tylko aby byl widoczny zasieg :d bo za duze roznice w transferze mam jak stara pojdzie spac sprobuje na modemie 3g z plusa`a tez e 3131 zobacze jak bedzie big_smile

14 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,271

Odp: Huawei e3131-s2 i 3ginfo

W tym przypadku podczas działania transmisji nie masz jak tego odczytać. Więc nie będzie.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

15 Odpowiedź przez ratman_rush

  • Zarejestrowany: 2011-11-28
  • Posty: 118

Odp: Huawei e3131-s2 i 3ginfo

problem pojawia sie gdy w gargulcu ustawiamy "preferowane 3g" (kofiguracja/podstawowa/internetWAN) wiec to nie jest problem modemu wszystko dziala big_smile

16 Odpowiedź przez Maciejka

  • Zarejestrowany: 2014-03-15
  • Posty: 10

Odp: Huawei e3131-s2 i 3ginfo

Cześć,
Mam dokładnie taki sam modem jak Ty ratman_rush... Jak udało Ci się zmusić go do pokazywania 3ginfo? Mi wywala takie same komunikaty jak Tobie i też mam tylko jeden port:
root@Gargoyle:~# ls -al /dev/ttyUSB*
crw-rw-rw-    1 root     root      188,   0 Mar 15 13:02 /dev/ttyUSB0

Bedę wdzięczny za odpowiedź.

Pozdrawiam

17 Odpowiedź przez ratman_rush (edytowany przez ratman_rush 2014-03-15 19:42:28)

  • Zarejestrowany: 2011-11-28
  • Posty: 118

Odp: Huawei e3131-s2 i 3ginfo

taa teraz nie mam problemow big_smile
wylaczylem tylko wymuszone 3g, dalem na auto i smiga
(malo prawdopodobne ze to ma jakis zwiazek, ale zmienilem tez softa w tym modemie +simlock przy okazji)
ps. daj tu logi pewno ktos pomoze big_smile

18 Odpowiedź przez Maciejka

  • Zarejestrowany: 2014-03-15
  • Posty: 10

Odp: Huawei e3131-s2 i 3ginfo

Hej,
ja mam ustawione na auto (4g/3g/2g zależy od modemu) i nic...
poniżej logi:

