zainstalowałem wszystko wg poradnika, z tą różnicą że inaczej ekstraktowałem firmware (zamiast z nazwa 02 to mam 01 - bo czytałem, ze to pomaga na bolączki jakie miałem z brakiem ładowania FW)

dd if=dvb-usb-it9135.fw ibs=1 skip=12866 count=5817 of=dvb-usb-it9135-01.fw

     4 drwxr-xr-x    1 root     root          4096 Feb 20 23:11 .
     4 drwxr-xr-x    1 root     root          4096 Sep  3 20:04 ..
     8 -rw-r--r--    1 root     root          5817 Feb 20 23:11 dvb-usb-it9135-01.fw

dmesg :

[  840.920000] it913x: Chip Version=02 Chip Type=9135
[  840.930000] it913x: Firmware Version 52887808
[  840.930000] it913x: USB 1 low speed mode - connect to USB 2 port
[  840.940000] it913x: Dual mode=0 Remote=5 Tuner Type=f
[  840.940000] dvb-usb: found a 'ITE 9135 Generic' in warm state.
[  840.950000] dvb-usb: will use the device's hardware PID filter (table count: 5).
[  840.960000] DVB: registering new adapter (ITE 9135 Generic)
[  840.970000] DVB: Unable to find symbol it913x_fe_attach()
[  840.970000] dvb-usb: no frontend was attached by 'ITE 9135 Generic'
[  840.980000] Couldn't load IR keymap rc-msi-digivox-iii
[  840.980000] Registered IR keymap rc-empty
[  840.990000] input: IR-receiver inside an USB DVB receiver as /devices/platform/ehci-platform/usb1/1-1/1-1.1/rc/rc0/input0
[  841.000000] rc0: IR-receiver inside an USB DVB receiver as /devices/platform/ehci-platform/usb1/1-1/1-1.1/rc/rc0
[  841.010000] dvb-usb: schedule remote query interval to 250 msecs.
[  841.010000] dvb-usb: ITE 9135 Generic successfully initialized and connected.
[  841.020000] it913x: DEV registering device driver
[  841.030000] usbcore: registered new interface driver it913x

root@Gargoyle:/usr/bin# ls -l /dev/dvb/adapter0/
crw-r--r--    1 root     root      212,   4 Feb 20 23:09 demux0
crw-r--r--    1 root     root      212,   5 Feb 20 23:09 dvr0
crw-r--r--    1 root     root      212,   7 Feb 20 23:09 net0

a tvheadend nie widzi urzadzenia ... http://192.168.1.1:9981/ => Configurations => DVB Inputs => pusta lista rozwijana

root@Gargoyle:/usr/bin# mumudvb -l
MuMuDVB Version 1.7.1
--- Build information ---
Built without CAM support.
Built without transcoding support.
Built with ATSC support.
Built with support for DVB API Version 5.
---------
Originally based on dvbstream 0.6 by (C) Dave Chapman 2001-2004
Released under the GPL.
Latest version available from http://mumudvb.braice.net/
Project from the cr@ns (http://www.crans.org)
by Brice DUBOST (mumudvb@braice.net)

Info:  DVB:  ==================================
Info:  DVB:          DVB CARDS LISTING
Info:  DVB:  ==================================

co jest nie tak ?

P.