Mar 16 14:08:29 Gargoyle kern.info kernel: [93041.000000] usb 1-1: USB disconnect, device number 7
Mar 16 14:08:29 Gargoyle daemon.notice pppd[13072]: Modem hangup
Mar 16 14:08:29 Gargoyle daemon.info pppd[13072]: Connect time 309.0 minutes.
Mar 16 14:08:29 Gargoyle daemon.info pppd[13072]: Sent 51218215 bytes, received 305455877 bytes.
Mar 16 14:08:29 Gargoyle daemon.notice pppd[13072]: Connection terminated.
Mar 16 14:08:29 Gargoyle kern.err kernel: [93041.000000] option: option_instat_callback: error -143
Mar 16 14:08:29 Gargoyle kern.info kernel: [93041.000000] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
Mar 16 14:08:29 Gargoyle kern.info kernel: [93041.010000] option 1-1:1.0: device disconnected
Mar 16 14:08:29 Gargoyle kern.info kernel: [93041.020000] cdc_ncm 1-1:1.1: wwan0: unregister 'cdc_ncm' usb-ehci-platform-1, Mobile Broadband Network Device
Mar 16 14:08:30 Gargoyle daemon.info pppd[13072]: Terminating on signal 15
Mar 16 14:08:30 Gargoyle daemon.info pppd[13072]: Exit.
Mar 16 14:08:30 Gargoyle daemon.notice netifd: Interface 'wan' is now down
Mar 16 14:09:10 Gargoyle daemon.info dnsmasq[9259]: reading /tmp/resolv.conf.auto
Mar 16 14:09:10 Gargoyle daemon.warn dnsmasq[9259]: ignoring nameserver 192.168.1.1 - local interface
Mar 16 14:09:10 Gargoyle daemon.info dnsmasq[9259]: using local addresses only for domain lan
Mar 16 14:13:45 Gargoyle kern.info kernel: [93356.850000] usb 1-1: new high-speed USB device number 8 using ehci-platform
Mar 16 14:13:45 Gargoyle kern.info kernel: [93357.000000] scsi9 : usb-storage 1-1:1.0
Mar 16 14:13:45 Gargoyle kern.info kernel: [93357.000000] scsi10 : usb-storage 1-1:1.1
Mar 16 14:13:45 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar 16 14:13:45 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/12d1:14fe for mode switching
Mar 16 14:13:45 Gargoyle syslog.notice usb_modeswitch: switching device 12d1:14fe on 001/008
Mar 16 14:13:45 Gargoyle kern.info kernel: [93357.210000] usb 1-1: USB disconnect, device number 8
Mar 16 14:13:50 Gargoyle kern.info kernel: [93362.560000] usb 1-1: new high-speed USB device number 9 using ehci-platform
Mar 16 14:13:51 Gargoyle kern.info kernel: [93362.710000] option 1-1:1.0: GSM modem (1-port) converter detected
Mar 16 14:13:51 Gargoyle kern.info kernel: [93362.710000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
Mar 16 14:13:51 Gargoyle kern.info kernel: [93362.720000] usb 1-1: MAC-Address: 0x58:0x2c:0x80:0x13:0x92:0x63
Mar 16 14:13:51 Gargoyle kern.info kernel: [93362.730000] cdc_ncm 1-1:1.1: wwan0: register 'cdc_ncm' at usb-ehci-platform-1, Mobile Broadband Network Device, 58:2c:80:13:92:63
Mar 16 14:13:51 Gargoyle kern.info kernel: [93362.740000] scsi11 : usb-storage 1-1:1.4
Mar 16 14:13:52 Gargoyle kern.notice kernel: [93363.740000] scsi 11:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
Mar 16 14:13:52 Gargoyle kern.notice kernel: [93363.750000] sd 11:0:0:0: [sda] Attached SCSI removable disk
Mar 16 14:14:18 Gargoyle user.notice usb-modeswitch: 1-1:1.1: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar 16 14:14:19 Gargoyle user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar 16 14:14:19 Gargoyle user.notice usb-modeswitch: 1-1:1.1: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar 16 14:14:19 Gargoyle user.notice usb-modeswitch: 1-1:1.2: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar 16 14:14:19 Gargoyle user.notice usb-modeswitch: 1-1:1.3: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar 16 14:14:20 Gargoyle user.notice usb-modeswitch: 1-1:1.4: Manufacturer=HUAWEI Product=HUAWEI_Mobile Serial=?
Mar 16 14:14:20 Gargoyle kern.notice kernel: [93391.670000] sd 11:0:0:0: [sda] 3854336 512-byte logical blocks: (1.97 GB/1.83 GiB)
Mar 16 14:14:20 Gargoyle kern.notice kernel: [93391.680000] sd 11:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar 16 14:14:20 Gargoyle kern.info kernel: [93391.690000]  sda: sda1
Mar 16 14:14:21 Gargoyle user.notice fstab: mount: mounting /dev/sda1 on /mnt/sda1 failed: Invalid argument
Mar 16 14:14:23 Gargoyle daemon.notice netifd: wan (31456): Trying to set PIN
Mar 16 14:14:24 Gargoyle daemon.notice netifd: wan (31456): PIN set successfully
Mar 16 14:14:26 Gargoyle daemon.notice pppd[31617]: pppd 2.4.5 started by root, uid 0
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: abort on (BUSY)
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: abort on (NO CARRIER)
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: abort on (ERROR)
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: report (CONNECT)
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: timeout set to 10 seconds
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: send (AT&F^M)
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: expect (OK)
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: AT&F^M^M
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: OK
Mar 16 14:14:27 Gargoyle local2.info chat[31621]:  -- got it
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: send (ATE1^M)
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: expect (OK)
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: ^M
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: ATE1^M^M
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: OK
Mar 16 14:14:27 Gargoyle local2.info chat[31621]:  -- got it
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: send (AT+CGDCONT=1,"IP","internet"^M)
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: timeout set to 30 seconds
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: expect (OK)
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: ^M
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: AT+CGDCONT=1,"IP","internet"^M^M
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: OK
Mar 16 14:14:27 Gargoyle local2.info chat[31621]:  -- got it
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: send (ATD*99***1#^M)
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: expect (CONNECT)
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: ^M
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: ATD*99***1#^M^M
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: CONNECT
Mar 16 14:14:27 Gargoyle local2.info chat[31621]:  -- got it
Mar 16 14:14:27 Gargoyle local2.info chat[31621]: send ( ^M)
Mar 16 14:14:27 Gargoyle daemon.info pppd[31617]: Serial connection established.
Mar 16 14:14:27 Gargoyle daemon.info pppd[31617]: Using interface 3g-wan
Mar 16 14:14:27 Gargoyle daemon.notice pppd[31617]: Connect: 3g-wan <--> /dev/ttyUSB0
Mar 16 14:14:28 Gargoyle daemon.info pppd[31617]: CHAP authentication succeeded: Welcome!!
Mar 16 14:14:28 Gargoyle daemon.notice pppd[31617]: CHAP authentication succeeded
Mar 16 14:14:31 Gargoyle daemon.warn pppd[31617]: Could not determine remote IP address: defaulting to 10.64.64.64
Mar 16 14:14:31 Gargoyle daemon.notice pppd[31617]: local  IP address 31.60.102.117
Mar 16 14:14:31 Gargoyle daemon.notice pppd[31617]: remote IP address 10.64.64.64
Mar 16 14:14:31 Gargoyle daemon.notice pppd[31617]: primary   DNS address 217.116.104.104
Mar 16 14:14:31 Gargoyle daemon.notice pppd[31617]: secondary DNS address 217.116.100.100
Mar 16 14:14:31 Gargoyle daemon.notice netifd: Interface 'wan' is now up
Mar 16 14:14:32 Gargoyle user.notice firewall: Reloading firewall due to ifup of wan (3g-wan)
Mar 16 14:14:33 Gargoyle daemon.info dnsmasq[9259]: reading /tmp/resolv.conf.auto
Mar 16 14:14:33 Gargoyle daemon.info dnsmasq[9259]: using nameserver 217.116.100.100#53
Mar 16 14:14:33 Gargoyle daemon.info dnsmasq[9259]: using nameserver 217.116.104.104#53
Mar 16 14:14:33 Gargoyle daemon.warn dnsmasq[9259]: ignoring nameserver 192.168.1.1 - local interface
Mar 16 14:14:33 Gargoyle daemon.info dnsmasq[9259]: using local addresses only for domain lan
Mar 16 14:14:37 Gargoyle daemon.info dnsmasq-dhcp[9259]: DHCPINFORM(br-lan) 192.168.1.188 18:03:73:7b:b7:54


p.s. podeślij link do softu jaki wgrałeś do modemu i jak to zrobić jeśli możesz.

Pozdrawiam

19 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,271

Odp: Huawei e3131-s2 i 3ginfo

Tzn "nic" w jakim sensie?

Ps. Zainwestuj w hub usb zasilany bo usb Ci rozłącza.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

20 Odpowiedź przez Maciejka

  • Zarejestrowany: 2014-03-15
  • Posty: 10

Odp: Huawei e3131-s2 i 3ginfo

Hej, "nic" to znaczy, cze po wykonaniu 3ginfo dostaję:
comgt 14:25:38 -> -- Error Report --
comgt 14:25:38 -> ---->                   ^
comgt 14:25:38 -> Error @152, line 10, Could not write to COM device. (1)

Błąd kodu PIN

a po wykonaniu 3ginfo-test:

comgt 14:26:20 -> -- Error Report --
comgt 14:26:20 -> ---->                     ^
comgt 14:26:20 -> Error @103, line 7, Could not write to COM device. (1)


---------------------------------------------------------------
/dev/tty      /dev/ttyS1    /dev/ttyS12   /dev/ttyS15   /dev/ttyS4    /dev/ttyS7    /dev/ttyUSB0
/dev/ttyATH0  /dev/ttyS10   /dev/ttyS13   /dev/ttyS2    /dev/ttyS5    /dev/ttyS8
/dev/ttyS0    /dev/ttyS11   /dev/ttyS14   /dev/ttyS3    /dev/ttyS6    /dev/ttyS9
---------------------------------------------------------------

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  1/800 us ( 0%), #Int=  1, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.03
S:  Manufacturer=Linux 3.3.8 ehci_hcd
S:  Product=Generic Platform EHCI Controller
S:  SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  9 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=151d Rev= 1.02
S:  Manufacturer=HUAWEI
S:  Product=HUAWEI Mobile
C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=cdc_ncm
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:* If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=cdc_ncm
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=03 Driver=(none)
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=02 Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
---------------------------------------------------------------
3ginfo.@3ginfo[0]=3ginfo
3ginfo.@3ginfo[0].http_port=81
3ginfo.@3ginfo[0].qos=0
3ginfo.@3ginfo[0].language=pl
3ginfo.@3ginfo[0].device=/dev/ttyUSB0
3ginfo.@3ginfo[0].script=ofnk


Modem wyjąłem z usb aby mieć "świeże" logi.

Pozdrawiam

21 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,271

Odp: Huawei e3131-s2 i 3ginfo

No tak, bo /dev/ttyUSB0 wykorzystujesz do połączenia, więc w tym czasie 3ginfo nie może odczytać informacji.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

22 Odpowiedź przez Maciejka

  • Zarejestrowany: 2014-03-15
  • Posty: 10

Odp: Huawei e3131-s2 i 3ginfo

ok, ale nie mam żadnego innego do wyboru...

23 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,271

Odp: Huawei e3131-s2 i 3ginfo

Tak nie masz, sam to pokazałeś.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona

24 Odpowiedź przez Maciejka

  • Zarejestrowany: 2014-03-15
  • Posty: 10

Odp: Huawei e3131-s2 i 3ginfo

ok. czy w jakiś sposób mogę zmusić w takim razie ten modem do pokazywania informacji ???

25 Odpowiedź przez Cezary

  • Skąd: Warszawa
  • Zarejestrowany: 2006-02-25
  • Posty: 116,271

Odp: Huawei e3131-s2 i 3ginfo

Rozłącz się - wtedy będziesz mógł  to zrobić.

Ew - szukaj innego softu który da więcej interfejsów, albo odpal picocoma na nim i sprawdź at^setport - może pcui jest dostępny a ty masz go po prostu wyłączonego.

Masz niepotrzebny router, uszkodzony czy nie - chętnie przygarnę go.

Cezary's Strona